add support for raspberry pi4 64 bit

package/bcm28xx-bootloader/Makefile

@@ -12,7 +12,7 @@ PKG_SECTION:=		base/boot
 PKG_URL:=		https://github.com/raspberrypi/firmware
 PKG_SITES:=		https://github.com/raspberrypi/firmware.git
 
-PKG_SYSTEM_DEPENDS:=	raspberry-pi raspberry-pi0 raspberry-pi2 raspberry-pi3 raspberry-pi3-64 raspberry-pi4 raspberry-pi3p-64
+PKG_SYSTEM_DEPENDS:=	raspberry-pi raspberry-pi0 raspberry-pi2 raspberry-pi3 raspberry-pi3-64 raspberry-pi4 raspberry-pi4-64
 
 PKG_CHOICES_BCM28XX_BOOTLOADER:=	DEFAULT EXTRA CUTDOWN
 PKGCD_DEFAULT:=		default bootloader
@@ -104,7 +104,7 @@ ifeq ($(ADK_TARGET_HARDWARE_RPI3_SERIAL),y)
 	printf "enable_uart=1\n" >> \
 		$(IDIR_BCM28XX_BOOTLOADER)/boot/config.txt
 endif
-ifeq ($(ADK_TARGET_SYSTEM_RASPBERRY_PI3_64)$(ADK_TARGET_SYSTEM_RASPBERRY_PI3_64),y)
+ifeq ($(ADK_TARGET_SYSTEM_RASPBERRY_PI3_64)$(ADK_TARGET_SYSTEM_RASPBERRY_PI4_64),y)
 	printf "arm_control=0x200\n" >> \
 		$(IDIR_BCM28XX_BOOTLOADER)/boot/config.txt
 	printf "enable_uart=1\n" >> \

package/bcm28xx-vc/Makefile

@@ -26,7 +26,7 @@ PKGSC_BCM28XX_VC_GL_LIBS:=libs/video
 PKGSS_BCM28XX_VC_GL_LIBS:=bcm28xx-vc-libs
 PKGSD_BCM28XX_VC_GL_LIBS:=videocore gl library
 
-PKG_SYSTEM_DEPENDS:=	raspberry-pi raspberry-pi0 raspberry-pi2 raspberry-pi3 raspberry-pi3-64 raspberry-pi4 raspberry-pi3p-64
+PKG_SYSTEM_DEPENDS:=	raspberry-pi raspberry-pi0 raspberry-pi2 raspberry-pi3 raspberry-pi3-64 raspberry-pi4 raspberry-pi4-64
 
 include $(ADK_TOPDIR)/mk/package.mk
 

scripts/install.sh

@@ -1,6 +1,6 @@
 #!/usr/bin/env bash
 #-
-# Copyright © 2010-2019
+# Copyright © 2010-2022
 #	Waldemar Brodkorb <wbx@openadk.org>
 #	Thorsten Glaser <tg@mirbsd.org>
 #
@@ -155,7 +155,7 @@ tgt=$2
 src=$3
 
 case $target {
-(banana-pro|orange-pi0|pcengines-apu|phytec-imx6|phytec-wega|raspberry-pi|raspberry-pi0|raspberry-pi2|raspberry-pi3|raspberry-pi3-64|raspberry-pi4|raspberry-pi3p-64|solidrun-imx6|solidrun-clearfog|default) ;;
+(banana-pro|orange-pi0|pcengines-apu|phytec-imx6|phytec-wega|raspberry-pi|raspberry-pi0|raspberry-pi2|raspberry-pi3|raspberry-pi3-64|raspberry-pi4|raspberry-pi4-64|solidrun-imx6|solidrun-clearfog|default) ;;
 (*)
 	print -u2 "Unknown target '$target', exiting"
 	exit 1 ;;
@@ -178,7 +178,7 @@ case $ostype {
 	basedev=$tgt
 	rootpart=${basedev}s1
 	datapart=${basedev}s2
-	if [[ $target = raspberry-pi || $target = raspberry-pi0 || $target = raspberry-pi2 || $target = raspberry-pi3 || $target = raspberry-pi3-64 || $target = raspberry-pi4 || $target = raspberry-pi3p-64 || $target = phytec-wega ]]; then
+	if [[ $target = raspberry-pi || $target = raspberry-pi0 || $target = raspberry-pi2 || $target = raspberry-pi3 || $target = raspberry-pi3-64 || $target = raspberry-pi4 || $target = raspberry-pi4-64 || $target = phytec-wega ]]; then
 		bootpart=${basedev}s1
 		rootpart=${basedev}s2
 		datapart=${basedev}s3
@@ -229,7 +229,7 @@ case $ostype {
 
