add basic support for ag241 ar7 based dsl router

- my wag54g died. disable wag54g for now.
- add 2.6.32 support for ag241.
- cpmac still broken

mk/build.mk

@@ -298,7 +298,7 @@ ifneq (,$(filter rb%,${TARGET}))
 endif
 
 menuconfig: $(CONFIG)/mconf defconfig
-	if [ ! -f .config ];then \
+	@if [ ! -f .config ];then \
 		$(CONFIG)/conf -D .defconfig $(CONFIG_CONFIG_IN); \
 	fi
 	@$(CONFIG)/mconf $(CONFIG_CONFIG_IN)

target/Config.in

@@ -86,6 +86,9 @@ config ADK_mips_rescue
 config ADK_mipsel_rescue
 	tristate
 
+config ADK_ag241
+	tristate
+
 config ADK_wag54g
 	tristate
 
@@ -116,6 +119,7 @@ config ADK_TARGET
 	default "zaurus"  if ADK_arm
 	default "lemote"  if ADK_lemote
 	default "wag54g"  if ADK_wag54g
+	default "ag241"  if ADK_ag241
 	default "rescue-x86"  if ADK_x86_rescue
 	default "rescue-x86_64"  if ADK_x86_64_rescue
 	default "rescue-mips"  if ADK_mips_rescue
@@ -218,15 +222,26 @@ config ADK_LINUX_MIKROTIK
 	  http://www.mikrotik.com
 	  http://www.routerboards.com
 
-config ADK_LINUX_MIPS_WAG54G
-	bool "Linksys WAG54G"
+#config ADK_LINUX_MIPS_WAG54G
+#	bool "Linksys WAG54G"
+#	select ADK_KERNEL_NETDEVICES
+#	select ADK_KERNEL_NET_PCI
+#	select ADK_KERNEL_NET_ETHERNET
+#	select ADK_KERNEL_MII
+#	select ADK_wag54g
+#	help
+#	  Linksys WAG54G DSL router with Wireless.
+#	  (Texas Instruments AR7 platform)
+
+config ADK_LINUX_MIPS_AG241
+	bool "Linksys AG241v2"
 	select ADK_KERNEL_NETDEVICES
 	select ADK_KERNEL_NET_PCI
 	select ADK_KERNEL_NET_ETHERNET
 	select ADK_KERNEL_MII
-	select ADK_wag54g
+	select ADK_ag241
 	help
-	  Linksys WAG54G DSL router with Wireless.
+	  Linksys AG241 DSL router.
 	  (Texas Instruments AR7 platform)
 
 config ADK_LINUX_ARM_TOMTOM
@@ -545,6 +560,7 @@ config ADK_TARGET_ROOTFS_SQUASHFS
 	bool "squashfs read-only root filesystem"
 	depends on \
 		ADK_LINUX_CRIS_FOXBOARD || \
+		ADK_LINUX_MIPS_AG241 || \
 		ADK_LINUX_MIPS_WAG54G
 	help
 	  highly compressed read-only filesystem for flash.
@@ -569,6 +585,7 @@ config ADK_TARGET_ROOTFS_NFSROOT
 		ADK_LINUX_MIPS_RB433 || \
 		ADK_LINUX_MIPS_RB411 || \
 		ADK_LINUX_MIPS_WAG54G || \
+		ADK_LINUX_MIPS_AG241 || \
 		ADK_LINUX_MIPS64_LEMOTE
 	select ADK_KERNEL_NFS_FS
 	select ADK_KERNEL_NFS_V3

target/ag241/Makefile

@@ -0,0 +1,54 @@
+# $Id: Makefile 30 2008-09-04 13:31:09Z wbx $
+#-
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+include $(TOPDIR)/mk/kernel.mk
+include $(TOPDIR)/mk/modules.mk
+include $(TOPDIR)/mk/kernel-build.mk
+include $(TOPDIR)/mk/image.mk
+
+$(TOOLS_BUILD_DIR):
+	mkdir -p $(TOOLS_BUILD_DIR)
+
+tools-compile: $(TOOLS_BUILD_DIR)
+	$(MAKE) -C tools/addpattern
+	$(MAKE) -C tools/srec2bin
+	$(MAKE) -C tools/squashfs prepare compile install
+
+kernel-install: tools-compile
+	PATH='${TARGET_PATH}' \
+	mipsel-linux-objcopy -S -O srec $(LINUX_DIR)/vmlinux \
+		$(LINUX_DIR)/vmlinux.srec
+	PATH='${TARGET_PATH}' \
+	srec2bin $(LINUX_DIR)/vmlinux.srec $(LINUX_DIR)/vmlinux.bin
+	(dd if=/dev/zero bs=16 count=1; cat $(LINUX_DIR)/vmlinux.bin) > \
+		$(LINUX_DIR)/vmlinux.tmp
+	PATH='${TARGET_PATH}' \
+	addpattern -p AG3B -b -r 2.0 -i $(LINUX_DIR)/vmlinux.tmp \
+		-o $(BIN_DIR)/${ADK_TARGET}-${ARCH}-kernel	
+
+ifeq ($(FS),squashfs)
+imageinstall: $(BIN_DIR)/$(ROOTFSSQUASHFS)
+	${CP} ${BUILD_DIR}/${ROOTFSSQUASHFS} $(BIN_DIR)/$(ROOTFSSQUASHFS)
+	@echo
+	@echo The image file is $(ROOTFSSQUASHFS)
+	@echo 'You can flash the image via tftp:'
+	@echo 'tftp 192.168.1.1'
+	@echo 'tftp> binary'
+	@echo "tftp> put $(ROOTFSSQUASHFS) upgrade_code.bin"
+	@echo 'Login as user root with password linux123 via ssh or console'
+endif
+
+ifeq ($(FS),nfsroot)
+imageinstall: $(BIN_DIR)/$(ROOTFSTARBALL)
+	@echo
+	@echo 'The kernel file is: ${BIN_DIR}/${ADK_TARGET}-${ARCH}-kernel'
+	@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSTARBALL}'
+	@echo 'You can flash the kernel via tftp:'
+	@echo 'tftp 192.168.1.1'
+	@echo 'tftp> binary'
+	@echo 'tftp> put ag241-mips-kernel upgrade_code.bin'
+	@echo 'Login as user root with password linux123 via ssh or console'
+endif

