openadk/target/rb4xx/patches/ar71xx.patch

diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/ar71xx.c linux-2.6.35.7/arch/mips/ar71xx/ar71xx.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/ar71xx.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/ar71xx.c	2010-10-14 20:27:55.855601218 +0200
@@ -0,0 +1,177 @@
+/*
+ *  AR71xx SoC routines
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+static DEFINE_MUTEX(ar71xx_flash_mutex);
+
+void __iomem *ar71xx_ddr_base;
+EXPORT_SYMBOL_GPL(ar71xx_ddr_base);
+
+void __iomem *ar71xx_pll_base;
+EXPORT_SYMBOL_GPL(ar71xx_pll_base);
+
+void __iomem *ar71xx_reset_base;
+EXPORT_SYMBOL_GPL(ar71xx_reset_base);
+
+void __iomem *ar71xx_gpio_base;
+EXPORT_SYMBOL_GPL(ar71xx_gpio_base);
+
+void __iomem *ar71xx_usb_ctrl_base;
+EXPORT_SYMBOL_GPL(ar71xx_usb_ctrl_base);
+
+void ar71xx_device_stop(u32 mask)
+{
+	unsigned long flags;
+	u32 mask_inv;
+	u32 t;
+
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7130:
+	case AR71XX_SOC_AR7141:
+	case AR71XX_SOC_AR7161:
+		local_irq_save(flags);
+		t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE);
+		ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t | mask);
+		local_irq_restore(flags);
+		break;
+
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240;
+		local_irq_save(flags);
+		t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE);
+		t |= mask;
+		t &= ~mask_inv;
+		ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t);
+		local_irq_restore(flags);
+		break;
+
+	case AR71XX_SOC_AR9130:
+	case AR71XX_SOC_AR9132:
+		local_irq_save(flags);
+		t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE);
+		ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t | mask);
+		local_irq_restore(flags);
+		break;
+
+	default:
+		BUG();
+	}
+}
+EXPORT_SYMBOL_GPL(ar71xx_device_stop);
+
+void ar71xx_device_start(u32 mask)
+{
+	unsigned long flags;
+	u32 mask_inv;
+	u32 t;
+
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7130:
+	case AR71XX_SOC_AR7141:
+	case AR71XX_SOC_AR7161:
+		local_irq_save(flags);
+		t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE);
+		ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t & ~mask);
+		local_irq_restore(flags);
+		break;
+
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		mask_inv = mask & RESET_MODULE_USB_OHCI_DLL_7240;
+		local_irq_save(flags);
+		t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE);
+		t &= ~mask;
+		t |= mask_inv;
+		ar71xx_reset_wr(AR724X_RESET_REG_RESET_MODULE, t);
+		local_irq_restore(flags);
+		break;
+
+	case AR71XX_SOC_AR9130:
+	case AR71XX_SOC_AR9132:
+		local_irq_save(flags);
+		t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE);
+		ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t & ~mask);
+		local_irq_restore(flags);
+		break;
+
+	default:
+		BUG();
+	}
+}
+EXPORT_SYMBOL_GPL(ar71xx_device_start);
+
+int ar71xx_device_stopped(u32 mask)
+{
+	unsigned long flags;
+	u32 t;
+
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7130:
+	case AR71XX_SOC_AR7141:
+	case AR71XX_SOC_AR7161:
+		local_irq_save(flags);
+		t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE);
+		local_irq_restore(flags);
+		break;
+
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		local_irq_save(flags);
+		t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE);
+		local_irq_restore(flags);
+		break;
+
+	case AR71XX_SOC_AR9130:
+	case AR71XX_SOC_AR9132:
+		local_irq_save(flags);
+		t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE);
+		local_irq_restore(flags);
+		break;
+
+	default:
+		BUG();
+	}
+
+	return ((t & mask) == mask);
+}
+EXPORT_SYMBOL_GPL(ar71xx_device_stopped);
+
+void ar71xx_ddr_flush(u32 reg)
+{
+	ar71xx_ddr_wr(reg, 1);
+	while ((ar71xx_ddr_rr(reg) & 0x1));
+
+	ar71xx_ddr_wr(reg, 1);
+	while ((ar71xx_ddr_rr(reg) & 0x1));
+}
+EXPORT_SYMBOL_GPL(ar71xx_ddr_flush);
+
+void ar71xx_flash_acquire(void)
+{
+	mutex_lock(&ar71xx_flash_mutex);
+}
+EXPORT_SYMBOL_GPL(ar71xx_flash_acquire);
+
+void ar71xx_flash_release(void)
+{
+	mutex_unlock(&ar71xx_flash_mutex);
+}
+EXPORT_SYMBOL_GPL(ar71xx_flash_release);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap91-eth.c linux-2.6.35.7/arch/mips/ar71xx/dev-ap91-eth.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap91-eth.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-ap91-eth.c	2010-10-14 20:27:55.876851074 +0200
@@ -0,0 +1,70 @@
+/*
+ *  Atheros AP91 reference board ethernet initialization
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "devices.h"
+#include "dev-dsa.h"
+#include "dev-ap91-eth.h"
+
+static struct dsa_chip_data ap91_dsa_chip = {
+	.port_names[0]  = "cpu",
+	.port_names[1]  = "lan1",
+	.port_names[2]  = "lan2",
+	.port_names[3]  = "lan3",
+	.port_names[4]  = "lan4",
+};
+
+static struct dsa_platform_data ap91_dsa_data = {
+	.nr_chips	= 1,
+	.chip		= &ap91_dsa_chip,
+};
+
+static void ap91_eth_set_port_name(unsigned port, const char *name)
+{
+	if (port < 1 || port > 5)
+		return;
+
+	if (name)
+		ap91_dsa_chip.port_names[port] = (char *) name;
+}
+
+void __init ap91_eth_init(u8 *mac_addr, const char *port_names[])
+{
+	if (mac_addr)
+		ar71xx_set_mac_base(mac_addr);
+
+	if (port_names) {
+		int i;
+
+		for (i = 0; i < AP91_ETH_NUM_PORT_NAMES; i++)
+			ap91_eth_set_port_name(i + 1, port_names[i]);
+	}
+
+	/* WAN port */
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
+	ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
+	ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
+
+	/* LAN ports */
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.speed = SPEED_1000;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+	ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
+	ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
+	ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
+
+	ar71xx_add_device_mdio(0x0);
+	ar71xx_add_device_eth(1);
+	ar71xx_add_device_eth(0);
+
+	ar71xx_add_device_dsa(1, &ap91_dsa_data);
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap91-eth.h linux-2.6.35.7/arch/mips/ar71xx/dev-ap91-eth.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap91-eth.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-ap91-eth.h	2010-10-14 20:27:55.918101097 +0200
@@ -0,0 +1,23 @@
+/*
+ *  Atheros AP91 reference board ethernet initialization
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_AP91_ETH_H
+#define _AR71XX_DEV_AP91_ETH_H
+
+#define AP91_ETH_NUM_PORT_NAMES	4
+
+#if defined(CONFIG_AR71XX_DEV_AP91_ETH)
+void ap91_eth_init(u8 *mac_addr, const char *port_names[]) __init;
+#else
+static inline void ap91_eth_init(u8 *mac_addr) { }
+#endif
+
+#endif /* _AR71XX_DEV_AP91_ETH_H */
+
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.35.7/arch/mips/ar71xx/dev-ap91-pci.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap91-pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-ap91-pci.c	2010-10-14 20:27:55.964356595 +0200
@@ -0,0 +1,114 @@
+/*
+ *  Atheros AP91 reference board PCI initialization
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#include "dev-ap91-pci.h"
+
+static struct ath9k_platform_data ap91_wmac_data;
+static char ap91_wmac_mac[6];
+static int ap91_pci_fixup_enabled;
+
+static struct ar71xx_pci_irq ap91_pci_irqs[] __initdata = {
+	{
+		.slot	= 0,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV0,
+	}
+};
+
+static int ap91_pci_plat_dev_init(struct pci_dev *dev)
+{
+	switch(PCI_SLOT(dev->devfn)) {
+	case 0:
+		dev->dev.platform_data = &ap91_wmac_data;
+		break;
+	}
+
+	return 0;
+}
+
+static void ap91_pci_fixup(struct pci_dev *dev)
+{
+	void __iomem *mem;
+	u16 *cal_data;
+	u16 cmd;
+	u32 val;
+
+	if (!ap91_pci_fixup_enabled)
+		return;
+
+	printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev));
+
+	cal_data = ap91_wmac_data.eeprom_data;
+	if (*cal_data != 0xa55a) {
+		printk(KERN_ERR "PCI: no calibration data found for %s\n",
+		       pci_name(dev));
+		return;
+	}
+
+	mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
+	if (!mem) {
+		printk(KERN_ERR "PCI: ioremap error for device %s\n",
+		       pci_name(dev));
+		return;
+	}
+
+	/* Setup the PCI device to allow access to the internal registers */
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff);
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+        /* set pointer to first reg address */
+	cal_data += 3;
+	while (*cal_data != 0xffff) {
+		u32 reg;
+		reg = *cal_data++;
+		val = *cal_data++;
+		val |= (*cal_data++) << 16;
+
+		__raw_writel(val, mem + reg);
+		udelay(100);
+	}
+
+	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
+	dev->vendor = val & 0xffff;
+	dev->device = (val >> 16) & 0xffff;
+
+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
+	dev->revision = val & 0xff;
+	dev->class = val >> 8; /* upper 3 bytes */
+
+	iounmap(mem);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ap91_pci_fixup);
+
+void __init ap91_pci_init(u8 *cal_data, u8 *mac_addr)
+{
+	if (cal_data)
+		memcpy(ap91_wmac_data.eeprom_data, cal_data,
+		       sizeof(ap91_wmac_data.eeprom_data));
+
+	if (mac_addr) {
+		memcpy(ap91_wmac_mac, mac_addr, sizeof(ap91_wmac_mac));
+		ap91_wmac_data.macaddr = ap91_wmac_mac;
+	}
+
+	ar71xx_pci_plat_dev_init = ap91_pci_plat_dev_init;
+	ar71xx_pci_init(ARRAY_SIZE(ap91_pci_irqs), ap91_pci_irqs);
+
+	ap91_pci_fixup_enabled = 1;
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap91-pci.h linux-2.6.35.7/arch/mips/ar71xx/dev-ap91-pci.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap91-pci.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-ap91-pci.h	2010-10-14 20:27:56.005601094 +0200
@@ -0,0 +1,21 @@
+/*
+ *  Atheros AP91 reference board PCI initialization
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_AP91_PCI_H
+#define _AR71XX_DEV_AP91_PCI_H
+
+#if defined(CONFIG_AR71XX_DEV_AP91_PCI)
+void ap91_pci_init(u8 *cal_data, u8 *mac_addr) __init;
+#else
+static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) { }
+#endif
+
+#endif /* _AR71XX_DEV_AP91_PCI_H */
+
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.35.7/arch/mips/ar71xx/dev-ap94-pci.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap94-pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-ap94-pci.c	2010-10-14 20:27:56.056135764 +0200
@@ -0,0 +1,159 @@
+/*
+ *  Atheros AP94 reference board PCI initialization
+ *
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#include "dev-ap94-pci.h"
+
+static struct ath9k_platform_data ap94_wmac0_data;
+static struct ath9k_platform_data ap94_wmac1_data;
+static char ap94_wmac0_mac[6];
+static char ap94_wmac1_mac[6];
+static int ap94_pci_fixup_enabled;
+
+static struct ar71xx_pci_irq ap94_pci_irqs[] __initdata = {
+        {
+                .slot   = 0,
+                .pin    = 1,
+                .irq    = AR71XX_PCI_IRQ_DEV0,
+        }, {
+                .slot   = 1,
+                .pin    = 1,
+                .irq    = AR71XX_PCI_IRQ_DEV1,
+        }
+};
+
+static int ap94_pci_plat_dev_init(struct pci_dev *dev)
+{
+	switch(PCI_SLOT(dev->devfn)) {
+	case 17:
+		dev->dev.platform_data = &ap94_wmac0_data;
+		break;
+
+	case 18:
+		dev->dev.platform_data = &ap94_wmac1_data;
+		break;
+	}
+
+	return 0;
+}
+
+static void ap94_pci_fixup(struct pci_dev *dev)
+{
+	void __iomem *mem;
+	u16 *cal_data;
+	u16 cmd;
+	u32 bar0;
+	u32 val;
+
+	if (!ap94_pci_fixup_enabled)
+		return;
+
+	switch (PCI_SLOT(dev->devfn)) {
+	case 17:
+		cal_data = ap94_wmac0_data.eeprom_data;
+		break;
+	case 18:
+		cal_data = ap94_wmac1_data.eeprom_data;
+		break;
+	default:
+		return;
+	}
+
+	if (*cal_data != 0xa55a) {
+		printk(KERN_ERR "PCI: no calibration data found for %s\n",
+		       pci_name(dev));
+		return;
+	}
+
+	mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
+	if (!mem) {
+		printk(KERN_ERR "PCI: ioremap error for device %s\n",
+		       pci_name(dev));
+		return;
+	}
+
+	printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev));
+
+	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
+
+	/* Setup the PCI device to allow access to the internal registers */
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE);
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+	/* set pointer to first reg address */
+	cal_data += 3;
+	while (*cal_data != 0xffff) {
+		u32 reg;
+		reg = *cal_data++;
+		val = *cal_data++;
+		val |= (*cal_data++) << 16;
+
+		__raw_writel(val, mem + reg);
+		udelay(100);
+	}
+
+	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
+	dev->vendor = val & 0xffff;
+	dev->device = (val >> 16) & 0xffff;
+
+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
+	dev->revision = val & 0xff;
+	dev->class = val >> 8; /* upper 3 bytes */
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+	pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
+
+	iounmap(mem);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ap94_pci_fixup);
+
+void __init ap94_pci_enable_quirk_wndr3700(void)
+{
+	ap94_wmac0_data.quirk_wndr3700 = 1;
+	ap94_wmac1_data.quirk_wndr3700 = 1;
+}
+
+void __init ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+			  u8 *cal_data1, u8 *mac_addr1)
+{
+	if (cal_data0)
+		memcpy(ap94_wmac0_data.eeprom_data, cal_data0,
+		       sizeof(ap94_wmac0_data.eeprom_data));
+
+	if (cal_data1)
+		memcpy(ap94_wmac1_data.eeprom_data, cal_data1,
+		       sizeof(ap94_wmac1_data.eeprom_data));
+
+	if (mac_addr0) {
+		memcpy(ap94_wmac0_mac, mac_addr0, sizeof(ap94_wmac0_mac));
+		ap94_wmac0_data.macaddr = ap94_wmac0_mac;
+	}
+
+	if (mac_addr1) {
+		memcpy(ap94_wmac1_mac, mac_addr1, sizeof(ap94_wmac1_mac));
+		ap94_wmac1_data.macaddr = ap94_wmac1_mac;
+	}
+
+	ar71xx_pci_plat_dev_init = ap94_pci_plat_dev_init;
+	ar71xx_pci_init(ARRAY_SIZE(ap94_pci_irqs), ap94_pci_irqs);
+
+	ap94_pci_fixup_enabled = 1;
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap94-pci.h linux-2.6.35.7/arch/mips/ar71xx/dev-ap94-pci.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ap94-pci.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-ap94-pci.h	2010-10-14 20:27:56.105939718 +0200
@@ -0,0 +1,28 @@
+/*
+ *  Atheros AP94 reference board PCI initialization
+ *
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_AP94_PCI_H
+#define _AR71XX_DEV_AP94_PCI_H
+
+#if defined(CONFIG_AR71XX_DEV_AP94_PCI)
+void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+		   u8 *cal_data1, u8 *mac_addr1) __init;
+
+void ap94_pci_enable_quirk_wndr3700(void) __init;
+
+#else
+static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+				 u8 *cal_data1, u8 *mac_addr1) {}
+
+static inline void ap94_pci_enable_quirk_wndr3700(void) {}
+#endif
+
+#endif /* _AR71XX_DEV_AP94_PCI_H */
+
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ar913x-wmac.c linux-2.6.35.7/arch/mips/ar71xx/dev-ar913x-wmac.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ar913x-wmac.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-ar913x-wmac.c	2010-10-14 20:27:56.154378236 +0200
@@ -0,0 +1,68 @@
+/*
+ *  Atheros AR913x SoC built-in WMAC device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "dev-ar913x-wmac.h"
+
+static struct ath9k_platform_data ar913x_wmac_data;
+static char ar913x_wmac_mac[6];
+
+static struct resource ar913x_wmac_resources[] = {
+	{
+		.start	= AR91XX_WMAC_BASE,
+		.end	= AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= AR71XX_CPU_IRQ_IP2,
+		.end	= AR71XX_CPU_IRQ_IP2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ar913x_wmac_device = {
+	.name		= "ath9k",
+	.id		= -1,
+	.resource	= ar913x_wmac_resources,
+	.num_resources	= ARRAY_SIZE(ar913x_wmac_resources),
+	.dev = {
+		.platform_data = &ar913x_wmac_data,
+	},
+};
+
+void __init ar913x_add_device_wmac(u8 *cal_data, u8 *mac_addr)
+{
+	if (cal_data)
+		memcpy(ar913x_wmac_data.eeprom_data, cal_data,
+		       sizeof(ar913x_wmac_data.eeprom_data));
+
+	if (mac_addr) {
+		memcpy(ar913x_wmac_mac, mac_addr, sizeof(ar913x_wmac_mac));
+		ar913x_wmac_data.macaddr = ar913x_wmac_mac;
+	}
+
+	ar71xx_device_stop(RESET_MODULE_AMBA2WMAC);
+	mdelay(10);
+
+	ar71xx_device_start(RESET_MODULE_AMBA2WMAC);
+	mdelay(10);
+
+	platform_device_register(&ar913x_wmac_device);
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ar913x-wmac.h linux-2.6.35.7/arch/mips/ar71xx/dev-ar913x-wmac.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-ar913x-wmac.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-ar913x-wmac.h	2010-10-14 20:27:56.205590855 +0200
@@ -0,0 +1,19 @@
+/*
+ *  Atheros AR913x SoC built-in WMAC device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_AR913X_WMAC_H
+#define _AR71XX_DEV_AR913X_WMAC_H
+
+void ar913x_add_device_wmac(u8 *cal_data, u8 *mac_addr) __init;
+
+#endif /* _AR71XX_DEV_AR913X_WMAC_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-dsa.c linux-2.6.35.7/arch/mips/ar71xx/dev-dsa.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-dsa.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-dsa.c	2010-10-14 20:27:56.255387205 +0200
@@ -0,0 +1,50 @@
+/*
+ *  Atheros AR71xx DSA switch device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "devices.h"
+#include "dev-dsa.h"
+
+static struct platform_device ar71xx_dsa_switch_device = {
+	.name		= "dsa",
+	.id		= 0,
+};
+
+void __init ar71xx_add_device_dsa(unsigned int id,
+				  struct dsa_platform_data *d)
+{
+	int i;
+
+	switch (id) {
+	case 0:
+		d->netdev = &ar71xx_eth0_device.dev;
+		break;
+	case 1:
+		d->netdev = &ar71xx_eth1_device.dev;
+		break;
+	default:
+		printk(KERN_ERR
+			"ar71xx: invalid ethernet id %d for DSA switch\n",
+			id);
+		return;
+	}
+
+	for (i = 0; i < d->nr_chips; i++)
+		d->chip[i].mii_bus = &ar71xx_mdio_device.dev;
+
+	ar71xx_dsa_switch_device.dev.platform_data = d;
+
+	platform_device_register(&ar71xx_dsa_switch_device);
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-dsa.h linux-2.6.35.7/arch/mips/ar71xx/dev-dsa.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-dsa.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-dsa.h	2010-10-14 20:27:56.305200658 +0200
@@ -0,0 +1,20 @@
+/*
+ *  Atheros AR71xx DSA switch device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_DSA_H
+#define _AR71XX_DEV_DSA_H
+
+#include <net/dsa.h>
+
+void ar71xx_add_device_dsa(unsigned int id,
+			   struct dsa_platform_data *d) __init;
+
+#endif /* _AR71XX_DEV_DSA_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.35.7/arch/mips/ar71xx/dev-gpio-buttons.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-gpio-buttons.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-gpio-buttons.c	2010-10-14 20:27:56.355043092 +0200
@@ -0,0 +1,58 @@
+/*
+ *  Atheros AR71xx GPIO button support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "linux/init.h"
+#include <linux/platform_device.h>
+
+#include "dev-gpio-buttons.h"
+
+void __init ar71xx_add_device_gpio_buttons(int id,
+					   unsigned poll_interval,
+					   unsigned nbuttons,
+					   struct gpio_button *buttons)
+{
+	struct platform_device *pdev;
+	struct gpio_buttons_platform_data pdata;
+	struct gpio_button *p;
+	int err;
+
+	p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return;
+
+	memcpy(p, buttons, nbuttons * sizeof(*p));
+
+	pdev = platform_device_alloc("gpio-buttons", id);
+	if (!pdev)
+		goto err_free_buttons;
+
+	memset(&pdata, 0, sizeof(pdata));
+	pdata.poll_interval = poll_interval;
+	pdata.nbuttons = nbuttons;
+	pdata.buttons = p;
+
+	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (err)
+		goto err_put_pdev;
+
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto err_put_pdev;
+
+	return;
+
+err_put_pdev:
+	platform_device_put(pdev);
+
+err_free_buttons:
+	kfree(p);
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-gpio-buttons.h linux-2.6.35.7/arch/mips/ar71xx/dev-gpio-buttons.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-gpio-buttons.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-gpio-buttons.h	2010-10-14 20:27:56.404843567 +0200
@@ -0,0 +1,25 @@
+/*
+ *  Atheros AR71xx GPIO button support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_GPIO_BUTTONS_H
+#define _AR71XX_DEV_GPIO_BUTTONS_H
+
+#include <linux/input.h>
+#include <linux/gpio_buttons.h>
+
+#include <asm/mach-ar71xx/platform.h>
+
+void ar71xx_add_device_gpio_buttons(int id,
+				    unsigned poll_interval,
+				    unsigned nbuttons,
+				    struct gpio_button *buttons) __init;
+
+#endif /* _AR71XX_DEV_GPIO_BUTTONS_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/devices.c linux-2.6.35.7/arch/mips/ar71xx/devices.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/devices.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/devices.c	2010-10-14 20:27:56.454649960 +0200
@@ -0,0 +1,575 @@
+/*
+ *  Atheros AR71xx SoC platform devices
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "devices.h"
+
+static u8 ar71xx_mac_base[ETH_ALEN] __initdata;
+
+static struct resource ar71xx_uart_resources[] = {
+	{
+		.start	= AR71XX_UART_BASE,
+		.end	= AR71XX_UART_BASE + AR71XX_UART_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
+static struct plat_serial8250_port ar71xx_uart_data[] = {
+	{
+		.mapbase	= AR71XX_UART_BASE,
+		.irq		= AR71XX_MISC_IRQ_UART,
+		.flags		= AR71XX_UART_FLAGS,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	}, {
+		/* terminating entry */
+	}
+};
+
+static struct platform_device ar71xx_uart_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.resource	= ar71xx_uart_resources,
+	.num_resources	= ARRAY_SIZE(ar71xx_uart_resources),
+	.dev = {
+		.platform_data	= ar71xx_uart_data
+	},
+};
+
+void __init ar71xx_add_device_uart(void)
+{
+	ar71xx_uart_data[0].uartclk = ar71xx_ahb_freq;
+	platform_device_register(&ar71xx_uart_device);
+}
+
+static struct resource ar71xx_mdio_resources[] = {
+	{
+		.name	= "mdio_base",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR71XX_GE0_BASE,
+		.end	= AR71XX_GE0_BASE + 0x200 - 1,
+	}
+};
+
+static struct ag71xx_mdio_platform_data ar71xx_mdio_data;
+
+struct platform_device ar71xx_mdio_device = {
+	.name		= "ag71xx-mdio",
+	.id		= -1,
+	.resource	= ar71xx_mdio_resources,
+	.num_resources	= ARRAY_SIZE(ar71xx_mdio_resources),
+	.dev = {
+		.platform_data = &ar71xx_mdio_data,
+	},
+};
+
+void __init ar71xx_add_device_mdio(u32 phy_mask)
+{
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		ar71xx_mdio_data.is_ar7240 = 1;
+		break;
+	default:
+		break;
+	}
+
+	ar71xx_mdio_data.phy_mask = phy_mask;
+
+	platform_device_register(&ar71xx_mdio_device);
+}
+
+static void ar71xx_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
+{
+	void __iomem *base;
+	u32 t;
+
+	base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+
+	t = __raw_readl(base + cfg_reg);
+	t &= ~(3 << shift);
+	t |=  (2 << shift);
+	__raw_writel(t, base + cfg_reg);
+	udelay(100);
+
+	__raw_writel(pll_val, base + pll_reg);
+
+	t |= (3 << shift);
+	__raw_writel(t, base + cfg_reg);
+	udelay(100);
+
+	t &= ~(3 << shift);
+	__raw_writel(t, base + cfg_reg);
+	udelay(100);
+
+	printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n",
+		(unsigned int)(base + pll_reg), __raw_readl(base + pll_reg));
+
+	iounmap(base);
+}
+
+struct ar71xx_eth_pll_data ar71xx_eth0_pll_data;
+struct ar71xx_eth_pll_data ar71xx_eth1_pll_data;
+
+static u32 ar71xx_get_eth_pll(unsigned int mac, int speed)
+{
+	struct ar71xx_eth_pll_data *pll_data;
+	u32 pll_val;
+
+	switch (mac) {
+	case 0:
+		pll_data = &ar71xx_eth0_pll_data;
+		break;
+	case 1:
+		pll_data = &ar71xx_eth1_pll_data;
+		break;
+	default:
+		BUG();
+	}
+
+	switch (speed) {
+	case SPEED_10:
+		pll_val = pll_data->pll_10;
+		break;
+	case SPEED_100:
+		pll_val = pll_data->pll_100;
+		break;
+	case SPEED_1000:
+		pll_val = pll_data->pll_1000;
+		break;
+	default:
+		BUG();
+	}
+
+	return pll_val;
+}
+
+static void ar71xx_set_pll_ge0(int speed)
+{
+	u32 val = ar71xx_get_eth_pll(0, speed);
+
+	ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK,
+			val, AR71XX_ETH0_PLL_SHIFT);
+}
+
+static void ar71xx_set_pll_ge1(int speed)
+{
+	u32 val = ar71xx_get_eth_pll(1, speed);
+
+	ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK,
+			 val, AR71XX_ETH1_PLL_SHIFT);
+}
+
+static void ar724x_set_pll_ge0(int speed)
+{
+	/* TODO */
+}
+
+static void ar724x_set_pll_ge1(int speed)
+{
+	/* TODO */
+}
+
+static void ar91xx_set_pll_ge0(int speed)
+{
+	u32 val = ar71xx_get_eth_pll(0, speed);
+
+	ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH0_INT_CLOCK,
+			 val, AR91XX_ETH0_PLL_SHIFT);
+}
+
+static void ar91xx_set_pll_ge1(int speed)
+{
+	u32 val = ar71xx_get_eth_pll(1, speed);
+
+	ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH1_INT_CLOCK,
+			 val, AR91XX_ETH1_PLL_SHIFT);
+}
+
+static void ar71xx_ddr_flush_ge0(void)
+{
+	ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE0);
+}
+
+static void ar71xx_ddr_flush_ge1(void)
+{
+	ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE1);
+}
+
+static void ar724x_ddr_flush_ge0(void)
+{
+	ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar724x_ddr_flush_ge1(void)
+{
+	ar71xx_ddr_flush(AR724X_DDR_REG_FLUSH_GE1);
+}
+
+static void ar91xx_ddr_flush_ge0(void)
+{
+	ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE0);
+}
+
+static void ar91xx_ddr_flush_ge1(void)
+{
+	ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE1);
+}
+
+static struct resource ar71xx_eth0_resources[] = {
+	{
+		.name	= "mac_base",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR71XX_GE0_BASE,
+		.end	= AR71XX_GE0_BASE + 0x200 - 1,
+	}, {
+		.name	= "mii_ctrl",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR71XX_MII_BASE + MII_REG_MII0_CTRL,
+		.end	= AR71XX_MII_BASE + MII_REG_MII0_CTRL + 3,
+	}, {
+		.name	= "mac_irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AR71XX_CPU_IRQ_GE0,
+		.end	= AR71XX_CPU_IRQ_GE0,
+	},
+};
+
+struct ag71xx_platform_data ar71xx_eth0_data = {
+	.reset_bit	= RESET_MODULE_GE0_MAC,
+};
+
+struct platform_device ar71xx_eth0_device = {
+	.name		= "ag71xx",
+	.id		= 0,
+	.resource	= ar71xx_eth0_resources,
+	.num_resources	= ARRAY_SIZE(ar71xx_eth0_resources),
+	.dev = {
+		.platform_data = &ar71xx_eth0_data,
+	},
+};
+
+static struct resource ar71xx_eth1_resources[] = {
+	{
+		.name	= "mac_base",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR71XX_GE1_BASE,
+		.end	= AR71XX_GE1_BASE + 0x200 - 1,
+	}, {
+		.name	= "mii_ctrl",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR71XX_MII_BASE + MII_REG_MII1_CTRL,
+		.end	= AR71XX_MII_BASE + MII_REG_MII1_CTRL + 3,
+	}, {
+		.name	= "mac_irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= AR71XX_CPU_IRQ_GE1,
+		.end	= AR71XX_CPU_IRQ_GE1,
+	},
+};
+
+struct ag71xx_platform_data ar71xx_eth1_data = {
+	.reset_bit	= RESET_MODULE_GE1_MAC,
+};
+
+struct platform_device ar71xx_eth1_device = {
+	.name		= "ag71xx",
+	.id		= 1,
+	.resource	= ar71xx_eth1_resources,
+	.num_resources	= ARRAY_SIZE(ar71xx_eth1_resources),
+	.dev = {
+		.platform_data = &ar71xx_eth1_data,
+	},
+};
+
+#define AR71XX_PLL_VAL_1000	0x00110000
+#define AR71XX_PLL_VAL_100	0x00001099
+#define AR71XX_PLL_VAL_10	0x00991099
+
+#define AR724X_PLL_VAL_1000	0x00110000
+#define AR724X_PLL_VAL_100	0x00001099
+#define AR724X_PLL_VAL_10	0x00991099
+
+#define AR91XX_PLL_VAL_1000	0x1a000000
+#define AR91XX_PLL_VAL_100	0x13000a44
+#define AR91XX_PLL_VAL_10	0x00441099
+
+static void __init ar71xx_init_eth_pll_data(unsigned int id)
+{
+	struct ar71xx_eth_pll_data *pll_data;
+	u32 pll_10, pll_100, pll_1000;
+
+	switch (id) {
+	case 0:
+		pll_data = &ar71xx_eth0_pll_data;
+		break;
+	case 1:
+		pll_data = &ar71xx_eth1_pll_data;
+		break;
+	default:
+		BUG();
+	}
+
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7130:
+	case AR71XX_SOC_AR7141:
+	case AR71XX_SOC_AR7161:
+		pll_10 = AR71XX_PLL_VAL_10;
+		pll_100 = AR71XX_PLL_VAL_100;
+		pll_1000 = AR71XX_PLL_VAL_1000;
+		break;
+
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		pll_10 = AR724X_PLL_VAL_10;
+		pll_100 = AR724X_PLL_VAL_100;
+		pll_1000 = AR724X_PLL_VAL_1000;
+		break;
+
+	case AR71XX_SOC_AR9130:
+	case AR71XX_SOC_AR9132:
+		pll_10 = AR91XX_PLL_VAL_10;
+		pll_100 = AR91XX_PLL_VAL_100;
+		pll_1000 = AR91XX_PLL_VAL_1000;
+		break;
+	default:
+		BUG();
+	}
+
+	if (!pll_data->pll_10)
+		pll_data->pll_10 = pll_10;
+
+	if (!pll_data->pll_100)
+		pll_data->pll_100 = pll_100;
+
+	if (!pll_data->pll_1000)
+		pll_data->pll_1000 = pll_1000;
+}
+
+static int ar71xx_eth_instance __initdata;
+void __init ar71xx_add_device_eth(unsigned int id)
+{
+	struct platform_device *pdev;
+	struct ag71xx_platform_data *pdata;
+
+	ar71xx_init_eth_pll_data(id);
+
+	switch (id) {
+	case 0:
+		switch (ar71xx_eth0_data.phy_if_mode) {
+		case PHY_INTERFACE_MODE_MII:
+			ar71xx_eth0_data.mii_if = MII0_CTRL_IF_MII;
+			break;
+		case PHY_INTERFACE_MODE_GMII:
+			ar71xx_eth0_data.mii_if = MII0_CTRL_IF_GMII;
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			ar71xx_eth0_data.mii_if = MII0_CTRL_IF_RGMII;
+			break;
+		case PHY_INTERFACE_MODE_RMII:
+			ar71xx_eth0_data.mii_if = MII0_CTRL_IF_RMII;
+			break;
+		default:
+			printk(KERN_ERR "ar71xx: invalid PHY interface mode "
+					"for eth0\n");
+			return;
+		}
+		pdev = &ar71xx_eth0_device;
+		break;
+	case 1:
+		switch (ar71xx_eth1_data.phy_if_mode) {
+		case PHY_INTERFACE_MODE_RMII:
+			ar71xx_eth1_data.mii_if = MII1_CTRL_IF_RMII;
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			ar71xx_eth1_data.mii_if = MII1_CTRL_IF_RGMII;
+			break;
+		default:
+			printk(KERN_ERR "ar71xx: invalid PHY interface mode "
+					"for eth1\n");
+			return;
+		}
+		pdev = &ar71xx_eth1_device;
+		break;
+	default:
+		printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id);
+		return;
+	}
+
+	pdata = pdev->dev.platform_data;
+
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7130:
+		pdata->ddr_flush = id ? ar71xx_ddr_flush_ge1
+				      : ar71xx_ddr_flush_ge0;
+		pdata->set_pll =  id ? ar71xx_set_pll_ge1
+				     : ar71xx_set_pll_ge0;
+		break;
+
+	case AR71XX_SOC_AR7141:
+	case AR71XX_SOC_AR7161:
+		pdata->ddr_flush = id ? ar71xx_ddr_flush_ge1
+				      : ar71xx_ddr_flush_ge0;
+		pdata->set_pll =  id ? ar71xx_set_pll_ge1
+				     : ar71xx_set_pll_ge0;
+		pdata->has_gbit = 1;
+		break;
+
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		ar71xx_eth0_data.reset_bit |= AR724X_RESET_GE0_MDIO;
+		ar71xx_eth1_data.reset_bit |= AR724X_RESET_GE1_MDIO;
+		/* fall through */
+	case AR71XX_SOC_AR7240:
+		pdata->ddr_flush = id ? ar724x_ddr_flush_ge1
+				      : ar724x_ddr_flush_ge0;
+		pdata->set_pll =  id ? ar724x_set_pll_ge1
+				     : ar724x_set_pll_ge0;
+		pdata->is_ar724x = 1;
+		break;
+
+	case AR71XX_SOC_AR9130:
+		pdata->ddr_flush = id ? ar91xx_ddr_flush_ge1
+				      : ar91xx_ddr_flush_ge0;
+		pdata->set_pll =  id ? ar91xx_set_pll_ge1
+				     : ar91xx_set_pll_ge0;
+		pdata->is_ar91xx = 1;
+		break;
+
+	case AR71XX_SOC_AR9132:
+		pdata->ddr_flush = id ? ar91xx_ddr_flush_ge1
+				      : ar91xx_ddr_flush_ge0;
+		pdata->set_pll =  id ? ar91xx_set_pll_ge1
+				      : ar91xx_set_pll_ge0;
+		pdata->is_ar91xx = 1;
+		pdata->has_gbit = 1;
+		break;
+
+	default:
+		BUG();
+	}
+
+	switch (pdata->phy_if_mode) {
+	case PHY_INTERFACE_MODE_GMII:
+	case PHY_INTERFACE_MODE_RGMII:
+		if (!pdata->has_gbit) {
+			printk(KERN_ERR "ar71xx: no gbit available on eth%d\n",
+					id);
+			return;
+		}
+		/* fallthrough */
+	default:
+		break;
+	}
+
+	if (is_valid_ether_addr(ar71xx_mac_base)) {
+		memcpy(pdata->mac_addr, ar71xx_mac_base, ETH_ALEN);
+		pdata->mac_addr[5] += ar71xx_eth_instance;
+	} else {
+		random_ether_addr(pdata->mac_addr);
+		printk(KERN_DEBUG
+			"ar71xx: using random MAC address for eth%d\n",
+			ar71xx_eth_instance);
+	}
+
+	if (pdata->mii_bus_dev == NULL)
+		pdata->mii_bus_dev = &ar71xx_mdio_device.dev;
+
+	/* Reset the device */
+	ar71xx_device_stop(pdata->reset_bit);
+	mdelay(100);
+
+	ar71xx_device_start(pdata->reset_bit);
+	mdelay(100);
+
+	platform_device_register(pdev);
+	ar71xx_eth_instance++;
+}
+
+static struct resource ar71xx_spi_resources[] = {
+	[0] = {
+		.start	= AR71XX_SPI_BASE,
+		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ar71xx_spi_device = {
+	.name		= "ar71xx-spi",
+	.id		= -1,
+	.resource	= ar71xx_spi_resources,
+	.num_resources	= ARRAY_SIZE(ar71xx_spi_resources),
+};
+
+void __init ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata,
+				struct spi_board_info const *info,
+				unsigned n)
+{
+	spi_register_board_info(info, n);
+	ar71xx_spi_device.dev.platform_data = pdata;
+	platform_device_register(&ar71xx_spi_device);
+}
+
+void __init ar71xx_add_device_wdt(void)
+{
+	platform_device_register_simple("ar71xx-wdt", -1, NULL, 0);
+}
+
+void __init ar71xx_set_mac_base(unsigned char *mac)
+{
+	memcpy(ar71xx_mac_base, mac, ETH_ALEN);
+}
+
+void __init ar71xx_parse_mac_addr(char *mac_str)
+{
+	u8 tmp[ETH_ALEN];
+	int t;
+
+	t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+			&tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
+
+	if (t != ETH_ALEN)
+		t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx",
+			&tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
+
+	if (t == ETH_ALEN)
+		ar71xx_set_mac_base(tmp);
+	else
+		printk(KERN_DEBUG "ar71xx: failed to parse mac address "
+				"\"%s\"\n", mac_str);
+}
+
+static int __init ar71xx_ethaddr_setup(char *str)
+{
+	ar71xx_parse_mac_addr(str);
+	return 1;
+}
+__setup("ethaddr=", ar71xx_ethaddr_setup);
+
+static int __init ar71xx_kmac_setup(char *str)
+{
+	ar71xx_parse_mac_addr(str);
+	return 1;
+}
+__setup("kmac=", ar71xx_kmac_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/devices.h linux-2.6.35.7/arch/mips/ar71xx/devices.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/devices.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/devices.h	2010-10-14 20:27:56.504463432 +0200
@@ -0,0 +1,48 @@
+/*
+ *  Atheros AR71xx SoC device definitions
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef __AR71XX_DEVICES_H
+#define __AR71XX_DEVICES_H
+
+#include <asm/mach-ar71xx/platform.h>
+
+struct platform_device;
+
+void ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata,
+			   struct spi_board_info const *info,
+			   unsigned n) __init;
+
+void ar71xx_set_mac_base(unsigned char *mac) __init;
+void ar71xx_parse_mac_addr(char *mac_str) __init;
+
+struct ar71xx_eth_pll_data {
+	u32	pll_10;
+	u32	pll_100;
+	u32	pll_1000;
+};
+
+extern struct ar71xx_eth_pll_data ar71xx_eth0_pll_data;
+extern struct ar71xx_eth_pll_data ar71xx_eth1_pll_data;
+
+extern struct ag71xx_platform_data ar71xx_eth0_data;
+extern struct ag71xx_platform_data ar71xx_eth1_data;
+extern struct platform_device ar71xx_eth0_device;
+extern struct platform_device ar71xx_eth1_device;
+void ar71xx_add_device_eth(unsigned int id) __init;
+
+extern struct platform_device ar71xx_mdio_device;
+void ar71xx_add_device_mdio(u32 phy_mask) __init;
+
+void ar71xx_add_device_uart(void) __init;
+
+void ar71xx_add_device_wdt(void) __init;
+
+#endif /* __AR71XX_DEVICES_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-leds-gpio.c linux-2.6.35.7/arch/mips/ar71xx/dev-leds-gpio.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-leds-gpio.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-leds-gpio.c	2010-10-14 20:27:56.545601257 +0200
@@ -0,0 +1,57 @@
+/*
+ *  Atheros AR71xx GPIO LED device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "dev-leds-gpio.h"
+
+void __init ar71xx_add_device_leds_gpio(int id, unsigned num_leds,
+					struct gpio_led *leds)
+{
+	struct platform_device *pdev;
+	struct gpio_led_platform_data pdata;
+	struct gpio_led *p;
+	int err;
+
+	p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return;
+
+	memcpy(p, leds, num_leds * sizeof(*p));
+
+	pdev = platform_device_alloc("leds-gpio", id);
+	if (!pdev)
+		goto err_free_leds;
+
+	memset(&pdata, 0, sizeof(pdata));
+	pdata.num_leds = num_leds;
+	pdata.leds = p;
+
+	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (err)
+		goto err_put_pdev;
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto err_put_pdev;
+
+	return;
+
+err_put_pdev:
+	platform_device_put(pdev);
+
+err_free_leds:
+	kfree(p);
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-leds-gpio.h linux-2.6.35.7/arch/mips/ar71xx/dev-leds-gpio.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-leds-gpio.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-leds-gpio.h	2010-10-14 20:27:56.595814317 +0200
@@ -0,0 +1,21 @@
+/*
+ *  Atheros AR71xx GPIO LED device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_LEDS_GPIO_H
+#define _AR71XX_DEV_LEDS_GPIO_H
+
+#include <linux/leds.h>
+
+void ar71xx_add_device_leds_gpio(int id,
+				 unsigned num_leds,
+				 struct gpio_led *leds) __init;
+
+#endif /* _AR71XX_DEV_LEDS_GPIO_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-m25p80.c linux-2.6.35.7/arch/mips/ar71xx/dev-m25p80.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-m25p80.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-m25p80.c	2010-10-14 20:27:56.645623230 +0200
@@ -0,0 +1,30 @@
+/*
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include "devices.h"
+#include "dev-m25p80.h"
+
+static struct spi_board_info ar71xx_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "m25p80",
+	}
+};
+
+void __init ar71xx_add_device_m25p80(struct flash_platform_data *pdata)
+{
+	ar71xx_spi_info[0].platform_data = pdata;
+	ar71xx_add_device_spi(NULL, ar71xx_spi_info,
+			      ARRAY_SIZE(ar71xx_spi_info));
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-m25p80.h linux-2.6.35.7/arch/mips/ar71xx/dev-m25p80.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-m25p80.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-m25p80.h	2010-10-14 20:27:56.695412366 +0200
@@ -0,0 +1,16 @@
+/*
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_M25P80_H
+#define _AR71XX_DEV_M25P80_H
+
+#include <linux/spi/flash.h>
+
+void ar71xx_add_device_m25p80(struct flash_platform_data *pdata) __init;
+
+#endif /* _AR71XX_DEV_M25P80_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-pb42-pci.c linux-2.6.35.7/arch/mips/ar71xx/dev-pb42-pci.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-pb42-pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-pb42-pci.c	2010-10-14 20:27:56.745266514 +0200
@@ -0,0 +1,40 @@
+/*
+ *  Atheros PB42 reference board PCI initialization
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#include "dev-pb42-pci.h"
+
+static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = {
+	{
+		.slot	= 0,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV0,
+	}, {
+		.slot	= 1,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV1,
+	}, {
+		.slot	= 2,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV2,
+	}
+};
+
+void __init pb42_pci_init(void)
+{
+	ar71xx_pci_init(ARRAY_SIZE(pb42_pci_irqs), pb42_pci_irqs);
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-pb42-pci.h linux-2.6.35.7/arch/mips/ar71xx/dev-pb42-pci.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-pb42-pci.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-pb42-pci.h	2010-10-14 20:27:56.795082429 +0200
@@ -0,0 +1,21 @@
+/*
+ *  Atheros PB42 reference board PCI initialization
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_PB42_PCI_H
+#define _AR71XX_DEV_PB42_PCI_H
+
+#if defined(CONFIG_AR71XX_DEV_PB42_PCI)
+void pb42_pci_init(void) __init;
+#else
+static inline void pb42_pci_init(void) { }
+#endif
+
+#endif /* _AR71XX_DEV_PB42_PCI_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-pb9x-pci.c linux-2.6.35.7/arch/mips/ar71xx/dev-pb9x-pci.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-pb9x-pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-pb9x-pci.c	2010-10-14 20:27:56.844918541 +0200
@@ -0,0 +1,33 @@
+/*
+ *  Atheros PB9x reference board PCI initialization
+ *
+ *  Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#include "dev-pb9x-pci.h"
+
+static struct ar71xx_pci_irq pb9x_pci_irqs[] __initdata = {
+	{
+		.slot	= 0,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV0,
+	}
+};
+
+void __init pb9x_pci_init(void)
+{
+	ar71xx_pci_init(ARRAY_SIZE(pb9x_pci_irqs), pb9x_pci_irqs);
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-pb9x-pci.h linux-2.6.35.7/arch/mips/ar71xx/dev-pb9x-pci.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-pb9x-pci.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-pb9x-pci.h	2010-10-14 20:27:56.894720777 +0200
@@ -0,0 +1,22 @@
+/*
+ *  Atheros PB9x reference board PCI initialization
+ *
+ *  Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_PB9X_PCI_H
+#define _AR71XX_DEV_PB9X_PCI_H
+
+#if defined(CONFIG_AR71XX_DEV_PB9X_PCI)
+void pb9x_pci_init(void) __init;
+#else
+static inline void pb9x_pci_init(void) { }
+#endif
+
+#endif /* _AR71XX_DEV_PB9X_PCI_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-usb.c linux-2.6.35.7/arch/mips/ar71xx/dev-usb.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-usb.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-usb.c	2010-10-14 20:27:56.944533864 +0200
@@ -0,0 +1,181 @@
+/*
+ *  Atheros AR71xx USB host device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/platform.h>
+
+#include "dev-usb.h"
+
+/*
+ * OHCI (USB full speed host controller)
+ */
+static struct resource ar71xx_ohci_resources[] = {
+	[0] = {
+		.start	= AR71XX_OHCI_BASE,
+		.end	= AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AR71XX_MISC_IRQ_OHCI,
+		.end	= AR71XX_MISC_IRQ_OHCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource ar7240_ohci_resources[] = {
+	[0] = {
+		.start	= AR7240_OHCI_BASE,
+		.end	= AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AR71XX_CPU_IRQ_USB,
+		.end	= AR71XX_CPU_IRQ_USB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ar71xx_ohci_dmamask = DMA_BIT_MASK(32);
+static struct platform_device ar71xx_ohci_device = {
+	.name		= "ar71xx-ohci",
+	.id		= -1,
+	.resource	= ar71xx_ohci_resources,
+	.num_resources	= ARRAY_SIZE(ar71xx_ohci_resources),
+	.dev = {
+		.dma_mask		= &ar71xx_ohci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+/*
+ * EHCI (USB full speed host controller)
+ */
+static struct resource ar71xx_ehci_resources[] = {
+	[0] = {
+		.start	= AR71XX_EHCI_BASE,
+		.end	= AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AR71XX_CPU_IRQ_USB,
+		.end	= AR71XX_CPU_IRQ_USB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ar71xx_ehci_dmamask = DMA_BIT_MASK(32);
+static struct ar71xx_ehci_platform_data ar71xx_ehci_data;
+
+static struct platform_device ar71xx_ehci_device = {
+	.name		= "ar71xx-ehci",
+	.id		= -1,
+	.resource	= ar71xx_ehci_resources,
+	.num_resources	= ARRAY_SIZE(ar71xx_ehci_resources),
+	.dev = {
+		.dma_mask		= &ar71xx_ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &ar71xx_ehci_data,
+	},
+};
+
+#define AR71XX_USB_RESET_MASK \
+	(RESET_MODULE_USB_HOST | RESET_MODULE_USB_PHY \
+	| RESET_MODULE_USB_OHCI_DLL)
+
+#define AR7240_USB_RESET_MASK \
+	(RESET_MODULE_USB_HOST | RESET_MODULE_USB_OHCI_DLL_7240)
+
+static void __init ar71xx_usb_setup(void)
+{
+	ar71xx_device_stop(AR71XX_USB_RESET_MASK);
+	mdelay(1000);
+	ar71xx_device_start(AR71XX_USB_RESET_MASK);
+
+	/* Turning on the Buff and Desc swap bits */
+	ar71xx_usb_ctrl_wr(USB_CTRL_REG_CONFIG, 0xf0000);
+
+	/* WAR for HW bug. Here it adjusts the duration between two SOFS */
+	ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x20c00);
+
+	mdelay(900);
+
+	platform_device_register(&ar71xx_ohci_device);
+	platform_device_register(&ar71xx_ehci_device);
+}
+
+static void __init ar7240_usb_setup(void)
+{
+	ar71xx_device_stop(AR7240_USB_RESET_MASK);
+	mdelay(1000);
+	ar71xx_device_start(AR7240_USB_RESET_MASK);
+
+	/* WAR for HW bug. Here it adjusts the duration between two SOFS */
+	ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x3);
+
+	if (ar71xx_soc == AR71XX_SOC_AR7241 || ar71xx_soc == AR71XX_SOC_AR7242) {
+		ar71xx_ehci_data.is_ar91xx = 1;
+		ar71xx_ehci_device.resource = ar7240_ohci_resources;
+		ar71xx_ehci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources);
+		platform_device_register(&ar71xx_ehci_device);
+	} else {
+		ar71xx_ohci_device.resource = ar7240_ohci_resources;
+		ar71xx_ohci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources);
+		platform_device_register(&ar71xx_ohci_device);
+	}
+}
+
+static void __init ar91xx_usb_setup(void)
+{
+	ar71xx_device_stop(RESET_MODULE_USBSUS_OVERRIDE);
+	mdelay(10);
+
+	ar71xx_device_start(RESET_MODULE_USB_HOST);
+	mdelay(10);
+
+	ar71xx_device_start(RESET_MODULE_USB_PHY);
+	mdelay(10);
+
+	ar71xx_ehci_data.is_ar91xx = 1;
+	platform_device_register(&ar71xx_ehci_device);
+}
+
+void __init ar71xx_add_device_usb(void)
+{
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		ar7240_usb_setup();
+		break;
+
+	case AR71XX_SOC_AR7130:
+	case AR71XX_SOC_AR7141:
+	case AR71XX_SOC_AR7161:
+		ar71xx_usb_setup();
+		break;
+
+	case AR71XX_SOC_AR9130:
+	case AR71XX_SOC_AR9132:
+		ar91xx_usb_setup();
+		break;
+
+	default:
+		BUG();
+	}
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/dev-usb.h linux-2.6.35.7/arch/mips/ar71xx/dev-usb.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/dev-usb.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/dev-usb.h	2010-10-14 20:27:56.994353425 +0200
@@ -0,0 +1,17 @@
+/*
+ *  Atheros AR71xx USB host device support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_USB_H
+#define _AR71XX_DEV_USB_H
+
+void ar71xx_add_device_usb(void) __init;
+
+#endif /* _AR71XX_DEV_USB_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/early_printk.c linux-2.6.35.7/arch/mips/ar71xx/early_printk.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/early_printk.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/early_printk.c	2010-10-14 20:27:57.044356938 +0200
@@ -0,0 +1,30 @@
+/*
+ *  Atheros AR71xx SoC early printk support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/serial_reg.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#define UART_READ(r) \
+	__raw_readl((void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE) + 4 * (r)))
+
+#define UART_WRITE(r, v) \
+	__raw_writel((v), (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE) + 4*(r)))
+
+void prom_putchar(unsigned char ch)
+{
+	while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
+	UART_WRITE(UART_TX, ch);
+	while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
+}
+
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/gpio.c linux-2.6.35.7/arch/mips/ar71xx/gpio.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/gpio.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/gpio.c	2010-10-14 20:27:57.084356695 +0200
@@ -0,0 +1,182 @@
+/*
+ *  Atheros AR71xx SoC GPIO API support
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+static DEFINE_SPINLOCK(ar71xx_gpio_lock);
+
+unsigned long ar71xx_gpio_count;
+EXPORT_SYMBOL(ar71xx_gpio_count);
+
+void __ar71xx_gpio_set_value(unsigned gpio, int value)
+{
+	void __iomem *base = ar71xx_gpio_base;
+
+	if (value)
+		__raw_writel(1 << gpio, base + GPIO_REG_SET);
+	else
+		__raw_writel(1 << gpio, base + GPIO_REG_CLEAR);
+}
+EXPORT_SYMBOL(__ar71xx_gpio_set_value);
+
+int __ar71xx_gpio_get_value(unsigned gpio)
+{
+	return (__raw_readl(ar71xx_gpio_base + GPIO_REG_IN) >> gpio) & 1;
+}
+EXPORT_SYMBOL(__ar71xx_gpio_get_value);
+
+static int ar71xx_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	return __ar71xx_gpio_get_value(offset);
+}
+
+static void ar71xx_gpio_set_value(struct gpio_chip *chip,
+				  unsigned offset, int value)
+{
+	__ar71xx_gpio_set_value(offset, value);
+}
+
+static int ar71xx_gpio_direction_input(struct gpio_chip *chip,
+				       unsigned offset)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ar71xx_gpio_lock, flags);
+
+	__raw_writel(__raw_readl(base + GPIO_REG_OE) & ~(1 << offset),
+		     base + GPIO_REG_OE);
+
+	spin_unlock_irqrestore(&ar71xx_gpio_lock, flags);
+
+	return 0;
+}
+
+static int ar71xx_gpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ar71xx_gpio_lock, flags);
+
+	if (value)
+		__raw_writel(1 << offset, base + GPIO_REG_SET);
+	else
+		__raw_writel(1 << offset, base + GPIO_REG_CLEAR);
+
+	__raw_writel(__raw_readl(base + GPIO_REG_OE) | (1 << offset),
+		     base + GPIO_REG_OE);
+
+	spin_unlock_irqrestore(&ar71xx_gpio_lock, flags);
+
+	return 0;
+}
+
+static struct gpio_chip ar71xx_gpio_chip = {
+	.label			= "ar71xx",
+	.get			= ar71xx_gpio_get_value,
+	.set			= ar71xx_gpio_set_value,
+	.direction_input	= ar71xx_gpio_direction_input,
+	.direction_output	= ar71xx_gpio_direction_output,
+	.base			= 0,
+	.ngpio			= AR71XX_GPIO_COUNT,
+};
+
+void ar71xx_gpio_function_enable(u32 mask)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ar71xx_gpio_lock, flags);
+
+	__raw_writel(__raw_readl(base + GPIO_REG_FUNC) | mask,
+		     base + GPIO_REG_FUNC);
+	/* flush write */
+	(void) __raw_readl(base + GPIO_REG_FUNC);
+
+	spin_unlock_irqrestore(&ar71xx_gpio_lock, flags);
+}
+
+void ar71xx_gpio_function_disable(u32 mask)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ar71xx_gpio_lock, flags);
+
+	__raw_writel(__raw_readl(base + GPIO_REG_FUNC) & ~mask,
+		     base + GPIO_REG_FUNC);
+	/* flush write */
+	(void) __raw_readl(base + GPIO_REG_FUNC);
+
+	spin_unlock_irqrestore(&ar71xx_gpio_lock, flags);
+}
+
+void ar71xx_gpio_function_setup(u32 set, u32 clear)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ar71xx_gpio_lock, flags);
+
+	__raw_writel((__raw_readl(base + GPIO_REG_FUNC) & ~clear) | set,
+		     base + GPIO_REG_FUNC);
+	/* flush write */
+	(void) __raw_readl(base + GPIO_REG_FUNC);
+
+	spin_unlock_irqrestore(&ar71xx_gpio_lock, flags);
+}
+EXPORT_SYMBOL(ar71xx_gpio_function_setup);
+
+void __init ar71xx_gpio_init(void)
+{
+	int err;
+
+	if (!request_mem_region(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
+				"AR71xx GPIO controller"))
+		panic("cannot allocate AR71xx GPIO registers page");
+
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7130:
+	case AR71XX_SOC_AR7141:
+	case AR71XX_SOC_AR7161:
+		ar71xx_gpio_chip.ngpio = AR71XX_GPIO_COUNT;
+		break;
+
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		ar71xx_gpio_chip.ngpio = AR724X_GPIO_COUNT;
+		break;
+
+	case AR71XX_SOC_AR9130:
+	case AR71XX_SOC_AR9132:
+		ar71xx_gpio_chip.ngpio = AR91XX_GPIO_COUNT;
+		break;
+
+	default:
+		BUG();
+	}
+
+	err = gpiochip_add(&ar71xx_gpio_chip);
+	if (err)
+		panic("cannot add AR71xx GPIO chip, error=%d", err);
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/irq.c linux-2.6.35.7/arch/mips/ar71xx/irq.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/irq.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/irq.c	2010-10-14 20:27:57.135484452 +0200
@@ -0,0 +1,295 @@
+/*
+ *  Atheros AR71xx SoC specific interrupt handling
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+static int ip2_flush_reg;
+
+static void ar71xx_gpio_irq_dispatch(void)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	u32 pending;