 	rootpart=${basedev}${partitionsep}1
 	datapart=${basedev}${partitionsep}2
-	if [[ $target = raspberry-pi || $target = raspberry-pi0 || $target = raspberry-pi2 || $target = raspberry-pi3 || $target = raspberry-pi3-64 || $target = raspberry-pi4 || $target = raspberry-pi3p-64 ]]; then
+	if [[ $target = raspberry-pi || $target = raspberry-pi0 || $target = raspberry-pi2 || $target = raspberry-pi3 || $target = raspberry-pi3-64 || $target = raspberry-pi4 || $target = raspberry-pi4-64 ]]; then
 		bootpart=${basedev}${partitionsep}1
 		rootpart=${basedev}${partitionsep}2
 		datapart=${basedev}${partitionsep}3
@@ -294,7 +294,7 @@ syspartno=0
 # data - flexible (parameter)
 # system - everything else
 
-if [[ $target = raspberry-pi || $target = raspberry-pi0 || $target = raspberry-pi2 || $target = raspberry-pi3 || $target = raspberry-pi3-64 || $target = raspberry-pi4 || $target = raspberry-pi3p-64 || $target = phytec-wega ]]; then
+if [[ $target = raspberry-pi || $target = raspberry-pi0 || $target = raspberry-pi2 || $target = raspberry-pi3 || $target = raspberry-pi3-64 || $target = raspberry-pi4 || $target = raspberry-pi4-64 || $target = phytec-wega ]]; then
 	syspartno=1
 	bootfssz=100
 	if (( grub )); then
@@ -351,7 +351,7 @@ fi
 #(( partofs = ((coreendsec / secs) + 1) * secs ))
 # we just use 2048 all the time, since some loaders are longer
 partofs=2048
-if [[ $target = raspberry-pi || $target = raspberry-pi0 || $target = raspberry-pi2 || $target = raspberry-pi3 || $target = raspberry-pi3-64 || $target = raspberry-pi4 || $target = raspberry-pi3p-64 || $target = phytec-wega ]]; then
+if [[ $target = raspberry-pi || $target = raspberry-pi0 || $target = raspberry-pi2 || $target = raspberry-pi3 || $target = raspberry-pi3-64 || $target = raspberry-pi4 || $target = raspberry-pi4-64 || $target = phytec-wega ]]; then
 	(( spartofs = partofs + (100 * 2048) ))
 else
 	spartofs=$partofs
@@ -462,7 +462,7 @@ if (( datafssz )); then
 	    dd of="$T/firsttrack" conv=notrunc bs=1 seek=$((0x1CE)) 2>/dev/null
 fi
 
-if [[ $target = raspberry-pi || $target = raspberry-pi0 || $target = raspberry-pi2 || $target = raspberry-pi3 || $target = raspberry-pi3-64 || $target = raspberry-pi4 || $target = raspberry-pi3p-64 || $target = phytec-wega ]]; then
+if [[ $target = raspberry-pi || $target = raspberry-pi0 || $target = raspberry-pi2 || $target = raspberry-pi3 || $target = raspberry-pi3-64 || $target = raspberry-pi4 || $target = raspberry-pi4-64 || $target = phytec-wega ]]; then
 	# move system and data partition from #0/#1 to #1/#2
 	dd if="$T/firsttrack" bs=1 skip=$((0x1BE)) count=32 of="$T/x" 2>/dev/null
 	dd of="$T/firsttrack" conv=notrunc bs=1 seek=$((0x1CE)) if="$T/x" 2>/dev/null
@@ -555,7 +555,7 @@ case $target {
 	dd if="$fwdir/SPL" of="$tgt" bs=1024 seek=1 > /dev/null 2>&1
 	dd if="$fwdir/u-boot.img" of="$tgt" bs=1024 seek=69 > /dev/null 2>&1
 	;;
-(raspberry-pi|raspberry-pi0|raspberry-pi2|raspberry-pi3|raspberry-pi3-64|raspberry-pi4|raspberry-pi3p-64)
+(raspberry-pi|raspberry-pi0|raspberry-pi2|raspberry-pi3|raspberry-pi3-64|raspberry-pi4|raspberry-pi4-64)
 	(( noformat )) || create_fs "$bootpart" ADKBOOT vfat
 	;;
 (phytec-wega)
@@ -575,7 +575,7 @@ if (( datafssz )); then
 	((keep)) || create_fs "$datapart" ADKDATA ext4
 	((keep)) || tune_fs "$datapart"
 	case $target {
-	(raspberry-pi|raspberry-pi0|raspberry-pi2|raspberry-pi3|raspberry-pi3-64|raspberry-pi4|raspberry-pi3p-64|phytec-wega)
+	(raspberry-pi|raspberry-pi0|raspberry-pi2|raspberry-pi3|raspberry-pi3-64|raspberry-pi4|raspberry-pi4-64|phytec-wega)
 		echo "/dev/mmcblk0p3	/data	ext4	rw	0	0" >> "$R"/etc/fstab 
 	;;
 	(banana-pro|orange-pi0|solidrun-clearfog)
@@ -597,7 +597,7 @@ fi
 
