Config.in.block 19 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717
  1. # This file is part of the OpenADK project. OpenADK is copyrighted
  2. # material, please see the LICENCE file in the top-level directory.
  3. config ADK_KERNEL_BLOCK
  4. bool
  5. select ADK_KERNEL_AIO
  6. select ADK_KERNEL_INOTIFY_USER
  7. config ADK_KERNEL_AIO
  8. bool
  9. menu "Block devices support"
  10. depends on ADK_TARGET_WITH_BLOCK \
  11. || ADK_TARGET_GENERIC
  12. config ADK_KERNEL_IOSCHED_DEADLINE
  13. bool
  14. config ADK_KERNEL_IOSCHED_CFQ
  15. bool
  16. config ADK_KERNEL_IOSCHED_NOOP
  17. bool
  18. choice
  19. prompt "I/O scheduler"
  20. config ADK_KERNEL_DEFAULT_DEADLINE
  21. bool "deadline"
  22. select ADK_KERNEL_IOSCHED_DEADLINE
  23. config ADK_KERNEL_DEFAULT_CFQ
  24. bool "cfq"
  25. select ADK_KERNEL_IOSCHED_CFQ
  26. config ADK_KERNEL_DEFAULT_NOOP
  27. bool "noop"
  28. select ADK_KERNEL_IOSCHED_NOOP
  29. endchoice
  30. config ADK_KERNEL_IDE
  31. bool
  32. config ADK_KERNEL_IDE_GD
  33. bool
  34. config ADK_KERNEL_IDE_GD_ATA
  35. bool
  36. config ADK_KERNEL_LBDAF
  37. bool
  38. config ADK_KERNEL_BLK_DEV_BSG
  39. bool
  40. config ADK_KERNEL_BLK_DEV_BSGLIB
  41. bool
  42. config ADK_KERNEL_BLK_DEV_THROTTLING
  43. bool
  44. config ADK_KERNEL_MD
  45. bool
  46. config ADK_KERNEL_RAID6_PQ
  47. tristate
  48. config ADK_KERNEL_BLK_DEV_IO_TRACE
  49. bool
  50. config ADK_KERNEL_IOSCHED_AS
  51. bool
  52. config ADK_KERNEL_IOSCHED_DEADLINE
  53. bool
  54. config ADK_KERNEL_IOSCHED_CFQ
  55. bool
  56. config ADK_KERNEL_SCSI_LOWLEVEL
  57. bool
  58. config ADK_KERNEL_SCSI_DMA
  59. bool
  60. config ADK_KERNEL_SCSI_MULTI_LUN
  61. bool
  62. config ADK_KERNEL_SCSI_CONSTANTS
  63. bool
  64. config ADK_KERNEL_SCSI_LOGGING
  65. bool
  66. config ADK_KERNEL_SCSI_SCAN_ASYNC
  67. bool
  68. config ADK_KERNEL_ISCSI_TCP
  69. bool
  70. config ADK_KERNEL_BLK_DEV
  71. bool
  72. config ADK_KERNEL_ATA
  73. bool
  74. config ADK_KERNEL_ATA_SFF
  75. bool
  76. config ADK_KERNEL_ATA_BMDMA
  77. bool
  78. config ADK_KERNEL_SATA_AHCI_PLATFORM
  79. bool
  80. config ADK_KERNEL_SATA_PMP
  81. bool
  82. config ADK_KERNEL_AHCI_IMX
  83. bool
  84. config ADK_KERNEL_CONNECTOR
  85. bool
  86. config ADK_KERNEL_MMC
  87. bool
  88. config ADK_KERNEL_MMC_BLOCK
  89. bool