+
+	pending = __raw_readl(base + GPIO_REG_INT_PENDING) &
+		  __raw_readl(base + GPIO_REG_INT_ENABLE);
+
+	if (pending)
+		do_IRQ(AR71XX_GPIO_IRQ_BASE + fls(pending) - 1);
+	else
+		spurious_interrupt();
+}
+
+static void ar71xx_gpio_irq_unmask(unsigned int irq)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	u32 t;
+
+	irq -= AR71XX_GPIO_IRQ_BASE;
+
+	t = __raw_readl(base + GPIO_REG_INT_ENABLE);
+	__raw_writel(t | (1 << irq), base + GPIO_REG_INT_ENABLE);
+
+	/* flush write */
+	(void) __raw_readl(base + GPIO_REG_INT_ENABLE);
+}
+
+static void ar71xx_gpio_irq_mask(unsigned int irq)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	u32 t;
+
+	irq -= AR71XX_GPIO_IRQ_BASE;
+
+	t = __raw_readl(base + GPIO_REG_INT_ENABLE);
+	__raw_writel(t & ~(1 << irq), base + GPIO_REG_INT_ENABLE);
+
+	/* flush write */
+	(void) __raw_readl(base + GPIO_REG_INT_ENABLE);
+}
+
+#if 0
+static int ar71xx_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	/* TODO: implement */
+	return 0;
+}
+#else
+#define ar71xx_gpio_irq_set_type	NULL
+#endif
+
+static struct irq_chip ar71xx_gpio_irq_chip = {
+	.name		= "AR71XX GPIO",
+	.unmask		= ar71xx_gpio_irq_unmask,
+	.mask		= ar71xx_gpio_irq_mask,
+	.mask_ack	= ar71xx_gpio_irq_mask,
+	.set_type	= ar71xx_gpio_irq_set_type,
+};
+
+static struct irqaction ar71xx_gpio_irqaction = {
+	.handler	= no_action,
+	.name		= "cascade [AR71XX GPIO]",
+};
+
+#define GPIO_IRQ_INIT_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
+#define GPIO_INT_ALL	0xffff
+
+static void __init ar71xx_gpio_irq_init(void)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	int i;
+
+	__raw_writel(0, base + GPIO_REG_INT_ENABLE);
+	__raw_writel(0, base + GPIO_REG_INT_PENDING);
+
+	/* setup type of all GPIO interrupts to level sensitive */
+	__raw_writel(GPIO_INT_ALL, base + GPIO_REG_INT_TYPE);
+
+	/* setup polarity of all GPIO interrupts to active high */
+	__raw_writel(GPIO_INT_ALL, base + GPIO_REG_INT_POLARITY);
+
+	for (i = AR71XX_GPIO_IRQ_BASE;
+	     i < AR71XX_GPIO_IRQ_BASE + AR71XX_GPIO_IRQ_COUNT; i++) {
+		irq_desc[i].status = GPIO_IRQ_INIT_STATUS;
+		set_irq_chip_and_handler(i, &ar71xx_gpio_irq_chip,
+					 handle_level_irq);
+	}
+
+	setup_irq(AR71XX_MISC_IRQ_GPIO, &ar71xx_gpio_irqaction);
+}
+
+static void ar71xx_misc_irq_dispatch(void)
+{
+	u32 pending;
+
+	pending = ar71xx_reset_rr(AR71XX_RESET_REG_MISC_INT_STATUS)
+	    & ar71xx_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
+
+	if (pending & MISC_INT_UART)
+		do_IRQ(AR71XX_MISC_IRQ_UART);
+
+	else if (pending & MISC_INT_DMA)
+		do_IRQ(AR71XX_MISC_IRQ_DMA);
+
+	else if (pending & MISC_INT_PERFC)
+		do_IRQ(AR71XX_MISC_IRQ_PERFC);
+
+	else if (pending & MISC_INT_TIMER)
+		do_IRQ(AR71XX_MISC_IRQ_TIMER);
+
+	else if (pending & MISC_INT_OHCI)
+		do_IRQ(AR71XX_MISC_IRQ_OHCI);
+
+	else if (pending & MISC_INT_ERROR)
+		do_IRQ(AR71XX_MISC_IRQ_ERROR);
+
+	else if (pending & MISC_INT_GPIO)
+		ar71xx_gpio_irq_dispatch();
+
+	else if (pending & MISC_INT_WDOG)
+		do_IRQ(AR71XX_MISC_IRQ_WDOG);
+
+	else
+		spurious_interrupt();
+}
+
+static void ar71xx_misc_irq_unmask(unsigned int irq)
+{
+	void __iomem *base = ar71xx_reset_base;
+	u32 t;
+
+	irq -= AR71XX_MISC_IRQ_BASE;
+
+	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+
+	/* flush write */
+	(void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+}
+
+static void ar71xx_misc_irq_mask(unsigned int irq)
+{
+	void __iomem *base = ar71xx_reset_base;
+	u32 t;
+
+	irq -= AR71XX_MISC_IRQ_BASE;
+
+	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+
+	/* flush write */
+	(void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+}
+
+static void ar724x_misc_irq_ack(unsigned int irq)
+{
+	void __iomem *base = ar71xx_reset_base;
+	u32 t;
+
+	irq -= AR71XX_MISC_IRQ_BASE;
+
+	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
+	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_STATUS);
+
+	/* flush write */
+	(void) __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
+}
+
+static struct irq_chip ar71xx_misc_irq_chip = {
+	.name		= "AR71XX MISC",
+	.unmask		= ar71xx_misc_irq_unmask,
+	.mask		= ar71xx_misc_irq_mask,
+};
+
+static struct irqaction ar71xx_misc_irqaction = {
+	.handler	= no_action,
+	.name		= "cascade [AR71XX MISC]",
+};
+
+static void __init ar71xx_misc_irq_init(void)
+{
+	void __iomem *base = ar71xx_reset_base;
+	int i;
+
+	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
+
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		ar71xx_misc_irq_chip.ack = ar724x_misc_irq_ack;
+		break;
+	default:
+		ar71xx_misc_irq_chip.mask_ack = ar71xx_misc_irq_mask;
+		break;
+	}
+
+	for (i = AR71XX_MISC_IRQ_BASE;
+	     i < AR71XX_MISC_IRQ_BASE + AR71XX_MISC_IRQ_COUNT; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		set_irq_chip_and_handler(i, &ar71xx_misc_irq_chip,
+					 handle_level_irq);
+	}
+
+	setup_irq(AR71XX_CPU_IRQ_MISC, &ar71xx_misc_irqaction);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned long pending;
+
+	pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(AR71XX_CPU_IRQ_TIMER);
+
+	else if (pending & STATUSF_IP2) {
+		/*
+		 * This IRQ is meant for a PCI device. Drivers for PCI devices
+		 * typically allocate coherent DMA memory for the descriptor
+		 * ring, however the DMA controller may still have some
+		 * unsynchronized data in the FIFO.
+		 * Issue a flush here to ensure that the driver sees the update.
+		 */
+		ar71xx_ddr_flush(ip2_flush_reg);
+		do_IRQ(AR71XX_CPU_IRQ_IP2);
+	}
+
+	else if (pending & STATUSF_IP4)
+		do_IRQ(AR71XX_CPU_IRQ_GE0);
+
+	else if (pending & STATUSF_IP5)
+		do_IRQ(AR71XX_CPU_IRQ_GE1);
+
+	else if (pending & STATUSF_IP3)
+		do_IRQ(AR71XX_CPU_IRQ_USB);
+
+	else if (pending & STATUSF_IP6)
+		ar71xx_misc_irq_dispatch();
+
+	else
+		spurious_interrupt();
+}
+
+void __init arch_init_irq(void)
+{
+	switch(ar71xx_soc) {
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		ip2_flush_reg = AR724X_DDR_REG_FLUSH_PCIE;
+		break;
+	case AR71XX_SOC_AR9130:
+	case AR71XX_SOC_AR9132:
+		ip2_flush_reg = AR91XX_DDR_REG_FLUSH_WMAC;
+		break;
+	default:
+		ip2_flush_reg = AR71XX_DDR_REG_FLUSH_PCI;
+		break;
+	}
+	mips_cpu_irq_init();
+
+	ar71xx_misc_irq_init();
+
+	cp0_perfcount_irq = AR71XX_MISC_IRQ_PERFC;
+
+	ar71xx_gpio_irq_init();
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/Kconfig linux-2.6.35.7/arch/mips/ar71xx/Kconfig
--- linux-2.6.35.7.orig/arch/mips/ar71xx/Kconfig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/Kconfig	2010-10-14 20:27:57.185337757 +0200
@@ -0,0 +1,264 @@
+if ATHEROS_AR71XX
+
+menu "Atheros AR71xx machine selection"
+
+config AR71XX_MACH_AP81
+	bool "Atheros AP81 board support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default n
+
+config AR71XX_MACH_AP83
+	bool "Atheros AP83 board support"
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default n
+
+config AR71XX_MACH_DIR_600_A1
+	bool "D-Link DIR-600 rev. A1 support"
+	select AR71XX_DEV_AP91_ETH
+	select AR71XX_DEV_AP91_PCI if PCI
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_NVRAM
+	default n
+
+config AR71XX_MACH_DIR_615_C1
+	bool "D-Link DIR-615 rev. C1 support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_NVRAM
+	default n
+
+config AR71XX_MACH_DIR_825_B1
+	bool "D-Link DIR-825 rev. B1 board support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AP94_PCI if PCI
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default n
+
+config AR71XX_MACH_PB42
+	bool "Atheros PB42 board support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_PB42_PCI if PCI
+	default n
+
+config AR71XX_MACH_PB44
+	bool "Atheros PB44 board support"
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_PB42_PCI if PCI
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default n
+
+config AR71XX_MACH_PB92
+	bool "Atheros PB92 board support"
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_PB9X_PCI if PCI
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default n
+
+config AR71XX_MACH_AW_NR580
+	bool "AzureWave AW-NR580 board support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_PB42_PCI if PCI
+	select AR71XX_DEV_LEDS_GPIO
+	default n
+
+config AR71XX_MACH_WZR_HP_G300NH
+	bool "Buffalo WZR-HP-G300NH board support"
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default y
+
+config AR71XX_MACH_WP543
+	bool "Compex WP543/WPJ543 board support"
+	select MYLOADER
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_PB42_PCI if PCI
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default n
+
+config AR71XX_MACH_WRT160NL
+	bool "Linksys WRT160NL board support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	select AR71XX_NVRAM
+	default n
+
+config AR71XX_MACH_WRT400N
+	bool "Linksys WRT400N board support"
+	select AR71XX_DEV_AP94_PCI if PCI
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	default n
+
+config AR71XX_MACH_RB4XX
+	bool "MikroTik RouterBOARD 4xx series support"
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default n
+
+config AR71XX_MACH_RB750
+	bool "MikroTik RouterBOARD 750 support"
+	select AR71XX_DEV_AP91_ETH
+	default n
+
+config AR71XX_MACH_WNDR3700
+	bool "NETGEAR WNDR3700 board support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AP94_PCI if PCI
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default n
+
+config AR71XX_MACH_WNR2000
+	bool "NETGEAR WNR2000 board support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	default n
+
+config AR71XX_MACH_MZK_W04NU
+	bool "Planex MZK-W04NU board support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default n
+
+config AR71XX_MACH_MZK_W300NH
+	bool "Planex MZK-W300NH board support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	default n
+
+config AR71XX_MACH_NBG460N
+	bool "Zyxel NBG460N/550N/550NH board support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	default n
+	
+config AR71XX_MACH_TL_WR741ND
+	bool "TP-LINK TL-WR741ND support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AP91_ETH
+	select AR71XX_DEV_AP91_PCI if PCI
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	default n
+
+config AR71XX_MACH_TL_WR841N_V1
+	bool "TP-LINK TL-WR841N v1 support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_PB42_PCI if PCI
+	select AR71XX_DEV_DSA
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	default n
+
+config AR71XX_MACH_TL_WR941ND
+	bool "TP-LINK TL-WR941ND support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_DSA
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	default n
+
+config AR71XX_MACH_TL_WR1043ND
+	bool "TP-LINK TL-WR1043ND support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+	default n
+
+config AR71XX_MACH_TEW_632BRP
+	bool "TRENDnet TEW-632BRP support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_NVRAM
+	default n
+
+config AR71XX_MACH_UBNT
+	bool "Ubiquiti AR71xx based boards support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_AP91_PCI if PCI
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_PB42_PCI if PCI
+	select AR71XX_DEV_USB
+	default n
+
+endmenu
+
+config AR71XX_DEV_M25P80
+	def_bool n
+
+config AR71XX_DEV_AP91_PCI
+	def_bool n
+
+config AR71XX_DEV_AP91_ETH
+	def_bool n
+
+config AR71XX_DEV_AP94_PCI
+	def_bool n
+
+config AR71XX_DEV_AR913X_WMAC
+	def_bool n
+
+config AR71XX_DEV_DSA
+	def_bool n
+
+config AR71XX_DEV_GPIO_BUTTONS
+	def_bool n
+
+config AR71XX_DEV_LEDS_GPIO
+	def_bool n
+
+config AR71XX_DEV_PB42_PCI
+	def_bool n
+
+config AR71XX_DEV_PB9X_PCI
+	def_bool n
+
+config AR71XX_DEV_USB
+	def_bool n
+
+config AR71XX_NVRAM
+	def_bool n
+
+endif
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-ap81.c linux-2.6.35.7/arch/mips/ar71xx/mach-ap81.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-ap81.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-ap81.c	2010-10-14 20:27:57.235141599 +0200
@@ -0,0 +1,140 @@
+/*
+ *  Atheros AP81 board support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define AP81_GPIO_LED_STATUS	1
+#define AP81_GPIO_LED_AOSS	3
+#define AP81_GPIO_LED_WLAN	6
+#define AP81_GPIO_LED_POWER	14
+
+#define AP81_GPIO_BTN_SW4	12
+#define AP81_GPIO_BTN_SW1	21
+
+#define AP81_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition ap81_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x040000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "u-boot-env",
+		.offset		= 0x040000,
+		.size		= 0x010000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x050000,
+		.size		= 0x500000,
+	} , {
+		.name		= "uImage",
+		.offset		= 0x550000,
+		.size		= 0x100000,
+	} , {
+		.name		= "ART",
+		.offset		= 0x650000,
+		.size		= 0x1b0000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data ap81_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = ap81_partitions,
+        .nr_parts       = ARRAY_SIZE(ap81_partitions),
+#endif
+};
+
+static struct gpio_led ap81_leds_gpio[] __initdata = {
+	{
+		.name		= "ap81:green:status",
+		.gpio		= AP81_GPIO_LED_STATUS,
+		.active_low	= 1,
+	}, {
+		.name		= "ap81:amber:aoss",
+		.gpio		= AP81_GPIO_LED_AOSS,
+		.active_low	= 1,
+	}, {
+		.name		= "ap81:green:wlan",
+		.gpio		= AP81_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}, {
+		.name		= "ap81:green:power",
+		.gpio		= AP81_GPIO_LED_POWER,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button ap81_gpio_buttons[] __initdata = {
+	{
+		.desc		= "sw1",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.threshold	= 3,
+		.gpio		= AP81_GPIO_BTN_SW1,
+		.active_low	= 1,
+	} , {
+		.desc		= "sw4",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.threshold	= 3,
+		.gpio		= AP81_GPIO_BTN_SW4,
+		.active_low	= 1,
+	}
+};
+
+static void __init ap81_setup(void)
+{
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(eeprom);
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_data.has_ar8216 = 1;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = 0x10;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_usb();
+
+	ar71xx_add_device_m25p80(&ap81_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
+					ap81_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, AP81_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(ap81_gpio_buttons),
+					ap81_gpio_buttons);
+
+	ar913x_add_device_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-ap83.c linux-2.6.35.7/arch/mips/ar71xx/mach-ap83.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-ap83.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-ap83.c	2010-10-14 20:27:57.284350521 +0200
@@ -0,0 +1,266 @@
+/*
+ *  Atheros AP83 board support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/vsc7385.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/ar91xx_flash.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define AP83_GPIO_LED_WLAN	6
+#define AP83_GPIO_LED_POWER	14
+#define AP83_GPIO_LED_JUMPSTART	15
+#define AP83_GPIO_BTN_JUMPSTART	12
+#define AP83_GPIO_BTN_RESET	21
+
+#define AP83_050_GPIO_VSC7385_CS	1
+#define AP83_050_GPIO_VSC7385_MISO	3
+#define AP83_050_GPIO_VSC7385_MOSI	16
+#define AP83_050_GPIO_VSC7385_SCK	17
+
+#define AP83_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition ap83_flash_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x040000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "u-boot-env",
+		.offset		= 0x040000,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x060000,
+		.size		= 0x140000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x1a0000,
+		.size		= 0x650000,
+	} , {
+		.name		= "art",
+		.offset		= 0x7f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x060000,
+		.size		= 0x790000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct ar91xx_flash_platform_data ap83_flash_data = {
+	.width		= 2,
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = ap83_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(ap83_flash_partitions),
+#endif
+};
+
+static struct resource ap83_flash_resources[] = {
+	[0] = {
+		.start	= AR71XX_SPI_BASE,
+		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ap83_flash_device = {
+	.name		= "ar91xx-flash",
+	.id		= -1,
+	.resource	= ap83_flash_resources,
+	.num_resources	= ARRAY_SIZE(ap83_flash_resources),
+	.dev		= {
+		.platform_data = &ap83_flash_data,
+	}
+};
+
+static struct gpio_led ap83_leds_gpio[] __initdata = {
+	{
+		.name		= "ap83:green:jumpstart",
+		.gpio		= AP83_GPIO_LED_JUMPSTART,
+		.active_low	= 0,
+	}, {
+		.name		= "ap83:green:power",
+		.gpio		= AP83_GPIO_LED_POWER,
+		.active_low	= 0,
+	}, {
+		.name		= "ap83:green:wlan",
+		.gpio		= AP83_GPIO_LED_WLAN,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_button ap83_gpio_buttons[] __initdata = {
+	{
+		.desc		= "soft_reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= AP83_GPIO_BTN_RESET,
+		.active_low	= 1,
+	} , {
+		.desc		= "jumpstart",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= AP83_GPIO_BTN_JUMPSTART,
+		.active_low	= 1,
+	}
+};
+
+static struct resource ap83_040_spi_resources[] = {
+	[0] = {
+		.start	= AR71XX_SPI_BASE,
+		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ap83_040_spi_device = {
+	.name		= "ap83-spi",
+	.id		= 0,
+	.resource	= ap83_040_spi_resources,
+	.num_resources	= ARRAY_SIZE(ap83_040_spi_resources),
+};
+
+static struct spi_gpio_platform_data ap83_050_spi_data = {
+	.miso	= AP83_050_GPIO_VSC7385_MISO,
+	.mosi	= AP83_050_GPIO_VSC7385_MOSI,
+	.sck	= AP83_050_GPIO_VSC7385_SCK,
+	.num_chipselect = 1,
+};
+
+static struct platform_device ap83_050_spi_device = {
+	.name		= "spi_gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &ap83_050_spi_data,
+	}
+};
+
+static void ap83_vsc7385_reset(void)
+{
+	ar71xx_device_stop(RESET_MODULE_GE1_PHY);
+	udelay(10);
+	ar71xx_device_start(RESET_MODULE_GE1_PHY);
+	mdelay(50);
+}
+
+static struct vsc7385_platform_data ap83_vsc7385_data = {
+	.reset		= ap83_vsc7385_reset,
+	.ucode_name	= "vsc7385_ucode_ap83.bin",
+	.mac_cfg = {
+		.tx_ipg		= 6,
+		.bit2		= 0,
+		.clk_sel	= 3,
+	},
+};
+
+static struct spi_board_info ap83_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "spi-vsc7385",
+		.platform_data	= &ap83_vsc7385_data,
+		.controller_data = (void *) AP83_050_GPIO_VSC7385_CS,
+	}
+};
+
+static void __init ap83_generic_setup(void)
+{
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(eeprom);
+
+	ar71xx_add_device_mdio(0xfffffffe);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.phy_mask = 0x1;
+
+	ar71xx_add_device_eth(0);
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth1_data.speed = SPEED_1000;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_pll_data.pll_1000 = 0x1f000000;
+
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
+					ap83_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, AP83_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(ap83_gpio_buttons),
+					ap83_gpio_buttons);
+
+	ar71xx_add_device_usb();
+
+	ar913x_add_device_wmac(eeprom, NULL);
+
+	platform_device_register(&ap83_flash_device);
+
+	spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info));
+}
+
+static void __init ap83_040_setup(void)
+{
+	ap83_flash_data.is_shared=1;
+	ap83_generic_setup();
+	platform_device_register(&ap83_040_spi_device);
+}
+
+static void __init ap83_050_setup(void)
+{
+	ap83_generic_setup();
+	platform_device_register(&ap83_050_spi_device);
+}
+
+static void __init ap83_setup(void)
+{
+	u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244);
+	unsigned int board_version;
+
+	board_version = (unsigned int)(board_id[0] - '0');
+	board_version += ((unsigned int)(board_id[1] - '0')) * 10;
+
+	switch (board_version) {
+	case 40:
+		ap83_040_setup();
+		break;
+	case 50:
+		ap83_050_setup();
+		break;
+	default:
+		printk(KERN_WARNING "AP83-%03u board is not yet supported\n",
+		       board_version);
+	}
+}
+
+MIPS_MACHINE(AR71XX_MACH_AP83, "AP83", "Atheros AP83", ap83_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-aw-nr580.c linux-2.6.35.7/arch/mips/ar71xx/mach-aw-nr580.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-aw-nr580.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-aw-nr580.c	2010-10-14 20:27:57.334787684 +0200
@@ -0,0 +1,101 @@
+/*
+ *  AzureWave AW-NR580 board support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mips_machine.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-leds-gpio.h"
+
+#define AW_NR580_GPIO_LED_READY_RED	0
+#define AW_NR580_GPIO_LED_WLAN		1
+#define AW_NR580_GPIO_LED_READY_GREEN	2
+#define AW_NR580_GPIO_LED_WPS_GREEN	4
+#define AW_NR580_GPIO_LED_WPS_AMBER	5
+
+#define AW_NR580_GPIO_BTN_WPS		3
+#define AW_NR580_GPIO_BTN_RESET		11
+
+#define AW_NR580_BUTTONS_POLL_INTERVAL	20
+
+static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
+	{
+		.name		= "aw-nr580:red:ready",
+		.gpio		= AW_NR580_GPIO_LED_READY_RED,
+		.active_low	= 0,
+	}, {
+		.name		= "aw-nr580:green:ready",
+		.gpio		= AW_NR580_GPIO_LED_READY_GREEN,
+		.active_low	= 0,
+	}, {
+		.name		= "aw-nr580:green:wps",
+		.gpio		= AW_NR580_GPIO_LED_WPS_GREEN,
+		.active_low	= 0,
+	}, {
+		.name		= "aw-nr580:amber:wps",
+		.gpio		= AW_NR580_GPIO_LED_WPS_AMBER,
+		.active_low	= 0,
+	}, {
+		.name		= "aw-nr580:green:wlan",
+		.gpio		= AW_NR580_GPIO_LED_WLAN,
+		.active_low	= 0,
+	}
+};
+
+static struct gpio_button aw_nr580_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= AW_NR580_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= AW_NR580_GPIO_BTN_WPS,
+		.active_low	= 1,
+	}
+};
+
+static void __init aw_nr580_setup(void)
+{
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_add_device_eth(0);
+
+	pb42_pci_init();
+
+	ar71xx_add_device_m25p80(NULL);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
+					aw_nr580_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, AW_NR580_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(aw_nr580_gpio_buttons),
+					aw_nr580_gpio_buttons);
+}
+
+MIPS_MACHINE(AR71XX_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580",
+	     aw_nr580_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-dir-600-a1.c linux-2.6.35.7/arch/mips/ar71xx/mach-dir-600-a1.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-dir-600-a1.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-dir-600-a1.c	2010-10-14 20:27:57.384602615 +0200
@@ -0,0 +1,138 @@
+/*
+ *  D-Link DIR-600 rev. A1 board support
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-eth.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "nvram.h"
+
+#define DIR_600_A1_GPIO_LED_WPS			0
+#define DIR_600_A1_GPIO_LED_POWER_AMBER		1
+#define DIR_600_A1_GPIO_LED_POWER_GREEN		6
+
+#define DIR_600_A1_GPIO_BTN_RESET		8
+#define DIR_600_A1_GPIO_BTN_WPS			12
+
+#define DIR_600_A1_BUTTONS_POLL_INTERVAL	20
+
+#define DIR_600_A1_NVRAM_ADDR	0x1f030000
+#define DIR_600_A1_NVRAM_SIZE	0x10000
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition dir_600_a1_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x030000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "nvram",
+		.offset		= 0x030000,
+		.size		= 0x010000,
+	}, {
+		.name		= "kernel",
+		.offset		= 0x040000,
+		.size		= 0x0e0000,
+	}, {
+		.name		= "rootfs",
+		.offset		= 0x120000,
+		.size		= 0x2c0000,
+	}, {
+		.name		= "mac",
+		.offset		= 0x3e0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "art",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "firmware",
+		.offset		= 0x040000,
+		.size		= 0x3a0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data dir_600_a1_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = dir_600_a1_partitions,
+        .nr_parts       = ARRAY_SIZE(dir_600_a1_partitions),
+#endif
+};
+
+static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
+	{
+		.name		= "dir-600-a1:green:power",
+		.gpio		= DIR_600_A1_GPIO_LED_POWER_GREEN,
+	}, {
+		.name		= "dir-600-a1:amber:power",
+		.gpio		= DIR_600_A1_GPIO_LED_POWER_AMBER,
+	}, {
+		.name		= "dir-600-a1:blue:wps",
+		.gpio		= DIR_600_A1_GPIO_LED_WPS,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button dir_600_a1_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= DIR_600_A1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= DIR_600_A1_GPIO_BTN_WPS,
+		.active_low	= 1,
+	}
+};
+
+static void __init dir_600_a1_setup(void)
+{
+	const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+	u8 mac_buff[6];
+	u8 *mac = NULL;
+
+	if (nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE,
+			         "lan_mac=", mac_buff) == 0)
+		mac = mac_buff;
+
+	ar71xx_add_device_m25p80(&dir_600_a1_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
+					dir_600_a1_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, DIR_600_A1_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(dir_600_a1_gpio_buttons),
+					dir_600_a1_gpio_buttons);
+
+	ap91_eth_init(mac, NULL);
+	ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
+	     dir_600_a1_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-dir-615-c1.c linux-2.6.35.7/arch/mips/ar71xx/mach-dir-615-c1.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-dir-615-c1.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-dir-615-c1.c	2010-10-14 20:27:57.434406850 +0200
@@ -0,0 +1,173 @@
+/*
+ *  D-Link DIR-615 rev C1 board support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "nvram.h"
+
+#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1	/* ORANGE:STATUS:TRICOLOR */
+#define DIR_615C1_GPIO_LED_BLUE_WPS	3	/* BLUE:WPS */
+#define DIR_615C1_GPIO_LED_GREEN_WAN	4       /* GREEN:WAN:TRICOLOR */
+#define DIR_615C1_GPIO_LED_GREEN_WANCPU	5       /* GREEN:WAN:CPU:TRICOLOR */
+#define DIR_615C1_GPIO_LED_GREEN_WLAN	6	/* GREEN:WLAN */
+#define DIR_615C1_GPIO_LED_GREEN_STATUS	14	/* GREEN:STATUS:TRICOLOR */
+#define DIR_615C1_GPIO_LED_ORANGE_WAN	15	/* ORANGE:WAN:TRICOLOR */
+
+/* buttons may need refinement */
+
+#define DIR_615C1_GPIO_BTN_WPS		12
+#define DIR_615C1_GPIO_BTN_RESET	21
+
+#define DIR_615C1_BUTTONS_POLL_INTERVAL	20
+
+#define DIR_615C1_CONFIG_ADDR		0x1f020000
+#define DIR_615C1_CONFIG_SIZE		0x10000
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition dir_615c1_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "config",
+		.offset		= 0x020000,
+		.size		= 0x010000,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x030000,
+		.size		= 0x0d0000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x100000,
+		.size		= 0x2f0000,
+	} , {
+		.name		= "art",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x030000,
+		.size		= 0x3c0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data dir_615c1_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = dir_615c1_partitions,
+        .nr_parts       = ARRAY_SIZE(dir_615c1_partitions),
+#endif
+};
+
+static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
+	{
+		.name		= "dir-615c1:orange:status",
+		.gpio		= DIR_615C1_GPIO_LED_ORANGE_STATUS,
+		.active_low	= 1,
+	}, {
+		.name		= "dir-615c1:blue:wps",
+		.gpio		= DIR_615C1_GPIO_LED_BLUE_WPS,
+		.active_low	= 1,
+	}, {
+		.name		= "dir-615c1:green:wan",
+		.gpio		= DIR_615C1_GPIO_LED_GREEN_WAN,
+		.active_low	= 1,
+	}, {
+		.name		= "dir-615c1:green:wancpu",
+		.gpio		= DIR_615C1_GPIO_LED_GREEN_WANCPU,
+		.active_low	= 1,
+        }, {
+		.name		= "dir-615c1:green:wlan",
+		.gpio		= DIR_615C1_GPIO_LED_GREEN_WLAN,
+		.active_low	= 1,
+        }, {
+		.name           = "dir-615c1:green:status",
+		.gpio           = DIR_615C1_GPIO_LED_GREEN_STATUS,
+		.active_low     = 1,
+	}, {
+		.name		= "dir-615c1:orange:wan",
+		.gpio		= DIR_615C1_GPIO_LED_ORANGE_WAN,
+		.active_low	= 1,
+	}
+
+};
+
+static struct gpio_button dir_615c1_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= DIR_615C1_GPIO_BTN_RESET,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= DIR_615C1_GPIO_BTN_WPS,
+	}
+};
+
+#define DIR_615C1_LAN_PHYMASK	BIT(0)
+#define DIR_615C1_WAN_PHYMASK	BIT(4)
+#define DIR_615C1_MDIO_MASK	(~(DIR_615C1_LAN_PHYMASK | \
+				   DIR_615C1_WAN_PHYMASK))
+
+static void __init dir_615c1_setup(void)
+{
+	const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+	u8 mac[6];
+	u8 *wlan_mac = NULL;
+
+	if (nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
+			         "lan_mac=", mac) == 0) {
+		ar71xx_set_mac_base(mac);
+		wlan_mac = mac;
+	}
+
+	ar71xx_add_device_mdio(DIR_615C1_MDIO_MASK);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_m25p80(&dir_615c1_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
+					dir_615c1_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, DIR_615C1_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(dir_615c1_gpio_buttons),
+					dir_615c1_gpio_buttons);
+
+	ar913x_add_device_wmac(eeprom, wlan_mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1",
+	     dir_615c1_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-dir-825-b1.c linux-2.6.35.7/arch/mips/ar71xx/mach-dir-825-b1.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-dir-825-b1.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-dir-825-b1.c	2010-10-14 20:27:57.478101111 +0200
@@ -0,0 +1,192 @@
+/*
+ *  D-Link DIR-825 rev. B1 board support
+ *
+ *  Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o.
+ *
+ *  based on mach-wndr3700.c
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <linux/rtl8366s.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap94-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define DIR825B1_GPIO_LED_BLUE_USB		0
+#define DIR825B1_GPIO_LED_ORANGE_POWER		1
+#define DIR825B1_GPIO_LED_BLUE_POWER		2
+#define DIR825B1_GPIO_LED_BLUE_POWERSAVE	4
+#define DIR825B1_GPIO_LED_ORANGE_PLANET		6
+#define DIR825B1_GPIO_LED_BLUE_PLANET		11
+
+#define DIR825B1_GPIO_BTN_RESET			3
+#define DIR825B1_GPIO_BTN_POWERSAVE		8
+
+#define DIR825B1_GPIO_RTL8366_SDA		5
+#define DIR825B1_GPIO_RTL8366_SCK		7
+
+#define DIR825B1_BUTTONS_POLL_INTERVAL		20
+
+#define DIR825B1_CAL_LOCATION_0			0x1f661000
+#define DIR825B1_CAL_LOCATION_1			0x1f665000
+
+#define DIR825B1_MAC_LOCATION_0			0x2ffa81b8
+#define DIR825B1_MAC_LOCATION_1			0x2ffa8370
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition dir825b1_partitions[] = {
+	{
+		.name		= "uboot",
+		.offset		= 0,
+		.size		= 0x040000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "config",
+		.offset		= 0x040000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x050000,
+		.size		= 0x610000,
+	} , {
+		.name		= "caldata",
+		.offset		= 0x660000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "unknown",
+		.offset		= 0x670000,
+		.size		= 0x190000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data dir825b1_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = dir825b1_partitions,
+        .nr_parts       = ARRAY_SIZE(dir825b1_partitions),
+#endif
+};
+
+static struct gpio_led dir825b1_leds_gpio[] __initdata = {
+	{
+		.name		= "dir825b1:blue:usb",
+		.gpio		= DIR825B1_GPIO_LED_BLUE_USB,
+		.active_low	= 1,
+	}, {
+		.name		= "dir825b1:orange:power",
+		.gpio		= DIR825B1_GPIO_LED_ORANGE_POWER,
+		.active_low	= 1,
+	}, {
+		.name		= "dir825b1:blue:power",
+		.gpio		= DIR825B1_GPIO_LED_BLUE_POWER,
+		.active_low	= 1,
+	}, {
+		.name		= "dir825b1:blue:powersave",
+		.gpio		= DIR825B1_GPIO_LED_BLUE_POWERSAVE,
+		.active_low	= 1,
+	}, {
+		.name		= "dir825b1:orange:planet",
+		.gpio		= DIR825B1_GPIO_LED_ORANGE_PLANET,
+		.active_low	= 1,
+	}, {
+		.name		= "dir825b1:blue:planet",
+		.gpio		= DIR825B1_GPIO_LED_BLUE_PLANET,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button dir825b1_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= DIR825B1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	} , {
+		.desc		= "powersave",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.threshold	= 3,
+		.gpio		= DIR825B1_GPIO_BTN_POWERSAVE,
+		.active_low	= 1,
+	}
+};
+
+static struct rtl8366s_platform_data dir825b1_rtl8366s_data = {
+	.gpio_sda        = DIR825B1_GPIO_RTL8366_SDA,
+	.gpio_sck        = DIR825B1_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device dir825b1_rtl8366s_device = {
+	.name		= RTL8366S_DRIVER_NAME,
+	.id		= -1,
+	.dev = {
+		.platform_data	= &dir825b1_rtl8366s_data,
+	}
+};
+
+static void __init dir825b1_setup(void)
+{
+        u8 mac[6], i;
+
+	memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
+	for(i = 5; i >= 3; i--)
+		if(++mac[i] != 0x00) break;
+
+	ar71xx_set_mac_base(mac);
+
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.speed = SPEED_1000;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
+
+	ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth1_data.phy_mask = 0x10;
+	ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_m25p80(&dir825b1_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
+					dir825b1_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(dir825b1_gpio_buttons),
+					dir825b1_gpio_buttons);
+
+	ar71xx_add_device_usb();
+
+	platform_device_register(&dir825b1_rtl8366s_device);
+
+	ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
+		      (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_0),
+		      (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
+		      (u8 *) KSEG1ADDR(DIR825B1_MAC_LOCATION_1));
+}
+
+MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
+	     dir825b1_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-mzk-w04nu.c linux-2.6.35.7/arch/mips/ar71xx/mach-mzk-w04nu.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-mzk-w04nu.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-mzk-w04nu.c	2010-10-14 20:27:57.518101300 +0200
@@ -0,0 +1,165 @@
+/*
+ *  Planex MZK-W04NU board support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+
+#define MZK_W04NU_GPIO_LED_USB		0
+#define MZK_W04NU_GPIO_LED_STATUS	1
+#define MZK_W04NU_GPIO_LED_WPS		3
+#define MZK_W04NU_GPIO_LED_WLAN		6
+#define MZK_W04NU_GPIO_LED_AP		15
+#define MZK_W04NU_GPIO_LED_ROUTER	16
+
+#define MZK_W04NU_GPIO_BTN_APROUTER	5
+#define MZK_W04NU_GPIO_BTN_WPS		12
+#define MZK_W04NU_GPIO_BTN_RESET	21
+
+#define MZK_W04NU_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition mzk_w04nu_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x040000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "u-boot-env",
+		.offset		= 0x040000,
+		.size		= 0x010000,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x050000,
+		.size		= 0x160000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x1b0000,
+		.size		= 0x630000,
+	} , {
+		.name		= "art",
+		.offset		= 0x7e0000,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x050000,
+		.size		= 0x790000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data mzk_w04nu_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = mzk_w04nu_partitions,
+        .nr_parts       = ARRAY_SIZE(mzk_w04nu_partitions),
+#endif
+};
+
+static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = {
+	{
+		.name		= "mzk-w04nu:green:status",
+		.gpio		= MZK_W04NU_GPIO_LED_STATUS,
+		.active_low	= 1,
+	}, {
+		.name		= "mzk-w04nu:blue:wps",
+		.gpio		= MZK_W04NU_GPIO_LED_WPS,
+		.active_low	= 1,
+	}, {
+		.name		= "mzk-w04nu:green:wlan",
+		.gpio		= MZK_W04NU_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}, {
+		.name		= "mzk-w04nu:green:usb",
+		.gpio		= MZK_W04NU_GPIO_LED_USB,
+		.active_low	= 1,
+	}, {
+		.name		= "mzk-w04nu:green:ap",
+		.gpio		= MZK_W04NU_GPIO_LED_AP,
+		.active_low	= 1,
+	}, {
+		.name		= "mzk-w04nu:green:router",
+		.gpio		= MZK_W04NU_GPIO_LED_ROUTER,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button mzk_w04nu_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= MZK_W04NU_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= MZK_W04NU_GPIO_BTN_WPS,
+		.active_low	= 1,
+	}, {
+		.desc		= "aprouter",
+		.type		= EV_KEY,
+		.code		= BTN_2,
+		.threshold	= 3,
+		.gpio		= MZK_W04NU_GPIO_BTN_APROUTER,
+		.active_low	= 0,
+	}
+};
+
+#define MZK_W04NU_WAN_PHYMASK	BIT(4)
+#define MZK_W04NU_MDIO_MASK	(~MZK_W04NU_WAN_PHYMASK)
+
+static void __init mzk_w04nu_setup(void)
+{
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(eeprom);
+
+	ar71xx_add_device_mdio(MZK_W04NU_MDIO_MASK);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_data.has_ar8216 = 1;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_m25p80(&mzk_w04nu_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
+					mzk_w04nu_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(mzk_w04nu_gpio_buttons),
+					mzk_w04nu_gpio_buttons);
+	ar71xx_add_device_usb();
+
+	ar913x_add_device_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(AR71XX_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU",
+	     mzk_w04nu_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-mzk-w300nh.c linux-2.6.35.7/arch/mips/ar71xx/mach-mzk-w300nh.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-mzk-w300nh.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-mzk-w300nh.c	2010-10-14 20:27:57.565601159 +0200
@@ -0,0 +1,158 @@
+/*
+ *  Planex MZK-W300NH board support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define MZK_W300NH_GPIO_LED_STATUS	1
+#define MZK_W300NH_GPIO_LED_WPS		3
+#define MZK_W300NH_GPIO_LED_WLAN	6
+#define MZK_W300NH_GPIO_LED_AP		15
+#define MZK_W300NH_GPIO_LED_ROUTER	16
+
+#define MZK_W300NH_GPIO_BTN_APROUTER	5
+#define MZK_W300NH_GPIO_BTN_WPS		12
+#define MZK_W300NH_GPIO_BTN_RESET	21
+
+#define MZK_W04NU_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition mzk_w300nh_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x040000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "u-boot-env",
+		.offset		= 0x040000,
+		.size		= 0x010000,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x050000,
+		.size		= 0x160000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x1b0000,
+		.size		= 0x630000,
+	} , {
+		.name		= "art",
+		.offset		= 0x7e0000,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x050000,
+		.size		= 0x790000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data mzk_w300nh_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = mzk_w300nh_partitions,
+        .nr_parts       = ARRAY_SIZE(mzk_w300nh_partitions),
+#endif
+};
+
+static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
+	{
+		.name		= "mzk-w300nh:green:status",
+		.gpio		= MZK_W300NH_GPIO_LED_STATUS,
+		.active_low	= 1,
+	}, {
+		.name		= "mzk-w300nh:blue:wps",
+		.gpio		= MZK_W300NH_GPIO_LED_WPS,
+		.active_low	= 1,
+	}, {
+		.name		= "mzk-w300nh:green:wlan",
+		.gpio		= MZK_W300NH_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}, {
+		.name		= "mzk-w300nh:green:ap",
+		.gpio		= MZK_W300NH_GPIO_LED_AP,
+		.active_low	= 1,
+	}, {
+		.name		= "mzk-w300nh:green:router",
+		.gpio		= MZK_W300NH_GPIO_LED_ROUTER,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button mzk_w300nh_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= MZK_W300NH_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= MZK_W300NH_GPIO_BTN_WPS,
+		.active_low	= 1,
+	}, {
+		.desc		= "aprouter",
+		.type		= EV_KEY,
+		.code		= BTN_2,
+		.threshold	= 3,
+		.gpio		= MZK_W300NH_GPIO_BTN_APROUTER,
+		.active_low	= 0,
+	}
+};
+
+#define MZK_W300NH_WAN_PHYMASK	BIT(4)
+#define MZK_W300NH_MDIO_MASK	(~MZK_W300NH_WAN_PHYMASK)
+
+static void __init mzk_w300nh_setup(void)
+{
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(eeprom);
+
+	ar71xx_add_device_mdio(MZK_W300NH_MDIO_MASK);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_data.has_ar8216 = 1;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_m25p80(&mzk_w300nh_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
+				    mzk_w300nh_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
+				       ARRAY_SIZE(mzk_w300nh_gpio_buttons),
+				       mzk_w300nh_gpio_buttons);
+	ar913x_add_device_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",
+	     mzk_w300nh_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-nbg460n.c linux-2.6.35.7/arch/mips/ar71xx/mach-nbg460n.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-nbg460n.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-nbg460n.c	2010-10-14 20:27:57.617104398 +0200
@@ -0,0 +1,222 @@
+/*
+ *  Zyxel NBG 460N/550N/550NH board support
+ *
+ *  Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com>
+ *
+ *  based on mach-tl-wr1043nd.c
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <linux/rtl8366s.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+/* LEDs */
+#define NBG460N_GPIO_LED_WPS		3
+#define NBG460N_GPIO_LED_WAN		6
+#define NBG460N_GPIO_LED_POWER		14
+#define NBG460N_GPIO_LED_WLAN		15
+
+/* Buttons */
+#define NBG460N_GPIO_BTN_WPS		12
+#define NBG460N_GPIO_BTN_RESET		21
+#define NBG460N_BUTTONS_POLL_INTERVAL	20
+
+/* RTC chip PCF8563 I2C interface */
+#define NBG460N_GPIO_PCF8563_SDA	8
+#define NBG460N_GPIO_PCF8563_SCK	7
+
+/* Switch configuration I2C interface */
+#define NBG460N_GPIO_RTL8366_SDA	16
+#define NBG460N_GPIO_RTL8366_SCK	18
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition nbg460n_partitions[] = {
+	{
+		.name		= "Bootbase",
+		.offset		= 0,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "U-Boot Config",
+		.offset		= 0x010000,
+		.size		= 0x030000,
+	} , {
+		.name		= "U-Boot",
+		.offset		= 0x040000,
+		.size		= 0x030000,
+	} , {
+		.name		= "linux",
+		.offset		= 0x070000,
+		.size		= 0x0e0000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x150000,
+		.size		= 0x2a0000,
+	} , {
+		.name		= "CalibData",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x070000,
+		.size		= 0x380000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data nbg460n_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = nbg460n_partitions,
+        .nr_parts       = ARRAY_SIZE(nbg460n_partitions),
+#endif
+};
+
+static struct gpio_led nbg460n_leds_gpio[] __initdata = {
+	{
+		.name		= "nbg460n:green:power",
+		.gpio		= NBG460N_GPIO_LED_POWER,
+		.active_low	= 0,
+		.default_trigger = "default-on",
+	}, {
+		.name		= "nbg460n:green:wps",
+		.gpio		= NBG460N_GPIO_LED_WPS,
+		.active_low	= 0,
+	}, {
+		.name		= "nbg460n:green:wlan",
+		.gpio		= NBG460N_GPIO_LED_WLAN,
+		.active_low	= 0,
+	}, {
+		/* Not really for controlling the LED,
+		   when set low the LED blinks uncontrollable  */
+		.name		= "nbg460n:green:wan",
+		.gpio		= NBG460N_GPIO_LED_WAN,
+		.active_low	= 0,
+	}
+};
+
+static struct gpio_button nbg460n_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= NBG460N_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= NBG460N_GPIO_BTN_WPS,
+		.active_low	= 1,
+	}
+};
+
+static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = {
+	.sda_pin	= NBG460N_GPIO_PCF8563_SDA,
+	.scl_pin	= NBG460N_GPIO_PCF8563_SCK,
+	.udelay		= 10,
+};
+
+static struct platform_device nbg460n_i2c_device = {
+	.name		= "i2c-gpio",
+	.id		= -1,
+	.num_resources	= 0,
+	.resource	= NULL,
+	.dev		= {
+		.platform_data	= &nbg460n_i2c_device_platdata,
+	},
+};
+
+static struct i2c_board_info nbg460n_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static void __devinit nbg460n_i2c_init(void)
+{
+	/* The gpio interface */
+	platform_device_register(&nbg460n_i2c_device);
+	/* I2C devices */
+	i2c_register_board_info(0, nbg460n_i2c_devs,
+				ARRAY_SIZE(nbg460n_i2c_devs));
+}
+
+
+static struct rtl8366s_platform_data nbg460n_rtl8366s_data = {
+	.gpio_sda        = NBG460N_GPIO_RTL8366_SDA,
+	.gpio_sck        = NBG460N_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device nbg460n_rtl8366s_device = {
+	.name		= RTL8366S_DRIVER_NAME,
+	.id		= -1,
+	.dev = {
+		.platform_data	= &nbg460n_rtl8366s_data,
+	}
+};
+
+static void __init nbg460n_setup(void)
+{
+	/* end of bootloader sector contains mac address*/
+	u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8);
+	/* last sector contains wlan calib data */
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(mac);
+
+	/* LAN Port */
+	ar71xx_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.speed = SPEED_1000;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	/* WAN Port */
+	ar71xx_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth1_data.phy_mask = 0x10;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	/* register the switch phy */
+	platform_device_register(&nbg460n_rtl8366s_device);
+
+	/* register flash */
+	ar71xx_add_device_m25p80(&nbg460n_flash_data);
+
+	ar913x_add_device_wmac(eeprom, mac);
+
+	/* register RTC chip */
+	nbg460n_i2c_init();
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio),
+					nbg460n_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, NBG460N_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(nbg460n_gpio_buttons),
+					nbg460n_gpio_buttons);
+}
+
+MIPS_MACHINE(AR71XX_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH", nbg460n_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-pb42.c linux-2.6.35.7/arch/mips/ar71xx/mach-pb42.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-pb42.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-pb42.c	2010-10-14 20:27:57.665601166 +0200
@@ -0,0 +1,71 @@
+/*
+ *  Atheros PB42 board support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-usb.h"
+
+#define PB42_BUTTONS_POLL_INTERVAL	20
+
+#define PB42_GPIO_BTN_SW4	8
+#define PB42_GPIO_BTN_SW5	3
+
+static struct gpio_button pb42_gpio_buttons[] __initdata = {
+	{
+		.desc		= "sw4",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.threshold	= 3,
+		.gpio		= PB42_GPIO_BTN_SW4,
+		.active_low	= 1,
+	} , {
+		.desc		= "sw5",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.threshold	= 3,
+		.gpio		= PB42_GPIO_BTN_SW5,
+		.active_low	= 1,
+	}
+};
+
+#define PB42_WAN_PHYMASK	BIT(20)
+#define PB42_LAN_PHYMASK	(BIT(16) | BIT(17) | BIT(18) | BIT(19))
+#define PB42_MDIO_PHYMASK	(PB42_LAN_PHYMASK | PB42_WAN_PHYMASK)
+
+static void __init pb42_init(void)
+{
+	ar71xx_add_device_m25p80(NULL);
+
+	ar71xx_add_device_mdio(~PB42_MDIO_PHYMASK);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ar71xx_eth0_data.phy_mask = PB42_WAN_PHYMASK;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.speed = SPEED_100;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_gpio_buttons(-1, PB42_BUTTONS_POLL_INTERVAL,
+				       ARRAY_SIZE(pb42_gpio_buttons),
+				       pb42_gpio_buttons);
+
+	pb42_pci_init();
+}
+
+MIPS_MACHINE(AR71XX_MACH_PB42, "PB42", "Atheros PB42", pb42_init);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-pb44.c linux-2.6.35.7/arch/mips/ar71xx/mach-pb44.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-pb44.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-pb44.c	2010-10-14 20:27:57.725015448 +0200
@@ -0,0 +1,207 @@
+/*
+ *  Atheros PB44 board support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/vsc7385.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pcf857x.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define PB44_PCF8757_VSC7395_CS	0
+#define PB44_PCF8757_STEREO_CS	1
+#define PB44_PCF8757_SLIC_CS0	2
+#define PB44_PCF8757_SLIC_TEST	3
+#define PB44_PCF8757_SLIC_INT0	4
+#define PB44_PCF8757_SLIC_INT1	5
+#define PB44_PCF8757_SW_RESET	6
+#define PB44_PCF8757_SW_JUMP	8
+#define PB44_PCF8757_LED_JUMP1	9
+#define PB44_PCF8757_LED_JUMP2	10
+#define PB44_PCF8757_TP24	11
+#define PB44_PCF8757_TP25	12
+#define PB44_PCF8757_TP26	13
+#define PB44_PCF8757_TP27	14
+#define PB44_PCF8757_TP28	15
+
+#define PB44_GPIO_I2C_SCL	0
+#define PB44_GPIO_I2C_SDA	1
+
+#define PB44_GPIO_EXP_BASE	16
+#define PB44_GPIO_VSC7395_CS	(PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
+#define PB44_GPIO_SW_RESET	(PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_RESET)
+#define PB44_GPIO_SW_JUMP	(PB44_GPIO_EXP_BASE + PB44_PCF8757_SW_JUMP)
+#define PB44_GPIO_LED_JUMP1	(PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP1)
+#define PB44_GPIO_LED_JUMP2	(PB44_GPIO_EXP_BASE + PB44_PCF8757_LED_JUMP2)
+
+static struct i2c_gpio_platform_data pb44_i2c_gpio_data = {
+	.sda_pin        = PB44_GPIO_I2C_SDA,
+	.scl_pin        = PB44_GPIO_I2C_SCL,
+};
+
+static struct platform_device pb44_i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &pb44_i2c_gpio_data,
+	}
+};
+
+static struct pcf857x_platform_data pb44_pcf857x_data = {
+	.gpio_base	= PB44_GPIO_EXP_BASE,
+};
+
+static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("pcf8575", 0x20),
+		.platform_data  = &pb44_pcf857x_data,
+	},
+};
+
+static struct gpio_led pb44_leds_gpio[] __initdata = {
+	{
+		.name		= "pb44:amber:jump1",
+		.gpio		= PB44_GPIO_LED_JUMP1,
+		.active_low	= 1,
+	}, {
+		.name		= "pb44:green:jump2",
+		.gpio		= PB44_GPIO_LED_JUMP2,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_button pb44_gpio_buttons[] __initdata = {
+	{
+		.desc		= "soft_reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= PB44_GPIO_SW_RESET,
+		.active_low	= 1,
+	} , {
+		.desc		= "jumpstart",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= PB44_GPIO_SW_JUMP,
+		.active_low	= 1,
+	}
+};
+
+static void pb44_vsc7395_reset(void)
+{
+	ar71xx_device_stop(RESET_MODULE_GE1_PHY);
+	udelay(10);
+	ar71xx_device_start(RESET_MODULE_GE1_PHY);
+	mdelay(50);
+}
+
+static struct vsc7385_platform_data pb44_vsc7395_data = {
+	.reset		= pb44_vsc7395_reset,
+	.ucode_name	= "vsc7395_ucode_pb44.bin",
+	.mac_cfg = {
+		.tx_ipg		= 6,
+		.bit2		= 1,
+		.clk_sel	= 0,
+	},
+};
+
+static struct spi_board_info pb44_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "m25p80",
+	}, {
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.max_speed_hz	= 25000000,
+		.modalias	= "spi-vsc7385",
+		.platform_data	= &pb44_vsc7395_data,
+		.controller_data = (void *) PB44_GPIO_VSC7395_CS,
+	},
+};
+
+static struct resource pb44_spi_resources[] = {
+	[0] = {
+		.start	= AR71XX_SPI_BASE,
+		.end	= AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct ar71xx_spi_platform_data pb44_spi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 2,
+};
+
+static struct platform_device pb44_spi_device = {
+	.name		= "pb44-spi",
+	.id		= -1,
+	.resource	= pb44_spi_resources,
+	.num_resources	= ARRAY_SIZE(pb44_spi_resources),
+	.dev = {
+		.platform_data = &pb44_spi_data,
+	},
+};
+
+#define PB44_WAN_PHYMASK	BIT(0)
+#define PB44_LAN_PHYMASK	0
+#define PB44_MDIO_PHYMASK	(PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
+
+static void __init pb44_init(void)
+{
+	ar71xx_add_device_mdio(~PB44_MDIO_PHYMASK);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.phy_mask = PB44_WAN_PHYMASK;
+
+	ar71xx_add_device_eth(0);
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth1_data.speed = SPEED_1000;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+	ar71xx_eth1_pll_data.pll_1000 = 0x110000;
+
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_usb();
+
+	pb42_pci_init();
+
+	i2c_register_board_info(0, pb44_i2c_board_info,
+ 				ARRAY_SIZE(pb44_i2c_board_info));
+
+	platform_device_register(&pb44_i2c_gpio_device);
+
+	spi_register_board_info(pb44_spi_info, ARRAY_SIZE(pb44_spi_info));
+	platform_device_register(&pb44_spi_device);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
+				    pb44_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(pb44_gpio_buttons),