 (( quiet )) || print Finishing up with bootloader and kernel ...
 case $target {
-(raspberry-pi|raspberry-pi0|raspberry-pi2|raspberry-pi3|raspberry-pi3-64|raspberry-pi4|raspberry-pi3p-64)
+(raspberry-pi|raspberry-pi0|raspberry-pi2|raspberry-pi3|raspberry-pi3-64|raspberry-pi4|raspberry-pi4-64)
 	mount_fs "$bootpart" "$B" vfat
 	for x in "$R"/boot/*; do
 		[[ -e "$x" ]] && mv -f "$R"/boot/* "$B/"

target/aarch64/kernel/raspberry-pi3p-64 → target/aarch64/kernel/raspberry-pi4-64

@@ -8,3 +8,4 @@ CONFIG_MAILBOX=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_CLK_RASPBERRYPI=y

target/aarch64/systems/raspberry-pi3p-64 → target/aarch64/systems/raspberry-pi4-64

@@ -1,7 +1,7 @@
-config ADK_TARGET_SYSTEM_RASPBERRY_PI3P_64
-	bool "Raspberry PI 3 Model B+"
+config ADK_TARGET_SYSTEM_RASPBERRY_PI4_64
+	bool "Raspberry PI 4"
 	select ADK_TARGET_LITTLE_ENDIAN
-	select ADK_TARGET_CPU_AARCH64_CORTEX_A53
+	select ADK_TARGET_CPU_AARCH64_CORTEX_A72
 	select ADK_TARGET_BOARD_BCM28XX
 	select ADK_TARGET_WITH_VGA
 	select ADK_TARGET_WITH_SERIAL
@@ -22,5 +22,5 @@ config ADK_TARGET_SYSTEM_RASPBERRY_PI3P_64
 	select ADK_TARGET_WITH_ROOT_RW
 	select ADK_TARGET_KERNEL_IMAGE
 	help
-	  Raspberry PI 3 Model B+ (AARCH64)
+	  Raspberry PI 4 (AARCH64)
 

target/config/Config.in.cpu

@@ -21,6 +21,16 @@ config ADK_TARGET_CPU_AARCH64_CORTEX_A57
 	select ADK_TARGET_WITH_MMU
 	depends on ADK_TARGET_ARCH_AARCH64
 
+config ADK_TARGET_CPU_AARCH64_CORTEX_A72
+        bool "cortex-a72"
+	select ADK_TARGET_SUPPORTS_THREADS
+	select ADK_TARGET_SUPPORTS_NPTL
+	select ADK_TARGET_SUPPORTS_LT
+	select ADK_TARGET_CPU_WITH_FPU_VFPV4
+	select ADK_TARGET_CPU_WITH_NEON
+	select ADK_TARGET_CPU_WITH_THUMB2
+	depends on ADK_TARGET_ARCH_AARCH64
+
 # alpha
 config ADK_TARGET_CPU_ALPHA_EV4
 	bool "ev4"

