| 1234567891011121314151617181920212223242526272829303132333435363738394041424344 |
- diff -Nur linux-4.9.20.orig/arch/h8300/Kconfig.cpu linux-4.9.20/arch/h8300/Kconfig.cpu
- --- linux-4.9.20.orig/arch/h8300/Kconfig.cpu 2017-03-31 10:32:02.000000000 +0200
- +++ linux-4.9.20/arch/h8300/Kconfig.cpu 2017-04-04 08:10:00.132205323 +0200
- @@ -96,4 +96,8 @@
- hex "Load offset"
- default 0
-
- +config RAMBASE
- + hex "RAM base address"
- + default 0x400000
- +
- endmenu
- diff -Nur linux-4.9.60.orig/arch/h8300/boot/dts/h8300h_sim.dts linux-4.9.60/arch/h8300/boot/dts/h8300h_sim.dts
- --- linux-4.9.60.orig/arch/h8300/boot/dts/h8300h_sim.dts 2017-11-02 09:49:15.000000000 +0100
- +++ linux-4.9.60/arch/h8300/boot/dts/h8300h_sim.dts 2017-12-24 11:30:55.121463793 +0100
- @@ -37,7 +37,7 @@
-
- memory@400000 {
- device_type = "memory";
- - reg = <0x400000 0x400000>;
- + reg = <0x400000 0x800000>;
- };
-
- cpus {
- diff -Nur linux-4.9.60.orig/drivers/tty/serial/sh-sci.c linux-4.9.60/drivers/tty/serial/sh-sci.c
- --- linux-4.9.60.orig/drivers/tty/serial/sh-sci.c 2017-11-02 09:49:15.000000000 +0100
- +++ linux-4.9.60/drivers/tty/serial/sh-sci.c 2017-12-24 11:30:55.121463793 +0100
- @@ -986,8 +986,6 @@
- /* overrun error */
- if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
- copied++;
- -
- - dev_notice(port->dev, "overrun error\n");
- }
-
- if (status & SCxSR_FER(port)) {
- @@ -1060,7 +1058,6 @@
- tty_insert_flip_char(tport, 0, TTY_OVERRUN);
- tty_flip_buffer_push(tport);
-
- - dev_dbg(port->dev, "overrun error\n");
- copied++;
- }
-
|
