experimental midori support

package/geoclue/Makefile

@@ -0,0 +1,29 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		geoclue
+PKG_VERSION:=		1.99.3
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		514efbecd69c78b3e0a3d86012b7d88c
+PKG_DESCR:=		D-Bus service that provides location information
+PKG_SECTION:=		libs
+PKG_DEPENDS:=		json-glib
+PKG_BUILDDEP:=		json-glib
+PKG_URL:=		http://www.freedesktop.org/wiki/Software/GeoClue/
+PKG_SITES:=		http://www.freedesktop.org/software/geoclue/releases/1.99/
+PKG_OPTS:=		dev
+
+DISTFILES:=             ${PKG_NAME}-${PKG_VERSION}.tar.xz
+
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call PKG_template,GEOCLUE,geoclue,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION},${PKG_OPTS}))
+
+geoclue-install:
+	$(INSTALL_DIR) $(IDIR_GEOCLUE)/usr/lib
+	$(CP) $(WRKINST)/usr/lib/geoclue*.so* \
+		$(IDIR_GEOCLUE)/usr/lib
+
+include ${TOPDIR}/mk/pkg-bottom.mk

package/harfbuzz/Makefile

@@ -5,13 +5,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=		harfbuzz
 PKG_VERSION:=		0.9.9
-PKG_RELEASE:=		2
+PKG_RELEASE:=		3
 PKG_MD5SUM:=		e901ffe556d706b7d43b272f83be7f09
 PKG_DESCR:=		OpenType text shaping engine
 PKG_SECTION:=		libs
 PKG_SITES:=		http://www.freedesktop.org/software/harfbuzz/release/
-PKG_DEPENDS:=		libstdcxx cairo
-PKG_BUILDDEP:=		libstdcxx cairo
+PKG_DEPENDS:=		libstdcxx cairo icu4c
+PKG_BUILDDEP:=		libstdcxx cairo icu4c
 PKG_OPTS:=		dev
 
 PKG_ARCH_DEPENDS:=	!m68k
@@ -22,6 +22,10 @@ include $(TOPDIR)/mk/package.mk
 
 $(eval $(call PKG_template,HARFBUZZ,harfbuzz,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION},${PKG_OPTS}))
 
+pre-install:
+	$(INSTALL_DIR) $(WRKINST)/usr/include/harfbuzz
+	$(CP) $(WRKBUILD)/src/hb-icu.h $(WRKINST)/usr/include/harfbuzz
+
 harfbuzz-install:
 	$(INSTALL_DIR) $(IDIR_HARFBUZZ)/usr/lib
 	$(CP) $(WRKINST)/usr/lib/libharfbuzz*.so* \

package/icu4c/Makefile

@@ -0,0 +1,47 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		icu4c
+PKG_VERSION:=		52.1
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		9e96ed4c1d99c0d14ac03c140f9f346c
+PKG_DESCR:=		unicode and globalization library
+PKG_SECTION:=		libs
+PKG_BUILDDEP:=		icu4c-host
+PKG_URL:=		http://icu-project.org
+PKG_SITES:=		http://download.icu-project.org/files/icu4c/52.1/
+PKG_OPTS:=		dev
+
+DISTFILES:=             ${PKG_NAME}-52_1-src.tgz
+
+WRKDIST=		${WRKDIR}/icu/source
+
+include $(TOPDIR)/mk/host.mk
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call HOST_template,ICU4C,icu4c,$(PKG_VERSION)-${PKG_RELEASE}))
+$(eval $(call PKG_template,ICU4C,icu4c,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION},${PKG_OPTS}))
+
+HOST_STYLE:=		auto
+HOST_CONFIGURE_ARGS+=	--enable-extras=no \
+			--enable-samples=no \
+			--enable-tests=no \
+			--enable-shared=no \
+			--enable-dyload=no \
+			--enable-static
+CONFIGURE_ARGS+=	--with-cross-build=${HOST_BUILD_DIR}/w-${PKG_NAME}-${PKG_VERSION}-${PKG_RELEASE}-host/icu/source \
+			--enable-extras=no \
+			--enable-samples=no \
+			--enable-tests=no \
+
+icu4c-hostinstall:
+
+icu4c-install:
+	$(INSTALL_DIR) $(IDIR_ICU4C)/usr/lib
+	$(CP) $(WRKINST)/usr/lib/libicuuc.so* \
+		$(IDIR_ICU4C)/usr/lib
+
+include ${TOPDIR}/mk/host-bottom.mk
+include ${TOPDIR}/mk/pkg-bottom.mk

package/json-glib/Makefile

@@ -0,0 +1,27 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		json-glib
+PKG_VERSION:=		0.14.2
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		2a22832c4654156a35b38ee027f6f065
+PKG_DESCR:=		a library providing serialization and deserialization support for the JavaScript Object Notation (JSON) format 
+PKG_SECTION:=		libs
+PKG_URL:=		https://wiki.gnome.org/JsonGlib/
+PKG_SITES:=		http://ftp.gnome.org/pub/GNOME/sources/json-glib/0.14/
+PKG_OPTS:=		dev
+
+DISTFILES:=             ${PKG_NAME}-${PKG_VERSION}.tar.xz
+
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call PKG_template,JSON_GLIB,json-glib,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION},${PKG_OPTS}))
+
+json-glib-install:
+	$(INSTALL_DIR) $(IDIR_JSON_GLIB)/usr/lib
+	$(CP) $(WRKINST)/usr/lib/libjson-glib*.so* \
+		$(IDIR_JSON_GLIB)/usr/lib
+
+include ${TOPDIR}/mk/pkg-bottom.mk

package/libcroco/Makefile

@@ -0,0 +1,32 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		libcroco
+PKG_VERSION:=		0.6.8
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		767e73c4174f75b99695d4530fd9bb80
+PKG_DESCR:=		CSS2 parsing and manipulation library
+PKG_SECTION:=		libs
+PKG_URL:=		https://github.com/GNOME/libcroco
+PKG_SITES:=		http://ftp.gnome.org/pub/gnome/sources/libcroco/0.6/
+PKG_OPTS:=		dev
+
+DISTFILES:=             ${PKG_NAME}-${PKG_VERSION}.tar.xz
+
+include $(TOPDIR)/mk/host.mk
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call HOST_template,LIBCROCO,libcroco,$(PKG_VERSION)-${PKG_RELEASE}))
+$(eval $(call PKG_template,LIBCROCO,libcroco,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION},${PKG_OPTS}))
+
+HOST_STYLE:=		auto
+
+libcroco-install:
+	$(INSTALL_DIR) $(IDIR_LIBCROCO)/usr/lib
+	$(CP) $(WRKINST)/usr/lib/libcroco*.so* \
+		$(IDIR_LIBCROCO)/usr/lib
+
+include ${TOPDIR}/mk/host-bottom.mk
+include ${TOPDIR}/mk/pkg-bottom.mk

package/librsvg/Makefile

@@ -0,0 +1,34 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		librsvg
+PKG_VERSION:=		2.40.2
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		acdecdb9f08f3bf662a68bf7dafb8b82
+PKG_DESCR:=		SVG library
+PKG_BUILDDEP:=		libcroco
+HOST_BUILDDEP:=		libcroco-host
+PKG_SECTION:=		libs
+PKG_URL:=		https://wiki.gnome.org/action/show/Projects/LibRsvg?action=show&redirect=LibRsvg
+PKG_SITES:=		http://ftp.gnome.org/pub/gnome/sources/librsvg/2.40/
+
+DISTFILES:=		${PKG_NAME}-${PKG_VERSION}.tar.xz
+
+include $(TOPDIR)/mk/host.mk
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call HOST_template,LIBRSVG,librsvg,$(PKG_VERSION)-${PKG_RELEASE}))
+$(eval $(call PKG_template,LIBRSVG,librsvg,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION}))
+
+HOST_STYLE:=		auto
+CONFIGURE_ARGS+=	--enable-introspection=no
+
+librsvg-install:
+	$(INSTALL_DIR) $(IDIR_LIBRSVG)/usr/lib
+	$(CP) $(WRKINST)/usr/lib/librsvg*.so* \
+		$(IDIR_LIBRSVG)/usr/lib
+
+include ${TOPDIR}/mk/host-bottom.mk
+include ${TOPDIR}/mk/pkg-bottom.mk

package/libsecret/Makefile

@@ -0,0 +1,31 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		libsecret
+PKG_VERSION:=		0.16
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		ab0edcd5887a6fe78c948e36b6341858
+PKG_DESCR:=		library for storing and retrieving passwords
+PKG_SECTION:=		libs
+PKG_DEPENDS:=		libgcrypt
+PKG_BUILDDEP:=		autotool libgcrypt
+PKG_URL:=		https://wiki.gnome.org/Libsecret
+PKG_SITES:=		https://git.gnome.org/browse/libsecret/snapshot/
+PKG_OPTS:=		dev
+
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call PKG_template,LIBSECRET,libsecret,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION},${PKG_OPTS}))
+
+AUTOTOOL_STYLE:=	autoreconf
+CONFIGURE_ARGS+=	--enable-vala=no \
+			--enable-gcrypt
+
+libsecret-install:
+	$(INSTALL_DIR) $(IDIR_LIBSECRET)/usr/lib
+	$(CP) $(WRKINST)/usr/lib/libsecret*.so* \
+		$(IDIR_LIBSECRET)/usr/lib
+
+include ${TOPDIR}/mk/pkg-bottom.mk

package/libsecret/patches/patch-Makefile_am

@@ -0,0 +1,26 @@
+--- libsecret-0.16.orig/Makefile.am	2013-08-26 17:42:16.000000000 +0200
++++ libsecret-0.16/Makefile.am	2013-11-22 14:38:52.000000000 +0100
+@@ -3,7 +3,7 @@ include $(top_srcdir)/Makefile.decl
+ 
+ ACLOCAL_AMFLAGS = -I build/m4 ${ACLOCAL_FLAGS}
+ 
+-SUBDIRS = build egg libsecret tool po docs .
++SUBDIRS = build egg libsecret tool .
+ 
+ DISTCHECK_CONFIGURE_FLAGS = \
+ 	--enable-debug=yes \
+@@ -42,14 +42,9 @@ upload-release: $(DIST_ARCHIVES)
+ upload-docs:
+ 	rsync -Hvax docs/reference/libsecret/html/./ master.gnome.org:public_html/libsecret-docs/
+ 
+-if HAVE_VALAC
+-dist-check-valac:
+-
+-else
+ dist-check-valac:
+ 	@echo "*** valac must be installed and enabled in order to make dist"
+ 	@false
+-endif
+ 
+ dist-hook: dist-check-valac
+ 

package/libsecret/patches/patch-Makefile_am.orig

@@ -0,0 +1,11 @@
+--- libsecret-0.16.orig/Makefile.am	2013-08-26 17:42:16.000000000 +0200
++++ libsecret-0.16/Makefile.am	2013-11-21 12:03:12.000000000 +0100
+@@ -3,7 +3,7 @@ include $(top_srcdir)/Makefile.decl
+ 
+ ACLOCAL_AMFLAGS = -I build/m4 ${ACLOCAL_FLAGS}
+ 
+-SUBDIRS = build egg libsecret tool po docs .
++SUBDIRS = build egg libsecret tool .
+ 
+ DISTCHECK_CONFIGURE_FLAGS = \
+ 	--enable-debug=yes \

package/libsecret/patches/patch-configure_ac

@@ -0,0 +1,44 @@
+--- libsecret-0.16.orig/configure.ac	2013-08-26 17:42:16.000000000 +0200
++++ libsecret-0.16/configure.ac	2013-11-22 18:00:42.000000000 +0100
+@@ -43,7 +43,6 @@ AC_PROG_INSTALL
+ AC_PROG_LN_S
+ AC_PROG_MAKE_SET
+ AM_PROG_LIBTOOL
+-IT_PROG_INTLTOOL([0.35.0])
+ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
+ 
+ GETTEXT_PACKAGE=libsecret
+@@ -66,9 +65,6 @@ PKG_CHECK_MODULES(GLIB,
+ LIBS="$LIBS $GLIB_LIBS"
+ CFLAGS="$CFLAGS $GLIB_CFLAGS"
+ 
+-GTK_DOC_CHECK(1.9)
+-
+-GOBJECT_INTROSPECTION_CHECK([1.29])
+ AC_PATH_PROG(GLIB_MKENUMS, glib-mkenums)
+ 
+ # --------------------------------------------------------------------
+@@ -88,14 +84,6 @@ AM_CONDITIONAL(WITH_MANPAGES, test x$ena
+ # --------------------------------------------------------------------
+ # Vala
+ 
+-VALA_REQUIRED=0.17.2.12
+-
+-VAPIGEN_CHECK($VALA_REQUIRED)
+-
+-if test "$enable_vala" != "no"; then
+-	AC_PATH_PROG([VALAC], [valac], [])
+-fi
+-AM_CONDITIONAL(HAVE_VALAC, test "x$VALAC" != "x")
+ 
+ # --------------------------------------------------------------------
+ # libgcrypt
+@@ -267,8 +255,6 @@ AC_CONFIG_FILES([
+ 	docs/reference/libsecret/version-major.xml
+ 	egg/Makefile
+ 	egg/tests/Makefile
+-	po/Makefile.in
+-	po/Makefile
+ 	libsecret/Makefile
+ 	libsecret/libsecret.pc
+ 	libsecret/libsecret-unstable.pc

