add flash map driver

target/brcm/Makefile

@@ -7,6 +7,8 @@ include $(TOPDIR)/mk/modules.mk
 include $(TOPDIR)/mk/kernel-build.mk
 include $(TOPDIR)/mk/image.mk
 
+OSTRIP:=-R .reginfo -R .notes -R .note -R .comment -R .mdebug -R .note.gnu.build-id
+
 $(TOOLS_BUILD_DIR):
 	@mkdir -p $(TOOLS_BUILD_DIR)
 
@@ -14,14 +16,17 @@ tools-compile: $(TOOLS_BUILD_DIR)
 	$(MAKE) -C tools/trx
 
 kernel-install: tools-compile
-	gzip -c9 $(LINUX_DIR)/vmlinuz > $(LINUX_DIR)/vmlinuz.gz
-	PATH='${TARGET_PATH}' trx -o $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel \
-		$(LINUX_DIR)/vmlinuz.gz
+	$(TARGET_CROSS)objcopy $(OSTRIP) -S $(LINUX_DIR)/vmlinux \
+		$(LINUX_DIR)/vmlinuz
+	@gzip -c9 $(LINUX_DIR)/vmlinuz > \
+		$(BIN_DIR)/${ADK_TARGET}-${FS}-kernel
 
 ifeq ($(FS),nfsroot)
 imageinstall: $(BIN_DIR)/$(ROOTFSUSERTARBALL)
 	@echo
 	@echo 'The kernel file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel'
 	@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
+	@echo 'Type following on the CFE prompt to boot the kernel:'
+	@echo 'CFE> boot -z -elf -tftp 192.168.1.254:${ADK_TARGET}-${FS}-kernel'
 	@echo 'Login as user root with password linux123 via ssh or console.'
 endif

target/brcm/kernel.config

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33.3
-# Sun May 16 17:01:26 2010
+# Linux kernel version: 2.6.34
+# Sun May 30 15:46:06 2010
 #
 CONFIG_MIPS=y
 
@@ -67,7 +67,7 @@ CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_CFE=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
@@ -103,7 +103,6 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
 # CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
@@ -125,6 +124,7 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -146,7 +146,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 CONFIG_HZ_100=y
@@ -175,14 +175,6 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -203,7 +195,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -214,7 +205,8 @@ CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -308,7 +300,6 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
@@ -335,7 +326,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -417,7 +407,9 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -425,7 +417,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -446,8 +438,10 @@ CONFIG_MTD_BLOCK=y
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -458,6 +452,10 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -466,6 +464,8 @@ CONFIG_MTD_CFI_I2=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_BCM47XX=y
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -484,15 +484,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -529,6 +521,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -539,7 +532,7 @@ CONFIG_SCSI_DMA=y
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_SD is not set
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
@@ -559,118 +552,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -722,6 +607,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 CONFIG_B44=y
 CONFIG_B44_PCI_AUTOSELECT=y
 CONFIG_B44_PCICORE_AUTOSELECT=y
@@ -772,28 +658,7 @@ CONFIG_WLAN=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -814,9 +679,9 @@ CONFIG_INPUT=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -825,6 +690,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -854,7 +720,7 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
-# CONFIG_BCM47XX_WDT is not set
+CONFIG_BCM47XX_WDT=y
 
 #
 # PCI-based Watchdog Cards
@@ -872,7 +738,7 @@ CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
 # CONFIG_SSB_B43_PCI_BRIDGE is not set
 # CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DEBUG=y
 CONFIG_SSB_SERIAL=y
 CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 CONFIG_SSB_DRIVER_PCICORE=y
@@ -889,6 +755,7 @@ CONFIG_SSB_DRIVER_EXTIF=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -907,7 +774,6 @@ CONFIG_SSB_DRIVER_EXTIF=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1007,17 +873,9 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+# CONFIG_YAFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1032,6 +890,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1092,10 +951,19 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1113,7 +981,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_CBC is not set
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_ECB=y
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_XTS is not set
@@ -1146,9 +1014,9 @@ CONFIG_CRYPTO=y
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set

