openadk/package/libnet/patches/patch-Makefile_in

--- Libnet-1.0.2a.orig/Makefile.in	2001-02-05 18:51:41.000000000 +0100
+++ Libnet-1.0.2a/Makefile.in	2009-08-23 00:39:58.705644309 +0200
@@ -1,147 +1,638 @@
-#
-#   $Id: Makefile.in,v 1.1.1.1 2000/05/25 00:28:49 route Exp $
-#
-#   Libnet 1.0 makefile
-#   (c) 1998 - 2001  Mike D. Schiffman <mike@infonexus.com>
-#                                
-#   @configure_input@
+# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# @configure_input@
 
-#   Enabled:    Dumps debugging info and verbose error information.
-#   Disabled:   Doesn't.
-#   default:    disabled.
-DEFINES     +=  #-D__DEBUG 
-prefix      =   @prefix@
-exec_prefix =   @exec_prefix@
-srcdir      =   @srcdir@
-BIN_PREFIX  =   @bindir@/
-INC_PREFIX  =   @includedir@/
-LIB_PREFIX  =   @libdir@/
-MAN_PREFIX  =   @MAN_PREFIX@
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
-LIBNET      =   libnet
-LIBPWRITE   =   libpwrite
-LIB         =   lib/$(LIBNET).a
-MAN         =   doc/$(LIBNET).3
-INCLUDE     =   include/$(LIBNET).h
-INCLUDE-H   =   include/$(LIBNET)/$(LIBNET)-headers.h
-INCLUDE-F   =   include/$(LIBNET)/$(LIBNET)-functions.h
-INCLUDE-S   =   include/$(LIBNET)/$(LIBNET)-structures.h
-INCLUDE-M   =   include/$(LIBNET)/$(LIBNET)-macros.h
-INCLUDE-A   =   include/$(LIBNET)/$(LIBNET)-asn1.h
-INCLUDE-O   =   include/$(LIBNET)/$(LIBNET)-ospf.h
-CONFIG      =   $(LIBNET)-config
-DEFINES     +=  @DEFS@
-RANLIB      =   @RANLIB@
-AR          =   @AR@
-LN          =   @LN@
-CC          =   @CC@
-ENSUREDIR   =   $(srcdir)/ensure-dir.sh
-INSTALL_DATA=   $(srcdir)/install-sh
-CFLAGS      =   @CFLAGS@
-CPPFLAGS    =   @CPPFLAGS@
-OBJECTS     =   src/libnet_resolve.o\
-		src/libnet_socket.o\
-		src/libnet_checksum.o\
-		src/libnet_prand.o\
-		src/libnet_version.o\
-		src/libnet_write_ip.o\
-		src/libnet_insert_ipo.o\
-		src/libnet_insert_tcpo.o\
-		src/libnet_error.o\
-		src/libnet_link_@LL_INT_TYPE@.o\
-		src/libnet_packet_mem.o\
-		src/libnet_build_ip.o\
-		src/libnet_build_tcp.o\
-		src/libnet_build_udp.o\
-		src/libnet_build_arp.o\
-		src/libnet_build_ethernet.o\
-		src/libnet_build_icmp.o\
-		src/libnet_build_igmp.o\
-		src/libnet_build_dns.o\
-		src/libnet_build_snmp.o\
-		src/libnet_build_rip.o\
-		src/libnet_build_ospf.o\
-		src/libnet_build_vrrp.o\
-		src/libnet_asn1.o\
-		src/libnet_hex_dump.o\
-		src/libnet_if_addr.o\
-		src/libnet_port_list.o 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
 
-.c.o:
-	$(CC) $(CFLAGS) $(CPPFLAGS) $(DEFINES) -c $< -o $@
+@SET_MAKE@
 
-all: libnet
-supp: test example
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/libnet-config.in \
+	$(top_srcdir)/Makefile.am.common $(top_srcdir)/configure \
+	acconfig.h config.guess config.sub install-sh ltmain.sh \
+	missing mkinstalldirs
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/config.h
+CONFIG_CLEAN_FILES = libnet-config
+am__installdirs = "$(DESTDIR)$(bindir)"
+binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
+SCRIPTS = $(bin_SCRIPTS)
+depcomp =
+am__depfiles_maybe =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+ADDITIONAL_LIBS = @ADDITIONAL_LIBS@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BIN_PREFIX = @BIN_PREFIX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INC_PREFIX = @INC_PREFIX@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBNET_CONFIG_CFLAGS = @LIBNET_CONFIG_CFLAGS@
+LIBNET_CONFIG_DEFINES = @LIBNET_CONFIG_DEFINES@
+LIBNET_CONFIG_LIBS = @LIBNET_CONFIG_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIB_PREFIX = @LIB_PREFIX@
+LIPO = @LIPO@
+LL_INT_TYPE = @LL_INT_TYPE@
+LL_INT_TYPE_UC = @LL_INT_TYPE_UC@
+LN = @LN@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAN_PREFIX = @MAN_PREFIX@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+AUTOMAKE_OPTIONS = foreign no-dependencies
+DISTCLEANFILES = *~
+SUBDIRS = src include
+EXTRA_DIST = Makefile.am.common
+bin_SCRIPTS = libnet-config
+all: all-recursive
 