+				       pb44_gpio_buttons);
+}
+
+MIPS_MACHINE(AR71XX_MACH_PB44, "PB44", "Atheros PB44", pb44_init);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-pb92.c linux-2.6.35.7/arch/mips/ar71xx/mach-pb92.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-pb92.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-pb92.c	2010-10-14 20:27:57.774807434 +0200
@@ -0,0 +1,109 @@
+/*
+ *  Atheros PB92 board support
+ *
+ *  Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb9x-pci.h"
+#include "dev-usb.h"
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition pb92_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x040000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "u-boot-env",
+		.offset		= 0x040000,
+		.size		= 0x010000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x050000,
+		.size		= 0x2b0000,
+	} , {
+		.name		= "uImage",
+		.offset		= 0x300000,
+		.size		= 0x0e0000,
+	} , {
+		.name		= "ART",
+		.offset		= 0x3e0000,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data pb92_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = pb92_partitions,
+        .nr_parts       = ARRAY_SIZE(pb92_partitions),
+#endif
+};
+
+
+#define PB92_BUTTONS_POLL_INTERVAL	20
+
+#define PB92_GPIO_BTN_SW4	8
+#define PB92_GPIO_BTN_SW5	3
+
+static struct gpio_button pb92_gpio_buttons[] __initdata = {
+	{
+		.desc		= "sw4",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.threshold	= 3,
+		.gpio		= PB92_GPIO_BTN_SW4,
+		.active_low	= 1,
+	} , {
+		.desc		= "sw5",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.threshold	= 3,
+		.gpio		= PB92_GPIO_BTN_SW5,
+		.active_low	= 1,
+	}
+};
+
+static void __init pb92_init(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ar71xx_set_mac_base(mac);
+	ar71xx_add_device_m25p80(&pb92_flash_data);
+
+	ar71xx_add_device_mdio(~0);
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_1000;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.speed = SPEED_1000;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_gpio_buttons(-1, PB92_BUTTONS_POLL_INTERVAL,
+				       ARRAY_SIZE(pb92_gpio_buttons),
+				       pb92_gpio_buttons);
+
+	pb9x_pci_init();
+}
+
+MIPS_MACHINE(AR71XX_MACH_PB92, "PB92", "Atheros PB92", pb92_init);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-rb4xx.c linux-2.6.35.7/arch/mips/ar71xx/mach-rb4xx.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-rb4xx.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-rb4xx.c	2010-10-14 20:27:57.824611115 +0200
@@ -0,0 +1,290 @@
+/*
+ *  MikroTik RouterBOARD 4xx series support
+ *
+ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define RB4XX_GPIO_USER_LED	4
+#define RB4XX_GPIO_RESET_SWITCH	7
+
+#define RB4XX_BUTTONS_POLL_INTERVAL	20
+
+static struct gpio_led rb4xx_leds_gpio[] __initdata = {
+	{
+		.name		= "rb4xx:yellow:user",
+		.gpio		= RB4XX_GPIO_USER_LED,
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_button rb4xx_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset_switch",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= RB4XX_GPIO_RESET_SWITCH,
+		.active_low	= 1,
+	}
+};
+
+static struct platform_device rb4xx_nand_device = {
+	.name	= "rb4xx-nand",
+	.id	= -1,
+};
+
+static struct ar71xx_pci_irq rb4xx_pci_irqs[] __initdata = {
+	{
+		.slot	= 0,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV2,
+	}, {
+		.slot	= 1,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV0,
+	}, {
+		.slot	= 1,
+		.pin	= 2,
+		.irq	= AR71XX_PCI_IRQ_DEV1,
+	}, {
+		.slot	= 2,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV1,
+	}, {
+		.slot	= 3,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV2,
+	}
+};
+
+#if 0
+/*
+ * SPI device support is experimental
+ */
+static struct flash_platform_data rb4xx_flash_data = {
+	.type	= "pm25lv512",
+};
+
+static struct spi_board_info rb4xx_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "m25p80",
+		.platform_data	= &rb4xx_flash_data,
+	}
+};
+
+static struct mmc_spi_platform_data rb433_mmc_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct spi_board_info rb433_spi_info[] = {
+	{
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 25000000,
+		.modalias	= "m25p80",
+		.platform_data	= &rb433_flash_data,
+	}, {
+		.bus_num	= 0,
+		.chip_select	= 2,
+		.max_speed_hz	= 25000000,
+		.modalias	= "mmc_spi",
+		.platform_data	= &rb433_mmc_data,
+	}
+};
+
+static u32 rb433_spi_get_ioc_base(u8 chip_select, int cs_high, int is_on)
+{
+	u32 ret;
+
+	if (is_on == AR71XX_SPI_CS_INACTIVE) {
+		ret = SPI_IOC_CS0 | SPI_IOC_CS1;
+	} else {
+		if (cs_high) {
+			ret = SPI_IOC_CS0 | SPI_IOC_CS1;
+		} else {
+			if ((chip_select ^ 2) == 0)
+				ret = SPI_IOC_CS1 ^ (SPI_IOC_CS0 | SPI_IOC_CS1);
+			else
+				ret = SPI_IOC_CS0 ^ (SPI_IOC_CS0 | SPI_IOC_CS1);
+		}
+	}
+
+	return ret;
+}
+
+struct ar71xx_spi_platform_data rb433_spi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 3,
+	.get_ioc_base		= rb433_spi_get_ioc_base,
+};
+
+static void rb4xx_add_device_spi(void)
+{
+	ar71xx_add_device_spi(NULL, rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+}
+
+static void rb433_add_device_spi(void)
+{
+	ar71xx_add_device_spi(&rb433_spi_data, rb433_spi_info,
+				ARRAY_SIZE(rb433_spi_info));
+}
+#else
+static inline void rb4xx_add_device_spi(void) {}
+static inline void rb433_add_device_spi(void) {}
+#endif
+
+static void __init rb4xx_generic_setup(void)
+{
+	ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+				    AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
+					rb4xx_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(rb4xx_gpio_buttons),
+					rb4xx_gpio_buttons);
+
+	platform_device_register(&rb4xx_nand_device);
+}
+
+static void __init rb411_setup(void)
+{
+	rb4xx_generic_setup();
+	rb4xx_add_device_spi();
+
+	ar71xx_add_device_mdio(0xfffffffc);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ar71xx_eth0_data.phy_mask = 0x00000003;
+
+	ar71xx_add_device_eth(0);
+
+	ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
+	     rb411_setup);
+
+static void __init rb411u_setup(void)
+{
+	rb411_setup();
+	ar71xx_add_device_usb();
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
+	     rb411u_setup);
+
+static void __init rb433_setup(void)
+{
+	rb4xx_generic_setup();
+	rb433_add_device_spi();
+
+	ar71xx_add_device_mdio(0xffffffe9);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = 0x00000010;
+
+	ar71xx_add_device_eth(1);
+	ar71xx_add_device_eth(0);
+
+	ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
+	     rb433_setup);
+
+static void __init rb433u_setup(void)
+{
+	rb433_setup();
+	ar71xx_add_device_usb();
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
+	     rb433u_setup);
+
+static void __init rb450_generic_setup(int gige)
+{
+	rb4xx_generic_setup();
+	rb4xx_add_device_spi();
+
+	ar71xx_add_device_mdio(0xffffffe0);
+
+	ar71xx_eth0_data.phy_if_mode = (gige) ? PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
+	ar71xx_eth0_data.phy_mask = (gige) ? (1 << 0) : 0;
+	ar71xx_eth0_data.speed = (gige) ? SPEED_1000 : SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_data.phy_if_mode = (gige) ? PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = 0x00000010;
+
+	ar71xx_add_device_eth(1);
+	ar71xx_add_device_eth(0);
+}
+
+static void __init rb450_setup(void)
+{
+	rb450_generic_setup(0);
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
+	     rb450_setup);
+
+static void __init rb450g_setup(void)
+{
+	rb450_generic_setup(1);
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
+	     rb450g_setup);
+
+static void __init rb493_setup(void)
+{
+	rb4xx_generic_setup();
+	rb4xx_add_device_spi();
+
+	ar71xx_add_device_mdio(0x3fffff00);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = 0x00000001;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
+	     rb493_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-rb750.c linux-2.6.35.7/arch/mips/ar71xx/mach-rb750.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-rb750.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-rb750.c	2010-10-14 20:27:57.874416755 +0200
@@ -0,0 +1,133 @@
+/*
+ *  MikroTik RouterBOARD 750 support
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/mach-rb750.h>
+
+#include "machtype.h"
+#include "dev-ap91-eth.h"
+
+static struct rb750_led_data rb750_leds[] = {
+	{
+		.name		= "rb750:green:act",
+		.mask		= RB750_LED_ACT,
+		.active_low	= 1,
+	}, {
+		.name		= "rb750:green:port1",
+		.mask		= RB750_LED_PORT5,
+		.active_low	= 1,
+	}, {
+		.name		= "rb750:green:port2",
+		.mask		= RB750_LED_PORT4,
+		.active_low	= 1,
+	}, {
+		.name		= "rb750:green:port3",
+		.mask		= RB750_LED_PORT3,
+		.active_low	= 1,
+	}, {
+		.name		= "rb750:green:port4",
+		.mask		= RB750_LED_PORT2,
+		.active_low	= 1,
+	}, {
+		.name		= "rb750:green:port5",
+		.mask		= RB750_LED_PORT1,
+		.active_low	= 1,
+	}
+};
+
+static struct rb750_led_platform_data rb750_leds_data = {
+	.num_leds	= ARRAY_SIZE(rb750_leds),
+	.leds		= rb750_leds,
+};
+
+static struct platform_device rb750_leds_device = {
+	.name	= "leds-rb750",
+	.dev	= {
+		.platform_data = &rb750_leds_data,
+	}
+};
+
+static const char *rb750_port_names[AP91_ETH_NUM_PORT_NAMES] __initdata = {
+	"port5",
+	"port4",
+	"port3",
+	"port2",
+};
+
+static struct platform_device rb750_nand_device = {
+	.name	= "rb750-nand",
+	.id	= -1,
+};
+
+int rb750_latch_change(u32 mask_clr, u32 mask_set)
+{
+	static DEFINE_SPINLOCK(lock);
+	static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
+	static u32 latch_oe;
+	static u32 latch_clr;
+	unsigned long flags;
+	u32 t;
+	int ret = 0;
+
+	spin_lock_irqsave(&lock, flags);
+
+	if ((mask_clr & BIT(31)) != 0 &&
+	    (latch_set & RB750_LVC573_LE) == 0) {
+		goto unlock;
+	}
+
+	latch_set = (latch_set | mask_set) & ~mask_clr;
+	latch_clr = (latch_clr | mask_clr) & ~mask_set;
+
+	if (latch_oe == 0)
+		latch_oe = __raw_readl(ar71xx_gpio_base + GPIO_REG_OE);
+
+	if (likely(latch_set & RB750_LVC573_LE)) {
+		void __iomem *base = ar71xx_gpio_base;
+
+		t = __raw_readl(base + GPIO_REG_OE);
+		t |= mask_clr | latch_oe | mask_set;
+
+		__raw_writel(t, base + GPIO_REG_OE);
+		__raw_writel(latch_clr, base + GPIO_REG_CLEAR);
+		__raw_writel(latch_set, base + GPIO_REG_SET);
+	} else if (mask_clr & RB750_LVC573_LE) {
+		void __iomem *base = ar71xx_gpio_base;
+
+		latch_oe = __raw_readl(base + GPIO_REG_OE);
+		__raw_writel(RB750_LVC573_LE, base + GPIO_REG_CLEAR);
+		/* flush write */
+		__raw_readl(base + GPIO_REG_CLEAR);
+	}
+
+	ret = 1;
+
+ unlock:
+	spin_unlock_irqrestore(&lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rb750_latch_change);
+
+static void __init rb750_setup(void)
+{
+	ar71xx_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+				     AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+				     AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+				     AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+				     AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+	ap91_eth_init(NULL, rb750_port_names);
+	platform_device_register(&rb750_leds_device);
+	platform_device_register(&rb750_nand_device);
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
+	     rb750_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-tew-632brp.c linux-2.6.35.7/arch/mips/ar71xx/mach-tew-632brp.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-tew-632brp.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-tew-632brp.c	2010-10-14 20:27:57.916006386 +0200
@@ -0,0 +1,149 @@
+/*
+ *  TrendNET TEW-632BRP board support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "nvram.h"
+
+#define TEW_632BRP_GPIO_LED_STATUS	1
+#define TEW_632BRP_GPIO_LED_WPS		3
+#define TEW_632BRP_GPIO_LED_WLAN	6
+#define TEW_632BRP_GPIO_BTN_WPS		12
+#define TEW_632BRP_GPIO_BTN_RESET	21
+
+#define TEW_632BRP_BUTTONS_POLL_INTERVAL	20
+
+#define TEW_632BRP_CONFIG_ADDR	0x1f020000
+#define TEW_632BRP_CONFIG_SIZE	0x10000
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tew_632brp_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "config",
+		.offset		= 0x020000,
+		.size		= 0x010000,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x030000,
+		.size		= 0x0d0000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x100000,
+		.size		= 0x2f0000,
+	} , {
+		.name		= "art",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x030000,
+		.size		= 0x3c0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tew_632brp_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = tew_632brp_partitions,
+        .nr_parts       = ARRAY_SIZE(tew_632brp_partitions),
+#endif
+};
+
+static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
+	{
+		.name		= "tew-632brp:green:status",
+		.gpio		= TEW_632BRP_GPIO_LED_STATUS,
+		.active_low	= 1,
+	}, {
+		.name		= "tew-632brp:blue:wps",
+		.gpio		= TEW_632BRP_GPIO_LED_WPS,
+		.active_low	= 1,
+	}, {
+		.name		= "tew-632brp:green:wlan",
+		.gpio		= TEW_632BRP_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button tew_632brp_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= TEW_632BRP_GPIO_BTN_RESET,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= TEW_632BRP_GPIO_BTN_WPS,
+	}
+};
+
+#define TEW_632BRP_LAN_PHYMASK	BIT(0)
+#define TEW_632BRP_WAN_PHYMASK	BIT(4)
+#define TEW_632BRP_MDIO_MASK	(~(TEW_632BRP_LAN_PHYMASK | \
+				   TEW_632BRP_WAN_PHYMASK))
+
+static void __init tew_632brp_setup(void)
+{
+	const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR);
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+	u8 mac[6];
+	u8 *wlan_mac = NULL;
+
+	if (nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE,
+			         "lan_mac=", mac) == 0) {
+		ar71xx_set_mac_base(mac);
+		wlan_mac = mac;
+	}
+
+	ar71xx_add_device_mdio(TEW_632BRP_MDIO_MASK);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_m25p80(&tew_632brp_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
+					tew_632brp_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, TEW_632BRP_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(tew_632brp_gpio_buttons),
+					tew_632brp_gpio_buttons);
+
+	ar913x_add_device_wmac(eeprom, wlan_mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP",
+	     tew_632brp_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-tl-wr1043nd.c linux-2.6.35.7/arch/mips/ar71xx/mach-tl-wr1043nd.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-tl-wr1043nd.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-tl-wr1043nd.c	2010-10-14 20:27:57.964353043 +0200
@@ -0,0 +1,156 @@
+/*
+ *  TP-LINK TL-WR1043ND board support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/rtl8366rb.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define TL_WR1043ND_GPIO_LED_USB        1
+#define TL_WR1043ND_GPIO_LED_SYSTEM     2
+#define TL_WR1043ND_GPIO_LED_QSS        5
+#define TL_WR1043ND_GPIO_LED_WLAN       9
+
+#define TL_WR1043ND_GPIO_BTN_RESET      3
+#define TL_WR1043ND_GPIO_BTN_QSS        7
+
+#define TL_WR1043ND_GPIO_RTL8366_SDA	18
+#define TL_WR1043ND_GPIO_RTL8366_SCK	19
+
+#define TL_WR1043ND_BUTTONS_POLL_INTERVAL     20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wr1043nd_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x140000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x160000,
+		.size		= 0x690000,
+	} , {
+		.name		= "art",
+		.offset		= 0x7f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x020000,
+		.size		= 0x7d0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wr1043nd_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.parts		= tl_wr1043nd_partitions,
+	.nr_parts	= ARRAY_SIZE(tl_wr1043nd_partitions),
+#endif
+};
+
+static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
+	{
+		.name		= "tl-wr1043nd:green:usb",
+		.gpio		= TL_WR1043ND_GPIO_LED_USB,
+		.active_low	= 1,
+	}, {
+		.name		= "tl-wr1043nd:green:system",
+		.gpio		= TL_WR1043ND_GPIO_LED_SYSTEM,
+		.active_low	= 1,
+	}, {
+		.name		= "tl-wr1043nd:green:qss",
+		.gpio		= TL_WR1043ND_GPIO_LED_QSS,
+		.active_low	= 0,
+	}, {
+		.name		= "tl-wr1043nd:green:wlan",
+		.gpio		= TL_WR1043ND_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= TL_WR1043ND_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "qss",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= TL_WR1043ND_GPIO_BTN_QSS,
+		.active_low	= 1,
+	}
+};
+
+static struct rtl8366rb_platform_data tl_wr1043nd_rtl8366rb_data = {
+	.gpio_sda        = TL_WR1043ND_GPIO_RTL8366_SDA,
+	.gpio_sck        = TL_WR1043ND_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device tl_wr1043nd_rtl8366rb_device = {
+	.name		= RTL8366RB_DRIVER_NAME,
+	.id		= -1,
+	.dev = {
+		.platform_data	= &tl_wr1043nd_rtl8366rb_data,
+	}
+};
+
+static void __init tl_wr1043nd_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(mac);
+
+	ar71xx_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.speed = SPEED_1000;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_pll_data.pll_1000 = 0x1a000000;
+
+	ar71xx_add_device_eth(0);
+
+	ar71xx_add_device_usb();
+
+	ar71xx_add_device_m25p80(&tl_wr1043nd_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
+					tl_wr1043nd_leds_gpio);
+
+	platform_device_register(&tl_wr1043nd_rtl8366rb_device);
+
+	ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
+					tl_wr1043nd_gpio_buttons);
+
+	ar913x_add_device_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND",
+	     tl_wr1043nd_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-tl-wr741nd.c linux-2.6.35.7/arch/mips/ar71xx/mach-tl-wr741nd.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-tl-wr741nd.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-tl-wr741nd.c	2010-10-14 20:27:58.005601016 +0200
@@ -0,0 +1,115 @@
+/*
+ *  TP-LINK TL-WR741ND board support
+ *
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-eth.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define TL_WR741ND_GPIO_LED_QSS		0
+#define TL_WR741ND_GPIO_LED_SYSTEM	1
+
+#define TL_WR741ND_GPIO_BTN_RESET	11
+#define TL_WR741ND_GPIO_BTN_QSS		12
+
+#define TL_WR741ND_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wr741nd_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x140000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x160000,
+		.size		= 0x290000,
+	} , {
+		.name		= "art",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x020000,
+		.size		= 0x3d0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wr741nd_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = tl_wr741nd_partitions,
+        .nr_parts       = ARRAY_SIZE(tl_wr741nd_partitions),
+#endif
+};
+
+static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
+	{
+		.name		= "tl-wr741nd:green:system",
+		.gpio		= TL_WR741ND_GPIO_LED_SYSTEM,
+		.active_low	= 1,
+	}, {
+		.name		= "tl-wr741nd:green:qss",
+		.gpio		= TL_WR741ND_GPIO_LED_QSS,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button tl_wr741nd_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= TL_WR741ND_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "qss",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= TL_WR741ND_GPIO_BTN_QSS,
+		.active_low	= 1,
+	}
+};
+
+static void __init tl_wr741nd_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_add_device_m25p80(&tl_wr741nd_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
+					tl_wr741nd_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, TL_WR741ND_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(tl_wr741nd_gpio_buttons),
+					tl_wr741nd_gpio_buttons);
+
+	ap91_eth_init(mac, NULL);
+	ap91_pci_init(ee, mac);
+}
+MIPS_MACHINE(AR71XX_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
+	     tl_wr741nd_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-tl-wr841n.c linux-2.6.35.7/arch/mips/ar71xx/mach-tl-wr841n.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-tl-wr841n.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-tl-wr841n.c	2010-10-14 20:27:58.057141646 +0200
@@ -0,0 +1,143 @@
+/*
+ *  TP-LINK TL-WR841N board support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-dsa.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-leds-gpio.h"
+
+#define TL_WR841ND_V1_GPIO_LED_SYSTEM		2
+#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN	4
+#define TL_WR841ND_V1_GPIO_LED_QSS_RED		5
+
+#define TL_WR841ND_V1_GPIO_BTN_RESET	3
+#define TL_WR841ND_V1_GPIO_BTN_QSS	7
+
+#define TL_WR841ND_V1_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wr841n_v1_partitions[] = {
+	{
+		.name		= "redboot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x140000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x160000,
+		.size		= 0x280000,
+	} , {
+		.name		= "config",
+		.offset		= 0x3e0000,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x020000,
+		.size		= 0x3c0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wr841n_v1_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = tl_wr841n_v1_partitions,
+        .nr_parts       = ARRAY_SIZE(tl_wr841n_v1_partitions),
+#endif
+};
+
+static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
+	{
+		.name		= "tl-wr841n:green:system",
+		.gpio		= TL_WR841ND_V1_GPIO_LED_SYSTEM,
+		.active_low	= 1,
+	}, {
+		.name		= "tl-wr841n:red:qss",
+		.gpio		= TL_WR841ND_V1_GPIO_LED_QSS_RED,
+	}, {
+		.name		= "tl-wr841n:green:qss",
+		.gpio		= TL_WR841ND_V1_GPIO_LED_QSS_GREEN,
+	}
+};
+
+static struct gpio_button tl_wr841n_v1_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= TL_WR841ND_V1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "qss",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= TL_WR841ND_V1_GPIO_BTN_QSS,
+		.active_low	= 1,
+	}
+};
+
+static struct dsa_chip_data tl_wr841n_v1_dsa_chip = {
+	.port_names[0]  = "wan",
+	.port_names[1]  = "lan1",
+	.port_names[2]  = "lan2",
+	.port_names[3]  = "lan3",
+	.port_names[4]  = "lan4",
+	.port_names[5]  = "cpu",
+};
+
+static struct dsa_platform_data tl_wr841n_v1_dsa_data = {
+	.nr_chips	= 1,
+	.chip		= &tl_wr841n_v1_dsa_chip,
+};
+
+static void __init tl_wr841n_v1_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+	ar71xx_set_mac_base(mac);
+
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_add_device_eth(0);
+
+	ar71xx_add_device_dsa(0, &tl_wr841n_v1_dsa_data);
+
+	ar71xx_add_device_m25p80(&tl_wr841n_v1_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
+					tl_wr841n_v1_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, TL_WR841ND_V1_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(tl_wr841n_v1_gpio_buttons),
+					tl_wr841n_v1_gpio_buttons);
+
+	pb42_pci_init();
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1",
+	     tl_wr841n_v1_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-tl-wr941nd.c linux-2.6.35.7/arch/mips/ar71xx/mach-tl-wr941nd.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-tl-wr941nd.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-tl-wr941nd.c	2010-10-14 20:27:58.095601080 +0200
@@ -0,0 +1,142 @@
+/*
+ *  TP-LINK TL-WR941ND board support
+ *
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-dsa.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define TL_WR941ND_GPIO_LED_SYSTEM	2
+#define TL_WR941ND_GPIO_LED_QSS_RED	4
+#define TL_WR941ND_GPIO_LED_QSS_GREEN	5
+
+#define TL_WR941ND_GPIO_BTN_RESET	3
+#define TL_WR941ND_GPIO_BTN_QSS		7
+
+#define TL_WR941ND_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition tl_wr941nd_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x140000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x160000,
+		.size		= 0x290000,
+	} , {
+		.name		= "art",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x020000,
+		.size		= 0x3d0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data tl_wr941nd_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = tl_wr941nd_partitions,
+        .nr_parts       = ARRAY_SIZE(tl_wr941nd_partitions),
+#endif
+};
+
+static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
+	{
+		.name		= "tl-wr941nd:green:system",
+		.gpio		= TL_WR941ND_GPIO_LED_SYSTEM,
+		.active_low	= 1,
+	}, {
+		.name		= "tl-wr941nd:red:qss",
+		.gpio		= TL_WR941ND_GPIO_LED_QSS_RED,
+	}, {
+		.name		= "tl-wr941nd:green:qss",
+		.gpio		= TL_WR941ND_GPIO_LED_QSS_GREEN,
+	}
+};
+
+static struct gpio_button tl_wr941nd_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= TL_WR941ND_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "qss",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= TL_WR941ND_GPIO_BTN_QSS,
+		.active_low	= 1,
+	}
+};
+
+static struct dsa_chip_data tl_wr941nd_dsa_chip = {
+	.port_names[0]  = "wan",
+	.port_names[1]  = "lan1",
+	.port_names[2]  = "lan2",
+	.port_names[3]  = "lan3",
+	.port_names[4]  = "lan4",
+	.port_names[5]  = "cpu",
+};
+
+static struct dsa_platform_data tl_wr941nd_dsa_data = {
+	.nr_chips	= 1,
+	.chip		= &tl_wr941nd_dsa_chip,
+};
+
+static void __init tl_wr941nd_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(mac);
+
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data);
+
+	ar71xx_add_device_m25p80(&tl_wr941nd_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
+					tl_wr941nd_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(tl_wr941nd_gpio_buttons),
+					tl_wr941nd_gpio_buttons);
+	ar913x_add_device_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND",
+	     tl_wr941nd_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/machtype.h linux-2.6.35.7/arch/mips/ar71xx/machtype.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/machtype.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/machtype.h	2010-10-14 20:27:58.135601194 +0200
@@ -0,0 +1,60 @@
+/*
+ *  Atheros AR71xx machine type definitions
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_MACHTYPE_H
+#define _AR71XX_MACHTYPE_H
+
+#include <asm/mips_machine.h>
+
+enum ar71xx_mach_type {
+	AR71XX_MACH_GENERIC = 0,
+	AR71XX_MACH_AP81,	/* Atheros AP81 */
+	AR71XX_MACH_AP83,	/* Atheros AP83 */
+	AR71XX_MACH_AW_NR580,	/* AzureWave AW-NR580 */
+	AR71XX_MACH_DIR_600_A1,	/* D-Link DIR-600 rev. A1 */
+	AR71XX_MACH_DIR_615_C1,	/* D-Link DIR-615 rev. C1 */
+	AR71XX_MACH_DIR_825_B1,	/* D-Link DIR-825 rev. B1 */
+	AR71XX_MACH_RB_411,	/* MikroTik RouterBOARD 411/411A/411AH */
+	AR71XX_MACH_RB_411U,	/* MikroTik RouterBOARD 411U */
+	AR71XX_MACH_RB_433,	/* MikroTik RouterBOARD 433/433AH */
+	AR71XX_MACH_RB_433U,	/* MikroTik RouterBOARD 433UAH */
+	AR71XX_MACH_RB_450,	/* MikroTik RouterBOARD 450 */
+	AR71XX_MACH_RB_450G,	/* MikroTik RouterBOARD 450G */
+	AR71XX_MACH_RB_493,	/* Mikrotik RouterBOARD 493/493AH */
+	AR71XX_MACH_RB_750,	/* MikroTik RouterBOARD 750 */
+	AR71XX_MACH_PB42,	/* Atheros PB42 */
+	AR71XX_MACH_PB44,	/* Atheros PB44 */
+	AR71XX_MACH_PB92,	/* Atheros PB92 */
+	AR71XX_MACH_MZK_W04NU,	/* Planex MZK-W04NU */
+	AR71XX_MACH_MZK_W300NH,	/* Planex MZK-W300NH */
+	AR71XX_MACH_NBG460N,	/* Zyxel NBG460N/550N/550NH */
+	AR71XX_MACH_TEW_632BRP,	/* TRENDnet TEW-632BRP */
+	AR71XX_MACH_TL_WR741ND,	/* TP-LINK TL-WR741ND */
+	AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
+	AR71XX_MACH_TL_WR941ND,	/* TP-LINK TL-WR941ND */
+	AR71XX_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */
+	AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
+	AR71XX_MACH_UBNT_LSX,	/* Ubiquiti LSX */
+	AR71XX_MACH_UBNT_RS,	/* Ubiquiti RouterStation */
+	AR71XX_MACH_UBNT_AR71XX, /* Ubiquiti AR71xx-based board */
+	AR71XX_MACH_UBNT_RSPRO,	/* Ubiquiti RouterStation Pro */
+	AR71XX_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
+	AR71XX_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
+	AR71XX_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
+	AR71XX_MACH_WNDR3700,	/* NETGEAR WNDR3700 */
+	AR71XX_MACH_WNR2000,	/* NETGEAR WNR2000 */
+	AR71XX_MACH_WP543,	/* Compex WP543 */
+	AR71XX_MACH_WRT160NL,	/* Linksys WRT160NL */
+	AR71XX_MACH_WRT400N,	/* Linksys WRT400N */
+	AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
+};
+
+#endif /* _AR71XX_MACHTYPE_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-ubnt.c linux-2.6.35.7/arch/mips/ar71xx/mach-ubnt.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-ubnt.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-ubnt.c	2010-10-14 20:27:58.190029906 +0200
@@ -0,0 +1,281 @@
+/*
+ *  Ubiquiti RouterStation support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *  Copyright (C) 2008 Ubiquiti <support@ubnt.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap91-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define UBNT_RS_GPIO_LED_RF	2
+#define UBNT_RS_GPIO_SW4	8
+
+#define UBNT_LS_SR71_GPIO_LED_D25	0
+#define UBNT_LS_SR71_GPIO_LED_D26	1
+#define UBNT_LS_SR71_GPIO_LED_D24	2
+#define UBNT_LS_SR71_GPIO_LED_D23	4
+#define UBNT_LS_SR71_GPIO_LED_D22	5
+#define UBNT_LS_SR71_GPIO_LED_D27	6
+#define UBNT_LS_SR71_GPIO_LED_D28	7
+
+#define UBNT_M_GPIO_LED_L1	0
+#define UBNT_M_GPIO_LED_L2	1
+#define UBNT_M_GPIO_LED_L3	11
+#define UBNT_M_GPIO_LED_L4	7
+#define UBNT_M_GPIO_BTN_RESET	12
+
+#define UBNT_BUTTONS_POLL_INTERVAL	20
+
+static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
+	{
+		.name		= "ubnt:green:rf",
+		.gpio		= UBNT_RS_GPIO_LED_RF,
+		.active_low	= 0,
+	}
+};
+
+static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
+	{
+		.name		= "ubnt:green:d22",
+		.gpio		= UBNT_LS_SR71_GPIO_LED_D22,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt:green:d23",
+		.gpio		= UBNT_LS_SR71_GPIO_LED_D23,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt:green:d24",
+		.gpio		= UBNT_LS_SR71_GPIO_LED_D24,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt:red:d25",
+		.gpio		= UBNT_LS_SR71_GPIO_LED_D25,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt:red:d26",
+		.gpio		= UBNT_LS_SR71_GPIO_LED_D26,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt:green:d27",
+		.gpio		= UBNT_LS_SR71_GPIO_LED_D27,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt:green:d28",
+		.gpio		= UBNT_LS_SR71_GPIO_LED_D28,
+		.active_low	= 0,
+	}
+};
+
+static struct gpio_led ubnt_m_leds_gpio[] __initdata = {
+	{
+		.name		= "ubnt:red:link1",
+		.gpio		= UBNT_M_GPIO_LED_L1,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt:orange:link2",
+		.gpio		= UBNT_M_GPIO_LED_L2,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt:green:link3",
+		.gpio		= UBNT_M_GPIO_LED_L3,
+		.active_low	= 0,
+	}, {
+		.name		= "ubnt:green:link4",
+		.gpio		= UBNT_M_GPIO_LED_L4,
+		.active_low	= 0,
+	}
+};
+
+static struct gpio_button ubnt_gpio_buttons[] __initdata = {
+	{
+		.desc		= "sw4",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= UBNT_RS_GPIO_SW4,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button ubnt_m_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= UBNT_M_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}
+};
+
+static void __init ubnt_generic_setup(void)
+{
+	ar71xx_add_device_m25p80(NULL);
+
+	ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(ubnt_gpio_buttons),
+					ubnt_gpio_buttons);
+
+	pb42_pci_init();
+}
+
+#define UBNT_RS_WAN_PHYMASK	(1 << 20)
+#define UBNT_RS_LAN_PHYMASK	((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19))
+
+static void __init ubnt_rs_setup(void)
+{
+	ubnt_generic_setup();
+
+	ar71xx_add_device_mdio(~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.speed = SPEED_100;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_usb();
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
+					ubnt_rs_leds_gpio);
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
+	     ubnt_rs_setup);
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_AR71XX, "Ubiquiti AR71xx-based board",
+	     "Ubiquiti RouterStation", ubnt_rs_setup);
+
+#define UBNT_RSPRO_WAN_PHYMASK	(1 << 4)
+#define UBNT_RSPRO_LAN_PHYMASK	((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))
+
+static void __init ubnt_rspro_setup(void)
+{
+	ubnt_generic_setup();
+
+	ar71xx_add_device_mdio(~(UBNT_RSPRO_WAN_PHYMASK | UBNT_RSPRO_LAN_PHYMASK));
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
+	ar71xx_eth1_data.speed = SPEED_1000;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_usb();
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
+					ubnt_rs_leds_gpio);
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
+	     ubnt_rspro_setup);
+
+static void __init ubnt_lsx_setup(void)
+{
+	ubnt_generic_setup();
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
+
+#define UBNT_LSSR71_PHY_MASK	(1 << 1)
+
+static void __init ubnt_lssr71_setup(void)
+{
+	ubnt_generic_setup();
+
+	ar71xx_add_device_mdio(~UBNT_LSSR71_PHY_MASK);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ar71xx_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
+
+	ar71xx_add_device_eth(0);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
+					ubnt_ls_sr71_leds_gpio);
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
+	     ubnt_lssr71_setup);
+
+static void __init ubnt_m_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(mac);
+
+	ar71xx_add_device_m25p80(NULL);
+
+	ar71xx_add_device_mdio(~0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_data.fifo_cfg1 = 0x0010ffff;
+	ar71xx_eth0_data.fifo_cfg2 = 0x015500aa;
+	ar71xx_eth0_data.fifo_cfg3 = 0x01f00140;
+
+	ar71xx_add_device_eth(0);
+
+	ap91_pci_init(ee, NULL);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio),
+					ubnt_m_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(ubnt_m_gpio_buttons),
+					ubnt_m_gpio_buttons);
+}
+
+static void __init ubnt_rocket_m_setup(void)
+{
+	ubnt_m_setup();
+	ar71xx_add_device_usb();
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
+	     ubnt_m_setup);
+MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
+	     ubnt_rocket_m_setup);
+
+/* TODO detect the second ethernet port and use one
+   init function for all Ubiquiti MIMO series products */
+static void __init ubnt_nano_m_setup(void)
+{
+	ubnt_m_setup();
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.speed = SPEED_1000;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+	ar71xx_eth1_data.fifo_cfg1 = 0x0010ffff;
+	ar71xx_eth1_data.fifo_cfg2 = 0x015500aa;
+	ar71xx_eth1_data.fifo_cfg3 = 0x01f00140;
+
+	ar71xx_add_device_eth(1);
+}
+
+MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
+	     ubnt_nano_m_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wndr3700.c linux-2.6.35.7/arch/mips/ar71xx/mach-wndr3700.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wndr3700.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-wndr3700.c	2010-10-14 20:27:58.228101285 +0200
@@ -0,0 +1,209 @@
+/*
+ *  Netgear WNDR3700 board support
+ *
+ *  Copyright (C) 2009 Marco Porsch
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <linux/rtl8366s.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap94-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define WNDR3700_GPIO_LED_WPS_ORANGE	0
+#define WNDR3700_GPIO_LED_POWER_ORANGE	1
+#define WNDR3700_GPIO_LED_POWER_GREEN	2
+#define WNDR3700_GPIO_LED_WPS_GREEN	4
+#define WNDR3700_GPIO_LED_WAN_GREEN	6
+
+#define WNDR3700_GPIO_BTN_WPS		3
+#define WNDR3700_GPIO_BTN_RESET		8
+#define WNDR3700_GPIO_BTN_WIFI		11
+
+#define WNDR3700_GPIO_RTL8366_SDA	5
+#define WNDR3700_GPIO_RTL8366_SCK	7
+
+#define WNDR3700_BUTTONS_POLL_INTERVAL    20
+
+#define WNDR3700_WMAC0_MAC_OFFSET	0
+#define WNDR3700_WMAC1_MAC_OFFSET	0xc
+#define WNDR3700_CALDATA0_OFFSET	0x1000
+#define WNDR3700_CALDATA1_OFFSET	0x5000
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wndr3700_partitions[] = {
+	{
+		.name		= "uboot",
+		.offset		= 0,
+		.size		= 0x050000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "env",
+		.offset		= 0x050000,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x070000,
+		.size		= 0x720000,
+	} , {
+		.name		= "config",
+		.offset		= 0x790000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "config_bak",
+		.offset		= 0x7a0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "pot",
+		.offset		= 0x7b0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "traffic_meter",
+		.offset		= 0x7c0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "language",
+		.offset		= 0x7d0000,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "caldata",
+		.offset		= 0x7f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data wndr3700_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = wndr3700_partitions,
+        .nr_parts       = ARRAY_SIZE(wndr3700_partitions),
+#endif
+};
+
+static struct gpio_led wndr3700_leds_gpio[] __initdata = {
+	{
+		.name		= "wndr3700:green:power",
+		.gpio		= WNDR3700_GPIO_LED_POWER_GREEN,
+		.active_low	= 1,
+	}, {
+		.name		= "wndr3700:orange:power",
+		.gpio		= WNDR3700_GPIO_LED_POWER_ORANGE,
+		.active_low	= 1,
+	}, {
+		.name		= "wndr3700:green:wps",
+		.gpio		= WNDR3700_GPIO_LED_WPS_GREEN,
+		.active_low	= 1,
+	}, {
+		.name		= "wndr3700:orange:wps",
+		.gpio		= WNDR3700_GPIO_LED_WPS_ORANGE,
+		.active_low	= 1,
+	}, {
+		.name		= "wndr3700:green:wan",
+		.gpio		= WNDR3700_GPIO_LED_WAN_GREEN,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button wndr3700_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= WNDR3700_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= WNDR3700_GPIO_BTN_WPS,
+		.active_low	= 1,
+	} , {
+		.desc		= "wifi",
+		.type		= EV_KEY,
+		.code		= BTN_2,
+		.threshold	= 3,
+		.gpio		= WNDR3700_GPIO_BTN_WIFI,
+		.active_low	= 1,
+	}
+};
+
+static struct rtl8366s_platform_data wndr3700_rtl8366s_data = {
+	.gpio_sda        = WNDR3700_GPIO_RTL8366_SDA,
+	.gpio_sck        = WNDR3700_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wndr3700_rtl8366s_device = {
+	.name		= RTL8366S_DRIVER_NAME,
+	.id		= -1,
+	.dev = {
+		.platform_data	= &wndr3700_rtl8366s_data,
+	}
+};
+
+static void __init wndr3700_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ar71xx_set_mac_base(art);
+
+	ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
+	ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.speed = SPEED_1000;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
+	ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth1_data.phy_mask = 0x10;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_usb();
+
+	ar71xx_add_device_m25p80(&wndr3700_flash_data);
+
+        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
+				    wndr3700_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, WNDR3700_BUTTONS_POLL_INTERVAL,
+				      ARRAY_SIZE(wndr3700_gpio_buttons),
+				      wndr3700_gpio_buttons);
+
+	platform_device_register(&wndr3700_rtl8366s_device);
+	platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
+
+	ap94_pci_enable_quirk_wndr3700();
+	ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
+		      art + WNDR3700_WMAC0_MAC_OFFSET,
+		      art + WNDR3700_CALDATA1_OFFSET,
+		      art + WNDR3700_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(AR71XX_MACH_WNDR3700, "WNDR3700", "NETGEAR WNDR3700",
+	     wndr3700_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wnr2000.c linux-2.6.35.7/arch/mips/ar71xx/mach-wnr2000.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wnr2000.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-wnr2000.c	2010-10-14 20:27:58.268101150 +0200
@@ -0,0 +1,148 @@
+/*
+ *  NETGEAR WNR2000 board support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *  Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define WNR2000_GPIO_LED_PWR_GREEN	14
+#define WNR2000_GPIO_LED_PWR_AMBER	7
+#define WNR2000_GPIO_LED_WPS		4
+#define WNR2000_GPIO_LED_WLAN		6
+#define WNR2000_GPIO_BTN_RESET		21
+#define WNR2000_GPIO_BTN_WPS		8
+
+#define WNR2000_BUTTONS_POLL_INTERVAL	20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wnr2000_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x040000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "u-boot-env",
+		.offset		= 0x040000,
+		.size		= 0x010000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x050000,
+		.size		= 0x240000,
+	} , {
+		.name		= "user-config",
+		.offset		= 0x290000,
+		.size		= 0x010000,
+	} , {
+		.name		= "uImage",
+		.offset		= 0x2a0000,
+		.size		= 0x120000,
+	} , {
+		.name		= "language_table",
+		.offset		= 0x3c0000,
+		.size		= 0x020000,
+	} , {
+		.name		= "rootfs_checksum",
+		.offset		= 0x3e0000,
+		.size		= 0x010000,
+	} , {
+		.name		= "art",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data wnr2000_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = wnr2000_partitions,
+        .nr_parts       = ARRAY_SIZE(wnr2000_partitions),
+#endif
+};
+
+static struct gpio_led wnr2000_leds_gpio[] __initdata = {
+	{
+		.name		= "wnr2000:green:power",
+		.gpio		= WNR2000_GPIO_LED_PWR_GREEN,
+		.active_low	= 1,
+	}, {
+		.name		= "wnr2000:amber:power",
+		.gpio		= WNR2000_GPIO_LED_PWR_AMBER,
+		.active_low	= 1,
+	}, {
+		.name		= "wnr2000:green:wps",
+		.gpio		= WNR2000_GPIO_LED_WPS,
+		.active_low	= 1,
+	}, {
+		.name		= "wnr2000:blue:wlan",
+		.gpio		= WNR2000_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button wnr2000_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= WNR2000_GPIO_BTN_RESET,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= WNR2000_GPIO_BTN_WPS,
+	}
+};
+
+static void __init wnr2000_setup(void)
+{
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(eeprom);
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_data.has_ar8216 = 1;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = 0x10;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_m25p80(&wnr2000_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
+					wnr2000_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, WNR2000_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(wnr2000_gpio_buttons),
+					wnr2000_gpio_buttons);
+
+
+	ar913x_add_device_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(AR71XX_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wp543.c linux-2.6.35.7/arch/mips/ar71xx/mach-wp543.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wp543.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-wp543.c	2010-10-14 20:27:58.314545632 +0200
@@ -0,0 +1,99 @@
+/*
+ *  Compex WP543/WPJ543 board support
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define WP543_GPIO_SW6		2
+#define WP543_GPIO_LED_1	3
+#define WP543_GPIO_LED_2	4
+#define WP543_GPIO_LED_WLAN	5
+#define WP543_GPIO_LED_CONN	6
+#define WP543_GPIO_LED_DIAG	7
+#define WP543_GPIO_SW4		8
+
+#define WP543_BUTTONS_POLL_INTERVAL	20
+
+static struct gpio_led wp543_leds_gpio[] __initdata = {
+	{
+		.name		= "wp543:green:led1",
+		.gpio		= WP543_GPIO_LED_1,
+		.active_low	= 1,
+	}, {
+		.name		= "wp543:green:led2",
+		.gpio		= WP543_GPIO_LED_2,
+		.active_low	= 1,
+	}, {
+		.name		= "wp543:green:wlan",
+		.gpio		= WP543_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}, {
+		.name		= "wp543:green:conn",
+		.gpio		= WP543_GPIO_LED_CONN,
+		.active_low	= 1,
+	}, {
+		.name		= "wp543:green:diag",
+		.gpio		= WP543_GPIO_LED_DIAG,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button wp543_gpio_buttons[] __initdata = {
+	{
+		.desc		= "sw6",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.threshold	= 3,
+		.gpio		= WP543_GPIO_SW6,
+	}, {
+		.desc		= "sw4",
+		.type		= EV_KEY,
+		.code		= BTN_1,
+		.threshold	= 3,
+		.gpio		= WP543_GPIO_SW4,
+	}
+};
+
+static void __init wp543_setup(void)
+{
+	ar71xx_add_device_m25p80(NULL);
+
+	ar71xx_add_device_mdio(0xfffffff7);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ar71xx_eth0_data.phy_mask = 0x08;
+	ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC |
+				     RESET_MODULE_GE0_PHY;
+	ar71xx_add_device_eth(0);
+
+	ar71xx_add_device_usb();
+
+	pb42_pci_init();
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
+					wp543_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(wp543_gpio_buttons),
+					wp543_gpio_buttons);
+}
+
+MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wrt160nl.c linux-2.6.35.7/arch/mips/ar71xx/mach-wrt160nl.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wrt160nl.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-wrt160nl.c	2010-10-14 20:27:58.364348612 +0200
@@ -0,0 +1,158 @@
+/*
+ *  Linksys WRT160NL board support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "nvram.h"
+
+#define WRT160NL_GPIO_LED_POWER		14
+#define WRT160NL_GPIO_LED_WPS_AMBER	9
+#define WRT160NL_GPIO_LED_WPS_BLUE	8
+#define WRT160NL_GPIO_LED_WLAN		6
+
+#define WRT160NL_GPIO_BTN_WPS		7
+#define WRT160NL_GPIO_BTN_RESET		21
+
+#define WRT160NL_BUTTONS_POLL_INTERVAL	20
+
+#define WRT160NL_NVRAM_ADDR	0x1f7e0000
+#define WRT160NL_NVRAM_SIZE	0x10000
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wrt160nl_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x040000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x040000,
+		.size		= 0x0e0000,
+	} , {
+		.name		= "filesytem",
+		.offset		= 0x120000,
+		.size		= 0x6c0000,
+	} , {
+		.name		= "nvram",
+		.offset		= 0x7e0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "ART",
+		.offset		= 0x7f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x040000,
+		.size		= 0x7a0000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data wrt160nl_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = wrt160nl_partitions,
+        .nr_parts       = ARRAY_SIZE(wrt160nl_partitions),
+#endif
+};
+
+static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
+	{
+		.name		= "wrt160nl:blue:power",
+		.gpio		= WRT160NL_GPIO_LED_POWER,
+		.active_low	= 1,
+		.default_trigger = "default-on",
+	}, {
+		.name		= "wrt160nl:amber:wps",
+		.gpio		= WRT160NL_GPIO_LED_WPS_AMBER,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt160nl:blue:wps",
+		.gpio		= WRT160NL_GPIO_LED_WPS_BLUE,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt160nl:blue:wlan",
+		.gpio		= WRT160NL_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button wrt160nl_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= WRT160NL_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= WRT160NL_GPIO_BTN_WPS,
+		.active_low	= 1,
+	}
+};
+
+static void __init wrt160nl_setup(void)
+{
+	const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR);
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+	u8 mac[6];
+
+	if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
+			         "lan_hwaddr=", mac) == 0)
+		ar71xx_set_mac_base(mac);
+
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.phy_mask = 0x01;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = 0x10;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_m25p80(&wrt160nl_flash_data);
+
+	ar71xx_add_device_usb();
+
+	if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
+			         "wl0_hwaddr=", mac) == 0)
+		ar913x_add_device_wmac(eeprom, mac);
+	else
+		ar913x_add_device_wmac(eeprom, NULL);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
+					wrt160nl_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, WRT160NL_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(wrt160nl_gpio_buttons),
+					wrt160nl_gpio_buttons);
+
+}
+
+MIPS_MACHINE(AR71XX_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL",
+	     wrt160nl_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wrt400n.c linux-2.6.35.7/arch/mips/ar71xx/mach-wrt400n.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wrt400n.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-wrt400n.c	2010-10-14 20:27:58.414355031 +0200
@@ -0,0 +1,168 @@
+/*
+ *  Linksys WRT400N board support
+ *
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-ap94-pci.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+
+#define WRT400N_GPIO_LED_ORANGE	5
+#define WRT400N_GPIO_LED_GREEN	4
+#define WRT400N_GPIO_LED_POWER	1
+#define WRT400N_GPIO_LED_WLAN	0
+
+#define WRT400N_GPIO_BTN_RESET	8
+#define WRT400N_GPIO_BTN_WLSEC	3
+
+#define WRT400N_BUTTONS_POLL_INTERVAL	20
+
+#define WRT400N_MAC_ADDR_OFFSET		0x120c
+#define WRT400N_CALDATA0_OFFSET		0x1000
+#define WRT400N_CALDATA1_OFFSET		0x5000
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wrt400n_partitions[] = {
+	{
+		.name		= "uboot",
+		.offset		= 0,
+		.size		= 0x030000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "env",
+		.offset		= 0x030000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "linux",
+		.offset		= 0x040000,
+		.size		= 0x140000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x180000,
+		.size		= 0x630000,
+	} , {
+		.name		= "nvram",
+		.offset		= 0x7b0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "factory",
+		.offset		= 0x7c0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "language",
+		.offset		= 0x7d0000,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "caldata",
+		.offset		= 0x7f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "firmware",
+		.offset		= 0x040000,
+		.size		= 0x770000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data wrt400n_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = wrt400n_partitions,
+        .nr_parts       = ARRAY_SIZE(wrt400n_partitions),
+#endif
+};
+
+static struct gpio_led wrt400n_leds_gpio[] __initdata = {
+	{
+		.name		= "wrt400n:green:status",
+		.gpio		= WRT400N_GPIO_LED_GREEN,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt400n:amber:aoss",
+		.gpio		= WRT400N_GPIO_LED_ORANGE,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt400n:green:wlan",
+		.gpio		= WRT400N_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt400n:green:power",
+		.gpio		= WRT400N_GPIO_LED_POWER,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button wrt400n_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= WRT400N_GPIO_BTN_RESET,
+		.active_low	= 1,
+	} , {
+		.desc		= "wlsec",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= WRT400N_GPIO_BTN_WLSEC,
+		.active_low	= 1,
+	}
+};
+
+static void __init wrt400n_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+	u8 mac[6];
+	int i;
+
+	memcpy(mac, art + WRT400N_MAC_ADDR_OFFSET, 6);
+	for (i = 5; i >= 3; i--)
+		if (++mac[i] != 0x00) break;
+
+	ar71xx_set_mac_base(mac);
+
+	ar71xx_add_device_mdio(0x0);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth0_data.speed = SPEED_100;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+	ar71xx_eth1_data.phy_mask = 0x10;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_m25p80(&wrt400n_flash_data);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
+					wrt400n_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, WRT400N_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(wrt400n_gpio_buttons),
+					wrt400n_gpio_buttons);
+
+	ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL,
+		      art + WRT400N_CALDATA1_OFFSET, NULL);
+}
+
+MIPS_MACHINE(AR71XX_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wzr-hp-g300nh.c linux-2.6.35.7/arch/mips/ar71xx/mach-wzr-hp-g300nh.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/mach-wzr-hp-g300nh.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/mach-wzr-hp-g300nh.c	2010-10-14 20:27:58.455673598 +0200
@@ -0,0 +1,265 @@
+/*
+ *  Buffalo WZR-HP-G300NH board support