  90. config ADK_KERNEL_MMC_BLOCK_BOUNCE
  91. bool
  92. config ADK_KERNEL_MMC_UNSAFE_RESUME
  93. bool
  94. config ADK_KERNEL_MMC_SDHCI
  95. bool
  96. config ADK_KERNEL_MMC_SDHCI_IO_ACCESSORS
  97. bool
  98. config ADK_KERNEL_MMC_SDHCI_PLTFM
  99. bool
  100. config ADK_KERNEL_MMC_BCM2835_DMA
  101. bool
  102. config ADK_KERNEL_MMC_BCM2835_SDHOST
  103. bool
  104. config ADK_KERNEL_PWRSEQ_EMMC
  105. bool
  106. config ADK_KERNEL_PWRSEQ_SIMPLE
  107. bool
  108. config ADK_KERNEL_BOARD_GRASSHOPPER_MMC
  109. bool
  110. config ADK_KERNEL_BOARD_GRASSHOPPER_MMCLED
  111. bool
  112. menu "SATA/PATA devices support"
  113. depends on ADK_TARGET_WITH_PATA \
  114. || ADK_TARGET_WITH_SATA \
  115. || ADK_TARGET_QEMU \
  116. || ADK_TARGET_VBOX \
  117. || ADK_TARGET_GENERIC
  118. config ADK_KERNEL_PATA_RB532
  119. tristate "CF disk driver for Mikrotik RB532"
  120. select ADK_KERNEL_BLOCK
  121. select ADK_KERNEL_LBDAF
  122. select ADK_KERNEL_SCSI
  123. select ADK_KERNEL_ATA
  124. select ADK_KERNEL_ATA_SFF
  125. select ADK_KERNEL_ATA_BMDMA
  126. select ADK_KERNEL_BLK_DEV
  127. select ADK_KERNEL_BLK_DEV_SD
  128. depends on ADK_TARGET_SYSTEM_MIKROTIK_RB532
  129. default y if ADK_TARGET_SYSTEM_MIKROTIK_RB532
  130. default n
  131. config ADK_KERNEL_PATA_AMD
  132. tristate "AMD PATA driver"
  133. select ADK_KERNEL_BLOCK
  134. select ADK_KERNEL_LBDAF
  135. select ADK_KERNEL_SCSI
  136. select ADK_KERNEL_ATA
  137. select ADK_KERNEL_ATA_SFF
  138. select ADK_KERNEL_ATA_BMDMA
  139. select ADK_KERNEL_BLK_DEV
  140. select ADK_KERNEL_BLK_DEV_SD
  141. depends on ADK_TARGET_SYSTEM_PCENGINES_ALIX \
  142. || ADK_TARGET_SYSTEM_LEMOTE_YEELONG \
  143. || ADK_TARGET_GENERIC
  144. default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX
  145. default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
  146. default n
  147. config ADK_KERNEL_PATA_SC1200
  148. tristate
  149. select ADK_KERNEL_BLOCK
  150. select ADK_KERNEL_LBDAF
  151. select ADK_KERNEL_SCSI
  152. select ADK_KERNEL_ATA
  153. select ADK_KERNEL_ATA_SFF
  154. select ADK_KERNEL_ATA_BMDMA
  155. select ADK_KERNEL_BLK_DEV
  156. select ADK_KERNEL_BLK_DEV_SD
  157. depends on ADK_TARGET_SYSTEM_PCENGINES_WRAP
  158. default y if ADK_TARGET_SYSTEM_PCENGINES_WRAP
  159. default n
  160. config ADK_KERNEL_SATA_AHCI
  161. tristate "AHCI SATA driver"
