openadk/target/linux/config/Config.in.fsnet

menu "Network filesystems"

config ADK_KERNEL_FS_POSIX_ACL
	boolean
	default y

config ADK_KERNEL_CIFS
	prompt "CIFS support"
	tristate
	select ADK_KERNEL_NETWORK_FILESYSTEMS
	select ADK_KERNEL_CRYPTO_MD4
        select ADK_KERNEL_CRYPTO_MD5
        select ADK_KERNEL_CRYPTO_HMAC
        select ADK_KERNEL_CRYPTO_ARC4
        select ADK_KERNEL_CRYPTO_ECB
        select ADK_KERNEL_CRYPTO_DES
        select ADK_KERNEL_CRYPTO_SHA256
	default m if ADK_PACKAGE_CIFS_UTILS
	default n
	help
	  This is the client VFS module for the Common Internet File System
	  (CIFS) protocol which is the successor to the Server Message Block 
	  (SMB) protocol, the native file sharing mechanism for most early
	  PC operating systems.  The CIFS protocol is fully supported by 
	  file servers such as Windows 2000 (including Windows 2003, NT 4  
	  and Windows XP) as well by Samba (which provides excellent CIFS
	  server support for Linux and many other operating systems). Limited
	  support for Windows ME and similar servers is provided as well. 
	  You must use the smbfs client filesystem to access older SMB servers
	  such as OS/2 and DOS.

	  The intent of the cifs module is to provide an advanced
	  network file system client for mounting to CIFS compliant servers, 
	  including support for dfs (hierarchical name space), secure per-user
	  session establishment, safe distributed caching (oplock), optional
	  packet signing, Unicode and other internationalization improvements, 
	  and optional Winbind (nsswitch) integration. You do not need to enable
	  cifs if running only a (Samba) server. It is possible to enable both
	  smbfs and cifs (e.g. if you are using CIFS for accessing Windows 2003
	  and Samba 3 servers, and smbfs for accessing old servers). If you need 
	  to mount to Samba or Windows from this machine, say Y.

config ADK_KERNEL_CODA_FS
	prompt "Support for CODA filesystem"
	tristate
	select ADK_KERNEL_NETWORK_FILESYSTEMS
	default n
	help
	  This is the kernel part of the client for the CODA filesystem.

config ADK_KERNEL_NFS_V4
	boolean
	select ADK_KERNEL_NETWORK_FILESYSTEMS
	default y if ADK_PACKAGE_NFS_UTILS_V4
	default n

config ADK_KERNEL_NFS_FS
	prompt "NFS client support"
	tristate
	select ADK_KERNEL_NFS_V3
	select ADK_KERNEL_FILE_LOCKING
	select ADK_KERNEL_DNOTIFY
	select ADK_KERNEL_SUNRPC
	select ADK_KERNEL_LOCKD
	select ADK_KERNEL_NETWORK_FILESYSTEMS
	default m if ADK_PACKAGE_NFS_UTILS_CLIENT
	default n
	help
	  If you are connected to some other (usually local) Unix computer
	  (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
	  on that computer (the NFS server) using the Network File Sharing
	  protocol, say Y. "Mounting files" means that the client can access
	  the files with usual UNIX commands as if they were sitting on the
	  client's hard disk. For this to work, the server must run the
	  programs nfsd and mountd (but does not need to have NFS file system
	  support enabled in its kernel). NFS is explained in the Network
	  Administrator's Guide, available from
	  <http://www.tldp.org/docs.html#guide>, on its man page: "man
	  nfs", and in the NFS-HOWTO.

	  A superior but less widely used alternative to NFS is provided by
	  the Coda file system; see "Coda file system support" below.

	  If you say Y here, you should have said Y to TCP/IP networking also.
	  This option would enlarge your kernel by about 27 KB.

	  To compile this file system support as a module, choose M here: the
	  module will be called nfs.

	  If you are configuring a diskless machine which will mount its root
	  file system over NFS at boot time, say Y here and to "Kernel
	  level IP autoconfiguration" above and to "Root file system on NFS"
	  below. You cannot compile this driver as a module in this case.
	  There are two packages designed for booting diskless machines over
	  the net: netboot, available from
	  <http://ftp1.sourceforge.net/netboot/>, and Etherboot,
	  available from <http://ftp1.sourceforge.net/etherboot/>.

	  If you don't know what all this is about, say N.
	  Kernel modules for NFS client support

config ADK_KERNEL_NFSD_V3
	boolean
	default n

config ADK_KERNEL_NFSD_V4
	boolean
	select ADK_KERNEL_SUNRPC_GSS
	default y if ADK_PACKAGE_NFS_UTILS_V4
	default n

config ADK_KERNEL_NFSD
	prompt "NFS server support"
	tristate
	select ADK_KERNEL_EXPORTFS
	select ADK_KERNEL_NFSD_V3
	select ADK_KERNEL_DNOTIFY
	select ADK_KERNEL_FILE_LOCKING
	select ADK_KERNEL_SUNRPC
	select ADK_KERNEL_LOCKD
	select ADK_KERNEL_NETWORK_FILESYSTEMS
	default m if ADK_PACKAGE_NFS_UTILS_SERVER
	default n
	help
	  If you want your Linux box to act as an NFS *server*, so that other
	  computers on your local network which support NFS can access certain
	  directories on your box transparently, you have two options: you can
	  use the self-contained user space program nfsd, in which case you
	  should say N here, or you can say Y and use the kernel based NFS
	  server. The advantage of the kernel based solution is that it is
	  faster.

	  In either case, you will need support software; the respective
	  locations are given in the file <file:Documentation/Changes> in the
	  NFS section.

	  If you say Y here, you will get support for version 2 of the NFS
	  protocol (NFSv2). If you also want NFSv3, say Y to the next question
	  as well.

	  Please read the NFS-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>.

config ADK_KERNEL_LOCKD
	tristate
	default n

config ADK_KERNEL_SUNRPC
	tristate
	default n

config ADK_KERNEL_SUNRPC_GSS
	tristate
	select ADK_KERNEL_SUNRPC
	default n

config ADK_KERNEL_RPCSEC_GSS_KRB5
	prompt "RPC security support"
	tristate
	select ADK_KERNEL_NETWORK_FILESYSTEMS
	select ADK_KERNEL_SUNRPC_GSS
	select ADK_KERNEL_SUNRPC
	select ADK_KERNEL_CRYPTO
	select ADK_KERNEL_CRYPTO_MD5
	select ADK_KERNEL_CRYPTO_DES
	select ADK_KERNEL_CRYPTO_CBC
	select ADK_KERNEL_CRYPTO_CTS
	select ADK_KERNEL_CRYPTO_ECB
	select ADK_KERNEL_CRYPTO_HMAC
	select ADK_KERNEL_CRYPTO_SHA1
	select ADK_KERNEL_CRYPTO_AES
	select ADK_KERNEL_CRYPTO_ARC4
	default m if ADK_PACKAGE_NFS_UTILS_V4
	default n
	help

endmenu