1
0

Config.in.block 13 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502
  1. config ADK_KERNEL_MD
  2. boolean
  3. config ADK_KERNEL_LBD
  4. boolean
  5. config ADK_KERNEL_BLK_DEV_IO_TRACE
  6. boolean
  7. config ADK_KERNEL_LSF
  8. boolean
  9. config ADK_KERNEL_IOSCHED_AS
  10. boolean
  11. config ADK_KERNEL_IOSCHED_DEADLINE
  12. boolean
  13. config ADK_KERNEL_IOSCHED_CFQ
  14. boolean
  15. config ADK_KERNEL_SCSI
  16. boolean
  17. config ADK_KERNEL_SCSI_DMA
  18. boolean
  19. config ADK_KERNEL_SCSI_MULTI_LUN
  20. boolean
  21. config ADK_KERNEL_SCSI_CONSTANTS
  22. boolean
  23. config ADK_KERNEL_SCSI_LOGGING
  24. boolean
  25. config ADK_KERNEL_SCSI_SCAN_ASYNC
  26. boolean
  27. config ADK_KERNEL_BLK_DEV_SD
  28. boolean
  29. config ADK_KERNEL_BLK_DEV_SR
  30. boolean
  31. config ADK_KERNEL_ISCSI_TCP
  32. boolean
  33. config ADK_KERNEL_DM_CRYPT
  34. boolean
  35. config ADK_KERNEL_BLK_DEV
  36. boolean
  37. config ADK_KERNEL_BLK_DEV_DM
  38. boolean
  39. select ADK_KERNEL_MD
  40. config ADK_KERNEL_ATA
  41. boolean
  42. config ADK_KERNEL_ATA_SFF
  43. boolean
  44. config ADK_KERNEL_ATA_BMDMA
  45. boolean
  46. config ADK_KERNEL_SATA_AHCI_PLATFORM
  47. boolean
  48. config ADK_KERNEL_SATA_PMP
  49. boolean
  50. config ADK_KERNEL_AHCI_IMX
  51. boolean
  52. config ADK_KERNEL_CONNECTOR
  53. boolean
  54. config ADK_KERNEL_MMC
  55. boolean
  56. config ADK_KERNEL_MMC_BLOCK
  57. boolean
  58. config ADK_KERNEL_MMC_BLOCK_BOUNCE
  59. boolean
  60. config ADK_KERNEL_MMC_UNSAFE_RESUME
  61. boolean
  62. config ADK_KERNEL_MMC_SDHCI
  63. boolean
  64. config ADK_KERNEL_MMC_SDHCI_IO_ACCESSORS
  65. boolean
  66. config ADK_KERNEL_MMC_SDHCI_PLTFM
  67. boolean
  68. config ADK_KERNEL_MMC_SDHCI_BCM2708_DMA
  69. boolean
  70. config ADK_KERNEL_ATA_PIIX
  71. select ADK_KERNEL_SCSI
  72. select ADK_KERNEL_SCSI_DMA
  73. select ADK_KERNEL_ATA
  74. select ADK_KERNEL_ATA_SFF
  75. select ADK_KERNEL_ATA_BMDMA
  76. select ADK_KERNEL_BLK_DEV
  77. select ADK_KERNEL_BLK_DEV_SD
  78. boolean
  79. config ADK_KERNEL_SCSI_SYM53C8XX_2
  80. select ADK_KERNEL_SCSI
  81. select ADK_KERNEL_BLK_DEV
  82. select ADK_KERNEL_BLK_DEV_SD
  83. boolean
  84. config ADK_KERNEL_SCSI_IBMVSCSI
  85. select ADK_KERNEL_SCSI
  86. select ADK_KERNEL_BLK_DEV
  87. select ADK_KERNEL_BLK_DEV_SD
  88. boolean
  89. config ADK_KERNEL_SCSI_SUNESP
  90. select ADK_KERNEL_SCSI
  91. select ADK_KERNEL_BLK_DEV
  92. select ADK_KERNEL_BLK_DEV_SD
  93. boolean
  94. config ADK_KERNEL_PATA_MACIO
  95. select ADK_KERNEL_SCSI
  96. select ADK_KERNEL_ATA
  97. select ADK_KERNEL_ATA_SFF
  98. select ADK_KERNEL_ATA_BMDMA
