Browse Source

add u-boot hosttools support, remove mkimage package

Waldemar Brodkorb 9 years ago
parent
commit
66abdde90c

+ 0 - 34
package/mkimage/Makefile

@@ -1,34 +0,0 @@
-# This file is part of the OpenADK project. OpenADK is copyrighted
-# material, please see the LICENCE file in the top-level directory.
-
-include $(ADK_TOPDIR)/rules.mk
-
-PKG_NAME:=		mkimage
-PKG_VERSION:=		0.1
-PKG_RELEASE:=		1
-PKG_MD5SUM:=		1b7a781fb4cf8938842279bd3e8ee852
-PKG_DESCR:=		stripped down mkimage utility
-PKG_SECTION:=		sys/misc
-
-NO_DISTFILES:=		1
-
-PKG_CFLINE_MKIMAGE:=	depends on ADK_HOST_ONLY
-
-include $(ADK_TOPDIR)/mk/host.mk
-include $(ADK_TOPDIR)/mk/package.mk
-
-$(eval $(call HOST_template,MKIMAGE,mkimage,$(PKG_VERSION)-${PKG_RELEASE}))
-
-HOST_STYLE:=		manual
-
-host-build:
-	$(HOST_CC) $(HOST_CFLAGS) -o ${WRKBUILD}/mkimage \
-		${WRKBUILD}/mkimage.c ${WRKBUILD}/crc32.c
-
-mkimage-hostinstall:
-	${INSTALL_DIR} ${STAGING_HOST_DIR}/usr/bin
-	${INSTALL_BIN} ${WRKBUILD}/mkimage \
-		${STAGING_HOST_DIR}/usr/bin
-
-include ${ADK_TOPDIR}/mk/host-bottom.mk
-include ${ADK_TOPDIR}/mk/pkg-bottom.mk

+ 0 - 200
package/mkimage/src/crc32.c

@@ -1,200 +0,0 @@
-/*
- * This file is derived from crc32.c from the zlib-1.1.3 distribution
- * by Jean-loup Gailly and Mark Adler.
- */
-
-/* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#define USE_HOSTCC
-
-#ifndef USE_HOSTCC	/* Shut down "ANSI does not permit..." warnings */
-#include <common.h>	/* to get command definitions like CFG_CMD_JFFS2 */
-#endif
-
-#include "zlib.h"
-
-#define local static
-#define ZEXPORT	/* empty */
-unsigned long crc32 (unsigned long, const unsigned char *, unsigned int);
-
-#ifdef DYNAMIC_CRC_TABLE
-
-local int crc_table_empty = 1;
-local uLongf crc_table[256];
-local void make_crc_table OF((void));
-
-/*
-  Generate a table for a byte-wise 32-bit CRC calculation on the polynomial:
-  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
-
-  Polynomials over GF(2) are represented in binary, one bit per coefficient,
-  with the lowest powers in the most significant bit.  Then adding polynomials
-  is just exclusive-or, and multiplying a polynomial by x is a right shift by
-  one.  If we call the above polynomial p, and represent a byte as the
-  polynomial q, also with the lowest power in the most significant bit (so the
-  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
-  where a mod b means the remainder after dividing a by b.
-
-  This calculation is done using the shift-register method of multiplying and
-  taking the remainder.  The register is initialized to zero, and for each
-  incoming bit, x^32 is added mod p to the register if the bit is a one (where
-  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
-  x (which is shifting right by one and adding x^32 mod p if the bit shifted
-  out is a one).  We start with the highest power (least significant bit) of
-  q and repeat for all eight bits of q.
-
-  The table is simply the CRC of all possible eight bit values.  This is all
-  the information needed to generate CRC's on data a byte at a time for all
-  combinations of CRC register values and incoming bytes.
-*/
-local void make_crc_table()
-{
-  uLong c;
-  int n, k;
-  uLong poly;            /* polynomial exclusive-or pattern */
-  /* terms of polynomial defining this crc (except x^32): */
-  static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
-
-  /* make exclusive-or pattern from polynomial (0xedb88320L) */
-  poly = 0L;
-  for (n = 0; n < sizeof(p)/sizeof(Byte); n++)
-    poly |= 1L << (31 - p[n]);
-
-  for (n = 0; n < 256; n++)
-  {
-    c = (uLong)n;
-    for (k = 0; k < 8; k++)
-      c = c & 1 ? poly ^ (c >> 1) : c >> 1;
-    crc_table[n] = c;
-  }
-  crc_table_empty = 0;
-}
-#else
-/* ========================================================================
- * Table of CRC-32's of all single-byte values (made by make_crc_table)
- */
-local const uLongf crc_table[256] = {
-  0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
-  0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
-  0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
-  0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
-  0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
-  0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
-  0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
-  0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
-  0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
-  0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
-  0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
-  0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
-  0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
-  0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
-  0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
-  0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
-  0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
-  0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
-  0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
-  0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
-  0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
-  0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
-  0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
-  0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
-  0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
-  0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
-  0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
-  0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
-  0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
-  0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
-  0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
-  0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
-  0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
-  0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
-  0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
-  0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
-  0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
-  0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
-  0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
-  0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
-  0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
-  0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
-  0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
-  0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
-  0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
-  0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
-  0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
-  0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
-  0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
-  0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
-  0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
-  0x2d02ef8dL
-};
-#endif
-
-#if 0
-/* =========================================================================
- * This function can be used by asm versions of crc32()
- */
-const uLongf * ZEXPORT get_crc_table()
-{
-#ifdef DYNAMIC_CRC_TABLE
-  if (crc_table_empty) make_crc_table();
-#endif
-  return (const uLongf *)crc_table;
-}
-#endif
-
-/* ========================================================================= */
-#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
-#define DO2(buf)  DO1(buf); DO1(buf);
-#define DO4(buf)  DO2(buf); DO2(buf);
-#define DO8(buf)  DO4(buf); DO4(buf);
-
-/* ========================================================================= */
-uLong ZEXPORT crc32(crc, buf, len)
-    uLong crc;
-    const Bytef *buf;
-    uInt len;
-{
-#ifdef DYNAMIC_CRC_TABLE
-    if (crc_table_empty)
-      make_crc_table();
-#endif
-    crc = crc ^ 0xffffffffL;
-    while (len >= 8)
-    {
-      DO8(buf);
-      len -= 8;
-    }
-    if (len) do {
-      DO1(buf);
-    } while (--len);
-    return crc ^ 0xffffffffL;
-}
-
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) || \
-	((CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY))
-
-/* No ones complement version. JFFS2 (and other things ?)
- * don't use ones compliment in their CRC calculations.
- */
-uLong ZEXPORT crc32_no_comp(uLong crc, const Bytef *buf, uInt len)
-{
-#ifdef DYNAMIC_CRC_TABLE
-    if (crc_table_empty)
-      make_crc_table();
-#endif
-    while (len >= 8)
-    {
-      DO8(buf);
-      len -= 8;
-    }
-    if (len) do {
-      DO1(buf);
-    } while (--len);
-
-    return crc;
-}
-
-#endif	/* CFG_CMD_JFFS2 */

+ 0 - 162
package/mkimage/src/image.h

@@ -1,162 +0,0 @@
-/*
- * (C) Copyright 2000-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************
- * NOTE: This header file defines an interface to U-Boot. Including
- * this (unmodified) header file in another file is considered normal
- * use of U-Boot, and does *not* fall under the heading of "derived
- * work".
- ********************************************************************
- */
-
-#ifndef __IMAGE_H__
-#define __IMAGE_H__
-
-/*
- * Operating System Codes
- */
-#define IH_OS_INVALID		0	/* Invalid OS	*/
-#define IH_OS_OPENBSD		1	/* OpenBSD	*/
-#define IH_OS_NETBSD		2	/* NetBSD	*/
-#define IH_OS_FREEBSD		3	/* FreeBSD	*/
-#define IH_OS_4_4BSD		4	/* 4.4BSD	*/
-#define IH_OS_LINUX		5	/* Linux	*/
-#define IH_OS_SVR4		6	/* SVR4		*/
-#define IH_OS_ESIX		7	/* Esix		*/
-#define IH_OS_SOLARIS		8	/* Solaris	*/
-#define IH_OS_IRIX		9	/* Irix		*/
-#define IH_OS_SCO		10	/* SCO		*/
-#define IH_OS_DELL		11	/* Dell		*/
-#define IH_OS_NCR		12	/* NCR		*/
-#define IH_OS_LYNXOS		13	/* LynxOS	*/
-#define IH_OS_VXWORKS		14	/* VxWorks	*/
-#define IH_OS_PSOS		15	/* pSOS		*/
-#define IH_OS_QNX		16	/* QNX		*/
-#define IH_OS_U_BOOT		17	/* Firmware	*/
-#define IH_OS_RTEMS		18	/* RTEMS	*/
-#define IH_OS_ARTOS		19	/* ARTOS	*/
-#define IH_OS_UNITY		20	/* Unity OS	*/
-
-/*
- * CPU Architecture Codes (supported by Linux)
- */
-#define IH_CPU_INVALID		0	/* Invalid CPU	*/
-#define IH_CPU_ALPHA		1	/* Alpha	*/
-#define IH_CPU_ARM		2	/* ARM		*/
-#define IH_CPU_I386		3	/* Intel x86	*/
-#define IH_CPU_IA64		4	/* IA64		*/
-#define IH_CPU_MIPS		5	/* MIPS		*/
-#define IH_CPU_MIPS64		6	/* MIPS	 64 Bit */
-#define IH_CPU_PPC		7	/* PowerPC	*/
-#define IH_CPU_S390		8	/* IBM S390	*/
-#define IH_CPU_SH		9	/* SuperH	*/
-#define IH_CPU_SPARC		10	/* Sparc	*/
-#define IH_CPU_SPARC64		11	/* Sparc 64 Bit */
-#define IH_CPU_M68K		12	/* M68K		*/
-#define IH_CPU_NIOS		13	/* Nios-32	*/
-#define IH_CPU_MICROBLAZE	14	/* MicroBlaze   */
-#define IH_CPU_NIOS2		15	/* Nios-II	*/
-#define IH_CPU_BLACKFIN		16	/* Blackfin	*/
-#define IH_CPU_AVR32		17	/* AVR32	*/
-#define IH_CPU_XTENSA		18	/* XTENSA	*/
-
-/*
- * Image Types
- *
- * "Standalone Programs" are directly runnable in the environment
- *	provided by U-Boot; it is expected that (if they behave
- *	well) you can continue to work in U-Boot after return from
- *	the Standalone Program.
- * "OS Kernel Images" are usually images of some Embedded OS which
- *	will take over control completely. Usually these programs
- *	will install their own set of exception handlers, device
- *	drivers, set up the MMU, etc. - this means, that you cannot
- *	expect to re-enter U-Boot except by resetting the CPU.
- * "RAMDisk Images" are more or less just data blocks, and their
- *	parameters (address, size) are passed to an OS kernel that is
- *	being started.
- * "Multi-File Images" contain several images, typically an OS
- *	(Linux) kernel image and one or more data images like
- *	RAMDisks. This construct is useful for instance when you want
- *	to boot over the network using BOOTP etc., where the boot
- *	server provides just a single image file, but you want to get
- *	for instance an OS kernel and a RAMDisk image.
- *
- *	"Multi-File Images" start with a list of image sizes, each
- *	image size (in bytes) specified by an "uint32_t" in network
- *	byte order. This list is terminated by an "(uint32_t)0".
- *	Immediately after the terminating 0 follow the images, one by
- *	one, all aligned on "uint32_t" boundaries (size rounded up to
- *	a multiple of 4 bytes - except for the last file).
- *
- * "Firmware Images" are binary images containing firmware (like
- *	U-Boot or FPGA images) which usually will be programmed to
- *	flash memory.
- *
- * "Script files" are command sequences that will be executed by
- *	U-Boot's command interpreter; this feature is especially
- *	useful when you configure U-Boot to use a real shell (hush)
- *	as command interpreter (=> Shell Scripts).
- */
-
-#define IH_TYPE_INVALID		0	/* Invalid Image		*/
-#define IH_TYPE_STANDALONE	1	/* Standalone Program		*/
-#define IH_TYPE_KERNEL		2	/* OS Kernel Image		*/
-#define IH_TYPE_RAMDISK		3	/* RAMDisk Image		*/
-#define IH_TYPE_MULTI		4	/* Multi-File Image		*/
-#define IH_TYPE_FIRMWARE	5	/* Firmware Image		*/
-#define IH_TYPE_SCRIPT		6	/* Script file			*/
-#define IH_TYPE_FILESYSTEM	7	/* Filesystem Image (any type)	*/
-#define IH_TYPE_FLATDT		8	/* Binary Flat Device Tree Blob	*/
-
-/*
- * Compression Types
- */
-#define IH_COMP_NONE		0	/*  No	 Compression Used	*/
-#define IH_COMP_GZIP		1	/* gzip	 Compression Used	*/
-#define IH_COMP_BZIP2		2	/* bzip2 Compression Used	*/
-#define IH_COMP_LZMA		3	/* lzma  Compression Used	*/
-
-#define IH_MAGIC	0x27051956	/* Image Magic Number		*/
-#define IH_NMLEN		32	/* Image Name Length		*/
-
-/*
- * all data in network byte order (aka natural aka bigendian)
- */
-
-typedef struct image_header {
-	uint32_t	ih_magic;	/* Image Header Magic Number	*/
-	uint32_t	ih_hcrc;	/* Image Header CRC Checksum	*/
-	uint32_t	ih_time;	/* Image Creation Timestamp	*/
-	uint32_t	ih_size;	/* Image Data Size		*/
-	uint32_t	ih_load;	/* Data	 Load  Address		*/
-	uint32_t	ih_ep;		/* Entry Point Address		*/
-	uint32_t	ih_dcrc;	/* Image Data CRC Checksum	*/
-	uint8_t		ih_os;		/* Operating System		*/
-	uint8_t		ih_arch;	/* CPU architecture		*/
-	uint8_t		ih_type;	/* Image Type			*/
-	uint8_t		ih_comp;	/* Compression Type		*/
-	uint8_t		ih_name[IH_NMLEN];	/* Image Name		*/
-} image_header_t;
-
-
-#endif	/* __IMAGE_H__ */

+ 0 - 756
package/mkimage/src/mkimage.c

@@ -1,756 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * DENX Software Engineering
- * Wolfgang Denk, wd@denx.de
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifdef __APPLE__
-#define __FreeBSD__ 10
-#endif
-
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#ifndef __WIN32__
-#include <netinet/in.h>		/* for host / network byte order conversions	*/
-#endif
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include <time.h>
-#include <unistd.h>
-
-#if defined(__BEOS__) || defined(__NetBSD__) || defined(__APPLE__)
-#include <inttypes.h>
-#include <sys/types.h>
-#endif
-#ifdef __WIN32__
-typedef unsigned int __u32;
-
-#define SWAP_LONG(x) \
-	((__u32)( \
-		(((__u32)(x) & (__u32)0x000000ffUL) << 24) | \
-		(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) | \
-		(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) | \
-		(((__u32)(x) & (__u32)0xff000000UL) >> 24) ))
-typedef		unsigned char	uint8_t;
-typedef		unsigned short	uint16_t;
-typedef		unsigned int	uint32_t;
-
-#define     ntohl(a)	SWAP_LONG(a)
-#define     htonl(a)	SWAP_LONG(a)
-#endif	/* __WIN32__ */
-
-#ifndef	O_BINARY		/* should be define'd on __WIN32__ */
-#define O_BINARY	0
-#endif
-
-#include "image.h"
-
-extern int errno;
-
-#ifndef MAP_FAILED
-#define MAP_FAILED (-1)
-#endif
-
-char *cmdname;
-
-extern unsigned long crc32 (unsigned long crc, const char *buf, unsigned int len);
-
-typedef struct table_entry {
-	int	val;		/* as defined in image.h	*/
-	char	*sname;		/* short (input) name		*/
-	char	*lname;		/* long (output) name		*/
-} table_entry_t;
-
-table_entry_t arch_name[] = {
-    {	IH_CPU_INVALID,		NULL,		"Invalid CPU",	},
-    {	IH_CPU_ALPHA,		"alpha",	"Alpha",	},
-    {	IH_CPU_ARM,		"arm",		"ARM",		},
-    {	IH_CPU_I386,		"x86",		"Intel x86",	},
-    {	IH_CPU_IA64,		"ia64",		"IA64",		},
-    {	IH_CPU_M68K,		"m68k",		"MC68000",	},
-    {	IH_CPU_MICROBLAZE,	"microblaze",	"MicroBlaze",	},
-    {	IH_CPU_MIPS,		"mips",		"MIPS",		},
-    {	IH_CPU_MIPS64,		"mips64",	"MIPS 64 Bit",	},
-    {	IH_CPU_NIOS,		"nios",		"NIOS",		},
-    {	IH_CPU_NIOS2,		"nios2",	"NIOS II",	},
-    {	IH_CPU_PPC,		"ppc",		"PowerPC",	},
-    {	IH_CPU_S390,		"s390",		"IBM S390",	},
-    {	IH_CPU_SH,		"sh",		"SuperH",	},
-    {	IH_CPU_SPARC,		"sparc",	"SPARC",	},
-    {	IH_CPU_SPARC64,		"sparc64",	"SPARC 64 Bit",	},
-    {	IH_CPU_BLACKFIN,	"blackfin",	"Blackfin",	},
-    {	IH_CPU_AVR32,		"avr32",	"AVR32",	},
-    {	IH_CPU_XTENSA,		"xtensa",	"XTENSA",	},
-    {	-1,			"",		"",		},
-};
-
-table_entry_t os_name[] = {
-    {	IH_OS_INVALID,	NULL,		"Invalid OS",		},
-    {	IH_OS_4_4BSD,	"4_4bsd",	"4_4BSD",		},
-    {	IH_OS_ARTOS,	"artos",	"ARTOS",		},
-    {	IH_OS_DELL,	"dell",		"Dell",			},
-    {	IH_OS_ESIX,	"esix",		"Esix",			},
-    {	IH_OS_FREEBSD,	"freebsd",	"FreeBSD",		},
-    {	IH_OS_IRIX,	"irix",		"Irix",			},
-    {	IH_OS_LINUX,	"linux",	"Linux",		},
-    {	IH_OS_LYNXOS,	"lynxos",	"LynxOS",		},
-    {	IH_OS_NCR,	"ncr",		"NCR",			},
-    {	IH_OS_NETBSD,	"netbsd",	"NetBSD",		},
-    {	IH_OS_OPENBSD,	"openbsd",	"OpenBSD",		},
-    {	IH_OS_PSOS,	"psos",		"pSOS",			},
-    {	IH_OS_QNX,	"qnx",		"QNX",			},
-    {	IH_OS_RTEMS,	"rtems",	"RTEMS",		},
-    {	IH_OS_SCO,	"sco",		"SCO",			},
-    {	IH_OS_SOLARIS,	"solaris",	"Solaris",		},
-    {	IH_OS_SVR4,	"svr4",		"SVR4",			},
-    {	IH_OS_U_BOOT,	"u-boot",	"U-Boot",		},
-    {	IH_OS_VXWORKS,	"vxworks",	"VxWorks",		},
-    {	-1,		"",		"",			},
-};
-
-table_entry_t type_name[] = {
-    {	IH_TYPE_INVALID,    NULL,	  "Invalid Image",	},
-    {	IH_TYPE_FILESYSTEM, "filesystem", "Filesystem Image",	},
-    {	IH_TYPE_FIRMWARE,   "firmware",	  "Firmware",		},
-    {	IH_TYPE_KERNEL,	    "kernel",	  "Kernel Image",	},
-    {	IH_TYPE_MULTI,	    "multi",	  "Multi-File Image",	},
-    {	IH_TYPE_RAMDISK,    "ramdisk",	  "RAMDisk Image",	},
-    {	IH_TYPE_SCRIPT,     "script",	  "Script",		},
-    {	IH_TYPE_STANDALONE, "standalone", "Standalone Program", },
-    {	IH_TYPE_FLATDT,     "flat_dt",    "Flat Device Tree",	},
-    {	-1,		    "",		  "",			},
-};
-
-table_entry_t comp_name[] = {
-    {	IH_COMP_NONE,	"none",		"uncompressed",		},
-    {	IH_COMP_BZIP2,	"bzip2",	"bzip2 compressed",	},
-    {	IH_COMP_GZIP,	"gzip",		"gzip compressed",	},
-    {	IH_COMP_LZMA,	"lzma",		"lzma compressed",	},
-    {	-1,		"",		"",			},
-};
-
-static	void	copy_file (int, const char *, int);
-static	void	usage	(void);
-static	void	print_header (image_header_t *);
-static	void	print_type (image_header_t *);
-static	char	*put_table_entry (table_entry_t *, char *, int);
-static	char	*put_arch (int);
-static	char	*put_type (int);
-static	char	*put_os   (int);
-static	char	*put_comp (int);
-static	int	get_table_entry (table_entry_t *, char *, char *);
-static	int	get_arch(char *);
-static	int	get_comp(char *);
-static	int	get_os  (char *);
-static	int	get_type(char *);
-
-
-char	*datafile;
-char	*imagefile;
-
-int dflag    = 0;
-int eflag    = 0;
-int lflag    = 0;
-int vflag    = 0;
-int xflag    = 0;
-int opt_os   = IH_OS_LINUX;
-int opt_arch = IH_CPU_PPC;
-int opt_type = IH_TYPE_KERNEL;
-int opt_comp = IH_COMP_GZIP;
-
-image_header_t header;
-image_header_t *hdr = &header;
-
-int
-main (int argc, char **argv)
-{
-	int ifd;
-	uint32_t checksum;
-	uint32_t addr;
-	uint32_t ep;
-	struct stat sbuf;
-	unsigned char *ptr;
-	char *name = "";
-
-	cmdname = *argv;
-
-	addr = ep = 0;
-
-	while (--argc > 0 && **++argv == '-') {
-		while (*++*argv) {
-			switch (**argv) {
-			case 'l':
-				lflag = 1;
-				break;
-			case 'A':
-				if ((--argc <= 0) ||
-				    (opt_arch = get_arch(*++argv)) < 0)
-					usage ();
-				goto NXTARG;
-			case 'C':
-				if ((--argc <= 0) ||
-				    (opt_comp = get_comp(*++argv)) < 0)
-					usage ();
-				goto NXTARG;
-			case 'O':
-				if ((--argc <= 0) ||
-				    (opt_os = get_os(*++argv)) < 0)
-					usage ();
-				goto NXTARG;
-			case 'T':
-				if ((--argc <= 0) ||
-				    (opt_type = get_type(*++argv)) < 0)
-					usage ();
-				goto NXTARG;
-
-			case 'a':
-				if (--argc <= 0)
-					usage ();
-				addr = strtoul (*++argv, (char **)&ptr, 16);
-				if (*ptr) {
-					fprintf (stderr,
-						"%s: invalid load address %s\n",
-						cmdname, *argv);
-					exit (EXIT_FAILURE);
-				}
-				goto NXTARG;
-			case 'd':
-				if (--argc <= 0)
-					usage ();
-				datafile = *++argv;
-				dflag = 1;
-				goto NXTARG;
-			case 'e':
-				if (--argc <= 0)
-					usage ();
-				ep = strtoul (*++argv, (char **)&ptr, 16);
-				if (*ptr) {
-					fprintf (stderr,
-						"%s: invalid entry point %s\n",
-						cmdname, *argv);
-					exit (EXIT_FAILURE);
-				}
-				eflag = 1;
-				goto NXTARG;
-			case 'n':
-				if (--argc <= 0)
-					usage ();
-				name = *++argv;
-				goto NXTARG;
-			case 'v':
-				vflag++;
-				break;
-			case 'x':
-				xflag++;
-				break;
-			default:
-				usage ();
-			}
-		}
-NXTARG:		;
-	}
-
-	if ((argc != 1) || ((lflag ^ dflag) == 0))
-		usage();
-
-	if (!eflag) {
-		ep = addr;
-		/* If XIP, entry point must be after the U-Boot header */
-		if (xflag)
-			ep += sizeof(image_header_t);
-	}
-
-	/*
-	 * If XIP, ensure the entry point is equal to the load address plus
-	 * the size of the U-Boot header.
-	 */
-	if (xflag) {
-		if (ep != addr + sizeof(image_header_t)) {
-			fprintf (stderr,
-				"%s: For XIP, the entry point must be the load addr + %lu\n",
-				cmdname,
-				(unsigned long)sizeof(image_header_t));
-			exit (EXIT_FAILURE);
-		}
-	}
-
-	imagefile = *argv;
-
-	if (lflag) {
-		ifd = open(imagefile, O_RDONLY|O_BINARY);
-	} else {
-		ifd = open(imagefile, O_RDWR|O_CREAT|O_TRUNC|O_BINARY, 0666);
-	}
-
-	if (ifd < 0) {
-		fprintf (stderr, "%s: Can't open %s: %s\n",
-			cmdname, imagefile, strerror(errno));
-		exit (EXIT_FAILURE);
-	}
-
-	if (lflag) {
-		int len;
-		char *data;
-		/*
-		 * list header information of existing image
-		 */
-		if (fstat(ifd, &sbuf) < 0) {
-			fprintf (stderr, "%s: Can't stat %s: %s\n",
-				cmdname, imagefile, strerror(errno));
-			exit (EXIT_FAILURE);
-		}
-
-		if ((unsigned)sbuf.st_size < sizeof(image_header_t)) {
-			fprintf (stderr,
-				"%s: Bad size: \"%s\" is no valid image\n",
-				cmdname, imagefile);
-			exit (EXIT_FAILURE);
-		}
-
-		ptr = (unsigned char *)mmap(0, sbuf.st_size,
-					    PROT_READ, MAP_SHARED, ifd, 0);
-		if ((caddr_t)ptr == (caddr_t)-1) {
-			fprintf (stderr, "%s: Can't read %s: %s\n",
-				cmdname, imagefile, strerror(errno));
-			exit (EXIT_FAILURE);
-		}
-
-		/*
-		 * create copy of header so that we can blank out the
-		 * checksum field for checking - this can't be done
-		 * on the PROT_READ mapped data.
-		 */
-		memcpy (hdr, ptr, sizeof(image_header_t));
-
-		if (ntohl(hdr->ih_magic) != IH_MAGIC) {
-			fprintf (stderr,
-				"%s: Bad Magic Number: \"%s\" is no valid image\n",
-				cmdname, imagefile);
-			exit (EXIT_FAILURE);
-		}
-
-		data = (char *)hdr;
-		len  = sizeof(image_header_t);
-
-		checksum = ntohl(hdr->ih_hcrc);
-		hdr->ih_hcrc = htonl(0);	/* clear for re-calculation */
-
-		if (crc32 (0, data, len) != checksum) {
-			fprintf (stderr,
-				"%s: ERROR: \"%s\" has bad header checksum!\n",
-				cmdname, imagefile);
-			exit (EXIT_FAILURE);
-		}
-
-		data = (char *)(ptr + sizeof(image_header_t));
-		len  = sbuf.st_size - sizeof(image_header_t) ;
-
-		if (crc32 (0, data, len) != ntohl(hdr->ih_dcrc)) {
-			fprintf (stderr,
-				"%s: ERROR: \"%s\" has corrupted data!\n",
-				cmdname, imagefile);
-			exit (EXIT_FAILURE);
-		}
-
-		/* for multi-file images we need the data part, too */
-		print_header ((image_header_t *)ptr);
-
-		(void) munmap((void *)ptr, sbuf.st_size);
-		(void) close (ifd);
-
-		exit (EXIT_SUCCESS);
-	}
-
-	/*
-	 * Must be -w then:
-	 *
-	 * write dummy header, to be fixed later
-	 */
-	memset (hdr, 0, sizeof(image_header_t));
-
-	if (write(ifd, hdr, sizeof(image_header_t)) != sizeof(image_header_t)) {
-		fprintf (stderr, "%s: Write error on %s: %s\n",
-			cmdname, imagefile, strerror(errno));
-		exit (EXIT_FAILURE);
-	}
-
-	if (opt_type == IH_TYPE_MULTI || opt_type == IH_TYPE_SCRIPT) {
-		char *file = datafile;
-		uint32_t size;
-
-		for (;;) {
-			char *sep = NULL;
-
-			if (file) {
-				if ((sep = strchr(file, ':')) != NULL) {
-					*sep = '\0';
-				}
-
-				if (stat (file, &sbuf) < 0) {
-					fprintf (stderr, "%s: Can't stat %s: %s\n",
-						cmdname, file, strerror(errno));
-					exit (EXIT_FAILURE);
-				}
-				size = htonl(sbuf.st_size);
-			} else {
-				size = 0;
-			}
-
-			if (write(ifd, (char *)&size, sizeof(size)) != sizeof(size)) {
-				fprintf (stderr, "%s: Write error on %s: %s\n",
-					cmdname, imagefile, strerror(errno));
-				exit (EXIT_FAILURE);
-			}
-
-			if (!file) {
-				break;
-			}
-
-			if (sep) {
-				*sep = ':';
-				file = sep + 1;
-			} else {
-				file = NULL;
-			}
-		}
-
-		file = datafile;
-
-		for (;;) {
-			char *sep = strchr(file, ':');
-			if (sep) {
-				*sep = '\0';
-				copy_file (ifd, file, 1);
-				*sep++ = ':';
-				file = sep;
-			} else {
-				copy_file (ifd, file, 0);
-				break;
-			}
-		}
-	} else {
-		copy_file (ifd, datafile, 0);
-	}
-
-	/* We're a bit of paranoid */
-#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__)
-	(void) fdatasync (ifd);
-#else
-	(void) fsync (ifd);
-#endif
-
-	if (fstat(ifd, &sbuf) < 0) {
-		fprintf (stderr, "%s: Can't stat %s: %s\n",
-			cmdname, imagefile, strerror(errno));
-		exit (EXIT_FAILURE);
-	}
-
-	ptr = (unsigned char *)mmap(0, sbuf.st_size,
-				    PROT_READ|PROT_WRITE, MAP_SHARED, ifd, 0);
-	if (ptr == (unsigned char *)MAP_FAILED) {
-		fprintf (stderr, "%s: Can't map %s: %s\n",
-			cmdname, imagefile, strerror(errno));
-		exit (EXIT_FAILURE);
-	}
-
-	hdr = (image_header_t *)ptr;
-
-	checksum = crc32 (0,
-			  (const char *)(ptr + sizeof(image_header_t)),
-			  sbuf.st_size - sizeof(image_header_t)
-			 );
-
-	/* Build new header */
-	hdr->ih_magic = htonl(IH_MAGIC);
-	hdr->ih_time  = htonl(sbuf.st_mtime);
-	hdr->ih_size  = htonl(sbuf.st_size - sizeof(image_header_t));
-	hdr->ih_load  = htonl(addr);
-	hdr->ih_ep    = htonl(ep);
-	hdr->ih_dcrc  = htonl(checksum);
-	hdr->ih_os    = opt_os;
-	hdr->ih_arch  = opt_arch;
-	hdr->ih_type  = opt_type;
-	hdr->ih_comp  = opt_comp;
-
-	strncpy((char *)hdr->ih_name, name, IH_NMLEN);
-
-	checksum = crc32(0,(const char *)hdr,sizeof(image_header_t));
-
-	hdr->ih_hcrc = htonl(checksum);
-
-	print_header (hdr);
-
-	(void) munmap((void *)ptr, sbuf.st_size);
-
-	/* We're a bit of paranoid */
-#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__)
-	(void) fdatasync (ifd);
-#else
-	(void) fsync (ifd);
-#endif
-
-	if (close(ifd)) {
-		fprintf (stderr, "%s: Write error on %s: %s\n",
-			cmdname, imagefile, strerror(errno));
-		exit (EXIT_FAILURE);
-	}
-
-	exit (EXIT_SUCCESS);
-}
-
-static void
-copy_file (int ifd, const char *datafile, int pad)
-{
-	int dfd;
-	struct stat sbuf;
-	unsigned char *ptr;
-	int tail;
-	int zero = 0;
-	int offset = 0;
-	int size;
-
-	if (vflag) {
-		fprintf (stderr, "Adding Image %s\n", datafile);
-	}
-
-	if ((dfd = open(datafile, O_RDONLY|O_BINARY)) < 0) {
-		fprintf (stderr, "%s: Can't open %s: %s\n",
-			cmdname, datafile, strerror(errno));
-		exit (EXIT_FAILURE);
-	}
-
-	if (fstat(dfd, &sbuf) < 0) {
-		fprintf (stderr, "%s: Can't stat %s: %s\n",
-			cmdname, datafile, strerror(errno));
-		exit (EXIT_FAILURE);
-	}
-
-	ptr = (unsigned char *)mmap(0, sbuf.st_size,
-				    PROT_READ, MAP_SHARED, dfd, 0);
-	if (ptr == (unsigned char *)MAP_FAILED) {
-		fprintf (stderr, "%s: Can't read %s: %s\n",
-			cmdname, datafile, strerror(errno));
-		exit (EXIT_FAILURE);
-	}
-
-	if (xflag) {
-		unsigned char *p = NULL;
-		/*
-		 * XIP: do not append the image_header_t at the
-		 * beginning of the file, but consume the space
-		 * reserved for it.
-		 */
-
-		if ((unsigned)sbuf.st_size < sizeof(image_header_t)) {
-			fprintf (stderr,
-				"%s: Bad size: \"%s\" is too small for XIP\n",
-				cmdname, datafile);
-			exit (EXIT_FAILURE);
-		}
-
-		for (p=ptr; p < ptr+sizeof(image_header_t); p++) {
-			if ( *p != 0xff ) {
-				fprintf (stderr,
-					"%s: Bad file: \"%s\" has invalid buffer for XIP\n",
-					cmdname, datafile);
-				exit (EXIT_FAILURE);
-			}
-		}
-
-		offset = sizeof(image_header_t);
-	}
-
-	size = sbuf.st_size - offset;
-	if (write(ifd, ptr + offset, size) != size) {
-		fprintf (stderr, "%s: Write error on %s: %s\n",
-			cmdname, imagefile, strerror(errno));
-		exit (EXIT_FAILURE);
-	}
-
-	if (pad && ((tail = size % 4) != 0)) {
-
-		if (write(ifd, (char *)&zero, 4-tail) != 4-tail) {
-			fprintf (stderr, "%s: Write error on %s: %s\n",
-				cmdname, imagefile, strerror(errno));
-			exit (EXIT_FAILURE);
-		}
-	}
-
-	(void) munmap((void *)ptr, sbuf.st_size);
-	(void) close (dfd);
-}
-
-void
-usage ()
-{
-	fprintf (stderr, "Usage: %s -l image\n"
-			 "          -l ==> list image header information\n"
-			 "       %s [-x] -A arch -O os -T type -C comp "
-			 "-a addr -e ep -n name -d data_file[:data_file...] image\n",
-		cmdname, cmdname);
-	fprintf (stderr, "          -A ==> set architecture to 'arch'\n"
-			 "          -O ==> set operating system to 'os'\n"
-			 "          -T ==> set image type to 'type'\n"
-			 "          -C ==> set compression type 'comp'\n"
-			 "          -a ==> set load address to 'addr' (hex)\n"
-			 "          -e ==> set entry point to 'ep' (hex)\n"
-			 "          -n ==> set image name to 'name'\n"
-			 "          -d ==> use image data from 'datafile'\n"
-			 "          -x ==> set XIP (execute in place)\n"
-		);
-	exit (EXIT_FAILURE);
-}
-
-static void
-print_header (image_header_t *hdr)
-{
-	time_t timestamp;
-	uint32_t size;
-
-	timestamp = (time_t)ntohl(hdr->ih_time);
-	size = ntohl(hdr->ih_size);
-
-	printf ("Image Name:   %.*s\n", IH_NMLEN, hdr->ih_name);
-	printf ("Created:      %s", ctime(&timestamp));
-	printf ("Image Type:   "); print_type(hdr);
-	printf ("Data Size:    %d Bytes = %.2f kB = %.2f MB\n",
-		size, (double)size / 1.024e3, (double)size / 1.048576e6 );
-	printf ("Load Address: 0x%08X\n", ntohl(hdr->ih_load));
-	printf ("Entry Point:  0x%08X\n", ntohl(hdr->ih_ep));
-
-	if (hdr->ih_type == IH_TYPE_MULTI || hdr->ih_type == IH_TYPE_SCRIPT) {
-		int i, ptrs;
-		uint32_t pos;
-		uint32_t *len_ptr = (uint32_t *) (
-					(unsigned long)hdr + sizeof(image_header_t)
-				);
-
-		/* determine number of images first (to calculate image offsets) */
-		for (i=0; len_ptr[i]; ++i)	/* null pointer terminates list */
-			;
-		ptrs = i;		/* null pointer terminates list */
-
-		pos = sizeof(image_header_t) + ptrs * sizeof(long);
-		printf ("Contents:\n");
-		for (i=0; len_ptr[i]; ++i) {
-			size = ntohl(len_ptr[i]);
-
-			printf ("   Image %d: %8d Bytes = %4d kB = %d MB\n",
-				i, size, size>>10, size>>20);
-			if (hdr->ih_type == IH_TYPE_SCRIPT && i > 0) {
-				/*
-				 * the user may need to know offsets
-				 * if planning to do something with
-				 * multiple files
-				 */
-				printf ("    Offset = %08X\n", pos);
-			}
-			/* copy_file() will pad the first files to even word align */
-			size += 3;
-			size &= ~3;
-			pos += size;
-		}
-	}
-}
-
-
-static void
-print_type (image_header_t *hdr)
-{
-	printf ("%s %s %s (%s)\n",
-		put_arch (hdr->ih_arch),
-		put_os   (hdr->ih_os  ),
-		put_type (hdr->ih_type),
-		put_comp (hdr->ih_comp)
-	);
-}
-
-static char *put_arch (int arch)
-{
-	return (put_table_entry(arch_name, "Unknown Architecture", arch));
-}
-
-static char *put_os (int os)
-{
-	return (put_table_entry(os_name, "Unknown OS", os));
-}
-
-static char *put_type (int type)
-{
-	return (put_table_entry(type_name, "Unknown Image", type));
-}
-
-static char *put_comp (int comp)
-{
-	return (put_table_entry(comp_name, "Unknown Compression", comp));
-}
-
-static char *put_table_entry (table_entry_t *table, char *msg, int type)
-{
-	for (; table->val>=0; ++table) {
-		if (table->val == type)
-			return (table->lname);
-	}
-	return (msg);
-}
-
-static int get_arch(char *name)
-{
-	return (get_table_entry(arch_name, "CPU", name));
-}
-
-
-static int get_comp(char *name)
-{
-	return (get_table_entry(comp_name, "Compression", name));
-}
-
-
-static int get_os (char *name)
-{
-	return (get_table_entry(os_name, "OS", name));
-}
-
-
-static int get_type(char *name)
-{
-	return (get_table_entry(type_name, "Image", name));
-}
-
-static int get_table_entry (table_entry_t *table, char *msg, char *name)
-{
-	table_entry_t *t;
-	int first = 1;
-
-	for (t=table; t->val>=0; ++t) {
-		if (t->sname && strcasecmp(t->sname, name)==0)
-			return (t->val);
-	}
-	fprintf (stderr, "\nInvalid %s Type - valid names are", msg);
-	for (t=table; t->val>=0; ++t) {
-		if (t->sname == NULL)
-			continue;
-		fprintf (stderr, "%c %s", (first) ? ':' : ',', t->sname);
-		first = 0;
-	}
-	fprintf (stderr, "\n");
-	return (-1);
-}

+ 15 - 8
package/u-boot/Makefile

@@ -4,27 +4,34 @@
 include $(ADK_TOPDIR)/rules.mk
 
 PKG_NAME:=		u-boot
-PKG_VERSION:=		2014.01
+PKG_VERSION:=		2014.07
 PKG_RELEASE:=		1
-PKG_MD5SUM:=		e531307578f6d32a7ccb1d04f1e08cbc
+PKG_MD5SUM:=		36d4bad687edcafa396fee607e505d4e
 PKG_DESCR:=		bootloader
 PKG_SECTION:=		base/boot
 PKG_URL:=		http://www.denx.de/wiki/U-Boot	
 PKG_SITES:=		ftp://ftp.denx.de/pub/u-boot/
 
 DISTFILES:=		${PKG_NAME}-${PKG_VERSION}.tar.bz2
-PKG_CFLINE_U_BOOT:=	depends on ADK_BROKEN
 PKG_SYSTEM_DEPENDS:=	!cubox-i
 
+PKG_CFLINE_U_BOOT:=	depends on ADK_HOST_ONLY
+
+include $(ADK_TOPDIR)/mk/host.mk
 include $(ADK_TOPDIR)/mk/package.mk
 
-$(eval $(call PKG_template,U_BOOT,u-boot,$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION}))
+$(eval $(call HOST_template,U_BOOT,u-boot,$(PKG_VERSION)-${PKG_RELEASE}))
 
-CONFIG_STYLE:=		manual
+HOST_STYLE:=		manual
+HOST_MAKE_FLAGS+=	HOST_TOOLS_ONLY=yes
 
-do-configure:
-	echo "no config for your target available"
+host-build:
+	(cd ${WRKBUILD} && env ${HOST_MAKE_ENV} ${MAKE} -f ${MAKE_FILE} \
+		${HOST_MAKE_FLAGS} tools $(MAKE_TRACE) )
 
-u-boot-install:
+u-boot-hostinstall:
+	${INSTALL_BIN} ${WRKBUILD}/tools/mkimage \
+		${STAGING_HOST_DIR}/usr/bin
 
+include ${ADK_TOPDIR}/mk/host-bottom.mk
 include ${ADK_TOPDIR}/mk/pkg-bottom.mk

+ 45 - 0
package/u-boot/patches/patch-Kbuild

@@ -0,0 +1,45 @@
+Sometimes it is required to build only host U-Boot tools without building
+U-Boot itself for either board.
+
+For example:
+ * In "buildroot" "uboot-tools" could be built for host just to have an ability
+   to create uImage.
+ * Linux distributions ship "mkimage" utility as a separate substance.
+
+This patch allows building host U-Boot tools separately from U-Boot itself and
+what is more important user only needs to have host compiler (gcc).
+
+To build host tools just execute:
+=====
+make tools HOST_TOOLS_ONLY=yes
+=====
+
+Without this patch to generate tools user needs:
+ 1. Configure any existing board with "make XXX_config"
+ 2. Execute tools building but still cross-compiler will be invoked and if
+    there's no proper cross-compiler in PATH compilation will fail.
+
+Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
+
+Cc: Masahiro Yamada <yamada.m at jp.panasonic.com>
+Cc: Tom Rini <trini at ti.com>
+Cc: Simon Glass <sjg at chromium.org>
+
+--- u-boot-2014.07.orig/Kbuild	2014-07-14 19:16:45.000000000 +0200
++++ u-boot-2014.07/Kbuild	2014-08-11 10:06:13.311946939 +0200
+@@ -4,6 +4,9 @@
+ # 1) Generate generic-asm-offsets.h
+ # 2) Generate asm-offsets.h
+ 
++# Don't execute target below if building host tools only
++ifneq ($(HOST_TOOLS_ONLY),yes)
++
+ #####
+ # 1) Generate generic-asm-offsets.h
+ 
+@@ -85,3 +88,5 @@ arch/$(ARCH)/lib/asm-offsets.s: arch/$(A
+ 
+ $(obj)/$(offsets-file): arch/$(ARCH)/lib/asm-offsets.s Kbuild
+ 	$(call cmd,offsets)
++
++endif

+ 57 - 0
package/u-boot/patches/patch-Makefile

@@ -0,0 +1,57 @@
+Sometimes it is required to build only host U-Boot tools without building
+U-Boot itself for either board.
+
+For example:
+ * In "buildroot" "uboot-tools" could be built for host just to have an ability
+   to create uImage.
+ * Linux distributions ship "mkimage" utility as a separate substance.
+
+This patch allows building host U-Boot tools separately from U-Boot itself and
+what is more important user only needs to have host compiler (gcc).
+
+To build host tools just execute:
+=====
+make tools HOST_TOOLS_ONLY=yes
+=====
+
+Without this patch to generate tools user needs:
+ 1. Configure any existing board with "make XXX_config"
+ 2. Execute tools building but still cross-compiler will be invoked and if
+    there's no proper cross-compiler in PATH compilation will fail.
+
+Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
+
+Cc: Masahiro Yamada <yamada.m at jp.panasonic.com>
+Cc: Tom Rini <trini at ti.com>
+Cc: Simon Glass <sjg at chromium.org>
+
+--- u-boot-2014.07.orig/Makefile	2014-07-14 19:16:45.000000000 +0200
++++ u-boot-2014.07/Makefile	2014-08-11 10:06:13.315946952 +0200
+@@ -483,9 +483,12 @@ ifeq ($(dot-config),1)
+ # load other configuration
+ include $(srctree)/config.mk
+ 
++# Don't check for config.mk presence if building host tools only
++ifneq ($(HOST_TOOLS_ONLY),yes)
+ ifeq ($(wildcard include/config.mk),)
+ $(error "System not configured - see README")
+ endif
++endif
+ 
+ # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
+ # that (or fail if absent).  Otherwise, search for a linker script in a
+@@ -1055,10 +1058,14 @@ ifeq ($(CONFIG_SYS_GENERIC_BOARD),y)
+ 	@/bin/false
+ endif
+ endif
++
++# Don't check for ldscript presence if building host tools only
++ifneq ($(HOST_TOOLS_ONLY),yes)
+ ifeq ($(wildcard $(LDSCRIPT)),)
+ 	@echo >&2 "  Could not find linker script."
+ 	@/bin/false
+ endif
++endif
+ 
+ archprepare: prepare1 scripts_basic
+ 

+ 1 - 0
target/config/Config.in.tools

@@ -149,6 +149,7 @@ config ADK_HOST_NEED_MKIMAGE
 
 config ADK_HOST_BUILD_MKIMAGE
 	boolean
+	select ADK_PACKAGE_U_BOOT
 	default y if ADK_HOST_NEED_MKIMAGE
 	default n
 

+ 1 - 1
target/xtensa/Makefile

@@ -7,7 +7,7 @@ include $(ADK_TOPDIR)/mk/modules.mk
 include $(ADK_TOPDIR)/mk/kernel-build.mk
 include $(ADK_TOPDIR)/mk/image.mk
 
-KERNEL:=$(LINUX_DIR)/arch/xtensa/boot/Image.elf
+KERNEL:=$(LINUX_DIR)/arch/xtensa/boot/uImage
 
 QEMU_ARGS:=-M lx60 -cpu dc232b -monitor null
 QEMU_ARGS+=${ADK_QEMU_ARGS}