target/ag241/files/etc/inittab

@@ -0,0 +1,3 @@
+::sysinit:/etc/init.d/rcS
+::shutdown:/etc/init.d/rcK
+ttyS0::respawn:/sbin/getty -i -L ttyS0 38400 vt100

target/ag241/files/etc/mdev.conf

@@ -0,0 +1,10 @@
+tun 0:0 660 >net/tun
+device-mapper 0:0 660 @mkdir /dev/mapper
+null 0:0 777
+zero 0:0 666
+u?random 0:0 644
+console 0:0 0600
+ptmx 0:0 666
+tty 0:0 666
+ttyS* 0:0 640
+.* 0:0 644 @/lib/mdev/init

target/ag241/kernel.config

@@ -0,0 +1,914 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Dec 15 19:52:06 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+CONFIG_AR7=y
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2E is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+CONFIG_TCP_CONG_CUBIC=y
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_AR7_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+# CONFIG_SWCONFIG is not set
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_CPMAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AR7_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_VLYNQ=y
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_AUFS_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="console=ttyS0,38400 cpmac.dumb_switch=1"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# OCF Configuration
+#
+# CONFIG_OCF_OCF is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

target/ag241/patches/ar7.patch

@@ -0,0 +1,78 @@
+diff -Nur linux-2.6.32.orig/arch/mips/ar7/platform.c linux-2.6.32/arch/mips/ar7/platform.c
+--- linux-2.6.32.orig/arch/mips/ar7/platform.c	2009-12-03 04:51:21.000000000 +0100
++++ linux-2.6.32/arch/mips/ar7/platform.c	2009-12-15 18:27:15.208942638 +0100
+@@ -509,7 +509,7 @@
+ 
+ 	memset(uart_port, 0, sizeof(struct uart_port) * 2);
+ 
+-	uart_port[0].type = PORT_16550A;
++	uart_port[0].type = PORT_AR7;
+ 	uart_port[0].line = 0;
+ 	uart_port[0].irq = AR7_IRQ_UART0;
+ 	uart_port[0].uartclk = ar7_bus_freq() / 2;
+@@ -524,7 +524,7 @@
+ 
+ 	/* Only TNETD73xx have a second serial port */
+ 	if (ar7_has_second_uart()) {
+-		uart_port[1].type = PORT_16550A;
++		uart_port[1].type = PORT_AR7;
+ 		uart_port[1].line = 1;
+ 		uart_port[1].irq = AR7_IRQ_UART1;
+ 		uart_port[1].uartclk = ar7_bus_freq() / 2;
+diff -Nur linux-2.6.32.orig/arch/mips/include/asm/page.h linux-2.6.32/arch/mips/include/asm/page.h
+--- linux-2.6.32.orig/arch/mips/include/asm/page.h	2009-12-03 04:51:21.000000000 +0100
++++ linux-2.6.32/arch/mips/include/asm/page.h	2009-12-14 22:03:51.157752807 +0100
+@@ -200,8 +200,11 @@
+ #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+ 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+ 
+-#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE)
+-#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET)
++#define UNCAC_ADDR(addr)       ((addr) - PAGE_OFFSET + UNCAC_BASE +    \
++                                PHYS_OFFSET)
++#define CAC_ADDR(addr)         ((addr) - UNCAC_BASE + PAGE_OFFSET -    \
++                                PHYS_OFFSET)
++
+ 
+ #include <asm-generic/memory_model.h>
+ #include <asm-generic/getorder.h>
+diff -Nur linux-2.6.32.orig/arch/mips/Kconfig linux-2.6.32/arch/mips/Kconfig
+--- linux-2.6.32.orig/arch/mips/Kconfig	2009-12-14 21:11:40.737752912 +0100
++++ linux-2.6.32/arch/mips/Kconfig	2009-12-14 21:00:48.533738664 +0100
+@@ -30,7 +30,6 @@
+ 	select CEVT_R4K
+ 	select CSRC_R4K
+ 	select IRQ_CPU
+-	select NO_EXCEPT_FILL
+ 	select SWAP_IO_SPACE
+ 	select SYS_HAS_CPU_MIPS32_R1
+ 	select SYS_HAS_EARLY_PRINTK
+diff -Nur linux-2.6.32.orig/arch/mips/kernel/traps.c linux-2.6.32/arch/mips/kernel/traps.c
+--- linux-2.6.32.orig/arch/mips/kernel/traps.c	2009-12-03 04:51:21.000000000 +0100
++++ linux-2.6.32/arch/mips/kernel/traps.c	2009-12-14 22:25:58.329754617 +0100
+@@ -1255,9 +1255,22 @@
+ 
+ 	exception_handlers[n] = handler;
+ 	if (n == 0 && cpu_has_divec) {
+-		*(u32 *)(ebase + 0x200) = 0x08000000 |
+-					  (0x03ffffff & (handler >> 2));
+-		local_flush_icache_range(ebase + 0x200, ebase + 0x204);
++              if ((handler ^ (ebase + 4)) & 0xfc000000) {
++                      /* lui k0, 0x0000 */
++                      *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16);
++                      /* ori k0, 0x0000 */
++                      *(u32 *)(ebase + 0x204) =
++                                      0x375a0000 | (handler & 0xffff);
++                      /* jr k0 */
++                      *(u32 *)(ebase + 0x208) = 0x03400008;
++                      /* nop */
++                      *(u32 *)(ebase + 0x20C) = 0x00000000;
++                      flush_icache_range(ebase + 0x200, ebase + 0x210);
++              } else {
++                      *(u32 *)(ebase + 0x200) =
++                              0x08000000 | (0x03ffffff & (handler >> 2));
++                      flush_icache_range(ebase + 0x200, ebase + 0x204);
++              }
+ 	}
+ 	return (void *)old_handler;
+ }