package/libsecret/patches/patch-configure_ac.orig

@@ -0,0 +1,35 @@
+--- libsecret-0.16.orig/configure.ac	2013-08-26 17:42:16.000000000 +0200
++++ libsecret-0.16/configure.ac	2013-11-21 15:23:11.000000000 +0100
+@@ -43,7 +43,6 @@ AC_PROG_INSTALL
+ AC_PROG_LN_S
+ AC_PROG_MAKE_SET
+ AM_PROG_LIBTOOL
+-IT_PROG_INTLTOOL([0.35.0])
+ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
+ 
+ GETTEXT_PACKAGE=libsecret
+@@ -66,9 +65,6 @@ PKG_CHECK_MODULES(GLIB,
+ LIBS="$LIBS $GLIB_LIBS"
+ CFLAGS="$CFLAGS $GLIB_CFLAGS"
+ 
+-GTK_DOC_CHECK(1.9)
+-
+-GOBJECT_INTROSPECTION_CHECK([1.29])
+ AC_PATH_PROG(GLIB_MKENUMS, glib-mkenums)
+ 
+ # --------------------------------------------------------------------
+@@ -88,14 +84,6 @@ AM_CONDITIONAL(WITH_MANPAGES, test x$ena
+ # --------------------------------------------------------------------
+ # Vala
+ 
+-VALA_REQUIRED=0.17.2.12
+-
+-VAPIGEN_CHECK($VALA_REQUIRED)
+-
+-if test "$enable_vala" != "no"; then
+-	AC_PATH_PROG([VALAC], [valac], [])
+-fi
+-AM_CONDITIONAL(HAVE_VALAC, test "x$VALAC" != "x")
+ 
+ # --------------------------------------------------------------------
+ # libgcrypt

package/libsecret/patches/patch-docs_reference_libsecret_Makefile_am

@@ -0,0 +1,20 @@
+--- libsecret-0.16.orig/docs/reference/libsecret/Makefile.am	2013-08-26 17:42:16.000000000 +0200
++++ libsecret-0.16/docs/reference/libsecret/Makefile.am	2013-11-21 12:01:48.000000000 +0100
+@@ -92,13 +92,13 @@ GTKDOC_LIBS= $(GLIB_LIBS) $(GOBJECT_LIBS
+ 	$(top_builddir)/libsecret/libsecret-@SECRET_MAJOR@.la
+ 
+ # This includes the standard gtk-doc make rules, copied by gtkdocize.
+-include $(top_srcdir)/gtk-doc.make
++#include $(top_srcdir)/gtk-doc.make
+ 
+ # Other files to distribute
+ # e.g. EXTRA_DIST += version.xml.in
+-EXTRA_DIST += \
+-	version.xml.in \
+-	version-major.xml.in
++#EXTRA_DIST += \
++#	version.xml.in \
++#	version-major.xml.in
+ 
+ # Files not to distribute
+ # for --rebuild-types in $(SCAN_OPTIONS), e.g. $(DOC_MODULE).types

package/libsecret/patches/patch-docs_reference_libsecret_Makefile_am.orig

@@ -0,0 +1,11 @@
+--- libsecret-0.16.orig/docs/reference/libsecret/Makefile.am	2013-08-26 17:42:16.000000000 +0200
++++ libsecret-0.16/docs/reference/libsecret/Makefile.am	2013-11-21 11:59:27.000000000 +0100
+@@ -92,7 +92,7 @@ GTKDOC_LIBS= $(GLIB_LIBS) $(GOBJECT_LIBS
+ 	$(top_builddir)/libsecret/libsecret-@SECRET_MAJOR@.la
+ 
+ # This includes the standard gtk-doc make rules, copied by gtkdocize.
+-include $(top_srcdir)/gtk-doc.make
++#include $(top_srcdir)/gtk-doc.make
+ 
+ # Other files to distribute
+ # e.g. EXTRA_DIST += version.xml.in

package/libsecret/patches/patch-libsecret_Makefile_am

@@ -0,0 +1,95 @@
+--- libsecret-0.16.orig/libsecret/Makefile.am	2013-08-26 17:42:16.000000000 +0200
++++ libsecret-0.16/libsecret/Makefile.am	2013-11-21 12:06:37.000000000 +0100
+@@ -1,6 +1,6 @@
+ include $(top_srcdir)/Makefile.decl
+ 
+-SUBDIRS = . tests
++SUBDIRS = .
+ 
+ AM_CPPFLAGS = \
+ 	-I$(top_srcdir) \
+@@ -107,84 +107,6 @@ secret-enum-types.c: secret-enum-types.c
+ 
+ CLEANFILES =
+ 
+-# ------------------------------------------------------------------
+-# INTROSPECTION
+-
+-if HAVE_INTROSPECTION
+-
+-include $(INTROSPECTION_MAKEFILE)
+-
+-INTROSPECTION_GIRS = Secret-@SECRET_MAJOR@.gir SecretUnstable-0.gir
+-INTROSPECTION_SCANNER_ARGS = $(INTROSPECTION_FLAGS) --warn-all --add-include-path=$(srcdir) --add-include-path=.
+-INTROSPECTION_COMPILER_ARGS = --includedir=$(srcdir) --includedir=.
+-
+-Secret-@SECRET_MAJOR@.gir: libsecret-@SECRET_MAJOR@.la
+-
+-Secret_@SECRET_MAJOR@_gir_NAMESPACE = Secret
+-Secret_@SECRET_MAJOR@_gir_EXPORT_PACKAGES = libsecret-@SECRET_MAJOR@
+-Secret_@SECRET_MAJOR@_gir_INCLUDES = GObject-2.0 Gio-2.0
+-Secret_@SECRET_MAJOR@_gir_LIBS = libsecret-@SECRET_MAJOR@.la
+-Secret_@SECRET_MAJOR@_gir_CFLAGS = -I$(top_srcdir) -I$(top_builddir) -DSECRET_COMPILATION
+-Secret_@SECRET_MAJOR@_gir_FILES = $(STABLE_FILES)
+-Secret_@SECRET_MAJOR@_gir_SCANNERFLAGS = --c-include "libsecret/secret.h"
+-
+-SecretUnstable-0.gir: Secret-@SECRET_MAJOR@.gir
+-
+-SecretUnstable_0_gir_NAMESPACE = SecretUnstable
+-SecretUnstable_0_gir_EXPORT_PACKAGES = libsecret-unstable
+-SecretUnstable_0_gir_INCLUDES = GObject-2.0 Gio-2.0
+-SecretUnstable_0_gir_LIBS = libsecret-@SECRET_MAJOR@.la
+-SecretUnstable_0_gir_CFLAGS = -I$(top_srcdir) -I$(top_builddir) -DSECRET_COMPILATION -DSECRET_API_SUBJECT_TO_CHANGE
+-SecretUnstable_0_gir_FILES = $(UNSTABLE_FILES)
+-SecretUnstable_0_gir_SCANNERFLAGS = --c-include "libsecret/secret.h" --identifier-prefix=Secret --symbol-prefix=secret --include-uninstalled=$(builddir)/Secret-@SECRET_MAJOR@.gir
+-
+-girdir = $(datadir)/gir-1.0
+-gir_DATA = $(INTROSPECTION_GIRS)
+-
+-typelibsdir = $(libdir)/girepository-1.0
+-typelibs_DATA = $(INTROSPECTION_GIRS:.gir=.typelib)
+-
+-if ENABLE_VAPIGEN
+-include $(VAPIGEN_MAKEFILE)
+-
+-libsecret-@SECRET_MAJOR@.vapi: Secret-@SECRET_MAJOR@.gir Secret-@SECRET_MAJOR@.metadata libsecret-@SECRET_MAJOR@.deps
+-
+-libsecret-unstable.vapi: SecretUnstable-0.gir SecretUnstable-0.metadata libsecret-unstable.deps
+-
+-VAPIGEN_VAPIS = \
+-	libsecret-@SECRET_MAJOR@.vapi \
+-	libsecret-unstable.vapi
+-
+-libsecret_@SECRET_MAJOR@_vapi_DEPS = glib-2.0 gio-2.0
+-libsecret_@SECRET_MAJOR@_vapi_METADATADIRS = $(srcdir)
+-libsecret_@SECRET_MAJOR@_vapi_FILES = Secret-@SECRET_MAJOR@.gir
+-
+-libsecret_unstable_vapi_DEPS = gio-2.0 libsecret-@SECRET_MAJOR@
+-libsecret_unstable_vapi_METADATADIRS = $(srcdir)
+-libsecret_unstable_vapi_VAPIDIRS = $(builddir)
+-libsecret_unstable_vapi_GIRDIRS = $(builddir)
+-# ... because _GIRDIRS above is broken, yes, this is ugly
+-libsecret_unstable_vapi_FILES = --girdir=$(builddir)
+-libsecret_unstable_vapi_FILES += SecretUnstable-0.gir
+-
+-VAPI_DEPS = $(VAPIGEN_VAPIS:.vapi=.deps)
+-
+-libsecret-$(SECRET_MAJOR).deps: Makefile.am
+-	$(AM_V_GEN) echo $(libsecret_@SECRET_MAJOR@_vapi_DEPS) | tr ' ' '\n' > $@
+-libsecret-unstable.deps: Makefile.am
+-	$(AM_V_GEN) echo $(libsecret_unstable_vapi_DEPS) | tr ' ' '\n' > $@
+-
+-vapidir = $(datadir)/vala/vapi
+-vapi_DATA = \
+-	$(VAPIGEN_VAPIS) \
+-	$(VAPI_DEPS)
+-
+-CLEANFILES += \
+-	$(VAPIGEN_VAPIS) \
+-	$(VAPI_DEPS)
+-
+-endif # ENABLE_VAPIGEN
+-endif # HAVE_INTROSPECTION
+ 
+ # ------------------------------------------------------------------
+ # PKG CONFIG