  99. select ADK_KERNEL_BLK_DEV
  100. select ADK_KERNEL_BLK_DEV_SD
  101. boolean
  102. config ADK_KERNEL_PATA_PLATFORM
  103. select ADK_KERNEL_SCSI
  104. select ADK_KERNEL_ATA
  105. select ADK_KERNEL_ATA_SFF
  106. select ADK_KERNEL_ATA_BMDMA
  107. select ADK_KERNEL_BLK_DEV
  108. select ADK_KERNEL_BLK_DEV_SD
  109. boolean
  110. config ADK_KERNEL_PATA_PCMCIA
  111. boolean
  112. config ADK_KERNEL_PATA_IMX
  113. boolean
  114. select ADK_KERNEL_SCSI
  115. select ADK_KERNEL_ATA
  116. select ADK_KERNEL_ATA_SFF
  117. select ADK_KERNEL_ATA_BMDMA
  118. select ADK_KERNEL_BLK_DEV
  119. select ADK_KERNEL_BLK_DEV_SD
  120. select ADK_KERNEL_ATA
  121. select ADK_KERNEL_AHCI_IMX
  122. select ADK_KERNEL_SATA_PMP
  123. select ADK_KERNEL_SATA_AHCI_PLATFORM
  124. default y if ADK_TARGET_SYSTEM_CUBOX_I
  125. default n
  126. config ADK_KERNEL_PATA_PXA
  127. boolean
  128. select ADK_KERNEL_SCSI
  129. select ADK_KERNEL_ATA
  130. select ADK_KERNEL_ATA_SFF
  131. select ADK_KERNEL_ATA_BMDMA
  132. select ADK_KERNEL_BLK_DEV
  133. select ADK_KERNEL_BLK_DEV_SD
  134. select ADK_KERNEL_PATA_PCMCIA
  135. default y if ADK_TARGET_SYSTEM_SHARP_ZAURUS
  136. default n
  137. config ADK_KERNEL_MMC_AT91
  138. boolean
  139. select ADK_KERNEL_SCSI
  140. select ADK_KERNEL_MMC
  141. select ADK_KERNEL_MMC_BLOCK
  142. select ADK_KERNEL_BLK_DEV
  143. select ADK_KERNEL_BLK_DEV_SD
  144. default y if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
  145. default n
  146. config ADK_KERNEL_MMC_SDHCI_BCM2708
  147. boolean
  148. select ADK_KERNEL_SCSI
  149. select ADK_KERNEL_MMC
  150. select ADK_KERNEL_MMC_BLOCK
  151. select ADK_KERNEL_BLK_DEV
  152. select ADK_KERNEL_BLK_DEV_SD
  153. select ADK_KERNEL_MMC_SDHCI
  154. select ADK_KERNEL_MMC_SDHCI_IO_ACCESSORS
  155. select ADK_KERNEL_MMC_SDHCI_PLTFM
  156. select ADK_KERNEL_MMC_SDHCI_BCM2708_DMA
  157. default y if ADK_TARGET_SYSTEM_RASPBERRY_PI
  158. default n
  159. config ADK_KERNEL_MMC_SDHCI_ESDHC_IMX
  160. boolean
  161. select ADK_KERNEL_SCSI
  162. select ADK_KERNEL_SCSI_DMA
  163. select ADK_KERNEL_SCSI_MULTI_LUN
  164. select ADK_KERNEL_SCSI_CONSTANTS
  165. select ADK_KERNEL_SCSI_LOGGING
  166. select ADK_KERNEL_SCSI_SCAN_ASYNC
  167. select ADK_KERNEL_MMC
  168. select ADK_KERNEL_MMC_BLOCK
  169. select ADK_KERNEL_MMC_BLOCK_BOUNCE
  170. select ADK_KERNEL_BLK_DEV
  171. select ADK_KERNEL_BLK_DEV_SD
  172. select ADK_KERNEL_MMC_SDHCI
  173. select ADK_KERNEL_MMC_SDHCI_IO_ACCESSORS
  174. select ADK_KERNEL_MMC_SDHCI_PLTFM
  175. select ADK_KERNEL_MMC_UNSAFE_RESUME
  176. default y if ADK_TARGET_SYSTEM_CUBOX_I