target/ag241/target.mk

@@ -0,0 +1,7 @@
+ARCH:=			mips
+CPU_ARCH:=		mipsel
+KERNEL_VERSION:=	2.6.32
+KERNEL_RELEASE:=	1
+KERNEL_MD5SUM:=		260551284ac224c3a43c4adac7df4879
+TARGET_OPTIMIZATION:=	-Os -pipe
+TARGET_CFLAGS_ARCH:=    -march=mips32

target/ag241/tools/addpattern/Makefile

@@ -0,0 +1,4 @@
+include $(TOPDIR)/rules.mk
+
+all:
+	$(HOSTCC) ${HOSTCFLAGS} -o ${STAGING_TOOLS}/bin/addpattern addpattern.c

target/ag241/tools/addpattern/addpattern.c

@@ -0,0 +1,255 @@
+/*
+ * Copyright (C) 2004  Manuel Novoa III  <mjn3@codepoet.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* July 29, 2004
+ *
+ * This is a hacked replacement for the 'addpattern' utility used to
+ * create wrt54g .bin firmware files.  It isn't pretty, but it does
+ * the job for me.
+ *
+ * Extensions:
+ *  -v allows setting the version string on the command line.
+ *  -{0|1} sets the (currently ignored) hw_ver flag in the header
+ *      to 0 or 1 respectively.
+ */
+
+/* January 12, 2005
+ * 
+ * Modified by rodent at rodent dot za dot net
+ * Support added for the new WRT54G v2.2 and WRT54GS v1.1 "flags"
+ * Without the flags set to 0x7, the above units will refuse to flash.
+ * 
+ * Extensions:
+ *  -{0|1|2} sets {0|1} sets hw_ver flag to 0/1. {2} sets hw_ver to 1
+ *     and adds the new hardware "flags" for the v2.2/v1.1 units
+*/
+
+/* January 1, 2007
+ *
+ * Modified by juan.i.gonzalez at subdown dot net
+ * Support added for the AG241v2  and similar
+ *
+ * Extensions:
+ *  -r #.# adds revision hardware flags. AG241v2 and similar.
+ *
+ * AG241V2 firmware sets the hw_ver to 0x44.
+ *
+ * Example: -r 2.0
+ *
+ * Convert 2.0 to 20 to be an integer, and add 0x30 to skip special ASCII
+ * #define HW_Version ((HW_REV * 10) + 0x30)  -> from cyutils.h
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+#include <sys/stat.h>
+
+/**********************************************************************/
+
+#define CODE_ID		"U2ND"		/* from code_pattern.h */
+#define CODE_PATTERN   "W54S"	/* from code_pattern.h */
+#define PBOT_PATTERN   "PBOT"
+
+#define CYBERTAN_VERSION	"v3.37.2" /* from cyutils.h */
+
+/* WRT54G v2.2 and WRT54GS v1.1 "flags" (from 3.37.32 firmware cyutils.h) */
+#define SUPPORT_4712_CHIP      0x0001
+#define SUPPORT_INTEL_FLASH    0x0002
+#define SUPPORT_5325E_SWITCH   0x0004
+
+struct code_header {			/* from cyutils.h */
+	char magic[4];
+	char res1[4];				/* for extra magic */
+	char fwdate[3];
+	char fwvern[3];
+	char id[4];					/* U2ND */
+	char hw_ver;    			/* 0: for 4702, 1: for 4712 -- new in 2.04.3 */
+	char unused;
+	unsigned char flags[2];       /* SUPPORT_ flags new for 3.37.2 (WRT54G v2.2 and WRT54GS v1.1) */
+	unsigned char res2[10];
+} ;
+
+/**********************************************************************/
+
+void usage(void) __attribute__ (( __noreturn__ ));
+
+void usage(void)
+{
+	fprintf(stderr, "Usage: addpattern [-i trxfile] [-o binfile] [-p pattern] [-g] [-b] [-v v#.#.#] [-r #.#] [-{0|1|2|4}] -h\n");
+	exit(EXIT_FAILURE);
+}
+
+int main(int argc, char **argv)
+{
+	char buf[1024];	/* keep this at 1k or adjust garbage calc below */
+	struct code_header *hdr;
+	FILE *in = stdin;
+	FILE *out = stdout;
+	char *ifn = NULL;
+	char *ofn = NULL;
+	char *pattern = CODE_PATTERN;
+	char *pbotpat = PBOT_PATTERN;
+	char *version = CYBERTAN_VERSION;
+	int gflag = 0;
+	int pbotflag = 0;
+	int c;
+	int v0, v1, v2;
+	size_t off, n;
+	time_t t;
+	struct tm *ptm;
+
+	fprintf(stderr, "mjn3's addpattern replacement - v0.81\n");
+
+	hdr = (struct code_header *) buf;
+	memset(hdr, 0, sizeof(struct code_header));
+
+	while ((c = getopt(argc, argv, "i:o:p:gbv:0124hr:")) != -1) {
+		switch (c) {
+			case 'i':
+				ifn = optarg;
+				break;
+			case 'o':
+				ofn = optarg;
+				break;
+			case 'p':
+				pattern = optarg;
+				break;
+			case 'g':
+				gflag = 1;
+				break;
+			case 'b':
+				pbotflag = 1;
+				break;
+			case 'v':			/* extension to allow setting version */
+				version = optarg;
+				break;
+			case '0':
+				hdr->hw_ver = 0;
+				break;
+			case '1':
+				hdr->hw_ver = 1;
+				break;
+			case '2': 			/* new 54G v2.2 and 54GS v1.1 flags */
+				hdr->hw_ver = 1;
+				hdr->flags[0] |= SUPPORT_4712_CHIP;
+				hdr->flags[0] |= SUPPORT_INTEL_FLASH;
+				hdr->flags[0] |= SUPPORT_5325E_SWITCH;
+				break;
+			case '4':
+				/* V4 firmware sets the flags to 0x1f */
+				hdr->hw_ver = 0;
+				hdr->flags[0] = 0x1f;
+				break;
+                        case 'r':
+                                hdr->hw_ver = (char)(atof(optarg)*10)+0x30;
+                                break;
+
+                        case 'h':
+			default:
+				usage();
+		}
+	}
+
+    	if (optind != argc || optind == 1) {
+		fprintf(stderr, "illegal arg \"%s\"\n", argv[optind]);
+		usage();
+	}
+
+	if (strlen(pattern) != 4) {
+		fprintf(stderr, "illegal pattern \"%s\": length != 4\n", pattern);
+		usage();
+	}
+
+	if (ifn && !(in = fopen(ifn, "r"))) {
+		fprintf(stderr, "can not open \"%s\" for reading\n", ifn);
+		usage();
+	}
+
+	if (ofn && !(out = fopen(ofn, "w"))) {
+		fprintf(stderr, "can not open \"%s\" for writing\n", ofn);
+		usage();
+	}
+
+	if (time(&t) == (time_t)(-1)) {
+		fprintf(stderr, "time call failed\n");
+		return EXIT_FAILURE;
+	}
+
+	ptm = localtime(&t);
+
+	if (3 != sscanf(version, "v%d.%d.%d", &v0, &v1, &v2)) {
+		fprintf(stderr, "bad version string \"%s\"\n", version);
+		return EXIT_FAILURE;
+	}
+
+	memcpy(&hdr->magic, pattern, 4);
+	if (pbotflag)
+		memcpy(&hdr->res1, pbotpat, 4);
+	hdr->fwdate[0] = ptm->tm_year % 100;
+	hdr->fwdate[1] = ptm->tm_mon + 1;
+	hdr->fwdate[2] = ptm->tm_mday;
+	hdr->fwvern[0] = v0;
+	hdr->fwvern[1] = v1;
+	hdr->fwvern[2] = v2;
+	memcpy(&hdr->id, CODE_ID, strlen(CODE_ID));
+
+	off = sizeof(struct code_header);
+
+	fprintf(stderr, "writing firmware v%d.%d.%d on %d/%d/%d (y/m/d)\n",
+			v0, v1, v2,
+			hdr->fwdate[0], hdr->fwdate[1], hdr->fwdate[2]);
+
+
+	while ((n = fread(buf + off, 1, sizeof(buf)-off, in) + off) > 0) {
+		off = 0;
+		if (n < sizeof(buf)) {
+			if (ferror(in)) {
+			FREAD_ERROR:
+				fprintf(stderr, "fread error\n");
+				return EXIT_FAILURE;
+			}
+			if (gflag) {
+				gflag = sizeof(buf) - n;
+				memset(buf + n, 0xff, gflag);
+				fprintf(stderr, "adding %d bytes of garbage\n", gflag);
+				n = sizeof(buf);
+			}
+		}
+		if (!fwrite(buf, n, 1, out)) {
+		FWRITE_ERROR:
+			fprintf(stderr, "fwrite error\n");
+			return EXIT_FAILURE;
+		}
+	}
+	
+	if (ferror(in)) {
+		goto FREAD_ERROR;
+	}
+
+	if (fflush(out)) {
+		goto FWRITE_ERROR;
+	}
+
+	fclose(in);
+	fclose(out);
+
+	return EXIT_SUCCESS;
+}