package/libsecret/patches/patch-libsecret_tests_Makefile_am

@@ -0,0 +1,113 @@
+--- libsecret-0.16.orig/libsecret/tests/Makefile.am	2013-08-26 17:42:16.000000000 +0200
++++ libsecret-0.16/libsecret/tests/Makefile.am	2013-11-21 15:35:42.000000000 +0100
+@@ -73,59 +73,6 @@ PY_TESTS = \
+ 
+ PY_ENV = $(JS_ENV)
+ 
+-# ------------------------------------------------------------------
+-# VALA
+-
+-VALA_V = $(VALA_V_$(V))
+-VALA_V_ = $(VALA_V_$(AM_DEFAULT_VERBOSITY))
+-VALA_V_0 = @echo "  VALAC " $^;
+-
+-VALA_TESTS = \
+-	test-vala-lang \
+-	test-vala-unstable \
+-	$(NULL)
+-
+-VALA_FLAGS = \
+-	--vapidir=$(builddir)/.. \
+-	--pkg gio-2.0
+-
+-VALA_TESTS_VAPIS = \
+-	$(builddir)/../libsecret-unstable.vapi \
+-	$(builddir)/../libsecret-@SECRET_MAJOR@.vapi \
+-	$(builddir)/mock-service-0.vapi
+-
+-VALA_SRCS = $(VALA_TESTS:=.vala)
+-VALA_C_SRCS = $(VALA_SRCS:.vala=.c)
+-
+-if HAVE_VALAC
+-$(VALA_C_SRCS): %.c: %.vala $(VALA_TESTS_VAPIS)
+-	$(VALA_V)$(VALAC) $(VALA_FLAGS) $(VALA_TESTS_VAPIS) -C $<
+-endif
+-
+-test_vala_lang_CFLAGS = -w
+-test_vala_unstable_CFLAGS = -DSECRET_WITH_UNSTABLE -w
+-
+-nodist_test_vala_lang_SOURCES = test-vala-lang.c
+-nodist_test_vala_unstable_SOURCES = test-vala-unstable.c
+-
+-DISTCLEANFILES = $(VALA_C_SRCS)
+-
+-test-vala: $(VALA_TESTS)
+-	@gtester --verbose -m $(TEST_MODE) --g-fatal-warnings $(VALA_TESTS)
+-
+-VALA_TEST_TARGET =
+-
+-if HAVE_INTROSPECTION
+-if ENABLE_VAPIGEN
+-if HAVE_VALAC
+-
+-VALA_TEST_TARGET += test-vala
+-
+-TEST_PROGS += $(VALA_TESTS)
+-
+-endif # HAVE_VALAC
+-endif # ENABLE_VAPIGEN
+-endif # HAVE_INTROSPECTION
+ 
+ test-c: $(C_TESTS)
+ 	@gtester --verbose -m $(TEST_MODE) --g-fatal-warnings $(C_TESTS)
+@@ -138,50 +85,6 @@ test-py:
+ 
+ test: test-c test-py test-js $(VALA_TEST_TARGET)
+ 
+-# ------------------------------------------------------------------
+-# INTROSPECTION
+-
+-if HAVE_INTROSPECTION
+-
+-include $(INTROSPECTION_MAKEFILE)
+-
+-INTROSPECTION_GIRS = MockService-0.gir
+-INTROSPECTION_SCANNER_ARGS = $(INTROSPECTION_FLAGS) --warn-all --add-include-path=$(srcdir) --add-include-path=.
+-INTROSPECTION_COMPILER_ARGS = --includedir=$(srcdir) --includedir=.
+-
+-MockService-0.gir: libmock_service.la
+-
+-MockService_0_gir_PACKAGES = gobject-2.0 gio-2.0
+-MockService_0_gir_EXPORT_PACKAGES = mock-service-0
+-MockService_0_gir_INCLUDES = GObject-2.0 Gio-2.0
+-MockService_0_gir_LIBS = libmock_service.la
+-MockService_0_gir_CFLAGS = -I$(top_srcdir) -I$(top_builddir) -I$(srcdir)
+-MockService_0_gir_FILES = $(libmock_service_la_SOURCES)
+-MockService_0_gir_SCANNERFLAGS = --c-include "mock-service.h"
+-
+-noinst_DATA = \
+-	$(INTROSPECTION_GIRS) \
+-	$(INTROSPECTION_GIRS:.gir=.typelib)
+-
+-if ENABLE_VAPIGEN
+-include $(VAPIGEN_MAKEFILE)
+-
+-mock-service-0.vapi: MockService-0.gir $(builddir)/../libsecret-@SECRET_MAJOR@.vapi
+-
+-VAPIGEN_VAPIS = mock-service-0.vapi
+-
+-mock_service_0_vapi_DEPS = gio-2.0 libsecret-@SECRET_MAJOR@
+-mock_service_0_vapi_METADATADIRS = $(builddir)
+-mock_service_0_vapi_VAPIDIRS = $(builddir) $(builddir)/..
+-mock_service_0_vapi_FILES = MockService-0.gir
+-
+-vapidir = $(datadir)/vala/vapi
+-vapi_DATA = mock-service-0.vapi
+-
+-noinst_DATA += $(VAPIGEN_VAPIS)
+-
+-endif # ENABLE_VAPIGEN
+-endif # HAVE_INTROSPECTION
+ 
+ #--------------------------------------------------------------------
+ 

package/libsecret/patches/patch-libsecret_tests_Makefile_am.orig

@@ -0,0 +1,72 @@
+--- libsecret-0.16.orig/libsecret/tests/Makefile.am	2013-08-26 17:42:16.000000000 +0200
++++ libsecret-0.16/libsecret/tests/Makefile.am	2013-11-21 12:15:40.000000000 +0100
+@@ -115,18 +115,6 @@ test-vala: $(VALA_TESTS)
+ 
+ VALA_TEST_TARGET =
+ 
+-if HAVE_INTROSPECTION
+-if ENABLE_VAPIGEN
+-if HAVE_VALAC
+-
+-VALA_TEST_TARGET += test-vala
+-
+-TEST_PROGS += $(VALA_TESTS)
+-
+-endif # HAVE_VALAC
+-endif # ENABLE_VAPIGEN
+-endif # HAVE_INTROSPECTION
+-
+ test-c: $(C_TESTS)
+ 	@gtester --verbose -m $(TEST_MODE) --g-fatal-warnings $(C_TESTS)
+ 
+@@ -138,50 +126,6 @@ test-py:
+ 
+ test: test-c test-py test-js $(VALA_TEST_TARGET)
+ 
+-# ------------------------------------------------------------------
+-# INTROSPECTION
+-
+-if HAVE_INTROSPECTION
+-
+-include $(INTROSPECTION_MAKEFILE)
+-
+-INTROSPECTION_GIRS = MockService-0.gir
+-INTROSPECTION_SCANNER_ARGS = $(INTROSPECTION_FLAGS) --warn-all --add-include-path=$(srcdir) --add-include-path=.
+-INTROSPECTION_COMPILER_ARGS = --includedir=$(srcdir) --includedir=.
+-
+-MockService-0.gir: libmock_service.la
+-
+-MockService_0_gir_PACKAGES = gobject-2.0 gio-2.0
+-MockService_0_gir_EXPORT_PACKAGES = mock-service-0
+-MockService_0_gir_INCLUDES = GObject-2.0 Gio-2.0
+-MockService_0_gir_LIBS = libmock_service.la
+-MockService_0_gir_CFLAGS = -I$(top_srcdir) -I$(top_builddir) -I$(srcdir)
+-MockService_0_gir_FILES = $(libmock_service_la_SOURCES)
+-MockService_0_gir_SCANNERFLAGS = --c-include "mock-service.h"
+-
+-noinst_DATA = \
+-	$(INTROSPECTION_GIRS) \
+-	$(INTROSPECTION_GIRS:.gir=.typelib)
+-
+-if ENABLE_VAPIGEN
+-include $(VAPIGEN_MAKEFILE)
+-
+-mock-service-0.vapi: MockService-0.gir $(builddir)/../libsecret-@SECRET_MAJOR@.vapi
+-
+-VAPIGEN_VAPIS = mock-service-0.vapi
+-
+-mock_service_0_vapi_DEPS = gio-2.0 libsecret-@SECRET_MAJOR@
+-mock_service_0_vapi_METADATADIRS = $(builddir)
+-mock_service_0_vapi_VAPIDIRS = $(builddir) $(builddir)/..
+-mock_service_0_vapi_FILES = MockService-0.gir
+-
+-vapidir = $(datadir)/vala/vapi
+-vapi_DATA = mock-service-0.vapi
+-
+-noinst_DATA += $(VAPIGEN_VAPIS)
+-
+-endif # ENABLE_VAPIGEN
+-endif # HAVE_INTROSPECTION
+ 
+ #--------------------------------------------------------------------
+ 

package/libsoup/Makefile

@@ -0,0 +1,31 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		libsoup
+PKG_VERSION:=		2.44.2
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		92aa3667357157e8f3489bcca287f2fa
+PKG_DESCR:=		HTTP client/server library
+PKG_SECTION:=		libs
+PKG_DEPENDS:=		libsqlite
+PKG_BUILDDEP:=		autotool sqlite
+PKG_URL:=		https://wiki.gnome.org/LibSoup
+PKG_SITES:=		http://ftp.gnome.org/pub/GNOME/sources/libsoup/2.44/
+PKG_OPTS:=		dev
+
+DISTFILES:=             ${PKG_NAME}-${PKG_VERSION}.tar.xz
+
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call PKG_template,LIBSOUP,libsoup,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION},${PKG_OPTS}))
+
+AUTOTOOL_STYLE:=	autoreconf
+
+libsoup-install:
+	$(INSTALL_DIR) $(IDIR_LIBSOUP)/usr/lib
+	$(CP) $(WRKINST)/usr/lib/libsoup*.so* \
+		$(IDIR_LIBSOUP)/usr/lib
+
+include ${TOPDIR}/mk/pkg-bottom.mk

package/libsoup/patches/patch-Makefile_am

@@ -0,0 +1,20 @@
+--- libsoup-2.44.2.orig/Makefile.am	2013-11-11 16:02:00.000000000 +0100
++++ libsoup-2.44.2/Makefile.am	2014-04-14 17:24:56.713849496 +0200
+@@ -1,7 +1,7 @@
+ ## Process this file with automake to produce Makefile.in
+ ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
+ 
+-SUBDIRS = libsoup po tests examples docs
++SUBDIRS = libsoup
+ 
+ EXTRA_DIST =				\
+ 	data/effective_tld_names.dat	\
+@@ -12,8 +12,6 @@ EXTRA_DIST =				\
+ 	m4/introspection.m4		\
+ 	Makefile.glib
+ 
+-DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc --enable-introspection
+-
+ pkgconfigdir = $(libdir)/pkgconfig
+ 
+ pkgconfig_DATA = libsoup-2.4.pc