  177. default n
  178. config ADK_KERNEL_PATA_RB532
  179. boolean
  180. select ADK_KERNEL_SCSI
  181. select ADK_KERNEL_ATA
  182. select ADK_KERNEL_ATA_SFF
  183. select ADK_KERNEL_ATA_BMDMA
  184. select ADK_KERNEL_BLK_DEV
  185. select ADK_KERNEL_BLK_DEV_SD
  186. default y if ADK_TARGET_SYSTEM_MIKROTIK_RB532
  187. default n
  188. config ADK_KERNEL_PATA_AMD
  189. boolean
  190. select ADK_KERNEL_SCSI
  191. select ADK_KERNEL_ATA
  192. select ADK_KERNEL_ATA_SFF
  193. select ADK_KERNEL_ATA_BMDMA
  194. select ADK_KERNEL_BLK_DEV
  195. select ADK_KERNEL_BLK_DEV_SD
  196. default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D2
  197. default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D13
  198. default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C
  199. default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
  200. default n
  201. config ADK_KERNEL_PATA_SC1200
  202. boolean
  203. select ADK_KERNEL_SCSI
  204. select ADK_KERNEL_ATA
  205. select ADK_KERNEL_ATA_SFF
  206. select ADK_KERNEL_ATA_BMDMA
  207. select ADK_KERNEL_BLK_DEV
  208. select ADK_KERNEL_BLK_DEV_SD
  209. default y if ADK_TARGET_SYSTEM_PCENGINES_WRAP
  210. default n
  211. config ADK_KERNEL_PATA_JMICRON
  212. boolean
  213. select ADK_KERNEL_SCSI
  214. select ADK_KERNEL_ATA
  215. select ADK_KERNEL_ATA_SFF
  216. select ADK_KERNEL_ATA_BMDMA
  217. select ADK_KERNEL_BLK_DEV
  218. select ADK_KERNEL_BLK_DEV_SD
  219. default n
  220. config ADK_KERNEL_SATA_AHCI
  221. tristate
  222. select ADK_KERNEL_SCSI
  223. select ADK_KERNEL_ATA
  224. select ADK_KERNEL_BLK_DEV
  225. select ADK_KERNEL_BLK_DEV_SD
  226. depends on ADK_TARGET_WITH_SATA
  227. default y if ADK_TARGET_SYSTEM_VBOX_I686
  228. default n
  229. menu "Block devices support"
  230. config ADK_KPACKAGE_KMOD_SATA_AHCI
  231. prompt "AHCI SATA driver"
  232. tristate
  233. select ADK_KERNEL_ATA
  234. select ADK_KERNEL_BLK_DEV_SD
  235. depends on !ADK_KERNEL_SATA_AHCI
  236. depends on ADK_TARGET_WITH_SATA
  237. default n
  238. help
  239. Enables support for AHCI Serial ATA.
  240. config ADK_KPACKAGE_KMOD_BLK_DEV_LOOP
  241. prompt "Loop mount support"
  242. tristate
  243. select ADK_KERNEL_BLK_DEV
  244. default n
  245. help
  246. Saying Y here will allow you to use a regular file as a block
  247. device; you can then create a file system on that block device and
  248. mount it just as you would mount other block devices such as hard
  249. drive partitions, CD-ROM drives or floppy drives. The loop devices
  250. are block special device files with major number 7 and typically
  251. called /dev/loop0, /dev/loop1 etc.