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/nxp_74hc153.h>
+#include <linux/rtl8366s.h>
+
+#include <asm/mips_machine.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/ar91xx_flash.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define WZRHPG300NH_GPIO_LED_USB	0
+#define WZRHPG300NH_GPIO_LED_DIAG	1
+#define WZRHPG300NH_GPIO_LED_WIRELESS	6
+#define WZRHPG300NH_GPIO_LED_SECURITY	17
+#define WZRHPG300NH_GPIO_LED_ROUTER	18
+
+#define WZRHPG300NH_GPIO_RTL8366_SDA	19
+#define WZRHPG300NH_GPIO_RTL8366_SCK	20
+
+#define WZRHPG300NH_GPIO_74HC153_S0	9
+#define WZRHPG300NH_GPIO_74HC153_S1	11
+#define WZRHPG300NH_GPIO_74HC153_1Y	12
+#define WZRHPG300NH_GPIO_74HC153_2Y	14
+
+#define WZRHPG300NH_GPIO_EXP_BASE	32
+#define WZRHPG300NH_GPIO_BTN_AOSS	(WZRHPG300NH_GPIO_EXP_BASE + 0)
+#define WZRHPG300NH_GPIO_BTN_RESET	(WZRHPG300NH_GPIO_EXP_BASE + 1)
+#define WZRHPG300NH_GPIO_BTN_ROUTER_ON	(WZRHPG300NH_GPIO_EXP_BASE + 2)
+#define WZRHPG300NH_GPIO_BTN_QOS_ON	(WZRHPG300NH_GPIO_EXP_BASE + 3)
+#define WZRHPG300NH_GPIO_BTN_USB	(WZRHPG300NH_GPIO_EXP_BASE + 5)
+#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6)
+#define WZRHPG300NH_GPIO_BTN_QOS_OFF	(WZRHPG300NH_GPIO_EXP_BASE + 7)
+
+#define WZRHPG300NH_BUTTONS_POLL_INTERVAL	20
+
+#define WZRHPG300NH_MAC_OFFSET		0x20c
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wzrhpg300nh_flash_partitions[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x0040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "u-boot-env",
+		.offset		= 0x0040000,
+		.size		= 0x0020000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= 0x0060000,
+		.size		= 0x0100000,
+	}, {
+		.name		= "rootfs",
+		.offset		= 0x0160000,
+		.size		= 0x1e60000,
+	}, {
+		.name		= "user_property",
+		.offset		= 0x1fc0000,
+		.size		= 0x0020000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "art",
+		.offset		= 0x1fe0000,
+		.size		= 0x0020000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "firmware",
+		.offset		= 0x0060000,
+		.size		= 0x1f60000,
+	}
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct ar91xx_flash_platform_data wzrhpg300nh_flash_data = {
+	.width		= 2,
+#ifdef CONFIG_MTD_PARTITIONS
+        .parts          = wzrhpg300nh_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(wzrhpg300nh_flash_partitions),
+#endif
+};
+
+#define WZRHPG300NH_FLASH_BASE	0x1e000000
+#define WZRHPG300NH_FLASH_SIZE	(32 * 1024 * 1024)
+
+static struct resource wzrhpg300nh_flash_resources[] = {
+	[0] = {
+		.start	= WZRHPG300NH_FLASH_BASE,
+		.end	= WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device wzrhpg300nh_flash_device = {
+	.name		= "ar91xx-flash",
+	.id		= -1,
+	.resource	= wzrhpg300nh_flash_resources,
+	.num_resources	= ARRAY_SIZE(wzrhpg300nh_flash_resources),
+	.dev		= {
+		.platform_data = &wzrhpg300nh_flash_data,
+	}
+};
+
+static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = {
+	{
+		.name		= "wzr-hp-g300nh:orange:security",
+		.gpio		= WZRHPG300NH_GPIO_LED_SECURITY,
+		.active_low	= 1,
+	}, {
+		.name		= "wzr-hp-g300nh:green:wireless",
+		.gpio		= WZRHPG300NH_GPIO_LED_WIRELESS,
+		.active_low	= 1,
+	}, {
+		.name		= "wzr-hp-g300nh:green:router",
+		.gpio		= WZRHPG300NH_GPIO_LED_ROUTER,
+		.active_low	= 1,
+	}, {
+		.name		= "wzr-hp-g300nh:red:diag",
+		.gpio		= WZRHPG300NH_GPIO_LED_DIAG,
+		.active_low	= 1,
+	}, {
+		.name		= "wzr-hp-g300nh:blue:usb",
+		.gpio		= WZRHPG300NH_GPIO_LED_USB,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button wzrhpg300nh_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= WZRHPG300NH_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "aoss",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= WZRHPG300NH_GPIO_BTN_AOSS,
+		.active_low	= 1,
+	}, {
+		.desc		= "usb",
+		.type		= EV_KEY,
+		.code		= BTN_2,
+		.threshold	= 3,
+		.gpio		= WZRHPG300NH_GPIO_BTN_USB,
+		.active_low	= 1,
+	}, {
+		.desc		= "qos_on",
+		.type		= EV_KEY,
+		.code		= BTN_3,
+		.threshold	= 3,
+		.gpio		= WZRHPG300NH_GPIO_BTN_QOS_ON,
+		.active_low	= 0,
+	}, {
+		.desc		= "qos_off",
+		.type		= EV_KEY,
+		.code		= BTN_4,
+		.threshold	= 3,
+		.gpio		= WZRHPG300NH_GPIO_BTN_QOS_OFF,
+		.active_low	= 0,
+	}, {
+		.desc		= "router_on",
+		.type		= EV_KEY,
+		.code		= BTN_5,
+		.threshold	= 3,
+		.gpio		= WZRHPG300NH_GPIO_BTN_ROUTER_ON,
+		.active_low	= 0,
+	}, {
+		.desc		= "router_auto",
+		.type		= EV_KEY,
+		.code		= BTN_6,
+		.threshold	= 3,
+		.gpio		= WZRHPG300NH_GPIO_BTN_ROUTER_AUTO,
+		.active_low	= 0,
+	}
+};
+
+static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = {
+	.gpio_base	= WZRHPG300NH_GPIO_EXP_BASE,
+	.gpio_pin_s0	= WZRHPG300NH_GPIO_74HC153_S0,
+	.gpio_pin_s1	= WZRHPG300NH_GPIO_74HC153_S1,
+	.gpio_pin_1y	= WZRHPG300NH_GPIO_74HC153_1Y,
+	.gpio_pin_2y	= WZRHPG300NH_GPIO_74HC153_2Y,
+};
+
+static struct platform_device wzrhpg300nh_74hc153_device = {
+	.name		= NXP_74HC153_DRIVER_NAME,
+	.id		= -1,
+	.dev = {
+		.platform_data	= &wzrhpg300nh_74hc153_data,
+	}
+};
+
+static struct rtl8366s_platform_data wzrhpg300nh_rtl8366s_data = {
+	.gpio_sda        = WZRHPG300NH_GPIO_RTL8366_SDA,
+	.gpio_sck        = WZRHPG300NH_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wzrhpg300nh_rtl8366s_device = {
+	.name		= RTL8366S_DRIVER_NAME,
+	.id		= -1,
+	.dev = {
+		.platform_data	= &wzrhpg300nh_rtl8366s_data,
+	}
+};
+
+static void __init wzrhpg300nh_setup(void)
+{
+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+	ar71xx_set_mac_base(eeprom + WZRHPG300NH_MAC_OFFSET);
+
+	ar71xx_eth0_pll_data.pll_1000 = 0x1e000100;
+	ar71xx_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.speed = SPEED_1000;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+	ar71xx_eth1_pll_data.pll_1000 = 0x1e000100;
+	ar71xx_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth1_data.phy_mask = 0x10;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	ar71xx_add_device_usb();
+	ar913x_add_device_wmac(eeprom, NULL);
+
+	platform_device_register(&wzrhpg300nh_74hc153_device);
+	platform_device_register(&wzrhpg300nh_flash_device);
+	platform_device_register(&wzrhpg300nh_rtl8366s_device);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
+				    wzrhpg300nh_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, WZRHPG300NH_BUTTONS_POLL_INTERVAL,
+				       ARRAY_SIZE(wzrhpg300nh_gpio_buttons),
+				       wzrhpg300nh_gpio_buttons);
+
+}
+
+MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
+	     "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/Makefile linux-2.6.35.7/arch/mips/ar71xx/Makefile
--- linux-2.6.35.7.orig/arch/mips/ar71xx/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/Makefile	2010-10-14 20:27:58.505507309 +0200
@@ -0,0 +1,54 @@
+#
+# Makefile for the Atheros AR71xx SoC specific parts of the kernel
+#
+# Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+
+obj-y	:= prom.o irq.o setup.o devices.o gpio.o ar71xx.o
+
+obj-$(CONFIG_EARLY_PRINTK)		+= early_printk.o
+obj-$(CONFIG_PCI)			+= pci.o
+
+obj-$(CONFIG_AR71XX_DEV_AP91_ETH)	+= dev-ap91-eth.o
+obj-$(CONFIG_AR71XX_DEV_AP91_PCI)	+= dev-ap91-pci.o
+obj-$(CONFIG_AR71XX_DEV_AP94_PCI)	+= dev-ap94-pci.o
+obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC)	+= dev-ar913x-wmac.o
+obj-$(CONFIG_AR71XX_DEV_DSA)		+= dev-dsa.o
+obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS)	+= dev-gpio-buttons.o
+obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO)	+= dev-leds-gpio.o
+obj-$(CONFIG_AR71XX_DEV_M25P80)		+= dev-m25p80.o
+obj-$(CONFIG_AR71XX_DEV_PB42_PCI)	+= dev-pb42-pci.o
+obj-$(CONFIG_AR71XX_DEV_PB9X_PCI)	+= dev-pb9x-pci.o
+obj-$(CONFIG_AR71XX_DEV_USB)		+= dev-usb.o
+
+obj-$(CONFIG_AR71XX_NVRAM)		+= nvram.o
+
+obj-$(CONFIG_AR71XX_MACH_AP81)		+= mach-ap81.o
+obj-$(CONFIG_AR71XX_MACH_AP83)		+= mach-ap83.o
+obj-$(CONFIG_AR71XX_MACH_AW_NR580)	+= mach-aw-nr580.o
+obj-$(CONFIG_AR71XX_MACH_DIR_600_A1)	+= mach-dir-600-a1.o
+obj-$(CONFIG_AR71XX_MACH_DIR_615_C1)	+= mach-dir-615-c1.o
+obj-$(CONFIG_AR71XX_MACH_DIR_825_B1)	+= mach-dir-825-b1.o
+obj-$(CONFIG_AR71XX_MACH_MZK_W04NU)	+= mach-mzk-w04nu.o
+obj-$(CONFIG_AR71XX_MACH_MZK_W300NH)	+= mach-mzk-w300nh.o
+obj-$(CONFIG_AR71XX_MACH_NBG460N)	+= mach-nbg460n.o
+obj-$(CONFIG_AR71XX_MACH_PB42)		+= mach-pb42.o
+obj-$(CONFIG_AR71XX_MACH_PB44)		+= mach-pb44.o
+obj-$(CONFIG_AR71XX_MACH_PB92)		+= mach-pb92.o
+obj-$(CONFIG_AR71XX_MACH_RB4XX)		+= mach-rb4xx.o
+obj-$(CONFIG_AR71XX_MACH_RB750)		+= mach-rb750.o
+obj-$(CONFIG_AR71XX_MACH_TEW_632BRP)	+= mach-tew-632brp.o
+obj-$(CONFIG_AR71XX_MACH_TL_WR741ND)	+= mach-tl-wr741nd.o
+obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1)	+= mach-tl-wr841n.o
+obj-$(CONFIG_AR71XX_MACH_TL_WR941ND)	+= mach-tl-wr941nd.o
+obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND)	+= mach-tl-wr1043nd.o
+obj-$(CONFIG_AR71XX_MACH_UBNT)		+= mach-ubnt.o
+obj-$(CONFIG_AR71XX_MACH_WNDR3700)	+= mach-wndr3700.o
+obj-$(CONFIG_AR71XX_MACH_WNR2000)	+= mach-wnr2000.o
+obj-$(CONFIG_AR71XX_MACH_WP543)		+= mach-wp543.o
+obj-$(CONFIG_AR71XX_MACH_WRT160NL)	+= mach-wrt160nl.o
+obj-$(CONFIG_AR71XX_MACH_WRT400N)	+= mach-wrt400n.o
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/nvram.c linux-2.6.35.7/arch/mips/ar71xx/nvram.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/nvram.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/nvram.c	2010-10-14 20:27:58.555317270 +0200
@@ -0,0 +1,75 @@
+/*
+ *  Atheros AR71xx minimal nvram support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include "nvram.h"
+
+char *nvram_find_var(const char *name, const char *buf, unsigned buf_len)
+{
+	unsigned len = strlen(name);
+	char *cur, *last;
+
+	if (buf_len == 0 || len == 0)
+		return NULL;
+
+	if (buf_len < len)
+		return NULL;
+
+	if (len == 1)
+		return memchr(buf, (int) *name, buf_len);
+
+	last = (char *) buf + buf_len - len;
+	for (cur = (char *) buf; cur <= last; cur++)
+		if (cur[0] == name[0] && memcmp(cur, name, len) == 0)
+			return cur + len;
+
+	return NULL;
+}
+
+int nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
+			 const char *name, char *mac)
+{
+	char *buf;
+	char *mac_str;
+	int ret;
+	int t;
+
+	buf = vmalloc(nvram_len);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf, nvram, nvram_len);
+	buf[nvram_len - 1] = '\0';
+
+	mac_str = nvram_find_var(name, buf, nvram_len);
+	if (!mac_str) {
+		ret = -EINVAL;
+		goto free;
+	}
+
+	t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+		   &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
+
+	if (t != 6) {
+		ret = -EINVAL;
+		goto free;
+	}
+
+	ret = 0;
+
+ free:
+	vfree(buf);
+	return ret;
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/nvram.h linux-2.6.35.7/arch/mips/ar71xx/nvram.h
--- linux-2.6.35.7.orig/arch/mips/ar71xx/nvram.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/nvram.h	2010-10-14 20:27:58.608101134 +0200
@@ -0,0 +1,19 @@
+/*
+ *  Atheros AR71xx minimal nvram support
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_NVRAM_H
+#define _AR71XX_NVRAM_H
+
+char *nvram_find_var(const char *name, const char *buf,
+		     unsigned buf_len) __init;
+int nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
+			 const char *name, char *mac) __init;
+
+#endif /* _AR71XX_NVRAM_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/pci.c linux-2.6.35.7/arch/mips/ar71xx/pci.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/pci.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/pci.c	2010-10-14 20:27:58.654350228 +0200
@@ -0,0 +1,93 @@
+/*
+ *  Atheros AR71xx PCI setup code
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+
+#include <asm/traps.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+unsigned ar71xx_pci_nr_irqs __initdata;
+struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata;
+
+int (*ar71xx_pci_plat_dev_init)(struct pci_dev *dev);
+
+static int ar71xx_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	int err = 0;
+
+	err = ar71xx_pci_be_handler(is_fixup);
+
+	return (is_fixup && !err) ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	if (ar71xx_pci_plat_dev_init)
+		return ar71xx_pci_plat_dev_init(dev);
+
+	return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+{
+	int ret = 0;
+
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7130:
+	case AR71XX_SOC_AR7141:
+	case AR71XX_SOC_AR7161:
+		ret = ar71xx_pcibios_map_irq(dev, slot, pin);
+		break;
+
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		ret = ar724x_pcibios_map_irq(dev, slot, pin);
+		break;
+
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+int __init ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map)
+{
+	int ret = 0;
+
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7130:
+	case AR71XX_SOC_AR7141:
+	case AR71XX_SOC_AR7161:
+		board_be_handler = ar71xx_be_handler;
+		ret = ar71xx_pcibios_init();
+		break;
+
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		ret = ar724x_pcibios_init();
+		break;
+
+	default:
+		return 0;
+	}
+
+	ar71xx_pci_nr_irqs = nr_irqs;
+	ar71xx_pci_irq_map = map;
+
+	return ret;
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/prom.c linux-2.6.35.7/arch/mips/ar71xx/prom.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/prom.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/prom.c	2010-10-14 20:27:58.704773879 +0200
@@ -0,0 +1,105 @@
+/*
+ *  Atheros AR71xx SoC specific prom routines
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+static inline int is_valid_ram_addr(void *addr)
+{
+	if (((u32) addr > KSEG0) &&
+	    ((u32) addr < (KSEG0 + AR71XX_MEM_SIZE_MAX)))
+		return 1;
+
+	if (((u32) addr > KSEG1) &&
+	    ((u32) addr < (KSEG1 + AR71XX_MEM_SIZE_MAX)))
+		return 1;
+
+	return 0;
+}
+
+static void __init ar71xx_prom_append_cmdline(const char *name,
+					      const char *value)
+{
+	char buf[COMMAND_LINE_SIZE];
+
+	snprintf(buf, sizeof(buf), " %s=%s", name, value);
+	strlcat(arcs_cmdline, buf, sizeof(arcs_cmdline));
+}
+
+static void __init ar71xx_prom_find_env(char **envp, const char *name)
+{
+	int len = strlen(name);
+	char **p;
+
+	if (!is_valid_ram_addr(envp))
+		return;
+
+	for (p = envp; is_valid_ram_addr(*p); p++) {
+		if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') {
+			ar71xx_prom_append_cmdline(name, *p + len + 1);
+			break;
+		}
+
+		/* RedBoot env comes in pointer pairs - key, value */
+		if (strncmp(name, *p, len) == 0 && (*p)[len] == 0)
+			if (is_valid_ram_addr(*(++p))) {
+				ar71xx_prom_append_cmdline(name, *p);
+				break;
+			}
+	}
+}
+
+static int inline ar71xx_use__image_cmdline(void) { return 0; }
+
+static __init void ar71xx_prom_init_cmdline(int argc, char **argv)
+{
+	int i;
+
+	if (ar71xx_use__image_cmdline())
+		return;
+
+	if (!is_valid_ram_addr(argv))
+		return;
+
+	for (i = 0; i < argc; i++)
+		if (is_valid_ram_addr(argv[i])) {
+			strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
+			strlcat(arcs_cmdline, argv[i], sizeof(arcs_cmdline));
+		}
+}
+
+void __init prom_init(void)
+{
+	char **envp;
+
+	printk(KERN_DEBUG "prom: fw_arg0=%08x, fw_arg1=%08x, "
+			"fw_arg2=%08x, fw_arg3=%08x\n",
+			(unsigned int)fw_arg0, (unsigned int)fw_arg1,
+			(unsigned int)fw_arg2, (unsigned int)fw_arg3);
+
+
+	ar71xx_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
+
+	envp = (char **)fw_arg2;
+	ar71xx_prom_find_env(envp, "board");
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* We do not have to prom memory to free */
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/ar71xx/setup.c linux-2.6.35.7/arch/mips/ar71xx/setup.c
--- linux-2.6.35.7.orig/arch/mips/ar71xx/setup.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/ar71xx/setup.c	2010-10-14 20:27:58.754579813 +0200
@@ -0,0 +1,310 @@
+/*
+ *  Atheros AR71xx SoC specific setup
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>		/* for mips_hpt_frequency */
+#include <asm/reboot.h>		/* for _machine_{restart,halt} */
+#include <asm/mips_machine.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+
+#define AR71XX_SYS_TYPE_LEN	64
+#define AR71XX_BASE_FREQ	40000000
+#define AR91XX_BASE_FREQ	5000000
+#define AR724X_BASE_FREQ	5000000
+
+u32 ar71xx_cpu_freq;
+EXPORT_SYMBOL_GPL(ar71xx_cpu_freq);
+
+u32 ar71xx_ahb_freq;
+EXPORT_SYMBOL_GPL(ar71xx_ahb_freq);
+
+u32 ar71xx_ddr_freq;
+EXPORT_SYMBOL_GPL(ar71xx_ddr_freq);
+
+enum ar71xx_soc_type ar71xx_soc;
+EXPORT_SYMBOL_GPL(ar71xx_soc);
+
+static char ar71xx_sys_type[AR71XX_SYS_TYPE_LEN];
+
+static void ar71xx_restart(char *command)
+{
+	ar71xx_device_stop(RESET_MODULE_FULL_CHIP);
+	for (;;)
+		if (cpu_wait)
+			cpu_wait();
+}
+
+static void ar71xx_halt(void)
+{
+	while (1)
+		cpu_wait();
+}
+
+static void __init ar71xx_detect_mem_size(void)
+{
+	unsigned long size;
+
+	for (size = AR71XX_MEM_SIZE_MIN; size < AR71XX_MEM_SIZE_MAX;
+	     size <<= 1 ) {
+		if (!memcmp(ar71xx_detect_mem_size,
+			    ar71xx_detect_mem_size + size, 1024))
+			break;
+	}
+
+	add_memory_region(0, size, BOOT_MEM_RAM);
+}
+
+static void __init ar71xx_detect_sys_type(void)
+{
+	char *chip = "????";
+	u32 id;
+	u32 major;
+	u32 minor;
+	u32 rev = 0;
+
+	id = ar71xx_reset_rr(AR71XX_RESET_REG_REV_ID);
+	major = id & REV_ID_MAJOR_MASK;
+
+	switch (major) {
+	case REV_ID_MAJOR_AR71XX:
+		minor = id & AR71XX_REV_ID_MINOR_MASK;
+		rev = id >> AR71XX_REV_ID_REVISION_SHIFT;
+		rev &= AR71XX_REV_ID_REVISION_MASK;
+		switch (minor) {
+		case AR71XX_REV_ID_MINOR_AR7130:
+			ar71xx_soc = AR71XX_SOC_AR7130;
+			chip = "7130";
+			break;
+
+		case AR71XX_REV_ID_MINOR_AR7141:
+			ar71xx_soc = AR71XX_SOC_AR7141;
+			chip = "7141";
+			break;
+
+		case AR71XX_REV_ID_MINOR_AR7161:
+			ar71xx_soc = AR71XX_SOC_AR7161;
+			chip = "7161";
+			break;
+		}
+		break;
+
+	case REV_ID_MAJOR_AR7240:
+		ar71xx_soc = AR71XX_SOC_AR7240;
+		chip = "7240";
+		rev = (id & AR724X_REV_ID_REVISION_MASK);
+		break;
+
+	case REV_ID_MAJOR_AR7241:
+		ar71xx_soc = AR71XX_SOC_AR7241;
+		chip = "7241";
+		rev = (id & AR724X_REV_ID_REVISION_MASK);
+		break;
+
+	case REV_ID_MAJOR_AR7242:
+		ar71xx_soc = AR71XX_SOC_AR7242;
+		chip = "7242";
+		rev = (id & AR724X_REV_ID_REVISION_MASK);
+		break;
+
+	case REV_ID_MAJOR_AR913X:
+		minor = id & AR91XX_REV_ID_MINOR_MASK;
+		rev = id >> AR91XX_REV_ID_REVISION_SHIFT;
+		rev &= AR91XX_REV_ID_REVISION_MASK;
+		switch (minor) {
+		case AR91XX_REV_ID_MINOR_AR9130:
+			ar71xx_soc = AR71XX_SOC_AR9130;
+			chip = "9130";
+			break;
+
+		case AR91XX_REV_ID_MINOR_AR9132:
+			ar71xx_soc = AR71XX_SOC_AR9132;
+			chip = "9132";
+			break;
+		}
+		break;
+
+	default:
+		panic("ar71xx: unknown chip id:0x%08x\n", id);
+	}
+
+	sprintf(ar71xx_sys_type, "Atheros AR%s rev %u", chip, rev);
+}
+
+static void __init ar91xx_detect_sys_frequency(void)
+{
+	u32 pll;
+	u32 freq;
+	u32 div;
+
+	pll = ar71xx_pll_rr(AR91XX_PLL_REG_CPU_CONFIG);
+
+	div = ((pll >> AR91XX_PLL_DIV_SHIFT) & AR91XX_PLL_DIV_MASK);
+	freq = div * AR91XX_BASE_FREQ;
+
+	ar71xx_cpu_freq = freq;
+
+	div = ((pll >> AR91XX_DDR_DIV_SHIFT) & AR91XX_DDR_DIV_MASK) + 1;
+	ar71xx_ddr_freq = freq / div;
+
+	div = (((pll >> AR91XX_AHB_DIV_SHIFT) & AR91XX_AHB_DIV_MASK) + 1) * 2;
+	ar71xx_ahb_freq = ar71xx_cpu_freq / div;
+}
+
+static void __init ar71xx_detect_sys_frequency(void)
+{
+	u32 pll;
+	u32 freq;
+	u32 div;
+
+	pll = ar71xx_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
+
+	div = ((pll >> AR71XX_PLL_DIV_SHIFT) & AR71XX_PLL_DIV_MASK) + 1;
+	freq = div * AR71XX_BASE_FREQ;
+
+	div = ((pll >> AR71XX_CPU_DIV_SHIFT) & AR71XX_CPU_DIV_MASK) + 1;
+	ar71xx_cpu_freq = freq / div;
+
+	div = ((pll >> AR71XX_DDR_DIV_SHIFT) & AR71XX_DDR_DIV_MASK) + 1;
+	ar71xx_ddr_freq = freq / div;
+
+	div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
+	ar71xx_ahb_freq = ar71xx_cpu_freq / div;
+}
+
+static void __init ar724x_detect_sys_frequency(void)
+{
+	u32 pll;
+	u32 freq;
+	u32 div;
+
+	pll = ar71xx_pll_rr(AR724X_PLL_REG_CPU_CONFIG);
+
+	div = ((pll >> AR724X_PLL_DIV_SHIFT) & AR724X_PLL_DIV_MASK);
+	freq = div * AR724X_BASE_FREQ;
+
+	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK);
+	freq *= div;
+
+	ar71xx_cpu_freq = freq;
+
+	div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
+	ar71xx_ddr_freq = freq / div;
+
+	div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
+	ar71xx_ahb_freq = ar71xx_cpu_freq / div;
+}
+
+static void __init detect_sys_frequency(void)
+{
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR7130:
+	case AR71XX_SOC_AR7141:
+	case AR71XX_SOC_AR7161:
+		ar71xx_detect_sys_frequency();
+		break;
+
+	case AR71XX_SOC_AR7240:
+	case AR71XX_SOC_AR7241:
+	case AR71XX_SOC_AR7242:
+		ar724x_detect_sys_frequency();
+		break;
+
+	case AR71XX_SOC_AR9130:
+	case AR71XX_SOC_AR9132:
+		ar91xx_detect_sys_frequency();
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+const char *get_system_type(void)
+{
+	return ar71xx_sys_type;
+}
+
+unsigned int __cpuinit get_c0_compare_irq(void)
+{
+	return CP0_LEGACY_COMPARE_IRQ;
+}
+
+void __init plat_mem_setup(void)
+{
+	set_io_port_base(KSEG1);
+
+	ar71xx_ddr_base = ioremap_nocache(AR71XX_DDR_CTRL_BASE,
+						AR71XX_DDR_CTRL_SIZE);
+
+	ar71xx_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
+						AR71XX_PLL_SIZE);
+
+	ar71xx_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
+						AR71XX_RESET_SIZE);
+
+	ar71xx_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+
+	ar71xx_usb_ctrl_base = ioremap_nocache(AR71XX_USB_CTRL_BASE,
+						AR71XX_USB_CTRL_SIZE);
+
+	ar71xx_detect_mem_size();
+	ar71xx_detect_sys_type();
+	detect_sys_frequency();
+
+	printk(KERN_INFO
+		"%s, CPU:%u.%03u MHz, AHB:%u.%03u MHz, DDR:%u.%03u MHz\n",
+		ar71xx_sys_type,
+		ar71xx_cpu_freq / 1000000, (ar71xx_cpu_freq / 1000) % 1000,
+		ar71xx_ahb_freq / 1000000, (ar71xx_ahb_freq / 1000) % 1000,
+		ar71xx_ddr_freq / 1000000, (ar71xx_ddr_freq / 1000) % 1000);
+
+	_machine_restart = ar71xx_restart;
+	_machine_halt = ar71xx_halt;
+	pm_power_off = ar71xx_halt;
+}
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = ar71xx_cpu_freq / 2;
+}
+
+__setup("board=", mips_machtype_setup);
+
+static int __init ar71xx_machine_setup(void)
+{
+	ar71xx_gpio_init();
+
+	ar71xx_add_device_uart();
+	ar71xx_add_device_wdt();
+
+	mips_machine_setup();
+	return 0;
+}
+
+arch_initcall(ar71xx_machine_setup);
+
+static void __init ar71xx_generic_init(void)
+{
+	/* Nothing to do */
+}
+
+MIPS_MACHINE(AR71XX_MACH_GENERIC, "Generic", "Generic AR71xx board",
+	     ar71xx_generic_init);
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/ar71xx.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/ar71xx.h	2010-10-14 20:27:58.804410665 +0200
@@ -0,0 +1,514 @@
+/*
+ *  Atheros AR71xx SoC specific definitions
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_AR71XX_H
+#define __ASM_MACH_AR71XX_H
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+
+#ifndef __ASSEMBLER__
+
+#define AR71XX_PCI_MEM_BASE	0x10000000
+#define AR71XX_PCI_MEM_SIZE	0x08000000
+#define AR71XX_APB_BASE		0x18000000
+#define AR71XX_GE0_BASE		0x19000000
+#define AR71XX_GE0_SIZE		0x01000000
+#define AR71XX_GE1_BASE		0x1a000000
+#define AR71XX_GE1_SIZE		0x01000000
+#define AR71XX_EHCI_BASE	0x1b000000
+#define AR71XX_EHCI_SIZE	0x01000000
+#define AR71XX_OHCI_BASE	0x1c000000
+#define AR71XX_OHCI_SIZE	0x01000000
+#define AR7240_OHCI_BASE	0x1b000000
+#define AR7240_OHCI_SIZE	0x01000000
+#define AR71XX_SPI_BASE		0x1f000000
+#define AR71XX_SPI_SIZE		0x01000000
+
+#define AR71XX_DDR_CTRL_BASE	(AR71XX_APB_BASE + 0x00000000)
+#define AR71XX_DDR_CTRL_SIZE	0x10000
+#define AR71XX_CPU_BASE		(AR71XX_APB_BASE + 0x00010000)
+#define AR71XX_UART_BASE	(AR71XX_APB_BASE + 0x00020000)
+#define AR71XX_UART_SIZE	0x10000
+#define AR71XX_USB_CTRL_BASE	(AR71XX_APB_BASE + 0x00030000)
+#define AR71XX_USB_CTRL_SIZE	0x10000
+#define AR71XX_GPIO_BASE	(AR71XX_APB_BASE + 0x00040000)
+#define AR71XX_GPIO_SIZE	0x10000
+#define AR71XX_PLL_BASE		(AR71XX_APB_BASE + 0x00050000)
+#define AR71XX_PLL_SIZE		0x10000
+#define AR71XX_RESET_BASE	(AR71XX_APB_BASE + 0x00060000)
+#define AR71XX_RESET_SIZE	0x10000
+#define AR71XX_MII_BASE		(AR71XX_APB_BASE + 0x00070000)
+#define AR71XX_MII_SIZE		0x10000
+#define AR71XX_SLIC_BASE	(AR71XX_APB_BASE + 0x00090000)
+#define AR71XX_SLIC_SIZE	0x10000
+#define AR71XX_DMA_BASE		(AR71XX_APB_BASE + 0x000A0000)
+#define AR71XX_DMA_SIZE		0x10000
+#define AR71XX_STEREO_BASE	(AR71XX_APB_BASE + 0x000B0000)
+#define AR71XX_STEREO_SIZE	0x10000
+
+#define AR724X_PCI_CRP_BASE	(AR71XX_APB_BASE + 0x000C0000)
+#define AR724X_PCI_CRP_SIZE	0x100
+
+#define AR724X_PCI_CTRL_BASE	(AR71XX_APB_BASE + 0x000F0000)
+#define AR724X_PCI_CTRL_SIZE	0x100
+
+#define AR91XX_WMAC_BASE	(AR71XX_APB_BASE + 0x000C0000)
+#define AR91XX_WMAC_SIZE	0x30000
+
+#define AR71XX_MEM_SIZE_MIN	0x0200000
+#define AR71XX_MEM_SIZE_MAX	0x10000000
+
+#define AR71XX_CPU_IRQ_BASE	0
+#define AR71XX_MISC_IRQ_BASE	8
+#define AR71XX_MISC_IRQ_COUNT	8
+#define AR71XX_GPIO_IRQ_BASE	16
+#define AR71XX_GPIO_IRQ_COUNT	32
+#define AR71XX_PCI_IRQ_BASE     48
+#define AR71XX_PCI_IRQ_COUNT	8
+
+#define AR71XX_CPU_IRQ_IP2	(AR71XX_CPU_IRQ_BASE + 2)
+#define AR71XX_CPU_IRQ_USB	(AR71XX_CPU_IRQ_BASE + 3)
+#define AR71XX_CPU_IRQ_GE0	(AR71XX_CPU_IRQ_BASE + 4)
+#define AR71XX_CPU_IRQ_GE1	(AR71XX_CPU_IRQ_BASE + 5)
+#define AR71XX_CPU_IRQ_MISC	(AR71XX_CPU_IRQ_BASE + 6)
+#define AR71XX_CPU_IRQ_TIMER	(AR71XX_CPU_IRQ_BASE + 7)
+
+#define AR71XX_MISC_IRQ_TIMER	(AR71XX_MISC_IRQ_BASE + 0)
+#define AR71XX_MISC_IRQ_ERROR	(AR71XX_MISC_IRQ_BASE + 1)
+#define AR71XX_MISC_IRQ_GPIO	(AR71XX_MISC_IRQ_BASE + 2)
+#define AR71XX_MISC_IRQ_UART	(AR71XX_MISC_IRQ_BASE + 3)
+#define AR71XX_MISC_IRQ_WDOG	(AR71XX_MISC_IRQ_BASE + 4)
+#define AR71XX_MISC_IRQ_PERFC	(AR71XX_MISC_IRQ_BASE + 5)
+#define AR71XX_MISC_IRQ_OHCI	(AR71XX_MISC_IRQ_BASE + 6)
+#define AR71XX_MISC_IRQ_DMA	(AR71XX_MISC_IRQ_BASE + 7)
+
+#define AR71XX_GPIO_IRQ(_x)	(AR71XX_GPIO_IRQ_BASE + (_x))
+
+#define AR71XX_PCI_IRQ_DEV0	(AR71XX_PCI_IRQ_BASE + 0)
+#define AR71XX_PCI_IRQ_DEV1	(AR71XX_PCI_IRQ_BASE + 1)
+#define AR71XX_PCI_IRQ_DEV2	(AR71XX_PCI_IRQ_BASE + 2)
+#define AR71XX_PCI_IRQ_CORE	(AR71XX_PCI_IRQ_BASE + 4)
+
+extern u32 ar71xx_ahb_freq;
+extern u32 ar71xx_cpu_freq;
+extern u32 ar71xx_ddr_freq;
+
+enum ar71xx_soc_type {
+	AR71XX_SOC_UNKNOWN,
+	AR71XX_SOC_AR7130,
+	AR71XX_SOC_AR7141,
+	AR71XX_SOC_AR7161,
+	AR71XX_SOC_AR7240,
+	AR71XX_SOC_AR7241,
+	AR71XX_SOC_AR7242,
+	AR71XX_SOC_AR9130,
+	AR71XX_SOC_AR9132
+};
+
+extern enum ar71xx_soc_type ar71xx_soc;
+
+/*
+ * PLL block
+ */
+#define AR71XX_PLL_REG_CPU_CONFIG	0x00
+#define AR71XX_PLL_REG_SEC_CONFIG	0x04
+#define AR71XX_PLL_REG_ETH0_INT_CLOCK	0x10
+#define AR71XX_PLL_REG_ETH1_INT_CLOCK	0x14
+
+#define AR71XX_PLL_DIV_SHIFT		3
+#define AR71XX_PLL_DIV_MASK		0x1f
+#define AR71XX_CPU_DIV_SHIFT		16
+#define AR71XX_CPU_DIV_MASK		0x3
+#define AR71XX_DDR_DIV_SHIFT		18
+#define AR71XX_DDR_DIV_MASK		0x3
+#define AR71XX_AHB_DIV_SHIFT		20
+#define AR71XX_AHB_DIV_MASK		0x7
+
+#define AR71XX_ETH0_PLL_SHIFT		17
+#define AR71XX_ETH1_PLL_SHIFT		19
+
+#define AR724X_PLL_REG_CPU_CONFIG	0x00
+#define AR724X_PLL_REG_PCIE_CONFIG	0x18
+
+#define AR724X_PLL_DIV_SHIFT		0
+#define AR724X_PLL_DIV_MASK		0x3ff
+#define AR724X_PLL_REF_DIV_SHIFT	10
+#define AR724X_PLL_REF_DIV_MASK		0xf
+#define AR724X_AHB_DIV_SHIFT		19
+#define AR724X_AHB_DIV_MASK		0x1
+#define AR724X_DDR_DIV_SHIFT		22
+#define AR724X_DDR_DIV_MASK		0x3
+
+#define AR91XX_PLL_REG_CPU_CONFIG	0x00
+#define AR91XX_PLL_REG_ETH_CONFIG	0x04
+#define AR91XX_PLL_REG_ETH0_INT_CLOCK	0x14
+#define AR91XX_PLL_REG_ETH1_INT_CLOCK	0x18
+
+#define AR91XX_PLL_DIV_SHIFT		0
+#define AR91XX_PLL_DIV_MASK		0x3ff
+#define AR91XX_DDR_DIV_SHIFT		22
+#define AR91XX_DDR_DIV_MASK		0x3
+#define AR91XX_AHB_DIV_SHIFT		19
+#define AR91XX_AHB_DIV_MASK		0x1
+
+#define AR91XX_ETH0_PLL_SHIFT		20
+#define AR91XX_ETH1_PLL_SHIFT		22
+
+extern void __iomem *ar71xx_pll_base;
+
+static inline void ar71xx_pll_wr(unsigned reg, u32 val)
+{
+	__raw_writel(val, ar71xx_pll_base + reg);
+}
+
+static inline u32 ar71xx_pll_rr(unsigned reg)
+{
+	return __raw_readl(ar71xx_pll_base + reg);
+}
+
+/*
+ * USB_CONFIG block
+ */
+#define USB_CTRL_REG_FLADJ	0x00
+#define USB_CTRL_REG_CONFIG	0x04
+
+extern void __iomem *ar71xx_usb_ctrl_base;
+
+static inline void ar71xx_usb_ctrl_wr(unsigned reg, u32 val)
+{
+	__raw_writel(val, ar71xx_usb_ctrl_base + reg);
+}
+
+static inline u32 ar71xx_usb_ctrl_rr(unsigned reg)
+{
+	return __raw_readl(ar71xx_usb_ctrl_base + reg);
+}
+
+/*
+ * GPIO block
+ */
+#define GPIO_REG_OE		0x00
+#define GPIO_REG_IN		0x04
+#define GPIO_REG_OUT		0x08
+#define GPIO_REG_SET		0x0c
+#define GPIO_REG_CLEAR		0x10
+#define GPIO_REG_INT_MODE	0x14
+#define GPIO_REG_INT_TYPE	0x18
+#define GPIO_REG_INT_POLARITY	0x1c
+#define GPIO_REG_INT_PENDING	0x20
+#define GPIO_REG_INT_ENABLE	0x24
+#define GPIO_REG_FUNC		0x28
+
+#define AR71XX_GPIO_FUNC_STEREO_EN	BIT(17)
+#define AR71XX_GPIO_FUNC_SLIC_EN	BIT(16)
+#define AR71XX_GPIO_FUNC_SPI_CS2_EN	BIT(13)
+#define AR71XX_GPIO_FUNC_SPI_CS1_EN	BIT(12)
+#define AR71XX_GPIO_FUNC_UART_EN	BIT(8)
+#define AR71XX_GPIO_FUNC_USB_OC_EN	BIT(4)
+#define AR71XX_GPIO_FUNC_USB_CLK_EN	BIT(0)
+
+#define AR71XX_GPIO_COUNT	16
+
+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN		BIT(19)
+#define AR724X_GPIO_FUNC_SPI_EN			BIT(18)
+#define AR724X_GPIO_FUNC_SPI_CS_EN2		BIT(14)
+#define AR724X_GPIO_FUNC_SPI_CS_EN1		BIT(13)
+#define AR724X_GPIO_FUNC_CLK_OBS5_EN		BIT(12)
+#define AR724X_GPIO_FUNC_CLK_OBS4_EN		BIT(11)
+#define AR724X_GPIO_FUNC_CLK_OBS3_EN		BIT(10)
+#define AR724X_GPIO_FUNC_CLK_OBS2_EN		BIT(9)
+#define AR724X_GPIO_FUNC_CLK_OBS1_EN		BIT(8)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN	BIT(7)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN	BIT(6)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN	BIT(5)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN	BIT(4)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN	BIT(3)
+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN	BIT(2)
+#define AR724X_GPIO_FUNC_UART_EN		BIT(1)
+#define AR724X_GPIO_FUNC_JTAG_DISABLE		BIT(0)
+
+#define AR724X_GPIO_COUNT	18
+
+#define AR91XX_GPIO_FUNC_WMAC_LED_EN	BIT(22)
+#define AR91XX_GPIO_FUNC_EXP_PORT_CS_EN	BIT(21)
+#define AR91XX_GPIO_FUNC_I2S_REFCLKEN	BIT(20)
+#define AR91XX_GPIO_FUNC_I2S_MCKEN	BIT(19)
+#define AR91XX_GPIO_FUNC_I2S1_EN	BIT(18)
+#define AR91XX_GPIO_FUNC_I2S0_EN	BIT(17)
+#define AR91XX_GPIO_FUNC_SLIC_EN	BIT(16)
+#define AR91XX_GPIO_FUNC_UART_RTSCTS_EN	BIT(9)
+#define AR91XX_GPIO_FUNC_UART_EN	BIT(8)
+#define AR91XX_GPIO_FUNC_USB_CLK_EN	BIT(4)
+
+#define AR91XX_GPIO_COUNT	22
+
+extern void __iomem *ar71xx_gpio_base;
+
+static inline void ar71xx_gpio_wr(unsigned reg, u32 value)
+{
+	__raw_writel(value, ar71xx_gpio_base + reg);
+}
+
+static inline u32 ar71xx_gpio_rr(unsigned reg)
+{
+	return __raw_readl(ar71xx_gpio_base + reg);
+}
+
+void ar71xx_gpio_init(void) __init;
+void ar71xx_gpio_function_enable(u32 mask);
+void ar71xx_gpio_function_disable(u32 mask);
+void ar71xx_gpio_function_setup(u32 set, u32 clear);
+
+/*
+ * DDR_CTRL block
+ */
+#define AR71XX_DDR_REG_PCI_WIN0		0x7c
+#define AR71XX_DDR_REG_PCI_WIN1		0x80
+#define AR71XX_DDR_REG_PCI_WIN2		0x84
+#define AR71XX_DDR_REG_PCI_WIN3		0x88
+#define AR71XX_DDR_REG_PCI_WIN4		0x8c
+#define AR71XX_DDR_REG_PCI_WIN5		0x90
+#define AR71XX_DDR_REG_PCI_WIN6		0x94
+#define AR71XX_DDR_REG_PCI_WIN7		0x98
+#define AR71XX_DDR_REG_FLUSH_GE0	0x9c
+#define AR71XX_DDR_REG_FLUSH_GE1	0xa0
+#define AR71XX_DDR_REG_FLUSH_USB	0xa4
+#define AR71XX_DDR_REG_FLUSH_PCI	0xa8
+
+#define AR724X_DDR_REG_FLUSH_GE0	0x7c
+#define AR724X_DDR_REG_FLUSH_GE1	0x80
+#define AR724X_DDR_REG_FLUSH_USB	0x84
+#define AR724X_DDR_REG_FLUSH_PCIE	0x88
+
+#define AR91XX_DDR_REG_FLUSH_GE0	0x7c
+#define AR91XX_DDR_REG_FLUSH_GE1	0x80
+#define AR91XX_DDR_REG_FLUSH_USB	0x84
+#define AR91XX_DDR_REG_FLUSH_WMAC	0x88
+
+#define PCI_WIN0_OFFS	0x10000000
+#define PCI_WIN1_OFFS	0x11000000
+#define PCI_WIN2_OFFS	0x12000000
+#define PCI_WIN3_OFFS	0x13000000
+#define PCI_WIN4_OFFS	0x14000000
+#define PCI_WIN5_OFFS	0x15000000
+#define PCI_WIN6_OFFS	0x16000000
+#define PCI_WIN7_OFFS	0x07000000
+
+extern void __iomem *ar71xx_ddr_base;
+
+static inline void ar71xx_ddr_wr(unsigned reg, u32 val)
+{
+	__raw_writel(val, ar71xx_ddr_base + reg);
+}
+
+static inline u32 ar71xx_ddr_rr(unsigned reg)
+{
+	return __raw_readl(ar71xx_ddr_base + reg);
+}
+
+void ar71xx_ddr_flush(u32 reg);
+
+/*
+ * PCI block
+ */
+#define AR71XX_PCI_CFG_BASE	(AR71XX_PCI_MEM_BASE + PCI_WIN7_OFFS + 0x10000)
+#define AR71XX_PCI_CFG_SIZE	0x100
+
+#define PCI_REG_CRP_AD_CBE	0x00
+#define PCI_REG_CRP_WRDATA	0x04
+#define PCI_REG_CRP_RDDATA	0x08
+#define PCI_REG_CFG_AD		0x0c
+#define PCI_REG_CFG_CBE		0x10
+#define PCI_REG_CFG_WRDATA	0x14
+#define PCI_REG_CFG_RDDATA	0x18
+#define PCI_REG_PCI_ERR		0x1c
+#define PCI_REG_PCI_ERR_ADDR	0x20
+#define PCI_REG_AHB_ERR		0x24
+#define PCI_REG_AHB_ERR_ADDR	0x28
+
+#define PCI_CRP_CMD_WRITE	0x00010000
+#define PCI_CRP_CMD_READ	0x00000000
+#define PCI_CFG_CMD_READ	0x0000000a
+#define PCI_CFG_CMD_WRITE	0x0000000b
+
+#define PCI_IDSEL_ADL_START	17
+
+#define AR724X_PCI_CFG_BASE	(AR71XX_PCI_MEM_BASE + 0x4000000)
+#define AR724X_PCI_CFG_SIZE	0x1000
+
+#define AR724X_PCI_REG_APP		0x00
+#define AR724X_PCI_REG_RESET		0x18
+#define AR724X_PCI_REG_INT_STATUS	0x4c
+#define AR724X_PCI_REG_INT_MASK		0x50
+
+#define AR724X_PCI_APP_LTSSM_ENABLE	BIT(0)
+#define AR724X_PCI_RESET_LINK_UP	BIT(0)
+
+#define AR724X_PCI_INT_DEV0		BIT(14)
+
+/*
+ * RESET block
+ */
+#define AR71XX_RESET_REG_TIMER			0x00
+#define AR71XX_RESET_REG_TIMER_RELOAD		0x04
+#define AR71XX_RESET_REG_WDOG_CTRL		0x08
+#define AR71XX_RESET_REG_WDOG			0x0c
+#define AR71XX_RESET_REG_MISC_INT_STATUS	0x10
+#define AR71XX_RESET_REG_MISC_INT_ENABLE	0x14
+#define AR71XX_RESET_REG_PCI_INT_STATUS		0x18
+#define AR71XX_RESET_REG_PCI_INT_ENABLE		0x1c
+#define AR71XX_RESET_REG_GLOBAL_INT_STATUS	0x20
+#define AR71XX_RESET_REG_RESET_MODULE		0x24
+#define AR71XX_RESET_REG_PERFC_CTRL		0x2c
+#define AR71XX_RESET_REG_PERFC0			0x30
+#define AR71XX_RESET_REG_PERFC1			0x34
+#define AR71XX_RESET_REG_REV_ID			0x90
+
+#define AR91XX_RESET_REG_GLOBAL_INT_STATUS	0x18
+#define AR91XX_RESET_REG_RESET_MODULE		0x1c
+#define AR91XX_RESET_REG_PERF_CTRL		0x20
+#define AR91XX_RESET_REG_PERFC0			0x24
+#define AR91XX_RESET_REG_PERFC1			0x28
+
+#define AR724X_RESET_REG_RESET_MODULE		0x1c
+
+#define WDOG_CTRL_LAST_RESET		BIT(31)
+#define WDOG_CTRL_ACTION_MASK		3
+#define WDOG_CTRL_ACTION_NONE		0	/* no action */
+#define WDOG_CTRL_ACTION_GPI		1	/* general purpose interrupt */
+#define WDOG_CTRL_ACTION_NMI		2	/* NMI */
+#define WDOG_CTRL_ACTION_FCR		3	/* full chip reset */
+
+#define MISC_INT_DMA			BIT(7)
+#define MISC_INT_OHCI			BIT(6)
+#define MISC_INT_PERFC			BIT(5)
+#define MISC_INT_WDOG			BIT(4)
+#define MISC_INT_UART			BIT(3)
+#define MISC_INT_GPIO			BIT(2)
+#define MISC_INT_ERROR			BIT(1)
+#define MISC_INT_TIMER			BIT(0)
+
+#define PCI_INT_CORE			BIT(4)
+#define PCI_INT_DEV2			BIT(2)
+#define PCI_INT_DEV1			BIT(1)
+#define PCI_INT_DEV0			BIT(0)
+
+#define RESET_MODULE_EXTERNAL		BIT(28)
+#define RESET_MODULE_FULL_CHIP		BIT(24)
+#define RESET_MODULE_AMBA2WMAC		BIT(22)
+#define RESET_MODULE_CPU_NMI		BIT(21)
+#define RESET_MODULE_CPU_COLD		BIT(20)
+#define RESET_MODULE_DMA		BIT(19)
+#define RESET_MODULE_SLIC		BIT(18)
+#define RESET_MODULE_STEREO		BIT(17)
+#define RESET_MODULE_DDR		BIT(16)
+#define RESET_MODULE_GE1_MAC		BIT(13)
+#define RESET_MODULE_GE1_PHY		BIT(12)
+#define RESET_MODULE_USBSUS_OVERRIDE	BIT(10)
+#define RESET_MODULE_GE0_MAC		BIT(9)
+#define RESET_MODULE_GE0_PHY		BIT(8)
+#define RESET_MODULE_USB_OHCI_DLL	BIT(6)
+#define RESET_MODULE_USB_HOST		BIT(5)
+#define RESET_MODULE_USB_PHY		BIT(4)
+#define RESET_MODULE_USB_OHCI_DLL_7240	BIT(3)
+#define RESET_MODULE_PCI_BUS		BIT(1)
+#define RESET_MODULE_PCI_CORE		BIT(0)
+
+#define AR724X_RESET_GE1_MDIO		BIT(23)
+#define AR724X_RESET_GE0_MDIO		BIT(22)
+#define AR724X_RESET_PCIE_PHY_SERIAL	BIT(10)
+#define AR724X_RESET_PCIE_PHY		BIT(7)
+#define AR724X_RESET_PCIE		BIT(6)
+
+#define REV_ID_MAJOR_MASK	0xfff0
+#define REV_ID_MAJOR_AR71XX	0x00a0
+#define REV_ID_MAJOR_AR913X	0x00b0
+#define REV_ID_MAJOR_AR7240	0x00c0
+#define REV_ID_MAJOR_AR7241	0x0100
+#define REV_ID_MAJOR_AR7242	0x1100
+
+#define AR71XX_REV_ID_MINOR_MASK	0x3
+#define AR71XX_REV_ID_MINOR_AR7130	0x0
+#define AR71XX_REV_ID_MINOR_AR7141	0x1
+#define AR71XX_REV_ID_MINOR_AR7161	0x2
+#define AR71XX_REV_ID_REVISION_MASK	0x3
+#define AR71XX_REV_ID_REVISION_SHIFT	2
+
+#define AR91XX_REV_ID_MINOR_MASK	0x3
+#define AR91XX_REV_ID_MINOR_AR9130	0x0
+#define AR91XX_REV_ID_MINOR_AR9132	0x1
+#define AR91XX_REV_ID_REVISION_MASK	0x3
+#define AR91XX_REV_ID_REVISION_SHIFT	2
+
+#define AR724X_REV_ID_REVISION_MASK	0x3
+
+extern void __iomem *ar71xx_reset_base;
+
+static inline void ar71xx_reset_wr(unsigned reg, u32 val)
+{
+	__raw_writel(val, ar71xx_reset_base + reg);
+}
+
+static inline u32 ar71xx_reset_rr(unsigned reg)
+{
+	return __raw_readl(ar71xx_reset_base + reg);
+}
+
+void ar71xx_device_stop(u32 mask);
+void ar71xx_device_start(u32 mask);
+int ar71xx_device_stopped(u32 mask);
+
+/*
+ * SPI block
+ */
+#define SPI_REG_FS		0x00	/* Function Select */
+#define SPI_REG_CTRL		0x04	/* SPI Control */
+#define SPI_REG_IOC		0x08	/* SPI I/O Control */
+#define SPI_REG_RDS		0x0c	/* Read Data Shift */
+
+#define SPI_FS_GPIO		BIT(0)	/* Enable GPIO mode */
+
+#define SPI_CTRL_RD		BIT(6)	/* Remap Disable */
+#define SPI_CTRL_DIV_MASK	0x3f
+
+#define SPI_IOC_DO		BIT(0)	/* Data Out pin */
+#define SPI_IOC_CLK		BIT(8)	/* CLK pin */
+#define SPI_IOC_CS(n)		BIT(16 + (n))
+#define SPI_IOC_CS0		SPI_IOC_CS(0)
+#define SPI_IOC_CS1		SPI_IOC_CS(1)
+#define SPI_IOC_CS2		SPI_IOC_CS(2)
+#define SPI_IOC_CS_ALL		(SPI_IOC_CS0 | SPI_IOC_CS1 | SPI_IOC_CS2)
+
+void ar71xx_flash_acquire(void);
+void ar71xx_flash_release(void);
+
+/*
+ * MII_CTRL block
+ */
+#define MII_REG_MII0_CTRL	0x00
+#define MII_REG_MII1_CTRL	0x04
+
+#define MII0_CTRL_IF_GMII	0
+#define MII0_CTRL_IF_MII	1
+#define MII0_CTRL_IF_RGMII	2
+#define MII0_CTRL_IF_RMII	3
+
+#define MII1_CTRL_IF_RGMII	0
+#define MII1_CTRL_IF_RMII	1
+
+#endif /* __ASSEMBLER__ */
+
+#endif /* __ASM_MACH_AR71XX_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h	2010-10-14 20:27:58.848101151 +0200
@@ -0,0 +1,26 @@
+/*
+ *  AR91xx parallel flash driver platform data definitions
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef __AR91XX_FLASH_H
+#define __AR91XX_FLASH_H
+
+struct mtd_partition;
+
+struct ar91xx_flash_platform_data {
+	unsigned int		width;
+	u8			is_shared:1;
+#ifdef CONFIG_MTD_PARTITIONS
+	unsigned int		nr_parts;
+	struct mtd_partition	*parts;
+#endif
+};
+
+#endif /* __AR91XX_FLASH_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h	2010-10-14 20:27:58.895601086 +0200
@@ -0,0 +1,56 @@
+/*
+ *  Atheros AR71xx specific CPU feature overrides
+ *
+ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_tx39_cache	0
+#define cpu_has_sb1_cache	0
+#define cpu_has_fpu		0
+#define cpu_has_32fpr		0
+#define cpu_has_counter		1
+#define cpu_has_watch		1
+#define cpu_has_divec		1
+
+#define cpu_has_prefetch	1
+#define cpu_has_ejtag		1
+#define cpu_has_llsc		1
+
+#define cpu_has_mips16		1
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	1
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+
+#define cpu_has_64bits		0
+#define cpu_has_64bit_zero_reg	0
+#define cpu_has_64bit_gp_regs	0
+#define cpu_has_64bit_addresses	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+
+#endif /* __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/gpio.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/gpio.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/gpio.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/gpio.h	2010-10-14 20:27:58.945582628 +0200
@@ -0,0 +1,53 @@
+/*
+ *  Atheros AR71xx GPIO API definitions
+ *
+ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_MACH_AR71XX_GPIO_H
+#define __ASM_MACH_AR71XX_GPIO_H
+
+#define ARCH_NR_GPIOS	64
+#include <asm-generic/gpio.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+extern unsigned long ar71xx_gpio_count;
+extern void __ar71xx_gpio_set_value(unsigned gpio, int value);
+extern int __ar71xx_gpio_get_value(unsigned gpio);
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return AR71XX_GPIO_IRQ(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - AR71XX_GPIO_IRQ_BASE;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (gpio < ar71xx_gpio_count)
+		return __ar71xx_gpio_get_value(gpio);
+
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (gpio < ar71xx_gpio_count)
+		__ar71xx_gpio_set_value(gpio, value);
+	else
+		__gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep	__gpio_cansleep
+
+#endif /* __ASM_MACH_AR71XX_GPIO_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/irq.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/irq.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/irq.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/irq.h	2010-10-14 20:27:58.994356523 +0200
@@ -0,0 +1,17 @@
+/*
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+#ifndef __ASM_MACH_AR71XX_IRQ_H
+#define __ASM_MACH_AR71XX_IRQ_H
+
+#define MIPS_CPU_IRQ_BASE	0
+#define NR_IRQS			56
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_AR71XX_IRQ_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h	2010-10-14 20:27:59.045181409 +0200
@@ -0,0 +1,32 @@
+/*
+ *  Atheros AR71xx specific kernel entry setup
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_MACH_AR71XX_KERNEL_ENTRY_H
+#define __ASM_MACH_AR71XX_KERNEL_ENTRY_H
+
+	/*
+	 * Some bootloaders set the 'Kseg0 coherency algorithm' to
+	 * 'Cacheable, noncoherent, write-through, no write allocate'
+	 * and this cause performance issues. Let's go and change it to
+	 * 'Cacheable, noncoherent, write-back, write allocate'
+	 */
+	.macro	kernel_entry_setup
+	mfc0	t0, CP0_CONFIG
+	li	t1, ~CONF_CM_CMASK
+	and	t0, t1
+	ori	t0, CONF_CM_CACHABLE_NONCOHERENT
+	mtc0	t0, CP0_CONFIG
+	nop
+	.endm
+
+	.macro	smp_slave_setup
+	.endm
+
+#endif /* __ASM_MACH_AR71XX_KERNEL_ENTRY_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/mach-rb750.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/mach-rb750.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/mach-rb750.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/mach-rb750.h	2010-10-14 20:27:59.095024740 +0200
@@ -0,0 +1,66 @@
+/*
+ *  MikroTik RouterBOARD 750 definitions
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+#ifndef _MACH_RB750_H
+#define _MACH_RB750_H
+
+#include <linux/bitops.h>
+
+#define RB750_GPIO_LVC573_LE	0	/* Latch enable on LVC573 */
+#define RB750_GPIO_NAND_IO0	1	/* NAND I/O 0 */
+#define RB750_GPIO_NAND_IO1	2	/* NAND I/O 1 */
+#define RB750_GPIO_NAND_IO2	3	/* NAND I/O 2 */
+#define RB750_GPIO_NAND_IO3	4	/* NAND I/O 3 */
+#define RB750_GPIO_NAND_IO4	5	/* NAND I/O 4 */
+#define RB750_GPIO_NAND_IO5	6	/* NAND I/O 5 */
+#define RB750_GPIO_NAND_IO6	7	/* NAND I/O 6 */
+#define RB750_GPIO_NAND_IO7	8	/* NAND I/O 7 */
+#define RB750_GPIO_NAND_NCE	11	/* NAND Chip Enable (active low) */
+#define RB750_GPIO_NAND_RDY	12	/* NAND Ready */
+#define RB750_GPIO_NAND_CLE	14	/* NAND Command Latch Enable */
+#define RB750_GPIO_NAND_ALE	15	/* NAND Address Latch Enable */
+#define RB750_GPIO_NAND_NRE	16	/* NAND Read Enable (active low) */
+#define RB750_GPIO_NAND_NWE	17	/* NAND Write Enable (active low) */
+
+#define RB750_GPIO_BTN_RESET	1
+#define RB750_GPIO_SPI_CS0	2
+#define RB750_GPIO_LED_ACT	12
+#define RB750_GPIO_LED_PORT1	13
+#define RB750_GPIO_LED_PORT2	14
+#define RB750_GPIO_LED_PORT3	15
+#define RB750_GPIO_LED_PORT4	16
+#define RB750_GPIO_LED_PORT5	17
+
+#define RB750_LED_ACT		BIT(RB750_GPIO_LED_ACT)
+#define RB750_LED_PORT1		BIT(RB750_GPIO_LED_PORT1)
+#define RB750_LED_PORT2		BIT(RB750_GPIO_LED_PORT2)
+#define RB750_LED_PORT3		BIT(RB750_GPIO_LED_PORT3)
+#define RB750_LED_PORT4		BIT(RB750_GPIO_LED_PORT4)
+#define RB750_LED_PORT5		BIT(RB750_GPIO_LED_PORT5)
+
+#define RB750_LVC573_LE		BIT(RB750_GPIO_LVC573_LE)
+
+#define RB750_LED_BITS	(RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
+			 RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
+
+struct rb750_led_data {
+	char	*name;
+	char	*default_trigger;
+	u32	mask;
+	int	active_low;
+};
+
+struct rb750_led_platform_data {
+	int			num_leds;
+	struct rb750_led_data	*leds;
+};
+
+int rb750_latch_change(u32 mask_clr, u32 mask_set);
+
+#endif /* _MACH_RB750_H */
\ No newline at end of file
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/mangle-port.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/mangle-port.h	2010-10-14 20:27:59.144833241 +0200
@@ -0,0 +1,45 @@
+/*
+ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
+ * 	Copyright (C) 2003, 2004 Ralf Baechle
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_AR71XX_MANGLE_PORT_H
+#define __ASM_MACH_AR71XX_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	((port) ^ 3)
+#define __swizzle_addr_w(port)	((port) ^ 2)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+#if defined(CONFIG_SWAP_IO_SPACE)
+
+# define ioswabb(a, x)           (x)
+# define __mem_ioswabb(a, x)     (x)
+# define ioswabw(a, x)           le16_to_cpu(x)
+# define __mem_ioswabw(a, x)     (x)
+# define ioswabl(a, x)           le32_to_cpu(x)
+# define __mem_ioswabl(a, x)     (x)
+# define ioswabq(a, x)           le64_to_cpu(x)
+# define __mem_ioswabq(a, x)     (x)
+
+#else
+
+# define ioswabb(a, x)           (x)
+# define __mem_ioswabb(a, x)     (x)
+# define ioswabw(a, x)           (x)
+# define __mem_ioswabw(a, x)     cpu_to_le16(x)
+# define ioswabl(a, x)           (x)
+# define __mem_ioswabl(a, x)     cpu_to_le32(x)
+# define ioswabq(a, x)           (x)
+# define __mem_ioswabq(a, x)     cpu_to_le64(x)
+
+#endif
+
+#endif /* __ASM_MACH_AR71XX_MANGLE_PORT_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/pci.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/pci.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/pci.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/pci.h	2010-10-14 20:27:59.194642423 +0200
@@ -0,0 +1,39 @@
+/*
+ *  Atheros AR71xx SoC specific PCI definitions
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_AR71XX_PCI_H
+#define __ASM_MACH_AR71XX_PCI_H
+
+struct pci_dev;
+
+struct ar71xx_pci_irq {
+	int	irq;
+	u8	slot;
+	u8	pin;
+};
+
+extern int (*ar71xx_pci_plat_dev_init)(struct pci_dev *dev);
+extern unsigned ar71xx_pci_nr_irqs __initdata;
+extern struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata;
+
+int ar71xx_pcibios_map_irq(const struct pci_dev *dev,
+			   uint8_t slot, uint8_t pin) __init;
+int ar71xx_pcibios_init(void) __init;
+
+int ar71xx_pci_be_handler(int is_fixup);
+
+int ar724x_pcibios_map_irq(const struct pci_dev *dev,
+			   uint8_t slot, uint8_t pin) __init;
+int ar724x_pcibios_init(void) __init;
+
+int ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map) __init;
+
+#endif /* __ASM_MACH_AR71XX_PCI_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/platform.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/platform.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/platform.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/platform.h	2010-10-14 20:27:59.252778691 +0200
@@ -0,0 +1,61 @@
+/*
+ *  Atheros AR71xx SoC specific platform data definitions
+ *
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_AR71XX_PLATFORM_H
+#define __ASM_MACH_AR71XX_PLATFORM_H
+
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/phy.h>
+#include <linux/spi/spi.h>
+
+struct ag71xx_platform_data {
+	phy_interface_t	phy_if_mode;
+	u32		phy_mask;
+	int		speed;
+	int		duplex;
+	u32		reset_bit;
+	u32		mii_if;
+	u8		mac_addr[ETH_ALEN];
+	struct device	*mii_bus_dev;
+
+	u8		has_gbit:1;
+	u8		is_ar91xx:1;
+	u8		is_ar724x:1;
+	u8		has_ar8216:1;
+
+	void		(* ddr_flush)(void);
+	void		(* set_pll)(int speed);
+
+	u32		fifo_cfg1;
+	u32		fifo_cfg2;
+	u32		fifo_cfg3;
+};
+
+struct ag71xx_mdio_platform_data {
+	u32		phy_mask;
+	int		is_ar7240;
+};
+
+struct ar71xx_ehci_platform_data {
+	u8		is_ar91xx;
+};
+
+struct ar71xx_spi_platform_data {
+	unsigned	bus_num;
+	unsigned	num_chipselect;
+	u32		(*get_ioc_base)(u8 chip_select, int cs_high, int is_on);
+};
+
+#define AR71XX_SPI_CS_INACTIVE	0
+#define AR71XX_SPI_CS_ACTIVE	1
+
+#endif /* __ASM_MACH_AR71XX_PLATFORM_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/war.h linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/war.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mach-ar71xx/war.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mach-ar71xx/war.h	2010-10-14 20:27:59.295939760 +0200
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_AR71XX_WAR_H
+#define __ASM_MACH_AR71XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MACH_AR71XX_WAR_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/mips_machine.h linux-2.6.35.7/arch/mips/include/asm/mips_machine.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/mips_machine.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/include/asm/mips_machine.h	2010-10-14 20:27:59.335601098 +0200
@@ -0,0 +1,54 @@
+/*
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_MIPS_MACHINE_H
+#define __ASM_MIPS_MACHINE_H
+
+#include <linux/init.h>
+#include <linux/list.h>
+
+#include <asm/bootinfo.h>
+
+struct mips_machine {
+	unsigned long		mach_type;
+	char			*mach_id;
+	char			*mach_name;
+	void			(*mach_setup)(void);
+	struct list_head	list;
+};
+
+void mips_machine_register(struct mips_machine *) __init;
+void mips_machine_setup(void) __init;
+int  mips_machtype_setup(char *id) __init;
+void mips_machine_set_name(char *name) __init;
+
+extern char *mips_machine_name;
+
+#define MIPS_MACHINE(_type, _id, _name, _setup) 		\
+static const char machine_name_##_type[] __initconst		\
+			__aligned(1) = _name;			\
+static const char machine_id_##_type[] __initconst		\
+			__aligned(1) = _id;			\
+static struct mips_machine machine_##_type __initdata =		\
+{								\
+	.mach_type	= _type,				\
+	.mach_id	= (char *) machine_id_##_type,		\
+	.mach_name	= (char *) machine_name_##_type,	\
+	.mach_setup	= _setup,				\
+};								\
+								\
+static int __init register_machine_##_type(void)		\
+{								\
+	mips_machine_register(&machine_##_type);		\
+	return 0;						\
+}								\
+								\
+pure_initcall(register_machine_##_type)
+
+#endif /* __ASM_MIPS_MACHINE_H */
diff -Nur linux-2.6.35.7.orig/arch/mips/include/asm/time.h linux-2.6.35.7/arch/mips/include/asm/time.h
--- linux-2.6.35.7.orig/arch/mips/include/asm/time.h	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/arch/mips/include/asm/time.h	2010-10-14 20:27:59.385601208 +0200
@@ -52,6 +52,7 @@
  */
 #ifdef CONFIG_CEVT_R4K_LIB
 extern unsigned int __weak get_c0_compare_int(void);
+extern unsigned int __weak get_c0_compare_irq(void);
 extern int r4k_clockevent_init(void);
 #endif
 