target/ag241/tools/rules.mk

@@ -0,0 +1,9 @@
+# $Id$
+#-
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+WRKDIR_BASE=    ${TOOLS_BUILD_DIR}
+WRKDIR=		${WRKDIR_BASE}
+
+include ${TOPDIR}/mk/buildhlp.mk

target/ag241/tools/squashfs/Makefile

@@ -0,0 +1,27 @@
+# $Id$
+#-
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		squashfs
+PKG_VERSION:=		4.0
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		a3c23391da4ebab0ac4a75021ddabf96
+PKG_SITES:=		${MASTER_SITE_SOURCEFORGE:=squashfs/}
+DISTFILES:=		${PKG_NAME}${PKG_VERSION}.tar.gz
+WRKDIST=		${WRKDIR}/$(PKG_NAME)${PKG_VERSION}
+
+include ../rules.mk
+
+$(WRKBUILD)/.compiled: ${WRKDIST}/.prepared
+	$(MAKE) -C $(WRKBUILD)/squashfs-tools
+	touch $@
+
+$(WRKBUILD)/.installed:
+	$(INSTALL_BIN) $(WRKBUILD)/squashfs-tools/mksquashfs \
+		${STAGING_TOOLS}/bin
+	touch $@
+
+include $(TOPDIR)/mk/tools.mk

target/ag241/tools/srec2bin/Makefile

@@ -0,0 +1,4 @@
+include $(TOPDIR)/rules.mk
+
+all:
+	$(HOSTCC) ${HOSTCFLAGS} -o ${STAGING_TOOLS}/bin/srec2bin srec2bin.c