package/libsoup/patches/patch-build-aux_config_guess

@@ -0,0 +1,447 @@
+--- libsoup-2.44.2.orig/build-aux/config.guess	2013-10-18 00:01:48.000000000 +0200
++++ libsoup-2.44.2/build-aux/config.guess	2014-04-14 17:21:42.176934834 +0200
+@@ -1,10 +1,8 @@
+ #! /bin/sh
+ # Attempt to guess a canonical system name.
+-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+-#   2011, 2012, 2013 Free Software Foundation, Inc.
++#   Copyright 1992-2014 Free Software Foundation, Inc.
+ 
+-timestamp='2012-12-29'
++timestamp='2014-01-25'
+ 
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+@@ -26,7 +24,7 @@ timestamp='2012-12-29'
+ # program.  This Exception is an additional permission under section 7
+ # of the GNU General Public License, version 3 ("GPLv3").
+ #
+-# Originally written by Per Bothner. 
++# Originally written by Per Bothner.
+ #
+ # You can get the latest version of this script from:
+ # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+@@ -52,9 +50,7 @@ version="\
+ GNU config.guess ($timestamp)
+ 
+ Originally written by Per Bothner.
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
+-2012, 2013 Free Software Foundation, Inc.
++Copyright 1992-2014 Free Software Foundation, Inc.
+ 
+ This is free software; see the source for copying conditions.  There is NO
+ warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+@@ -136,6 +132,27 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` |
+ UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+ UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+ 
++case "${UNAME_SYSTEM}" in
++Linux|GNU|GNU/*)
++	# If the system lacks a compiler, then just pick glibc.
++	# We could probably try harder.
++	LIBC=gnu
++
++	eval $set_cc_for_build
++	cat <<-EOF > $dummy.c
++	#include <features.h>
++	#if defined(__UCLIBC__)
++	LIBC=uclibc
++	#elif defined(__dietlibc__)
++	LIBC=dietlibc
++	#else
++	LIBC=gnu
++	#endif
++	EOF
++	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
++	;;
++esac
++
+ # Note: order is significant - the case branches are not exclusive.
+ 
+ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+@@ -857,21 +874,21 @@ EOF
+ 	exit ;;
+     *:GNU:*:*)
+ 	# the GNU system
+-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
++	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ 	exit ;;
+     *:GNU/*:*:*)
+ 	# other systems with GNU libc and userland
+-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
++	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+ 	exit ;;
+     i*86:Minix:*:*)
+ 	echo ${UNAME_MACHINE}-pc-minix
+ 	exit ;;
+     aarch64:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     aarch64_be:Linux:*:*)
+ 	UNAME_MACHINE=aarch64_be
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     alpha:Linux:*:*)
+ 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+@@ -884,59 +901,54 @@ EOF
+ 	  EV68*) UNAME_MACHINE=alphaev68 ;;
+ 	esac
+ 	objdump --private-headers /bin/sh | grep -q ld.so.1
+-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
++	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
++	exit ;;
++    arc:Linux:*:* | arceb:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     arm*:Linux:*:*)
+ 	eval $set_cc_for_build
+ 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ 	    | grep -q __ARM_EABI__
+ 	then
+-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
++	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	else
+ 	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ 		| grep -q __ARM_PCS_VFP
+ 	    then
+-		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
++		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+ 	    else
+-		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
++		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+ 	    fi
+ 	fi
+ 	exit ;;
+     avr32*:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     cris:Linux:*:*)
+-	echo ${UNAME_MACHINE}-axis-linux-gnu
++	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ 	exit ;;
+     crisv32:Linux:*:*)
+-	echo ${UNAME_MACHINE}-axis-linux-gnu
++	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ 	exit ;;
+     frv:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     hexagon:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     i*86:Linux:*:*)
+-	LIBC=gnu
+-	eval $set_cc_for_build
+-	sed 's/^	//' << EOF >$dummy.c
+-	#ifdef __dietlibc__
+-	LIBC=dietlibc
+-	#endif
+-EOF
+-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+-	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
++	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+ 	exit ;;
+     ia64:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     m32r*:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     m68*:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     mips:Linux:*:* | mips64:Linux:*:*)
+ 	eval $set_cc_for_build
+@@ -955,54 +967,63 @@ EOF
+ 	#endif
+ EOF
+ 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
++	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+ 	;;
++    or1k:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
++	exit ;;
+     or32:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     padre:Linux:*:*)
+-	echo sparc-unknown-linux-gnu
++	echo sparc-unknown-linux-${LIBC}
+ 	exit ;;
+     parisc64:Linux:*:* | hppa64:Linux:*:*)
+-	echo hppa64-unknown-linux-gnu
++	echo hppa64-unknown-linux-${LIBC}
+ 	exit ;;
+     parisc:Linux:*:* | hppa:Linux:*:*)
+ 	# Look for CPU level
+ 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+-	  *)    echo hppa-unknown-linux-gnu ;;
++	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
++	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
++	  *)    echo hppa-unknown-linux-${LIBC} ;;
+ 	esac
+ 	exit ;;
+     ppc64:Linux:*:*)
+-	echo powerpc64-unknown-linux-gnu
++	echo powerpc64-unknown-linux-${LIBC}
+ 	exit ;;
+     ppc:Linux:*:*)
+-	echo powerpc-unknown-linux-gnu
++	echo powerpc-unknown-linux-${LIBC}
++	exit ;;
++    ppc64le:Linux:*:*)
++	echo powerpc64le-unknown-linux-${LIBC}
++	exit ;;
++    ppcle:Linux:*:*)
++	echo powerpcle-unknown-linux-${LIBC}
+ 	exit ;;
+     s390:Linux:*:* | s390x:Linux:*:*)
+-	echo ${UNAME_MACHINE}-ibm-linux
++	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+ 	exit ;;
+     sh64*:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     sh*:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     sparc:Linux:*:* | sparc64:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     tile*:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     vax:Linux:*:*)
+-	echo ${UNAME_MACHINE}-dec-linux-gnu
++	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+ 	exit ;;
+     x86_64:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     xtensa*:Linux:*:*)
+-	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ 	exit ;;
+     i*86:DYNIX/ptx:4*:*)
+ 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+@@ -1235,19 +1256,31 @@ EOF
+ 	exit ;;
+     *:Darwin:*:*)
+ 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+-	case $UNAME_PROCESSOR in
+-	    i386)
+-		eval $set_cc_for_build
+-		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+-		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+-		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+-		      grep IS_64BIT_ARCH >/dev/null
+-		  then
+-		      UNAME_PROCESSOR="x86_64"
+-		  fi
+-		fi ;;
+-	    unknown) UNAME_PROCESSOR=powerpc ;;
+-	esac
++	eval $set_cc_for_build
++	if test "$UNAME_PROCESSOR" = unknown ; then
++	    UNAME_PROCESSOR=powerpc
++	fi
++	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
++	    if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
++		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
++		    (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
++		    grep IS_64BIT_ARCH >/dev/null
++		then
++		    case $UNAME_PROCESSOR in
++			i386) UNAME_PROCESSOR=x86_64 ;;
++			powerpc) UNAME_PROCESSOR=powerpc64 ;;
++		    esac
++		fi
++	    fi
++	elif test "$UNAME_PROCESSOR" = i386 ; then
++	    # Avoid executing cc on OS X 10.9, as it ships with a stub
++	    # that puts up a graphical alert prompting to install
++	    # developer tools.  Any system running Mac OS X 10.7 or
++	    # later (Darwin 11 and later) is required to have a 64-bit
++	    # processor. This is not true of the ARM version of Darwin
++	    # that Apple uses in portable devices.
++	    UNAME_PROCESSOR=x86_64
++	fi
+ 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ 	exit ;;
+     *:procnto*:*:* | *:QNX:[0123456789]*:*)
+@@ -1338,154 +1371,6 @@ EOF
+ 	exit ;;
+ esac
+ 
+-eval $set_cc_for_build
+-cat >$dummy.c <<EOF
+-#ifdef _SEQUENT_
+-# include <sys/types.h>
+-# include <sys/utsname.h>
+-#endif
+-main ()
+-{
+-#if defined (sony)
+-#if defined (MIPSEB)
+-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+-     I don't know....  */
+-  printf ("mips-sony-bsd\n"); exit (0);
+-#else
+-#include <sys/param.h>
+-  printf ("m68k-sony-newsos%s\n",
+-#ifdef NEWSOS4
+-	"4"
+-#else
+-	""
+-#endif
+-	); exit (0);
+-#endif
+-#endif
+-
+-#if defined (__arm) && defined (__acorn) && defined (__unix)
+-  printf ("arm-acorn-riscix\n"); exit (0);
+-#endif
+-
+-#if defined (hp300) && !defined (hpux)
+-  printf ("m68k-hp-bsd\n"); exit (0);
+-#endif
+-
+-#if defined (NeXT)
+-#if !defined (__ARCHITECTURE__)
+-#define __ARCHITECTURE__ "m68k"
+-#endif
+-  int version;
+-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+-  if (version < 4)
+-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+-  else
+-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+-  exit (0);
+-#endif
+-
+-#if defined (MULTIMAX) || defined (n16)
+-#if defined (UMAXV)
+-  printf ("ns32k-encore-sysv\n"); exit (0);
+-#else
+-#if defined (CMU)
+-  printf ("ns32k-encore-mach\n"); exit (0);
+-#else
+-  printf ("ns32k-encore-bsd\n"); exit (0);
+-#endif
+-#endif
+-#endif
+-
+-#if defined (__386BSD__)
+-  printf ("i386-pc-bsd\n"); exit (0);
+-#endif
+-
+-#if defined (sequent)
+-#if defined (i386)
+-  printf ("i386-sequent-dynix\n"); exit (0);
+-#endif
+-#if defined (ns32000)
+-  printf ("ns32k-sequent-dynix\n"); exit (0);
+-#endif
+-#endif
+-
+-#if defined (_SEQUENT_)
+-    struct utsname un;
+-
+-    uname(&un);
+-
+-    if (strncmp(un.version, "V2", 2) == 0) {
+-	printf ("i386-sequent-ptx2\n"); exit (0);
+-    }
+-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+-	printf ("i386-sequent-ptx1\n"); exit (0);
+-    }
+-    printf ("i386-sequent-ptx\n"); exit (0);
+-
+-#endif
+-
+-#if defined (vax)
+-# if !defined (ultrix)
+-#  include <sys/param.h>
+-#  if defined (BSD)
+-#   if BSD == 43
+-      printf ("vax-dec-bsd4.3\n"); exit (0);
+-#   else
+-#    if BSD == 199006
+-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+-#    else
+-      printf ("vax-dec-bsd\n"); exit (0);
+-#    endif
+-#   endif
+-#  else
+-    printf ("vax-dec-bsd\n"); exit (0);
+-#  endif
+-# else
+-    printf ("vax-dec-ultrix\n"); exit (0);
+-# endif
+-#endif
+-
+-#if defined (alliant) && defined (i860)
+-  printf ("i860-alliant-bsd\n"); exit (0);
+-#endif
+-
+-  exit (1);
+-}
+-EOF
+-
+-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+-	{ echo "$SYSTEM_NAME"; exit; }
+-
+-# Apollos put the system type in the environment.
+-
+-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+-
+-# Convex versions that predate uname can use getsysinfo(1)
+-
+-if [ -x /usr/convex/getsysinfo ]
+-then
+-    case `getsysinfo -f cpu_type` in
+-    c1*)
+-	echo c1-convex-bsd
+-	exit ;;
+-    c2*)
+-	if getsysinfo -f scalar_acc
+-	then echo c32-convex-bsd
+-	else echo c2-convex-bsd
+-	fi
+-	exit ;;
+-    c34*)
+-	echo c34-convex-bsd
+-	exit ;;
+-    c38*)
+-	echo c38-convex-bsd
+-	exit ;;
+-    c4*)
+-	echo c4-convex-bsd
+-	exit ;;
+-    esac
+-fi
+-
+ cat >&2 <<EOF
+ $0: unable to guess system type
+ 

package/libsoup/patches/patch-build-aux_config_sub

@@ -0,0 +1,183 @@
+--- libsoup-2.44.2.orig/build-aux/config.sub	2013-10-18 00:01:48.000000000 +0200
++++ libsoup-2.44.2/build-aux/config.sub	2014-04-14 17:21:42.176934834 +0200
+@@ -1,10 +1,8 @@
+ #! /bin/sh
+ # Configuration validation subroutine script.
+-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+-#   2011, 2012, 2013 Free Software Foundation, Inc.
++#   Copyright 1992-2014 Free Software Foundation, Inc.
+ 
+-timestamp='2012-12-29'
++timestamp='2014-01-01'
+ 
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+@@ -70,9 +68,7 @@ Report bugs and patches to <config-patch
+ version="\
+ GNU config.sub ($timestamp)
+ 
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
+-2012, 2013 Free Software Foundation, Inc.
++Copyright 1992-2014 Free Software Foundation, Inc.
+ 
+ This is free software; see the source for copying conditions.  There is NO
+ warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+@@ -256,12 +252,12 @@ case $basic_machine in
+ 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ 	| am33_2.0 \
+-	| arc \
++	| arc | arceb \
+ 	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+ 	| avr | avr32 \
+ 	| be32 | be64 \
+ 	| bfin \
+-	| c4x | clipper \
++	| c4x | c8051 | clipper \
+ 	| d10v | d30v | dlx | dsp16xx \
+ 	| epiphany \
+ 	| fido | fr30 | frv \
+@@ -269,6 +265,7 @@ case $basic_machine in
+ 	| hexagon \
+ 	| i370 | i860 | i960 | ia64 \
+ 	| ip2k | iq2000 \
++	| k1om \
+ 	| le32 | le64 \
+ 	| lm32 \
+ 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+@@ -290,16 +287,17 @@ case $basic_machine in
+ 	| mipsisa64r2 | mipsisa64r2el \
+ 	| mipsisa64sb1 | mipsisa64sb1el \
+ 	| mipsisa64sr71k | mipsisa64sr71kel \
++	| mipsr5900 | mipsr5900el \
+ 	| mipstx39 | mipstx39el \
+ 	| mn10200 | mn10300 \
+ 	| moxie \
+ 	| mt \
+ 	| msp430 \
+ 	| nds32 | nds32le | nds32be \
+-	| nios | nios2 \
++	| nios | nios2 | nios2eb | nios2el \
+ 	| ns16k | ns32k \
+ 	| open8 \
+-	| or32 \
++	| or1k | or32 \
+ 	| pdp10 | pdp11 | pj | pjl \
+ 	| powerpc | powerpc64 | powerpc64le | powerpcle \
+ 	| pyramid \
+@@ -327,7 +325,7 @@ case $basic_machine in
+ 	c6x)
+ 		basic_machine=tic6x-unknown
+ 		;;
+-	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
++	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+ 		basic_machine=$basic_machine-unknown
+ 		os=-none
+ 		;;
+@@ -369,13 +367,13 @@ case $basic_machine in
+ 	| aarch64-* | aarch64_be-* \
+ 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
++	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+ 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+ 	| avr-* | avr32-* \
+ 	| be32-* | be64-* \
+ 	| bfin-* | bs2000-* \
+ 	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+-	| clipper-* | craynv-* | cydra-* \
++	| c8051-* | clipper-* | craynv-* | cydra-* \
+ 	| d10v-* | d30v-* | dlx-* \
+ 	| elxsi-* \
+ 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+@@ -384,6 +382,7 @@ case $basic_machine in
+ 	| hexagon-* \
+ 	| i*86-* | i860-* | i960-* | ia64-* \
+ 	| ip2k-* | iq2000-* \
++	| k1om-* \
+ 	| le32-* | le64-* \
+ 	| lm32-* \
+ 	| m32c-* | m32r-* | m32rle-* \
+@@ -407,12 +406,13 @@ case $basic_machine in
+ 	| mipsisa64r2-* | mipsisa64r2el-* \
+ 	| mipsisa64sb1-* | mipsisa64sb1el-* \
+ 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
++	| mipsr5900-* | mipsr5900el-* \
+ 	| mipstx39-* | mipstx39el-* \
+ 	| mmix-* \
+ 	| mt-* \
+ 	| msp430-* \
+ 	| nds32-* | nds32le-* | nds32be-* \
+-	| nios-* | nios2-* \
++	| nios-* | nios2-* | nios2eb-* | nios2el-* \
+ 	| none-* | np1-* | ns16k-* | ns32k-* \
+ 	| open8-* \
+ 	| orion-* \
+@@ -796,7 +796,7 @@ case $basic_machine in
+ 		os=-mingw64
+ 		;;
+ 	mingw32)
+-		basic_machine=i386-pc
++		basic_machine=i686-pc
+ 		os=-mingw32
+ 		;;
+ 	mingw32ce)
+@@ -832,7 +832,7 @@ case $basic_machine in
+ 		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ 		;;
+ 	msys)
+-		basic_machine=i386-pc
++		basic_machine=i686-pc
+ 		os=-msys
+ 		;;
+ 	mvs)
+@@ -1008,7 +1008,7 @@ case $basic_machine in
+ 		;;
+ 	ppc64)	basic_machine=powerpc64-unknown
+ 		;;
+-	ppc64-* | ppc64p7-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
++	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ 		;;
+ 	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ 		basic_machine=powerpc64le-unknown
+@@ -1354,7 +1354,7 @@ case $os in
+ 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+-	      | -sym* | -kopensolaris* \
++	      | -sym* | -kopensolaris* | -plan9* \
+ 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ 	      | -aos* | -aros* \
+ 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+@@ -1500,9 +1500,6 @@ case $os in
+ 	-aros*)
+ 		os=-aros
+ 		;;
+-	-kaos*)
+-		os=-kaos
+-		;;
+ 	-zvmoe)
+ 		os=-zvmoe
+ 		;;
+@@ -1551,6 +1548,9 @@ case $basic_machine in
+ 	c4x-* | tic4x-*)
+ 		os=-coff
+ 		;;
++	c8051-*)
++		os=-elf
++		;;
+ 	hexagon-*)
+ 		os=-elf
+ 		;;
+@@ -1594,6 +1594,9 @@ case $basic_machine in
+ 	mips*-*)
+ 		os=-elf
+ 		;;
++	or1k-*)
++		os=-elf
++		;;
+ 	or32-*)
+ 		os=-coff
+ 		;;