  162. select ADK_KERNEL_BLOCK
  163. select ADK_KERNEL_LBDAF
  164. select ADK_KERNEL_SCSI
  165. select ADK_KERNEL_ATA
  166. select ADK_KERNEL_BLK_DEV
  167. select ADK_KERNEL_BLK_DEV_SD
  168. depends on ADK_TARGET_SYSTEM_ASUS_P5BVM || \
  169. ADK_TARGET_SYSTEM_PCENGINES_APU || \
  170. ADK_TARGET_GENERIC || \
  171. ADK_TARGET_VBOX
  172. default y if ADK_TARGET_SYSTEM_PCENGINES_APU
  173. default y if ADK_TARGET_SYSTEM_ASUS_P5BVM
  174. default y if ADK_TARGET_VBOX
  175. default n
  176. help
  177. Enables support for AHCI Serial ATA.
  178. config ADK_KERNEL_ATA_PIIX
  179. tristate "ATA PIIX support"
  180. select ADK_KERNEL_BLOCK
  181. select ADK_KERNEL_LBDAF
  182. select ADK_KERNEL_SCSI
  183. select ADK_KERNEL_SCSI_DMA
  184. select ADK_KERNEL_ATA
  185. select ADK_KERNEL_ATA_SFF
  186. select ADK_KERNEL_ATA_BMDMA
  187. select ADK_KERNEL_BLK_DEV
  188. select ADK_KERNEL_BLK_DEV_SD
  189. depends on ADK_TARGET_SYSTEM_IBM_X40 || \
  190. ADK_TARGET_GENERIC || \
  191. ADK_TARGET_SYSTEM_QEMU_MIPS || \
  192. ADK_TARGET_SYSTEM_QEMU_MIPS64 || \
  193. ADK_TARGET_SYSTEM_QEMU_X86 || \
  194. ADK_TARGET_SYSTEM_QEMU_X86_64 || \
  195. ADK_TARGET_SYSTEM_ASUS_P5BVM
  196. default y if ADK_TARGET_SYSTEM_IBM_X40
  197. default y if ADK_TARGET_SYSTEM_ASUS_P5BVM
  198. default n
  199. help
  200. ATA PIIX driver.
  201. config ADK_KERNEL_PATA_MACIO
  202. tristate "MAC IO support"
  203. select ADK_KERNEL_BLOCK
  204. select ADK_KERNEL_LBDAF
  205. select ADK_KERNEL_SCSI
  206. select ADK_KERNEL_ATA
  207. select ADK_KERNEL_ATA_SFF
  208. select ADK_KERNEL_ATA_BMDMA
  209. select ADK_KERNEL_BLK_DEV
  210. select ADK_KERNEL_BLK_DEV_SD
  211. depends on ADK_TARGET_SYSTEM_QEMU_PPC_MACPPC
  212. config ADK_KERNEL_PATA_PLATFORM
  213. tristate "PATA platform driver"
  214. select ADK_KERNEL_BLOCK
  215. select ADK_KERNEL_LBDAF
  216. select ADK_KERNEL_SCSI
  217. select ADK_KERNEL_ATA
  218. select ADK_KERNEL_ATA_SFF
  219. select ADK_KERNEL_ATA_BMDMA
  220. select ADK_KERNEL_BLK_DEV
  221. select ADK_KERNEL_BLK_DEV_SD
  222. depends on ADK_TARGET_SYSTEM_QEMU_SH
  223. default n
  224. config ADK_KERNEL_PATA_PCMCIA
  225. tristate
  226. select ADK_KERNEL_PCCARD
  227. select ADK_KERNEL_PCMCIA
  228. config ADK_KERNEL_PATA_IMX
  229. tristate "eSATA driver for IMX6 boards"
  230. select ADK_KERNEL_BLOCK
  231. select ADK_KERNEL_LBDAF
  232. select ADK_KERNEL_SCSI
  233. select ADK_KERNEL_ATA
  234. select ADK_KERNEL_ATA_SFF
  235. select ADK_KERNEL_ATA_BMDMA
  236. select ADK_KERNEL_BLK_DEV
  237. select ADK_KERNEL_BLK_DEV_SD
  238. select ADK_KERNEL_ATA
  239. select ADK_KERNEL_AHCI_IMX
  240. select ADK_KERNEL_SATA_PMP
  241. select ADK_KERNEL_SATA_AHCI_PLATFORM
  242. depends on ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
  243. default y if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
  244. default n
  245. help
  246. eSATA driver for IMX6 boards.