diff -Nur linux-2.6.35.7.orig/arch/mips/Kconfig linux-2.6.35.7/arch/mips/Kconfig
--- linux-2.6.35.7.orig/arch/mips/Kconfig	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/arch/mips/Kconfig	2010-10-14 20:27:59.436851139 +0200
@@ -48,6 +48,23 @@
 	  Support for the Texas Instruments AR7 System-on-a-Chip
 	  family: TNETD7100, 7200 and 7300.
 
+config ATHEROS_AR71XX
+	bool "Atheros AR71xx based boards"
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select IRQ_CPU
+	select ARCH_REQUIRE_GPIOLIB
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
+	select MIPS_MACHINE
+	help
+	  Support for Atheros AR71xx based boards.
+
 config BCM47XX
 	bool "Broadcom BCM47XX based boards"
 	select CEVT_R4K
@@ -684,6 +701,7 @@
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
+source "arch/mips/ar71xx/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
@@ -850,9 +868,15 @@
 config MIPS_DISABLE_OBSOLETE_IDE
 	bool
 
+config MYLOADER
+	bool
+
 config SYNC_R4K
 	bool
 
+config MIPS_MACHINE
+	def_bool n
+
 config NO_IOPORT
 	def_bool n
 
diff -Nur linux-2.6.35.7.orig/arch/mips/kernel/Makefile linux-2.6.35.7/arch/mips/kernel/Makefile
--- linux-2.6.35.7.orig/arch/mips/kernel/Makefile	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/arch/mips/kernel/Makefile	2010-10-14 20:27:59.485313916 +0200
@@ -93,6 +93,7 @@
 
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
 obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
 
 CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
diff -Nur linux-2.6.35.7.orig/arch/mips/kernel/mips_machine.c linux-2.6.35.7/arch/mips/kernel/mips_machine.c
--- linux-2.6.35.7.orig/arch/mips/kernel/mips_machine.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/kernel/mips_machine.c	2010-10-14 20:27:59.536722433 +0200
@@ -0,0 +1,121 @@
+/*
+ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <asm/mips_machine.h>
+
+static struct list_head mips_machines __initdata =
+		LIST_HEAD_INIT(mips_machines);
+static char *mips_machid __initdata;
+
+char *mips_machine_name = "Unknown";
+
+static struct mips_machine * __init mips_machine_find(unsigned long machtype)
+{
+	struct list_head *this;
+
+	list_for_each(this, &mips_machines) {
+		struct mips_machine *mach;
+
+		mach = list_entry(this, struct mips_machine, list);
+		if (mach->mach_type == machtype)
+			return mach;
+	}
+
+	return NULL;
+}
+
+void __init mips_machine_register(struct mips_machine *mach)
+{
+	list_add_tail(&mach->list, &mips_machines);
+}
+
+void __init mips_machine_set_name(char *name)
+{
+	unsigned int len;
+	char *p;
+
+	if (name == NULL)
+		return;
+
+	len = strlen(name);
+	p = kmalloc(len + 1, GFP_KERNEL);
+	if (p) {
+		strncpy(p, name, len);
+		p[len] = '\0';
+		mips_machine_name = p;
+	} else {
+		printk(KERN_WARNING "MIPS: no memory for machine_name\n");
+	}
+}
+
+void __init mips_machine_setup(void)
+{
+	struct mips_machine *mach;
+
+	mach = mips_machine_find(mips_machtype);
+	if (!mach) {
+		printk(KERN_WARNING "MIPS: no machine registered for "
+			"machtype %lu\n", mips_machtype);
+		return;
+	}
+
+	mips_machine_set_name(mach->mach_name);
+	printk(KERN_NOTICE "MIPS: machine is %s\n", mips_machine_name);
+
+	if (mach->mach_setup)
+		mach->mach_setup();
+}
+
+int __init mips_machtype_setup(char *id)
+{
+	if (mips_machid == NULL)
+		mips_machid = id;
+
+	return 1;
+}
+
+__setup("machtype=", mips_machtype_setup);
+
+static int __init mips_machtype_init(void)
+{
+	struct list_head *this;
+	struct mips_machine *mach;
+
+	if (mips_machid == NULL)
+		return 0;
+
+	list_for_each(this, &mips_machines) {
+		mach = list_entry(this, struct mips_machine, list);
+		if (mach->mach_id == NULL)
+			continue;
+
+		if (strcmp(mach->mach_id, mips_machid) == 0) {
+			mips_machtype = mach->mach_type;
+			return 0;
+		}
+	}
+
+	printk(KERN_WARNING
+	       "MIPS: no machine found for id: '%s', registered machines:\n",
+	       mips_machid);
+	printk(KERN_WARNING "%32s %s\n", "id", "name");
+
+	list_for_each(this, &mips_machines) {
+		mach = list_entry(this, struct mips_machine, list);
+		printk(KERN_WARNING "%32s %s\n",
+		       mach->mach_id ? mach->mach_id : "", mach->mach_name);
+	}
+
+	return 0;
+}
+
+core_initcall(mips_machtype_init);
diff -Nur linux-2.6.35.7.orig/arch/mips/kernel/proc.c linux-2.6.35.7/arch/mips/kernel/proc.c
--- linux-2.6.35.7.orig/arch/mips/kernel/proc.c	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/arch/mips/kernel/proc.c	2010-10-14 20:27:59.578101125 +0200
@@ -12,6 +12,7 @@
 #include <asm/cpu-features.h>
 #include <asm/mipsregs.h>
 #include <asm/processor.h>
+#include <asm/mips_machine.h>
 
 unsigned int vced_count, vcei_count;
 
@@ -31,8 +32,12 @@
 	/*
 	 * For the first processor also print the system type
 	 */
-	if (n == 0)
+	if (n == 0) {
 		seq_printf(m, "system type\t\t: %s\n", get_system_type());
+#ifdef CONFIG_MIPS_MACHINE
+		seq_printf(m, "machine\t\t\t: %s\n", mips_machine_name);
+#endif
+	}
 
 	seq_printf(m, "processor\t\t: %ld\n", n);
 	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
diff -Nur linux-2.6.35.7.orig/arch/mips/kernel/traps.c linux-2.6.35.7/arch/mips/kernel/traps.c
--- linux-2.6.35.7.orig/arch/mips/kernel/traps.c	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/arch/mips/kernel/traps.c	2010-10-14 20:27:59.634370215 +0200
@@ -51,6 +51,7 @@
 #include <asm/types.h>
 #include <asm/stacktrace.h>
 #include <asm/irq.h>
+#include <asm/time.h>
 #include <asm/uasm.h>
 
 extern void check_wait(void);
@@ -1519,6 +1520,8 @@
 	if (cpu_has_mips_r2) {
 		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
 		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
+		if (get_c0_compare_irq)
+			cp0_compare_irq = get_c0_compare_irq();
 		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
 		if (cp0_perfcount_irq == cp0_compare_irq)
 			cp0_perfcount_irq = -1;
diff -Nur linux-2.6.35.7.orig/arch/mips/kernel/traps.c.orig linux-2.6.35.7/arch/mips/kernel/traps.c.orig
--- linux-2.6.35.7.orig/arch/mips/kernel/traps.c.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/kernel/traps.c.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,1738 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 01, 06 Ralf Baechle
+ * Copyright (C) 1995, 1996 Paul M. Antoine
+ * Copyright (C) 1998 Ulf Carlsson
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 01 MIPS Technologies, Inc.
+ * Copyright (C) 2002, 2003, 2004, 2005, 2007  Maciej W. Rozycki
+ */
+#include <linux/bug.h>
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/kallsyms.h>
+#include <linux/bootmem.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
+#include <linux/kdb.h>
+
+#include <asm/bootinfo.h>
+#include <asm/branch.h>
+#include <asm/break.h>
+#include <asm/cop2.h>
+#include <asm/cpu.h>
+#include <asm/dsp.h>
+#include <asm/fpu.h>
+#include <asm/fpu_emulator.h>
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/module.h>
+#include <asm/pgtable.h>
+#include <asm/ptrace.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/tlbdebug.h>
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+#include <asm/watch.h>
+#include <asm/mmu_context.h>
+#include <asm/types.h>
+#include <asm/stacktrace.h>
+#include <asm/irq.h>
+#include <asm/uasm.h>
+
+extern void check_wait(void);
+extern asmlinkage void r4k_wait(void);
+extern asmlinkage void rollback_handle_int(void);
+extern asmlinkage void handle_int(void);
+extern asmlinkage void handle_tlbm(void);
+extern asmlinkage void handle_tlbl(void);
+extern asmlinkage void handle_tlbs(void);
+extern asmlinkage void handle_adel(void);
+extern asmlinkage void handle_ades(void);
+extern asmlinkage void handle_ibe(void);
+extern asmlinkage void handle_dbe(void);
+extern asmlinkage void handle_sys(void);
+extern asmlinkage void handle_bp(void);
+extern asmlinkage void handle_ri(void);
+extern asmlinkage void handle_ri_rdhwr_vivt(void);
+extern asmlinkage void handle_ri_rdhwr(void);
+extern asmlinkage void handle_cpu(void);
+extern asmlinkage void handle_ov(void);
+extern asmlinkage void handle_tr(void);
+extern asmlinkage void handle_fpe(void);
+extern asmlinkage void handle_mdmx(void);
+extern asmlinkage void handle_watch(void);
+extern asmlinkage void handle_mt(void);
+extern asmlinkage void handle_dsp(void);
+extern asmlinkage void handle_mcheck(void);
+extern asmlinkage void handle_reserved(void);
+
+extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
+	struct mips_fpu_struct *ctx, int has_fpu);
+
+void (*board_be_init)(void);
+int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
+void (*board_nmi_handler_setup)(void);
+void (*board_ejtag_handler_setup)(void);
+void (*board_bind_eic_interrupt)(int irq, int regset);
+
+
+static void show_raw_backtrace(unsigned long reg29)
+{
+	unsigned long *sp = (unsigned long *)(reg29 & ~3);
+	unsigned long addr;
+
+	printk("Call Trace:");
+#ifdef CONFIG_KALLSYMS
+	printk("\n");
+#endif
+	while (!kstack_end(sp)) {
+		unsigned long __user *p =
+			(unsigned long __user *)(unsigned long)sp++;
+		if (__get_user(addr, p)) {
+			printk(" (Bad stack address)");
+			break;
+		}
+		if (__kernel_text_address(addr))
+			print_ip_sym(addr);
+	}
+	printk("\n");
+}
+
+#ifdef CONFIG_KALLSYMS
+int raw_show_trace;
+static int __init set_raw_show_trace(char *str)
+{
+	raw_show_trace = 1;
+	return 1;
+}
+__setup("raw_show_trace", set_raw_show_trace);
+#endif
+
+static void show_backtrace(struct task_struct *task, const struct pt_regs *regs)
+{
+	unsigned long sp = regs->regs[29];
+	unsigned long ra = regs->regs[31];
+	unsigned long pc = regs->cp0_epc;
+
+	if (raw_show_trace || !__kernel_text_address(pc)) {
+		show_raw_backtrace(sp);
+		return;
+	}
+	printk("Call Trace:\n");
+	do {
+		print_ip_sym(pc);
+		pc = unwind_stack(task, &sp, pc, &ra);
+	} while (pc);
+	printk("\n");
+}
+
+/*
+ * This routine abuses get_user()/put_user() to reference pointers
+ * with at least a bit of error checking ...
+ */
+static void show_stacktrace(struct task_struct *task,
+	const struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	long stackdata;
+	int i;
+	unsigned long __user *sp = (unsigned long __user *)regs->regs[29];
+
+	printk("Stack :");
+	i = 0;
+	while ((unsigned long) sp & (PAGE_SIZE - 1)) {
+		if (i && ((i % (64 / field)) == 0))
+			printk("\n       ");
+		if (i > 39) {
+			printk(" ...");
+			break;
+		}
+
+		if (__get_user(stackdata, sp++)) {
+			printk(" (Bad stack address)");
+			break;
+		}
+
+		printk(" %0*lx", field, stackdata);
+		i++;
+	}
+	printk("\n");
+	show_backtrace(task, regs);
+}
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+	struct pt_regs regs;
+	if (sp) {
+		regs.regs[29] = (unsigned long)sp;
+		regs.regs[31] = 0;
+		regs.cp0_epc = 0;
+	} else {
+		if (task && task != current) {
+			regs.regs[29] = task->thread.reg29;
+			regs.regs[31] = 0;
+			regs.cp0_epc = task->thread.reg31;
+#ifdef CONFIG_KGDB_KDB
+		} else if (atomic_read(&kgdb_active) != -1 &&
+			   kdb_current_regs) {
+			memcpy(&regs, kdb_current_regs, sizeof(regs));
+#endif /* CONFIG_KGDB_KDB */
+		} else {
+			prepare_frametrace(&regs);
+		}
+	}
+	show_stacktrace(task, &regs);
+}
+
+/*
+ * The architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+	struct pt_regs regs;
+
+	prepare_frametrace(&regs);
+	show_backtrace(current, &regs);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+static void show_code(unsigned int __user *pc)
+{
+	long i;
+	unsigned short __user *pc16 = NULL;
+
+	printk("\nCode:");
+
+	if ((unsigned long)pc & 1)
+		pc16 = (unsigned short __user *)((unsigned long)pc & ~1);
+	for(i = -3 ; i < 6 ; i++) {
+		unsigned int insn;
+		if (pc16 ? __get_user(insn, pc16 + i) : __get_user(insn, pc + i)) {
+			printk(" (Bad address in epc)\n");
+			break;
+		}
+		printk("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>'));
+	}
+}
+
+static void __show_regs(const struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	unsigned int cause = regs->cp0_cause;
+	int i;
+
+	printk("Cpu %d\n", smp_processor_id());
+
+	/*
+	 * Saved main processor registers
+	 */
+	for (i = 0; i < 32; ) {
+		if ((i % 4) == 0)
+			printk("$%2d   :", i);
+		if (i == 0)
+			printk(" %0*lx", field, 0UL);
+		else if (i == 26 || i == 27)
+			printk(" %*s", field, "");
+		else
+			printk(" %0*lx", field, regs->regs[i]);
+
+		i++;
+		if ((i % 4) == 0)
+			printk("\n");
+	}
+
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	printk("Acx    : %0*lx\n", field, regs->acx);
+#endif
+	printk("Hi    : %0*lx\n", field, regs->hi);
+	printk("Lo    : %0*lx\n", field, regs->lo);
+
+	/*
+	 * Saved cp0 registers
+	 */
+	printk("epc   : %0*lx %pS\n", field, regs->cp0_epc,
+	       (void *) regs->cp0_epc);
+	printk("    %s\n", print_tainted());
+	printk("ra    : %0*lx %pS\n", field, regs->regs[31],
+	       (void *) regs->regs[31]);
+
+	printk("Status: %08x    ", (uint32_t) regs->cp0_status);
+
+	if (current_cpu_data.isa_level == MIPS_CPU_ISA_I) {
+		if (regs->cp0_status & ST0_KUO)
+			printk("KUo ");
+		if (regs->cp0_status & ST0_IEO)
+			printk("IEo ");
+		if (regs->cp0_status & ST0_KUP)
+			printk("KUp ");
+		if (regs->cp0_status & ST0_IEP)
+			printk("IEp ");
+		if (regs->cp0_status & ST0_KUC)
+			printk("KUc ");
+		if (regs->cp0_status & ST0_IEC)
+			printk("IEc ");
+	} else {
+		if (regs->cp0_status & ST0_KX)
+			printk("KX ");
+		if (regs->cp0_status & ST0_SX)
+			printk("SX ");
+		if (regs->cp0_status & ST0_UX)
+			printk("UX ");
+		switch (regs->cp0_status & ST0_KSU) {
+		case KSU_USER:
+			printk("USER ");
+			break;
+		case KSU_SUPERVISOR:
+			printk("SUPERVISOR ");
+			break;
+		case KSU_KERNEL:
+			printk("KERNEL ");
+			break;
+		default:
+			printk("BAD_MODE ");
+			break;
+		}
+		if (regs->cp0_status & ST0_ERL)
+			printk("ERL ");
+		if (regs->cp0_status & ST0_EXL)
+			printk("EXL ");
+		if (regs->cp0_status & ST0_IE)
+			printk("IE ");
+	}
+	printk("\n");
+
+	printk("Cause : %08x\n", cause);
+
+	cause = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE;
+	if (1 <= cause && cause <= 5)
+		printk("BadVA : %0*lx\n", field, regs->cp0_badvaddr);
+
+	printk("PrId  : %08x (%s)\n", read_c0_prid(),
+	       cpu_name_string());
+}
+
+/*
+ * FIXME: really the generic show_regs should take a const pointer argument.
+ */
+void show_regs(struct pt_regs *regs)
+{
+	__show_regs((struct pt_regs *)regs);
+}
+
+void show_registers(const struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+
+	__show_regs(regs);
+	print_modules();
+	printk("Process %s (pid: %d, threadinfo=%p, task=%p, tls=%0*lx)\n",
+	       current->comm, current->pid, current_thread_info(), current,
+	      field, current_thread_info()->tp_value);
+	if (cpu_has_userlocal) {
+		unsigned long tls;
+
+		tls = read_c0_userlocal();
+		if (tls != current_thread_info()->tp_value)
+			printk("*HwTLS: %0*lx\n", field, tls);
+	}
+
+	show_stacktrace(current, regs);
+	show_code((unsigned int __user *) regs->cp0_epc);
+	printk("\n");
+}
+
+static DEFINE_SPINLOCK(die_lock);
+
+void __noreturn die(const char * str, struct pt_regs * regs)
+{
+	static int die_counter;
+	int sig = SIGSEGV;
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long dvpret = dvpe();
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	notify_die(DIE_OOPS, str, (struct pt_regs *)regs, SIGSEGV, 0, 0);
+
+	console_verbose();
+	spin_lock_irq(&die_lock);
+	bust_spinlocks(1);
+#ifdef CONFIG_MIPS_MT_SMTC
+	mips_mt_regdump(dvpret);
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+		sig = 0;
+
+	printk("%s[#%d]:\n", str, ++die_counter);
+	show_registers(regs);
+	add_taint(TAINT_DIE);
+	spin_unlock_irq(&die_lock);
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+
+	if (panic_on_oops) {
+		printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
+		ssleep(5);
+		panic("Fatal exception");
+	}
+
+	do_exit(sig);
+}
+
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
+
+__asm__(
+"	.section	__dbe_table, \"a\"\n"
+"	.previous			\n");
+
+/* Given an address, look for it in the exception tables. */
+static const struct exception_table_entry *search_dbe_tables(unsigned long addr)
+{
+	const struct exception_table_entry *e;
+
+	e = search_extable(__start___dbe_table, __stop___dbe_table - 1, addr);
+	if (!e)
+		e = search_module_dbetables(addr);
+	return e;
+}
+
+asmlinkage void do_be(struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	const struct exception_table_entry *fixup = NULL;
+	int data = regs->cp0_cause & 4;
+	int action = MIPS_BE_FATAL;
+
+	/* XXX For now.  Fixme, this searches the wrong table ...  */
+	if (data && !user_mode(regs))
+		fixup = search_dbe_tables(exception_epc(regs));
+
+	if (fixup)
+		action = MIPS_BE_FIXUP;
+
+	if (board_be_handler)
+		action = board_be_handler(regs, fixup != NULL);
+
+	switch (action) {
+	case MIPS_BE_DISCARD:
+		return;
+	case MIPS_BE_FIXUP:
+		if (fixup) {
+			regs->cp0_epc = fixup->nextinsn;
+			return;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * Assume it would be too dangerous to continue ...
+	 */
+	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
+	       data ? "Data" : "Instruction",
+	       field, regs->cp0_epc, field, regs->regs[31]);
+	if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
+	die_if_kernel("Oops", regs);
+	force_sig(SIGBUS, current);
+}
+
+/*
+ * ll/sc, rdhwr, sync emulation
+ */
+
+#define OPCODE 0xfc000000
+#define BASE   0x03e00000
+#define RT     0x001f0000
+#define OFFSET 0x0000ffff
+#define LL     0xc0000000
+#define SC     0xe0000000
+#define SPEC0  0x00000000
+#define SPEC3  0x7c000000
+#define RD     0x0000f800
+#define FUNC   0x0000003f
+#define SYNC   0x0000000f
+#define RDHWR  0x0000003b
+
+/*
+ * The ll_bit is cleared by r*_switch.S
+ */
+
+unsigned int ll_bit;
+struct task_struct *ll_task;
+
+static inline int simulate_ll(struct pt_regs *regs, unsigned int opcode)
+{
+	unsigned long value, __user *vaddr;
+	long offset;
+
+	/*
+	 * analyse the ll instruction that just caused a ri exception
+	 * and put the referenced address to addr.
+	 */
+
+	/* sign extend offset */
+	offset = opcode & OFFSET;
+	offset <<= 16;
+	offset >>= 16;
+
+	vaddr = (unsigned long __user *)
+	        ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+
+	if ((unsigned long)vaddr & 3)
+		return SIGBUS;
+	if (get_user(value, vaddr))
+		return SIGSEGV;
+
+	preempt_disable();
+
+	if (ll_task == NULL || ll_task == current) {
+		ll_bit = 1;
+	} else {
+		ll_bit = 0;
+	}
+	ll_task = current;
+
+	preempt_enable();
+
+	regs->regs[(opcode & RT) >> 16] = value;
+
+	return 0;
+}
+
+static inline int simulate_sc(struct pt_regs *regs, unsigned int opcode)
+{
+	unsigned long __user *vaddr;
+	unsigned long reg;
+	long offset;
+
+	/*
+	 * analyse the sc instruction that just caused a ri exception
+	 * and put the referenced address to addr.
+	 */
+
+	/* sign extend offset */
+	offset = opcode & OFFSET;
+	offset <<= 16;
+	offset >>= 16;
+
+	vaddr = (unsigned long __user *)
+	        ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset);
+	reg = (opcode & RT) >> 16;
+
+	if ((unsigned long)vaddr & 3)
+		return SIGBUS;
+
+	preempt_disable();
+
+	if (ll_bit == 0 || ll_task != current) {
+		regs->regs[reg] = 0;
+		preempt_enable();
+		return 0;
+	}
+
+	preempt_enable();
+
+	if (put_user(regs->regs[reg], vaddr))
+		return SIGSEGV;
+
+	regs->regs[reg] = 1;
+
+	return 0;
+}
+
+/*
+ * ll uses the opcode of lwc0 and sc uses the opcode of swc0.  That is both
+ * opcodes are supposed to result in coprocessor unusable exceptions if
+ * executed on ll/sc-less processors.  That's the theory.  In practice a
+ * few processors such as NEC's VR4100 throw reserved instruction exceptions
+ * instead, so we're doing the emulation thing in both exception handlers.
+ */
+static int simulate_llsc(struct pt_regs *regs, unsigned int opcode)
+{
+	if ((opcode & OPCODE) == LL)
+		return simulate_ll(regs, opcode);
+	if ((opcode & OPCODE) == SC)
+		return simulate_sc(regs, opcode);
+
+	return -1;			/* Must be something else ... */
+}
+
+/*
+ * Simulate trapping 'rdhwr' instructions to provide user accessible
+ * registers not implemented in hardware.
+ */
+static int simulate_rdhwr(struct pt_regs *regs, unsigned int opcode)
+{
+	struct thread_info *ti = task_thread_info(current);
+
+	if ((opcode & OPCODE) == SPEC3 && (opcode & FUNC) == RDHWR) {
+		int rd = (opcode & RD) >> 11;
+		int rt = (opcode & RT) >> 16;
+		switch (rd) {
+		case 0:		/* CPU number */
+			regs->regs[rt] = smp_processor_id();
+			return 0;
+		case 1:		/* SYNCI length */
+			regs->regs[rt] = min(current_cpu_data.dcache.linesz,
+					     current_cpu_data.icache.linesz);
+			return 0;
+		case 2:		/* Read count register */
+			regs->regs[rt] = read_c0_count();
+			return 0;
+		case 3:		/* Count register resolution */
+			switch (current_cpu_data.cputype) {
+			case CPU_20KC:
+			case CPU_25KF:
+				regs->regs[rt] = 1;
+				break;
+			default:
+				regs->regs[rt] = 2;
+			}
+			return 0;
+		case 29:
+			regs->regs[rt] = ti->tp_value;
+			return 0;
+		default:
+			return -1;
+		}
+	}
+
+	/* Not ours.  */
+	return -1;
+}
+
+static int simulate_sync(struct pt_regs *regs, unsigned int opcode)
+{
+	if ((opcode & OPCODE) == SPEC0 && (opcode & FUNC) == SYNC)
+		return 0;
+
+	return -1;			/* Must be something else ... */
+}
+
+asmlinkage void do_ov(struct pt_regs *regs)
+{
+	siginfo_t info;
+
+	die_if_kernel("Integer overflow", regs);
+
+	info.si_code = FPE_INTOVF;
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_addr = (void __user *) regs->cp0_epc;
+	force_sig_info(SIGFPE, &info, current);
+}
+
+/*
+ * XXX Delayed fp exceptions when doing a lazy ctx switch XXX
+ */
+asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
+{
+	siginfo_t info;
+
+	if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+	die_if_kernel("FP exception in kernel code", regs);
+
+	if (fcr31 & FPU_CSR_UNI_X) {
+		int sig;
+
+		/*
+		 * Unimplemented operation exception.  If we've got the full
+		 * software emulator on-board, let's use it...
+		 *
+		 * Force FPU to dump state into task/thread context.  We're
+		 * moving a lot of data here for what is probably a single
+		 * instruction, but the alternative is to pre-decode the FP
+		 * register operands before invoking the emulator, which seems
+		 * a bit extreme for what should be an infrequent event.
+		 */
+		/* Ensure 'resume' not overwrite saved fp context again. */
+		lose_fpu(1);
+
+		/* Run the emulator */
+		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1);
+
+		/*
+		 * We can't allow the emulated instruction to leave any of
+		 * the cause bit set in $fcr31.
+		 */
+		current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+
+		/* Restore the hardware register state */
+		own_fpu(1);	/* Using the FPU again.  */
+
+		/* If something went wrong, signal */
+		if (sig)
+			force_sig(sig, current);
+
+		return;
+	} else if (fcr31 & FPU_CSR_INV_X)
+		info.si_code = FPE_FLTINV;
+	else if (fcr31 & FPU_CSR_DIV_X)
+		info.si_code = FPE_FLTDIV;
+	else if (fcr31 & FPU_CSR_OVF_X)
+		info.si_code = FPE_FLTOVF;
+	else if (fcr31 & FPU_CSR_UDF_X)
+		info.si_code = FPE_FLTUND;
+	else if (fcr31 & FPU_CSR_INE_X)
+		info.si_code = FPE_FLTRES;
+	else
+		info.si_code = __SI_FAULT;
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_addr = (void __user *) regs->cp0_epc;
+	force_sig_info(SIGFPE, &info, current);
+}
+
+static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
+	const char *str)
+{
+	siginfo_t info;
+	char b[40];
+
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+	if (kgdb_ll_trap(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
+
+	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+
+	/*
+	 * A short test says that IRIX 5.3 sends SIGTRAP for all trap
+	 * insns, even for trap and break codes that indicate arithmetic
+	 * failures.  Weird ...
+	 * But should we continue the brokenness???  --macro
+	 */
+	switch (code) {
+	case BRK_OVERFLOW:
+	case BRK_DIVZERO:
+		scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
+		die_if_kernel(b, regs);
+		if (code == BRK_DIVZERO)
+			info.si_code = FPE_INTDIV;
+		else
+			info.si_code = FPE_INTOVF;
+		info.si_signo = SIGFPE;
+		info.si_errno = 0;
+		info.si_addr = (void __user *) regs->cp0_epc;
+		force_sig_info(SIGFPE, &info, current);
+		break;
+	case BRK_BUG:
+		die_if_kernel("Kernel bug detected", regs);
+		force_sig(SIGTRAP, current);
+		break;
+	case BRK_MEMU:
+		/*
+		 * Address errors may be deliberately induced by the FPU
+		 * emulator to retake control of the CPU after executing the
+		 * instruction in the delay slot of an emulated branch.
+		 *
+		 * Terminate if exception was recognized as a delay slot return
+		 * otherwise handle as normal.
+		 */
+		if (do_dsemulret(regs))
+			return;
+
+		die_if_kernel("Math emu break/trap", regs);
+		force_sig(SIGTRAP, current);
+		break;
+	default:
+		scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
+		die_if_kernel(b, regs);
+		force_sig(SIGTRAP, current);
+	}
+}
+
+asmlinkage void do_bp(struct pt_regs *regs)
+{
+	unsigned int opcode, bcode;
+
+	if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
+		goto out_sigsegv;
+
+	/*
+	 * There is the ancient bug in the MIPS assemblers that the break
+	 * code starts left to bit 16 instead to bit 6 in the opcode.
+	 * Gas is bug-compatible, but not always, grrr...
+	 * We handle both cases with a simple heuristics.  --macro
+	 */
+	bcode = ((opcode >> 6) & ((1 << 20) - 1));
+	if (bcode >= (1 << 10))
+		bcode >>= 10;
+
+	do_trap_or_bp(regs, bcode, "Break");
+	return;
+
+out_sigsegv:
+	force_sig(SIGSEGV, current);
+}
+
+asmlinkage void do_tr(struct pt_regs *regs)
+{
+	unsigned int opcode, tcode = 0;
+
+	if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
+		goto out_sigsegv;
+
+	/* Immediate versions don't provide a code.  */
+	if (!(opcode & OPCODE))
+		tcode = ((opcode >> 6) & ((1 << 10) - 1));
+
+	do_trap_or_bp(regs, tcode, "Trap");
+	return;
+
+out_sigsegv:
+	force_sig(SIGSEGV, current);
+}
+
+asmlinkage void do_ri(struct pt_regs *regs)
+{
+	unsigned int __user *epc = (unsigned int __user *)exception_epc(regs);
+	unsigned long old_epc = regs->cp0_epc;
+	unsigned int opcode = 0;
+	int status = -1;
+
+	if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
+	die_if_kernel("Reserved instruction in kernel code", regs);
+
+	if (unlikely(compute_return_epc(regs) < 0))
+		return;
+
+	if (unlikely(get_user(opcode, epc) < 0))
+		status = SIGSEGV;
+
+	if (!cpu_has_llsc && status < 0)
+		status = simulate_llsc(regs, opcode);
+
+	if (status < 0)
+		status = simulate_rdhwr(regs, opcode);
+
+	if (status < 0)
+		status = simulate_sync(regs, opcode);
+
+	if (status < 0)
+		status = SIGILL;
+
+	if (unlikely(status > 0)) {
+		regs->cp0_epc = old_epc;		/* Undo skip-over.  */
+		force_sig(status, current);
+	}
+}
+
+/*
+ * MIPS MT processors may have fewer FPU contexts than CPU threads. If we've
+ * emulated more than some threshold number of instructions, force migration to
+ * a "CPU" that has FP support.
+ */
+static void mt_ase_fp_affinity(void)
+{
+#ifdef CONFIG_MIPS_MT_FPAFF
+	if (mt_fpemul_threshold > 0 &&
+	     ((current->thread.emulated_fp++ > mt_fpemul_threshold))) {
+		/*
+		 * If there's no FPU present, or if the application has already
+		 * restricted the allowed set to exclude any CPUs with FPUs,
+		 * we'll skip the procedure.
+		 */
+		if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) {
+			cpumask_t tmask;
+
+			current->thread.user_cpus_allowed
+				= current->cpus_allowed;
+			cpus_and(tmask, current->cpus_allowed,
+				mt_fpu_cpumask);
+			set_cpus_allowed_ptr(current, &tmask);
+			set_thread_flag(TIF_FPUBOUND);
+		}
+	}
+#endif /* CONFIG_MIPS_MT_FPAFF */
+}
+
+/*
+ * No lock; only written during early bootup by CPU 0.
+ */
+static RAW_NOTIFIER_HEAD(cu2_chain);
+
+int __ref register_cu2_notifier(struct notifier_block *nb)
+{
+	return raw_notifier_chain_register(&cu2_chain, nb);
+}
+
+int cu2_notifier_call_chain(unsigned long val, void *v)
+{
+	return raw_notifier_call_chain(&cu2_chain, val, v);
+}
+
+static int default_cu2_call(struct notifier_block *nfb, unsigned long action,
+        void *data)
+{
+	struct pt_regs *regs = data;
+
+	switch (action) {
+	default:
+		die_if_kernel("Unhandled kernel unaligned access or invalid "
+			      "instruction", regs);
+		/* Fall through  */
+
+	case CU2_EXCEPTION:
+		force_sig(SIGILL, current);
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block default_cu2_notifier = {
+	.notifier_call	= default_cu2_call,
+	.priority	= 0x80000000,		/* Run last  */
+};
+
+asmlinkage void do_cpu(struct pt_regs *regs)
+{
+	unsigned int __user *epc;
+	unsigned long old_epc;
+	unsigned int opcode;
+	unsigned int cpid;
+	int status;
+	unsigned long __maybe_unused flags;
+
+	die_if_kernel("do_cpu invoked from kernel context!", regs);
+
+	cpid = (regs->cp0_cause >> CAUSEB_CE) & 3;
+
+	switch (cpid) {
+	case 0:
+		epc = (unsigned int __user *)exception_epc(regs);
+		old_epc = regs->cp0_epc;
+		opcode = 0;
+		status = -1;
+
+		if (unlikely(compute_return_epc(regs) < 0))
+			return;
+
+		if (unlikely(get_user(opcode, epc) < 0))
+			status = SIGSEGV;
+
+		if (!cpu_has_llsc && status < 0)
+			status = simulate_llsc(regs, opcode);
+
+		if (status < 0)
+			status = simulate_rdhwr(regs, opcode);
+
+		if (status < 0)
+			status = SIGILL;
+
+		if (unlikely(status > 0)) {
+			regs->cp0_epc = old_epc;	/* Undo skip-over.  */
+			force_sig(status, current);
+		}
+
+		return;
+
+	case 1:
+		if (used_math())	/* Using the FPU again.  */
+			own_fpu(1);
+		else {			/* First time FPU user.  */
+			init_fpu();
+			set_used_math();
+		}
+
+		if (!raw_cpu_has_fpu) {
+			int sig;
+			sig = fpu_emulator_cop1Handler(regs,
+						&current->thread.fpu, 0);
+			if (sig)
+				force_sig(sig, current);
+			else
+				mt_ase_fp_affinity();
+		}
+
+		return;
+
+	case 2:
+		raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs);
+		return;
+
+	case 3:
+		break;
+	}
+
+	force_sig(SIGILL, current);
+}
+
+asmlinkage void do_mdmx(struct pt_regs *regs)
+{
+	force_sig(SIGILL, current);
+}
+
+/*
+ * Called with interrupts disabled.
+ */
+asmlinkage void do_watch(struct pt_regs *regs)
+{
+	u32 cause;
+
+	/*
+	 * Clear WP (bit 22) bit of cause register so we don't loop
+	 * forever.
+	 */
+	cause = read_c0_cause();
+	cause &= ~(1 << 22);
+	write_c0_cause(cause);
+
+	/*
+	 * If the current thread has the watch registers loaded, save
+	 * their values and send SIGTRAP.  Otherwise another thread
+	 * left the registers set, clear them and continue.
+	 */
+	if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) {
+		mips_read_watch_registers();
+		local_irq_enable();
+		force_sig(SIGTRAP, current);
+	} else {
+		mips_clear_watch_registers();
+		local_irq_enable();
+	}
+}
+
+asmlinkage void do_mcheck(struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	int multi_match = regs->cp0_status & ST0_TS;
+
+	show_regs(regs);
+
+	if (multi_match) {
+		printk("Index   : %0x\n", read_c0_index());
+		printk("Pagemask: %0x\n", read_c0_pagemask());
+		printk("EntryHi : %0*lx\n", field, read_c0_entryhi());
+		printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
+		printk("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
+		printk("\n");
+		dump_tlb_all();
+	}
+
+	show_code((unsigned int __user *) regs->cp0_epc);
+
+	/*
+	 * Some chips may have other causes of machine check (e.g. SB1
+	 * graduation timer)
+	 */
+	panic("Caught Machine Check exception - %scaused by multiple "
+	      "matching entries in the TLB.",
+	      (multi_match) ? "" : "not ");
+}
+
+asmlinkage void do_mt(struct pt_regs *regs)
+{
+	int subcode;
+
+	subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT)
+			>> VPECONTROL_EXCPT_SHIFT;
+	switch (subcode) {
+	case 0:
+		printk(KERN_DEBUG "Thread Underflow\n");
+		break;
+	case 1:
+		printk(KERN_DEBUG "Thread Overflow\n");
+		break;
+	case 2:
+		printk(KERN_DEBUG "Invalid YIELD Qualifier\n");
+		break;
+	case 3:
+		printk(KERN_DEBUG "Gating Storage Exception\n");
+		break;
+	case 4:
+		printk(KERN_DEBUG "YIELD Scheduler Exception\n");
+		break;
+	case 5:
+		printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
+		break;
+	default:
+		printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",
+			subcode);
+		break;
+	}
+	die_if_kernel("MIPS MT Thread exception in kernel", regs);
+
+	force_sig(SIGILL, current);
+}
+
+
+asmlinkage void do_dsp(struct pt_regs *regs)
+{
+	if (cpu_has_dsp)
+		panic("Unexpected DSP exception\n");
+
+	force_sig(SIGILL, current);
+}
+
+asmlinkage void do_reserved(struct pt_regs *regs)
+{
+	/*
+	 * Game over - no way to handle this if it ever occurs.  Most probably
+	 * caused by a new unknown cpu type or after another deadly
+	 * hard/software error.
+	 */
+	show_regs(regs);
+	panic("Caught reserved exception %ld - should not happen.",
+	      (regs->cp0_cause & 0x7f) >> 2);
+}
+
+static int __initdata l1parity = 1;
+static int __init nol1parity(char *s)
+{
+	l1parity = 0;
+	return 1;
+}
+__setup("nol1par", nol1parity);
+static int __initdata l2parity = 1;
+static int __init nol2parity(char *s)
+{
+	l2parity = 0;
+	return 1;
+}
+__setup("nol2par", nol2parity);
+
+/*
+ * Some MIPS CPUs can enable/disable for cache parity detection, but do
+ * it different ways.
+ */
+static inline void parity_protection_init(void)
+{
+	switch (current_cpu_type()) {
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_74K:
+	case CPU_1004K:
+		{
+#define ERRCTL_PE	0x80000000
+#define ERRCTL_L2P	0x00800000
+			unsigned long errctl;
+			unsigned int l1parity_present, l2parity_present;
+
+			errctl = read_c0_ecc();
+			errctl &= ~(ERRCTL_PE|ERRCTL_L2P);
+
+			/* probe L1 parity support */
+			write_c0_ecc(errctl | ERRCTL_PE);
+			back_to_back_c0_hazard();
+			l1parity_present = (read_c0_ecc() & ERRCTL_PE);
+
+			/* probe L2 parity support */
+			write_c0_ecc(errctl|ERRCTL_L2P);
+			back_to_back_c0_hazard();
+			l2parity_present = (read_c0_ecc() & ERRCTL_L2P);
+
+			if (l1parity_present && l2parity_present) {
+				if (l1parity)
+					errctl |= ERRCTL_PE;
+				if (l1parity ^ l2parity)
+					errctl |= ERRCTL_L2P;
+			} else if (l1parity_present) {
+				if (l1parity)
+					errctl |= ERRCTL_PE;
+			} else if (l2parity_present) {
+				if (l2parity)
+					errctl |= ERRCTL_L2P;
+			} else {
+				/* No parity available */
+			}
+
+			printk(KERN_INFO "Writing ErrCtl register=%08lx\n", errctl);
+
+			write_c0_ecc(errctl);
+			back_to_back_c0_hazard();
+			errctl = read_c0_ecc();
+			printk(KERN_INFO "Readback ErrCtl register=%08lx\n", errctl);
+
+			if (l1parity_present)
+				printk(KERN_INFO "Cache parity protection %sabled\n",
+				       (errctl & ERRCTL_PE) ? "en" : "dis");
+
+			if (l2parity_present) {
+				if (l1parity_present && l1parity)
+					errctl ^= ERRCTL_L2P;
+				printk(KERN_INFO "L2 cache parity protection %sabled\n",
+				       (errctl & ERRCTL_L2P) ? "en" : "dis");
+			}
+		}
+		break;
+
+	case CPU_5KC:
+		write_c0_ecc(0x80000000);
+		back_to_back_c0_hazard();
+		/* Set the PE bit (bit 31) in the c0_errctl register. */
+		printk(KERN_INFO "Cache parity protection %sabled\n",
+		       (read_c0_ecc() & 0x80000000) ? "en" : "dis");
+		break;
+	case CPU_20KC:
+	case CPU_25KF:
+		/* Clear the DE bit (bit 16) in the c0_status register. */
+		printk(KERN_INFO "Enable cache parity protection for "
+		       "MIPS 20KC/25KF CPUs.\n");
+		clear_c0_status(ST0_DE);
+		break;
+	default:
+		break;
+	}
+}
+
+asmlinkage void cache_parity_error(void)
+{
+	const int field = 2 * sizeof(unsigned long);
+	unsigned int reg_val;
+
+	/* For the moment, report the problem and hang. */
+	printk("Cache error exception:\n");
+	printk("cp0_errorepc == %0*lx\n", field, read_c0_errorepc());
+	reg_val = read_c0_cacheerr();
+	printk("c0_cacheerr == %08x\n", reg_val);
+
+	printk("Decoded c0_cacheerr: %s cache fault in %s reference.\n",
+	       reg_val & (1<<30) ? "secondary" : "primary",
+	       reg_val & (1<<31) ? "data" : "insn");
+	printk("Error bits: %s%s%s%s%s%s%s\n",
+	       reg_val & (1<<29) ? "ED " : "",
+	       reg_val & (1<<28) ? "ET " : "",
+	       reg_val & (1<<26) ? "EE " : "",
+	       reg_val & (1<<25) ? "EB " : "",
+	       reg_val & (1<<24) ? "EI " : "",
+	       reg_val & (1<<23) ? "E1 " : "",
+	       reg_val & (1<<22) ? "E0 " : "");
+	printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+	if (reg_val & (1<<22))
+		printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());
+
+	if (reg_val & (1<<23))
+		printk("DErrAddr1: 0x%0*lx\n", field, read_c0_derraddr1());
+#endif
+
+	panic("Can't handle the cache error!");
+}
+
+/*
+ * SDBBP EJTAG debug exception handler.
+ * We skip the instruction and return to the next instruction.
+ */
+void ejtag_exception_handler(struct pt_regs *regs)
+{
+	const int field = 2 * sizeof(unsigned long);
+	unsigned long depc, old_epc;
+	unsigned int debug;
+
+	printk(KERN_DEBUG "SDBBP EJTAG debug exception - not handled yet, just ignored!\n");
+	depc = read_c0_depc();
+	debug = read_c0_debug();
+	printk(KERN_DEBUG "c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug);
+	if (debug & 0x80000000) {
+		/*
+		 * In branch delay slot.
+		 * We cheat a little bit here and use EPC to calculate the
+		 * debug return address (DEPC). EPC is restored after the
+		 * calculation.
+		 */
+		old_epc = regs->cp0_epc;
+		regs->cp0_epc = depc;
+		__compute_return_epc(regs);
+		depc = regs->cp0_epc;
+		regs->cp0_epc = old_epc;
+	} else
+		depc += 4;
+	write_c0_depc(depc);
+
+#if 0
+	printk(KERN_DEBUG "\n\n----- Enable EJTAG single stepping ----\n\n");
+	write_c0_debug(debug | 0x100);
+#endif
+}
+
+/*
+ * NMI exception handler.
+ */
+NORET_TYPE void ATTRIB_NORET nmi_exception_handler(struct pt_regs *regs)
+{
+	bust_spinlocks(1);
+	printk("NMI taken!!!!\n");
+	die("NMI", regs);
+}
+
+#define VECTORSPACING 0x100	/* for EI/VI mode */
+
+unsigned long ebase;
+unsigned long exception_handlers[32];
+unsigned long vi_handlers[64];
+
+void __init *set_except_vector(int n, void *addr)
+{
+	unsigned long handler = (unsigned long) addr;
+	unsigned long old_handler = exception_handlers[n];
+
+	exception_handlers[n] = handler;
+	if (n == 0 && cpu_has_divec) {
+		unsigned long jump_mask = ~((1 << 28) - 1);
+		u32 *buf = (u32 *)(ebase + 0x200);
+		unsigned int k0 = 26;
+		if ((handler & jump_mask) == ((ebase + 0x200) & jump_mask)) {
+			uasm_i_j(&buf, handler & ~jump_mask);
+			uasm_i_nop(&buf);
+		} else {
+			UASM_i_LA(&buf, k0, handler);
+			uasm_i_jr(&buf, k0);
+			uasm_i_nop(&buf);
+		}
+		local_flush_icache_range(ebase + 0x200, (unsigned long)buf);
+	}
+	return (void *)old_handler;
+}
+
+static asmlinkage void do_default_vi(void)
+{
+	show_regs(get_irq_regs());
+	panic("Caught unexpected vectored interrupt.");
+}
+
+static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
+{
+	unsigned long handler;
+	unsigned long old_handler = vi_handlers[n];
+	int srssets = current_cpu_data.srsets;
+	u32 *w;
+	unsigned char *b;
+
+	BUG_ON(!cpu_has_veic && !cpu_has_vint);
+
+	if (addr == NULL) {
+		handler = (unsigned long) do_default_vi;
+		srs = 0;
+	} else
+		handler = (unsigned long) addr;
+	vi_handlers[n] = (unsigned long) addr;
+
+	b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
+
+	if (srs >= srssets)
+		panic("Shadow register set %d not supported", srs);
+
+	if (cpu_has_veic) {
+		if (board_bind_eic_interrupt)
+			board_bind_eic_interrupt(n, srs);
+	} else if (cpu_has_vint) {
+		/* SRSMap is only defined if shadow sets are implemented */
+		if (srssets > 1)
+			change_c0_srsmap(0xf << n*4, srs << n*4);
+	}
+
+	if (srs == 0) {
+		/*
+		 * If no shadow set is selected then use the default handler
+		 * that does normal register saving and a standard interrupt exit
+		 */
+
+		extern char except_vec_vi, except_vec_vi_lui;
+		extern char except_vec_vi_ori, except_vec_vi_end;
+		extern char rollback_except_vec_vi;
+		char *vec_start = (cpu_wait == r4k_wait) ?
+			&rollback_except_vec_vi : &except_vec_vi;
+#ifdef CONFIG_MIPS_MT_SMTC
+		/*
+		 * We need to provide the SMTC vectored interrupt handler
+		 * not only with the address of the handler, but with the
+		 * Status.IM bit to be masked before going there.
+		 */
+		extern char except_vec_vi_mori;
+		const int mori_offset = &except_vec_vi_mori - vec_start;
+#endif /* CONFIG_MIPS_MT_SMTC */
+		const int handler_len = &except_vec_vi_end - vec_start;
+		const int lui_offset = &except_vec_vi_lui - vec_start;
+		const int ori_offset = &except_vec_vi_ori - vec_start;
+
+		if (handler_len > VECTORSPACING) {
+			/*
+			 * Sigh... panicing won't help as the console
+			 * is probably not configured :(
+			 */
+			panic("VECTORSPACING too small");
+		}
+
+		memcpy(b, vec_start, handler_len);
+#ifdef CONFIG_MIPS_MT_SMTC
+		BUG_ON(n > 7);	/* Vector index %d exceeds SMTC maximum. */
+
+		w = (u32 *)(b + mori_offset);
+		*w = (*w & 0xffff0000) | (0x100 << n);
+#endif /* CONFIG_MIPS_MT_SMTC */
+		w = (u32 *)(b + lui_offset);
+		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
+		w = (u32 *)(b + ori_offset);
+		*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+handler_len));
+	}
+	else {
+		/*
+		 * In other cases jump directly to the interrupt handler
+		 *
+		 * It is the handlers responsibility to save registers if required
+		 * (eg hi/lo) and return from the exception using "eret"
+		 */
+		w = (u32 *)b;
+		*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
+		*w = 0;
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+8));
+	}
+
+	return (void *)old_handler;
+}
+
+void *set_vi_handler(int n, vi_handler_t addr)
+{
+	return set_vi_srs_handler(n, addr, 0);
+}
+
+extern void cpu_cache_init(void);
+extern void tlb_init(void);
+extern void flush_tlb_handlers(void);
+
+/*
+ * Timer interrupt
+ */
+int cp0_compare_irq;
+int cp0_compare_irq_shift;
+
+/*
+ * Performance counter IRQ or -1 if shared with timer
+ */
+int cp0_perfcount_irq;
+EXPORT_SYMBOL_GPL(cp0_perfcount_irq);
+
+static int __cpuinitdata noulri;
+
+static int __init ulri_disable(char *s)
+{
+	pr_info("Disabling ulri\n");
+	noulri = 1;
+
+	return 1;
+}
+__setup("noulri", ulri_disable);
+
+void __cpuinit per_cpu_trap_init(void)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned int status_set = ST0_CU0;
+#ifdef CONFIG_MIPS_MT_SMTC
+	int secondaryTC = 0;
+	int bootTC = (cpu == 0);
+
+	/*
+	 * Only do per_cpu_trap_init() for first TC of Each VPE.
+	 * Note that this hack assumes that the SMTC init code
+	 * assigns TCs consecutively and in ascending order.
+	 */
+
+	if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
+	    ((read_c0_tcbind() & TCBIND_CURVPE) == cpu_data[cpu - 1].vpe_id))
+		secondaryTC = 1;
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	/*
+	 * Disable coprocessors and select 32-bit or 64-bit addressing
+	 * and the 16/32 or 32/32 FPR register model.  Reset the BEV
+	 * flag that some firmware may have left set and the TS bit (for
+	 * IP27).  Set XX for ISA IV code to work.
+	 */
+#ifdef CONFIG_64BIT
+	status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
+#endif
+	if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
+		status_set |= ST0_XX;
+	if (cpu_has_dsp)
+		status_set |= ST0_MX;
+
+	change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
+			 status_set);
+
+	if (cpu_has_mips_r2) {
+		unsigned int enable = 0x0000000f | cpu_hwrena_impl_bits;
+
+		if (!noulri && cpu_has_userlocal)
+			enable |= (1 << 29);
+
+		write_c0_hwrena(enable);
+	}
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	if (!secondaryTC) {
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	if (cpu_has_veic || cpu_has_vint) {
+		unsigned long sr = set_c0_status(ST0_BEV);
+		write_c0_ebase(ebase);
+		write_c0_status(sr);
+		/* Setting vector spacing enables EI/VI mode  */
+		change_c0_intctl(0x3e0, VECTORSPACING);
+	}
+	if (cpu_has_divec) {
+		if (cpu_has_mipsmt) {
+			unsigned int vpflags = dvpe();
+			set_c0_cause(CAUSEF_IV);
+			evpe(vpflags);
+		} else
+			set_c0_cause(CAUSEF_IV);
+	}
+
+	/*
+	 * Before R2 both interrupt numbers were fixed to 7, so on R2 only:
+	 *
+	 *  o read IntCtl.IPTI to determine the timer interrupt
+	 *  o read IntCtl.IPPCI to determine the performance counter interrupt
+	 */
+	if (cpu_has_mips_r2) {
+		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
+		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
+		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
+		if (cp0_perfcount_irq == cp0_compare_irq)
+			cp0_perfcount_irq = -1;
+	} else {
+		cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
+		cp0_compare_irq_shift = cp0_compare_irq;
+		cp0_perfcount_irq = -1;
+	}
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	}
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
+	TLBMISS_HANDLER_SETUP();
+
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+	BUG_ON(current->mm);
+	enter_lazy_tlb(&init_mm, current);
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	if (bootTC) {
+#endif /* CONFIG_MIPS_MT_SMTC */
+		cpu_cache_init();
+		tlb_init();
+#ifdef CONFIG_MIPS_MT_SMTC
+	} else if (!secondaryTC) {
+		/*
+		 * First TC in non-boot VPE must do subset of tlb_init()
+		 * for MMU countrol registers.
+		 */
+		write_c0_pagemask(PM_DEFAULT_MASK);
+		write_c0_wired(0);
+	}
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/* Install CPU exception handler */
+void __init set_handler(unsigned long offset, void *addr, unsigned long size)
+{
+	memcpy((void *)(ebase + offset), addr, size);
+	local_flush_icache_range(ebase + offset, ebase + offset + size);
+}
+
+static char panic_null_cerr[] __cpuinitdata =
+	"Trying to set NULL cache error exception handler";
+
+/*
+ * Install uncached CPU exception handler.
+ * This is suitable only for the cache error exception which is the only
+ * exception handler that is being run uncached.
+ */
+void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
+	unsigned long size)
+{
+	unsigned long uncached_ebase = CKSEG1ADDR(ebase);
+
+	if (!addr)
+		panic(panic_null_cerr);
+
+	memcpy((void *)(uncached_ebase + offset), addr, size);
+}
+
+static int __initdata rdhwr_noopt;
+static int __init set_rdhwr_noopt(char *str)
+{
+	rdhwr_noopt = 1;
+	return 1;
+}
+
+__setup("rdhwr_noopt", set_rdhwr_noopt);
+
+void __init trap_init(void)
+{
+	extern char except_vec3_generic, except_vec3_r4000;
+	extern char except_vec4;
+	unsigned long i;
+	int rollback;
+
+	check_wait();
+	rollback = (cpu_wait == r4k_wait);
+
+#if defined(CONFIG_KGDB)
+	if (kgdb_early_setup)
+		return;	/* Already done */
+#endif
+
+	if (cpu_has_veic || cpu_has_vint) {
+		unsigned long size = 0x200 + VECTORSPACING*64;
+		ebase = (unsigned long)
+			__alloc_bootmem(size, 1 << fls(size), 0);
+	} else {
+		ebase = CKSEG0;
+		if (cpu_has_mips_r2)
+			ebase += (read_c0_ebase() & 0x3ffff000);
+	}
+
+	per_cpu_trap_init();
+
+	/*
+	 * Copy the generic exception handlers to their final destination.
+	 * This will be overriden later as suitable for a particular
+	 * configuration.
+	 */
+	set_handler(0x180, &except_vec3_generic, 0x80);
+
+	/*
+	 * Setup default vectors
+	 */
+	for (i = 0; i <= 31; i++)
+		set_except_vector(i, handle_reserved);
+
+	/*
+	 * Copy the EJTAG debug exception vector handler code to it's final
+	 * destination.
+	 */
+	if (cpu_has_ejtag && board_ejtag_handler_setup)
+		board_ejtag_handler_setup();
+
+	/*
+	 * Only some CPUs have the watch exceptions.
+	 */
+	if (cpu_has_watch)
+		set_except_vector(23, handle_watch);
+
+	/*
+	 * Initialise interrupt handlers
+	 */
+	if (cpu_has_veic || cpu_has_vint) {
+		int nvec = cpu_has_veic ? 64 : 8;
+		for (i = 0; i < nvec; i++)
+			set_vi_handler(i, NULL);
+	}
+	else if (cpu_has_divec)
+		set_handler(0x200, &except_vec4, 0x8);
+
+	/*
+	 * Some CPUs can enable/disable for cache parity detection, but does
+	 * it different ways.
+	 */
+	parity_protection_init();
+
+	/*
+	 * The Data Bus Errors / Instruction Bus Errors are signaled
+	 * by external hardware.  Therefore these two exceptions
+	 * may have board specific handlers.
+	 */
+	if (board_be_init)
+		board_be_init();
+
+	set_except_vector(0, rollback ? rollback_handle_int : handle_int);
+	set_except_vector(1, handle_tlbm);
+	set_except_vector(2, handle_tlbl);
+	set_except_vector(3, handle_tlbs);
+
+	set_except_vector(4, handle_adel);
+	set_except_vector(5, handle_ades);
+
+	set_except_vector(6, handle_ibe);
+	set_except_vector(7, handle_dbe);
+
+	set_except_vector(8, handle_sys);
+	set_except_vector(9, handle_bp);
+	set_except_vector(10, rdhwr_noopt ? handle_ri :
+			  (cpu_has_vtag_icache ?
+			   handle_ri_rdhwr_vivt : handle_ri_rdhwr));
+	set_except_vector(11, handle_cpu);
+	set_except_vector(12, handle_ov);
+	set_except_vector(13, handle_tr);
+
+	if (current_cpu_type() == CPU_R6000 ||
+	    current_cpu_type() == CPU_R6000A) {
+		/*
+		 * The R6000 is the only R-series CPU that features a machine
+		 * check exception (similar to the R4000 cache error) and
+		 * unaligned ldc1/sdc1 exception.  The handlers have not been
+		 * written yet.  Well, anyway there is no R6000 machine on the
+		 * current list of targets for Linux/MIPS.
+		 * (Duh, crap, there is someone with a triple R6k machine)
+		 */
+		//set_except_vector(14, handle_mc);
+		//set_except_vector(15, handle_ndc);
+	}
+
+
+	if (board_nmi_handler_setup)
+		board_nmi_handler_setup();
+
+	if (cpu_has_fpu && !cpu_has_nofpuex)
+		set_except_vector(15, handle_fpe);
+
+	set_except_vector(22, handle_mdmx);
+
+	if (cpu_has_mcheck)
+		set_except_vector(24, handle_mcheck);
+
+	if (cpu_has_mipsmt)
+		set_except_vector(25, handle_mt);
+
+	set_except_vector(26, handle_dsp);
+
+	if (cpu_has_vce)
+		/* Special exception: R4[04]00 uses also the divec space. */
+		memcpy((void *)(ebase + 0x180), &except_vec3_r4000, 0x100);
+	else if (cpu_has_4kex)
+		memcpy((void *)(ebase + 0x180), &except_vec3_generic, 0x80);
+	else
+		memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80);
+
+	local_flush_icache_range(ebase, ebase + 0x400);
+	flush_tlb_handlers();
+
+	sort_extable(__start___dbe_table, __stop___dbe_table);
+
+	register_cu2_notifier(&default_cu2_notifier);
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/Makefile linux-2.6.35.7/arch/mips/Makefile
--- linux-2.6.35.7.orig/arch/mips/Makefile	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/arch/mips/Makefile	2010-10-14 20:27:59.685601082 +0200
@@ -179,6 +179,13 @@
 cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
 endif
 