target/ag241/tools/srec2bin/srec2bin.c

@@ -0,0 +1,524 @@
+#include <stdio.h>
+#include <ctype.h>
+#include <string.h>
+
+//Rev 0.1 Original
+// 8 Jan 2001  MJH  Added code to write data to Binary file
+//                  note: outputfile is name.bin, where name is first part
+//                  of input file.  ie tmp.rec -> tmp.bin
+//
+//   srec2bin <input SREC file> <Output Binary File> <If Present, Big Endian>
+//
+//   TAG   
+//        bit32u TAG_BIG     = 0xDEADBE42;
+//        bit32u TAG_LITTLE  = 0xFEEDFA42;
+//
+//  File Structure
+//
+//  TAG    :   32 Bits
+//  [DATA RECORDS]
+//
+//  Data Records Structure
+//
+//  LENGTH  :  32 Bits    <- Length of DATA, excludes ADDRESS and CHECKSUM
+//  ADDRESS :  32 Bits
+//  DATA    :  8 Bits * LENGTH
+//  CHECKSUM:  32 Bits    <-  0 - (Sum of Length --> End of Data)
+//
+//  Note : If Length == 0, Address will be Program Start
+//
+//
+//  
+//
+//
+
+#define MajRevNum 0
+#define MinRevNum 2
+
+
+#define EndianSwitch(x) ((x >> 24) | (x << 24) | ((x << 8) & (0x00FF0000)) | ((x >> 8) & (0x0000FF00)) )
+
+typedef unsigned char bit8u;
+typedef unsigned int bit32u;
+typedef int bit32;
+
+#define FALSE 0
+#define TRUE (!FALSE)
+
+
+bit32u CheckSum;
+int RecStart;
+int debug;
+int verbose;
+
+FILE *OpenOutputFile( char *Name );
+FILE *fOut;
+bit32u RecLength=0;
+
+bit32u AddressCurrent;
+
+bit32u gh(char *cp,int nibs);
+
+int BigEndian;
+
+int inputline;
+
+// char buf[16*1024];
+
+char buffer[2048];
+char *cur_ptr;
+int cur_line=0;
+int cur_len=0;
+
+int s1s2s3_total=0;
+
+bit32u PBVal;
+int    PBValid;
+bit32u PBAdr;
+
+
+void dumpfTell(char *s, bit32u Value)
+{
+    int Length;
+    Length = (int) RecLength;
+    if (debug)
+          printf("[%s  ] ftell()[0x%08lX] Length[0x%4X] Length[%4d] Value[0x%08x]\n",
+                s, ftell(fOut), Length, Length, Value);
+}
+
+void DispHex(bit32u Hex)
+{
+//    printf("%X", Hex);
+}
+
+void WaitDisplay(void)
+{
+   static int Count=0;
+   static int Index=0;
+   char iline[]={"-\\|/"};
+
+   Count++;
+   if ((Count % 32)==0)
+   {
+     if (verbose)
+        printf("%c%c",iline[Index++],8);
+     Index &= 3;
+   }
+}
+
+
+void binOut32 ( bit32u Data )
+{
+// On UNIX machine all 32bit writes need ENDIAN switched
+//    Data = EndianSwitch(Data);
+//    fwrite( &Data, sizeof(bit32u), 1, fOut);
+
+   char sdat[4];
+   int i;
+
+   for(i=0;i<4;i++)
+    sdat[i]=(char)(Data>>(i*8));
+   fwrite( sdat, 1, 4, fOut);
+   dumpfTell("Out32" , Data);
+}
+
+// Only update RecLength on Byte Writes
+// All 32 bit writes will be for Length etc
+
+void binOut8 ( bit8u Data )
+{
+    int n;
+    dumpfTell("B4Data" , (bit32u) (Data & 0xFF) );
+    n = fwrite( &Data, sizeof(bit8u), 1, fOut);
+    if (n != 1)
+        printf("Error in writing %X for Address 0x%8X\n", Data, AddressCurrent);
+    RecLength += 1;
+}
+
+//  Currently ONLY used for outputting Program Start
+
+void binRecStart(bit32u Address)
+{
+    RecLength      = 0;
+    CheckSum       = Address;
+    RecStart       = TRUE;
+
+    if (debug)
+          printf("[RecStart] CheckSum[0x%08X] Length[%4d] Address[0x%08X]\n",
+                CheckSum, RecLength, Address);
+
+
+    dumpfTell("RecLength", RecLength);
+    binOut32( RecLength );
+    dumpfTell("Address", Address);
+    binOut32( Address );
+}
+
+void binRecEnd(void)
+{
+    long RecEnd;
+
+    if (!RecStart)   //  if no record started, do not end it
+    {
+        return;
+    }
+
+    RecStart = FALSE;
+
+
+    RecEnd = ftell(fOut);         // Save Current position
+
+    if (debug)
+          printf("[RecEnd  ] CheckSum[0x%08X] Length[%4d] Length[0x%X] RecEnd[0x%08lX]\n",
+                CheckSum, RecLength, RecLength, RecEnd);
+
+    fseek( fOut, -((long) RecLength), SEEK_CUR);  // move back Start Of Data
+
+    dumpfTell("Data   ", -1);
+
+    fseek( fOut, -4, SEEK_CUR);  // move back Start Of Address
+
+    dumpfTell("Address   ", -1);
+
+    fseek( fOut, -4, SEEK_CUR);  // move back Start Of Length
+
+    dumpfTell("Length   ", -1);
+
+    binOut32( RecLength );
+
+    fseek( fOut, RecEnd, SEEK_SET);  // move to end of Record
+
+    CheckSum += RecLength;
+
+    CheckSum =  ~CheckSum + 1;  // Two's complement
+
+    binOut32( CheckSum );
+
+    if (verbose)
+        printf("[Created Record of %d Bytes with CheckSum [0x%8X]\n", RecLength, CheckSum);
+}
+
+void binRecOutProgramStart(bit32u Address)
+{
+    if (Address != (AddressCurrent+1))
+    {
+        binRecEnd();
+        binRecStart(Address);
+    }
+    AddressCurrent = Address;
+}
+void binRecOutByte(bit32u Address, bit8u Data)
+{
+    //  If Address is one after Current Address, output Byte
+    //  If not, close out last record, update Length, write checksum
+    //  Then Start New Record, updating Current Address
+
+    if (Address != (AddressCurrent+1))
+    {
+        binRecEnd();
+        binRecStart(Address);
+    }
+    AddressCurrent = Address;
+    CheckSum += Data;
+    binOut8( Data );
+}
+
+//=============================================================================
+//       SUPPORT FUNCTIONS
+//=============================================================================
+int readline(FILE *fil,char *buf,int len)
+{
+    int rlen;
+    
+    rlen=0;
+    if (len==0)  return(0);
+    while(1)
+    {
+      if (cur_len==0)
+      {
+        cur_len=fread(buffer, 1, sizeof(buffer), fil);
+        if (cur_len==0)
+        {
+          if (rlen)
+          {
+            *buf=0;
+            return(rlen);
+          }
+          return(-1);
+        }
+        cur_ptr=buffer;
+      }
+      if (cur_len)
+      {
+        if (*cur_ptr=='\n')
+        {
+          *buf=0;
+          cur_ptr++;
+          cur_len--;
+          return(rlen);
+        }
+         else
+         {
+           if ((len>1)&&(*cur_ptr!='\r'))
+           {
+             *buf++=*cur_ptr++;
+             len--;
+           }
+           else
+             cur_ptr++;
+
+           rlen++;
+           cur_len--;
+         }
+      }
+      else
+      {
+        *buf=0;
+        cur_ptr++;
+        cur_len--;
+        return(rlen);
