use XZ instead of GZIP compression. remove old installer scripts

mk/image.mk

@@ -85,8 +85,8 @@ TARGET_KERNEL=		${ADK_TARGET_SYSTEM}-${ADK_TARGET_FS}-kernel
 INITRAMFS=		${ADK_TARGET_SYSTEM}-${ADK_TARGET_LIBC}-${ADK_TARGET_FS}
 ROOTFSSQUASHFS=		${ADK_TARGET_SYSTEM}-${ADK_TARGET_LIBC}-${ADK_TARGET_FS}.img
 ROOTFSJFFS2=		${ADK_TARGET_SYSTEM}-${ADK_TARGET_LIBC}-jffs2.img
-ROOTFSTARBALL=		${ADK_TARGET_SYSTEM}-${ADK_TARGET_LIBC}-${ADK_TARGET_FS}+kernel.tar.gz
-ROOTFSUSERTARBALL=	${ADK_TARGET_SYSTEM}-${ADK_TARGET_LIBC}-${ADK_TARGET_FS}.tar.gz
+ROOTFSTARBALL=		${ADK_TARGET_SYSTEM}-${ADK_TARGET_LIBC}-${ADK_TARGET_FS}+kernel.tar.xz
+ROOTFSUSERTARBALL=	${ADK_TARGET_SYSTEM}-${ADK_TARGET_LIBC}-${ADK_TARGET_FS}.tar.xz
 ROOTFSISO=		${ADK_TARGET_SYSTEM}-${ADK_TARGET_LIBC}.iso
 
 kernel-package: kernel-strip
@@ -103,7 +103,7 @@ kernel-package: kernel-strip
 ${FW_DIR}/${ROOTFSTARBALL}: ${TARGET_DIR}/.adk kernel-package
 	cd ${TARGET_DIR}; find . | sed -n '/^\.\//s///p' | \
 		sed "s#\(.*\)#:0:0::::::\1#" | sort | \
-		${STAGING_HOST_DIR}/usr/bin/cpio -o -Hustar -P | gzip -n9 >$@
+		${STAGING_HOST_DIR}/usr/bin/cpio -o -Hustar -P | $(XZ) -c >$@
 ifeq ($(ADK_TARGET_QEMU),y)
 	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
 endif
@@ -111,7 +111,7 @@ endif
 ${FW_DIR}/${ROOTFSUSERTARBALL}: ${TARGET_DIR}/.adk
 	cd ${TARGET_DIR}; find . | grep -v ./boot/ | sed -n '/^\.\//s///p' | \
 		sed "s#\(.*\)#:0:0::::::\1#" | sort | \
-		${STAGING_HOST_DIR}/usr/bin/cpio -o -Hustar -P | gzip -n9 >$@
+		${STAGING_HOST_DIR}/usr/bin/cpio -o -Hustar -P | $(XZ) -c >$@
 
 ${STAGING_TARGET_DIR}/${INITRAMFS}_list: ${TARGET_DIR}/.adk
 	env PATH='${HOST_PATH}' $(BASH) ${LINUX_DIR}/scripts/gen_initramfs_list.sh -u squash -g squash \

mk/vars.mk

@@ -215,6 +215,7 @@ HOST_STATIC_LLDFLAGS:= -all-static
 endif
 
 SED:=			PATH='${HOST_PATH}' sed -i -e
+XZ:=			PATH='${HOST_PATH}' xz
 LINUX_DIR:=		$(BUILD_DIR)/linux
 KERNEL_MODULE_FLAGS:=	ARCH=${ADK_TARGET_ARCH} \
 			PREFIX=/usr \