target/brcm/patches/flash-map.patch

@@ -0,0 +1,433 @@
+diff -Nur linux-2.6.34.orig/drivers/mtd/maps/bcm47xx-flash.c linux-2.6.34/drivers/mtd/maps/bcm47xx-flash.c
+--- linux-2.6.34.orig/drivers/mtd/maps/bcm47xx-flash.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.34/drivers/mtd/maps/bcm47xx-flash.c	2010-05-30 15:50:20.921614063 +0200
+@@ -0,0 +1,402 @@
++/*
++ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
++ *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
++ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
++ *
++ *  original functions for finding root filesystem from Mike Baker 
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
++ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
++ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
++ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
++ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
++ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
++ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *  You should have received a copy of the  GNU General Public License along
++ *  with this program; if not, write  to the Free Software Foundation, Inc.,
++ *  675 Mass Ave, Cambridge, MA 02139, USA.
++ * 
++ *  Copyright 2001-2003, Broadcom Corporation
++ *  All Rights Reserved.
++ * 
++ *  THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ *  KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ *  SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ *  FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ *  Flash mapping for BCM947XX boards
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/wait.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#ifdef CONFIG_MTD_PARTITIONS
++#include <linux/mtd/partitions.h>
++#endif
++#include <linux/crc32.h>
++#ifdef CONFIG_SSB
++#include <linux/ssb/ssb.h>
++#endif
++#include <asm/io.h>
++
++
++#define TRX_MAGIC	0x30524448	/* "HDR0" */
++#define TRX_VERSION	1
++#define TRX_MAX_LEN	0x3A0000
++#define TRX_NO_HEADER	1		/* Do not write TRX header */	
++#define TRX_GZ_FILES	0x2     /* Contains up to TRX_MAX_OFFSET individual gzip files */
++#define TRX_MAX_OFFSET	3
++
++struct trx_header {
++	u32 magic;		/* "HDR0" */
++	u32 len;		/* Length of file including header */
++	u32 crc32;		/* 32-bit CRC from flag_version to end of file */
++	u32 flag_version;	/* 0:15 flags, 16:31 version */
++	u32 offsets[TRX_MAX_OFFSET];	/* Offsets of partitions from start of header */
++};
++
++#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
++#define NVRAM_SPACE 0x8000
++#define WINDOW_ADDR 0x1fc00000
++#define WINDOW_SIZE 0x400000
++#define BUSWIDTH 2
++
++#ifdef CONFIG_SSB
++extern struct ssb_bus ssb_bcm47xx;
++#endif
++static struct mtd_info *bcm47xx_mtd;
++
++static void bcm47xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
++{
++	if (len==1) {
++		memcpy_fromio(to, map->virt + from, len);
++	} else {
++		int i;
++		u16 *dest = (u16 *) to;
++		u16 *src  = (u16 *) (map->virt + from);
++		for (i = 0; i < (len / 2); i++) {
++			dest[i] = src[i];
++		}
++		if (len & 1)
++			*((u8 *)dest+len-1) = src[i] & 0xff;
++	}
++}
++
++static struct map_info bcm47xx_map = {
++	name: "Physically mapped flash",
++	size: WINDOW_SIZE,
++	bankwidth: BUSWIDTH,
++	phys: WINDOW_ADDR,
++};
++
++#ifdef CONFIG_MTD_PARTITIONS
++
++static struct mtd_partition bcm47xx_parts[] = {
++	{ name: "cfe",	offset: 0, size: 0, mask_flags: MTD_WRITEABLE, },
++	{ name: "linux", offset: 0, size: 0, },
++	{ name: "rootfs", offset: 0, size: 0, },
++	{ name: "nvram", offset: 0, size: 0, },
++	{ name: NULL, },
++};
++
++static int __init
++find_cfe_size(struct mtd_info *mtd, size_t size)
++{
++	struct trx_header *trx;
++	unsigned char buf[512];
++	int off;
++	size_t len;
++	int blocksize;
++
++	trx = (struct trx_header *) buf;
++
++	blocksize = mtd->erasesize;
++	if (blocksize < 0x10000)
++		blocksize = 0x10000;
++
++	for (off = (128*1024); off < size; off += blocksize) {
++		memset(buf, 0xe5, sizeof(buf));
++
++		/*