+      }
+    }
+}
+
+
+int SRLerrorout(char *c1,char *c2)
+{
+  printf("\nERROR: %s - '%s'.",c1,c2);
+  return(FALSE);
+}
+
+
+int checksum(char *cp,int count)
+{
+  char *scp;
+  int cksum;
+  int dum;
+
+  scp=cp;
+  while(*scp)
+  {
+    if (!isxdigit(*scp++))
+      return(SRLerrorout("Invalid hex digits",cp));
+  }
+  scp=cp;
+
+  cksum=count;
+
+  while(count)
+  {
+    cksum += gh(scp,2);
+    if (count == 2)
+        dum = ~cksum;
+    scp += 2;
+    count--;
+  }
+  cksum&=0x0ff; 
+  //  printf("\nCk:%02x",cksum);
+  return(cksum==0x0ff);
+}
+
+bit32u gh(char *cp,int nibs)
+{
+  int i;
+  bit32u j;
+
+  j=0;
+
+  for(i=0;i<nibs;i++)
+  {
+    j<<=4;
+    if ((*cp>='a')&&(*cp<='z')) *cp &= 0x5f;
+    if ((*cp>='0')&&(*cp<='9')) 
+      j += (*cp-0x30);
+     else
+      if ((*cp>='A')&&(*cp<='F'))
+        j += (*cp-0x37);
+       else
+        SRLerrorout("Bad Hex char", cp);
+    cp++;
+  }
+  return(j);
+}
+
+
+//=============================================================================
+//       PROCESS SREC LINE
+//=============================================================================
+
+int srecLine(char *pSrecLine)
+{
+    char *scp,ch;
+    int  itmp,count,dat;
+    bit32u adr;
+    static bit32u RecordCounter=0;
+
+    cur_line++;
+    scp=pSrecLine;
+  
+    if (*pSrecLine!='S')
+      return(SRLerrorout("Not an Srecord file",scp));
+    pSrecLine++;
+    if (strlen(pSrecLine)<4)
+      return(SRLerrorout("Srecord too short",scp));
+  
+    ch=*pSrecLine++;
+  
+    count=gh(pSrecLine,2);
+  
+    pSrecLine += 2;
+  
+  //  if(debug)
+  //        printf("count %d, strlen(pSrecLine) = %d, pSrecLine =[%s]\n", count, strlen(pSrecLine), pSrecLine);
+     RecordCounter++;
+     DispHex(RecordCounter);
+  
+    if ((count*2) != strlen(pSrecLine)) return(SRLerrorout("Count field larger than record",scp));
+  
+    if (!checksum(pSrecLine, count)) return(SRLerrorout("Bad Checksum",scp));
+  
+    switch(ch)
+    {
+        case '0': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
+                  itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2;
+                  if (itmp) return(SRLerrorout("Srecord 1 address not zero",scp));
+        break;
+        case '1': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
+                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
+        break;
+        case '2': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp));
+                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
+        break;
+        case '3': if (count<5) return(SRLerrorout("Invalid Srecord count field",scp));
+                  adr=gh(pSrecLine,8); pSrecLine+=8; count-=4;
+                  count--;
+                  while(count)
+                  {
+                    dat=gh(pSrecLine,2); pSrecLine+=2; count--;
+                    binRecOutByte(adr, (char) (dat & 0xFF));
+                    adr++;
+                  }
+                  s1s2s3_total++;
+        break;
+        case '4': return(SRLerrorout("Invalid Srecord type",scp));
+        break;
+        case '5': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
+                  itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2;
+                  if (itmp|=s1s2s3_total) return(SRLerrorout("Incorrect number of S3 Record processed",scp));
+        break;
+        case '6': return(SRLerrorout("Invalid Srecord type",scp));
+        break;
+        case '7': // PROGRAM START
+                  if (count<5) return(SRLerrorout("Invalid Srecord count field",scp));
+                  adr=gh(pSrecLine,8); pSrecLine+=8; count-=4;
+                  if (count!=1) return(SRLerrorout("Invalid Srecord count field",scp));
+                  binRecOutProgramStart(adr);
+        break;
+        case '8': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp));
+                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
+        break;
+        case '9': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
+                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
+        break;
+        default:
+        break;
+    }
+    return(TRUE);
+}
+ 
+
+//=============================================================================
+//       MAIN LOGIC, READS IN LINE AND OUTPUTS BINARY
+//=============================================================================
+
+int srec2bin(int argc,char *argv[],int verbose)
+{
+    int i,rlen,sts;
+    FILE *fp;
+    char ac;
+    char buff[256];
+    bit32u TAG_BIG     = 0xDEADBE42;
+    bit32u TAG_LITTLE  = 0xFEEDFA42;
+
+    bit32u Tag;
+
+  
+    if(argc < 3)
+    {
+      printf("\nError: <srec2bin <srec input file> <bin output file>\n\n");
+      return(0);
+    }
+  
+    if (argc > 3) BigEndian=TRUE; else BigEndian=FALSE;
+
+    if (BigEndian)
+        Tag = TAG_BIG;
+    else
+        Tag = TAG_LITTLE;
+
+    if (verbose)
+       printf("\nEndian: %s, Tag is 0x%8X\n",(BigEndian)?"BIG":"LITTLE", Tag);
+
+    fp = fopen(argv[1],"rt");
+
+    if (fp==NULL)
+    {
+      printf("\nError: Opening input file, %s.", argv[1]);
+      return(0);
+    }
+  
+    fOut = fopen( argv[2], "wb");
+    
+    if (fOut==NULL)
+    {
+      printf("\nError: Opening Output file, %s.", argv[2]);
+      if(fp) fclose(fp);
+      return(0);
+    }
+ 
+    RecStart = FALSE;
+
+    AddressCurrent = 0xFFFFFFFFL;
+
+    // Setup Tag 
+  
+    dumpfTell("Tag", Tag);
+
+    binOut32(Tag);
+
+  
+    inputline=0;
+    sts=TRUE;
+
+    rlen = readline(fp,buff,sizeof buff);
+
+    while( (sts) && (rlen != -1))
+    {
+        if (strlen(buff))
+        {
+            sts &= srecLine(buff);
+            WaitDisplay();
+        }
+       rlen = readline(fp,buff,sizeof buff);
+    }
+
+  
+  //  printf("PC: 0x%08X, Length 0x%08X, Tag 0x%08X\n", ProgramStart, RecLength, TAG_LITTLE);
+  
+    binRecEnd();
+
+    if(fp) fclose(fp);
+    if(fOut) fclose(fOut);
+
+    return(1);
+}
+
+main(int argc, char *argv[])
+{
+    debug = TRUE;
+    debug = FALSE;
+    verbose = FALSE;
+    srec2bin(argc,argv,verbose);
+    return 0;
+}
+