package/libsoup/patches/patch-build-aux_depcomp

@@ -0,0 +1,682 @@
+--- libsoup-2.44.2.orig/build-aux/depcomp	2013-10-18 00:01:49.000000000 +0200
++++ libsoup-2.44.2/build-aux/depcomp	2014-04-14 17:21:42.708937363 +0200
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # depcomp - compile a program generating dependencies as side-effects
+ 
+-scriptversion=2013-05-30.07; # UTC
++scriptversion=2012-03-27.16; # UTC
+ 
+-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
++# Copyright (C) 1999-2012 Free Software Foundation, Inc.
+ 
+ # This program is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+@@ -27,9 +27,9 @@ scriptversion=2013-05-30.07; # UTC
+ 
+ case $1 in
+   '')
+-    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+-    exit 1;
+-    ;;
++     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
++     exit 1;
++     ;;
+   -h | --h*)
+     cat <<\EOF
+ Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+@@ -56,65 +56,11 @@ EOF
+     ;;
+ esac
+ 
+-# Get the directory component of the given path, and save it in the
+-# global variables '$dir'.  Note that this directory component will
+-# be either empty or ending with a '/' character.  This is deliberate.
+-set_dir_from ()
+-{
+-  case $1 in
+-    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+-      *) dir=;;
+-  esac
+-}
+-
+-# Get the suffix-stripped basename of the given path, and save it the
+-# global variable '$base'.
+-set_base_from ()
+-{
+-  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+-}
+-
+-# If no dependency file was actually created by the compiler invocation,
+-# we still have to create a dummy depfile, to avoid errors with the
+-# Makefile "include basename.Plo" scheme.
+-make_dummy_depfile ()
+-{
+-  echo "#dummy" > "$depfile"
+-}
+-
+-# Factor out some common post-processing of the generated depfile.
+-# Requires the auxiliary global variable '$tmpdepfile' to be set.
+-aix_post_process_depfile ()
+-{
+-  # If the compiler actually managed to produce a dependency file,
+-  # post-process it.
+-  if test -f "$tmpdepfile"; then
+-    # Each line is of the form 'foo.o: dependency.h'.
+-    # Do two passes, one to just change these to
+-    #   $object: dependency.h
+-    # and one to simply output
+-    #   dependency.h:
+-    # which is needed to avoid the deleted-header problem.
+-    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+-      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+-    } > "$depfile"
+-    rm -f "$tmpdepfile"
+-  else
+-    make_dummy_depfile
+-  fi
+-}
+-
+ # A tabulation character.
+ tab='	'
+ # A newline character.
+ nl='
+ '
+-# Character ranges might be problematic outside the C locale.
+-# These definitions help.
+-upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+-lower=abcdefghijklmnopqrstuvwxyz
+-digits=0123456789
+-alpha=${upper}${lower}
+ 
+ if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+   echo "depcomp: Variables source, object and depmode must be set" 1>&2
+@@ -128,9 +74,6 @@ tmpdepfile=${tmpdepfile-`echo "$depfile"
+ 
+ rm -f "$tmpdepfile"
+ 
+-# Avoid interferences from the environment.
+-gccflag= dashmflag=
+-
+ # Some modes work just like other modes, but use different flags.  We
+ # parameterize here, but still list the modes in the big case below,
+ # to make depend.m4 easier to write.  Note that we *cannot* use a case
+@@ -142,32 +85,32 @@ if test "$depmode" = hp; then
+ fi
+ 
+ if test "$depmode" = dashXmstdout; then
+-  # This is just like dashmstdout with a different argument.
+-  dashmflag=-xM
+-  depmode=dashmstdout
++   # This is just like dashmstdout with a different argument.
++   dashmflag=-xM
++   depmode=dashmstdout
+ fi
+ 
+ cygpath_u="cygpath -u -f -"
+ if test "$depmode" = msvcmsys; then
+-  # This is just like msvisualcpp but w/o cygpath translation.
+-  # Just convert the backslash-escaped backslashes to single forward
+-  # slashes to satisfy depend.m4
+-  cygpath_u='sed s,\\\\,/,g'
+-  depmode=msvisualcpp
++   # This is just like msvisualcpp but w/o cygpath translation.
++   # Just convert the backslash-escaped backslashes to single forward
++   # slashes to satisfy depend.m4
++   cygpath_u='sed s,\\\\,/,g'
++   depmode=msvisualcpp
+ fi
+ 
+ if test "$depmode" = msvc7msys; then
+-  # This is just like msvc7 but w/o cygpath translation.
+-  # Just convert the backslash-escaped backslashes to single forward
+-  # slashes to satisfy depend.m4
+-  cygpath_u='sed s,\\\\,/,g'
+-  depmode=msvc7
++   # This is just like msvc7 but w/o cygpath translation.
++   # Just convert the backslash-escaped backslashes to single forward
++   # slashes to satisfy depend.m4
++   cygpath_u='sed s,\\\\,/,g'
++   depmode=msvc7
+ fi
+ 
+ if test "$depmode" = xlc; then
+-  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+-  gccflag=-qmakedep=gcc,-MF
+-  depmode=gcc
++   # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
++   gccflag=-qmakedep=gcc,-MF
++   depmode=gcc
+ fi
+ 
+ case "$depmode" in
+@@ -190,7 +133,8 @@ gcc3)
+   done
+   "$@"
+   stat=$?
+-  if test $stat -ne 0; then
++  if test $stat -eq 0; then :
++  else
+     rm -f "$tmpdepfile"
+     exit $stat
+   fi
+@@ -198,17 +142,13 @@ gcc3)
+   ;;
+ 
+ gcc)
+-## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+-## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+-## (see the conditional assignment to $gccflag above).
+ ## There are various ways to get dependency output from gcc.  Here's
+ ## why we pick this rather obscure method:
+ ## - Don't want to use -MD because we'd like the dependencies to end
+ ##   up in a subdir.  Having to rename by hand is ugly.
+ ##   (We might end up doing this anyway to support other compilers.)
+ ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+-##   -MM, not -M (despite what the docs say).  Also, it might not be
+-##   supported by the other compilers which use the 'gcc' depmode.
++##   -MM, not -M (despite what the docs say).
+ ## - Using -M directly means running the compiler twice (even worse
+ ##   than renaming).
+   if test -z "$gccflag"; then
+@@ -216,14 +156,15 @@ gcc)
+   fi
+   "$@" -Wp,"$gccflag$tmpdepfile"
+   stat=$?
+-  if test $stat -ne 0; then
++  if test $stat -eq 0; then :
++  else
+     rm -f "$tmpdepfile"
+     exit $stat
+   fi
+   rm -f "$depfile"
+   echo "$object : \\" > "$depfile"
+-  # The second -e expression handles DOS-style file names with drive
+-  # letters.
++  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
++## The second -e expression handles DOS-style file names with drive letters.
+   sed -e 's/^[^:]*: / /' \
+       -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+ ## This next piece of magic avoids the "deleted header file" problem.
+@@ -232,15 +173,15 @@ gcc)
+ ## typically no way to rebuild the header).  We avoid this by adding
+ ## dummy dependencies for each header file.  Too bad gcc doesn't do
+ ## this for us directly.
++  tr ' ' "$nl" < "$tmpdepfile" |
+ ## Some versions of gcc put a space before the ':'.  On the theory
+ ## that the space means something, we add a space to the output as
+ ## well.  hp depmode also adds that space, but also prefixes the VPATH
+ ## to the object.  Take care to not repeat it in the output.
+ ## Some versions of the HPUX 10.20 sed can't process this invocation
+ ## correctly.  Breaking it into two sed invocations is a workaround.
+-  tr ' ' "$nl" < "$tmpdepfile" \
+-    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+-    | sed -e 's/$/ :/' >> "$depfile"
++    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
++      | sed -e 's/$/ :/' >> "$depfile"
+   rm -f "$tmpdepfile"
+   ;;
+ 
+@@ -258,7 +199,8 @@ sgi)
+     "$@" -MDupdate "$tmpdepfile"
+   fi
+   stat=$?
+-  if test $stat -ne 0; then
++  if test $stat -eq 0; then :
++  else
+     rm -f "$tmpdepfile"
+     exit $stat
+   fi
+@@ -266,6 +208,7 @@ sgi)
+ 
+   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+     echo "$object : \\" > "$depfile"
++
+     # Clip off the initial element (the dependent).  Don't try to be
+     # clever and replace this with sed code, as IRIX sed won't handle
+     # lines with more than a fixed number of characters (4096 in
+@@ -273,15 +216,19 @@ sgi)
+     # the IRIX cc adds comments like '#:fec' to the end of the
+     # dependency line.
+     tr ' ' "$nl" < "$tmpdepfile" \
+-      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+-      | tr "$nl" ' ' >> "$depfile"
++    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
++    tr "$nl" ' ' >> "$depfile"
+     echo >> "$depfile"
++
+     # The second pass generates a dummy entry for each header file.
+     tr ' ' "$nl" < "$tmpdepfile" \
+-      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+-      >> "$depfile"
++   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
++   >> "$depfile"
+   else
+-    make_dummy_depfile
++    # The sourcefile does not contain any dependencies, so just
++    # store a dummy comment line, to avoid errors with the Makefile
++    # "include basename.Plo" scheme.
++    echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+@@ -299,8 +246,9 @@ aix)
+   # current directory.  Also, the AIX compiler puts '$object:' at the
+   # start of each line; $object doesn't have directory information.
+   # Version 6 uses the directory in both cases.
+-  set_dir_from "$object"
+-  set_base_from "$object"
++  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
++  test "x$dir" = "x$object" && dir=
++  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+   if test "$libtool" = yes; then
+     tmpdepfile1=$dir$base.u
+     tmpdepfile2=$base.u
+@@ -313,7 +261,9 @@ aix)
+     "$@" -M
+   fi
+   stat=$?
+-  if test $stat -ne 0; then
++
++  if test $stat -eq 0; then :
++  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+     exit $stat
+   fi
+@@ -322,113 +272,65 @@ aix)
+   do
+     test -f "$tmpdepfile" && break
+   done
+-  aix_post_process_depfile
+-  ;;
+-
+-tcc)
+-  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+-  # FIXME: That version still under development at the moment of writing.
+-  #        Make that this statement remains true also for stable, released
+-  #        versions.
+-  # It will wrap lines (doesn't matter whether long or short) with a
+-  # trailing '\', as in:
+-  #
+-  #   foo.o : \
+-  #    foo.c \
+-  #    foo.h \
+-  #
+-  # It will put a trailing '\' even on the last line, and will use leading
+-  # spaces rather than leading tabs (at least since its commit 0394caf7
+-  # "Emit spaces for -MD").
+-  "$@" -MD -MF "$tmpdepfile"
+-  stat=$?
+-  if test $stat -ne 0; then
+-    rm -f "$tmpdepfile"
+-    exit $stat
++  if test -f "$tmpdepfile"; then
++    # Each line is of the form 'foo.o: dependent.h'.
++    # Do two passes, one to just change these to
++    # '$object: dependent.h' and one to simply 'dependent.h:'.
++    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
++    sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
++  else
++    # The sourcefile does not contain any dependencies, so just
++    # store a dummy comment line, to avoid errors with the Makefile
++    # "include basename.Plo" scheme.
++    echo "#dummy" > "$depfile"
+   fi
+-  rm -f "$depfile"
+-  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+-  # We have to change lines of the first kind to '$object: \'.
+-  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+-  # And for each line of the second kind, we have to emit a 'dep.h:'
+-  # dummy dependency, to avoid the deleted-header problem.
+-  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+   rm -f "$tmpdepfile"
+   ;;
+ 
+-## The order of this option in the case statement is important, since the
+-## shell code in configure will try each of these formats in the order
+-## listed in this file.  A plain '-MD' option would be understood by many