+#
+# Atheros AR71xx
+#
+core-$(CONFIG_ATHEROS_AR71XX)	+= arch/mips/ar71xx/
+cflags-$(CONFIG_ATHEROS_AR71XX)	+= -I$(srctree)/arch/mips/include/asm/mach-ar71xx
+load-$(CONFIG_ATHEROS_AR71XX)	+= 0xffffffff80060000
+
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
 cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
diff -Nur linux-2.6.35.7.orig/arch/mips/pci/Makefile linux-2.6.35.7/arch/mips/pci/Makefile
--- linux-2.6.35.7.orig/arch/mips/pci/Makefile	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/arch/mips/pci/Makefile	2010-10-14 20:27:59.718092160 +0200
@@ -18,6 +18,7 @@
 obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
 obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
 					ops-bcm63xx.o
+obj-$(CONFIG_ATHEROS_AR71XX)	+= pci-ar71xx.o pci-ar724x.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
diff -Nur linux-2.6.35.7.orig/arch/mips/pci/pci-ar71xx.c linux-2.6.35.7/arch/mips/pci/pci-ar71xx.c
--- linux-2.6.35.7.orig/arch/mips/pci/pci-ar71xx.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/pci/pci-ar71xx.c	2010-10-14 20:27:59.758101117 +0200
@@ -0,0 +1,409 @@
+/*
+ *  Atheros AR71xx PCI host controller driver
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/resource.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt, args...)	printk(KERN_DEBUG fmt, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+#define AR71XX_PCI_DELAY	100 /* msecs */
+
+#if 0
+#define PCI_IDSEL_BASE	PCI_IDSEL_ADL_START
+#else
+#define PCI_IDSEL_BASE	0
+#endif
+
+static void __iomem *ar71xx_pcicfg_base;
+static DEFINE_SPINLOCK(ar71xx_pci_lock);
+static int ar71xx_pci_fixup_enable;
+
+static inline void ar71xx_pci_delay(void)
+{
+	mdelay(AR71XX_PCI_DELAY);
+}
+
+/* Byte lane enable bits */
+static u8 ble_table[4][4] = {
+	{0x0, 0xf, 0xf, 0xf},
+	{0xe, 0xd, 0xb, 0x7},
+	{0xc, 0xf, 0x3, 0xf},
+	{0xf, 0xf, 0xf, 0xf},
+};
+
+static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
+{
+	u32 t;
+
+	t = ble_table[size & 3][where & 3];
+	BUG_ON(t == 0xf);
+	t <<= (local) ? 20 : 4;
+	return t;
+}
+
+static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn,
+					int where)
+{
+	u32 ret;
+
+	if (!bus->number) {
+		/* type 0 */
+		ret = (1 << (PCI_IDSEL_BASE + PCI_SLOT(devfn)))
+		    | (PCI_FUNC(devfn) << 8) | (where & ~3);
+	} else {
+		/* type 1 */
+		ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11)
+		    | (PCI_FUNC(devfn) << 8) | (where & ~3) | 1;
+	}
+
+	return ret;
+}
+
+int ar71xx_pci_be_handler(int is_fixup)
+{
+	void __iomem *base = ar71xx_pcicfg_base;
+	u32 pci_err;
+	u32 ahb_err;
+
+	pci_err = __raw_readl(base + PCI_REG_PCI_ERR) & 3;
+	if (pci_err) {
+		if (!is_fixup)
+			printk(KERN_ALERT "PCI error %d at PCI addr 0x%x\n",
+				pci_err,
+				__raw_readl(base + PCI_REG_PCI_ERR_ADDR));
+
+		__raw_writel(pci_err, base + PCI_REG_PCI_ERR);
+	}
+
+	ahb_err = __raw_readl(base + PCI_REG_AHB_ERR) & 1;
+	if (ahb_err) {
+		if (!is_fixup)
+			printk(KERN_ALERT "AHB error at AHB address 0x%x\n",
+				__raw_readl(base + PCI_REG_AHB_ERR_ADDR));
+
+		__raw_writel(ahb_err, base + PCI_REG_AHB_ERR);
+	}
+
+	return ((ahb_err | pci_err) ? 1 : 0);
+}
+
+static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus,
+			unsigned int devfn, int where, int size, u32 cmd)
+{
+	void __iomem *base = ar71xx_pcicfg_base;
+	u32 addr;
+
+	addr = ar71xx_pci_bus_addr(bus, devfn, where);
+
+	DBG("PCI: set cfgaddr: %02x:%02x.%01x/%02x:%01d, addr=%08x\n",
+		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+		where, size, addr);
+
+	__raw_writel(addr, base + PCI_REG_CFG_AD);
+	__raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0),
+		     base + PCI_REG_CFG_CBE);
+
+	return ar71xx_pci_be_handler(1);
+}
+
+static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 *value)
+{
+	void __iomem *base = ar71xx_pcicfg_base;
+	static u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
+	unsigned long flags;
+	u32 data;
+	int ret;
+
+	ret = PCIBIOS_SUCCESSFUL;
+
+	DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d\n", bus->number,
+			PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
+
+	spin_lock_irqsave(&ar71xx_pci_lock, flags);
+
+	if (bus->number == 0 && devfn == 0) {
+		u32 t;
+
+		t = PCI_CRP_CMD_READ | (where & ~3);
+
+		__raw_writel(t, base + PCI_REG_CRP_AD_CBE);
+		data = __raw_readl(base + PCI_REG_CRP_RDDATA);
+
+		DBG("PCI: rd local cfg, ad_cbe:%08x, data:%08x\n", t, data);
+
+	} else {
+		int err;
+
+		err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
+						PCI_CFG_CMD_READ);
+
+		if (err == 0) {
+			data = __raw_readl(base + PCI_REG_CFG_RDDATA);
+		} else {
+			ret = PCIBIOS_DEVICE_NOT_FOUND;
+			data = ~0;
+		}
+	}
+
+	spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
+
+	DBG("PCI: read config: data=%08x raw=%08x\n",
+		(data >> (8 * (where & 3))) & mask[size & 7], data);
+
+	*value = (data >> (8 * (where & 3))) & mask[size & 7];
+
+	return ret;
+}
+
+static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 value)
+{
+	void __iomem *base = ar71xx_pcicfg_base;
+	unsigned long flags;
+	int ret;
+
+	DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d value=%08x\n",
+		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+		where, size, value);
+
+	value = value << (8 * (where & 3));
+	ret = PCIBIOS_SUCCESSFUL;
+
+	spin_lock_irqsave(&ar71xx_pci_lock, flags);
+	if (bus->number == 0 && devfn == 0) {
+		u32 t;
+
+		t = PCI_CRP_CMD_WRITE | (where & ~3);
+		t |= ar71xx_pci_get_ble(where, size, 1);
+
+		DBG("PCI: wr local cfg, ad_cbe:%08x, value:%08x\n", t, value);
+
+		__raw_writel(t, base + PCI_REG_CRP_AD_CBE);
+		__raw_writel(value, base + PCI_REG_CRP_WRDATA);
+	} else {
+		int err;
+
+		err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
+						PCI_CFG_CMD_WRITE);
+
+		if (err == 0)
+			__raw_writel(value, base + PCI_REG_CFG_WRDATA);
+		else
+			ret = PCIBIOS_DEVICE_NOT_FOUND;
+	}
+	spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
+
+	return ret;
+}
+
+static void ar71xx_pci_fixup(struct pci_dev *dev)
+{
+	u32 t;
+
+	if (!ar71xx_pci_fixup_enable)
+		return;
+
+	if (dev->bus->number != 0 || dev->devfn != 0)
+		return;
+
+	DBG("PCI: fixup host controller %s (%04x:%04x)\n", pci_name(dev),
+		dev->vendor, dev->device);
+
+	/* setup COMMAND register */
+	t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
+	  | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
+
+	pci_write_config_word(dev, PCI_COMMAND, t);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar71xx_pci_fixup);
+
+int __init ar71xx_pcibios_map_irq(const struct pci_dev *dev, uint8_t slot,
+				  uint8_t pin)
+{
+	int irq = -1;
+	int i;
+
+	slot -= PCI_IDSEL_ADL_START - PCI_IDSEL_BASE;
+
+	for (i = 0; i < ar71xx_pci_nr_irqs; i++) {
+		struct ar71xx_pci_irq *entry;
+
+		entry = &ar71xx_pci_irq_map[i];
+		if (entry->slot == slot && entry->pin == pin) {
+			irq = entry->irq;
+			break;
+		}
+	}
+
+	if (irq < 0) {
+		printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n",
+				pin, pci_name((struct pci_dev *)dev));
+	} else {
+		printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n",
+				irq, pin, pci_name((struct pci_dev *)dev));
+	}
+
+	return irq;
+}
+
+static struct pci_ops ar71xx_pci_ops = {
+	.read	= ar71xx_pci_read_config,
+	.write	= ar71xx_pci_write_config,
+};
+
+static struct resource ar71xx_pci_io_resource = {
+	.name		= "PCI IO space",
+	.start		= 0,
+	.end		= 0,
+	.flags		= IORESOURCE_IO,
+};
+
+static struct resource ar71xx_pci_mem_resource = {
+	.name		= "PCI memory space",
+	.start		= AR71XX_PCI_MEM_BASE,
+	.end		= AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
+	.flags		= IORESOURCE_MEM
+};
+
+static struct pci_controller ar71xx_pci_controller = {
+	.pci_ops	= &ar71xx_pci_ops,
+	.mem_resource	= &ar71xx_pci_mem_resource,
+	.io_resource	= &ar71xx_pci_io_resource,
+};
+
+static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *base = ar71xx_reset_base;
+	u32 pending;
+
+	pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
+		  __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+
+	if (pending & PCI_INT_DEV0)
+		generic_handle_irq(AR71XX_PCI_IRQ_DEV0);
+
+	else if (pending & PCI_INT_DEV1)
+		generic_handle_irq(AR71XX_PCI_IRQ_DEV1);
+
+	else if (pending & PCI_INT_DEV2)
+		generic_handle_irq(AR71XX_PCI_IRQ_DEV2);
+
+	else if (pending & PCI_INT_CORE)
+		generic_handle_irq(AR71XX_PCI_IRQ_CORE);
+
+	else
+		spurious_interrupt();
+}
+
+static void ar71xx_pci_irq_unmask(unsigned int irq)
+{
+	void __iomem *base = ar71xx_reset_base;
+	u32 t;
+
+	irq -= AR71XX_PCI_IRQ_BASE;
+
+	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+
+	/* flush write */
+	(void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+}
+
+static void ar71xx_pci_irq_mask(unsigned int irq)
+{
+	void __iomem *base = ar71xx_reset_base;
+	u32 t;
+
+	irq -= AR71XX_PCI_IRQ_BASE;
+
+	t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+
+	/* flush write */
+	(void) __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+}
+
+static struct irq_chip ar71xx_pci_irq_chip = {
+	.name		= "AR71XX PCI ",
+	.mask		= ar71xx_pci_irq_mask,
+	.unmask		= ar71xx_pci_irq_unmask,
+	.mask_ack	= ar71xx_pci_irq_mask,
+};
+
+static void __init ar71xx_pci_irq_init(void)
+{
+	void __iomem *base = ar71xx_reset_base;
+	int i;
+
+	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
+	__raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
+
+	for (i = AR71XX_PCI_IRQ_BASE;
+	     i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		set_irq_chip_and_handler(i, &ar71xx_pci_irq_chip,
+					 handle_level_irq);
+	}
+
+	set_irq_chained_handler(AR71XX_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
+}
+
+int __init ar71xx_pcibios_init(void)
+{
+	void __iomem *ddr_base = ar71xx_ddr_base;
+
+	ar71xx_device_stop(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE);
+	ar71xx_pci_delay();
+
+	ar71xx_device_start(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE);
+	ar71xx_pci_delay();
+
+	ar71xx_pcicfg_base = ioremap_nocache(AR71XX_PCI_CFG_BASE,
+						AR71XX_PCI_CFG_SIZE);
+	if (ar71xx_pcicfg_base == NULL)
+		return -ENOMEM;
+
+	__raw_writel(PCI_WIN0_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN0);
+	__raw_writel(PCI_WIN1_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN1);
+	__raw_writel(PCI_WIN2_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN2);
+	__raw_writel(PCI_WIN3_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN3);
+	__raw_writel(PCI_WIN4_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN4);
+	__raw_writel(PCI_WIN5_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN5);
+	__raw_writel(PCI_WIN6_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN6);
+	__raw_writel(PCI_WIN7_OFFS, ddr_base + AR71XX_DDR_REG_PCI_WIN7);
+
+	ar71xx_pci_delay();
+
+	/* clear bus errors */
+	(void)ar71xx_pci_be_handler(1);
+
+	ar71xx_pci_fixup_enable = 1;
+	ar71xx_pci_irq_init();
+	register_pci_controller(&ar71xx_pci_controller);
+
+	return 0;
+}
diff -Nur linux-2.6.35.7.orig/arch/mips/pci/pci-ar724x.c linux-2.6.35.7/arch/mips/pci/pci-ar724x.c
--- linux-2.6.35.7.orig/arch/mips/pci/pci-ar724x.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/arch/mips/pci/pci-ar724x.c	2010-10-14 20:27:59.798101290 +0200
@@ -0,0 +1,395 @@
+/*
+ *  Atheros AR724x PCI host controller driver
+ *
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/resource.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/pci.h>
+#include <linux/pci_regs.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt, args...)	printk(KERN_INFO fmt, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+static void __iomem *ar724x_pci_localcfg_base;
+static void __iomem *ar724x_pci_devcfg_base;
+static void __iomem *ar724x_pci_ctrl_base;
+static int ar724x_pci_fixup_enable;
+
+static DEFINE_SPINLOCK(ar724x_pci_lock);
+
+static void ar724x_pci_read(void __iomem *base, int where, int size, u32 *value)
+{
+	unsigned long flags;
+	u32 data;
+
+	spin_lock_irqsave(&ar724x_pci_lock, flags);
+	data = __raw_readl(base + (where & ~3));
+
+	switch (size) {
+	case 1:
+		if (where & 1)
+			data >>= 8;
+		if (where & 2)
+			data >>= 16;
+		data &= 0xFF;
+		break;
+	case 2:
+		if (where & 2)
+			data >>= 16;
+		data &= 0xFFFF;
+		break;
+	}
+
+	*value = data;
+	spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+}
+
+static void ar724x_pci_write(void __iomem *base, int where, int size, u32 value)
+{
+	unsigned long flags;
+	u32 data;
+	int s;
+
+	spin_lock_irqsave(&ar724x_pci_lock, flags);
+	data = __raw_readl(base + (where & ~3));
+
+	switch (size) {
+	case 1:
+		s = ((where & 3) << 3);
+		data &= ~(0xFF << s);
+		data |= ((value & 0xFF) << s);
+		break;
+	case 2:
+		s = ((where & 2) << 3);
+		data &= ~(0xFFFF << s);
+		data |= ((value & 0xFFFF) << s);
+		break;
+	case 4:
+		data = value;
+		break;
+	}
+
+	__raw_writel(data, base + (where & ~3));
+	/* flush write */
+	(void)__raw_readl(base + (where & ~3));
+	spin_unlock_irqrestore(&ar724x_pci_lock, flags);
+}
+
+static int ar724x_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 *value)
+{
+
+	if (bus->number != 0 || devfn != 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	ar724x_pci_read(ar724x_pci_devcfg_base, where, size, value);
+
+	DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d, value=%08x\n",
+			bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+			where, size, *value);
+
+	/*
+	 * WAR for BAR issue - We are unable to access the PCI device space
+	 * if we set the BAR with proper base address
+	 */
+	if ((where == 0x10) && (size == 4)) {
+		if (ar71xx_soc == AR71XX_SOC_AR7240)
+			ar724x_pci_write(ar724x_pci_devcfg_base, where, size, 0xffff);
+		else
+			ar724x_pci_write(ar724x_pci_devcfg_base, where, size, 0x1000ffff);
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int ar724x_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 value)
+{
+	if (bus->number != 0 || devfn != 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d, value=%08x\n",
+		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
+		where, size, value);
+
+	ar724x_pci_write(ar724x_pci_devcfg_base, where, size, value);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static void ar724x_pci_fixup(struct pci_dev *dev)
+{
+	u16 cmd;
+
+	if (!ar724x_pci_fixup_enable)
+		return;
+
+	if (dev->bus->number != 0 || dev->devfn != 0)
+		return;
+
+	/* setup COMMAND register */
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+	       PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR |
+	       PCI_COMMAND_FAST_BACK;
+
+	pci_write_config_word(dev, PCI_COMMAND, cmd);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar724x_pci_fixup);
+
+int __init ar724x_pcibios_map_irq(const struct pci_dev *dev, uint8_t slot,
+				  uint8_t pin)
+{
+	int irq = -1;
+	int i;
+
+	for (i = 0; i < ar71xx_pci_nr_irqs; i++) {
+		struct ar71xx_pci_irq *entry;
+		entry = &ar71xx_pci_irq_map[i];
+
+		if (entry->slot == slot && entry->pin == pin) {
+			irq = entry->irq;
+			break;
+		}
+	}
+
+	if (irq < 0)
+		printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n",
+				pin, pci_name((struct pci_dev *)dev));
+	else
+		printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n",
+				irq, pin, pci_name((struct pci_dev *)dev));
+
+	return irq;
+}
+
+static struct pci_ops ar724x_pci_ops = {
+	.read	= ar724x_pci_read_config,
+	.write	= ar724x_pci_write_config,
+};
+
+static struct resource ar724x_pci_io_resource = {
+	.name		= "PCI IO space",
+	.start		= 0,
+	.end		= 0,
+	.flags		= IORESOURCE_IO,
+};
+
+static struct resource ar724x_pci_mem_resource = {
+	.name		= "PCI memory space",
+	.start		= AR71XX_PCI_MEM_BASE,
+	.end		= AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
+	.flags		= IORESOURCE_MEM
+};
+
+static struct pci_controller ar724x_pci_controller = {
+	.pci_ops	= &ar724x_pci_ops,
+	.mem_resource	= &ar724x_pci_mem_resource,
+	.io_resource	= &ar724x_pci_io_resource,
+};
+
+static void __init ar724x_pci_reset(void)
+{
+	ar71xx_device_stop(AR724X_RESET_PCIE);
+	ar71xx_device_stop(AR724X_RESET_PCIE_PHY);
+	ar71xx_device_stop(AR724X_RESET_PCIE_PHY_SERIAL);
+	udelay(100);
+
+	ar71xx_device_start(AR724X_RESET_PCIE_PHY_SERIAL);
+	udelay(100);
+	ar71xx_device_start(AR724X_RESET_PCIE_PHY);
+	ar71xx_device_start(AR724X_RESET_PCIE);
+}
+
+static int __init ar724x_pci_setup(void)
+{
+	void __iomem *base = ar724x_pci_ctrl_base;
+	u32 t;
+
+	/* setup COMMAND register */
+	t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE |
+	    PCI_COMMAND_PARITY|PCI_COMMAND_SERR|PCI_COMMAND_FAST_BACK;
+
+	ar724x_pci_write(ar724x_pci_localcfg_base, PCI_COMMAND, 4, t);
+	ar724x_pci_write(ar724x_pci_localcfg_base, 0x20, 4, 0x1ff01000);
+	ar724x_pci_write(ar724x_pci_localcfg_base, 0x24, 4, 0x1ff01000);
+
+	t = __raw_readl(base + AR724X_PCI_REG_RESET);
+	if (t != 0x7) {
+		udelay(100000);
+		__raw_writel(0, base + AR724X_PCI_REG_RESET);
+		udelay(100);
+		__raw_writel(4, base + AR724X_PCI_REG_RESET);
+		udelay(100000);
+	}
+
+	if (ar71xx_soc == AR71XX_SOC_AR7240)
+		t = AR724X_PCI_APP_LTSSM_ENABLE;
+	else
+		t = 0x1ffc1;
+	__raw_writel(t, base + AR724X_PCI_REG_APP);
+	/* flush write */
+	(void) __raw_readl(base + AR724X_PCI_REG_APP);
+	udelay(1000);
+
+	t = __raw_readl(base + AR724X_PCI_REG_RESET);
+	if ((t & AR724X_PCI_RESET_LINK_UP) == 0x0) {
+		printk(KERN_WARNING "PCI: no PCIe module found\n");
+		return -ENODEV;
+	}
+
+	if (ar71xx_soc == AR71XX_SOC_AR7241 || ar71xx_soc == AR71XX_SOC_AR7242) {
+		t = __raw_readl(base + AR724X_PCI_REG_APP);
+		t |= BIT(16);
+		__raw_writel(t, base + AR724X_PCI_REG_APP);
+	}
+
+	return 0;
+}
+
+static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *base = ar724x_pci_ctrl_base;
+	u32 pending;
+
+	pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
+		  __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+
+	if (pending & AR724X_PCI_INT_DEV0)
+		generic_handle_irq(AR71XX_PCI_IRQ_DEV0);
+
+	else
+		spurious_interrupt();
+}
+
+static void ar724x_pci_irq_unmask(unsigned int irq)
+{
+	void __iomem *base = ar724x_pci_ctrl_base;
+	u32 t;
+
+	switch (irq) {
+	case AR71XX_PCI_IRQ_DEV0:
+		irq -= AR71XX_PCI_IRQ_BASE;
+
+		t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+		__raw_writel(t | AR724X_PCI_INT_DEV0,
+			     base + AR724X_PCI_REG_INT_MASK);
+		/* flush write */
+		(void) __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+	}
+}
+
+static void ar724x_pci_irq_mask(unsigned int irq)
+{
+	void __iomem *base = ar724x_pci_ctrl_base;
+	u32 t;
+
+	switch (irq) {
+	case AR71XX_PCI_IRQ_DEV0:
+		irq -= AR71XX_PCI_IRQ_BASE;
+
+		t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+		__raw_writel(t & ~AR724X_PCI_INT_DEV0,
+			     base + AR724X_PCI_REG_INT_MASK);
+
+		/* flush write */
+		(void) __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+
+		t = __raw_readl(base + AR724X_PCI_REG_INT_STATUS);
+		__raw_writel(t | AR724X_PCI_INT_DEV0,
+			     base + AR724X_PCI_REG_INT_STATUS);
+
+		/* flush write */
+		(void) __raw_readl(base + AR724X_PCI_REG_INT_STATUS);
+	}
+}
+
+static struct irq_chip ar724x_pci_irq_chip = {
+	.name		= "AR724X PCI ",
+	.mask		= ar724x_pci_irq_mask,
+	.unmask		= ar724x_pci_irq_unmask,
+	.mask_ack	= ar724x_pci_irq_mask,
+};
+
+static void __init ar724x_pci_irq_init(void)
+{
+	void __iomem *base = ar724x_pci_ctrl_base;
+	u32 t;
+	int i;
+
+	t = ar71xx_reset_rr(AR724X_RESET_REG_RESET_MODULE);
+	if (t & (AR724X_RESET_PCIE | AR724X_RESET_PCIE_PHY |
+		 AR724X_RESET_PCIE_PHY_SERIAL)) {
+		return;
+	}
+
+	__raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
+	__raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
+
+	for (i = AR71XX_PCI_IRQ_BASE;
+	     i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		set_irq_chip_and_handler(i, &ar724x_pci_irq_chip,
+					 handle_level_irq);
+	}
+
+	set_irq_chained_handler(AR71XX_CPU_IRQ_IP2, ar724x_pci_irq_handler);
+}
+
+int __init ar724x_pcibios_init(void)
+{
+	int ret = -ENOMEM;
+
+	ar724x_pci_localcfg_base = ioremap_nocache(AR724X_PCI_CRP_BASE,
+						   AR724X_PCI_CRP_SIZE);
+	if (ar724x_pci_localcfg_base == NULL)
+		goto err;
+
+	ar724x_pci_devcfg_base = ioremap_nocache(AR724X_PCI_CFG_BASE,
+						 AR724X_PCI_CFG_SIZE);
+	if (ar724x_pci_devcfg_base == NULL)
+		goto err_unmap_localcfg;
+
+	ar724x_pci_ctrl_base = ioremap_nocache(AR724X_PCI_CTRL_BASE,
+					       AR724X_PCI_CTRL_SIZE);
+	if (ar724x_pci_ctrl_base == NULL)
+		goto err_unmap_devcfg;
+
+	ar724x_pci_reset();
+	ret = ar724x_pci_setup();
+	if (ret)
+		goto err_unmap_ctrl;
+
+	ar724x_pci_fixup_enable = 1;
+	ar724x_pci_irq_init();
+	register_pci_controller(&ar724x_pci_controller);
+
+	return 0;
+
+ err_unmap_ctrl:
+	iounmap(ar724x_pci_ctrl_base);
+  err_unmap_devcfg:
+	iounmap(ar724x_pci_devcfg_base);
+ err_unmap_localcfg:
+	iounmap(ar724x_pci_localcfg_base);
+ err:
+	return ret;
+}
diff -Nur linux-2.6.35.7.orig/drivers/char/Kconfig linux-2.6.35.7/drivers/char/Kconfig
--- linux-2.6.35.7.orig/drivers/char/Kconfig	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/char/Kconfig	2010-10-14 20:27:59.828101117 +0200
@@ -1032,6 +1032,14 @@
 
 	  If compiled as a module, it will be called cs5535_gpio.
 
+config GPIO_DEVICE
+	tristate "GPIO device support"
+	depends on GENERIC_GPIO
+	help
+	  Say Y to enable Linux GPIO device support.  This allows control of
+	  GPIO pins using a character device
+
+
 config RAW_DRIVER
 	tristate "RAW driver (/dev/raw/rawN)"
 	depends on BLOCK
diff -Nur linux-2.6.35.7.orig/drivers/char/Kconfig.orig linux-2.6.35.7/drivers/char/Kconfig.orig
--- linux-2.6.35.7.orig/drivers/char/Kconfig.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/char/Kconfig.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,1133 @@
+#
+# Character device configuration
+#
+
+menu "Character devices"
+
+config VT
+	bool "Virtual terminal" if EMBEDDED
+	depends on !S390
+	select INPUT
+	default y
+	---help---
+	  If you say Y here, you will get support for terminal devices with
+	  display and keyboard devices. These are called "virtual" because you
+	  can run several virtual terminals (also called virtual consoles) on
+	  one physical terminal. This is rather useful, for example one
+	  virtual terminal can collect system messages and warnings, another
+	  one can be used for a text-mode user session, and a third could run
+	  an X session, all in parallel. Switching between virtual terminals
+	  is done with certain key combinations, usually Alt-<function key>.
+
+	  The setterm command ("man setterm") can be used to change the
+	  properties (such as colors or beeping) of a virtual terminal. The
+	  man page console_codes(4) ("man console_codes") contains the special
+	  character sequences that can be used to change those properties
+	  directly. The fonts used on virtual terminals can be changed with
+	  the setfont ("man setfont") command and the key bindings are defined
+	  with the loadkeys ("man loadkeys") command.
+
+	  You need at least one virtual terminal device in order to make use
+	  of your keyboard and monitor. Therefore, only people configuring an
+	  embedded system would want to say N here in order to save some
+	  memory; the only way to log into such a system is then via a serial
+	  or network connection.
+
+	  If unsure, say Y, or else you won't be able to do much with your new
+	  shiny Linux system :-)
+
+config CONSOLE_TRANSLATIONS
+	depends on VT
+	default y
+	bool "Enable character translations in console" if EMBEDDED
+	---help---
+	  This enables support for font mapping and Unicode translation
+	  on virtual consoles.
+
+config VT_CONSOLE
+	bool "Support for console on virtual terminal" if EMBEDDED
+	depends on VT
+	default y
+	---help---
+	  The system console is the device which receives all kernel messages
+	  and warnings and which allows logins in single user mode. If you
+	  answer Y here, a virtual terminal (the device used to interact with
+	  a physical terminal) can be used as system console. This is the most
+	  common mode of operations, so you should say Y here unless you want
+	  the kernel messages be output only to a serial port (in which case
+	  you should say Y to "Console on serial port", below).
+
+	  If you do say Y here, by default the currently visible virtual
+	  terminal (/dev/tty0) will be used as system console. You can change
+	  that with a kernel command line option such as "console=tty3" which
+	  would use the third virtual terminal as system console. (Try "man
+	  bootparam" or see the documentation of your boot loader (lilo or
+	  loadlin) about how to pass options to the kernel at boot time.)
+
+	  If unsure, say Y.
+
+config HW_CONSOLE
+	bool
+	depends on VT && !S390 && !UML
+	default y
+
+config VT_HW_CONSOLE_BINDING
+       bool "Support for binding and unbinding console drivers"
+       depends on HW_CONSOLE
+       default n
+       ---help---
+         The virtual terminal is the device that interacts with the physical
+         terminal through console drivers. On these systems, at least one
+         console driver is loaded. In other configurations, additional console
+         drivers may be enabled, such as the framebuffer console. If more than
+         1 console driver is enabled, setting this to 'y' will allow you to
+         select the console driver that will serve as the backend for the
+         virtual terminals.
+
+	 See <file:Documentation/console/console.txt> for more
+	 information. For framebuffer console users, please refer to
+	 <file:Documentation/fb/fbcon.txt>.
+
+config DEVKMEM
+	bool "/dev/kmem virtual device support"
+	default y
+	help
+	  Say Y here if you want to support the /dev/kmem device. The
+	  /dev/kmem device is rarely used, but can be used for certain
+	  kind of kernel debugging operations.
+	  When in doubt, say "N".
+
+config BFIN_JTAG_COMM
+	tristate "Blackfin JTAG Communication"
+	depends on BLACKFIN
+	help
+	  Add support for emulating a TTY device over the Blackfin JTAG.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+	bool "Console on Blackfin JTAG"
+	depends on BFIN_JTAG_COMM=y
+
+config SERIAL_NONSTANDARD
+	bool "Non-standard serial port support"
+	depends on HAS_IOMEM
+	---help---
+	  Say Y here if you have any non-standard serial boards -- boards
+	  which aren't supported using the standard "dumb" serial driver.
+	  This includes intelligent serial boards such as Cyclades,
+	  Digiboards, etc. These are usually used for systems that need many
+	  serial ports because they serve many terminals or dial-in
+	  connections.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about non-standard serial boards.
+
+	  Most people can say N here.
+
+config COMPUTONE
+	tristate "Computone IntelliPort Plus serial support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	---help---
+	  This driver supports the entire family of Intelliport II/Plus
+	  controllers with the exception of the MicroChannel controllers and
+	  products previous to the Intelliport II. These are multiport cards,
+	  which give you many serial ports. You would need something like this
+	  to connect more than two modems to your Linux box, for instance in
+	  order to become a dial-in server. If you have a card like that, say
+	  Y here and read <file:Documentation/serial/computone.txt>.
+
+	  To compile this driver as module, choose M here: the
+	  module will be called ip2.
+
+config ROCKETPORT
+	tristate "Comtrol RocketPort support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	help
+	  This driver supports Comtrol RocketPort and RocketModem PCI boards.   
+          These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+          modems.  For information about the RocketPort/RocketModem  boards
+          and this driver read <file:Documentation/serial/rocket.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rocket.
+
+	  If you want to compile this driver into the kernel, say Y here.  If
+          you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+
+config CYCLADES
+	tristate "Cyclades async mux support"
+	depends on SERIAL_NONSTANDARD && (PCI || ISA)
+	select FW_LOADER
+	---help---
+	  This driver supports Cyclades Z and Y multiserial boards.
+	  You would need something like this to connect more than two modems to
+	  your Linux box, for instance in order to become a dial-in server.
+
+	  For information about the Cyclades-Z card, read
+	  <file:Documentation/serial/README.cycladesZ>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyclades.
+
+	  If you haven't heard about it, it's safe to say N.
+
+config CYZ_INTR
+	bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && CYCLADES
+	help
+	  The Cyclades-Z family of multiport cards allows 2 (two) driver op
+	  modes: polling and interrupt. In polling mode, the driver will check
+	  the status of the Cyclades-Z ports every certain amount of time
+	  (which is called polling cycle and is configurable). In interrupt
+	  mode, it will use an interrupt line (IRQ) in order to check the
+	  status of the Cyclades-Z ports. The default op mode is polling. If
+	  unsure, say N.
+
+config DIGIEPCA
+	tristate "Digiboard Intelligent Async Support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	---help---
+	  This is a driver for Digi International's Xx, Xeve, and Xem series
+	  of cards which provide multiple serial ports. You would need
+	  something like this to connect more than two modems to your Linux
+	  box, for instance in order to become a dial-in server. This driver
+	  supports the original PC (ISA) boards as well as PCI, and EISA. If
+	  you have a card like this, say Y here and read the file
+	  <file:Documentation/serial/digiepca.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called epca.
+
+config MOXA_INTELLIO
+	tristate "Moxa Intellio support"
+	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+	select FW_LOADER
+	help
+	  Say Y here if you have a Moxa Intellio multiport serial card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called moxa.
+
+config MOXA_SMARTIO
+	tristate "Moxa SmartIO support v. 2.0"
+	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+	help
+	  Say Y here if you have a Moxa SmartIO multiport serial card and/or
+	  want to help develop a new version of this driver.
+
+	  This is upgraded (1.9.1) driver from original Moxa drivers with
+	  changes finally resulting in PCI probing.
+
+	  This driver can also be built as a module. The module will be called
+	  mxser. If you want to do that, say M here.
+
+config ISI
+	tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
+	depends on SERIAL_NONSTANDARD && PCI
+	select FW_LOADER
+	help
+	  This is a driver for the Multi-Tech cards which provide several
+	  serial ports.  The driver is experimental and can currently only be
+	  built as a module. The module will be called isicom.
+	  If you want to do that, choose M here.
+
+config SYNCLINK
+	tristate "Microgate SyncLink card support"
+	depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+	help
+	  Provides support for the SyncLink ISA and PCI multiprotocol serial
+	  adapters. These adapters support asynchronous and HDLC bit
+	  synchronous communication up to 10Mbps (PCI adapter).
+
+	  This driver can only be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called synclink.  If you want to do that, say M
+	  here.
+
+config SYNCLINKMP
+	tristate "SyncLink Multiport support"
+	depends on SERIAL_NONSTANDARD && PCI
+	help
+	  Enable support for the SyncLink Multiport (2 or 4 ports)
+	  serial adapter, running asynchronous and HDLC communications up
+	  to 2.048Mbps. Each ports is independently selectable for
+	  RS-232, V.35, RS-449, RS-530, and X.21
+
+	  This driver may be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called synclinkmp.  If you want to do that, say M
+	  here.
+
+config SYNCLINK_GT
+	tristate "SyncLink GT/AC support"
+	depends on SERIAL_NONSTANDARD && PCI
+	help
+	  Support for SyncLink GT and SyncLink AC families of
+	  synchronous and asynchronous serial adapters
+	  manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
+config N_HDLC
+	tristate "HDLC line discipline support"
+	depends on SERIAL_NONSTANDARD
+	help
+	  Allows synchronous HDLC communications with tty device drivers that
+	  support synchronous HDLC such as the Microgate SyncLink adapter.
+
+	  This driver can be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called n_hdlc. If you want to do that, say M
+	  here.
+
+config N_GSM
+	tristate "GSM MUX line discipline support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on NET
+	help
+	  This line discipline provides support for the GSM MUX protocol and
+	  presents the mux as a set of 61 individual tty devices.
+
+config RISCOM8
+	tristate "SDL RISCom/8 card support"
+	depends on SERIAL_NONSTANDARD
+	help
+	  This is a driver for the SDL Communications RISCom/8 multiport card,
+	  which gives you many serial ports. You would need something like
+	  this to connect more than two modems to your Linux box, for instance
+	  in order to become a dial-in server. If you have a card like that,
+	  say Y here and read the file <file:Documentation/serial/riscom8.txt>.
+
+	  Also it's possible to say M here and compile this driver as kernel
+	  loadable module; the module will be called riscom8.
+
+config SPECIALIX
+	tristate "Specialix IO8+ card support"
+	depends on SERIAL_NONSTANDARD
+	help
+	  This is a driver for the Specialix IO8+ multiport card (both the
+	  ISA and the PCI version) which gives you many serial ports. You
+	  would need something like this to connect more than two modems to
+	  your Linux box, for instance in order to become a dial-in server.
+
+	  If you have a card like that, say Y here and read the file
+	  <file:Documentation/serial/specialix.txt>. Also it's possible to say
+	  M here and compile this driver as kernel loadable module which will be
+	  called specialix.
+
+config SX
+	tristate "Specialix SX (and SI) card support"
+	depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
+	help
+	  This is a driver for the SX and SI multiport serial cards.
+	  Please read the file <file:Documentation/serial/sx.txt> for details.
+
+	  This driver can only be built as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called sx. If you want to do that, say M here.
+
+config RIO
+	tristate "Specialix RIO system support"
+	depends on SERIAL_NONSTANDARD && BROKEN
+	help
+	  This is a driver for the Specialix RIO, a smart serial card which
+	  drives an outboard box that can support up to 128 ports.  Product
+	  information is at <http://www.perle.com/support/documentation.html#multiport>.
+	  There are both ISA and PCI versions.
+
+config RIO_OLDPCI
+	bool "Support really old RIO/PCI cards"
+	depends on RIO
+	help
+	  Older RIO PCI cards need some initialization-time configuration to
+	  determine the IRQ and some control addresses.  If you have a RIO and
+	  this doesn't seem to work, try setting this to Y.
+
+config STALDRV
+	bool "Stallion multiport serial support"
+	depends on SERIAL_NONSTANDARD
+	help
+	  Stallion cards give you many serial ports.  You would need something
+	  like this to connect more than two modems to your Linux box, for
+	  instance in order to become a dial-in server.  If you say Y here,
+	  you will be asked for your specific card model in the next
+	  questions.  Make sure to read <file:Documentation/serial/stallion.txt>
+	  in this case.  If you have never heard about all this, it's safe to
+	  say N.
+
+config STALLION
+	tristate "Stallion EasyIO or EC8/32 support"
+	depends on STALDRV && (ISA || EISA || PCI)
+	help
+	  If you have an EasyIO or EasyConnection 8/32 multiport Stallion
+	  card, then this is for you; say Y.  Make sure to read
+	  <file:Documentation/serial/stallion.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stallion.
+
+config ISTALLION
+	tristate "Stallion EC8/64, ONboard, Brumby support"
+	depends on STALDRV && (ISA || EISA || PCI)
+	help
+	  If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
+	  serial multiport card, say Y here. Make sure to read
+	  <file:Documentation/serial/stallion.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called istallion.
+
+config NOZOMI
+	tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
+	depends on PCI && EXPERIMENTAL
+	help
+	  If you have a HSDPA driver Broadband Wireless Data Card -
+	  Globe Trotter PCMCIA card, say Y here.
+
+	  To compile this driver as a module, choose M here, the module
+	  will be called nozomi.
+
+config A2232
+	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && ZORRO && BROKEN
+	---help---
+	  This option supports the 2232 7-port serial card shipped with the
+	  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
+	  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
+	  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
+	  ports were connected with 8 pin DIN connectors on the card bracket,
+	  for which 8 pin to DB25 adapters were supplied. The card also had
+	  jumpers internally to toggle various pinning configurations.
+
+	  This driver can be built as a module; but then "generic_serial"
+	  will also be built as a module. This has to be loaded before
+	  "ser_a2232". If you want to do this, answer M here.
+
+config SGI_SNSC
+	bool "SGI Altix system controller communication support"
+	depends on (IA64_SGI_SN2 || IA64_GENERIC)
+	help
+	  If you have an SGI Altix and you want to enable system
+	  controller communication from user space (you want this!),
+	  say Y.  Otherwise, say N.
+
+config SGI_TIOCX
+       bool "SGI TIO CX driver support"
+       depends on (IA64_SGI_SN2 || IA64_GENERIC)
+       help
+         If you have an SGI Altix and you have fpga devices attached
+         to your TIO, say Y here, otherwise say N.
+
+config SGI_MBCS
+       tristate "SGI FPGA Core Services driver support"
+       depends on SGI_TIOCX
+       help
+         If you have an SGI Altix with an attached SABrick
+         say Y or M here, otherwise say N.
+
+source "drivers/serial/Kconfig"
+
+config UNIX98_PTYS
+	bool "Unix98 PTY support" if EMBEDDED
+	default y
+	---help---
+	  A pseudo terminal (PTY) is a software device consisting of two
+	  halves: a master and a slave. The slave device behaves identical to
+	  a physical terminal; the master device is used by a process to
+	  read data from and write data to the slave, thereby emulating a
+	  terminal. Typical programs for the master side are telnet servers
+	  and xterms.
+
+	  Linux has traditionally used the BSD-like names /dev/ptyxx for
+	  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+	  has a number of problems. The GNU C library glibc 2.1 and later,
+	  however, supports the Unix98 naming standard: in order to acquire a
+	  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+	  terminal is then made available to the process and the pseudo
+	  terminal slave can be accessed as /dev/pts/<number>. What was
+	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+	  All modern Linux systems use the Unix98 ptys.  Say Y unless
+	  you're on an embedded system and want to conserve memory.
+
+config DEVPTS_MULTIPLE_INSTANCES
+	bool "Support multiple instances of devpts"
+	depends on UNIX98_PTYS
+	default n
+	---help---
+	  Enable support for multiple instances of devpts filesystem.
+	  If you want to have isolated PTY namespaces (eg: in containers),
+	  say Y here.  Otherwise, say N. If enabled, each mount of devpts
+	  filesystem with the '-o newinstance' option will create an
+	  independent PTY namespace.
+
+config LEGACY_PTYS
+	bool "Legacy (BSD) PTY support"
+	default y
+	---help---
+	  A pseudo terminal (PTY) is a software device consisting of two
+	  halves: a master and a slave. The slave device behaves identical to
+	  a physical terminal; the master device is used by a process to
+	  read data from and write data to the slave, thereby emulating a
+	  terminal. Typical programs for the master side are telnet servers
+	  and xterms.
+
+	  Linux has traditionally used the BSD-like names /dev/ptyxx
+	  for masters and /dev/ttyxx for slaves of pseudo
+	  terminals. This scheme has a number of problems, including
+	  security.  This option enables these legacy devices; on most
+	  systems, it is safe to say N.
+
+
+config LEGACY_PTY_COUNT
+	int "Maximum number of legacy PTY in use"
+	depends on LEGACY_PTYS
+	range 0 256
+	default "256"
+	---help---
+	  The maximum number of legacy PTYs that can be used at any one time.
+	  The default is 256, and should be more than enough.  Embedded
+	  systems may want to reduce this to save memory.
+
+	  When not in use, each legacy PTY occupies 12 bytes on 32-bit
+	  architectures and 24 bytes on 64-bit architectures.
+
+config BRIQ_PANEL
+	tristate 'Total Impact briQ front panel driver'
+	depends on PPC_CHRP
+	---help---
+	  The briQ is a small footprint CHRP computer with a frontpanel VFD, a
+	  tristate led and two switches. It is the size of a CDROM drive.
+
+	  If you have such one and want anything showing on the VFD then you
+	  must answer Y here.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called briq_panel.
+
+	  It's safe to say N here.
+
+config BFIN_OTP
+	tristate "Blackfin On-Chip OTP Memory Support"
+	depends on BLACKFIN && (BF51x || BF52x || BF54x)
+	default y
+	help
+	  If you say Y here, you will get support for a character device
+	  interface into the One Time Programmable memory pages that are
+	  stored on the Blackfin processor.  This will not get you access
+	  to the secure memory pages however.  You will need to write your
+	  own secure code and reader for that.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bfin-otp.
+
+	  If unsure, it is safe to say Y.
+
+config BFIN_OTP_WRITE_ENABLE
+	bool "Enable writing support of OTP pages"
+	depends on BFIN_OTP
+	default n
+	help
+	  If you say Y here, you will enable support for writing of the
+	  OTP pages.  This is dangerous by nature as you can only program
+	  the pages once, so only enable this option when you actually
+	  need it so as to not inadvertently clobber data.
+
+	  If unsure, say N.
+
+config PRINTER
+	tristate "Parallel printer support"
+	depends on PARPORT
+	---help---
+	  If you intend to attach a printer to the parallel port of your Linux
+	  box (as opposed to using a serial printer; if the connector at the
+	  printer has 9 or 25 holes ["female"], then it's serial), say Y.
+	  Also read the Printing-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  It is possible to share one parallel port among several devices
+	  (e.g. printer and ZIP drive) and it is safe to compile the
+	  corresponding drivers into the kernel.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/parport.txt>.  The module will be called lp.
+
+	  If you have several parallel ports, you can specify which ports to
+	  use with the "lp" kernel command line option.  (Try "man bootparam"
+	  or see the documentation of your boot loader (lilo or loadlin) about
+	  how to pass options to the kernel at boot time.)  The syntax of the
+	  "lp" command line option can be found in <file:drivers/char/lp.c>.
+
+	  If you have more than 8 printers, you need to increase the LP_NO
+	  macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+config LP_CONSOLE
+	bool "Support for console on line printer"
+	depends on PRINTER
+	---help---
+	  If you want kernel messages to be printed out as they occur, you
+	  can have a console on the printer. This option adds support for
+	  doing that; to actually get it to happen you need to pass the
+	  option "console=lp0" to the kernel at boot time.
+
+	  If the printer is out of paper (or off, or unplugged, or too
+	  busy..) the kernel will stall until the printer is ready again.
+	  By defining CONSOLE_LP_STRICT to 0 (at your own risk) you
+	  can make the kernel continue when this happens,
+	  but it'll lose the kernel messages.
+
+	  If unsure, say N.
+
+config PPDEV
+	tristate "Support for user-space parallel port device drivers"
+	depends on PARPORT
+	---help---
+	  Saying Y to this adds support for /dev/parport device nodes.  This
+	  is needed for programs that want portable access to the parallel
+	  port, for instance deviceid (which displays Plug-and-Play device
+	  IDs).
+
+	  This is the parallel port equivalent of SCSI generic support (sg).
+	  It is safe to say N to this -- it is not needed for normal printing
+	  or parallel port CD-ROM/disk support.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ppdev.
+
+	  If unsure, say N.
+
+config HVC_DRIVER
+	bool
+	help
+	  Generic "hypervisor virtual console" infrastructure for various
+	  hypervisors (pSeries, iSeries, Xen, lguest).
+	  It will automatically be selected if one of the back-end console drivers
+	  is selected.
+
+config HVC_IRQ
+	bool
+
+config HVC_CONSOLE
+	bool "pSeries Hypervisor Virtual Console support"
+	depends on PPC_PSERIES
+	select HVC_DRIVER
+	select HVC_IRQ
+	help
+	  pSeries machines when partitioned support a hypervisor virtual
+	  console. This driver allows each pSeries partition to have a console
+	  which is accessed via the HMC.
+
+config HVC_ISERIES
+	bool "iSeries Hypervisor Virtual Console support"
+	depends on PPC_ISERIES
+	default y
+	select HVC_DRIVER
+	select HVC_IRQ
+	select VIOPATH
+	help
+	  iSeries machines support a hypervisor virtual console.
+
+config HVC_RTAS
+	bool "IBM RTAS Console support"
+	depends on PPC_RTAS
+	select HVC_DRIVER
+	help
+	  IBM Console device driver which makes use of RTAS
+
+config HVC_BEAT
+	bool "Toshiba's Beat Hypervisor Console support"
+	depends on PPC_CELLEB
+	select HVC_DRIVER
+	help
+	  Toshiba's Cell Reference Set Beat Console device driver
+
+config HVC_IUCV
+	bool "z/VM IUCV Hypervisor console support (VM only)"
+	depends on S390
+	select HVC_DRIVER
+	select IUCV
+	default y
+	help
+	  This driver provides a Hypervisor console (HVC) back-end to access
+	  a Linux (console) terminal via a z/VM IUCV communication path.
+
+config HVC_XEN
+	bool "Xen Hypervisor Console support"
+	depends on XEN
+	select HVC_DRIVER
+	select HVC_IRQ
+	default y
+	help
+	  Xen virtual console device driver
+
+config HVC_UDBG
+       bool "udbg based fake hypervisor console"
+       depends on PPC && EXPERIMENTAL
+       select HVC_DRIVER
+       default n
+
+config VIRTIO_CONSOLE
+	tristate "Virtio console"
+	depends on VIRTIO
+	select HVC_DRIVER
+	help
+	  Virtio console for use with lguest and other hypervisors.
+
+	  Also serves as a general-purpose serial device for data
+	  transfer between the guest and host.  Character devices at
+	  /dev/vportNpn will be created when corresponding ports are
+	  found, where N is the device number and n is the port number
+	  within that device.  If specified by the host, a sysfs
+	  attribute called 'name' will be populated with a name for
+	  the port which can be used by udev scripts to create a
+	  symlink to the device.
+
+config HVCS
+	tristate "IBM Hypervisor Virtual Console Server support"
+	depends on PPC_PSERIES && HVC_CONSOLE
+	help
+	  Partitionable IBM Power5 ppc64 machines allow hosting of
+	  firmware virtual consoles from one Linux partition by
+	  another Linux partition.  This driver allows console data
+	  from Linux partitions to be accessed through TTY device
+	  interfaces in the device tree of a Linux partition running
+	  this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hvcs.  Additionally, this module
+	  will depend on arch specific APIs exported from hvcserver.ko
+	  which will also be compiled when this driver is built as a
+	  module.
+
+config IBM_BSR
+	tristate "IBM POWER Barrier Synchronization Register support"
+	depends on PPC_PSERIES
+	help
+	  This devices exposes a hardware mechanism for fast synchronization
+	  of threads across a large system which avoids bouncing a cacheline
+	  between several cores on a system
+
+source "drivers/char/ipmi/Kconfig"
+
+config DS1620
+	tristate "NetWinder thermometer support"
+	depends on ARCH_NETWINDER
+	help
+	  Say Y here to include support for the thermal management hardware
+	  found in the NetWinder. This driver allows the user to control the
+	  temperature set points and to read the current temperature.
+
+	  It is also possible to say M here to build it as a module (ds1620)
+	  It is recommended to be used on a NetWinder, but it is not a
+	  necessity.
+
+config NWBUTTON
+	tristate "NetWinder Button"
+	depends on ARCH_NETWINDER
+	---help---
+	  If you say Y here and create a character device node /dev/nwbutton
+	  with major and minor numbers 10 and 158 ("man mknod"), then every
+	  time the orange button is pressed a number of times, the number of
+	  times the button was pressed will be written to that device.
+
+	  This is most useful for applications, as yet unwritten, which
+	  perform actions based on how many times the button is pressed in a
+	  row.
+
+	  Do not hold the button down for too long, as the driver does not
+	  alter the behaviour of the hardware reset circuitry attached to the
+	  button; it will still execute a hard reset if the button is held
+	  down for longer than approximately five seconds.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nwbutton.
+
+	  Most people will answer Y to this question and "Reboot Using Button"
+	  below to be able to initiate a system shutdown from the button.
+
+config NWBUTTON_REBOOT
+	bool "Reboot Using Button"
+	depends on NWBUTTON
+	help
+	  If you say Y here, then you will be able to initiate a system
+	  shutdown and reboot by pressing the orange button a number of times.
+	  The number of presses to initiate the shutdown is two by default,
+	  but this can be altered by modifying the value of NUM_PRESSES_REBOOT
+	  in nwbutton.h and recompiling the driver or, if you compile the
+	  driver as a module, you can specify the number of presses at load
+	  time with "insmod button reboot_count=<something>".
+
+config NWFLASH
+	tristate "NetWinder flash support"
+	depends on ARCH_NETWINDER
+	---help---
+	  If you say Y here and create a character device /dev/flash with
+	  major 10 and minor 160 you can manipulate the flash ROM containing
+	  the NetWinder firmware. Be careful as accidentally overwriting the
+	  flash contents can render your computer unbootable. On no account
+	  allow random users access to this device. :-)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nwflash.
+
+	  If you're not sure, say N.
+
+source "drivers/char/hw_random/Kconfig"
+
+config NVRAM
+	tristate "/dev/nvram support"
+	depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM
+	---help---
+	  If you say Y here and create a character special file /dev/nvram
+	  with major number 10 and minor number 144 using mknod ("man mknod"),
+	  you get read and write access to the extra bytes of non-volatile
+	  memory in the real time clock (RTC), which is contained in every PC
+	  and most Ataris.  The actual number of bytes varies, depending on the
+	  nvram in the system, but is usually 114 (128-14 for the RTC).
+
+	  This memory is conventionally called "CMOS RAM" on PCs and "NVRAM"
+	  on Ataris. /dev/nvram may be used to view settings there, or to
+	  change them (with some utility). It could also be used to frequently
+	  save a few bits of very important data that may not be lost over
+	  power-off and for which writing to disk is too insecure. Note
+	  however that most NVRAM space in a PC belongs to the BIOS and you
+	  should NEVER idly tamper with it. See Ralf Brown's interrupt list
+	  for a guide to the use of CMOS bytes by your BIOS.
+
+	  On Atari machines, /dev/nvram is always configured and does not need
+	  to be selected.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvram.
+
+#
+# These legacy RTC drivers just cause too many conflicts with the generic
+# RTC framework ... let's not even try to coexist any more.
+#
+if RTC_LIB=n
+
+config RTC
+	tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
+	depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
+			&& !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN
+	---help---
+	  If you say Y here and create a character special file /dev/rtc with
+	  major number 10 and minor number 135 using mknod ("man mknod"), you
+	  will get access to the real time clock (or hardware clock) built
+	  into your computer.
+
+	  Every PC has such a clock built in. It can be used to generate
+	  signals from as low as 1Hz up to 8192Hz, and can also be used
+	  as a 24 hour alarm. It reports status information via the file
+	  /proc/driver/rtc and its behaviour is set by various ioctls on
+	  /dev/rtc.
+
+	  If you run Linux on a multiprocessor machine and said Y to
+	  "Symmetric Multi Processing" above, you should say Y here to read
+	  and set the RTC in an SMP compatible fashion.
+
+	  If you think you have a use for such a device (such as periodic data
+	  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+	  for details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc.
+
+config JS_RTC
+	tristate "Enhanced Real Time Clock Support"
+	depends on SPARC32 && PCI
+	---help---
+	  If you say Y here and create a character special file /dev/rtc with
+	  major number 10 and minor number 135 using mknod ("man mknod"), you
+	  will get access to the real time clock (or hardware clock) built
+	  into your computer.
+
+	  Every PC has such a clock built in. It can be used to generate
+	  signals from as low as 1Hz up to 8192Hz, and can also be used
+	  as a 24 hour alarm. It reports status information via the file
+	  /proc/driver/rtc and its behaviour is set by various ioctls on
+	  /dev/rtc.
+
+	  If you think you have a use for such a device (such as periodic data
+	  sampling), then say Y here, and read <file:Documentation/rtc.txt>
+	  for details.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called js-rtc.
+
+config GEN_RTC
+	tristate "Generic /dev/rtc emulation"
+	depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN
+	---help---
+	  If you say Y here and create a character special file /dev/rtc with
+	  major number 10 and minor number 135 using mknod ("man mknod"), you
+	  will get access to the real time clock (or hardware clock) built
+	  into your computer.
+
+	  It reports status information via the file /proc/driver/rtc and its
+	  behaviour is set by various ioctls on /dev/rtc. If you enable the
+	  "extended RTC operation" below it will also provide an emulation
+	  for RTC_UIE which is required by some programs and may improve
+	  precision in some cases.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called genrtc.
+
+config GEN_RTC_X
+	bool "Extended RTC operation"
+	depends on GEN_RTC
+	help
+	  Provides an emulation for RTC_UIE which is required by some programs
+	  and may improve precision of the generic RTC support in some cases.
+
+config EFI_RTC
+	bool "EFI Real Time Clock Services"
+	depends on IA64
+
+config DS1302
+	tristate "DS1302 RTC support"
+	depends on M32R && (PLAT_M32700UT || PLAT_OPSPUT)
+	help
+	  If you say Y here and create a character special file /dev/rtc with
+	  major number 121 and minor number 0 using mknod ("man mknod"), you
+	  will get access to the real time clock (or hardware clock) built
+	  into your computer.
+
+endif # RTC_LIB
+
+config DTLK
+	tristate "Double Talk PC internal speech card support"
+	depends on ISA
+	help
+	  This driver is for the DoubleTalk PC, a speech synthesizer
+	  manufactured by RC Systems (<http://www.rcsys.com/>).  It is also
+	  called the `internal DoubleTalk'.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dtlk.
+
+config XILINX_HWICAP
+	tristate "Xilinx HWICAP Support"
+	depends on XILINX_VIRTEX || MICROBLAZE
+	help
+	  This option enables support for Xilinx Internal Configuration
+	  Access Port (ICAP) driver.  The ICAP is used on Xilinx Virtex
+	  FPGA platforms to partially reconfigure the FPGA at runtime.
+
+	  If unsure, say N.
+
+config R3964
+	tristate "Siemens R3964 line discipline"
+	---help---
+	  This driver allows synchronous communication with devices using the
+	  Siemens R3964 packet protocol. Unless you are dealing with special
+	  hardware like PLCs, you are unlikely to need this.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called n_r3964.
+
+	  If unsure, say N.
+
+config APPLICOM
+	tristate "Applicom intelligent fieldbus card support"
+	depends on PCI
+	---help---
+	  This driver provides the kernel-side support for the intelligent
+	  fieldbus cards made by Applicom International. More information
+	  about these cards can be found on the WWW at the address
+	  <http://www.applicom-int.com/>, or by email from David Woodhouse
+	  <dwmw2@infradead.org>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called applicom.
+
+	  If unsure, say N.
+
+config SONYPI
+	tristate "Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && X86 && PCI && INPUT && !64BIT
+	---help---
+	  This driver enables access to the Sony Programmable I/O Control
+	  Device which can be found in many (all ?) Sony Vaio laptops.
+
+	  If you have one of those laptops, read
+	  <file:Documentation/laptops/sonypi.txt>, and say Y or M here.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sonypi.
+
+config GPIO_TB0219
+	tristate "TANBAC TB0219 GPIO support"
+	depends on TANBAC_TB022X
+	select GPIO_VR41XX
+
+source "drivers/char/pcmcia/Kconfig"
+
+config MWAVE
+	tristate "ACP Modem (Mwave) support"
+	depends on X86
+	select SERIAL_8250
+	---help---
+	  The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
+	  kernel driver and a user level application. Together these components
+	  support direct attachment to public switched telephone networks (PSTNs)
+	  and support selected world wide countries.
+
+	  This version of the ACP Modem driver supports the IBM Thinkpad 600E,
+	  600, and 770 that include on board ACP modem hardware.
+
+	  The modem also supports the standard communications port interface
+	  (ttySx) and is compatible with the Hayes AT Command Set.
+
+	  The user level application needed to use this driver can be found at
+	  the IBM Linux Technology Center (LTC) web site:
+	  <http://www.ibm.com/linux/ltc/>.
+
+	  If you own one of the above IBM Thinkpads which has the Mwave chipset
+	  in it, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mwave.
+
+config SCx200_GPIO
+	tristate "NatSemi SCx200 GPIO Support"
+	depends on SCx200
+	select NSC_GPIO
+	help
+	  Give userspace access to the GPIO pins on the National
+	  Semiconductor SCx200 processors.
+
+	  If compiled as a module, it will be called scx200_gpio.
+
+config PC8736x_GPIO
+	tristate "NatSemi PC8736x GPIO Support"
+	depends on X86
+	default SCx200_GPIO	# mostly N
+	select NSC_GPIO		# needed for support routines
+	help
+	  Give userspace access to the GPIO pins on the National
+	  Semiconductor PC-8736x (x=[03456]) SuperIO chip.  The chip
+	  has multiple functional units, inc several managed by
+	  hwmon/pc87360 driver.  Tested with PC-87366
+
+	  If compiled as a module, it will be called pc8736x_gpio.
+
+config NSC_GPIO
+	tristate "NatSemi Base GPIO Support"
+	depends on X86_32
+	# selected by SCx200_GPIO and PC8736x_GPIO
+	# what about 2 selectors differing: m != y
+	help
+	  Common support used (and needed) by scx200_gpio and
+	  pc8736x_gpio drivers.  If those drivers are built as
+	  modules, this one will be too, named nsc_gpio
+
+config CS5535_GPIO
+	tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
+	depends on X86_32
+	help
+	  Give userspace access to the GPIO pins on the AMD CS5535 and
+	  CS5536 Geode companion devices.
+
+	  If compiled as a module, it will be called cs5535_gpio.
+
+config RAW_DRIVER
+	tristate "RAW driver (/dev/raw/rawN)"
+	depends on BLOCK
+	help
+	  The raw driver permits block devices to be bound to /dev/raw/rawN.
+	  Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
+	  See the raw(8) manpage for more details.
+
+          Applications should preferably open the device (eg /dev/hda1)
+          with the O_DIRECT flag.
+
+config MAX_RAW_DEVS
+	int "Maximum number of RAW devices to support (1-8192)"
+	depends on RAW_DRIVER
+	default "256"
+	help
+	  The maximum number of RAW devices that are supported.
+	  Default is 256. Increase this number in case you need lots of
+	  raw devices.
+
+config HPET
+	bool "HPET - High Precision Event Timer" if (X86 || IA64)
+	default n
+	depends on ACPI
+	help
+	  If you say Y here, you will have a miscdevice named "/dev/hpet/".  Each
+	  open selects one of the timers supported by the HPET.  The timers are
+	  non-periodic and/or periodic.
+
+config HPET_MMAP
+	bool "Allow mmap of HPET"
+	default y
+	depends on HPET
+	help
+	  If you say Y here, user applications will be able to mmap
+	  the HPET registers.
+
+	  In some hardware implementations, the page containing HPET
+	  registers may also contain other things that shouldn't be
+	  exposed to the user.  If this applies to your hardware,
+	  say N here.
+
+config HANGCHECK_TIMER
+	tristate "Hangcheck timer"
+	depends on X86 || IA64 || PPC64 || S390
+	help
+	  The hangcheck-timer module detects when the system has gone
+	  out to lunch past a certain margin.  It can reboot the system
+	  or merely print a warning.
+
+config MMTIMER
+	tristate "MMTIMER Memory mapped RTC for SGI Altix"
+	depends on IA64_GENERIC || IA64_SGI_SN2
+	default y
+	help
+	  The mmtimer device allows direct userspace access to the
+	  Altix system timer.
+
+config UV_MMTIMER
+	tristate "UV_MMTIMER Memory mapped RTC for SGI UV"
+	depends on X86_UV
+	default m
+	help
+	  The uv_mmtimer device allows direct userspace access to the
+	  UV system timer.
+
+source "drivers/char/tpm/Kconfig"
+
+config TELCLOCK
+	tristate "Telecom clock driver for ATCA SBC"
+	depends on EXPERIMENTAL && X86
+	default n
+	help
+	  The telecom clock device is specific to the MPCBL0010 and MPCBL0050
+	  ATCA computers and allows direct userspace access to the
+	  configuration of the telecom clock configuration settings.  This
+	  device is used for hardware synchronization across the ATCA backplane
+	  fabric.  Upon loading, the driver exports a sysfs directory,
+	  /sys/devices/platform/telco_clock, with a number of files for
+	  controlling the behavior of this hardware.
+
+config DEVPORT
+	bool
+	depends on !M68K
+	depends on ISA || PCI
+	default y
+
+source "drivers/s390/char/Kconfig"
+
+config RAMOOPS
+	tristate "Log panic/oops to a RAM buffer"
+	depends on HAS_IOMEM
+	default n
+	help
+	  This enables panic and oops messages to be logged to a circular
+	  buffer in RAM where it can be read back at some later point.
+
+endmenu
+
diff -Nur linux-2.6.35.7.orig/drivers/char/Makefile linux-2.6.35.7/drivers/char/Makefile
--- linux-2.6.35.7.orig/drivers/char/Makefile	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/char/Makefile	2010-10-14 20:27:59.875601109 +0200
@@ -96,6 +96,7 @@
 obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
 obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
 obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
+obj-$(CONFIG_GPIO_DEVICE)	+= gpio_dev.o
 obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
 obj-$(CONFIG_TELCLOCK)		+= tlclk.o
 