target/ag241/uclibc.config

@@ -0,0 +1,233 @@
+#
+# Automatically generated make config: don't edit
+# Version: 0.9.30.1
+# Sun Aug 23 20:28:49 2009
+#
+# TARGET_alpha is not set
+# TARGET_arm is not set
+# TARGET_avr32 is not set
+# TARGET_bfin is not set
+# TARGET_cris is not set
+# TARGET_e1 is not set
+# TARGET_frv is not set
+# TARGET_h8300 is not set
+# TARGET_hppa is not set
+# TARGET_i386 is not set
+# TARGET_i960 is not set
+# TARGET_ia64 is not set
+# TARGET_m68k is not set
+# TARGET_microblaze is not set
+TARGET_mips=y
+# TARGET_nios is not set
+# TARGET_nios2 is not set
+# TARGET_powerpc is not set
+# TARGET_sh is not set
+# TARGET_sh64 is not set
+# TARGET_sparc is not set
+# TARGET_v850 is not set
+# TARGET_vax is not set
+# TARGET_x86_64 is not set
+# TARGET_xtensa is not set
+
+#
+# Target Architecture Features and Options
+#
+TARGET_ARCH="mips"
+FORCE_OPTIONS_FOR_ARCH=y
+ARCH_CFLAGS="-mno-split-addresses"
+CONFIG_MIPS_O32_ABI=y
+# CONFIG_MIPS_N32_ABI is not set
+# CONFIG_MIPS_N64_ABI is not set
+# CONFIG_MIPS_ISA_1 is not set
+# CONFIG_MIPS_ISA_2 is not set
+# CONFIG_MIPS_ISA_3 is not set
+# CONFIG_MIPS_ISA_4 is not set
+CONFIG_MIPS_ISA_MIPS32=y
+# CONFIG_MIPS_ISA_MIPS32R2 is not set
+# CONFIG_MIPS_ISA_MIPS64 is not set
+TARGET_SUBARCH=""
+
+#
+# Using ELF file format
+#
+ARCH_ANY_ENDIAN=y
+ARCH_LITTLE_ENDIAN=y
+# ARCH_WANTS_BIG_ENDIAN is not set
+ARCH_WANTS_LITTLE_ENDIAN=y
+ARCH_HAS_MMU=y
+ARCH_USE_MMU=y
+UCLIBC_HAS_FLOATS=y
+UCLIBC_HAS_FPU=y
+DO_C99_MATH=y
+UCLIBC_HAS_FENV=y
+KERNEL_HEADERS="/home/wbx/lemote/toolchain_build_mipsel/libc_dev/usr/include"
+HAVE_DOT_CONFIG=y
+
+#
+# General Library Settings
+#
+# HAVE_NO_PIC is not set
+DOPIC=y
+# ARCH_HAS_NO_SHARED is not set
+# ARCH_HAS_NO_LDSO is not set
+HAVE_SHARED=y
+# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
+LDSO_LDD_SUPPORT=y
+LDSO_CACHE_SUPPORT=y
+# LDSO_PRELOAD_FILE_SUPPORT is not set
+LDSO_BASE_FILENAME="ld.so"
+# UCLIBC_STATIC_LDCONFIG is not set
+LDSO_RUNPATH=y
+UCLIBC_CTOR_DTOR=y
+# LDSO_GNU_HASH_SUPPORT is not set
+# HAS_NO_THREADS is not set
+UCLIBC_HAS_THREADS=y
+# PTHREADS_DEBUG_SUPPORT is not set
+LINUXTHREADS_OLD=y
+UCLIBC_HAS_SYSLOG=y
+UCLIBC_HAS_LFS=y
+# MALLOC is not set
+# MALLOC_SIMPLE is not set
+MALLOC_STANDARD=y
+MALLOC_GLIBC_COMPAT=y
+UCLIBC_DYNAMIC_ATEXIT=y
+COMPAT_ATEXIT=y
+UCLIBC_SUSV3_LEGACY=y
+# UCLIBC_SUSV3_LEGACY_MACROS is not set
+# UCLIBC_HAS_STUBS is not set
+UCLIBC_HAS_SHADOW=y
+UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
+UCLIBC_HAS___PROGNAME=y
+UCLIBC_HAS_PTY=y
+ASSUME_DEVPTS=y
+UNIX98PTY_ONLY=y
+# UCLIBC_HAS_GETPT is not set
+UCLIBC_HAS_TM_EXTENSIONS=y
+UCLIBC_HAS_TZ_CACHING=y
+UCLIBC_HAS_TZ_FILE=y
+UCLIBC_HAS_TZ_FILE_READ_MANY=y
+UCLIBC_TZ_FILE_PATH="/etc/TZ"
+
+#
+# Advanced Library Settings
+#
+UCLIBC_PWD_BUFFER_SIZE=256
+UCLIBC_GRP_BUFFER_SIZE=256
+
+#
+# Support various families of functions
+#