  247. config ADK_KERNEL_PATA_CMD64X
  248. tristate "CMD64x PATA driver"
  249. select ADK_KERNEL_BLOCK
  250. select ADK_KERNEL_LBDAF
  251. select ADK_KERNEL_SCSI
  252. select ADK_KERNEL_ATA
  253. select ADK_KERNEL_ATA_SFF
  254. select ADK_KERNEL_ATA_BMDMA
  255. select ADK_KERNEL_BLK_DEV
  256. select ADK_KERNEL_BLK_DEV_SD
  257. depends on ADK_TARGET_SYSTEM_QEMU_SPARC64
  258. help
  259. Driver for CMD64x chipsets.
  260. config ADK_KERNEL_PATA_PXA
  261. tristate "PATA driver for Sharp Zaurus"
  262. select ADK_KERNEL_BLOCK
  263. select ADK_KERNEL_LBDAF
  264. select ADK_KERNEL_SCSI
  265. select ADK_KERNEL_ATA
  266. select ADK_KERNEL_ATA_SFF
  267. select ADK_KERNEL_ATA_BMDMA
  268. select ADK_KERNEL_BLK_DEV
  269. select ADK_KERNEL_BLK_DEV_SD
  270. select ADK_KERNEL_PATA_PCMCIA
  271. select ADK_KERNEL_PCMCIA_PXA2XX
  272. depends on ADK_TARGET_SYSTEM_SHARP_ZAURUS \
  273. || ADK_TARGET_SYSTEM_QEMU_ARM_TERRIER \
  274. || ADK_TARGET_SYSTEM_QEMU_ARM_SPITZ
  275. default y if ADK_TARGET_SYSTEM_SHARP_ZAURUS
  276. default n
  277. help
  278. Driver for PATA on Sharp Zaurus
  279. endmenu
  280. menu "IDE driver support"
  281. depends on ADK_TARGET_SYSTEM_QEMU_ALPHA
  282. config ADK_KERNEL_BLK_DEV_CMD64X
  283. tristate "CMD64x support"
  284. select ADK_KERNEL_BLOCK
  285. select ADK_KERNEL_IDE
  286. select ADK_KERNEL_IDE_GD
  287. select ADK_KERNEL_IDE_GD_ATA
  288. depends on ADK_TARGET_SYSTEM_QEMU_ALPHA
  289. help
  290. CMD64x IDE driver.
  291. endmenu
  292. menu "SCSI driver support"
  293. depends on ADK_TARGET_WITH_SCSI || \
  294. ADK_TARGET_SYSTEM_QEMU_ARM_VERSATILEPB || \
  295. ADK_TARGET_SYSTEM_QEMU_M68K_Q800 || \
  296. ADK_TARGET_SYSTEM_QEMU_PPC64 || \
  297. ADK_TARGET_SYSTEM_QEMU_SPARC
  298. config ADK_KERNEL_SCSI_AIC7XXX
  299. tristate "Adaptec AIC-7XXX support"
  300. select ADK_KERNEL_BLOCK
  301. select ADK_KERNEL_LBDAF
  302. select ADK_KERNEL_SCSI
  303. select ADK_KERNEL_SCSI_LOWLEVEL
  304. select ADK_KERNEL_BLK_DEV
  305. select ADK_KERNEL_BLK_DEV_SD
  306. default y if ADK_TARGET_SYSTEM_SGI_O2
  307. depends on ADK_TARGET_SYSTEM_SGI_O2
  308. config ADK_KERNEL_SCSI_SYM53C8XX_2
  309. tristate "Symbios Logic 53C8XX2 support"
  310. select ADK_KERNEL_BLOCK
  311. select ADK_KERNEL_LBDAF
  312. select ADK_KERNEL_SCSI
  313. select ADK_KERNEL_SCSI_LOWLEVEL
  314. select ADK_KERNEL_BLK_DEV
  315. select ADK_KERNEL_BLK_DEV_SD
  316. depends on ADK_TARGET_SYSTEM_QEMU_ARM_VERSATILEPB
  317. config ADK_KERNEL_SCSI_IBMVSCSI
  318. tristate "IBM VSCSI support"
  319. select ADK_KERNEL_BLOCK
  320. select ADK_KERNEL_LBDAF
  321. select ADK_KERNEL_SCSI
  322. select ADK_KERNEL_SCSI_LOWLEVEL