diff -Nur linux-2.6.35.7.orig/drivers/char/Makefile.orig linux-2.6.35.7/drivers/char/Makefile.orig
--- linux-2.6.35.7.orig/drivers/char/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/char/Makefile.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,139 @@
+#
+# Makefile for the kernel character device drivers.
+#
+
+#
+# This file contains the font map for the default (hardware) font
+#
+FONTMAPFILE = cp437.uni
+
+obj-y	 += mem.o random.o tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o tty_buffer.o tty_port.o
+
+obj-$(CONFIG_LEGACY_PTYS)	+= pty.o
+obj-$(CONFIG_UNIX98_PTYS)	+= pty.o
+obj-y				+= misc.o
+obj-$(CONFIG_VT)		+= vt_ioctl.o vc_screen.o selection.o keyboard.o
+obj-$(CONFIG_BFIN_JTAG_COMM)	+= bfin_jtag_comm.o
+obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
+obj-$(CONFIG_HW_CONSOLE)	+= vt.o defkeymap.o
+obj-$(CONFIG_AUDIT)		+= tty_audit.o
+obj-$(CONFIG_MAGIC_SYSRQ)	+= sysrq.o
+obj-$(CONFIG_MVME147_SCC)	+= generic_serial.o vme_scc.o
+obj-$(CONFIG_MVME162_SCC)	+= generic_serial.o vme_scc.o
+obj-$(CONFIG_BVME6000_SCC)	+= generic_serial.o vme_scc.o
+obj-$(CONFIG_ROCKETPORT)	+= rocket.o
+obj-$(CONFIG_SERIAL167)		+= serial167.o
+obj-$(CONFIG_CYCLADES)		+= cyclades.o
+obj-$(CONFIG_STALLION)		+= stallion.o
+obj-$(CONFIG_ISTALLION)		+= istallion.o
+obj-$(CONFIG_NOZOMI)		+= nozomi.o
+obj-$(CONFIG_DIGIEPCA)		+= epca.o
+obj-$(CONFIG_SPECIALIX)		+= specialix.o
+obj-$(CONFIG_MOXA_INTELLIO)	+= moxa.o
+obj-$(CONFIG_A2232)		+= ser_a2232.o generic_serial.o
+obj-$(CONFIG_ATARI_DSP56K)	+= dsp56k.o
+obj-$(CONFIG_MOXA_SMARTIO)	+= mxser.o
+obj-$(CONFIG_COMPUTONE)		+= ip2/
+obj-$(CONFIG_RISCOM8)		+= riscom8.o
+obj-$(CONFIG_ISI)		+= isicom.o
+obj-$(CONFIG_SYNCLINK)		+= synclink.o
+obj-$(CONFIG_SYNCLINKMP)	+= synclinkmp.o
+obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
+obj-$(CONFIG_N_HDLC)		+= n_hdlc.o
+obj-$(CONFIG_N_GSM)		+= n_gsm.o
+obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
+obj-$(CONFIG_SX)		+= sx.o generic_serial.o
+obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
+obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi.o
+obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
+obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
+obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
+obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
+obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
+obj-$(CONFIG_HVC_XEN)		+= hvc_xen.o
+obj-$(CONFIG_HVC_IUCV)		+= hvc_iucv.o
+obj-$(CONFIG_HVC_UDBG)		+= hvc_udbg.o
+obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o
+obj-$(CONFIG_RAW_DRIVER)	+= raw.o
+obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
+obj-$(CONFIG_MSPEC)		+= mspec.o
+obj-$(CONFIG_MMTIMER)		+= mmtimer.o
+obj-$(CONFIG_UV_MMTIMER)	+= uv_mmtimer.o
+obj-$(CONFIG_VIOTAPE)		+= viotape.o
+obj-$(CONFIG_HVCS)		+= hvcs.o
+obj-$(CONFIG_IBM_BSR)		+= bsr.o
+obj-$(CONFIG_SGI_MBCS)		+= mbcs.o
+obj-$(CONFIG_BRIQ_PANEL)	+= briq_panel.o
+obj-$(CONFIG_BFIN_OTP)		+= bfin-otp.o
+
+obj-$(CONFIG_PRINTER)		+= lp.o
+
+obj-$(CONFIG_APM_EMULATION)	+= apm-emulation.o
+
+obj-$(CONFIG_DTLK)		+= dtlk.o
+obj-$(CONFIG_R3964)		+= n_r3964.o
+obj-$(CONFIG_APPLICOM)		+= applicom.o
+obj-$(CONFIG_SONYPI)		+= sonypi.o
+obj-$(CONFIG_RTC)		+= rtc.o
+obj-$(CONFIG_HPET)		+= hpet.o
+obj-$(CONFIG_GEN_RTC)		+= genrtc.o
+obj-$(CONFIG_EFI_RTC)		+= efirtc.o
+obj-$(CONFIG_DS1302)		+= ds1302.o
+obj-$(CONFIG_XILINX_HWICAP)	+= xilinx_hwicap/
+ifeq ($(CONFIG_GENERIC_NVRAM),y)
+  obj-$(CONFIG_NVRAM)	+= generic_nvram.o
+else
+  obj-$(CONFIG_NVRAM)	+= nvram.o
+endif
+obj-$(CONFIG_TOSHIBA)		+= toshiba.o
+obj-$(CONFIG_I8K)		+= i8k.o
+obj-$(CONFIG_DS1620)		+= ds1620.o
+obj-$(CONFIG_HW_RANDOM)		+= hw_random/
+obj-$(CONFIG_PPDEV)		+= ppdev.o
+obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
+obj-$(CONFIG_NWFLASH)		+= nwflash.o
+obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio.o
+obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
+obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
+obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
+obj-$(CONFIG_TELCLOCK)		+= tlclk.o
+
+obj-$(CONFIG_MWAVE)		+= mwave/
+obj-$(CONFIG_AGP)		+= agp/
+obj-$(CONFIG_PCMCIA)		+= pcmcia/
+obj-$(CONFIG_IPMI_HANDLER)	+= ipmi/
+
+obj-$(CONFIG_HANGCHECK_TIMER)	+= hangcheck-timer.o
+obj-$(CONFIG_TCG_TPM)		+= tpm/
+
+obj-$(CONFIG_PS3_FLASH)		+= ps3flash.o
+obj-$(CONFIG_RAMOOPS)		+= ramoops.o
+
+obj-$(CONFIG_JS_RTC)		+= js-rtc.o
+js-rtc-y = rtc.o
+
+# Files generated that shall be removed upon make clean
+clean-files := consolemap_deftbl.c defkeymap.c
+
+quiet_cmd_conmk = CONMK   $@
+      cmd_conmk = scripts/conmakehash $< > $@
+
+$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE)
+	$(call cmd,conmk)
+
+$(obj)/defkeymap.o:  $(obj)/defkeymap.c
+
+# Uncomment if you're changing the keymap and have an appropriate
+# loadkeys version for the map. By default, we'll use the shipped
+# versions.
+# GENERATE_KEYMAP := 1
+
+ifdef GENERATE_KEYMAP
+
+$(obj)/defkeymap.c: $(obj)/%.c: $(src)/%.map
+	loadkeys --mktable $< > $@.tmp
+	sed -e 's/^static *//' $@.tmp > $@
+	rm $@.tmp
+
+endif
diff -Nur linux-2.6.35.7.orig/drivers/gpio/nxp_74hc153.c linux-2.6.35.7/drivers/gpio/nxp_74hc153.c
--- linux-2.6.35.7.orig/drivers/gpio/nxp_74hc153.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/gpio/nxp_74hc153.c	2010-10-14 20:27:59.918101359 +0200
@@ -0,0 +1,246 @@
+/*
+ *  NXP 74HC153 - Dual 4-input multiplexer GPIO driver
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/nxp_74hc153.h>
+
+#define NXP_74HC153_NUM_GPIOS	8
+#define NXP_74HC153_S0_MASK	0x1
+#define NXP_74HC153_S1_MASK	0x2
+#define NXP_74HC153_BANK_MASK	0x4
+
+struct nxp_74hc153_chip {
+	struct device		*parent;
+	struct gpio_chip	gpio_chip;
+	struct mutex		lock;
+};
+
+static struct nxp_74hc153_chip *gpio_to_nxp(struct gpio_chip *gc)
+{
+	return container_of(gc, struct nxp_74hc153_chip, gpio_chip);
+}
+
+static int nxp_74hc153_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	return 0;
+}
+
+static int nxp_74hc153_direction_output(struct gpio_chip *gc,
+					unsigned offset, int val)
+{
+	return -EINVAL;
+}
+
+static int nxp_74hc153_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	struct nxp_74hc153_chip *nxp;
+	struct nxp_74hc153_platform_data *pdata;
+	unsigned s0;
+	unsigned s1;
+	unsigned pin;
+	int ret;
+
+	nxp = gpio_to_nxp(gc);
+	pdata = nxp->parent->platform_data;
+
+	s0 = !!(offset & NXP_74HC153_S0_MASK);
+	s1 = !!(offset & NXP_74HC153_S1_MASK);
+	pin = (offset & NXP_74HC153_BANK_MASK) ? pdata->gpio_pin_2y
+					       : pdata->gpio_pin_1y;
+
+	mutex_lock(&nxp->lock);
+	gpio_set_value(pdata->gpio_pin_s0, s0);
+	gpio_set_value(pdata->gpio_pin_s1, s1);
+	ret = gpio_get_value(pin);
+	mutex_unlock(&nxp->lock);
+
+	return ret;
+}
+
+static void nxp_74hc153_set_value(struct gpio_chip *gc,
+				  unsigned offset, int val)
+{
+	/* not supported */
+}
+
+static int __devinit nxp_74hc153_probe(struct platform_device *pdev)
+{
+	struct nxp_74hc153_platform_data *pdata;
+	struct nxp_74hc153_chip *nxp;
+	struct gpio_chip *gc;
+	int err;
+
+	pdata = pdev->dev.platform_data;
+	if (pdata == NULL) {
+		dev_dbg(&pdev->dev, "no platform data specified\n");
+		return -EINVAL;
+	}
+
+	nxp = kzalloc(sizeof(struct nxp_74hc153_chip), GFP_KERNEL);
+	if (nxp == NULL) {
+		dev_err(&pdev->dev, "no memory for private data\n");
+		return -ENOMEM;
+	}
+
+	err = gpio_request(pdata->gpio_pin_s0, dev_name(&pdev->dev));
+	if (err) {
+		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
+			pdata->gpio_pin_s0, err);
+		goto err_free_nxp;
+	}
+
+	err = gpio_request(pdata->gpio_pin_s1, dev_name(&pdev->dev));
+	if (err) {
+		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
+			pdata->gpio_pin_s1, err);
+		goto err_free_s0;
+	}
+
+	err = gpio_request(pdata->gpio_pin_1y, dev_name(&pdev->dev));
+	if (err) {
+		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
+			pdata->gpio_pin_1y, err);
+		goto err_free_s1;
+	}
+
+	err = gpio_request(pdata->gpio_pin_2y, dev_name(&pdev->dev));
+	if (err) {
+		dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
+			pdata->gpio_pin_2y, err);
+		goto err_free_1y;
+	}
+
+	err = gpio_direction_output(pdata->gpio_pin_s0, 0);
+	if (err) {
+		dev_err(&pdev->dev,
+			"unable to set direction of gpio %u, err=%d\n",
+			pdata->gpio_pin_s0, err);
+		goto err_free_2y;
+	}
+
+	err = gpio_direction_output(pdata->gpio_pin_s1, 0);
+	if (err) {
+		dev_err(&pdev->dev,
+			"unable to set direction of gpio %u, err=%d\n",
+			pdata->gpio_pin_s1, err);
+		goto err_free_2y;
+	}
+
+	err = gpio_direction_input(pdata->gpio_pin_1y);
+	if (err) {
+		dev_err(&pdev->dev,
+			"unable to set direction of gpio %u, err=%d\n",
+			pdata->gpio_pin_1y, err);
+		goto err_free_2y;
+	}
+
+	err = gpio_direction_input(pdata->gpio_pin_2y);
+	if (err) {
+		dev_err(&pdev->dev,
+			"unable to set direction of gpio %u, err=%d\n",
+			pdata->gpio_pin_2y, err);
+		goto err_free_2y;
+	}
+
+	nxp->parent = &pdev->dev;
+	mutex_init(&nxp->lock);
+
+	gc = &nxp->gpio_chip;
+
+	gc->direction_input  = nxp_74hc153_direction_input;
+	gc->direction_output = nxp_74hc153_direction_output;
+	gc->get = nxp_74hc153_get_value;
+	gc->set = nxp_74hc153_set_value;
+	gc->can_sleep = 1;
+
+	gc->base = pdata->gpio_base;
+	gc->ngpio = NXP_74HC153_NUM_GPIOS;
+	gc->label = dev_name(nxp->parent);
+	gc->dev = nxp->parent;
+	gc->owner = THIS_MODULE;
+
+	err = gpiochip_add(&nxp->gpio_chip);
+	if (err) {
+		dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err);
+		goto err_free_2y;
+	}
+
+	platform_set_drvdata(pdev, nxp);
+	return 0;
+
+ err_free_2y:
+	gpio_free(pdata->gpio_pin_2y);
+ err_free_1y:
+	gpio_free(pdata->gpio_pin_1y);
+ err_free_s1:
+	gpio_free(pdata->gpio_pin_s1);
+ err_free_s0:
+	gpio_free(pdata->gpio_pin_s0);
+ err_free_nxp:
+	kfree(nxp);
+	return err;
+}
+
+static int nxp_74hc153_remove(struct platform_device *pdev)
+{
+	struct nxp_74hc153_chip *nxp = platform_get_drvdata(pdev);
+	struct nxp_74hc153_platform_data *pdata = pdev->dev.platform_data;
+
+	if (nxp) {
+		int err;
+
+		err = gpiochip_remove(&nxp->gpio_chip);
+		if (err) {
+			dev_err(&pdev->dev,
+				"unable to remove gpio chip, err=%d\n",
+				err);
+			return err;
+		}
+
+		gpio_free(pdata->gpio_pin_2y);
+		gpio_free(pdata->gpio_pin_1y);
+		gpio_free(pdata->gpio_pin_s1);
+		gpio_free(pdata->gpio_pin_s0);
+
+		kfree(nxp);
+		platform_set_drvdata(pdev, NULL);
+	}
+
+	return 0;
+}
+
+static struct platform_driver nxp_74hc153_driver = {
+	.probe		= nxp_74hc153_probe,
+	.remove		= __devexit_p(nxp_74hc153_remove),
+	.driver = {
+		.name	= NXP_74HC153_DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init nxp_74hc153_init(void)
+{
+	return platform_driver_register(&nxp_74hc153_driver);
+}
+subsys_initcall(nxp_74hc153_init);
+
+static void __exit nxp_74hc153_exit(void)
+{
+	platform_driver_unregister(&nxp_74hc153_driver);
+}
+module_exit(nxp_74hc153_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC153");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" NXP_74HC153_DRIVER_NAME);
diff -Nur linux-2.6.35.7.orig/drivers/input/misc/gpio_buttons.c linux-2.6.35.7/drivers/input/misc/gpio_buttons.c
--- linux-2.6.35.7.orig/drivers/input/misc/gpio_buttons.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/input/misc/gpio_buttons.c	2010-10-14 20:27:59.954442279 +0200
@@ -0,0 +1,216 @@
+/*
+ *  Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ *  This file was based on: /drivers/input/misc/cobalt_btns.c
+ *	Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  also was based on: /drivers/input/keyboard/gpio_keys.c
+ *	Copyright 2005 Phil Blundell
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio_buttons.h>
+
+#include <asm/gpio.h>
+
+#define DRV_NAME	"gpio-buttons"
+#define DRV_VERSION	"0.1.2"
+#define PFX		DRV_NAME ": "
+
+struct gpio_button_data {
+	int last_state;
+	int count;
+};
+
+struct gpio_buttons_dev {
+	struct input_polled_dev *poll_dev;
+	struct gpio_buttons_platform_data *pdata;
+	struct gpio_button_data *data;
+};
+
+static void gpio_buttons_poll(struct input_polled_dev *dev)
+{
+	struct gpio_buttons_dev *bdev = dev->private;
+	struct gpio_buttons_platform_data *pdata = bdev->pdata;
+	struct input_dev *input = dev->input;
+	int i;
+
+	for (i = 0; i < bdev->pdata->nbuttons; i++) {
+		struct gpio_button *button = &pdata->buttons[i];
+		unsigned int type = button->type ?: EV_KEY;
+		int state;
+
+		if (bdev->data[i].count < button->threshold) {
+			bdev->data[i].count++;
+			continue;
+		}
+
+		state = gpio_get_value(button->gpio) ? 1 : 0;
+		if (state != bdev->data[i].last_state) {
+			input_event(input, type, button->code,
+				    !!(state ^ button->active_low));
+			input_sync(input);
+			bdev->data[i].count = 0;
+			bdev->data[i].last_state = state;
+		}
+	}
+}
+
+static int __devinit gpio_buttons_probe(struct platform_device *pdev)
+{
+	struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_buttons_dev *bdev;
+	struct input_polled_dev *poll_dev;
+	struct input_dev *input;
+	int error, i;
+
+	if (!pdata)
+		return -ENXIO;
+
+	bdev = kzalloc(sizeof(struct gpio_buttons_dev) +
+		       sizeof(struct gpio_button_data) * pdata->nbuttons,
+		       GFP_KERNEL);
+	if (!bdev) {
+		printk(KERN_ERR DRV_NAME "no memory for device\n");
+		return -ENOMEM;
+	}
+
+	bdev->data = (struct gpio_button_data *) &bdev[1];
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		printk(KERN_ERR DRV_NAME "no memory for polled device\n");
+		error = -ENOMEM;
+		goto err_free_bdev;
+	}
+
+	poll_dev->private = bdev;
+	poll_dev->poll = gpio_buttons_poll;
+	poll_dev->poll_interval = pdata->poll_interval;
+
+	input = poll_dev->input;
+
+	input->evbit[0] = BIT(EV_KEY);
+	input->name = pdev->name;
+	input->phys = "gpio-buttons/input0";
+	input->dev.parent = &pdev->dev;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		struct gpio_button *button = &pdata->buttons[i];
+		unsigned int gpio = button->gpio;
+		unsigned int type = button->type ?: EV_KEY;
+
+		error = gpio_request(gpio, button->desc ?
+				button->desc : DRV_NAME);
+		if (error) {
+			printk(KERN_ERR PFX "unable to claim gpio %u, "
+				"error %d\n", gpio, error);
+			goto err_free_gpio;
+		}
+
+		error = gpio_direction_input(gpio);
+		if (error) {
+			printk(KERN_ERR PFX "unable to set direction on "
+				"gpio %u, error %d\n", gpio, error);
+			goto err_free_gpio;
+		}
+
+		input_set_capability(input, type, button->code);
+		bdev->data[i].last_state = gpio_get_value(button->gpio) ? 1 : 0;
+	}
+
+	bdev->poll_dev = poll_dev;
+	bdev->pdata = pdata;
+	platform_set_drvdata(pdev, bdev);
+
+	error = input_register_polled_device(poll_dev);
+	if (error) {
+		printk(KERN_ERR PFX "unable to register polled device, "
+			"error %d\n", error);
+		goto err_free_gpio;
+	}
+
+	return 0;
+
+err_free_gpio:
+	for (i = i - 1; i >= 0; i--)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(poll_dev);
+
+err_free_bdev:
+	kfree(bdev);
+
+	platform_set_drvdata(pdev, NULL);
+	return error;
+}
+
+static int __devexit gpio_buttons_remove(struct platform_device *pdev)
+{
+	struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev);
+	struct gpio_buttons_platform_data *pdata = bdev->pdata;
+	int i;
+
+	input_unregister_polled_device(bdev->poll_dev);
+
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(bdev->poll_dev);
+
+	kfree(bdev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver gpio_buttons_driver = {
+	.probe	= gpio_buttons_probe,
+	.remove	= __devexit_p(gpio_buttons_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init gpio_buttons_init(void)
+{
+	printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n");
+	return platform_driver_register(&gpio_buttons_driver);
+}
+
+static void __exit gpio_buttons_exit(void)
+{
+	platform_driver_unregister(&gpio_buttons_driver);
+}
+
+module_init(gpio_buttons_init);
+module_exit(gpio_buttons_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs");
+
diff -Nur linux-2.6.35.7.orig/drivers/input/misc/Kconfig linux-2.6.35.7/drivers/input/misc/Kconfig
--- linux-2.6.35.7.orig/drivers/input/misc/Kconfig	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/input/misc/Kconfig	2010-10-14 20:27:59.998101300 +0200
@@ -390,4 +390,20 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcap_keys.
 
+config INPUT_GPIO_BUTTONS
+	tristate "Polled GPIO buttons interface"
+	depends on GENERIC_GPIO
+	select INPUT_POLLDEV
+	help
+	  This driver implements support for buttons connected
+	  to GPIO pins of various CPUs (and some other chips).
+
+	  Say Y here if your device has buttons connected
+	  directly to such GPIO pins.  Your board-specific
+	  setup logic must also provide a platform device,
+	  with configuration data saying which GPIOs are used.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gpio-buttons.
+
 endif
diff -Nur linux-2.6.35.7.orig/drivers/input/misc/Kconfig.orig linux-2.6.35.7/drivers/input/misc/Kconfig.orig
--- linux-2.6.35.7.orig/drivers/input/misc/Kconfig.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/input/misc/Kconfig.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,393 @@
+#
+# Input misc drivers configuration
+#
+menuconfig INPUT_MISC
+	bool "Miscellaneous devices"
+	help
+	  Say Y here, and a list of miscellaneous input drivers will be displayed.
+	  Everything that didn't fit into the other categories is here. This option
+	  doesn't affect the kernel.
+
+	  If unsure, say Y.
+
+if INPUT_MISC
+
+config INPUT_88PM860X_ONKEY
+	tristate "88PM860x ONKEY support"
+	depends on MFD_88PM860X
+	help
+	  Support the ONKEY of Marvell 88PM860x PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 88pm860x_onkey.
+
+config INPUT_AD714X
+	tristate "Analog Devices AD714x Capacitance Touch Sensor"
+	help
+	  Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
+
+	  You should select a bus connection too.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x.
+
+config INPUT_AD714X_I2C
+	tristate "support I2C bus connection"
+	depends on INPUT_AD714X && I2C
+	default y
+	help
+	  Say Y here if you have AD7142/AD7147 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x-i2c.
+
+config INPUT_AD714X_SPI
+	tristate "support SPI bus connection"
+	depends on INPUT_AD714X && SPI
+	default y
+	help
+	  Say Y here if you have AD7142/AD7147 hooked to a SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad714x-spi.
+
+config INPUT_PCSPKR
+	tristate "PC Speaker support"
+	depends on PCSPKR_PLATFORM
+	help
+	  Say Y here if you want the standard PC Speaker to be used for
+	  bells and whistles.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcspkr.
+
+config INPUT_SPARCSPKR
+	tristate "SPARC Speaker support"
+	depends on PCI && SPARC64
+	help
+	  Say Y here if you want the standard Speaker on Sparc PCI systems
+	  to be used for bells and whistles.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sparcspkr.
+
+config INPUT_M68K_BEEP
+	tristate "M68k Beeper support"
+	depends on M68K
+
+config INPUT_MAX8925_ONKEY
+	tristate "MAX8925 ONKEY support"
+	depends on MFD_MAX8925
+	help
+	  Support the ONKEY of MAX8925 PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called max8925_onkey.
+
+config INPUT_APANEL
+	tristate "Fujitsu Lifebook Application Panel buttons"
+	depends on X86 && I2C && LEDS_CLASS
+	select INPUT_POLLDEV
+	select CHECK_SIGNATURE
+	help
+	 Say Y here for support of the Application Panel buttons, used on
+	 Fujitsu Lifebook. These are attached to the mainboard through
+	 an SMBus interface managed by the I2C Intel ICH (i801) driver,
+	 which you should also build for this kernel.
+
+	 To compile this driver as a module, choose M here: the module will
+	 be called apanel.
+
+config INPUT_IXP4XX_BEEPER
+	tristate "IXP4XX Beeper support"
+	depends on ARCH_IXP4XX
+	help
+	  If you say yes here, you can connect a beeper to the
+	  ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ixp4xx-beeper.
+
+config INPUT_COBALT_BTNS
+	tristate "Cobalt button interface"
+	depends on MIPS_COBALT
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want to support MIPS Cobalt button interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cobalt_btns.
+
+config INPUT_WISTRON_BTNS
+	tristate "x86 Wistron laptop button interface"
+	depends on X86 && !X86_64
+	select INPUT_POLLDEV
+	select INPUT_SPARSEKMAP
+	select NEW_LEDS
+	select LEDS_CLASS
+	select CHECK_SIGNATURE
+	help
+	  Say Y here for support of Wistron laptop button interfaces, used on
+	  laptops of various brands, including Acer and Fujitsu-Siemens. If
+	  available, mail and wifi LEDs will be controllable via /sys/class/leds.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called wistron_btns.
+
+config INPUT_ATLAS_BTNS
+	tristate "x86 Atlas button interface"
+	depends on X86 && ACPI
+	help
+	  Say Y here for support of Atlas wallmount touchscreen buttons.
+	  The events will show up as scancodes F1 through F9 via evdev.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called atlas_btns.
+
+config INPUT_ATI_REMOTE
+	tristate "ATI / X10 USB RF remote control"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use an ATI or X10 "Lola" USB remote control.
+	  These are RF remotes with USB receivers.
+	  The ATI remote comes with many of ATI's All-In-Wonder video cards.
+	  The X10 "Lola" remote is available at:
+	     <http://www.x10.com/products/lola_sg1.htm>
+	  This driver provides mouse pointer, left and right mouse buttons,
+	  and maps all the other remote buttons to keypress events.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ati_remote.
+
+config INPUT_ATI_REMOTE2
+	tristate "ATI / Philips USB RF remote control"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use an ATI or Philips USB RF remote control.
+	  These are RF remotes with USB receivers.
+	  ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
+	  and is also available as a separate product.
+	  This driver provides mouse pointer, left and right mouse buttons,
+	  and maps all the other remote buttons to keypress events.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ati_remote2.
+
+config INPUT_KEYSPAN_REMOTE
+	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use a Keyspan DMR USB remote control.
+	  Currently only the UIA-11 type of receiver has been tested.  The tag
+	  on the receiver that connects to the USB port should have a P/N that
+	  will tell you what type of DMR you have.  The UIA-10 type is not
+	  supported at this time.  This driver maps all buttons to keypress
+	  events.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called keyspan_remote.
+
+config INPUT_POWERMATE
+	tristate "Griffin PowerMate and Contour Jog support"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
+	  These are aluminum dials which can measure clockwise and anticlockwise
+	  rotation.  The dial also acts as a pushbutton.  The base contains an LED
+	  which can be instructed to pulse or to switch to a particular intensity.
+
+	  You can download userspace tools from
+	  <http://sowerbutts.com/powermate/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called powermate.
+
+config INPUT_YEALINK
+	tristate "Yealink usb-p1k voip phone"
+	depends on EXPERIMENTAL
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to enable keyboard and LCD functions of the
+	  Yealink usb-p1k usb phones. The audio part is enabled by the generic
+	  usb sound driver, so you might want to enable that as well.
+
+	  For information about how to use these additional functions, see
+	  <file:Documentation/input/yealink.txt>.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called yealink.
+
+config INPUT_CM109
+	tristate "C-Media CM109 USB I/O Controller"
+	depends on EXPERIMENTAL
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to enable keyboard and buzzer functions of the
+	  C-Media CM109 usb phones. The audio part is enabled by the generic
+	  usb sound driver, so you might want to enable that as well.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called cm109.
+
+config INPUT_TWL4030_PWRBUTTON
+	tristate "TWL4030 Power button Driver"
+	depends on TWL4030_CORE
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  TWL4030 family of chips.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called twl4030_pwrbutton.
+
+config INPUT_TWL4030_VIBRA
+	tristate "Support for TWL4030 Vibrator"
+	depends on TWL4030_CORE
+	select TWL4030_CODEC
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables support for TWL4030 Vibrator Driver.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called twl4030_vibra.
+
+config INPUT_UINPUT
+	tristate "User level driver support"
+	help
+	  Say Y here if you want to support user level drivers for input
+	  subsystem accessible under char device 10:223 - /dev/input/uinput.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called uinput.
+
+config INPUT_SGI_BTNS
+	tristate "SGI Indy/O2 volume button interface"
+	depends on SGI_IP22 || SGI_IP32
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want to support SGI Indy/O2 volume button interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sgi_btns.
+
+config INPUT_WINBOND_CIR
+	tristate "Winbond IR remote control"
+	depends on X86 && PNP
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_TRIGGERS
+	select BITREVERSE
+	help
+	  Say Y here if you want to use the IR remote functionality found
+	  in some Winbond SuperI/O chips. Currently only the WPCD376I
+	  chip is supported (included in some Intel Media series motherboards).
+
+	  IR Receive and wake-on-IR from suspend and power-off is currently
+	  supported.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called winbond_cir.
+
+config HP_SDC_RTC
+	tristate "HP SDC Real Time Clock"
+	depends on (GSC || HP300) && SERIO
+	select HP_SDC
+	help
+	  Say Y here if you want to support the built-in real time clock
+	  of the HP SDC controller.
+
+config INPUT_PCF50633_PMU
+	tristate "PCF50633 PMU events"
+	depends on MFD_PCF50633
+	help
+	 Say Y to include support for delivering  PMU events via  input
+	 layer on NXP PCF50633.
+
+config INPUT_PCF8574
+	tristate "PCF8574 Keypad input device"
+	depends on I2C && EXPERIMENTAL
+	help
+	  Say Y here if you want to support a keypad connetced via I2C
+	  with a PCF8574.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcf8574_keypad.
+
+config INPUT_GPIO_ROTARY_ENCODER
+	tristate "Rotary encoders connected to GPIO pins"
+	depends on GPIOLIB && GENERIC_GPIO
+	help
+	  Say Y here to add support for rotary encoders connected to GPIO lines.
+	  Check file:Documentation/input/rotary-encoder.txt for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rotary_encoder.
+
+config INPUT_RB532_BUTTON
+	tristate "Mikrotik Routerboard 532 button interface"
+	depends on MIKROTIK_RB532
+	depends on GPIOLIB && GENERIC_GPIO
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want support for the S1 button built into
+	  Mikrotik's Routerboard 532.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rb532_button.
+
+config INPUT_DM355EVM
+	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
+	depends on MFD_DM355EVM_MSP
+	select INPUT_SPARSEKMAP
+	help
+	  Supports the pushbuttons and IR remote used with
+	  the DM355 EVM board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dm355evm_keys.
+
+config INPUT_BFIN_ROTARY
+	tristate "Blackfin Rotary support"
+	depends on BF54x || BF52x
+	help
+	  Say Y here if you want to use the Blackfin Rotary.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin-rotary.
+
+config INPUT_WM831X_ON
+	tristate "WM831X ON pin"
+	depends on MFD_WM831X
+	help
+	  Support the ON pin of WM831X PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called wm831x_on.
+
+config INPUT_PCAP
+	tristate "Motorola EZX PCAP misc input events"
+	depends on EZX_PCAP
+	help
+	  Say Y here if you want to use Power key and Headphone button
+	  on Motorola EZX phones.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcap_keys.
+
+endif
diff -Nur linux-2.6.35.7.orig/drivers/input/misc/Makefile linux-2.6.35.7/drivers/input/misc/Makefile
--- linux-2.6.35.7.orig/drivers/input/misc/Makefile	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/input/misc/Makefile	2010-10-14 20:28:00.038101118 +0200
@@ -37,4 +37,5 @@
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
+obj-$(CONFIG_INPUT_GPIO_BUTTONS)	+= gpio_buttons.o
 
diff -Nur linux-2.6.35.7.orig/drivers/input/misc/Makefile.orig linux-2.6.35.7/drivers/input/misc/Makefile.orig
--- linux-2.6.35.7.orig/drivers/input/misc/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/input/misc/Makefile.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,40 @@
+#
+# Makefile for the input misc drivers.
+#
+
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_INPUT_88PM860X_ONKEY)	+= 88pm860x_onkey.o
+obj-$(CONFIG_INPUT_AD714X)		+= ad714x.o
+obj-$(CONFIG_INPUT_AD714X_I2C)		+= ad714x-i2c.o
+obj-$(CONFIG_INPUT_AD714X_SPI)		+= ad714x-spi.o
+obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
+obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
+obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
+obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
+obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
+obj-$(CONFIG_INPUT_CM109)		+= cm109.o
+obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
+obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
+obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
+obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
+obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
+obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
+obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
+obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
+obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
+obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
+obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
+obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
+obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
+obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
+obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
+obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
+obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
+obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
+obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
+obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winbond-cir.o
+obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
+obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
+
diff -Nur linux-2.6.35.7.orig/drivers/leds/leds-rb750.c linux-2.6.35.7/drivers/leds/leds-rb750.c
--- linux-2.6.35.7.orig/drivers/leds/leds-rb750.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/leds/leds-rb750.c	2010-10-14 20:28:00.074930320 +0200
@@ -0,0 +1,140 @@
+/*
+ * LED driver for the RouterBOARD 750
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+
+#include <asm/mach-ar71xx/mach-rb750.h>
+
+#define DRV_NAME	"leds-rb750"
+
+struct rb750_led_dev {
+	struct led_classdev	cdev;
+	u32			mask;
+	int			active_low;
+};
+
+struct rb750_led_drvdata {
+	struct rb750_led_dev	*led_devs;
+	int			num_leds;
+};
+
+static inline struct rb750_led_dev *to_rbled(struct led_classdev *led_cdev)
+{
+	return (struct rb750_led_dev *)container_of(led_cdev,
+		struct rb750_led_dev, cdev);
+}
+
+static void rb750_led_brightness_set(struct led_classdev *led_cdev,
+				     enum led_brightness value)
+{
+	struct rb750_led_dev *rbled = to_rbled(led_cdev);
+	int level;
+
+	level = (value == LED_OFF) ? 0 : 1;
+	level ^= rbled->active_low;
+
+	if (level)
+		rb750_latch_change(0, rbled->mask);
+	else
+		rb750_latch_change(rbled->mask, 0);
+}
+
+static int __devinit rb750_led_probe(struct platform_device *pdev)
+{
+	struct rb750_led_platform_data *pdata;
+	struct rb750_led_drvdata *drvdata;
+	int ret = 0;
+	int i;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata)
+		return -EINVAL;
+
+	drvdata = kzalloc(sizeof(struct rb750_led_drvdata) +
+			  sizeof(struct rb750_led_dev) * pdata->num_leds,
+			  GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	drvdata->num_leds = pdata->num_leds;
+	drvdata->led_devs = (struct rb750_led_dev *) &drvdata[1];
+
+	for (i = 0; i < drvdata->num_leds; i++) {
+		struct rb750_led_dev *rbled = &drvdata->led_devs[i];
+		struct rb750_led_data *led_data = &pdata->leds[i];
+
+		rbled->cdev.name = led_data->name;
+		rbled->cdev.default_trigger = led_data->default_trigger;
+		rbled->cdev.brightness_set = rb750_led_brightness_set;
+		rbled->cdev.brightness = LED_OFF;
+
+		rbled->mask = led_data->mask;
+		rbled->active_low = !!led_data->active_low;
+
+		ret = led_classdev_register(&pdev->dev, &rbled->cdev);
+		if (ret)
+			goto err;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+	return 0;
+
+ err:
+	for (i = i - 1; i >= 0; i--)
+		led_classdev_unregister(&drvdata->led_devs[i].cdev);
+
+	kfree(drvdata);
+	return ret;
+}
+
+static int __devexit rb750_led_remove(struct platform_device *pdev)
+{
+	struct rb750_led_drvdata *drvdata;
+	int i;
+
+	drvdata = platform_get_drvdata(pdev);
+	for (i = 0; i < drvdata->num_leds; i++)
+		led_classdev_unregister(&drvdata->led_devs[i].cdev);
+
+	kfree(drvdata);
+	return 0;
+}
+
+static struct platform_driver rb750_led_driver = {
+	.probe		= rb750_led_probe,
+	.remove		= __devexit_p(rb750_led_remove),
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+MODULE_ALIAS("platform:leds-rb750");
+
+static int __init rb750_led_init(void)
+{
+	return platform_driver_register(&rb750_led_driver);
+}
+
+static void __exit rb750_led_exit(void)
+{
+	platform_driver_unregister(&rb750_led_driver);
+}
+
+module_init(rb750_led_init);
+module_exit(rb750_led_exit);
+
+MODULE_DESCRIPTION(DRV_NAME);
+MODULE_DESCRIPTION("LED driver for the RouterBOARD 750");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff -Nur linux-2.6.35.7.orig/drivers/leds/leds-wndr3700-usb.c linux-2.6.35.7/drivers/leds/leds-wndr3700-usb.c
--- linux-2.6.35.7.orig/drivers/leds/leds-wndr3700-usb.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/leds/leds-wndr3700-usb.c	2010-10-14 20:28:00.116443396 +0200
@@ -0,0 +1,75 @@
+/*
+ *  USB LED driver for the NETGEAR WNDR3700
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#define DRIVER_NAME	"wndr3700-led-usb"
+
+static void wndr3700_usb_led_set(struct led_classdev *cdev,
+				 enum led_brightness brightness)
+{
+	if (brightness)
+		ar71xx_device_start(RESET_MODULE_GE1_PHY);
+	else
+		ar71xx_device_stop(RESET_MODULE_GE1_PHY);
+}
+
+static enum led_brightness wndr3700_usb_led_get(struct led_classdev *cdev)
+{
+	return ar71xx_device_stopped(RESET_MODULE_GE1_PHY) ? LED_OFF : LED_FULL;
+}
+
+static struct led_classdev wndr3700_usb_led = {
+	.name = "wndr3700:green:usb",
+	.brightness_set = wndr3700_usb_led_set,
+	.brightness_get = wndr3700_usb_led_get,
+};
+
+static int __devinit wndr3700_usb_led_probe(struct platform_device *pdev)
+{
+	return led_classdev_register(&pdev->dev, &wndr3700_usb_led);
+}
+
+static int __devexit wndr3700_usb_led_remove(struct platform_device *pdev)
+{
+	led_classdev_unregister(&wndr3700_usb_led);
+	return 0;
+}
+
+static struct platform_driver wndr3700_usb_led_driver = {
+	.probe = wndr3700_usb_led_probe,
+	.remove = __devexit_p(wndr3700_usb_led_remove),
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init wndr3700_usb_led_init(void)
+{
+	return platform_driver_register(&wndr3700_usb_led_driver);
+}
+
+static void __exit wndr3700_usb_led_exit(void)
+{
+	platform_driver_unregister(&wndr3700_usb_led_driver);
+}
+
+module_init(wndr3700_usb_led_init);
+module_exit(wndr3700_usb_led_exit);
+
+MODULE_DESCRIPTION("USB LED driver for the NETGEAR WNDR3700");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff -Nur linux-2.6.35.7.orig/drivers/mtd/maps/ar91xx_flash.c linux-2.6.35.7/drivers/mtd/maps/ar91xx_flash.c
--- linux-2.6.35.7.orig/drivers/mtd/maps/ar91xx_flash.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/mtd/maps/ar91xx_flash.c	2010-10-14 20:28:00.154356608 +0200
@@ -0,0 +1,310 @@
+/*
+ * Parallel flash driver for the Atheros AR91xx SoC
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/ar91xx_flash.h>
+
+#define DRV_NAME	"ar91xx-flash"
+
+struct ar91xx_flash_info {
+	struct mtd_info		*mtd;
+	struct map_info		map;
+#ifdef CONFIG_MTD_PARTITIONS
+	int			nr_parts;
+	struct mtd_partition	*parts;
+#endif
+};
+
+static map_word ar91xx_flash_read(struct map_info *map, unsigned long ofs)
+{
+	map_word val;
+
+	if (map_bankwidth_is_1(map))
+		val.x[0] = __raw_readb(map->virt + (ofs ^ 3));
+	else if (map_bankwidth_is_2(map))
+		val.x[0] = __raw_readw(map->virt + (ofs ^ 2));
+	else
+		val = map_word_ff(map);
+
+	return val;
+}
+
+static void ar91xx_flash_write(struct map_info *map, map_word d,
+			       unsigned long ofs)
+{
+	if (map_bankwidth_is_1(map))
+		__raw_writeb(d.x[0], map->virt + (ofs ^ 3));
+	else if (map_bankwidth_is_2(map))
+		__raw_writew(d.x[0], map->virt + (ofs ^ 2));
+
+	mb();
+}
+
+static map_word ar91xx_flash_read_lock(struct map_info *map, unsigned long ofs)
+{
+	map_word ret;
+
+	ar71xx_flash_acquire();
+	ret = ar91xx_flash_read(map, ofs);
+	ar71xx_flash_release();
+
+	return ret;
+}
+
+static void ar91xx_flash_write_lock(struct map_info *map, map_word d,
+			       unsigned long ofs)
+{
+	ar71xx_flash_acquire();
+	ar91xx_flash_write(map, d, ofs);
+	ar71xx_flash_release();
+}
+
+static void ar91xx_flash_copy_from_lock(struct map_info *map, void *to,
+					unsigned long from, ssize_t len)
+{
+	ar71xx_flash_acquire();
+	inline_map_copy_from(map, to, from, len);
+	ar71xx_flash_release();
+}
+
+static void ar91xx_flash_copy_to_lock(struct map_info *map, unsigned long to,
+				      const void *from, ssize_t len)
+{
+	ar71xx_flash_acquire();
+	inline_map_copy_to(map, to, from, len);
+	ar71xx_flash_release();
+}
+
+static int ar91xx_flash_remove(struct platform_device *pdev)
+{
+	struct ar91xx_flash_platform_data *pdata;
+	struct ar91xx_flash_info *info;
+
+	info = platform_get_drvdata(pdev);
+	if (info == NULL)
+		return 0;
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (info->mtd == NULL)
+		return 0;
+
+	pdata = pdev->dev.platform_data;
+#ifdef CONFIG_MTD_PARTITIONS
+	if (info->nr_parts) {
+		del_mtd_partitions(info->mtd);
+		kfree(info->parts);
+	} else if (pdata->nr_parts) {
+		del_mtd_partitions(info->mtd);
+	} else {
+		del_mtd_device(info->mtd);
+	}
+#else
+	del_mtd_device(info->mtd);
+#endif
+	map_destroy(info->mtd);
+
+	return 0;
+}
+
+static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL };
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+static int ar91xx_flash_probe(struct platform_device *pdev)
+{
+	struct ar91xx_flash_platform_data *pdata;
+	struct ar91xx_flash_info *info;
+	struct resource *res;
+	struct resource *region;
+	const char **probe_type;
+	int err = 0;
+
+	pdata = pdev->dev.platform_data;
+	if (pdata == NULL)
+		return -EINVAL;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct ar91xx_flash_info),
+			    GFP_KERNEL);
+	if (info == NULL) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	platform_set_drvdata(pdev, info);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		err = -ENOENT;
+		goto err_out;
+	}
+
+	dev_info(&pdev->dev, "%.8llx at %.8llx\n",
+		 (unsigned long long)(res->end - res->start + 1),
+		 (unsigned long long)res->start);
+
+	region = devm_request_mem_region(&pdev->dev,
+					 res->start, res->end - res->start + 1,
+					 dev_name(&pdev->dev));
+	if (region == NULL) {
+		dev_err(&pdev->dev, "could not reserve memory region\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	info->map.name = dev_name(&pdev->dev);
+	info->map.phys = res->start;
+	info->map.size = res->end - res->start + 1;
+	info->map.bankwidth = pdata->width;
+
+	info->map.virt = devm_ioremap(&pdev->dev, info->map.phys,
+				      info->map.size);
+	if (info->map.virt == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap flash region\n");
+		err = -EIO;
+		goto err_out;
+	}
+
+	simple_map_init(&info->map);
+	if (pdata->is_shared) {
+		info->map.read = ar91xx_flash_read_lock;
+		info->map.write = ar91xx_flash_write_lock;
+		info->map.copy_from = ar91xx_flash_copy_from_lock;
+		info->map.copy_to = ar91xx_flash_copy_to_lock;
+	} else {
+		info->map.read = ar91xx_flash_read;
+		info->map.write = ar91xx_flash_write;
+	}
+
+	probe_type = rom_probe_types;
+	for (; info->mtd == NULL && *probe_type != NULL; probe_type++)
+		info->mtd = do_map_probe(*probe_type, &info->map);
+
+	if (info->mtd == NULL) {
+		dev_err(&pdev->dev, "map_probe failed\n");
+		err = -ENXIO;
+		goto err_out;
+	}
+
+	info->mtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	if (pdata->nr_parts) {
+		dev_info(&pdev->dev, "using static partition mapping\n");
+		add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
+		return 0;
+	}
+
+	err = parse_mtd_partitions(info->mtd, part_probe_types,
+				   &info->parts, 0);
+	if (err > 0) {
+		add_mtd_partitions(info->mtd, info->parts, err);
+		return 0;
+	}
+#endif
+
+	add_mtd_device(info->mtd);
+	return 0;
+
+ err_out:
+	ar91xx_flash_remove(pdev);
+	return err;
+}
+
+#ifdef CONFIG_PM
+static int ar91xx_flash_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct ar91xx_flash_info *info = platform_get_drvdata(dev);
+	int ret = 0;
+
+	if (info->mtd->suspend)
+		ret = info->mtd->suspend(info->mtd);
+
+	if (ret)
+		goto fail;
+
+	return 0;
+
+ fail:
+	if (info->mtd->suspend) {
+		BUG_ON(!info->mtd->resume);
+		info->mtd->resume(info->mtd);
+	}
+
+	return ret;
+}
+
+static int ar91xx_flash_resume(struct platform_device *pdev)
+{
+	struct ar91xx_flash_info *info = platform_get_drvdata(pdev);
+
+	if (info->mtd->resume)
+		info->mtd->resume(info->mtd);
+
+	return 0;
+}
+
+static void ar91xx_flash_shutdown(struct platform_device *pdev)
+{
+	struct ar91xx_flash_info *info = platform_get_drvdata(pdev);
+
+	if (info->mtd->suspend && info->mtd->resume)
+		if (info->mtd->suspend(info->mtd) == 0)
+			info->mtd->resume(info->mtd);
+}
+#else
+#define ar91xx_flash_suspend	NULL
+#define ar91xx_flash_resume	NULL
+#define ar91xx_flash_shutdown	NULL
+#endif
+
+static struct platform_driver ar91xx_flash_driver = {
+	.probe		= ar91xx_flash_probe,
+	.remove		= ar91xx_flash_remove,
+	.suspend	= ar91xx_flash_suspend,
+	.resume		= ar91xx_flash_resume,
+	.shutdown	= ar91xx_flash_shutdown,
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ar91xx_flash_init(void)
+{
+	return platform_driver_register(&ar91xx_flash_driver);
+}
+
+static void __exit ar91xx_flash_exit(void)
+{
+	platform_driver_unregister(&ar91xx_flash_driver);
+}
+
+module_init(ar91xx_flash_init);
+module_exit(ar91xx_flash_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Parallel flash driver for the Atheros AR91xx SoC");
+MODULE_ALIAS("platform:" DRV_NAME);
diff -Nur linux-2.6.35.7.orig/drivers/mtd/maps/Kconfig linux-2.6.35.7/drivers/mtd/maps/Kconfig
--- linux-2.6.35.7.orig/drivers/mtd/maps/Kconfig	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/mtd/maps/Kconfig	2010-10-14 20:28:00.198101134 +0200
@@ -251,6 +251,13 @@
 	help
 	  Support for flash chips on NETtel/SecureEdge/SnapGear boards.
 