++		 * Read into buffer 
++		 */
++		if (mtd->read(mtd, off, sizeof(buf), &len, buf) ||
++		    len != sizeof(buf))
++			continue;
++
++		/* found a TRX header */
++		if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
++			goto found;
++		}
++	}
++
++	printk(KERN_NOTICE
++	       "%s: Couldn't find bootloader size\n",
++	       mtd->name);
++	return -1;
++
++ found:
++	printk(KERN_NOTICE "bootloader size: %d\n", off);
++	return off;
++
++}
++
++/*
++ * Copied from mtdblock.c
++ *
++ * Cache stuff...
++ * 
++ * Since typical flash erasable sectors are much larger than what Linux's
++ * buffer cache can handle, we must implement read-modify-write on flash
++ * sectors for each block write requests.  To avoid over-erasing flash sectors
++ * and to speed things up, we locally cache a whole flash sector while it is
++ * being written to until a different sector is required.
++ */
++
++static void erase_callback(struct erase_info *done)
++{
++	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
++	wake_up(wait_q);
++}
++
++static int erase_write (struct mtd_info *mtd, unsigned long pos, 
++			int len, const char *buf)
++{
++	struct erase_info erase;
++	DECLARE_WAITQUEUE(wait, current);
++	wait_queue_head_t wait_q;
++	size_t retlen;
++	int ret;
++
++	/*
++	 * First, let's erase the flash block.
++	 */
++
++	init_waitqueue_head(&wait_q);
++	erase.mtd = mtd;
++	erase.callback = erase_callback;
++	erase.addr = pos;
++	erase.len = len;
++	erase.priv = (u_long)&wait_q;
++
++	set_current_state(TASK_INTERRUPTIBLE);
++	add_wait_queue(&wait_q, &wait);
++
++	ret = mtd->erase(mtd, &erase);
++	if (ret) {
++		set_current_state(TASK_RUNNING);
++		remove_wait_queue(&wait_q, &wait);
++		printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
++				     "on \"%s\" failed\n",
++			pos, len, mtd->name);
++		return ret;
++	}
++
++	schedule();  /* Wait for erase to finish. */
++	remove_wait_queue(&wait_q, &wait);
++
++	/*
++	 * Next, writhe data to flash.
++	 */
++
++	ret = mtd->write (mtd, pos, len, &retlen, buf);
++	if (ret)
++		return ret;
++	if (retlen != len)
++		return -EIO;
++	return 0;
++}
++
++
++
++
++static int __init
++find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part)
++{
++	struct trx_header trx, *trx2;
++	unsigned char buf[512], *block;
++	int off, blocksize;
++	u32 i, crc = ~0;
++	size_t len;
++	struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
++
++	blocksize = mtd->erasesize;
++	if (blocksize < 0x10000)
++		blocksize = 0x10000;
++
++	for (off = (128*1024); off < size; off += blocksize) {
++		memset(&trx, 0xe5, sizeof(trx));
++
++		/*
++		 * Read into buffer 
++		 */
++		if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) ||
++		    len != sizeof(trx))
++			continue;
++
++		/* found a TRX header */
++		if (le32_to_cpu(trx.magic) == TRX_MAGIC) {
++			part->offset = le32_to_cpu(trx.offsets[2]) ? : 
++				le32_to_cpu(trx.offsets[1]);
++			part->size = le32_to_cpu(trx.len); 
++
++			part->size -= part->offset;
++			part->offset += off;
++
++			goto found;
++		}
++	}
++
++	printk(KERN_NOTICE
++	       "%s: Couldn't find root filesystem\n",
++	       mtd->name);
++	return -1;
++
++ found:
++	if (part->size == 0)
++		return 0;
++	
++	if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf))
++		return 0;
++
++	return part->size;
++}
++
++struct mtd_partition * __init
++init_mtd_partitions(struct mtd_info *mtd, size_t size)
++{
++	int cfe_size;
++
++	if ((cfe_size = find_cfe_size(mtd,size)) < 0)
++		return NULL;
++
++	/* boot loader */
++	bcm47xx_parts[0].offset = 0;
++	bcm47xx_parts[0].size   = cfe_size;
++
++	/* nvram */
++	if (cfe_size != 384 * 1024) {
++		bcm47xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize);
++		bcm47xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
++	} else {
++		/* nvram (old 128kb config partition on netgear wgt634u) */
++		bcm47xx_parts[3].offset = bcm47xx_parts[0].size;
++		bcm47xx_parts[3].size   = ROUNDUP(NVRAM_SPACE, mtd->erasesize);
++	}
++