+-## compilers, so we must ensure this comes after the gcc and icc options.
+-pgcc)
+-  # Portland's C compiler understands '-MD'.
+-  # Will always output deps to 'file.d' where file is the root name of the
+-  # source file under compilation, even if file resides in a subdirectory.
+-  # The object file name does not affect the name of the '.d' file.
+-  # pgcc 10.2 will output
++icc)
++  # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
++  # However on
++  #    $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
++  # ICC 7.0 will fill foo.d with something like
++  #    foo.o: sub/foo.c
++  #    foo.o: sub/foo.h
++  # which is wrong.  We want
++  #    sub/foo.o: sub/foo.c
++  #    sub/foo.o: sub/foo.h
++  #    sub/foo.c:
++  #    sub/foo.h:
++  # ICC 7.1 will output
+   #    foo.o: sub/foo.c sub/foo.h
+-  # and will wrap long lines using '\' :
++  # and will wrap long lines using '\':
+   #    foo.o: sub/foo.c ... \
+   #     sub/foo.h ... \
+   #     ...
+-  set_dir_from "$object"
+-  # Use the source, not the object, to determine the base name, since
+-  # that's sadly what pgcc will do too.
+-  set_base_from "$source"
+-  tmpdepfile=$base.d
+-
+-  # For projects that build the same source file twice into different object
+-  # files, the pgcc approach of using the *source* file root name can cause
+-  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+-  # the same $tmpdepfile.
+-  lockdir=$base.d-lock
+-  trap "
+-    echo '$0: caught signal, cleaning up...' >&2
+-    rmdir '$lockdir'
+-    exit 1
+-  " 1 2 13 15
+-  numtries=100
+-  i=$numtries
+-  while test $i -gt 0; do
+-    # mkdir is a portable test-and-set.
+-    if mkdir "$lockdir" 2>/dev/null; then
+-      # This process acquired the lock.
+-      "$@" -MD
+-      stat=$?
+-      # Release the lock.
+-      rmdir "$lockdir"
+-      break
+-    else
+-      # If the lock is being held by a different process, wait
+-      # until the winning process is done or we timeout.
+-      while test -d "$lockdir" && test $i -gt 0; do
+-        sleep 1
+-        i=`expr $i - 1`
+-      done
+-    fi
+-    i=`expr $i - 1`
+-  done
+-  trap - 1 2 13 15
+-  if test $i -le 0; then
+-    echo "$0: failed to acquire lock after $numtries attempts" >&2
+-    echo "$0: check lockdir '$lockdir'" >&2
+-    exit 1
+-  fi
+-
+-  if test $stat -ne 0; then
++  # tcc 0.9.26 (FIXME still under development at the moment of writing)
++  # will emit a similar output, but also prepend the continuation lines
++  # with horizontal tabulation characters.
++  "$@" -MD -MF "$tmpdepfile"
++  stat=$?
++  if test $stat -eq 0; then :
++  else
+     rm -f "$tmpdepfile"
+     exit $stat
+   fi
+   rm -f "$depfile"
+-  # Each line is of the form `foo.o: dependent.h',
+-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
++  # Each line is of the form 'foo.o: dependent.h',
++  # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+   # Do two passes, one to just change these to
+-  # `$object: dependent.h' and one to simply `dependent.h:'.
+-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+-  # Some versions of the HPUX 10.20 sed can't process this invocation
+-  # correctly.  Breaking it into two sed invocations is a workaround.
+-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+-    | sed -e 's/$/ :/' >> "$depfile"
++  # '$object: dependent.h' and one to simply 'dependent.h:'.
++  sed -e "s/^[ $tab][ $tab]*/  /" -e "s,^[^:]*:,$object :," \
++    < "$tmpdepfile" > "$depfile"
++  sed '
++    s/[ '"$tab"'][ '"$tab"']*/ /g
++    s/^ *//
++    s/ *\\*$//
++    s/^[^:]*: *//
++    /^$/d
++    /:$/d
++    s/$/ :/
++  ' < "$tmpdepfile" >> "$depfile"
+   rm -f "$tmpdepfile"
+   ;;
+ 
+@@ -439,8 +341,9 @@ hp2)
+   # 'foo.d', which lands next to the object file, wherever that
+   # happens to be.
+   # Much of this is similar to the tru64 case; see comments there.
+-  set_dir_from  "$object"
+-  set_base_from "$object"
++  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
++  test "x$dir" = "x$object" && dir=
++  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+   if test "$libtool" = yes; then
+     tmpdepfile1=$dir$base.d
+     tmpdepfile2=$dir.libs/$base.d
+@@ -451,7 +354,8 @@ hp2)
+     "$@" +Maked
+   fi
+   stat=$?
+-  if test $stat -ne 0; then
++  if test $stat -eq 0; then :
++  else
+      rm -f "$tmpdepfile1" "$tmpdepfile2"
+      exit $stat
+   fi
+@@ -461,61 +365,76 @@ hp2)
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+-    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
++    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+     # Add 'dependent.h:' lines.
+     sed -ne '2,${
+-               s/^ *//
+-               s/ \\*$//
+-               s/$/:/
+-               p
+-             }' "$tmpdepfile" >> "$depfile"
++	       s/^ *//
++	       s/ \\*$//
++	       s/$/:/
++	       p
++	     }' "$tmpdepfile" >> "$depfile"
+   else
+-    make_dummy_depfile
++    echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile" "$tmpdepfile2"
+   ;;
+ 
+ tru64)
+-  # The Tru64 compiler uses -MD to generate dependencies as a side
+-  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+-  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+-  # dependencies in 'foo.d' instead, so we check for that too.
+-  # Subdirectories are respected.
+-  set_dir_from  "$object"
+-  set_base_from "$object"
++   # The Tru64 compiler uses -MD to generate dependencies as a side
++   # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
++   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
++   # dependencies in 'foo.d' instead, so we check for that too.
++   # Subdirectories are respected.
++   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
++   test "x$dir" = "x$object" && dir=
++   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ 
+-  if test "$libtool" = yes; then
+-    # Libtool generates 2 separate objects for the 2 libraries.  These
+-    # two compilations output dependencies in $dir.libs/$base.o.d and
+-    # in $dir$base.o.d.  We have to check for both files, because
+-    # one of the two compilations can be disabled.  We should prefer
+-    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+-    # automatically cleaned when .libs/ is deleted, while ignoring
+-    # the former would cause a distcleancheck panic.
+-    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+-    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+-    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+-    "$@" -Wc,-MD
+-  else
+-    tmpdepfile1=$dir$base.d
+-    tmpdepfile2=$dir$base.d
+-    tmpdepfile3=$dir$base.d
+-    "$@" -MD
+-  fi
++   if test "$libtool" = yes; then
++      # With Tru64 cc, shared objects can also be used to make a
++      # static library.  This mechanism is used in libtool 1.4 series to
++      # handle both shared and static libraries in a single compilation.
++      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
++      #
++      # With libtool 1.5 this exception was removed, and libtool now
++      # generates 2 separate objects for the 2 libraries.  These two
++      # compilations output dependencies in $dir.libs/$base.o.d and
++      # in $dir$base.o.d.  We have to check for both files, because
++      # one of the two compilations can be disabled.  We should prefer
++      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
++      # automatically cleaned when .libs/ is deleted, while ignoring
++      # the former would cause a distcleancheck panic.
++      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
++      tmpdepfile2=$dir$base.o.d          # libtool 1.5
++      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
++      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
++      "$@" -Wc,-MD
++   else
++      tmpdepfile1=$dir$base.o.d
++      tmpdepfile2=$dir$base.d
++      tmpdepfile3=$dir$base.d
++      tmpdepfile4=$dir$base.d
++      "$@" -MD
++   fi
+ 
+-  stat=$?
+-  if test $stat -ne 0; then
+-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+-    exit $stat
+-  fi
++   stat=$?
++   if test $stat -eq 0; then :
++   else
++      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
++      exit $stat
++   fi
+ 
+-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+-  do
+-    test -f "$tmpdepfile" && break
+-  done
+-  # Same post-processing that is required for AIX mode.
+-  aix_post_process_depfile
+-  ;;
++   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
++   do
++     test -f "$tmpdepfile" && break
++   done
++   if test -f "$tmpdepfile"; then
++      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
++      sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
++   else
++      echo "#dummy" > "$depfile"
++   fi
++   rm -f "$tmpdepfile"
++   ;;
+ 
+ msvc7)
+   if test "$libtool" = yes; then
+@@ -526,7 +445,8 @@ msvc7)
+   "$@" $showIncludes > "$tmpdepfile"
+   stat=$?
+   grep -v '^Note: including file: ' "$tmpdepfile"
+-  if test $stat -ne 0; then
++  if test "$stat" = 0; then :
++  else
+     rm -f "$tmpdepfile"
+     exit $stat
+   fi
+@@ -552,7 +472,6 @@ $ {
+   G
+   p
+ }' >> "$depfile"
+-  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+   rm -f "$tmpdepfile"
+   ;;
+ 
+@@ -604,14 +523,13 @@ dashmstdout)
+   # in the target name.  This is to cope with DOS-style filenames:
+   # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+   "$@" $dashmflag |
+-    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
++    sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+   rm -f "$depfile"
+   cat < "$tmpdepfile" > "$depfile"
+-  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+-  # correctly.  Breaking it into two sed invocations is a workaround.
+-  tr ' ' "$nl" < "$tmpdepfile" \
+-    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+-    | sed -e 's/$/ :/' >> "$depfile"
++  tr ' ' "$nl" < "$tmpdepfile" | \
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly.  Breaking it into two sed invocations is a workaround.
++    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+   rm -f "$tmpdepfile"
+   ;;
+ 
+@@ -664,12 +582,10 @@ makedepend)
+   # makedepend may prepend the VPATH from the source file name to the object.
+   # No need to regex-escape $object, excess matching of '.' is harmless.
+   sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+-  # Some versions of the HPUX 10.20 sed can't process the last invocation
+-  # correctly.  Breaking it into two sed invocations is a workaround.
+-  sed '1,2d' "$tmpdepfile" \
+-    | tr ' ' "$nl" \
+-    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+-    | sed -e 's/$/ :/' >> "$depfile"
++  sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly.  Breaking it into two sed invocations is a workaround.
++    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+   rm -f "$tmpdepfile" "$tmpdepfile".bak
+   ;;
+ 
+@@ -705,10 +621,10 @@ cpp)
+     esac
+   done
+ 
+-  "$@" -E \
+-    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+-             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+-    | sed '$ s: \\$::' > "$tmpdepfile"
++  "$@" -E |
++    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
++       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
++    sed '$ s: \\$::' > "$tmpdepfile"
+   rm -f "$depfile"
+   echo "$object : \\" > "$depfile"
+   cat < "$tmpdepfile" >> "$depfile"
+@@ -740,15 +656,15 @@ msvisualcpp)
+       shift
+       ;;
+     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+-        set fnord "$@"
+-        shift
+-        shift
+-        ;;
++	set fnord "$@"
++	shift
++	shift
++	;;
+     *)
+-        set fnord "$@" "$arg"
+-        shift
+-        shift
+-        ;;
++	set fnord "$@" "$arg"
++	shift
++	shift
++	;;
+     esac
+   done
+   "$@" -E 2>/dev/null |

