# This file is part of the OpenADK project. OpenADK is copyrighted # material, please see the LICENCE file in the top-level directory. config ADK_RUNTIME_HOSTNAME string "hostname for the embedded system" default "openadk" help Set your target hostname. config ADK_RUNTIME_SSH_PUBKEY string "SSH public key (root user only)" default "" help Paste your generated SSH public key here and it will be embedded into the built image, so you can use it to login instantly. config ADK_RUNTIME_PASSWORD string "root password for the embedded system" default "linux123" help Predefine the root password enabled in the built image. config ADK_RUNTIME_TMPFS_SIZE string "size of /tmp in memory (kB)" default "16384" if ADK_HARDWARE_QEMU default "16384" if ADK_TARGET_SYSTEM_LEMOTE_YEELONG default "32768" if ADK_TARGET_SYSTEM_IBM_X40 default "32768" if ADK_TARGET_SYSTEM_RASPBERRY_PI default "2048" help Size of /tmp in memory in Kilobyte. config ADK_RUNTIME_TIMEZONE string "timezone for the embedded system" default "Europe/Berlin" help Predefine the timezone for the embedded system. choice prompt "Console output on embedded system" default ADK_RUNTIME_CONSOLE_BOTH if ADK_TARGET_WITH_VGA && !ADK_TARGET_SYSTEM_RASPBERRY_PI && !ADK_TARGET_SYSTEM_QEMU_SH4 && !ADK_TARGET_SYSTEM_QEMU_SH4EB && !ADK_TARGET_SYSTEM_LEMOTE_YEELONG default ADK_RUNTIME_CONSOLE_VGA if ADK_TARGET_SYSTEM_RASPBERRY_PI || ADK_TARGET_SYSTEM_QEMU_SH4 || ADK_TARGET_SYSTEM_QEMU_SH4EB || ADK_TARGET_SYSTEM_LEMOTE_YEELONG default ADK_RUNTIME_CONSOLE_SERIAL config ADK_RUNTIME_CONSOLE_VGA bool "console output on VGA" help Start getty on VGA console. (tty1-tty6) config ADK_RUNTIME_CONSOLE_SERIAL bool "console output on serial" help Start getty on serial console. (ttyS0) config ADK_RUNTIME_CONSOLE_BOTH bool "console output on VGA and serial" help Start getty on VGA console and serial device. endchoice config ADK_RUNTIME_CONSOLE_SERIAL_SPEED string default "9600" if ADK_TARGET_SYSTEM_FON_FON2100 default "38400" if ADK_TARGET_SYSTEM_PCENGINES_WRAP default "115200" config ADK_RUNTIME_KBD_LAYOUT string "keyboard layout for the embedded system" default "" depends on ADK_TARGET_WITH_INPUT help Predefine the keyboard layout for the embedded system. choice prompt "Initial login shell for the root user" default ADK_ROOTSH_ASH config ADK_ROOTSH_ASH select BUSYBOX_ASH bool "ash (busybox)" help Use the minimalistic ash variant that is part of busybox as standard login shell for the superuser. This is the default, but discouraged due to its frugality. config ADK_ROOTSH_BASH select ADK_PACKAGE_BASH bool "bash (GNU Bourne-Again Shell)" help Use GNU bash as standard login shell for the superuser. config ADK_ROOTSH_MKSH select ADK_PACKAGE_MKSH bool "mksh (MirBSD Korn Shell)" help Use mksh (a Korn Shell variant) as standard login shell for the superuser. config ADK_ROOTSH_TCSH select ADK_PACKAGE_TCSH bool "tcsh (Tenex C Shell)" help Use tcsh (a C Shell variant) as standard login shell for the superuser. config ADK_ROOTSH_ZSH select ADK_PACKAGE_ZSH bool "zsh (The Z Shell)" help Use zsh as standard login shell for the superuser. endchoice choice prompt "System /bin/sh (POSIX script shell)" default ADK_BINSH_ASH config ADK_BINSH_ASH select BUSYBOX_ASH bool "ash (busybox)" help Use the minimalistic ash variant that is part of busybox as system shell. This is the default and rather small and fast, but lacks scripting features. config ADK_BINSH_BASH select ADK_PACKAGE_BASH bool "bash (GNU Bourne-Again Shell)" help Use GNU bash as system shell. This is discouraged due to its size and slowness. config ADK_BINSH_MKSH select ADK_PACKAGE_MKSH bool "mksh (MirBSD Korn Shell)" help Use mksh (a Korn Shell