1
0

Config.in.usb 13 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378
  1. # This file is part of the OpenADK project. OpenADK is copyrighted
  2. # material, please see the LICENCE file in the top-level directory.
  3. menu "USB support"
  4. depends on ADK_TARGET_WITH_USB \
  5. || ADK_TARGET_SYSTEM_QEMU_X86_64 \
  6. || ADK_TARGET_SYSTEM_QEMU_X86 \
  7. || ADK_TARGET_GENERIC
  8. config ADK_WALDUX_KERNEL_USB_SUPPORT
  9. bool
  10. config ADK_WALDUX_KERNEL_USB_DEVICE_CLASS
  11. bool
  12. config ADK_WALDUX_KERNEL_USB_ANNOUNCE_NEW_DEVICES
  13. bool
  14. config ADK_WALDUX_KERNEL_USB_EHCI_ROOT_HUB_TT
  15. bool
  16. config ADK_WALDUX_KERNEL_USB_EHCI_TT_NEWSCHED
  17. bool
  18. config ADK_WALDUX_KERNEL_USB_EHCI_MXC
  19. bool
  20. config ADK_WALDUX_KERNEL_USB_GADGET
  21. tristate
  22. config ADK_WALDUX_KERNEL_USB_PHY
  23. bool
  24. config ADK_WALDUX_KERNEL_USB_MXS_PHY
  25. tristate
  26. select ADK_WALDUX_KERNEL_USB_PHY
  27. default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
  28. default n
  29. config ADK_WALDUX_KERNEL_USB_OHCI_HCD_PLATFORM
  30. bool
  31. select ADK_WALDUX_KERNEL_USB_OHCI_HCD
  32. config ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI
  33. bool
  34. config ADK_WALDUX_KERNEL_USB_LIBUSUAL
  35. tristate
  36. config ADK_WALDUX_KERNEL_USB_NET_DRIVERS
  37. bool
  38. config ADK_WALDUX_KERNEL_USB_USBNET
  39. select ADK_WALDUX_KERNEL_USB_NET_DRIVERS
  40. tristate
  41. config ADK_WALDUX_KERNEL_USB
  42. tristate "USB support"
  43. select ADK_WALDUX_KERNEL_NLS
  44. select ADK_WALDUX_KERNEL_USB_SUPPORT
  45. select ADK_WALDUX_KERNEL_USB_ANNOUNCE_NEW_DEVICES
  46. default m if ADK_TARGET_SYSTEM_ASUS_P5BVM
  47. default m if ADK_TARGET_SYSTEM_PCENGINES_APU
  48. default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX
  49. default m if ADK_TARGET_SYSTEM_IBM_X40
  50. default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
  51. default m if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
  52. default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
  53. default y if ADK_TARGET_SYSTEM_KINETIS_K70
  54. default y if ADK_TARGET_SYSTEM_SOLIDRUN_CLEARFOG
  55. default n
  56. help
  57. Universal Serial Bus (USB) is a specification for a serial bus
  58. subsystem which offers higher speeds and more features than the
  59. traditional PC serial port. The bus supplies power to peripherals
  60. and allows for hot swapping. Up to 127 USB peripherals can be
  61. connected to a single USB host in a tree structure.
  62. The USB host is the root of the tree, the peripherals are the
  63. leaves and the inner nodes are special USB devices called hubs.
  64. Most PCs now have USB host ports, used to connect peripherals
  65. such as scanners, keyboards, mice, modems, cameras, disks,
  66. flash memory, network links, and printers to the PC.
  67. Say Y here if your computer has a host-side USB port and you want
  68. to use USB devices. You then need to say Y to at least one of the
  69. Host Controller Driver (HCD) options below. Choose a USB 1.1
  70. controller, such as "UHCI HCD support" or "OHCI HCD support",
  71. and "EHCI HCD (USB 2.0) support" except for older systems that
  72. do not have USB 2.0 support. It doesn't normally hurt to select
  73. them all if you are not certain.
  74. If your system has a device-side USB port, used in the peripheral
  75. side of the USB protocol, see the "USB Gadget" framework instead.
  76. After choosing your HCD, then select drivers for the USB peripherals
  77. you'll be using. You may want to check out the information provided
  78. in <file:Documentation/usb/> and especially the links given in
  79. <file:Documentation/usb/usb-help.txt>.
  80. menu "USB controller support"
  81. config ADK_WALDUX_KERNEL_USB_EHCI_HCD
  82. tristate "Support for USB EHCI 2.0 controllers"
  83. select ADK_WALDUX_KERNEL_USB_MXS_PHY if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
  84. select ADK_WALDUX_KERNEL_USB_EHCI_MXC if ADK_TARGET_SYSTEM_KINETIS_K70
  85. select ADK_WALDUX_KERNEL_USB_DEVICE_CLASS if ADK_TARGET_SYSTEM_KINETIS_K70
  86. depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
  87. depends on !ADK_TARGET_BOARD_BCM28XX
  88. depends on ADK_WALDUX_KERNEL_USB
  89. default m if ADK_TARGET_SYSTEM_ASUS_P5BVM
  90. default m if ADK_TARGET_SYSTEM_PCENGINES_APU
  91. default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX
  92. default m if ADK_TARGET_SYSTEM_IBM_X40
  93. default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
  94. default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
  95. default y if ADK_TARGET_SYSTEM_KINETIS_K70
  96. default y if ADK_TARGET_SYSTEM_SOLIDRUN_CLEARFOG
  97. default n
  98. help
  99. The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
  100. "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
  101. If your USB host controller supports USB 2.0, you will likely want to
  102. configure this Host Controller Driver. At the time of this writing,
  103. the primary implementation of EHCI is a chip from NEC, widely available
  104. in add-on PCI cards, but implementations are in the works from other
  105. vendors including Intel and Philips. Motherboard support is appearing.
  106. EHCI controllers are packaged with "companion" host controllers (OHCI
  107. or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
  108. will connect to EHCI if the device is high speed, otherwise they
  109. connect to a companion controller. If you configure EHCI, you should
  110. probably configure the OHCI (for NEC and some other vendors) USB Host
  111. Controller Driver or UHCI (for Via motherboards) Host Controller
  112. Driver too.
  113. You may want to read <file:Documentation/usb/ehci.txt>.
  114. config ADK_WALDUX_KERNEL_USB_UHCI_HCD
  115. tristate "Support for UHCI controllers"
  116. depends on ADK_WALDUX_KERNEL_USB
  117. depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
  118. depends on !ADK_TARGET_BOARD_BCM28XX
  119. default m if ADK_TARGET_SYSTEM_ASUS_P5BVM
  120. default m if ADK_TARGET_SYSTEM_PCENGINES_APU
  121. default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX
  122. default m if ADK_TARGET_SYSTEM_IBM_X40
  123. default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
  124. default n
  125. help
  126. The Universal Host Controller Interface is a standard by Intel for
  127. accessing the USB hardware in the PC (which is also called the USB
  128. host controller). If your USB host controller conforms to this
  129. standard, you may want to say Y, but see below. All recent boards
  130. with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
  131. i810, i820) conform to this standard. Also all VIA PCI chipsets
  132. (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
  133. 133). If unsure, say Y.
  134. config ADK_WALDUX_KERNEL_USB_OHCI_HCD
  135. tristate "Support for OHCI controllers"
  136. depends on ADK_WALDUX_KERNEL_USB
  137. depends on !ADK_TARGET_BOARD_BCM28XX
  138. select ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI if ADK_TARGET_SYSTEM_PCENGINES_ALIX
  139. select ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI if ADK_TARGET_SYSTEM_PCENGINES_APU
  140. select ADK_WALDUX_KERNEL_USB_OHCI_HCD_PCI if ADK_TARGET_SYSTEM_ASUS_P5BVM
  141. default m if ADK_TARGET_SYSTEM_ASUS_P5BVM
  142. default m if ADK_TARGET_SYSTEM_PCENGINES_APU
  143. default m if ADK_TARGET_SYSTEM_PCENGINES_ALIX
  144. default m if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
  145. default m if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
  146. default n
  147. help
  148. The Open Host Controller Interface (OHCI) is a standard for accessing
  149. USB 1.1 host controller hardware. It does more in hardware than Intel's
  150. UHCI specification. If your USB host controller follows the OHCI spec,
  151. say Y. On most non-x86 systems, and on x86 hardware that's not using a
  152. USB controller from Intel or VIA, this is appropriate. If your host
  153. controller doesn't use PCI, this is probably appropriate. For a PCI
  154. based system where you're not sure, the "lspci -v" entry will list the
  155. right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
  156. config ADK_WALDUX_KERNEL_USB_DWCOTG
  157. bool "Support for DWCOTG controller"
  158. select ADK_WALDUX_KERNEL_USB
  159. select ADK_WALDUX_KERNEL_FIQ
  160. depends on ADK_TARGET_BOARD_BCM28XX
  161. default y if ADK_TARGET_BOARD_BCM28XX
  162. default n
  163. help
  164. The Synopsis DWC controller is a dual-role
  165. host/peripheral/OTG ("On The Go") USB controllers.