  323. select ADK_KERNEL_BLK_DEV
  324. select ADK_KERNEL_BLK_DEV_SD
  325. depends on ADK_TARGET_SYSTEM_QEMU_PPC64
  326. config ADK_KERNEL_SCSI_MAC_ESP
  327. tristate "MAC ESP support"
  328. select ADK_KERNEL_BLOCK
  329. select ADK_KERNEL_LBDAF
  330. select ADK_KERNEL_SCSI
  331. select ADK_KERNEL_SCSI_LOWLEVEL
  332. select ADK_KERNEL_BLK_DEV
  333. select ADK_KERNEL_BLK_DEV_SD
  334. depends on ADK_TARGET_SYSTEM_QEMU_M68K_Q800
  335. config ADK_KERNEL_SCSI_SUNESP
  336. tristate "SUN ESP support"
  337. select ADK_KERNEL_BLOCK
  338. select ADK_KERNEL_LBDAF
  339. select ADK_KERNEL_SCSI
  340. select ADK_KERNEL_SCSI_LOWLEVEL
  341. select ADK_KERNEL_SBUS
  342. select ADK_KERNEL_BLK_DEV
  343. select ADK_KERNEL_BLK_DEV_SD
  344. depends on ADK_TARGET_SYSTEM_QEMU_SPARC
  345. endmenu
  346. menu "SD/MMC driver support"
  347. depends on ADK_TARGET_WITH_SD || ADK_TARGET_QEMU
  348. config ADK_KERNEL_MMC_ARMMMCI
  349. bool "SD card support for Qemu ARM Vexpress A9"
  350. select ADK_KERNEL_BLOCK
  351. select ADK_KERNEL_LBDAF
  352. select ADK_KERNEL_SCSI
  353. select ADK_KERNEL_MMC
  354. select ADK_KERNEL_MMC_BLOCK
  355. select ADK_KERNEL_BLK_DEV
  356. select ADK_KERNEL_BLK_DEV_SD
  357. depends on ADK_TARGET_SYSTEM_QEMU_ARM_VEXPRESS_A9
  358. default n
  359. config ADK_KERNEL_MMC_AT91
  360. tristate
  361. select ADK_KERNEL_BLOCK
  362. select ADK_KERNEL_LBDAF
  363. select ADK_KERNEL_SCSI
  364. select ADK_KERNEL_MMC
  365. select ADK_KERNEL_MMC_BLOCK
  366. select ADK_KERNEL_BLK_DEV
  367. select ADK_KERNEL_BLK_DEV_SD
  368. depends on ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
  369. default y if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
  370. default n
  371. config ADK_KERNEL_MMC_BCM2835
  372. bool "SD card support for BCM28XX boards"
  373. select ADK_KERNEL_BLOCK
  374. select ADK_KERNEL_LBDAF
  375. select ADK_KERNEL_SCSI
  376. select ADK_KERNEL_MMC
  377. select ADK_KERNEL_MMC_BLOCK
  378. select ADK_KERNEL_MMC_BLOCK_BOUNCE
  379. select ADK_KERNEL_BLK_DEV
  380. select ADK_KERNEL_BLK_DEV_SD
  381. select ADK_KERNEL_BLK_DEV_BSG
  382. select ADK_KERNEL_BLK_DEV_BSGLIB
  383. select ADK_KERNEL_BLK_DEV_THROTTLING
  384. select ADK_KERNEL_MMC_SDHCI
  385. select ADK_KERNEL_MMC_SDHCI_PLTFM
  386. select ADK_KERNEL_MMC_BCM2835_DMA
  387. select ADK_KERNEL_MMC_BCM2835_SDHOST
  388. depends on ADK_TARGET_BOARD_BCM28XX
  389. default y if ADK_TARGET_BOARD_BCM28XX
  390. default n
  391. config ADK_KERNEL_MMC_SDHCI_ESDHC_IMX
  392. bool "SD card support for IMX6 boards"
  393. select ADK_KERNEL_BLOCK
  394. select ADK_KERNEL_LBDAF
  395. select ADK_KERNEL_SCSI
  396. select ADK_KERNEL_SCSI_DMA
