Merge branch 'master' of git+ssh://openadk.org/git/openadk

BUGS

@@ -1,3 +1,5 @@
-- arm: thumb mode with glibc does not boot
-- sparc64: ide driver not working, only virtio (but unstable)
-- microblaze big endian: network card emulation fails
+- qemu-sparc: startup kernel with gcc 4.8.2 broken
+- qemu-sh4: usb keyboard is broken
+- qemu-arm: thumb mode with glibc does not boot
+- qemu-sparc64: ide driver not working, only virtio (but unstable)
+- qemu-microblaze: network card emulation fails, little endian works

target/config/Config.in

@@ -241,6 +241,7 @@ config ADK_TARGET_QEMU_WITH_GRAPHIC
 	select ADK_KERNEL_KEYBOARD_ATKBD if ADK_TARGET_SYSTEM_QEMU_I686 || ADK_TARGET_SYSTEM_QEMU_X86_64
 	select ADK_KERNEL_INPUT_MOUSE
 	select ADK_KERNEL_INPUT_MOUSEDEV
+	select ADK_KERNEL_USB_HID if ADK_TARGET_SYSTEM_QEMU_SH4 || ADK_TARGET_SYSTEM_QEMU_SH4EB
 
 endchoice
 
@@ -619,6 +620,7 @@ config ADK_TARGET_CMDLINE
 	default "console=ttyS0,115200 console=tty0" if ADK_TARGET_SYSTEM_IBM_X40
 	default "console=ttyS0,115200 console=tty0" if ADK_TARGET_SYSTEM_INTEL_ATOM
 	default "console=ttyS0,115200 console=tty0" if ADK_TARGET_SYSTEM_QEMU_I686
+	default "console=ttyS0,115200 console=tty0" if ADK_TARGET_SYSTEM_QEMU_X86_64
 	default "console=ttyS0,115200 console=tty0" if ADK_TARGET_SYSTEM_QEMU_SPARC64
 	default "console=ttyS0,9600 console=tty0" if ADK_TARGET_SYSTEM_QEMU_PPC
 	default "console=hvc0 console=tty0" if ADK_TARGET_SYSTEM_QEMU_PPC64

target/config/Config.in.runtime

@@ -38,8 +38,8 @@ config ADK_RUNTIME_TIMEZONE
 
 choice
 prompt "Console output on embedded system"
-default ADK_RUNTIME_CONSOLE_BOTH if ADK_TARGET_WITH_VGA && !ADK_TARGET_SYSTEM_RASPBERRY_PI && !ADK_TARGET_SYSTEM_QEMU_SH4 && !ADK_TARGET_SYSTEM_QEMU_SH4EB && !ADK_TARGET_SYSTEM_LEMOTE_YEELONG && ADK_TARGET_QEMU_WITH_GRAPHIC
-default ADK_RUNTIME_CONSOLE_VGA if ADK_TARGET_SYSTEM_RASPBERRY_PI || ADK_TARGET_SYSTEM_QEMU_SH4 || ADK_TARGET_SYSTEM_QEMU_SH4EB || ADK_TARGET_SYSTEM_LEMOTE_YEELONG
+default ADK_RUNTIME_CONSOLE_BOTH if ADK_TARGET_WITH_VGA || ADK_TARGET_QEMU_WITH_GRAPHIC && !ADK_TARGET_SYSTEM_RASPBERRY_PI && !ADK_TARGET_SYSTEM_LEMOTE_YEELONG
+default ADK_RUNTIME_CONSOLE_VGA if ADK_TARGET_SYSTEM_RASPBERRY_PI || ADK_TARGET_SYSTEM_LEMOTE_YEELONG
 default ADK_RUNTIME_CONSOLE_SERIAL
 
 config ADK_RUNTIME_CONSOLE_VGA

target/linux/config/Config.in.input

@@ -9,6 +9,10 @@ config ADK_KERNEL_INPUT
 	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI
 	default n
 
+config ADK_KERNEL_USB_HID
+	boolean
+	default n
+
 config ADK_KERNEL_HID_LOGITECH
 	boolean
 	default n
@@ -113,6 +117,7 @@ depends on ADK_TARGET_WITH_USB || ADK_TARGET_WITH_INPUT || ADK_TARGET_WITH_TOUCH
 config ADK_KPACKAGE_KMOD_USB_HID
 	prompt "kmod-usb-hid..................... USB keyboard/mouse support"
 	tristate
+	depends on !ADK_KERNEL_USB_HID
 	select ADK_KERNEL_INPUT
 	select ADK_KERNEL_HID
 	select ADK_KERNEL_HID_GENERIC
@@ -122,8 +127,6 @@ config ADK_KPACKAGE_KMOD_USB_HID
 	depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
 	depends on ADK_TARGET_WITH_USB
 	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI
-	default y if ADK_TARGET_SYSTEM_QEMU_SH4 && ADK_TARGET_QEMU_WITH_GRAPHIC
-	default y if ADK_TARGET_SYSTEM_QEMU_SH4EB && ADK_TARGET_QEMU_WITH_GRAPHIC
 	default n
 
 config ADK_KERNEL_LOGITECH_DINOVO

target/linux/config/Config.in.usb

@@ -1,11 +1,23 @@
 menu "USB support"
-depends on ADK_TARGET_WITH_USB
+depends on ADK_TARGET_WITH_USB || ADK_HARDWARE_QEMU
 