-libnet: version.h $(OBJECTS)
-	$(AR) -cr $(LIB) $(OBJECTS)
-	$(RANLIB) $(LIB)
+.SUFFIXES:
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/Makefile.am.common $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
+	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
 
-version.o: version.h
-version.h: ./VERSION
-	@rm -f $@
-	sed -e 's/.*/#define VERSION "&"/' ./VERSION > $@
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
 
-test:    libnet
-	cd test; make
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+libnet-config: $(top_builddir)/config.status $(srcdir)/libnet-config.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
+	@list='$(bin_SCRIPTS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f $$d$$p; then \
+	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+	    echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+	    $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
+	  else :; fi; \
+	done
 
-util:    libnet install
-	cd util; make
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
+	done
 
-example: libnet install
-	cd example; make
+mostlyclean-libtool:
+	-rm -f *.lo
 
-install: libnet
-	$(ENSUREDIR) $(DESTDIR)$(prefix) 755
-	$(ENSUREDIR) $(DESTDIR)$(LIB_PREFIX) 755
-	$(ENSUREDIR) $(DESTDIR)$(INC_PREFIX)$(LIBNET) 755
-	$(ENSUREDIR) $(DESTDIR)$(INC_PREFIX) 755
-	$(ENSUREDIR) $(DESTDIR)$(MAN_PREFIX) 755
-	$(ENSUREDIR) $(DESTDIR)$(BIN_PREFIX) 755
-	$(INSTALL_DATA) $(LIB) $(DESTDIR)$(LIB_PREFIX)
-	rm -f $(DESTDIR)$(LIB_PREFIX)$(LIBPWRITE).a
-	cd $(DESTDIR)$(LIB_PREFIX); $(LN) -f -s $(LIBNET).a $(LIBPWRITE).a
-	$(INSTALL_DATA) $(INCLUDE) $(DESTDIR)$(INC_PREFIX)
-	$(INSTALL_DATA) $(INCLUDE-H) $(DESTDIR)$(INC_PREFIX)$(LIBNET)
-	$(INSTALL_DATA) $(INCLUDE-F) $(DESTDIR)$(INC_PREFIX)$(LIBNET)
-	$(INSTALL_DATA) $(INCLUDE-S) $(DESTDIR)$(INC_PREFIX)$(LIBNET)
-	$(INSTALL_DATA) $(INCLUDE-M) $(DESTDIR)$(INC_PREFIX)$(LIBNET)
-	$(INSTALL_DATA) $(INCLUDE-A) $(DESTDIR)$(INC_PREFIX)$(LIBNET)
-	$(INSTALL_DATA) $(INCLUDE-O) $(DESTDIR)$(INC_PREFIX)$(LIBNET)
-	$(INSTALL_DATA) $(MAN) $(DESTDIR)$(MAN_PREFIX)
-	$(INSTALL_DATA) $(CONFIG) $(DESTDIR)$(BIN_PREFIX)
+clean-libtool:
+	-rm -rf .libs _libs
 
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
 
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
 
-clean:
-	if test -f test/Makefile; then \
-	    cd test && make clean; \
-	fi
-	if test -f example/Makefile; then \
-	    cd example && make clean; \
-	fi
-	if test -f util/Makefile; then \
-	    cd util && make clean; \
-	fi
-	if test -f support/bpf-lkm/etherspoof; then \
-	    cd support/bpf-lkm/etherspoof && make clean; \
-	fi
-	rm -f *.core src/*.o $(LIB)
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $$MAKEFLAGS; amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
 
-distclean: clean
-	if test -f test/Makefile; then \
-	    cd test && make distclean; \
-	fi
-	if test -f example/Makefile; then \
-	    cd example && make distclean; \
-	fi
-	if test -f util/Makefile; then \
-	    cd util && make distclean; \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
 	fi
-	if test -f support/bpf-lkm/etherspoof; then \
-	    cd support/bpf-lkm/etherspoof && rm -rf Makefile; \
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	mkdir $(distdir)
+	$(mkdir_p) $(distdir)/.
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || mkdir "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="../$(top_distdir)" \
+	        distdir="../$(distdir)/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
 	fi
-	rm -f config.log config.cache config.status Makefile include/config.h \
-	version.h support/bpf-lkm/etherspoof conftest* libnet-config
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(SCRIPTS)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
 
-# EOF
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-binSCRIPTS
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binSCRIPTS uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
+	check-am clean clean-generic clean-libtool clean-recursive \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+	dist-shar dist-tarZ dist-zip distcheck distclean \
+	distclean-generic distclean-libtool distclean-recursive \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binSCRIPTS install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
+	tags tags-recursive uninstall uninstall-am \
+	uninstall-binSCRIPTS uninstall-info-am
+
+
+version.h: VERSION
+	sed -e 's/.*/#define VERSION "&"/' < $< > $@
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: