Merge branch 'master' of git+ssh://openadk.org/git/openadk

mk/modules.mk

@@ -926,13 +926,7 @@ $(eval $(call KMOD_template,CRYPTO_FCRYPT,crypto-fcrypt,\
 ,11))
 
 ZLIB:=lib/zlib_deflate/zlib_deflate
-ifeq ($(ADK_TARGET_SYSTEM_FOXBOARD_LX832),y)
-ifeq ($(ADK_TARGET_SYSTEM_FOXBOARD_LX416),y)
-ifeq ($(ADK_TARGET_SYSTEM_LINKSYS_AG241),y)
 ZLIB+=lib/zlib_inflate/zlib_inflate
-endif
-endif
-endif
 
 $(eval $(call KMOD_template,CRYPTO_DEFLATE,crypto-deflate,\
     $(foreach mod, $(ZLIB),$(MODULES_DIR)/kernel/$(mod)) \

package/asterisk/Makefile

@@ -166,10 +166,10 @@ do-install:
 
 asterisk-pgsql-install:
 	${INSTALL_DIR} $(IDIR_ASTERISK_PGSQL)/etc/asterisk
-	${INSTALL_DATA} $(WRKBUILD)/configs/cdr_pgsql.conf.sample \
-		$(IDIR_ASTERISK_PGSQL)/etc/asterisk/cdr_pgsql.conf
+	${INSTALL_DATA} $(WRKINST)/etc/asterisk/cdr_pgsql.conf \
+		$(IDIR_ASTERISK_PGSQL)/etc/asterisk/
 	${INSTALL_DIR} $(IDIR_ASTERISK_PGSQL)/usr/lib/asterisk/modules
-	${INSTALL_BIN} $(WRKBUILD)/cdr/cdr_pgsql.so \
+	${INSTALL_BIN} $(WRKINST)/usr/lib/asterisk/modules/cdr_pgsql.so \
 		$(IDIR_ASTERISK_PGSQL)/usr/lib/asterisk/modules/
 
 asterisk-sounds-install:

package/base-files/src/etc/network/if-pre-up.d/02-vlan

@@ -1,12 +1,18 @@
 #!/bin/sh
 
-[ -x /sbin/vconfig ] || exit 0
-[ -d /proc/net/vlan ] || exit 0
+which vconfig || {
+	echo "vconfig executable not found, aborting"
+	exit 0
+}
+[ -d /proc/net/vlan ] || {
+	echo "no kernel support for 802.1q found, aborting"
+	exit 0
+}
 
 case "$IFACE" in
         vlan*)
-               	vconfig set_name_type VLAN_PLUS_VID_NO_PAD
-               	VLANID=`echo $IFACE|sed "s/vlan*//"`
+		vconfig set_name_type VLAN_PLUS_VID_NO_PAD
+		VLANID=`echo $IFACE|sed "s/vlan*//"`
 		;;
 	eth*.*)
 		vconfig set_name_type DEV_PLUS_VID_NO_PAD

package/netcat/Makefile

@@ -0,0 +1,25 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		netcat
+PKG_VERSION:=		0.7.1
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		088def25efe04dcdd1f8369d8926ab34
+PKG_DESCR:=		the GNU network swiss army knife
+PKG_SECTION:=		net/misc
+PKG_URL:=		http://netcat.sourceforge.net/
+PKG_SITES:=		${MASTER_SITE_SOURCEFORGE:=netcat/}
+
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call PKG_template,NETCAT,$(PKG_NAME),$(PKG_VERSION)-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION}))
+
+post-install:
+	$(INSTALL_DIR) $(IDIR_NETCAT)/usr/bin
+	$(INSTALL_BIN) $(WRKINST)/usr/bin/netcat \
+		$(IDIR_NETCAT)/usr/bin
+
+# please remove ALL above comments, before commiting
+include ${TOPDIR}/mk/pkg-bottom.mk

package/tcpdump/Makefile

@@ -5,7 +5,7 @@ include ${TOPDIR}/rules.mk
 
 PKG_NAME:=		tcpdump
 PKG_VERSION:=		4.1.1
-PKG_RELEASE:=		1
+PKG_RELEASE:=		2
 PKG_MD5SUM:=		d0dd58bbd6cd36795e05c6f1f74420b0
 PKG_DESCR:=		A tool for network monitoring and data acquisition
 PKG_SECTION:=		net
@@ -32,7 +32,7 @@ else
 CONFIGURE_ARGS+=	--disable-ipv6
 endif
 ifneq (${ADK_PACKAGE_TCPDUMP_WITH_CHROOT},)
-CONFIGURE_ARGS+=	--with-chroot="/var/lib/tcpdump"
+CONFIGURE_ARGS+=	--with-chroot="/var/lib/tcpdump" --with-user="nobody"
 endif
 XAKE_FLAGS+=		CCOPT="${TARGET_CFLAGS}" \
 			INCLS="-I. -I${STAGING_TARGET_DIR}/usr/include"

package/totd/Makefile

@@ -0,0 +1,24 @@
+# This file is part of the OpenADK project. OpenADK is copyrighted
+# material, please see the LICENCE file in the top-level directory.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=		totd
+PKG_VERSION:=		1.5.1
+PKG_RELEASE:=		1
+PKG_MD5SUM:=		7edaedae9f6aca5912dd6c123582cf08
+PKG_DESCR:=		Trick or Treat Daemon (a simple DNS-ALG for NAT-PT)
+PKG_SECTION:=		dns
+PKG_URL:=		http://www.dillema.net/software/totd.html
+PKG_SITES:=		http://www.dillema.net/software/totd/
+
+include $(TOPDIR)/mk/package.mk
+
+$(eval $(call PKG_template,TOTD,${PKG_NAME},${PKG_VERSION}-${PKG_RELEASE},${PKG_DEPENDS},${PKG_DESCR},${PKG_SECTION}))
+
+post-install:
+	$(INSTALL_DIR) $(IDIR_TOTD)/{usr/sbin,etc}
+	${INSTALL_DATA} ./files/totd.conf ${IDIR_TOTD}/etc/
+	$(INSTALL_BIN) $(WRKINST)/usr/sbin/totd $(IDIR_TOTD)/usr/sbin/
+
+include ${TOPDIR}/mk/pkg-bottom.mk