  166. config ADK_WALDUX_KERNEL_USB_CHIPIDEA_UDC
  167. bool
  168. config ADK_WALDUX_KERNEL_USB_CHIPIDEA_HOST
  169. bool
  170. config ADK_WALDUX_KERNEL_USB_CHIPIDEA
  171. tristate "Support for ChipIdea controller"
  172. select ADK_WALDUX_KERNEL_USB_CHIPIDEA_UDC
  173. select ADK_WALDUX_KERNEL_USB_CHIPIDEA_HOST
  174. select ADK_WALDUX_KERNEL_USB_GADGET
  175. depends on ADK_WALDUX_KERNEL_USB_EHCI_HCD
  176. depends on ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
  177. default m if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6
  178. default n
  179. config ADK_WALDUX_KERNEL_USB_ISP116X_HCD
  180. tristate "Support for ISP116X"
  181. depends on ADK_WALDUX_KERNEL_USB
  182. depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
  183. depends on !ADK_TARGET_BOARD_BCM28XX
  184. help
  185. The ISP1160 and ISP1161 chips are USB host controllers. Enable this
  186. option if your board has this chip. If unsure, say N.
  187. This driver does not support isochronous transfers.
  188. config ADK_WALDUX_KERNEL_USB_SL811_HCD
  189. tristate "Support for SL811HS"
  190. depends on ADK_WALDUX_KERNEL_USB
  191. depends on !ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
  192. depends on !ADK_TARGET_BOARD_BCM28XX
  193. default n
  194. help
  195. The SL811HS is a single-port USB controller that supports either
  196. host side or peripheral side roles. Enable this option if your
  197. board has this chip, and you want to use it as a host controller.
  198. If unsure, say N.
  199. endmenu
  200. menu "USB devices support"
  201. config ADK_WALDUX_KERNEL_USB_STORAGE
  202. tristate "Support for USB storage devices"
  203. select ADK_WALDUX_KERNEL_SCSI
  204. select ADK_WALDUX_KERNEL_BLK_DEV_SD
  205. config ADK_WALDUX_KERNEL_SND_USB_AUDIO
  206. tristate "Support for USB sound adapter"
  207. select ADK_WALDUX_KERNEL_SND
  208. select ADK_WALDUX_KERNEL_SND_USB
  209. select ADK_WALDUX_KERNEL_SND_RAWMIDI
  210. config ADK_WALDUX_KERNEL_USB_HSO
  211. tristate "Support for USB HSO devices"
  212. select ADK_WALDUX_KERNEL_RFKILL
  213. select ADK_WALDUX_KERNEL_USB_STORAGE
  214. config ADK_WALDUX_KERNEL_USB_PRINTER
  215. tristate "Support for USB printers"
  216. config ADK_WALDUX_KERNEL_USB_ACM
  217. tristate "Support for USB modems/isdn controllers"
  218. config ADK_WALDUX_KERNEL_USB_PEGASUS
  219. tristate "Support for USB Pegasus network cards"
  220. select ADK_WALDUX_KERNEL_USB_NET_DRIVERS
  221. config ADK_WALDUX_KERNEL_USB_SERIAL
  222. tristate "Support for USB-to-serial converters"
  223. help
  224. Say Y here if you have a USB device that provides normal serial
  225. ports, or acts like a serial device, and you want to connect it to
  226. your USB bus.
  227. Please read <file:Documentation/usb/usb-serial.txt> for more
  228. information on the specifics of the different devices that are
  229. supported, and on how to use them.
  230. config ADK_WALDUX_KERNEL_USB_SERIAL_BELKIN
  231. tristate "Support for Belkin USB-to-serial converters"
  232. depends on ADK_WALDUX_KERNEL_USB_SERIAL
  233. help
  234. Say Y here if you want to use a Belkin USB Serial single port
  235. adaptor (F5U103 is one of the model numbers) or the Peracom single
  236. port USB to serial adapter.
  237. config ADK_WALDUX_KERNEL_USB_SERIAL_FTDI_SIO
  238. tristate "Support for FTDI USB-to-serial converter"
  239. depends on ADK_WALDUX_KERNEL_USB_SERIAL
  240. help
  241. Say Y here if you want to use a FTDI SIO single port USB to serial
  242. converter device. The implementation I have is called the USC-1000.
  243. This driver has also be tested with the 245 and 232 devices.
  244. See <http://ftdi-usb-sio.sourceforge.net/> for more
  245. information on this driver and the device.
  246. config ADK_WALDUX_KERNEL_USB_SERIAL_MCT_U232
  247. tristate "Support for Magic Control Technology USB-to-Serial converters"
  248. depends on ADK_WALDUX_KERNEL_USB_SERIAL
  249. help
  250. Say Y here if you want to use a USB Serial single port adapter from
  251. Magic Control Technology Corp. (U232 is one of the model numbers).
  252. This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
  253. BAY, Belkin F5U109, and Belkin F5U409 devices.
  254. config ADK_WALDUX_KERNEL_USB_SERIAL_PL2303
  255. tristate "Support for Prolific PL2303 USB-to-Serial converters"
  256. depends on ADK_WALDUX_KERNEL_USB_SERIAL
  257. help
  258. Say Y here if you want to use the PL2303 USB Serial single port
  259. adapter from Prolific.
  260. config ADK_WALDUX_KERNEL_USB_SERIAL_VISOR
  261. tristate "Support for Handspring Visor / Palm m50x / Sony Clie Driver"
  262. depends on ADK_WALDUX_KERNEL_USB_SERIAL
  263. help
  264. Say Y here if you want to connect to your HandSpring Visor, Palm
  265. m500 or m505 through its USB docking station. See
  266. <http://usbvisor.sourceforge.net/> for more information on using this
  267. driver.
  268. config ADK_WALDUX_KERNEL_USB_SERIAL_SIERRAWIRELESS
  269. tristate "Support for Sierra Wireless USB-to-Serial converters"
  270. depends on ADK_WALDUX_KERNEL_USB_SERIAL
  271. config ADK_WALDUX_KERNEL_USB_SERIAL_OPTION
  272. tristate "USB driver for GSM and CDMA modems"
  273. depends on ADK_WALDUX_KERNEL_USB_SERIAL
  274. help
  275. Say Y here if you have a GSM or CDMA modem that's connected to USB.
  276. config ADK_WALDUX_KERNEL_USB_SERIAL_WWAN
  277. tristate
  278. depends on ADK_WALDUX_KERNEL_USB_SERIAL
  279. config ADK_WALDUX_KERNEL_USB_ATM
  280. tristate "Support for USB ATM devices"
  281. config ADK_WALDUX_KERNEL_USB_ATM_SPEEDTOUCH
  282. tristate "Support for USB Speedtouch ADSL modem"
  283. depends on ADK_WALDUX_KERNEL_USB_ATM
  284. config ADK_WALDUX_KERNEL_USB_SISUSBVGA
  285. tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
  286. config ADK_WALDUX_KERNEL_USB_NET_QMI_WWAN
  287. tristate "Qualcomm LTE modems"
  288. select ADK_WALDUX_KERNEL_USB_USBNET
  289. help
  290. config ADK_WALDUX_KERNEL_USB_SIERRA_NET
  291. tristate "Sierra Wireless MC8775 PCI Express"
  292. select ADK_WALDUX_KERNEL_USB_USBNET
  293. help
  294. Driver for WWAN modem Sierra Wireless MC8775 PCI Express
  295. config ADK_WALDUX_KERNEL_SND_USB
  296. bool
  297. depends on ADK_WALDUX_KERNEL_USB
  298. config ADK_WALDUX_KERNEL_SND_USB_AUDIO
  299. tristate
  300. config ADK_WALDUX_KERNEL_USB_GADGET
  301. tristate
  302. config ADK_WALDUX_KERNEL_USB_AUDIO
  303. tristate
  304. config ADK_WALDUX_KERNEL_USB_MIDI_GADGET
  305. tristate "USB Midi Gadgets"
  306. select ADK_WALDUX_KERNEL_USB_GADGET
  307. select ADK_WALDUX_KERNEL_USB_AUDIO
  308. select ADK_WALDUX_KERNEL_SND_USB_AUDIO
  309. select ADK_WALDUX_KERNEL_SND_USB
  310. help
  311. Enable USB midi devices
  312. endmenu
  313. endmenu