 config ADK_KERNEL_USB_SUPPORT
 	boolean
 
 config ADK_KERNEL_USB
 	select ADK_KERNEL_USB_SUPPORT
+	default y if ADK_TARGET_SYSTEM_QEMU_SH4
+	default y if ADK_TARGET_SYSTEM_QEMU_SH4EB
+	boolean
+
+config ADK_KERNEL_USB_OHCI_HCD
+	default y if ADK_TARGET_SYSTEM_QEMU_SH4
+	default y if ADK_TARGET_SYSTEM_QEMU_SH4EB
+	boolean
+
+config ADK_KERNEL_USB_OHCI_HCD_PLATFORM
+	default y if ADK_TARGET_SYSTEM_QEMU_SH4
+	default y if ADK_TARGET_SYSTEM_QEMU_SH4EB
 	boolean
 
 config ADK_KERNEL_USB_LIBUSUAL
@@ -36,7 +48,6 @@ config ADK_KPACKAGE_KMOD_USB
 	select ADK_KERNEL_USB_SUPPORT
 	depends on !ADK_KERNEL_USB
 	default y if ADK_TARGET_SYSTEM_QEMU_I686
-	default y if ADK_TARGET_SYSTEM_QEMU_SH4
 	default y if ADK_TARGET_SYSTEM_QEMU_X86_64
 	default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C
 	default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D2
@@ -108,6 +119,7 @@ config ADK_KPACKAGE_KMOD_USB_OHCI_HCD
 	default y if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20
 	default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG
 	default y if ADK_TARGET_SYSTEM_QEMU_SH4
+	default y if ADK_TARGET_SYSTEM_QEMU_SH4EB
 	default n
 	help
 	  The Open Host Controller Interface (OHCI) is a standard for accessing

target/sh/Makefile

@@ -8,6 +8,7 @@ include $(TOPDIR)/mk/kernel-build.mk
 include $(TOPDIR)/mk/image.mk
 
 KERNEL:=$(LINUX_DIR)/arch/sh/boot/zImage
+QEMU_ARGS:=${ADK_QEMU_ARGS} -monitor null -serial null -serial stdio
 
 ifeq ($(ADK_TARGET_FS),archive)
 imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
@@ -18,7 +19,7 @@ ifneq ($(ADK_HARDWARE_QEMU),)
 	@echo "Use following command to create a QEMU Image:"
 	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following options:"
-	@echo 'qemu-system-${CPU_ARCH} ${ADK_QEMU_ARGS} -M r2d -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-${CPU_ARCH} ${QEMU_ARGS} -M r2d -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
@@ -28,7 +29,7 @@ imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_HARDWARE_QEMU),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-${CPU_ARCH} ${ADK_QEMU_ARGS} -M r2d -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-${CPU_ARCH} ${QEMU_ARGS} -M r2d -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
@@ -37,6 +38,6 @@ imageinstall: createinitramfs
 	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_HARDWARE_QEMU),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-${CPU_ARCH} ${ADK_QEMU_ARGS} -M r2d -kernel $(FW_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-${CPU_ARCH} ${QEMU_ARGS} -M r2d -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif

target/x86/Makefile

@@ -34,7 +34,7 @@ ifeq ($(ADK_HARDWARE_QEMU),y)
 	@echo "Use following command to create a QEMU Image:"
 	@echo "./scripts/create.sh qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-i386 -nographic -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-i386 ${ADK_QEMU_ARGS} -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 ifeq ($(ADK_HARDWARE_VBOX),y)
 	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
@@ -54,7 +54,7 @@ imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_HARDWARE_QEMU),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-i386 -nographic -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-i386 ${ADK_QEMU_ARGS} -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
@@ -63,7 +63,7 @@ imageinstall: createinitramfs
 	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_HARDWARE_QEMU),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-i386 -nographic -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-i386 ${ADK_QEMU_ARGS} -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
 ifeq (${ADK_TARGET_FS},iso)

target/x86_64/Makefile

@@ -17,7 +17,7 @@ ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86_64),y)
 	@echo "Use following command to create a QEMU Image:"
 	@echo "./scripts/create.sh qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-x86_64 -nographic -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-x86_64 ${ADK_QEMU_ARGS} -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),usb)
@@ -32,7 +32,7 @@ imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86_64),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-x86_64 -nographic -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-x86_64 ${ADK_QEMU_ARGS} -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
@@ -41,7 +41,7 @@ imageinstall: createinitramfs
 	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86_64),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-x86_64 -nographic -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-x86_64 ${ADK_QEMU_ARGS} -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),nfsroot)

target/x86_64/sys-available/shuttle-sa76

@@ -1,16 +0,0 @@
-config ADK_TARGET_SYSTEM_SHUTTLE_SA76
-	bool "Shuttle SA76"
-	depends on ADK_BROKEN
-	select ADK_x86_64
-	select ADK_shuttle_sa76
-	select ADK_CPU_AMDFAM10
-	select ADK_LINUX_64
-	select ADK_KERNEL_SMP
-	select ADK_TARGET_WITH_VGA
-	select ADK_TARGET_WITH_SATA
-	select ADK_TARGET_WITH_INPUT
-	select ADK_TARGET_WITH_PCI
-	select ADK_TARGET_WITH_USB
-	select ADK_TARGET_WITH_USB_BOOT
-	help
-	 Support for Shuttle SA76 XPC.

target/x86_64/sys-available/tarox-pc

@@ -1,15 +0,0 @@
-config ADK_TARGET_SYSTEM_TAROX_PC
-	bool "Tarox PC"
-	depends on ADK_BROKEN
-	select ADK_x86_64
-	select ADK_tarox_pc
-	select ADK_LINUX_64
-	select ADK_KERNEL_SMP
-	select ADK_TARGET_WITH_VGA
-	select ADK_TARGET_WITH_SATA
-	select ADK_TARGET_WITH_INPUT
-	select ADK_TARGET_WITH_PCI
-	select ADK_TARGET_WITH_USB
-	select ADK_TARGET_WITH_USB_BOOT
-	help
-	 Support for Tarox Business PC.