openadk/package/base-files/src/etc/network/if-pre-up.d/04-wireless

#!/bin/sh 
#set -x
set -e 

[ "${IFACE%%[0-9]*}" = "wlan" ] || exit 0

[ "$IF_WIRELESS_SSID" ] || exit 1
[ "$IF_WIRELESS_CHANNEL" ] || exit 1
[ "$IF_WIRELESS_HWMODE" ] || IF_WIRELESS_HWMODE=g

wpa=0
wpa1=0
wpa2=0

case "$IF_WIRELESS_SECURITY" in
	none)
		sec=1
		;;
	wep)
		sec=2
		;;
	wpa)
		sec=1
		wpa1=1
		;;
	wpa2)
		sec=1
		wpa2=1
		;;
	wpa+wpa2)
		sec=1
		wpa=1
		;;
	*)
		sec=1
		;;
esac

case "$IF_WIRELESS_MODE" in
	ap)
		[ -x /usr/sbin/hostapd ] || {
			logger -t hostap "No hostapd program found"
			exit 1
		}
		logger -t hostap "Creating hostapd configuration"
		cat /etc/hostapd.conf > /tmp/hostapd.conf
		chmod 600 /tmp/hostapd.conf
		echo "interface=${IFACE}" >> /tmp/hostapd.conf
		echo "ssid=$IF_WIRELESS_SSID" >> /tmp/hostapd.conf
		echo "channel=$IF_WIRELESS_CHANNEL" >> /tmp/hostapd.conf
		echo "hw_mode=$IF_WIRELESS_HWMODE" >> /tmp/hostapd.conf
		echo "auth_algs=$sec" >> /tmp/hostapd.conf
		[ $wpa1 -eq 1 ] && {
			logger -t hostap "using WPA for security"
			echo "wpa=1" >> /tmp/hostapd.conf
			echo "wpa_key_mgmt=WPA-PSK" >> /tmp/hostapd.conf
			echo "wpa_pairwise=TKIP" >> /tmp/hostapd.conf
			echo "wpa_passphrase=$IF_WIRELESS_PASSPHRASE" >> /tmp/hostapd.conf
		}
		[ $wpa2 -eq 1 ] && {
			logger -t hostap "using WPA2 for security"
			echo "wpa=2" >> /tmp/hostapd.conf
			echo "wpa_key_mgmt=WPA-PSK" >> /tmp/hostapd.conf
			echo "rsn_pairwise=CCMP" >> /tmp/hostapd.conf
			echo "wpa_passphrase=$IF_WIRELESS_PASSPHRASE" >> /tmp/hostapd.conf
		}
		[ $wpa -eq 1 ] && {
			logger -t hostap "using WPA and WPA2 for security"
			echo "wpa=3" >> /tmp/hostapd.conf
			echo "wpa_key_mgmt=WPA-PSK" >> /tmp/hostapd.conf
			echo "wpa_pairwise=TKIP" >> /tmp/hostapd.conf
			echo "rsn_pairwise=CCMP" >> /tmp/hostapd.conf
			echo "wpa_passphrase=$IF_WIRELESS_PASSPHRASE" >> /tmp/hostapd.conf
		}
		logger -t hostap "Starting hostapd"
		hostapd -B /tmp/hostapd.conf
		;;
	sta)
		[ -x /usr/sbin/iw ] || {
			logger -t wireless "No iw utility found"
			exit 1
		}
		ip link set up dev ${IFACE}
		iw dev ${IFACE} set channel $IF_WIRELESS_CHANNEL
		iw dev ${IFACE} connect $IF_WIRELESS_SSID
		[ $wpa2 -eq 1 ] && {
			[ -x /usr/sbin/wpa_supplicant ] || {
				logger -t wireless "No wpa_supplicant found"
				exit 1
			}
			touch /tmp/wpa_supplicant.conf
			chmod 600 /tmp/wpa_supplicant.conf
			echo "network={" > /tmp/wpa_supplicant.conf
			echo " ssid=\"$IF_WIRELESS_SSID\"" >> /tmp/wpa_supplicant.conf
		 	echo " psk=\"$IF_WIRELESS_PASSPHRASE\"" >> /tmp/wpa_supplicant.conf
			echo " priority=5" >> /tmp/wpa_supplicant.conf
			echo "}"  >> /tmp/wpa_supplicant.conf
			wpa_supplicant -B -Dnl80211 -i${IFACE} -c/tmp/wpa_supplicant.conf
		}
		;;
	*)
		echo "Unknown operation mode $IF_WIRELESS_MODE given!"
		exit 1
		;;
esac

exit 0