target/linux/Config.in.kernelcfg

@@ -29,7 +29,7 @@ config ADK_TARGET_LINUX_KERNEL_DEFCONFIG
 	default "bcm2709_defconfig" if ADK_TARGET_SYSTEM_RASPBERRY_PI3
 	default "bcm2711_defconfig" if ADK_TARGET_SYSTEM_RASPBERRY_PI4
 	default "bcmrpi3_defconfig" if ADK_TARGET_SYSTEM_RASPBERRY_PI3_64
-	default "bcmrpi3_defconfig" if ADK_TARGET_SYSTEM_RASPBERRY_PI3P_64
+	default "bcm2711_defconfig" if ADK_TARGET_SYSTEM_RASPBERRY_PI4_64
 	default "twr-k70f120m_defconfig" if ADK_TARGET_SYSTEM_KINETIS_K70
 	default "imx_v7_cbi_hb_defconfig" if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6 && ADK_TARGET_LINUX_KERNEL_VERSION_GIT
 	default "imx_v6_v7_defconfig" if ADK_TARGET_SYSTEM_SOLIDRUN_IMX6

target/linux/config/Config.in.bluetooth

@@ -137,7 +137,7 @@ config ADK_LINUX_KERNEL_BT_HCIUART_BCM
 	select ADK_LINUX_KERNEL_BT_HCIUART
 	select ADK_LINUX_KERNEL_BT_HCIUART_3WIRE
 	select ADK_LINUX_KERNEL_BT_BCM
-	depends on ADK_TARGET_SYSTEM_RASPBERRY_PI3 || ADK_TARGET_SYSTEM_RASPBERRY_PI3P
+	depends on ADK_TARGET_SYSTEM_RASPBERRY_PI3
 	default n
 	help
 	  The Broadcom protocol support enables Bluetooth HCI over serial

target/linux/config/Config.in.ethernet

@@ -233,10 +233,10 @@ config ADK_LINUX_KERNEL_USB_LAN78XX
 	tristate "Microchip LAN78XX"
 	select ADK_LINUX_KERNEL_USB_NET_DRIVERS
 	select ADK_LINUX_KERNEL_USB_USBNET
-	depends on ADK_TARGET_SYSTEM_RASPBERRY_PI3P \
-		|| ADK_TARGET_SYSTEM_RASPBERRY_PI3P_64
-	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI3P
-	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI3P_64
+	depends on ADK_TARGET_SYSTEM_RASPBERRY_PI3 \
+		|| ADK_TARGET_SYSTEM_RASPBERRY_PI3_64
+	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI3
+	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI3_64
 	default n
 	help
 	  Microchip LAN78XX Based USB Ethernet Adapters.

target/linux/config/Config.in.wireless

@@ -158,7 +158,6 @@ config ADK_LINUX_KERNEL_BRCMFMAC_SDIO
 		ADK_TARGET_SYSTEM_PHYTEC_IMX6
 	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI0
 	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI3
-	default y if ADK_TARGET_SYSTEM_RASPBERRY_PI3P
 	default n
 	help
 	  Driver for Broadcom FullMac wireless cards (SDIO).

target/linux/patches/59aeb16c7f1254f1383476956dda0766d10c918a/localversion.patch

@@ -0,0 +1,18 @@
+diff -Nur linux-59aeb16c7f1254f1383476956dda0766d10c918a.orig/arch/arm/configs/bcm2711_defconfig linux-59aeb16c7f1254f1383476956dda0766d10c918a/arch/arm/configs/bcm2711_defconfig
+--- linux-59aeb16c7f1254f1383476956dda0766d10c918a.orig/arch/arm/configs/bcm2711_defconfig	2022-01-21 19:27:36.000000000 +0100
++++ linux-59aeb16c7f1254f1383476956dda0766d10c918a/arch/arm/configs/bcm2711_defconfig	2022-02-15 12:41:31.879194595 +0100
+@@ -1,4 +1,4 @@
+-CONFIG_LOCALVERSION="-v7l"
++CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y
+diff -Nur linux-59aeb16c7f1254f1383476956dda0766d10c918a.orig/arch/arm64/configs/bcm2711_defconfig linux-59aeb16c7f1254f1383476956dda0766d10c918a/arch/arm64/configs/bcm2711_defconfig
+--- linux-59aeb16c7f1254f1383476956dda0766d10c918a.orig/arch/arm64/configs/bcm2711_defconfig	2022-01-21 19:27:37.000000000 +0100
++++ linux-59aeb16c7f1254f1383476956dda0766d10c918a/arch/arm64/configs/bcm2711_defconfig	2022-02-15 12:41:11.014686670 +0100
+@@ -1,4 +1,4 @@
+-CONFIG_LOCALVERSION="-v8"
++CONFIG_LOCALVERSION=""
+ # CONFIG_LOCALVERSION_AUTO is not set
+ CONFIG_SYSVIPC=y
+ CONFIG_POSIX_MQUEUE=y