  252. This is useful if you want to check an ISO 9660 file system before
  253. burning the CD, or if you want to use floppy images without first
  254. writing them to floppy. Furthermore, some Linux distributions avoid
  255. the need for a dedicated Linux partition by keeping their complete
  256. root file system inside a DOS FAT file using this loop device
  257. driver.
  258. To use the loop device, you need the losetup utility, found in the
  259. util-linux package, see
  260. <ftp://ftp.kernel.org/pub/linux/utils/util-linux/>.
  261. The loop device driver can also be used to "hide" a file system in
  262. a disk partition, floppy, or regular file, either using encryption
  263. (scrambling the data) or steganography (hiding the data in the low
  264. bits of, say, a sound file). This is also safe if the file resides
  265. on a remote file server.
  266. There are several ways of encrypting disks. Some of these require
  267. kernel patches. The vanilla kernel offers the cryptoloop option
  268. and a Device Mapper target (which is superior, as it supports all
  269. file systems). If you want to use the cryptoloop, say Y to both
  270. LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12
  271. or later) version of util-linux. Additionally, be aware that
  272. the cryptoloop is not safe for storing journaled filesystems.
  273. Note that this loop device has nothing to do with the loopback
  274. device used for network connections from the machine to itself.
  275. config ADK_KPACKAGE_KMOD_BLK_DEV_NBD
  276. prompt "Network Block Device support"
  277. tristate
  278. default n
  279. help
  280. Saying Y here will allow your computer to be a client for network
  281. block devices, i.e. it will be able to use block devices exported by
  282. servers (mount file systems on them etc.). Communication between
  283. client and server works over TCP/IP networking, but to the client
  284. program this is hidden: it looks like a regular local file access to
  285. a block device special file such as /dev/nd0.
  286. Network block devices also allows you to run a block-device in
  287. userland (making server and client physically the same computer,
  288. communicating using the loopback network device).
  289. Read <file:Documentation/nbd.txt> for more information, especially
  290. about where to find the server code, which runs in user space and
  291. does not need special kernel support.
  292. Note that this has nothing to do with the network file systems NFS
  293. or Coda; you can say N here even if you intend to use NFS or Coda.
  294. config ADK_KPACKAGE_KMOD_SCSI
  295. prompt "SCSI support"
  296. select ADK_KERNEL_LBD
  297. select ADK_KERNEL_LSF
  298. select ADK_KERNEL_IOSCHED_AS
  299. depends on !ADK_KERNEL_SCSI
  300. tristate
  301. help
  302. If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
  303. any other SCSI device under Linux, say Y and make sure that you know
  304. the name of your SCSI host adapter (the card inside your computer
  305. that "speaks" the SCSI protocol, also called SCSI controller),
  306. because you will be asked for it.
  307. You also need to say Y here if you have a device which speaks
  308. the SCSI protocol. Examples of this include the parallel port
  309. version of the IOMEGA ZIP drive, USB storage devices, Fibre
  310. Channel, FireWire storage and the IDE-SCSI emulation driver.
  311. config ADK_KPACKAGE_KMOD_BLK_DEV_SD
  312. prompt "SCSI disk support"
  313. select ADK_KPACKAGE_KMOD_SCSI if !ADK_KERNEL_SCSI
  314. depends on !ADK_KERNEL_BLK_DEV_SD
  315. tristate
  316. help
  317. If you want to use SCSI hard disks, Fibre Channel disks,
  318. USB storage or the SCSI or parallel port version of
  319. the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
  320. the Disk-HOWTO and the Multi-Disk-HOWTO, available from
  321. <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
  322. CD-ROMs.
  323. config ADK_KPACKAGE_KMOD_BLK_DEV_SR
  324. prompt "SCSI CDROM support"