  397. select ADK_KERNEL_SCSI_MULTI_LUN
  398. select ADK_KERNEL_SCSI_CONSTANTS
  399. select ADK_KERNEL_SCSI_LOGGING
  400. select ADK_KERNEL_SCSI_SCAN_ASYNC
  401. select ADK_KERNEL_MMC
  402. select ADK_KERNEL_MMC_BLOCK
  403. select ADK_KERNEL_MMC_BLOCK_BOUNCE
  404. select ADK_KERNEL_BLK_DEV
  405. select ADK_KERNEL_BLK_DEV_SD
  406. select ADK_KERNEL_BLK_DEV_BSG
  407. select ADK_KERNEL_BLK_DEV_BSGLIB
  408. select ADK_KERNEL_MMC_SDHCI
  409. select ADK_KERNEL_MMC_SDHCI_IO_ACCESSORS
  410. select ADK_KERNEL_MMC_SDHCI_PLTFM
  411. select ADK_KERNEL_MMC_UNSAFE_RESUME
  412. select ADK_KERNEL_PWRSEQ_EMMC
  413. select ADK_KERNEL_PWRSEQ_SIMPLE
  414. depends on ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
  415. default y if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
  416. default n
  417. config ADK_KERNEL_MMC_SUNXI
  418. bool "SD card support for SUNXI boards"
  419. select ADK_KERNEL_REGULATOR_FIXED_VOLTAGE
  420. select ADK_KERNEL_REGULATOR_GPIO
  421. select ADK_KERNEL_SCSI
  422. select ADK_KERNEL_SCSI_DMA
  423. select ADK_KERNEL_SCSI_MULTI_LUN
  424. select ADK_KERNEL_SCSI_CONSTANTS
  425. select ADK_KERNEL_SCSI_LOGGING
  426. select ADK_KERNEL_SCSI_SCAN_ASYNC
  427. select ADK_KERNEL_MMC
  428. select ADK_KERNEL_MMC_BLOCK
  429. select ADK_KERNEL_MMC_BLOCK_BOUNCE
  430. select ADK_KERNEL_BLK_DEV
  431. select ADK_KERNEL_BLK_DEV_SD
  432. select ADK_KERNEL_BLK_DEV_BSG
  433. select ADK_KERNEL_BLK_DEV_BSGLIB
  434. select ADK_KERNEL_MMC_SDHCI
  435. select ADK_KERNEL_MMC_SDHCI_IO_ACCESSORS
  436. select ADK_KERNEL_MMC_SDHCI_PLTFM
  437. select ADK_KERNEL_MMC_UNSAFE_RESUME
  438. select ADK_KERNEL_LBDAF
  439. depends on ADK_TARGET_SYSTEM_BANANA_PRO || \
  440. ADK_TARGET_SYSTEM_ORANGE_PI0
  441. default y if ADK_TARGET_SYSTEM_BANANA_PRO
  442. default y if ADK_TARGET_SYSTEM_ORANGE_PI0
  443. default n
  444. config ADK_KERNEL_MMC_ATMELMCI
  445. bool "Atmel SD/MMC Driver (Multimedia Card Interface)"
  446. select ADK_KERNEL_BLK_DEV
  447. select ADK_KERNEL_MMC
  448. select ADK_KERNEL_MMC_BLOCK
  449. select ADK_KERNEL_MMC_BLOCK_BOUNCE
  450. select ADK_KERNEL_MMC_SDHCI
  451. select ADK_KERNEL_MMC_SDHCI_IO_ACCESSORS
  452. select ADK_KERNEL_MMC_SDHCI_PLTFM
  453. select ADK_KERNEL_BOARD_GRASSHOPPER_MMC if ADK_TARGET_SYSTEM_GRASSHOPPER
  454. select ADK_KERNEL_BOARD_GRASSHOPPER_MMCLED if ADK_TARGET_SYSTEM_GRASSHOPPER
  455. depends on ADK_TARGET_SYSTEM_GRASSHOPPER \
  456. || ADK_TARGET_SYSTEM_ATMEL_NGW100
  457. default y if ADK_TARGET_SYSTEM_GRASSHOPPER
  458. default y if ADK_TARGET_SYSTEM_ATMEL_NGW100
  459. default n
  460. help
  461. Atmel Multimedia Card Interface driver for AT32
  462. and AT91 plattforms.