scripts/install-rb532.sh

@@ -1,100 +0,0 @@
-#!/usr/bin/env bash
-# This file is part of the OpenADK project. OpenADK is copyrighted
-# material, please see the LICENCE file in the top-level directory.
-
-if [ $(id -u) -ne 0 ];then
-	printf "Installation is only possible as root\n"
-	exit 1
-fi
-
-f=0
-for tool in parted sfdisk mkfs.ext4 tune2fs;do
-	if ! which $tool >/dev/null; then
-		echo "Checking if $tool is installed... failed"
-		f=1
-	fi
-done
-if [ $f -eq 1 ];then exit 1;fi
-
-if [ -z $1 ];then
-	printf "Please give your compact flash device as first parameter\n"
-	exit 1
-else
-	if [ -z $2 ];then
-		printf "Please give your install tar archive as second parameter\n"
-		exit 2
-	fi
-	if [ -f $2 ];then
-		printf "Installing $2 on $1\n"
-	else
-		printf "$2 is not a file, Exiting\n"
-		exit 1
-	fi
-	if [ -b $1 ];then
-		printf "Using $1 as CF disk for installation\n"
-		echo "WARNING: This will destroy all data on $1 - type Yes to continue!"
-		read y
-		if [ "$y" = "Yes" ];then
-			env LC_ALL=C sfdisk -l $1 2>&1 |grep 'No medium'
-			if [ $? -eq 0 ];then
-				echo "No medium found"
-				exit 1
-			else
-				printf "Starting with installation\n"
-			fi
-		else
-			printf "Exiting.\n"
-			exit 1
-		fi
-	else
-		printf "Sorry $1 is not a block device\n"
-		exit 1
-	fi
-fi
-	
-
-if [ $(mount | grep $1| wc -l) -ne 0 ];then
-	printf "Block device $1 is in use, please umount first.\n"
-	exit 1
-fi
-
-printf "Create partition and filesystem for rb532\n"
-rootpart=${1}2
-parted -s $1 mklabel msdos >/dev/null 2>&1
-sleep 2
-maxsize=$(env LC_ALL=C parted $1 -s unit cyl print |awk '/^Disk/ { print $3 }'|sed -e 's/cyl//')
-rootsize=$(($maxsize-2))
-
-parted -s $1 unit cyl mkpart primary ext2 0 2 >/dev/null 2>&1
-parted -s $1 unit cyl mkpart primary ext2 2 $rootsize >/dev/null 2>&1
-parted -s $1 unit cyl mkpart primary fat32 $rootsize $maxsize >/dev/null 2>&1
-parted -s $1 set 1 boot on >/dev/null 2>&1
-sfdisk --change-id $1 1 27 >/dev/null 2>&1
-sfdisk --change-id $1 3 88 >/dev/null 2>&1
-sleep 1
-mkfs.ext4 -q -O ^huge_file ${1}2
-tune2fs -c 0 -i 0 -m 1 ${rootpart} >/dev/null 2>&1
-if [ $? -eq 0 ];then
-	printf "Successfully disabled filesystem checks on ${rootpart}\n"
-else	
-	printf "Disabling filesystem checks failed, Exiting.\n"
-	exit 1
-fi	
-
-tmp=$(mktemp -d)
-mount -t ext4 ${rootpart} $tmp
-printf "Extracting install archive\n"
-tar -C $tmp -xzpf $2 
-dd if=$tmp/boot/kernel of=${1}1 bs=2048 >/dev/null 2>&1
-if [ $? -eq 0 ];then
-	printf "Installation of kernel successful.\n"
-	rm $tmp/boot/kernel
-else
-	printf "Installation of kernel failed.\n"
-fi
-printf "Fixing permissions\n"
-chmod 1777 $tmp/tmp
-chmod 4755 $tmp/bin/busybox
-umount $tmp
-printf "Successfully installed.\n"
-exit 0