+# UCLIBC_LINUX_MODULE_24 is not set
+UCLIBC_LINUX_SPECIFIC=y
+UCLIBC_HAS_GNU_ERROR=y
+UCLIBC_BSD_SPECIFIC=y
+UCLIBC_HAS_BSD_ERR=y
+# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set
+# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set
+# UCLIBC_NTP_LEGACY is not set
+# UCLIBC_SV4_DEPRECATED is not set
+UCLIBC_HAS_REALTIME=y
+UCLIBC_HAS_ADVANCED_REALTIME=y
+UCLIBC_HAS_EPOLL=y
+UCLIBC_HAS_XATTR=y
+# UCLIBC_HAS_PROFILING is not set
+UCLIBC_HAS_CRYPT_IMPL=y
+UCLIBC_HAS_CRYPT=y
+UCLIBC_HAS_NETWORK_SUPPORT=y
+UCLIBC_HAS_SOCKET=y
+UCLIBC_HAS_IPV4=y
+UCLIBC_HAS_IPV6=y
+UCLIBC_HAS_RPC=y
+UCLIBC_HAS_FULL_RPC=y
+UCLIBC_HAS_REENTRANT_RPC=y
+UCLIBC_USE_NETLINK=y
+UCLIBC_SUPPORT_AI_ADDRCONFIG=y
+UCLIBC_HAS_BSD_RES_CLOSE=y
+
+#
+# String and Stdio Support
+#
+UCLIBC_HAS_STRING_GENERIC_OPT=y
+UCLIBC_HAS_STRING_ARCH_OPT=y
+UCLIBC_HAS_CTYPE_TABLES=y
+UCLIBC_HAS_CTYPE_SIGNED=y
+# UCLIBC_HAS_CTYPE_UNSAFE is not set
+UCLIBC_HAS_CTYPE_CHECKED=y
+# UCLIBC_HAS_CTYPE_ENFORCED is not set
+UCLIBC_HAS_WCHAR=y
+# UCLIBC_HAS_LOCALE is not set
+UCLIBC_HAS_HEXADECIMAL_FLOATS=y
+UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
+UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
+UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
+# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
+UCLIBC_HAS_STDIO_BUFSIZ_4096=y
+# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
+UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
+# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
+UCLIBC_HAS_STDIO_GETC_MACRO=y
+UCLIBC_HAS_STDIO_PUTC_MACRO=y
+UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
+# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
+UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
+UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
+UCLIBC_HAS_PRINTF_M_SPEC=y
+UCLIBC_HAS_ERRNO_MESSAGES=y
+# UCLIBC_HAS_SYS_ERRLIST is not set
+UCLIBC_HAS_SIGNUM_MESSAGES=y
+# UCLIBC_HAS_SYS_SIGLIST is not set
+UCLIBC_HAS_GNU_GETOPT=y
+UCLIBC_HAS_GNU_GETSUBOPT=y
+
+#
+# Big and Tall
+#
+UCLIBC_HAS_REGEX=y
+UCLIBC_HAS_REGEX_OLD=y
+UCLIBC_HAS_FNMATCH=y
+UCLIBC_HAS_FNMATCH_OLD=y
+UCLIBC_HAS_WORDEXP=y
+UCLIBC_HAS_FTW=y
+UCLIBC_HAS_GLOB=y
+UCLIBC_HAS_GNU_GLOB=y
+
+#
+# Library Installation Options
+#
+SHARED_LIB_LOADER_PREFIX="/lib"
+RUNTIME_PREFIX="/"
+DEVEL_PREFIX="/usr/"
+
+#
+# Security options
+#
+# UCLIBC_BUILD_PIE is not set
+UCLIBC_HAS_ARC4RANDOM=y
+# HAVE_NO_SSP is not set
+# UCLIBC_HAS_SSP is not set
+UCLIBC_BUILD_RELRO=y
+# UCLIBC_BUILD_NOW is not set
+UCLIBC_BUILD_NOEXECSTACK=y
+
+#
+# uClibc development/debugging options
+#
+CROSS_COMPILER_PREFIX=""
+UCLIBC_EXTRA_CFLAGS=""
+# DODEBUG is not set
+# DODEBUG_PT is not set
+DOSTRIP=y
+# DOASSERTS is not set
+# SUPPORT_LD_DEBUG is not set
+# SUPPORT_LD_DEBUG_EARLY is not set
+# UCLIBC_MALLOC_DEBUGGING is not set
+WARNINGS="-Wall"
+# EXTRA_WARNINGS is not set
+# DOMULTI is not set
+# UCLIBC_MJN3_ONLY is not set