package/libsoup/patches/patch-build-aux_missing

@@ -0,0 +1,440 @@
+--- libsoup-2.44.2.orig/build-aux/missing	2013-10-18 00:01:48.000000000 +0200
++++ libsoup-2.44.2/build-aux/missing	2014-04-14 17:21:42.180934853 +0200
+@@ -1,10 +1,10 @@
+ #! /bin/sh
+-# Common wrapper for a few potentially missing GNU programs.
++# Common stub for a few missing GNU programs while installing.
+ 
+-scriptversion=2012-06-26.16; # UTC
++scriptversion=2012-01-06.18; # UTC
+ 
+-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+-# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
++# Copyright (C) 1996-2012 Free Software Foundation, Inc.
++# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+ 
+ # This program is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+@@ -29,33 +29,61 @@ if test $# -eq 0; then
+   exit 1
+ fi
+ 
+-case $1 in
++run=:
++sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
++sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+ 
+-  --is-lightweight)
+-    # Used by our autoconf macros to check whether the available missing
+-    # script is modern enough.
+-    exit 0
+-    ;;
++# In the cases where this matters, 'missing' is being run in the
++# srcdir already.
++if test -f configure.ac; then
++  configure_ac=configure.ac
++else
++  configure_ac=configure.in
++fi
+ 
+-  --run)
+-    # Back-compat with the calling convention used by older automake.
+-    shift
+-    ;;
++msg="missing on your system"
++
++case $1 in
++--run)
++  # Try to run requested program, and just exit if it succeeds.
++  run=
++  shift
++  "$@" && exit 0
++  # Exit code 63 means version mismatch.  This often happens
++  # when the user try to use an ancient version of a tool on
++  # a file that requires a minimum version.  In this case we
++  # we should proceed has if the program had been absent, or
++  # if --run hadn't been passed.
++  if test $? = 63; then
++    run=:
++    msg="probably too old"
++  fi
++  ;;
+ 
+   -h|--h|--he|--hel|--help)
+     echo "\
+ $0 [OPTION]... PROGRAM [ARGUMENT]...
+ 
+-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+-to PROGRAM being missing or too old.
++Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
++error status if there is no known handling for PROGRAM.
+ 
+ Options:
+   -h, --help      display this help and exit
+   -v, --version   output version information and exit
++  --run           try to run the given command, and emulate it if it fails
+ 
+ Supported PROGRAM values:
+-  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+-  bison     yacc      flex         lex       help2man
++  aclocal      touch file 'aclocal.m4'
++  autoconf     touch file 'configure'
++  autoheader   touch file 'config.h.in'
++  autom4te     touch the output file, or create a stub one
++  automake     touch all 'Makefile.in' files
++  bison        create 'y.tab.[ch]', if possible, from existing .[ch]
++  flex         create 'lex.yy.c', if possible, from existing .c
++  help2man     touch the output file
++  lex          create 'lex.yy.c', if possible, from existing .c
++  makeinfo     touch the output file
++  yacc         create 'y.tab.[ch]', if possible, from existing .[ch]
+ 
+ Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+ 'g' are ignored when checking the name.
+@@ -70,141 +98,228 @@ Send bug reports to <bug-automake@gnu.or
+     ;;
+ 
+   -*)
+-    echo 1>&2 "$0: unknown '$1' option"
++    echo 1>&2 "$0: Unknown '$1' option"
+     echo 1>&2 "Try '$0 --help' for more information"
+     exit 1
+     ;;
+ 
+ esac
+ 
+-# Run the given program, remember its exit status.
+-"$@"; st=$?
++# normalize program name to check for.
++program=`echo "$1" | sed '
++  s/^gnu-//; t
++  s/^gnu//; t
++  s/^g//; t'`
+ 
+-# If it succeeded, we are done.
+-test $st -eq 0 && exit 0
++# Now exit if we have it, but it failed.  Also exit now if we
++# don't have it and --version was passed (most likely to detect
++# the program).  This is about non-GNU programs, so use $1 not
++# $program.
++case $1 in
++  lex*|yacc*)
++    # Not GNU programs, they don't have --version.
++    ;;
+ 
+-# Also exit now if we it failed (or wasn't found), and '--version' was
+-# passed; such an option is passed most likely to detect whether the
+-# program is present and works.
+-case $2 in --version|--help) exit $st;; esac
++  *)
++    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
++       # We have it, but it failed.
++       exit 1
++    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
++       # Could not run --version or --help.  This is probably someone
++       # running '$TOOL --version' or '$TOOL --help' to check whether
++       # $TOOL exists and not knowing $TOOL uses missing.
++       exit 1
++    fi
++    ;;
++esac
+ 
+-# Exit code 63 means version mismatch.  This often happens when the user
+-# tries to use an ancient version of a tool on a file that requires a
+-# minimum version.
+-if test $st -eq 63; then
+-  msg="probably too old"
+-elif test $st -eq 127; then
+-  # Program was missing.
+-  msg="missing on your system"
+-else
+-  # Program was found and executed, but failed.  Give up.
+-  exit $st
+-fi
++# If it does not exist, or fails to run (possibly an outdated version),
++# try to emulate it.
++case $program in
++  aclocal*)
++    echo 1>&2 "\
++WARNING: '$1' is $msg.  You should only need it if
++         you modified 'acinclude.m4' or '${configure_ac}'.  You might want
++         to install the Automake and Perl packages.  Grab them from
++         any GNU archive site."
++    touch aclocal.m4
++    ;;
+ 
+-perl_URL=http://www.perl.org/
+-flex_URL=http://flex.sourceforge.net/
+-gnu_software_URL=http://www.gnu.org/software
++  autoconf*)
++    echo 1>&2 "\
++WARNING: '$1' is $msg.  You should only need it if
++         you modified '${configure_ac}'.  You might want to install the
++         Autoconf and GNU m4 packages.  Grab them from any GNU
++         archive site."
++    touch configure
++    ;;
+ 
+-program_details ()
+-{
+-  case $1 in
+-    aclocal|automake)
+-      echo "The '$1' program is part of the GNU Automake package:"
+-      echo "<$gnu_software_URL/automake>"
+-      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+-      echo "<$gnu_software_URL/autoconf>"
+-      echo "<$gnu_software_URL/m4/>"
+-      echo "<$perl_URL>"
+-      ;;
+-    autoconf|autom4te|autoheader)
+-      echo "The '$1' program is part of the GNU Autoconf package:"
+-      echo "<$gnu_software_URL/autoconf/>"
+-      echo "It also requires GNU m4 and Perl in order to run:"
+-      echo "<$gnu_software_URL/m4/>"
+-      echo "<$perl_URL>"
+-      ;;
+-  esac
+-}
++  autoheader*)
++    echo 1>&2 "\
++WARNING: '$1' is $msg.  You should only need it if
++         you modified 'acconfig.h' or '${configure_ac}'.  You might want
++         to install the Autoconf and GNU m4 packages.  Grab them
++         from any GNU archive site."
++    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
++    test -z "$files" && files="config.h"
++    touch_files=
++    for f in $files; do
++      case $f in
++      *:*) touch_files="$touch_files "`echo "$f" |
++				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
++      *) touch_files="$touch_files $f.in";;
++      esac
++    done
++    touch $touch_files
++    ;;
+ 
+-give_advice ()
+-{
+-  # Normalize program name to check for.
+-  normalized_program=`echo "$1" | sed '
+-    s/^gnu-//; t
+-    s/^gnu//; t
+-    s/^g//; t'`
++  automake*)
++    echo 1>&2 "\
++WARNING: '$1' is $msg.  You should only need it if
++         you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
++         You might want to install the Automake and Perl packages.
++         Grab them from any GNU archive site."
++    find . -type f -name Makefile.am -print |
++	   sed 's/\.am$/.in/' |
++	   while read f; do touch "$f"; done
++    ;;
+ 
+-  printf '%s\n' "'$1' is $msg."
++  autom4te*)
++    echo 1>&2 "\
++WARNING: '$1' is needed, but is $msg.
++         You might have modified some files without having the
++         proper tools for further handling them.
++         You can get '$1' as part of Autoconf from any GNU
++         archive site."
+ 
+-  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+-  case $normalized_program in
+-    autoconf*)
+-      echo "You should only need it if you modified 'configure.ac',"
+-      echo "or m4 files included by it."
+-      program_details 'autoconf'
+-      ;;
+-    autoheader*)
+-      echo "You should only need it if you modified 'acconfig.h' or"
+-      echo "$configure_deps."
+-      program_details 'autoheader'
+-      ;;
+-    automake*)
+-      echo "You should only need it if you modified 'Makefile.am' or"
+-      echo "$configure_deps."
+-      program_details 'automake'
+-      ;;
+-    aclocal*)
+-      echo "You should only need it if you modified 'acinclude.m4' or"
+-      echo "$configure_deps."
+-      program_details 'aclocal'
+-      ;;
+-   autom4te*)
+-      echo "You might have modified some maintainer files that require"
+-      echo "the 'automa4te' program to be rebuilt."
+-      program_details 'autom4te'
+-      ;;
+-    bison*|yacc*)
+-      echo "You should only need it if you modified a '.y' file."
+-      echo "You may want to install the GNU Bison package:"
+-      echo "<$gnu_software_URL/bison/>"
+-      ;;
+-    lex*|flex*)
+-      echo "You should only need it if you modified a '.l' file."
+-      echo "You may want to install the Fast Lexical Analyzer package:"
+-      echo "<$flex_URL>"
+-      ;;
+-    help2man*)
+-      echo "You should only need it if you modified a dependency" \
+-           "of a man page."
+-      echo "You may want to install the GNU Help2man package:"
+-      echo "<$gnu_software_URL/help2man/>"
++    file=`echo "$*" | sed -n "$sed_output"`
++    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++    if test -f "$file"; then
++	touch $file
++    else
++	test -z "$file" || exec >$file
++	echo "#! /bin/sh"
++	echo "# Created by GNU Automake missing as a replacement of"
++	echo "#  $ $@"
++	echo "exit 0"
++	chmod +x $file
++	exit 1
++    fi
+     ;;
+-    makeinfo*)
+-      echo "You should only need it if you modified a '.texi' file, or"
+-      echo "any other file indirectly affecting the aspect of the manual."
+-      echo "You might want to install the Texinfo package:"
+-      echo "<$gnu_software_URL/texinfo/>"
+-      echo "The spurious makeinfo call might also be the consequence of"
+-      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+-      echo "want to install GNU make:"
+-      echo "<$gnu_software_URL/make/>"
+-      ;;
+-    *)
+-      echo "You might have modified some files without having the proper"
+-      echo "tools for further handling them.  Check the 'README' file, it"
+-      echo "often tells you about the needed prerequisites for installing"
+-      echo "this package.  You may also peek at any GNU archive site, in"
+-      echo "case some other package contains this missing '$1' program."
+-      ;;
+-  esac
+-}
+ 
+-give_advice "$1" | sed -e '1s/^/WARNING: /' \
+-                       -e '2,$s/^/         /' >&2
++  bison*|yacc*)
++    echo 1>&2 "\
++WARNING: '$1' $msg.  You should only need it if
++         you modified a '.y' file.  You may need the Bison package
++         in order for those modifications to take effect.  You can get
++         Bison from any GNU archive site."
++    rm -f y.tab.c y.tab.h
++    if test $# -ne 1; then
++        eval LASTARG=\${$#}
++	case $LASTARG in
++	*.y)
++	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
++	    if test -f "$SRCFILE"; then
++	         cp "$SRCFILE" y.tab.c
++	    fi
++	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
++	    if test -f "$SRCFILE"; then
++	         cp "$SRCFILE" y.tab.h
++	    fi
++	  ;;
++	esac
++    fi
++    if test ! -f y.tab.h; then
++	echo >y.tab.h
++    fi
++    if test ! -f y.tab.c; then
++	echo 'main() { return 0; }' >y.tab.c
++    fi
++    ;;
+ 
+-# Propagate the correct exit status (expected to be 127 for a program
+-# not found, 63 for a program that failed due to version mismatch).
+-exit $st
++  lex*|flex*)
++    echo 1>&2 "\
++WARNING: '$1' is $msg.  You should only need it if
++         you modified a '.l' file.  You may need the Flex package
++         in order for those modifications to take effect.  You can get
++         Flex from any GNU archive site."
++    rm -f lex.yy.c
++    if test $# -ne 1; then
++        eval LASTARG=\${$#}
++	case $LASTARG in
++	*.l)
++	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
++	    if test -f "$SRCFILE"; then
++	         cp "$SRCFILE" lex.yy.c
++	    fi
++	  ;;
++	esac
++    fi
++    if test ! -f lex.yy.c; then
++	echo 'main() { return 0; }' >lex.yy.c
++    fi
++    ;;
++
++  help2man*)
++    echo 1>&2 "\
++WARNING: '$1' is $msg.  You should only need it if
++	 you modified a dependency of a manual page.  You may need the
++	 Help2man package in order for those modifications to take
++	 effect.  You can get Help2man from any GNU archive site."
++
++    file=`echo "$*" | sed -n "$sed_output"`
++    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++    if test -f "$file"; then
++	touch $file
++    else
++	test -z "$file" || exec >$file
++	echo ".ab help2man is required to generate this page"
++	exit $?
++    fi
++    ;;
++
++  makeinfo*)
++    echo 1>&2 "\
++WARNING: '$1' is $msg.  You should only need it if
++         you modified a '.texi' or '.texinfo' file, or any other file
++         indirectly affecting the aspect of the manual.  The spurious
++         call might also be the consequence of using a buggy 'make' (AIX,
++         DU, IRIX).  You might want to install the Texinfo package or
++         the GNU make package.  Grab either from any GNU archive site."
++    # The file to touch is that specified with -o ...
++    file=`echo "$*" | sed -n "$sed_output"`
++    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
++    if test -z "$file"; then
++      # ... or it is the one specified with @setfilename ...
++      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
++      file=`sed -n '
++	/^@setfilename/{
++	  s/.* \([^ ]*\) *$/\1/
++	  p
++	  q
++	}' $infile`
++      # ... or it is derived from the source name (dir/f.texi becomes f.info)
++      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
++    fi
++    # If the file does not exist, the user really needs makeinfo;
++    # let's fail without touching anything.
++    test -f $file || exit 1
++    touch $file
++    ;;
++
++  *)
++    echo 1>&2 "\
++WARNING: '$1' is needed, and is $msg.
++         You might have modified some files without having the
++         proper tools for further handling them.  Check the 'README' file,
++         it often tells you about the needed prerequisites for installing
++         this package.  You may also peek at any GNU archive site, in case
++         some other package would contain this missing '$1' program."
++    exit 1
++    ;;
++esac
++
++exit 0
+ 
+ # Local variables:
+ # eval: (add-hook 'write-file-hooks 'time-stamp)