++	/* linux (kernel and rootfs) */
++	if (cfe_size != 384 * 1024) {
++		bcm47xx_parts[1].offset = bcm47xx_parts[0].size;
++		bcm47xx_parts[1].size   = bcm47xx_parts[3].offset - 
++			bcm47xx_parts[1].offset;
++	} else {
++		/* do not count the elf loader, which is on one block */
++		bcm47xx_parts[1].offset = bcm47xx_parts[0].size + 
++			bcm47xx_parts[3].size + mtd->erasesize;
++		bcm47xx_parts[1].size   = size - 
++			bcm47xx_parts[0].size - 
++			(2*bcm47xx_parts[3].size) - 
++			mtd->erasesize;
++	}
++
++	/* find and size rootfs */
++	find_root(mtd,size,&bcm47xx_parts[2]);
++	bcm47xx_parts[2].size = size - bcm47xx_parts[2].offset - bcm47xx_parts[3].size;
++
++	return bcm47xx_parts;
++}
++#endif
++
++int __init init_bcm47xx_map(void)
++{
++#ifdef CONFIG_SSB
++	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
++#endif
++	size_t size;
++	int ret = 0;
++#ifdef CONFIG_MTD_PARTITIONS
++	struct mtd_partition *parts;
++	int i;
++#endif
++
++#ifdef CONFIG_SSB
++	u32 window = mcore->flash_window;
++	u32 window_size = mcore->flash_window_size;
++
++	printk("flash init: 0x%08x 0x%08x\n", window, window_size);
++	bcm47xx_map.phys = window;
++	bcm47xx_map.size = window_size;
++	bcm47xx_map.bankwidth = mcore->flash_buswidth;
++	bcm47xx_map.virt = ioremap_nocache(window, window_size);
++#else
++	printk("flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE);
++	bcm47xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE);
++#endif
++
++	if (!bcm47xx_map.virt) {
++		printk("Failed to ioremap\n");
++		return -EIO;
++	}
++
++	simple_map_init(&bcm47xx_map);
++	
++	if (!(bcm47xx_mtd = do_map_probe("cfi_probe", &bcm47xx_map))) {
++		printk("Failed to do_map_probe\n");
++		iounmap((void *)bcm47xx_map.virt);
++		return -ENXIO;
++	}
++
++	/* override copy_from routine */
++ 	//bcm47xx_map.copy_from = bcm47xx_map_copy_from;
++
++	bcm47xx_mtd->owner = THIS_MODULE;
++
++	size = bcm47xx_mtd->size;
++
++	printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR);
++
++#ifdef CONFIG_MTD_PARTITIONS
++	parts = init_mtd_partitions(bcm47xx_mtd, size);
++	for (i = 0; parts[i].name; i++);
++	ret = add_mtd_partitions(bcm47xx_mtd, parts, i);
++	if (ret) {
++		printk(KERN_ERR "Flash: add_mtd_partitions failed\n");
++		goto fail;
++	}
++#endif
++	return 0;
++
++ fail:
++	if (bcm47xx_mtd)
++		map_destroy(bcm47xx_mtd);
++	if (bcm47xx_map.virt)
++		iounmap((void *)bcm47xx_map.virt);
++	bcm47xx_map.virt = 0;
++	return ret;
++}
++
++void __exit cleanup_bcm47xx_map(void)
++{
++#ifdef CONFIG_MTD_PARTITIONS
++	del_mtd_partitions(bcm47xx_mtd);
++#endif
++	map_destroy(bcm47xx_mtd);
++	iounmap((void *)bcm47xx_map.virt);
++}
++
++module_init(init_bcm47xx_map);
++module_exit(cleanup_bcm47xx_map);
+diff -Nur linux-2.6.34.orig/drivers/mtd/maps/Kconfig linux-2.6.34/drivers/mtd/maps/Kconfig
+--- linux-2.6.34.orig/drivers/mtd/maps/Kconfig	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/drivers/mtd/maps/Kconfig	2010-05-30 15:13:31.141614159 +0200
+@@ -319,6 +319,12 @@
+ 	  Mapping for the Flaga digital module. If you don't have one, ignore
+ 	  this setting.
+ 
++config MTD_BCM47XX
++	tristate "BCM47xx flash device"
++	depends on MIPS && MTD_CFI && BCM47XX
++	help
++	  Support for the flash chips on the BCM947xx board.
++
+ config MTD_REDWOOD
+ 	tristate "CFI Flash devices mapped on IBM Redwood"
+ 	depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
+diff -Nur linux-2.6.34.orig/drivers/mtd/maps/Makefile linux-2.6.34/drivers/mtd/maps/Makefile
+--- linux-2.6.34.orig/drivers/mtd/maps/Makefile	2010-05-16 23:17:36.000000000 +0200
++++ linux-2.6.34/drivers/mtd/maps/Makefile	2010-05-30 15:13:31.141614159 +0200
+@@ -29,6 +29,7 @@
+ obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
+ obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
++obj-$(CONFIG_MTD_BCM47XX)	+= bcm47xx-flash.o
+ obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
+ obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
+ obj-$(CONFIG_MTD_SC520CDP)	+= sc520cdp.o