variant) as system shell, which is both small and powerful, so quite suited for this task. config ADK_BINSH_ZSH select ADK_PACKAGE_ZSH bool "zsh (The Z Shell)" help Use zsh as system shell. This is probably a bad idea. endchoice config ADK_SIMPLE_NETWORK_CONFIG prompt "simple network configuration" boolean help Manually change network config WWW: http://www.openadk.org menu "eth0 Configuration" depends on ADK_SIMPLE_NETWORK_CONFIG choice prompt "Type" default SIMPLE_NETWORK_CONFIG_ETH0_TYPE_NIC config SIMPLE_NETWORK_CONFIG_ETH0_TYPE_NIC bool "NIC / DHCP" config SIMPLE_NETWORK_CONFIG_ETH0_TYPE_NIC_MANUAL bool "NIC / manual IP" config SIMPLE_NETWORK_CONFIG_ETH0_TYPE_BRIDGE_IP bool "Bridge with IP" config SIMPLE_NETWORK_CONFIG_ETH0_TYPE_BRIDGE bool "Bridge w/o IP" config SIMPLE_NETWORK_CONFIG_ETH0_TYPE_NONE bool "None" endchoice config SIMPLE_NETWORK_CONFIG_ETH0_IP depends on SIMPLE_NETWORK_CONFIG_ETH0_TYPE_NIC_MANUAL || SIMPLE_NETWORK_CONFIG_ETH0_TYPE_BRIDGE_IP string "eth0 IP Address" default "192.168.1.2" config SIMPLE_NETWORK_CONFIG_ETH0_NM depends on SIMPLE_NETWORK_CONFIG_ETH0_TYPE_NIC_MANUAL || SIMPLE_NETWORK_CONFIG_ETH0_TYPE_BRIDGE_IP string "eth0 Netmask" default "255.255.255.0" config SIMPLE_NETWORK_CONFIG_ETH0_GW depends on SIMPLE_NETWORK_CONFIG_ETH0_TYPE_NIC_MANUAL string "eth0 Gateway" default "192.168.1.1" config SIMPLE_NETWORK_CONFIG_ETH0_BRIDGE depends on SIMPLE_NETWORK_CONFIG_ETH0_TYPE_BRIDGE || SIMPLE_NETWORK_CONFIG_ETH0_TYPE_BRIDGE_IP string "Bridge ports" default "eth0 eth1" config SIMPLE_NETWORK_CONFIG_ETH0_BC depends on SIMPLE_NETWORK_CONFIG_ETH0_TYPE_NIC_MANUAL || SIMPLE_NETWORK_CONFIG_ETH0_TYPE_BRIDGE_IP string "eth0 Broadcast" default "+" endmenu menu "wlan0 Configuration" depends on ADK_SIMPLE_NETWORK_CONFIG && \ ADK_TARGET_SYSTEM_LEMOTE_YEELONG || \ ADK_TARGET_SYSTEM_RASPBERRY_PI || \ ADK_TARGET_SYSTEM_IBM_X40 choice prompt "Type" default SIMPLE_NETWORK_CONFIG_WLAN0_TYPE_NONE config SIMPLE_NETWORK_CONFIG_WLAN0_TYPE_DHCP bool "DHCP" config SIMPLE_NETWORK_CONFIG_WLAN0_TYPE_STATIC bool "static IP configuration" endchoice endmenu menu "eth1 Configuration" depends on ADK_SIMPLE_NETWORK_CONFIG && \ !ADK_TARGET_SYSTEM_LEMOTE_YEELONG && \ !ADK_TARGET_SYSTEM_RASPBERRY_PI && \ !ADK_TARGET_SYSTEM_IBM_X40 choice prompt "Type" default SIMPLE_NETWORK_CONFIG_ETH1_TYPE_NONE config SIMPLE_NETWORK_CONFIG_ETH1_TYPE_NIC bool "NIC / DHCP" config SIMPLE_NETWORK_CONFIG_ETH1_TYPE_NIC_MANUAL bool "NIC / manual IP" config SIMPLE_NETWORK_CONFIG_ETH1_TYPE_BRIDGE_IP bool "Bridge with IP" config SIMPLE_NETWORK_CONFIG_ETH1_TYPE_BRIDGE bool "Bridge w/o IP" config SIMPLE_NETWORK_CONFIG_ETH1_TYPE_NONE bool "None" endchoice config SIMPLE_NETWORK_CONFIG_ETH1_IP depends on SIMPLE_NETWORK_CONFIG_ETH1_TYPE_NIC_MANUAL || SIMPLE_NETWORK_CONFIG_ETH1_TYPE_BRIDGE_IP string "eth1 IP Address" default "192.168.1.2" config SIMPLE_NETWORK_CONFIG_ETH1_NM depends on SIMPLE_NETWORK_CONFIG_ETH1_TYPE_NIC_MANUAL || SIMPLE_NETWORK_CONFIG_ETH1_TYPE_BRIDGE_IP string "eth1 Netmask" default "255.255.255.0" config SIMPLE_NETWORK_CONFIG_ETH1_GW depends on SIMPLE_NETWORK_CONFIG_ETH1_TYPE_NIC_MANUAL string "eth1 Gateway" default "192.168.1.1" config SIMPLE_NETWORK_CONFIG_ETH1_BRIDGE depends on SIMPLE_NETWORK_CONFIG_ETH1_TYPE_BRIDGE || SIMPLE_NETWORK_CONFIG_ETH1_TYPE_BRIDGE_IP string "Bridge ports" default "eth1 eth2" config SIMPLE_NETWORK_CONFIG_ETH1_BC depends on SIMPLE_NETWORK_CONFIG_ETH1_TYPE_NIC_MANUAL || SIMPLE_NETWORK_CONFIG_ETH1_TYPE_BRIDGE_IP string "eth1 Broadcast" default "+" endmenu menu "Resolver Configuration" depends on ADK_SIMPLE_NETWORK_CONFIG config SIMPLE_NETWORK_CONFIG_RESOLV string "Nameserver" default "192.168.1.1" endmenu