package/libsoup/patches/patch-configure_ac

@@ -0,0 +1,10 @@
+--- libsoup-2.44.2.orig/configure.ac	2013-11-11 23:40:56.000000000 +0100
++++ libsoup-2.44.2/configure.ac	2014-04-14 17:20:43.656655730 +0200
+@@ -116,7 +116,6 @@ AM_CONDITIONAL(OS_WIN32, [test $os_win32
+ dnl ************************
+ dnl *** gettext/intltool ***
+ dnl ************************
+-IT_PROG_INTLTOOL([0.35.0])
+ GETTEXT_PACKAGE=libsoup
+ AC_SUBST([GETTEXT_PACKAGE])
+ AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE],["$GETTEXT_PACKAGE"],[The gettext domain name])

package/libwebp/Makefile

@@ -0,0 +1,25 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		libwebp
+PKG_VERSION:=		0.3.1
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		dc862bb4006d819b7587767a9e83d31f
+PKG_DESCR:=		new image format for the web
+PKG_SECTION:=		libs
+PKG_URL:=		https://developers.google.com/speed/webp/
+PKG_SITES:=		https://webp.googlecode.com/files/
+PKG_OPTS:=		dev
+
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call PKG_template,LIBWEBP,libwebp,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION},${PKG_OPTS}))
+
+libwebp-install:
+	$(INSTALL_DIR) $(IDIR_LIBWEBP)/usr/lib
+	$(CP) $(WRKINST)/usr/lib/libwebp*.so* \
+		$(IDIR_LIBWEBP)/usr/lib
+
+include ${TOPDIR}/mk/pkg-bottom.mk

package/ltrace/Makefile

@@ -0,0 +1,26 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		ltrace
+PKG_VERSION:=		0.7.3
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		2cb7660738b1e28fd84ce0dc06f6ea69
+PKG_DESCR:=		intercepts and records dynamic library calls 
+PKG_SECTION:=		debug
+PKG_DEPENDS:=		libelf
+PKG_BUILDDEP:=		libelf
+PKG_URL:=		http://ltrace.org/
+PKG_SITES:=		https://alioth.debian.org/frs/download.php/file/3948/
+
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call PKG_template,LTRACE,ltrace,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION}))
+
+ltrace-install:
+	$(INSTALL_DIR) $(IDIR_LTRACE)/usr/sbin
+	$(INSTALL_BIN) $(WRKINST)/usr/bin/ltrace \
+		$(IDIR_LTRACE)/usr/sbin
+
+include ${TOPDIR}/mk/pkg-bottom.mk

package/ltrace/patches/patch-breakpoints_c

@@ -0,0 +1,14 @@
+--- ltrace-0.7.3.orig/breakpoints.c	2013-09-09 11:46:54.000000000 +0200
++++ ltrace-0.7.3/breakpoints.c	2013-10-16 11:26:00.000000000 +0200
+@@ -159,9 +159,10 @@ int
+ breakpoint_clone(struct breakpoint *retp, struct Process *new_proc,
+ 		 struct breakpoint *bp, struct Process *old_proc)
+ {
++	__attribute__((unused))int rc;
+ 	struct library_symbol *libsym = NULL;
+ 	if (bp->libsym != NULL) {
+-		int rc = proc_find_symbol(new_proc, bp->libsym, NULL, &libsym);
++		rc = proc_find_symbol(new_proc, bp->libsym, NULL, &libsym);
+ 		assert(rc == 0);
+ 	}
+ 

package/ltrace/patches/patch-breakpoints_c.orig

@@ -0,0 +1,14 @@
+--- ltrace-0.7.3.orig/breakpoints.c	2013-09-09 11:46:54.000000000 +0200
++++ ltrace-0.7.3/breakpoints.c	2013-10-16 11:13:21.000000000 +0200
+@@ -159,9 +159,10 @@ int
+ breakpoint_clone(struct breakpoint *retp, struct Process *new_proc,
+ 		 struct breakpoint *bp, struct Process *old_proc)
+ {
++	int rc;
+ 	struct library_symbol *libsym = NULL;
+ 	if (bp->libsym != NULL) {
+-		int rc = proc_find_symbol(new_proc, bp->libsym, NULL, &libsym);
++		rc = proc_find_symbol(new_proc, bp->libsym, NULL, &libsym);
+ 		assert(rc == 0);
+ 	}
+ 

package/ltrace/patches/patch-handle_event_c

@@ -0,0 +1,19 @@
+--- ltrace-0.7.3.orig/handle_event.c	2013-02-05 12:05:39.000000000 +0100
++++ ltrace-0.7.3/handle_event.c	2013-10-16 11:29:03.000000000 +0200
+@@ -533,6 +533,7 @@ calc_time_spent(Process *proc) {
+ 
+ static void
+ handle_sysret(Event *event) {
++	__attribute__((unused))unsigned d;
+ 	debug(DEBUG_FUNCTION, "handle_sysret(pid=%d, sysnum=%d)", event->proc->pid, event->e_un.sysnum);
+ 	if (event->proc->state != STATE_IGNORED) {
+ 		if (opt_T || options.summary) {
+@@ -544,7 +545,7 @@ handle_sysret(Event *event) {
+ 						     event->e_un.sysnum));
+ 
+ 		assert(event->proc->callstack_depth > 0);
+-		unsigned d = event->proc->callstack_depth - 1;
++		d = event->proc->callstack_depth - 1;
+ 		assert(event->proc->callstack[d].is_syscall);
+ 		callstack_pop(event->proc);
+ 	}

package/ltrace/patches/patch-proc_c

@@ -0,0 +1,32 @@
+--- ltrace-0.7.3.orig/proc.c	2013-02-05 12:05:39.000000000 +0100
++++ ltrace-0.7.3/proc.c	2013-10-16 11:37:49.000000000 +0200
+@@ -329,6 +329,7 @@ clone_single_bp(void *key, void *value,
+ int
+ process_clone(struct Process *retp, struct Process *proc, pid_t pid)
+ {
++	__attribute__((unused))int rc;
+ 	if (process_bare_init(retp, proc->filename, pid, 0) < 0) {
+ 	fail1:
+ 		fprintf(stderr, "failed to clone process %d->%d : %s\n",
+@@ -432,7 +433,7 @@ process_clone(struct Process *retp, stru
+ 		 * library.  */
+ 		if (!elem->is_syscall && elem->c_un.libfunc != NULL) {
+ 			struct library_symbol *libfunc = elem->c_un.libfunc;
+-			int rc = proc_find_symbol(retp, libfunc,
++			rc = proc_find_symbol(retp, libfunc,
+ 						  NULL, &elem->c_un.libfunc);
+ 			assert(rc == 0);
+ 		}
+@@ -937,10 +938,11 @@ proc_add_breakpoint(struct Process *proc
+ void
+ proc_remove_breakpoint(struct Process *proc, struct breakpoint *bp)
+ {
++	__attribute__((unused))struct breakpoint *removed;
+ 	debug(DEBUG_FUNCTION, "proc_remove_breakpoint(pid=%d, %s@%p)",
+ 	      proc->pid, breakpoint_name(bp), bp->addr);
+ 	check_leader(proc);
+-	struct breakpoint *removed = dict_remove(proc->breakpoints, bp->addr);
++	removed = dict_remove(proc->breakpoints, bp->addr);
+ 	assert(removed == bp);
+ }
+ 

package/midori/Makefile

@@ -0,0 +1,40 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		midori
+PKG_VERSION:=		0.5.8
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		5815eac39f4d9511ce2c71a81567647f
+PKG_DESCR:=		web browser
+PKG_SECTION:=		x11/apps
+PKG_DEPENDS:=		libnotify webkitgtk
+PKG_BUILDDEP:=		autotool cmake-host vala-host libnotify webkitgtk
+PKG_BUILDDEP+=		librsvg-host librsvg
+PKG_URL:=		http://www.midori-browser.org
+PKG_SITES:=		http://www.midori-browser.org/downloads/
+
+WRKBUILD=               ${WRKDIR}/${PKG_NAME}-obj
+DISTFILES:=		${PKG_NAME}-${PKG_VERSION}.tar.xz
+
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call PKG_template,MIDORI,midori,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION}))
+
+CONFIG_STYLE:=          manual
+
+do-configure:
+	(cd $(WRKBUILD) && PATH='${HOST_PATH}' \
+		cmake -DCMAKE_SYSTEM_NAME=Linux \
+		-DCMAKE_INSTALL_PREFIX=/usr \
+		-DENABLE_NLS=0 \
+		-DUSE_ZEITGEIST=0 \
+		$(WRKSRC)/)
+
+midori-install:
+	$(INSTALL_DIR) $(IDIR_MIDORI)/usr/bin
+	$(INSTALL_BIN) $(WRKINST)/usr/bin/midori \
+		$(IDIR_MIDORI)/usr/bin
+
+include ${TOPDIR}/mk/pkg-bottom.mk

package/vala/Makefile

@@ -0,0 +1,33 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		vala
+PKG_VERSION:=		0.24.0
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		beddeff9c06d3c278988b237da0e7401
+PKG_DESCR:=		compiler for the GObject type system
+PKG_SECTION:=		lang
+PKG_BUILDDEP:=		glib
+HOST_BUILDDEP:=		glib-host
+PKG_URL:=		https://wiki.gnome.org/Vala
+PKG_SITES:=		http://download.gnome.org/sources/vala/0.24/
+
+DISTFILES:=             ${PKG_NAME}-${PKG_VERSION}.tar.xz
+
+include $(TOPDIR)/mk/host.mk
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call HOST_template,VALA,vala,$(PKG_VERSION)-${PKG_RELEASE}))
+$(eval $(call PKG_template,VALA,vala,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION}))
+
+HOST_STYLE:=		auto
+
+vala-install:
+	$(INSTALL_DIR) $(IDIR_VALA)/usr/bin
+	$(INSTALL_BIN) $(WRKINST)/usr/bin/valac \
+		$(IDIR_VALA)/usr/bin
+
+include ${TOPDIR}/mk/host-bottom.mk
+include ${TOPDIR}/mk/pkg-bottom.mk

package/webkitgtk/Makefile

@@ -0,0 +1,43 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		webkitgtk
+PKG_VERSION:=		2.4.0
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		c759bf11fe4cadd1268630f16a97f7b9
+PKG_DESCR:=		web browser engine
+PKG_SECTION:=		libs
+PKG_DEPENDS:=		glib icu4c zlib libwebp libgtk libsoup
+PKG_DEPENDS+=		libsecret libxt
+PKG_DEPENDS+=		gst-plugins-base gstreamer
+PKG_BUILDDEP:=		glib icu4c zlib libwebp gtk+
+PKG_BUILDDEP+=		libsoup libsecret libXt
+PKG_BUILDDEP+=		gst-plugins-base gstreamer
+PKG_URL:=		http://www.webkitgtk.org/
+PKG_SITES:=		http://webkitgtk.org/releases/
+PKG_OPTS:=		dev
+
+DISTFILES:=		${PKG_NAME}-${PKG_VERSION}.tar.xz
+
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call PKG_template,WEBKITGTK,webkitgtk,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION},${PKG_OPTS}))
+
+MAKE_FILE:=		GNUmakefile
+CONFIGURE_ENV+=		AR_FLAGS="cr"
+CONFIGURE_ARGS+=	--with-gtk=2.0 \
+			--disable-webkit2 \
+			--disable-geolocation
+
+pre-build:
+	mkdir -p $(WRKBUILD)/DerivedSources/{webkit,webkitdom,InjectedBundle,Platform}
+	mkdir -p $(WRKBUILD)/DerivedSources/WebKit2/webkit2gtk/webkit2
+
+webkitgtk-install:
+	$(INSTALL_DIR) $(IDIR_WEBKITGTK)/usr/lib
+	$(CP) $(WRKINST)/usr/lib/webkitgtk*.so* \
+		$(IDIR_WEBKITGTK)/usr/lib
+
+include ${TOPDIR}/mk/pkg-bottom.mk