scripts/install-rpi.sh

@@ -1,139 +0,0 @@
-#!/usr/bin/env bash
-# This file is part of the OpenADK project. OpenADK is copyrighted
-# material, please see the LICENCE file in the top-level directory.
-
-if [ $(id -u) -ne 0 ];then
-	echo "Installation is only possible as root"
-	exit 1
-fi
-
-f=0
-for tool in parted sfdisk mkfs.vfat mkfs.ext4;do
-	if ! which $tool >/dev/null; then
-		echo "Checking if $tool is installed... failed"
-		f=1
-	fi
-done
-if [ $f -eq 1 ];then exit 1;fi
-
-datadir=0
-keep=0
-while getopts "dk" ch; do
-	case $ch in
-		d)
-			datadir=1
-			;;
-		k)
-			keep=1
-			;;
-	esac
-done
-shift $((OPTIND - 1))
-
-if [ -z $1 ];then
-	echo "Please give your SD card device as first parameter"
-	exit 1
-else
-	if [ -z $2 ];then
-		echo "Please give your install tar archive as second parameter"
-		exit 1
-	fi
-	if [ -f $2 ];then
-		echo "Installing $2 on $1"
-	else
-		echo "$2 is not a file, exiting"
-		exit 1
-	fi
-	if [ -b $1 ];then
-		echo "Using $1 as SD card disk for installation"
-		echo "WARNING: This will destroy all data on $1 - type Yes to continue!"
-		read y
-		if [ "$y" = "Yes" ];then
-			env LC_ALL=C sfdisk -l $1 2>&1 |grep 'No medium'
-			if [ $? -eq 0 ];then
-				echo "No medium found"
-				exit 1
-			else
-				echo "Starting with installation"
-			fi
-		else
-			echo "Exiting."
-			exit 1
-		fi
-	else
-		echo "Sorry $1 is not a block device"
-		exit 1
-	fi
-fi
-	
-
-if [ $(mount | grep $1| wc -l) -ne 0 ];then
-	echo "Block device $1 is in use, please umount first"
-	exit 1
-fi
-
-echo "Wiping existing partitions"
-dd if=/dev/zero of=$1 bs=512 count=1 >/dev/null 2>&1
-sync
-
-echo "Create partition and filesystem for raspberry pi"
-rootpart=${1}2
-parted -s $1 mklabel msdos
-sleep 2
-maxsize=$(env LC_ALL=C parted $1 -s unit cyl print |awk '/^Disk/ { print $3 }'|sed -e 's/cyl//')
-
-if [ $datadir -eq 0 ];then
-	rootsize=$(($maxsize-2))
-else
-	rootsize=$(($maxsize-34))
-	datasize=$(($maxsize-2))
-fi
-
-parted -s $1 unit cyl mkpart primary fat32 -- 0 16
-if [ $datadir -eq 0 ];then
-	parted -s $1 unit cyl mkpart primary ext2 -- 16 $rootsize
-	parted -s $1 unit cyl mkpart primary fat32 $rootsize $maxsize
-	sfdisk --change-id $1 3 88 >/dev/null 2>&1
-else
-	parted -s $1 unit cyl mkpart primary ext2 -- 16 $rootsize
-	parted -s $1 unit cyl mkpart primary ext2 $rootsize $datasize
-	parted -s $1 unit cyl mkpart primary fat32 $datasize $maxsize
-	parted -s $1 set 1 boot on
-	sfdisk --change-id $1 4 88 >/dev/null 2>&1
-fi
-sleep 2
-mkfs.vfat ${1}1 >/dev/null
-mkfs.ext4 -F -q -O ^huge_file ${1}2
-if [ $datadir -eq 1 ];then
-	if [ $keep -eq 0 ];then
-		mkfs.ext4 -F -q -O ^huge_file ${1}3
-	fi
-fi
-sync
-sleep 2
-
-tmp=$(mktemp -d)
-mount -t ext4 ${rootpart} $tmp
-mkdir $tmp/boot
-if [ $datadir -eq 1 ];then
-	if [ $keep -eq 0 ];then
-		mkdir $tmp/data
-		mount -t ext4 ${1}3 $tmp/data
-		mkdir $tmp/data/mpd $tmp/data/xbmc
-		umount $tmp/data
-	fi
-fi
-mount -t vfat ${1}1 $tmp/boot
-sleep 1
-echo "Extracting install archive"
-tar -C $tmp -xzpf $2 
-echo "Fixing permissions"
-chmod 1777 $tmp/tmp
-chmod 4755 $tmp/bin/busybox
-if [ $datadir -eq 1 ];then
-	echo "/dev/mmcblk0p3	/data	ext4	rw	0	0" >>$tmp/etc/fstab
-fi
-umount $tmp/boot
-umount $tmp
-echo "Successfully installed."
-exit 0