package/totd/files/totd.conf

@@ -0,0 +1,14 @@
+; you can have multiple forwarders, totd will always prefer
+; forwarders listed early and only use forwarders listed later
+; if the first ones are unresponsive.
+forwarder ::1
+
+; you can have multiple prefixes or even no prefixes at all
+; totd uses them in round-robin fashion
+prefix 0::ffff:ffff:0:0
+
+; the port totd listens on for incoming requests
+port 53
+
+; the pidfile to use (default: /var/run/totd.pid)
+pidfile /var/run/totd.pid

package/totd/files/totd.conffiles

@@ -0,0 +1 @@
+/etc/totd.conf

package/totd/files/totd.init

@@ -0,0 +1,26 @@
+#!/bin/sh
+#PKG totd
+#INIT 60
+. /etc/rc.conf
+
+case $1 in
+autostop) ;;
+autostart)
+	test x"${totd:-NO}" = x"NO" && exit 0
+	exec sh $0 start
+	;;
+start)
+	totd $totd_flags -c /etc/totd.conf
+	;;
+stop)
+	pkill totd
+	;;
+restart)
+	sh $0 stop
+	sh $0 start
+	;;
+*)
+	echo "Usage: $0 {start | stop | restart}"
+	;;
+esac
+exit $?

package/totd/files/totd.postinst

@@ -0,0 +1,4 @@
+#!/bin/sh
+. $IPKG_INSTROOT/etc/functions.sh
+add_rcconf 'additional flags for totd' totd_flags "-q"
+add_rcconf totd totd NO

package/totd/patches/patch-Makefile_in

@@ -0,0 +1,39 @@
+	- set ${CC} only if unset
+	- drop -Werror, sources aren't that sane ;)
+	- don't chown the files when installing
+	- use DESTDIR when installing
+	- don't strip binaries (we do ourself, install chooses the wrong strip binary)
+	- create non-existing target directories
+--- totd-1.5.orig/Makefile.in	2005-01-31 12:55:14.000000000 +0100
++++ totd-1.5/Makefile.in	2010-03-25 21:21:05.085663745 +0100
+@@ -4,7 +4,7 @@
+ # <$Id: Makefile.in,v 3.43 2005/01/31 11:55:14 dillema Exp $>
+ #
+ 
+-CC = gcc
++CC ?= gcc
+ 
+ # These use the standard autoconf variables, which by default are
+ # rooted in @prefix@
+@@ -19,7 +19,7 @@ TOT_CONFIG_FILE=@sysconfdir@/totd.conf
+ 
+ INSTALL = /usr/bin/install
+ 
+-CFLAGS  = @CFLAGS@ @DEFS@  -Werror -Wall -DTOTCONF=\"$(TOT_CONFIG_FILE)\" @OPTFLAGS@ $(INCLUDEPATH)
++CFLAGS  = @CFLAGS@ @DEFS@  -Wall -DTOTCONF=\"$(TOT_CONFIG_FILE)\" @OPTFLAGS@ $(INCLUDEPATH)
+ 
+ # When debugging is enabled by --enable-malloc-debug flag to the configure
+ # script, the @DBMALLOC@ substitution will contain the empty string, thus
+@@ -66,8 +66,10 @@ libswill.a:	
+ 	-ranlib libswill.a
+ 
+ install: $(PROG)
+-	$(INSTALL) -c -s -m 0555 -o bin -g bin $(PROG) $(INSTALLDIR)
+-	$(INSTALL) -c -m 0444 -o root -g wheel $(MAN) $(INSTALLMAN)/man8
++	mkdir -p ${DESTDIR}/${INSTALLDIR}
++	$(INSTALL) -c -m 0555 $(PROG) ${DESTDIR}/$(INSTALLDIR)
++	mkdir -p ${DESTDIR}/${INSTALLMAN}/man8
++	$(INSTALL) -c -m 0444 $(MAN) ${DESTDIR}/$(INSTALLMAN)/man8
+ 
+ lint:
+ 	lint ${SRCS}

package/totd/patches/patch-ne_mesg_c

@@ -0,0 +1,16 @@
+	fix for verbose logging
+--- totd-1.5.orig/ne_mesg.c	2002-12-10 23:31:18.000000000 +0100
++++ totd-1.5/ne_mesg.c	2010-03-25 23:45:35.185664417 +0100
+@@ -470,6 +470,12 @@ u_char *dname_decompress (u_char *buf, i
+ 
+ 	next = NULL;
+ 	written_len = token_len = 0;
++
++	if (!m_head)
++		m_head = dname;
++	if (!m_tail)
++		m_tail = dname + buflen;
++
+ 	for (cp = dname; *cp; cp += token_len) {
+ 		iter = 0;
+ 	  top:

target/linux/config/Config.in.netfilter

@@ -146,7 +146,6 @@ source target/linux/config/Config.in.netfilter.ip4
 endmenu
 
 menu "IPv6: Netfilter Configuration"
-	depends on ADK_ENABLE_IPV6
 source target/linux/config/Config.in.netfilter.ip6
 endmenu