  463. endmenu
  464. menu "Block driver support"
  465. config ADK_KERNEL_SCSI
  466. tristate "SCSI support"
  467. select ADK_KERNEL_IOSCHED_AS
  468. help
  469. If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
  470. any other SCSI device under Linux, say Y and make sure that you know
  471. the name of your SCSI host adapter (the card inside your computer
  472. that "speaks" the SCSI protocol, also called SCSI controller),
  473. because you will be asked for it.
  474. You also need to say Y here if you have a device which speaks
  475. the SCSI protocol. Examples of this include the parallel port
  476. version of the IOMEGA ZIP drive, USB storage devices, Fibre
  477. Channel, FireWire storage and the IDE-SCSI emulation driver.
  478. config ADK_KERNEL_BLK_DEV_SD
  479. tristate "SCSI disk support"
  480. select ADK_KERNEL_SCSI
  481. help
  482. If you want to use SCSI hard disks, Fibre Channel disks,
  483. USB storage or the SCSI or parallel port version of
  484. the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
  485. the Disk-HOWTO and the Multi-Disk-HOWTO, available from
  486. <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
  487. CD-ROMs.
  488. config ADK_KERNEL_BLK_DEV_SR
  489. tristate "SCSI CDROM support"
  490. select ADK_KERNEL_SCSI
  491. help
  492. If you want to use a SCSI or FireWire CD-ROM under Linux,
  493. say Y and read the SCSI-HOWTO and the CDROM-HOWTO at
  494. <http://www.tldp.org/docs.html#howto>. Also make sure to say
  495. Y or M to "ISO 9660 CD-ROM file system support" later.
  496. config ADK_KERNEL_BLK_DEV_MD
  497. tristate "RAID support"
  498. select ADK_KERNEL_MD
  499. config ADK_KERNEL_MD_RAID0
  500. tristate "RAID0 support"
  501. depends on ADK_KERNEL_BLK_DEV_MD
  502. config ADK_KERNEL_MD_RAID1
  503. tristate "RAID1 support"
  504. depends on ADK_KERNEL_BLK_DEV_MD
  505. config ADK_KERNEL_MD_RAID456
  506. tristate "RAID456 support"
  507. depends on ADK_KERNEL_BLK_DEV_MD
  508. config ADK_KERNEL_BLK_DEV_DM
  509. tristate "Device Mapper support"
  510. select ADK_KERNEL_MD
  511. help
  512. Device-mapper is a low level volume manager. It works by allowing
  513. people to specify mappings for ranges of logical sectors. Various
  514. mapping types are available, in addition people may write their own
  515. modules containing custom mappings if they wish.
  516. Higher level volume managers such as LVM2 use this driver.
  517. config ADK_KERNEL_DM_CRYPT
  518. tristate "Crypt target support"
  519. select ADK_KERNEL_MD
  520. select ADK_KERNEL_CRYPTO
  521. select ADK_KERNEL_CRYPTO_CBC
  522. select ADK_KERNEL_CRYPTO_BLKCIPHER
  523. depends on ADK_KERNEL_BLK_DEV_DM
  524. default n
  525. help
  526. This device-mapper target allows you to create a device that
  527. transparently encrypts the data on it. You'll need to activate
  528. the ciphers you're going to use in the cryptoapi configuration.