scripts/install-solidrun.sh

@@ -1,143 +0,0 @@
-#!/usr/bin/env bash
-# This file is part of the OpenADK project. OpenADK is copyrighted
-# material, please see the LICENCE file in the top-level directory.
-
-if [ $(id -u) -ne 0 ];then
-	echo "Installation is only possible as root"
-	exit 1
-fi
-
-f=0
-for tool in parted sfdisk mkfs.ext4;do
-	if ! which $tool >/dev/null; then
-		echo "Checking if $tool is installed... failed"
-		f=1
-	fi
-done
-if [ $f -eq 1 ];then exit 1;fi
-
-datadir=0
-keep=0
-while getopts "dk" ch; do
-	case $ch in
-		d)
-			datadir=1
-			;;
-		k)
-			keep=1
-			;;
-	esac
-done
-shift $((OPTIND - 1))
-
-if [ -z $1 ];then
-	echo "Please give your SD card device as first parameter"
-	exit 1
-else
-	if [ -z $2 ];then
-		echo "Please give your install tar archive as second parameter"
-		exit 1
-	fi
-	if [ -f $2 ];then
-		echo "Installing $2 on $1"
-	else
-		echo "$2 is not a file, exiting"
-		exit 1
-	fi
-	if [ -z $3 ];then
-		echo "Please give your firmware directory as third parameter"
-		exit 1
-	fi
-	if [ ! -d $3 ];then
-		echo "$3 is not a directory, exiting"
-		exit 1
-	fi
-	if [ -b $1 ];then
-		echo "Using $1 as SD card disk for installation"
-		echo "WARNING: This will destroy all data on $1 - type Yes to continue!"
-		read y
-		if [ "$y" = "Yes" ];then
-			env LC_ALL=C sfdisk -l $1 2>&1 |grep 'No medium'
-			if [ $? -eq 0 ];then
-				echo "No medium found"
-				exit 1
-			else
-				echo "Starting with installation"
-			fi
-		else
-			echo "Exiting."
-			exit 1
-		fi
-	else
-		echo "Sorry $1 is not a block device"
-		exit 1
-	fi
-fi
-
-if [ $(mount | grep $1| wc -l) -ne 0 ];then
-	echo "Block device $1 is in use, please umount first"
-	exit 1
-fi
-
-maxsize=$(env LC_ALL=C parted $1 -s unit s print |awk '/^Disk/ { print $3 }'|sed -e 's/s//')
-maxsize=$(($maxsize-1))
-
-if [ $datadir -eq 0 ];then
-	rootsize=$(($maxsize-32768))
-	rootsizeend=$(($rootsize+1))
-else
-	rootsize=$(($maxsize-32768-131072))
-	rootsizeend=$(($rootsize+1))
-	datasize=$(($maxsize-32768))
-	datasizeend=$(($datasize+1))
-fi
-
-echo "Install bootloader for cubox-i/hummingboard"
-parted -s $1 mklabel msdos >/dev/null 2>&1
-dd if=${3}/SPL of=${1} bs=1K seek=1 >/dev/null 2>&1
-dd if=${3}/u-boot.img of=${1} bs=1K seek=42 >/dev/null 2>&1
-if [ $datadir -eq 0 ];then
-	parted -a optimal -s $1 unit s mkpart primary ext2 -- 2048 $rootsize >/dev/null 2>&1
-	parted -a optimal -s $1 unit s mkpart primary fat32 -- $rootsizeend $maxsize
-	sfdisk --change-id $1 2 88 >/dev/null 2>&1
-else
-	parted -a optimal -s $1 unit s mkpart primary ext2 -- 2048 $rootsize
-	parted -a optimal -s $1 unit s mkpart primary ext2 -- $rootsizeend $datasize
-	parted -a optimal -s $1 unit s mkpart primary fat32 -- $datasizeend $maxsize
-	sfdisk --change-id $1 3 88
-
-fi
-
-echo "Creating filesystem"
-mkfs.ext4 -F -q -O ^huge_file ${1}1
-sync
-if [ $datadir -eq 1 ];then
-        if [ $keep -eq 0 ];then
-                mkfs.ext4 -F -q -O ^huge_file ${1}2
-        fi
-fi
-
-tmp=$(mktemp -d)
-mount -t ext4 ${1}1 $tmp
-
-if [ $datadir -eq 1 ];then
-        if [ $keep -eq 0 ];then
-                mkdir $tmp/data
-                mount -t ext4 ${1}2 $tmp/data
-                mkdir $tmp/data/mpd $tmp/data/xbmc
-                umount $tmp/data
-        fi
-fi
-
-echo "Extracting install archive"
-tar -C $tmp -xzpf $2 
-if [ $datadir -eq 1 ];then
-	echo "/dev/mmcblk0p2    /data   ext4    rw      0       0" >>$tmp/etc/fstab
-fi
-echo "Fixing permissions"
-chmod 1777 $tmp/tmp
-chmod 4755 $tmp/bin/busybox
-cp ${3}/*.dtb $tmp/boot/
-umount $tmp
-echo "Successfully installed."
-exit 0

scripts/install.sh

@@ -511,7 +511,7 @@ case $target {
 
 (( quiet )) || print Extracting installation archive...
 mount_fs "$rootpart" "$R" ext4
-gzip -dc "$src" | (cd "$R"; tar -xpf -)
+xz -d "$src" | (cd "$R"; tar -xpf -)
 
 if (( datafssz )); then
 	mkdir -m0755 "$R"/data