  325. depends on !ADK_KERNEL_SCSI
  326. depends on !ADK_KERNEL_BLK_DEV_SR
  327. depends on ADK_KPACKAGE_KMOD_SCSI
  328. tristate
  329. help
  330. If you want to use a SCSI or FireWire CD-ROM under Linux,
  331. say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
  332. <http://www.tldp.org/docs.html#howto>. Also make sure to say
  333. Y or M to "ISO 9660 CD-ROM file system support" later.
  334. config ADK_KERNEL_BLK_DEV_MD
  335. boolean
  336. select ADK_KERNEL_MD
  337. default n
  338. config ADK_KPACKAGE_KMOD_BLK_DEV_MD
  339. prompt "RAID support"
  340. tristate
  341. depends on !ADK_KERNEL_BLK_DEV_MD
  342. select ADK_KERNEL_MD
  343. help
  344. config ADK_KERNEL_MD_RAID0
  345. boolean
  346. depends on ADK_KERNEL_BLK_DEV_MD
  347. help
  348. config ADK_KPACKAGE_KMOD_MD_RAID0
  349. prompt "RAID0 support"
  350. tristate
  351. depends on ADK_KPACKAGE_KMOD_BLK_DEV_MD
  352. depends on !ADK_KERNEL_MD_RAID0
  353. help
  354. config ADK_KERNEL_MD_RAID1
  355. boolean
  356. depends on ADK_KERNEL_BLK_DEV_MD
  357. help
  358. config ADK_KPACKAGE_KMOD_MD_RAID1
  359. prompt "RAID1 support"
  360. tristate
  361. depends on ADK_KPACKAGE_KMOD_BLK_DEV_MD
  362. help
  363. config ADK_KPACKAGE_KMOD_MD_RAID456
  364. prompt "RAID456 support"
  365. tristate
  366. depends on ADK_KPACKAGE_KMOD_BLK_DEV_MD
  367. help
  368. config ADK_KPACKAGE_KMOD_BLK_DEV_DM
  369. prompt "Device Mapper support"
  370. select ADK_KERNEL_MD
  371. depends on !ADK_KERNEL_BLK_DEV_DM
  372. tristate
  373. help
  374. Device-mapper is a low level volume manager. It works by allowing
  375. people to specify mappings for ranges of logical sectors. Various
  376. mapping types are available, in addition people may write their own
  377. modules containing custom mappings if they wish.
  378. Higher level volume managers such as LVM2 use this driver.
  379. config ADK_KPACKAGE_KMOD_DM_CRYPT
  380. prompt "Crypt target support"
  381. depends on !ADK_KERNEL_DM_CRYPT
  382. depends on ADK_KPACKAGE_KMOD_BLK_DEV_DM
  383. select ADK_KERNEL_MD
  384. select ADK_KERNEL_CRYPTO
  385. select ADK_KPACKAGE_KMOD_CRYPTO_CBC
  386. select ADK_KPACKAGE_KMOD_CRYPTO_BLKCIPHER
  387. tristate
  388. help
  389. This device-mapper target allows you to create a device that
  390. transparently encrypts the data on it. You'll need to activate
  391. the ciphers you're going to use in the cryptoapi configuration.
  392. Information on how to use dm-crypt can be found on
  393. <http://www.saout.de/misc/dm-crypt/>
  394. config ADK_KPACKAGE_KMOD_DM_SNAPSHOT
  395. prompt "Devicemapper Snapshot target"
  396. depends on ADK_KPACKAGE_KMOD_BLK_DEV_DM
  397. tristate
  398. help
  399. Allow volume managers to take writable snapshots of a device.
  400. config ADK_KPACKAGE_KMOD_DM_MIRROR
  401. prompt "Devicemapper Mirror target"
  402. depends on ADK_KPACKAGE_KMOD_BLK_DEV_DM
  403. tristate
  404. help
  405. Allow volume managers to mirror logical volumes, also
  406. needed for live data migration tools such as 'pvmove'.
  407. config ADK_KPACKAGE_KMOD_BLK_DEV_DRBD
  408. prompt "DRBD support (Network RAID 1)"
  409. tristate
  410. select ADK_KERNEL_BLK_DEV
  411. select ADK_KERNEL_CONNECTOR
  412. help
  413. DRBD - http://www.drbd.org
  414. config ADK_KERNEL_SWAP
  415. prompt "SWAP support"
  416. boolean
  417. help
  418. Kernel swap support.
  419. endmenu