  529. Information on how to use dm-crypt can be found on
  530. <http://www.saout.de/misc/dm-crypt/>
  531. config ADK_KERNEL_DM_SNAPSHOT
  532. tristate "Devicemapper Snapshot target"
  533. depends on ADK_KERNEL_BLK_DEV_DM
  534. help
  535. Allow volume managers to take writable snapshots of a device.
  536. config ADK_KERNEL_DM_MIRROR
  537. tristate "Devicemapper Mirror target"
  538. depends on ADK_KERNEL_BLK_DEV_DM
  539. help
  540. Allow volume managers to mirror logical volumes, also
  541. needed for live data migration tools such as 'pvmove'.
  542. config ADK_KERNEL_BLK_DEV_DRBD
  543. tristate "DRBD support (Network RAID 1)"
  544. select ADK_KERNEL_BLK_DEV
  545. select ADK_KERNEL_CONNECTOR
  546. default n
  547. help
  548. DRBD - http://www.drbd.org
  549. config ADK_KERNEL_BLK_DEV_LOOP
  550. tristate "Loop mount support"
  551. select ADK_KERNEL_BLK_DEV
  552. default n
  553. help
  554. Saying Y here will allow you to use a regular file as a block
  555. device; you can then create a file system on that block device and
  556. mount it just as you would mount other block devices such as hard
  557. drive partitions, CD-ROM drives or floppy drives. The loop devices
  558. are block special device files with major number 7 and typically
  559. called /dev/loop0, /dev/loop1 etc.
  560. This is useful if you want to check an ISO 9660 file system before
  561. burning the CD, or if you want to use floppy images without first
  562. writing them to floppy. Furthermore, some Linux distributions avoid
  563. the need for a dedicated Linux partition by keeping their complete
  564. root file system inside a DOS FAT file using this loop device
  565. driver.
  566. To use the loop device, you need the losetup utility, found in the
  567. util-linux package, see
  568. <ftp://ftp.kernel.org/pub/linux/utils/util-linux/>.
  569. The loop device driver can also be used to "hide" a file system in
  570. a disk partition, floppy, or regular file, either using encryption
  571. (scrambling the data) or steganography (hiding the data in the low
  572. bits of, say, a sound file). This is also safe if the file resides
  573. on a remote file server.
  574. There are several ways of encrypting disks. Some of these require
  575. kernel patches. The vanilla kernel offers the cryptoloop option
  576. and a Device Mapper target (which is superior, as it supports all
  577. file systems). If you want to use the cryptoloop, say Y to both
  578. LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12
  579. or later) version of util-linux. Additionally, be aware that
  580. the cryptoloop is not safe for storing journaled filesystems.
  581. Note that this loop device has nothing to do with the loopback
  582. device used for network connections from the machine to itself.
  583. config ADK_KERNEL_BLK_DEV_NBD
  584. tristate "Network Block Device support"
  585. help
  586. Saying Y here will allow your computer to be a client for network
  587. block devices, i.e. it will be able to use block devices exported by
  588. servers (mount file systems on them etc.). Communication between
  589. client and server works over TCP/IP networking, but to the client
  590. program this is hidden: it looks like a regular local file access to
  591. a block device special file such as /dev/nd0.
  592. Network block devices also allows you to run a block-device in
  593. userland (making server and client physically the same computer,
  594. communicating using the loopback network device).
  595. Read <file:Documentation/nbd.txt> for more information, especially
  596. about where to find the server code, which runs in user space and
  597. does not need special kernel support.
  598. Note that this has nothing to do with the network file systems NFS
  599. or Coda; you can say N here even if you intend to use NFS or Coda.
  600. config ADK_KERNEL_SWAP
  601. bool "SWAP support"
  602. help
  603. Kernel swap support
  604. endmenu
  605. endmenu