+config MTD_AR91XX_FLASH
+	tristate "Atheros AR91xx parallel flash support"
+	depends on ATHEROS_AR71XX
+	select MTD_COMPLEX_MAPPINGS
+	help
+	  Parallel flash driver for the Atheros AR91xx based boards.
+
 config MTD_DILNETPC
 	tristate "CFI Flash device mapped on DIL/Net PC"
 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
diff -Nur linux-2.6.35.7.orig/drivers/mtd/maps/Makefile linux-2.6.35.7/drivers/mtd/maps/Makefile
--- linux-2.6.35.7.orig/drivers/mtd/maps/Makefile	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/mtd/maps/Makefile	2010-10-14 20:28:00.238101165 +0200
@@ -7,6 +7,7 @@
 endif
 
 # Chip mappings
+obj-$(CONFIG_MTD_AR91XX_FLASH)	+= ar91xx_flash.o
 obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
 obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
diff -Nur linux-2.6.35.7.orig/drivers/mtd/nand/Kconfig linux-2.6.35.7/drivers/mtd/nand/Kconfig
--- linux-2.6.35.7.orig/drivers/mtd/nand/Kconfig	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/mtd/nand/Kconfig	2010-10-14 20:28:00.288101273 +0200
@@ -526,4 +526,8 @@
 	  This enables the driver for the NAND Flash on evaluation board based
 	  on w90p910 / NUC9xx.
 
+config MTD_NAND_RB4XX
+	tristate "NAND flash driver for RouterBoard 4xx series"
+	depends on MTD_NAND && AR71XX_MACH_RB4XX
+
 endif # MTD_NAND
diff -Nur linux-2.6.35.7.orig/drivers/mtd/nand/Kconfig.orig linux-2.6.35.7/drivers/mtd/nand/Kconfig.orig
--- linux-2.6.35.7.orig/drivers/mtd/nand/Kconfig.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/mtd/nand/Kconfig.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,529 @@
+config MTD_NAND_ECC
+	tristate
+
+config MTD_NAND_ECC_SMC
+	bool "NAND ECC Smart Media byte order"
+	depends on MTD_NAND_ECC
+	default n
+	help
+	  Software ECC according to the Smart Media Specification.
+	  The original Linux implementation had byte 0 and 1 swapped.
+
+
+menuconfig MTD_NAND
+	tristate "NAND Device Support"
+	depends on MTD
+	select MTD_NAND_IDS
+	select MTD_NAND_ECC
+	help
+	  This enables support for accessing all type of NAND flash
+	  devices. For further information see
+	  <http://www.linux-mtd.infradead.org/doc/nand.html>.
+
+if MTD_NAND
+
+config MTD_NAND_VERIFY_WRITE
+	bool "Verify NAND page writes"
+	help
+	  This adds an extra check when data is written to the flash. The
+	  NAND flash device internally checks only bits transitioning
+	  from 1 to 0. There is a rare possibility that even though the
+	  device thinks the write was successful, a bit could have been
+	  flipped accidentally due to device wear or something else.
+
+config MTD_SM_COMMON
+	tristate
+	default n
+
+config MTD_NAND_MUSEUM_IDS
+	bool "Enable chip ids for obsolete ancient NAND devices"
+	depends on MTD_NAND
+	default n
+	help
+	  Enable this option only when your board has first generation
+	  NAND chips (page size 256 byte, erase size 4-8KiB). The IDs
+	  of these chips were reused by later, larger chips.
+
+config MTD_NAND_AUTCPU12
+	tristate "SmartMediaCard on autronix autcpu12 board"
+	depends on ARCH_AUTCPU12
+	help
+	  This enables the driver for the autronix autcpu12 board to
+	  access the SmartMediaCard.
+
+config MTD_NAND_DENALI
+       depends on PCI
+        tristate "Support Denali NAND controller on Intel Moorestown"
+        help
+          Enable the driver for NAND flash on Intel Moorestown, using the
+          Denali NAND controller core.
+ 
+config MTD_NAND_DENALI_SCRATCH_REG_ADDR
+        hex "Denali NAND size scratch register address"
+        default "0xFF108018"
+        help
+          Some platforms place the NAND chip size in a scratch register
+          because (some versions of) the driver aren't able to automatically
+          determine the size of certain chips. Set the address of the
+          scratch register here to enable this feature. On Intel Moorestown
+          boards, the scratch register is at 0xFF108018.
+
+config MTD_NAND_EDB7312
+	tristate "Support for Cirrus Logic EBD7312 evaluation board"
+	depends on ARCH_EDB7312
+	help
+	  This enables the driver for the Cirrus Logic EBD7312 evaluation
+	  board to access the onboard NAND Flash.
+
+config MTD_NAND_H1900
+	tristate "iPAQ H1900 flash"
+	depends on ARCH_PXA && MTD_PARTITIONS
+	help
+	  This enables the driver for the iPAQ h1900 flash.
+
+config MTD_NAND_GPIO
+	tristate "GPIO NAND Flash driver"
+	depends on GENERIC_GPIO && ARM
+	help
+	  This enables a GPIO based NAND flash driver.
+
+config MTD_NAND_SPIA
+	tristate "NAND Flash device on SPIA board"
+	depends on ARCH_P720T
+	help
+	  If you had to ask, you don't have one. Say 'N'.
+
+config MTD_NAND_AMS_DELTA
+	tristate "NAND Flash device on Amstrad E3"
+	depends on MACH_AMS_DELTA
+	help
+	  Support for NAND flash on Amstrad E3 (Delta).
+
+config MTD_NAND_OMAP2
+	tristate "NAND Flash device on OMAP2 and OMAP3"
+	depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+	help
+          Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+
+config MTD_NAND_OMAP_PREFETCH
+	bool "GPMC prefetch support for NAND Flash device"
+	depends on MTD_NAND && MTD_NAND_OMAP2
+	default y
+	help
+	 The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
+	 to improve the performance.
+
+config MTD_NAND_OMAP_PREFETCH_DMA
+	depends on MTD_NAND_OMAP_PREFETCH
+	bool "DMA mode"
+	default n
+	help
+	 The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
+	 or in DMA interrupt mode.
+	 Say y for DMA mode or MPU mode will be used
+
+config MTD_NAND_IDS
+	tristate
+
+config MTD_NAND_RICOH
+	tristate "Ricoh xD card reader"
+	default n
+	depends on PCI
+	select MTD_SM_COMMON
+	help
+	  Enable support for Ricoh R5C852 xD card reader
+	  You also need to enable ether
+	  NAND SSFDC (SmartMedia) read only translation layer' or new
+	  expermental, readwrite
+	  'SmartMedia/xD new translation layer'
+
+config MTD_NAND_AU1550
+	tristate "Au1550/1200 NAND support"
+	depends on SOC_AU1200 || SOC_AU1550
+	help
+	  This enables the driver for the NAND flash controller on the
+	  AMD/Alchemy 1550 SOC.
+
+config MTD_NAND_BF5XX
+	tristate "Blackfin on-chip NAND Flash Controller driver"
+	depends on (BF54x || BF52x) && MTD_NAND
+	help
+	  This enables the Blackfin on-chip NAND flash controller
+
+	  No board specific support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called bf5xx-nand.
+
+config MTD_NAND_BF5XX_HWECC
+	bool "BF5XX NAND Hardware ECC"
+	default y
+	depends on MTD_NAND_BF5XX
+	help
+	  Enable the use of the BF5XX's internal ECC generator when
+	  using NAND.
+
+config MTD_NAND_BF5XX_BOOTROM_ECC
+	bool "Use Blackfin BootROM ECC Layout"
+	default n
+	depends on MTD_NAND_BF5XX_HWECC
+	help
+	  If you wish to modify NAND pages and allow the Blackfin on-chip
+	  BootROM to boot from them, say Y here.  This is only necessary
+	  if you are booting U-Boot out of NAND and you wish to update
+	  U-Boot from Linux' userspace.  Otherwise, you should say N here.
+
+	  If unsure, say N.
+
+config MTD_NAND_RTC_FROM4
+	tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
+	depends on SH_SOLUTION_ENGINE
+	select REED_SOLOMON
+	select REED_SOLOMON_DEC8
+	select BITREVERSE
+	help
+	  This enables the driver for the Renesas Technology AG-AND
+	  flash interface board (FROM_BOARD4)
+
+config MTD_NAND_PPCHAMELEONEVB
+	tristate "NAND Flash device on PPChameleonEVB board"
+	depends on PPCHAMELEONEVB && BROKEN
+	help
+	  This enables the NAND flash driver on the PPChameleon EVB Board.
+
+config MTD_NAND_S3C2410
+	tristate "NAND Flash support for Samsung S3C SoCs"
+	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	help
+	  This enables the NAND flash controller on the S3C24xx and S3C64xx
+	  SoCs
+
+	  No board specific support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_S3C2410_DEBUG
+	bool "Samsung S3C NAND driver debug"
+	depends on MTD_NAND_S3C2410
+	help
+	  Enable debugging of the S3C NAND driver
+
+config MTD_NAND_S3C2410_HWECC
+	bool "Samsung S3C NAND Hardware ECC"
+	depends on MTD_NAND_S3C2410
+	help
+	  Enable the use of the controller's internal ECC generator when
+	  using NAND. Early versions of the chips have had problems with
+	  incorrect ECC generation, and if using these, the default of
+	  software ECC is preferable.
+
+config MTD_NAND_NDFC
+	tristate "NDFC NanD Flash Controller"
+	depends on 4xx
+	select MTD_NAND_ECC_SMC
+	help
+	 NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
+
+config MTD_NAND_S3C2410_CLKSTOP
+	bool "Samsung S3C NAND IDLE clock stop"
+	depends on MTD_NAND_S3C2410
+	default n
+	help
+	  Stop the clock to the NAND controller when there is no chip
+	  selected to save power. This will mean there is a small delay
+	  when the is NAND chip selected or released, but will save
+	  approximately 5mA of power when there is nothing happening.
+
+config MTD_NAND_BCM_UMI
+	tristate "NAND Flash support for BCM Reference Boards"
+	depends on ARCH_BCMRING && MTD_NAND
+	help
+	  This enables the NAND flash controller on the BCM UMI block.
+
+	  No board specfic support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_BCM_UMI_HWCS
+	bool "BCM UMI NAND Hardware CS"
+	depends on MTD_NAND_BCM_UMI
+	help
+	  Enable the use of the BCM UMI block's internal CS using NAND.
+	  This should only be used if you know the external NAND CS can toggle.
+
+config MTD_NAND_DISKONCHIP
+	tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	select REED_SOLOMON
+	select REED_SOLOMON_DEC16
+	help
+	  This is a reimplementation of M-Systems DiskOnChip 2000,
+	  Millennium and Millennium Plus as a standard NAND device driver,
+	  as opposed to the earlier self-contained MTD device drivers.
+	  This should enable, among other things, proper JFFS2 operation on
+	  these devices.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+        bool "Advanced detection options for DiskOnChip"
+        depends on MTD_NAND_DISKONCHIP
+        help
+          This option allows you to specify nonstandard address at which to
+          probe for a DiskOnChip, or to change the detection options.  You
+          are unlikely to need any of this unless you are using LinuxBIOS.
+          Say 'N'.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
+        hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+        depends on MTD_NAND_DISKONCHIP
+        default "0"
+        ---help---
+        By default, the probe for DiskOnChip devices will look for a
+        DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+        This option allows you to specify a single address at which to probe
+        for the device, which is useful if you have other devices in that
+        range which get upset when they are probed.
+
+        (Note that on PowerPC, the normal probe will only check at
+        0xE4000000.)
+
+        Normally, you should leave this set to zero, to allow the probe at
+        the normal addresses.
+
+config MTD_NAND_DISKONCHIP_PROBE_HIGH
+        bool "Probe high addresses"
+        depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+        help
+          By default, the probe for DiskOnChip devices will look for a
+          DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+          This option changes to make it probe between 0xFFFC8000 and
+          0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
+          useful to you.  Say 'N'.
+
+config MTD_NAND_DISKONCHIP_BBTWRITE
+	bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
+	depends on MTD_NAND_DISKONCHIP
+	help
+	  On DiskOnChip devices shipped with the INFTL filesystem (Millennium
+	  and 2000 TSOP/Alon), Linux reserves some space at the end of the
+	  device for the Bad Block Table (BBT).  If you have existing INFTL
+	  data on your device (created by non-Linux tools such as M-Systems'
+	  DOS drivers), your data might overlap the area Linux wants to use for
+	  the BBT.  If this is a concern for you, leave this option disabled and
+	  Linux will not write BBT data into this area.
+	  The downside of leaving this option disabled is that if bad blocks
+	  are detected by Linux, they will not be recorded in the BBT, which
+	  could cause future problems.
+	  Once you enable this option, new filesystems (INFTL or others, created
+	  in Linux or other operating systems) will not use the reserved area.
+	  The only reason not to enable this option is to prevent damage to
+	  preexisting filesystems.
+	  Even if you leave this disabled, you can enable BBT writes at module
+	  load time (assuming you build diskonchip as a module) with the module
+	  parameter "inftl_bbt_write=1".
+
+config MTD_NAND_SHARPSL
+	tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
+	depends on ARCH_PXA
+
+config MTD_NAND_CAFE
+	tristate "NAND support for OLPC CAFÉ chip"
+	depends on PCI
+	select REED_SOLOMON
+	select REED_SOLOMON_DEC16
+	help
+	  Use NAND flash attached to the CAFÉ chip designed for the OLPC
+	  laptop.
+
+config MTD_NAND_CS553X
+	tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+	depends on X86_32
+	help
+	  The CS553x companion chips for the AMD Geode processor
+	  include NAND flash controllers with built-in hardware ECC
+	  capabilities; enabling this option will allow you to use
+	  these. The driver will check the MSRs to verify that the
+	  controller is enabled for NAND, and currently requires that
+	  the controller be in MMIO mode.
+
+	  If you say "m", the module will be called cs553x_nand.
+
+config MTD_NAND_ATMEL
+	tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
+	depends on ARCH_AT91 || AVR32
+	help
+	  Enables support for NAND Flash / Smart Media Card interface
+	  on Atmel AT91 and AVR32 processors.
+choice
+	prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
+	depends on MTD_NAND_ATMEL
+
+config MTD_NAND_ATMEL_ECC_HW
+	bool "Hardware ECC"
+	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
+	help
+	  Use hardware ECC instead of software ECC when the chip
+	  supports it.
+
+	  The hardware ECC controller is capable of single bit error
+	  correction and 2-bit random detection per page.
+
+	  NB : hardware and software ECC schemes are incompatible.
+	  If you switch from one to another, you'll have to erase your
+	  mtd partition.
+
+	  If unsure, say Y
+
+config MTD_NAND_ATMEL_ECC_SOFT
+	bool "Software ECC"
+	help
+	  Use software ECC.
+
+	  NB : hardware and software ECC schemes are incompatible.
+	  If you switch from one to another, you'll have to erase your
+	  mtd partition.
+
+config MTD_NAND_ATMEL_ECC_NONE
+	bool "No ECC (testing only, DANGEROUS)"
+	depends on DEBUG_KERNEL
+	help
+	  No ECC will be used.
+	  It's not a good idea and it should be reserved for testing
+	  purpose only.
+
+	  If unsure, say N
+
+endchoice
+
+config MTD_NAND_PXA3xx
+	tristate "Support for NAND flash devices on PXA3xx"
+	depends on MTD_NAND && (PXA3xx || ARCH_MMP)
+	help
+	  This enables the driver for the NAND flash device found on
+	  PXA3xx processors
+
+config MTD_NAND_PXA3xx_BUILTIN
+	bool "Use builtin definitions for some NAND chips (deprecated)"
+	depends on MTD_NAND_PXA3xx
+	help
+	  This enables builtin definitions for some NAND chips. This
+	  is deprecated in favor of platform specific data.
+
+config MTD_NAND_CM_X270
+	tristate "Support for NAND Flash on CM-X270 modules"
+	depends on MTD_NAND && MACH_ARMCORE
+
+config MTD_NAND_PASEMI
+	tristate "NAND support for PA Semi PWRficient"
+	depends on MTD_NAND && PPC_PASEMI
+	help
+	  Enables support for NAND Flash interface on PA Semi PWRficient
+	  based boards
+
+config MTD_NAND_TMIO
+	tristate "NAND Flash device on Toshiba Mobile IO Controller"
+	depends on MTD_NAND && MFD_TMIO
+	help
+	  Support for NAND flash connected to a Toshiba Mobile IO
+	  Controller in some PDAs, including the Sharp SL6000x.
+
+config MTD_NAND_NANDSIM
+	tristate "Support for NAND Flash Simulator"
+	depends on MTD_PARTITIONS
+	help
+	  The simulator may simulate various NAND flash chips for the
+	  MTD nand layer.
+
+config MTD_NAND_PLATFORM
+	tristate "Support for generic platform NAND driver"
+	depends on MTD_NAND
+	help
+	  This implements a generic NAND driver for on-SOC platform
+	  devices. You will need to provide platform-specific functions
+	  via platform_data.
+
+config MTD_ALAUDA
+	tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
+	depends on MTD_NAND && USB
+	help
+	  These two (and possibly other) Alauda-based cardreaders for
+	  SmartMedia and xD allow raw flash access.
+
+config MTD_NAND_ORION
+	tristate "NAND Flash support for Marvell Orion SoC"
+	depends on PLAT_ORION && MTD_NAND
+	help
+	  This enables the NAND flash controller on Orion machines.
+
+	  No board specific support is done by this driver, each board
+	  must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_FSL_ELBC
+	tristate "NAND support for Freescale eLBC controllers"
+	depends on MTD_NAND && PPC_OF
+	help
+	  Various Freescale chips, including the 8313, include a NAND Flash
+	  Controller Module with built-in hardware ECC capabilities.
+	  Enabling this option will enable you to use this to control
+	  external NAND devices.
+
+config MTD_NAND_FSL_UPM
+	tristate "Support for NAND on Freescale UPM"
+	depends on MTD_NAND && (PPC_83xx || PPC_85xx)
+	select FSL_LBC
+	help
+	  Enables support for NAND Flash chips wired onto Freescale PowerPC
+	  processor localbus with User-Programmable Machine support.
+
+config MTD_NAND_MPC5121_NFC
+	tristate "MPC5121 built-in NAND Flash Controller support"
+	depends on PPC_MPC512x
+	help
+	  This enables the driver for the NAND flash controller on the
+	  MPC5121 SoC.
+
+config MTD_NAND_MXC
+	tristate "MXC NAND support"
+	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
+	help
+	  This enables the driver for the NAND flash controller on the
+	  MXC processors.
+
+config MTD_NAND_NOMADIK
+	tristate "ST Nomadik 8815 NAND support"
+	depends on ARCH_NOMADIK
+	help
+	  Driver for the NAND flash controller on the Nomadik, with ECC.
+
+config MTD_NAND_SH_FLCTL
+	tristate "Support for NAND on Renesas SuperH FLCTL"
+	depends on MTD_NAND && (SUPERH || ARCH_SHMOBILE)
+	help
+	  Several Renesas SuperH CPU has FLCTL. This option enables support
+	  for NAND Flash using FLCTL.
+
+config MTD_NAND_DAVINCI
+        tristate "Support NAND on DaVinci SoC"
+        depends on ARCH_DAVINCI
+        help
+	  Enable the driver for NAND flash chips on Texas Instruments
+	  DaVinci processors.
+
+config MTD_NAND_TXX9NDFMC
+	tristate "NAND Flash support for TXx9 SoC"
+	depends on SOC_TX4938 || SOC_TX4939
+	help
+	  This enables the NAND flash controller on the TXx9 SoCs.
+
+config MTD_NAND_SOCRATES
+	tristate "Support for NAND on Socrates board"
+	depends on MTD_NAND && SOCRATES
+	help
+	  Enables support for NAND Flash chips wired onto Socrates board.
+
+config MTD_NAND_NUC900
+	tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
+	depends on ARCH_W90X900 && MTD_PARTITIONS
+	help
+	  This enables the driver for the NAND Flash on evaluation board based
+	  on w90p910 / NUC9xx.
+
+endif # MTD_NAND
diff -Nur linux-2.6.35.7.orig/drivers/mtd/nand/Makefile linux-2.6.35.7/drivers/mtd/nand/Makefile
--- linux-2.6.35.7.orig/drivers/mtd/nand/Makefile	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/mtd/nand/Makefile	2010-10-14 20:28:00.318093945 +0200
@@ -32,6 +32,7 @@
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
 obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
 obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
 obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
 obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
diff -Nur linux-2.6.35.7.orig/drivers/mtd/nand/Makefile.orig linux-2.6.35.7/drivers/mtd/nand/Makefile.orig
--- linux-2.6.35.7.orig/drivers/mtd/nand/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/mtd/nand/Makefile.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,50 @@
+#
+# linux/drivers/nand/Makefile
+#
+
+obj-$(CONFIG_MTD_NAND)			+= nand.o
+obj-$(CONFIG_MTD_NAND_ECC)		+= nand_ecc.o
+obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
+obj-$(CONFIG_MTD_SM_COMMON) 		+= sm_common.o
+
+obj-$(CONFIG_MTD_NAND_CAFE)		+= cafe_nand.o
+obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
+obj-$(CONFIG_MTD_NAND_AMS_DELTA)	+= ams-delta.o
+obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
+obj-$(CONFIG_MTD_NAND_DENALI)		+= denali.o
+obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
+obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
+obj-$(CONFIG_MTD_NAND_BF5XX)		+= bf5xx_nand.o
+obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB)	+= ppchameleonevb.o
+obj-$(CONFIG_MTD_NAND_S3C2410)		+= s3c2410.o
+obj-$(CONFIG_MTD_NAND_DAVINCI)		+= davinci_nand.o
+obj-$(CONFIG_MTD_NAND_DISKONCHIP)	+= diskonchip.o
+obj-$(CONFIG_MTD_NAND_H1900)		+= h1910.o
+obj-$(CONFIG_MTD_NAND_RTC_FROM4)	+= rtc_from4.o
+obj-$(CONFIG_MTD_NAND_SHARPSL)		+= sharpsl.o
+obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
+obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
+obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
+obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
+obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
+obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2.o
+obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
+obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
+obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
+obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
+obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
+obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
+obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_UPM)		+= fsl_upm.o
+obj-$(CONFIG_MTD_NAND_SH_FLCTL)		+= sh_flctl.o
+obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nand.o
+obj-$(CONFIG_MTD_NAND_SOCRATES)		+= socrates_nand.o
+obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
+obj-$(CONFIG_MTD_NAND_NUC900)		+= nuc900_nand.o
+obj-$(CONFIG_MTD_NAND_NOMADIK)		+= nomadik_nand.o
+obj-$(CONFIG_MTD_NAND_BCM_UMI)		+= bcm_umi_nand.o nand_bcm_umi.o
+obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
+obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
+
+nand-objs := nand_base.o nand_bbt.o
diff -Nur linux-2.6.35.7.orig/drivers/mtd/nand/rb4xx_nand.c linux-2.6.35.7/drivers/mtd/nand/rb4xx_nand.c
--- linux-2.6.35.7.orig/drivers/mtd/nand/rb4xx_nand.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/mtd/nand/rb4xx_nand.c	2010-10-14 20:28:34.515600563 +0200
@@ -0,0 +1,513 @@
+/*
+ *  NAND flash driver for the MikroTik RouterBoard 4xx series
+ *
+ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This file was based on the driver for Linux 2.6.22 published by
+ *  MikroTik for their RouterBoard 4xx series devices.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#define DRV_NAME        "rb4xx-nand"
+#define DRV_VERSION     "0.1.10"
+#define DRV_DESC        "NAND flash driver for RouterBoard 4xx series"
+
+#define USE_FAST_READ	1
+#define USE_FAST_WRITE	1
+#undef RB4XX_NAND_DEBUG
+
+#ifdef RB4XX_NAND_DEBUG
+#define DBG(fmt, arg...)	printk(KERN_DEBUG DRV_NAME ": " fmt, ## arg)
+#else
+#define DBG(fmt, arg...)	do {} while (0)
+#endif
+
+#define RB4XX_NAND_GPIO_RDY	5
+#define RB4XX_FLASH_HZ		33333334
+#define RB4XX_NAND_HZ		33333334
+
+#define SPI_CTRL_FASTEST	0x40
+#define SPI_CTRL_SAFE		0x43	/* 25 MHz for AHB 200 MHz */
+#define SBIT_IOC_BASE		SPI_IOC_CS1
+#define SBIT_IOC_DO_SHIFT	0
+#define SBIT_IOC_DO		(1u << SBIT_IOC_DO_SHIFT)
+#define SBIT_IOC_DO2_SHIFT	18
+#define SBIT_IOC_DO2		(1u << SBIT_IOC_DO2_SHIFT)
+
+#define CPLD_CMD_WRITE_MULT	0x08	/* send cmd, n x send data, read data */
+#define CPLD_CMD_WRITE_CFG	0x09	/* send cmd, n x send cfg */
+#define CPLD_CMD_READ_MULT	0x0a	/* send cmd, send idle, n x read data */
+#define CPLD_CMD_READ_FAST	0x0b	/* send cmd, 4 x idle, n x read data */
+
+#define CFG_BIT_nCE	0x80
+#define CFG_BIT_CLE	0x40
+#define CFG_BIT_ALE	0x20
+#define CFG_BIT_FAN	0x10
+#define CFG_BIT_nLED4	0x08
+#define CFG_BIT_nLED3	0x04
+#define CFG_BIT_nLED2	0x02
+#define CFG_BIT_nLED1	0x01
+
+#define CFG_BIT_nLEDS \
+	(CFG_BIT_nLED1 | CFG_BIT_nLED2 | CFG_BIT_nLED3 | CFG_BIT_nLED4)
+
+struct rb4xx_nand_info {
+	struct nand_chip	chip;
+	struct mtd_info		mtd;
+};
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load.
+ */
+static struct nand_ecclayout rb4xx_nand_ecclayout = {
+	.eccbytes	= 6,
+	.eccpos		= { 8, 9, 10, 13, 14, 15 },
+	.oobavail	= 9,
+	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static struct mtd_partition rb4xx_nand_partitions[] = {
+	{
+		.name	= "booter",
+		.offset	= 0,
+		.size	= (256 * 1024),
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name	= "kernel",
+		.offset	= (256 * 1024),
+		.size	= (4 * 1024 * 1024) - (256 * 1024),
+	},
+	{
+		.name	= "rootfs",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= (1024*1024*64) - (1024*256) - (4 * 1024 * 1024)
+	},
+	{
+		.name	= "cfgfs",
+		.offset	= (1024*1024*64) - (1024*256),
+		.size	= (1024*256),
+	},
+};
+
+#if USE_FAST_READ
+#define SPI_NDATA_BASE	0x00800000
+static unsigned spi_ctrl_fread = SPI_CTRL_SAFE;
+static unsigned spi_ctrl_flash = SPI_CTRL_SAFE;
+extern unsigned mips_hpt_frequency;
+#endif
+
+static inline unsigned rb4xx_spi_rreg(unsigned r)
+{
+	return __raw_readl((void * __iomem)(KSEG1ADDR(AR71XX_SPI_BASE) + r));
+}
+
+static inline void rb4xx_spi_wreg(unsigned r, unsigned v)
+{
+	__raw_writel(v, (void * __iomem)(KSEG1ADDR(AR71XX_SPI_BASE) + r));
+}
+
+static inline void do_spi_clk(int bit)
+{
+	unsigned bval = SBIT_IOC_BASE | (bit & 1);
+
+	rb4xx_spi_wreg(SPI_REG_IOC, bval);
+	rb4xx_spi_wreg(SPI_REG_IOC, bval | SPI_IOC_CLK);
+}
+
+static void do_spi_byte(uint8_t byte)
+{
+	do_spi_clk(byte >> 7);
+	do_spi_clk(byte >> 6);
+	do_spi_clk(byte >> 5);
+	do_spi_clk(byte >> 4);
+	do_spi_clk(byte >> 3);
+	do_spi_clk(byte >> 2);
+	do_spi_clk(byte >> 1);
+	do_spi_clk(byte);
+
+	DBG("spi_byte sent 0x%02x got 0x%x\n",
+					byte, rb4xx_spi_rreg(SPI_REG_RDS));
+}
+
+#if USE_FAST_WRITE
+static inline void do_spi_clk_fast(int bit1, int bit2)
+{
+	unsigned bval = (SBIT_IOC_BASE |
+			((bit1 << SBIT_IOC_DO_SHIFT) & SBIT_IOC_DO) |
+			((bit2 << SBIT_IOC_DO2_SHIFT) & SBIT_IOC_DO2));
+
+	rb4xx_spi_wreg(SPI_REG_IOC, bval);
+	rb4xx_spi_wreg(SPI_REG_IOC, bval | SPI_IOC_CLK);
+}
+
+static inline void do_spi_byte_fast(uint8_t byte)
+{
+	do_spi_clk_fast(byte >> 7, byte >> 6);
+	do_spi_clk_fast(byte >> 5, byte >> 4);
+	do_spi_clk_fast(byte >> 3, byte >> 2);
+	do_spi_clk_fast(byte >> 1, byte >> 0);
+
+	DBG("spi_byte_fast sent 0x%02x got 0x%x\n",
+					byte, rb4xx_spi_rreg(SPI_REG_RDS));
+}
+#else
+static inline void do_spi_byte_fast(uint8_t byte)
+{
+	do_spi_byte(byte);
+}
+#endif /* USE_FAST_WRITE */
+
+static int do_spi_cmd(unsigned cmd, unsigned sendCnt, const uint8_t *sendData,
+		unsigned recvCnt, uint8_t *recvData,
+		const uint8_t *verifyData, int fastWrite)
+{
+	unsigned i;
+
+	DBG("SPI cmd 0x%x send %u recv %u\n", cmd, sendCnt, recvCnt);
+
+	rb4xx_spi_wreg(SPI_REG_FS, SPI_FS_GPIO);
+	rb4xx_spi_wreg(SPI_REG_CTRL, SPI_CTRL_FASTEST);
+
+	do_spi_byte(cmd);
+#if 0
+	if (cmd == CPLD_CMD_READ_FAST) {
+		do_spi_byte(0x80);
+		do_spi_byte(0);
+		do_spi_byte(0);
+	}
+#endif
+	for (i = 0; i < sendCnt; ++i) {
+		if (fastWrite)
+			do_spi_byte_fast(sendData[i]);
+		else
+			do_spi_byte(sendData[i]);
+	}
+
+	for (i = 0; i < recvCnt; ++i) {
+		if (fastWrite)
+			do_spi_byte_fast(0);
+		else
+			do_spi_byte(0);
+
+		if (recvData) {
+			recvData[i] = rb4xx_spi_rreg(SPI_REG_RDS) & 0xff;
+		} else if (verifyData) {
+			if (verifyData[i] != (rb4xx_spi_rreg(SPI_REG_RDS)
+							 & 0xff))
+				break;
+		}
+	}
+
+	rb4xx_spi_wreg(SPI_REG_IOC, SBIT_IOC_BASE | SPI_IOC_CS0);
+	rb4xx_spi_wreg(SPI_REG_CTRL, spi_ctrl_flash);
+	rb4xx_spi_wreg(SPI_REG_FS, 0);
+
+	return i == recvCnt;
+}
+
+static int got_write = 1;
+
+static void rb4xx_nand_write_data(const uint8_t *byte, unsigned cnt)
+{
+	do_spi_cmd(CPLD_CMD_WRITE_MULT, cnt, byte, 1, NULL, NULL, 1);
+	got_write = 1;
+}
+
+static void rb4xx_nand_write_byte(uint8_t byte)
+{
+	rb4xx_nand_write_data(&byte, 1);
+}
+
+#if USE_FAST_READ
+static uint8_t *rb4xx_nand_read_getaddr(unsigned cnt)
+{
+	static unsigned nboffset = 0x100000;
+	unsigned addr;
+
+	if (got_write) {
+		nboffset = (nboffset + 31) & ~31;
+		if (nboffset >= 0x100000)	/* 1MB */
+			nboffset = 0;
+
+		got_write = 0;
+		rb4xx_spi_wreg(SPI_REG_FS, SPI_FS_GPIO);
+		rb4xx_spi_wreg(SPI_REG_CTRL, spi_ctrl_fread);
+		rb4xx_spi_wreg(SPI_REG_FS, 0);
+	}
+
+	addr = KSEG1ADDR(AR71XX_SPI_BASE + SPI_NDATA_BASE) + nboffset;
+	DBG("rb4xx_nand_read_getaddr 0x%x cnt 0x%x\n", addr, cnt);
+
+	nboffset += cnt;
+	return (uint8_t *)addr;
+}
+
+static void rb4xx_nand_read_data(uint8_t *buf, unsigned cnt)
+{
+	unsigned size32 = cnt & ~31;
+	unsigned remain = cnt & 31;
+
+	if (size32) {
+		uint8_t *addr = rb4xx_nand_read_getaddr(size32);
+		memcpy(buf, (void *)addr, size32);
+	}
+
+	if (remain) {
+		do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, remain,
+			   buf + size32, NULL, 0);
+	}
+}
+
+static int rb4xx_nand_verify_data(const uint8_t *buf, unsigned cnt)
+{
+	unsigned size32 = cnt & ~31;
+	unsigned remain = cnt & 31;
+
+	if (size32) {
+		uint8_t *addr = rb4xx_nand_read_getaddr(size32);
+		if (memcmp(buf, (void *)addr, size32) != 0)
+			return 0;
+	}
+
+	if (remain) {
+		return do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, remain,
+				  NULL, buf + size32, 0);
+	}
+	return 1;
+}
+#else /* USE_FAST_READ */
+static void rb4xx_nand_read_data(uint8_t *buf, unsigned cnt)
+{
+	do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, cnt, buf, NULL, 0);
+}
+
+static int rb4xx_nand_verify_data(const uint8_t *buf, unsigned cnt)
+{
+	return do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, cnt, NULL, buf, 0);
+}
+#endif /* USE_FAST_READ */
+
+static void rb4xx_nand_write_cfg(uint8_t byte)
+{
+	do_spi_cmd(CPLD_CMD_WRITE_CFG, 1, &byte, 0, NULL, NULL, 0);
+	got_write = 1;
+}
+
+static int rb4xx_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(RB4XX_NAND_GPIO_RDY);
+}
+
+static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				unsigned int ctrl)
+{
+	if (ctrl & NAND_CTRL_CHANGE) {
+		uint8_t cfg = CFG_BIT_nLEDS;
+
+		cfg |= (ctrl & NAND_CLE) ? CFG_BIT_CLE : 0;
+		cfg |= (ctrl & NAND_ALE) ? CFG_BIT_ALE : 0;
+		cfg |= (ctrl & NAND_NCE) ? 0 : CFG_BIT_nCE;
+
+		rb4xx_nand_write_cfg(cfg);
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		rb4xx_nand_write_byte(cmd);
+}
+
+static uint8_t rb4xx_nand_read_byte(struct mtd_info *mtd)
+{
+	uint8_t byte = 0;
+
+	rb4xx_nand_read_data(&byte, 1);
+	return byte;
+}
+
+static void rb4xx_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+				int len)
+{
+	rb4xx_nand_write_data(buf, len);
+}
+
+static void rb4xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf,
+				int len)
+{
+	rb4xx_nand_read_data(buf, len);
+}
+
+static int rb4xx_nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf,
+				int len)
+{
+	if (!rb4xx_nand_verify_data(buf, len))
+		return -EFAULT;
+
+	return 0;
+}
+
+static unsigned get_spi_ctrl(unsigned hz_max, const char *name)
+{
+	unsigned div;
+
+	div = (ar71xx_ahb_freq - 1) / (2 * hz_max);
+	/*
+	 * CPU has a bug at (div == 0) - first bit read is random
+	 */
+	if (div == 0)
+		++div;
+
+	if (name) {
+		unsigned ahb_khz = (ar71xx_ahb_freq + 500) / 1000;
+		unsigned div_real = 2 * (div + 1);
+		printk(KERN_INFO "%s SPI clock %u kHz (AHB %u kHz / %u)\n",
+		       name,
+		       ahb_khz / div_real,
+		       ahb_khz, div_real);
+	}
+
+	return SPI_CTRL_FASTEST + div;
+}
+
+static int __init rb4xx_nand_probe(struct platform_device *pdev)
+{
+	struct rb4xx_nand_info	*info;
+	int ret;
+
+	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
+
+	ret = gpio_request(RB4XX_NAND_GPIO_RDY, "NAND RDY");
+	if (ret) {
+		printk(KERN_ERR "rb4xx-nand: gpio request failed\n");
+		return ret;
+	}
+
+	ret = gpio_direction_input(RB4XX_NAND_GPIO_RDY);
+	if (ret) {
+		printk(KERN_ERR "rb4xx-nand: unable to set input mode "
+					"on gpio%d\n", RB4XX_NAND_GPIO_RDY);
+		goto err_free_gpio;
+	}
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		printk(KERN_ERR "rb4xx-nand: no memory for private data\n");
+		ret = -ENOMEM;
+		goto err_free_gpio;
+	}
+
+#if USE_FAST_READ
+	spi_ctrl_fread = get_spi_ctrl(RB4XX_NAND_HZ, "NAND");
+#endif
+	spi_ctrl_flash = get_spi_ctrl(RB4XX_FLASH_HZ, "FLASH");
+
+	rb4xx_nand_write_cfg(CFG_BIT_nLEDS | CFG_BIT_nCE);
+
+	info->chip.priv	= &info;
+	info->mtd.priv	= &info->chip;
+	info->mtd.owner	= THIS_MODULE;
+
+	info->chip.cmd_ctrl	= rb4xx_nand_cmd_ctrl;
+	info->chip.dev_ready	= rb4xx_nand_dev_ready;
+	info->chip.read_byte	= rb4xx_nand_read_byte;
+	info->chip.write_buf	= rb4xx_nand_write_buf;
+	info->chip.read_buf	= rb4xx_nand_read_buf;
+	info->chip.verify_buf	= rb4xx_nand_verify_buf;
+
+	info->chip.chip_delay	= 25;
+	info->chip.ecc.mode	= NAND_ECC_SOFT;
+	info->chip.options	|= NAND_NO_AUTOINCR;
+
+	platform_set_drvdata(pdev, info);
+
+	ret = nand_scan_ident(&info->mtd, 1, NULL);
+	if (ret) {
+		ret = -ENXIO;
+		goto err_free_info;
+	}
+
+	if (info->mtd.writesize == 512)
+		info->chip.ecc.layout = &rb4xx_nand_ecclayout;
+
+	ret = nand_scan_tail(&info->mtd);
+	if (ret) {
+		return -ENXIO;
+		goto err_set_drvdata;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ret = add_mtd_partitions(&info->mtd, rb4xx_nand_partitions,
+				ARRAY_SIZE(rb4xx_nand_partitions));
+#else
+	ret = add_mtd_device(&info->mtd);
+#endif
+	if (ret)
+		goto err_release_nand;
+
+	return 0;
+
+err_release_nand:
+	nand_release(&info->mtd);
+err_set_drvdata:
+	platform_set_drvdata(pdev, NULL);
+err_free_info:
+	kfree(info);
+err_free_gpio:
+	gpio_free(RB4XX_NAND_GPIO_RDY);
+	return ret;
+}
+
+static int __devexit rb4xx_nand_remove(struct platform_device *pdev)
+{
+	struct rb4xx_nand_info *info = platform_get_drvdata(pdev);
+
+	nand_release(&info->mtd);
+	platform_set_drvdata(pdev, NULL);
+	kfree(info);
+
+	return 0;
+}
+
+static struct platform_driver rb4xx_nand_driver = {
+	.probe	= rb4xx_nand_probe,
+	.remove	= __devexit_p(rb4xx_nand_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init rb4xx_nand_init(void)
+{
+	return platform_driver_register(&rb4xx_nand_driver);
+}
+
+static void __exit rb4xx_nand_exit(void)
+{
+	platform_driver_unregister(&rb4xx_nand_driver);
+}
+
+module_init(rb4xx_nand_init);
+module_exit(rb4xx_nand_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff -Nur linux-2.6.35.7.orig/drivers/mtd/nand/rb750_nand.c linux-2.6.35.7/drivers/mtd/nand/rb750_nand.c
--- linux-2.6.35.7.orig/drivers/mtd/nand/rb750_nand.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/mtd/nand/rb750_nand.c	2010-10-14 20:28:00.398101127 +0200
@@ -0,0 +1,360 @@
+/*
+ *  NAND flash driver for the MikroTik RouterBOARD 750
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/mach-rb750.h>
+
+#define DRV_NAME	"rb750-nand"
+#define DRV_VERSION	"0.1.0"
+#define DRV_DESC	"NAND flash driver for the RouterBOARD 750"
+
+#define RB750_NAND_IO0		BIT(RB750_GPIO_NAND_IO0)
+#define RB750_NAND_ALE		BIT(RB750_GPIO_NAND_ALE)
+#define RB750_NAND_CLE		BIT(RB750_GPIO_NAND_CLE)
+#define RB750_NAND_NRE		BIT(RB750_GPIO_NAND_NRE)
+#define RB750_NAND_NWE		BIT(RB750_GPIO_NAND_NWE)
+#define RB750_NAND_RDY		BIT(RB750_GPIO_NAND_RDY)
+#define RB750_NAND_NCE		BIT(RB750_GPIO_NAND_NCE)
+
+#define RB750_NAND_DATA_SHIFT	1
+#define RB750_NAND_DATA_BITS	(0xff << RB750_NAND_DATA_SHIFT)
+#define RB750_NAND_INPUT_BITS	(RB750_NAND_DATA_BITS | RB750_NAND_RDY)
+#define RB750_NAND_OUTPUT_BITS	(RB750_NAND_ALE | RB750_NAND_CLE | \
+				 RB750_NAND_NRE | RB750_NAND_NWE | \
+				 RB750_NAND_NCE)
+
+struct rb750_nand_info {
+	struct nand_chip	chip;
+	struct mtd_info		mtd;
+};
+
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load.
+ */
+static struct nand_ecclayout rb750_nand_ecclayout = {
+	.eccbytes	= 6,
+	.eccpos		= { 8, 9, 10, 13, 14, 15 },
+	.oobavail	= 9,
+	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+
+static struct mtd_partition rb750_nand_partitions[] = {
+	{
+		.name	= "booter",
+		.offset	= 0,
+		.size	= (256 * 1024),
+		.mask_flags = MTD_WRITEABLE,
+	}, {
+		.name	= "kernel",
+		.offset	= (256 * 1024),
+		.size	= (4 * 1024 * 1024) - (256 * 1024),
+	}, {
+		.name	= "rootfs",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static void rb750_nand_write(const u8 *buf, unsigned len)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	u32 out;
+	unsigned i;
+
+	/* set data lines to output mode */
+	__raw_writel(__raw_readl(base + GPIO_REG_OE) | RB750_NAND_DATA_BITS,
+		     base + GPIO_REG_OE);
+
+	out = __raw_readl(base + GPIO_REG_OUT);
+	out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE);
+	for (i = 0; i != len; i++) {
+		u32 data;
+
+		data = buf[i];
+		data <<= RB750_NAND_DATA_SHIFT;
+		data |= out;
+		__raw_writel(data, base + GPIO_REG_OUT);
+
+		__raw_writel(data | RB750_NAND_NWE, base + GPIO_REG_OUT);
+		/* flush write */
+		__raw_readl(base + GPIO_REG_OUT);
+	}
+
+	/* set data lines to input mode */
+	__raw_writel(__raw_readl(base + GPIO_REG_OE) & ~RB750_NAND_DATA_BITS,
+		     base + GPIO_REG_OE);
+	/* flush write */
+	__raw_readl(base + GPIO_REG_OE);
+}
+
+static int rb750_nand_read_verify(u8 *read_buf, unsigned len,
+				  const u8 *verify_buf)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	unsigned i;
+
+	for (i = 0; i < len; i++) {
+		u8 data;
+
+		/* activate RE line */
+		__raw_writel(RB750_NAND_NRE, base + GPIO_REG_CLEAR);
+		/* flush write */
+		__raw_readl(base + GPIO_REG_CLEAR);
+
+		/* read input lines */
+		data = __raw_readl(base + GPIO_REG_IN) >> RB750_NAND_DATA_SHIFT;
+
+		/* deactivate RE line */
+		__raw_writel(RB750_NAND_NRE, base + GPIO_REG_SET);
+
+		if (read_buf)
+			read_buf[i] = data;
+		else if (verify_buf && verify_buf[i] != data)
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static void rb750_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	u32 func;
+
+	func = __raw_readl(base + GPIO_REG_FUNC);
+	if (chip >= 0) {
+		/* disable latch */
+		rb750_latch_change(RB750_LVC573_LE, 0);
+
+		/* disable alternate functions */
+		ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+					   AR724X_GPIO_FUNC_SPI_EN);
+
+		/* set input mode for data lines */
+		__raw_writel(__raw_readl(base + GPIO_REG_OE) &
+			     ~RB750_NAND_INPUT_BITS,
+			     base + GPIO_REG_OE);
+
+		/* deactivate RE and WE lines */
+		__raw_writel(RB750_NAND_NRE | RB750_NAND_NWE,
+			     base + GPIO_REG_SET);
+		/* flush write */
+		(void) __raw_readl(base + GPIO_REG_SET);
+
+		/* activate CE line */
+		__raw_writel(RB750_NAND_NCE, base + GPIO_REG_CLEAR);
+	} else {
+		/* deactivate CE line */
+		__raw_writel(RB750_NAND_NCE, base + GPIO_REG_SET);
+		/* flush write */
+		(void) __raw_readl(base + GPIO_REG_SET);
+
+		__raw_writel(__raw_readl(base + GPIO_REG_OE) |
+			     RB750_NAND_IO0 | RB750_NAND_RDY,
+			     base + GPIO_REG_OE);
+
+		/* restore alternate functions */
+		ar71xx_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
+					   AR724X_GPIO_FUNC_JTAG_DISABLE);
+
+		/* enable latch */
+		rb750_latch_change(0, RB750_LVC573_LE);
+	}
+}
+
+static int rb750_nand_dev_ready(struct mtd_info *mtd)
+{
+	void __iomem *base = ar71xx_gpio_base;
+
+	return !!(__raw_readl(base + GPIO_REG_IN) & RB750_NAND_RDY);
+}
+
+static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				unsigned int ctrl)
+{
+	if (ctrl & NAND_CTRL_CHANGE) {
+		void __iomem *base = ar71xx_gpio_base;
+		u32 t;
+
+		t = __raw_readl(base + GPIO_REG_OUT);
+
+		t &= ~(RB750_NAND_CLE | RB750_NAND_ALE);
+		t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0;
+		t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0;
+
+		__raw_writel(t, base + GPIO_REG_OUT);
+		/* flush write */
+		__raw_readl(base + GPIO_REG_OUT);
+	}
+
+	if (cmd != NAND_CMD_NONE) {
+		u8 t = cmd;
+		rb750_nand_write(&t, 1);
+	}
+}
+
+static u8 rb750_nand_read_byte(struct mtd_info *mtd)
+{
+	u8 data = 0;
+	rb750_nand_read_verify(&data, 1, NULL);
+	return data;
+}
+
+static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+	rb750_nand_read_verify(buf, len, NULL);
+}
+
+static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	rb750_nand_write(buf, len);
+}
+
+static int rb750_nand_verify_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	return rb750_nand_read_verify(NULL, len, buf);
+}
+
+static void __init rb750_nand_gpio_init(void)
+{
+	void __iomem *base = ar71xx_gpio_base;
+	u32 out;
+
+	out = __raw_readl(base + GPIO_REG_OUT);
+
+	/* setup output levels */
+	__raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE,
+		     base + GPIO_REG_SET);
+
+	__raw_writel(RB750_NAND_ALE | RB750_NAND_CLE,
+		     base + GPIO_REG_CLEAR);
+
+	/* setup input lines */
+	__raw_writel(__raw_readl(base + GPIO_REG_OE) & ~(RB750_NAND_INPUT_BITS),
+		     base + GPIO_REG_OE);
+
+	/* setup output lines */
+	__raw_writel(__raw_readl(base + GPIO_REG_OE) | RB750_NAND_OUTPUT_BITS,
+		     base + GPIO_REG_OE);
+
+	rb750_latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0);
+}
+
+static int __init rb750_nand_probe(struct platform_device *pdev)
+{
+	struct rb750_nand_info	*info;
+	int ret;
+
+	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
+
+	rb750_nand_gpio_init();
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->chip.priv	= &info;
+	info->mtd.priv	= &info->chip;
+	info->mtd.owner	= THIS_MODULE;
+
+	info->chip.select_chip	= rb750_nand_select_chip;
+	info->chip.cmd_ctrl	= rb750_nand_cmd_ctrl;
+	info->chip.dev_ready	= rb750_nand_dev_ready;
+	info->chip.read_byte	= rb750_nand_read_byte;
+	info->chip.write_buf	= rb750_nand_write_buf;
+	info->chip.read_buf	= rb750_nand_read_buf;
+	info->chip.verify_buf	= rb750_nand_verify_buf;
+
+	info->chip.chip_delay	= 25;
+	info->chip.ecc.mode	= NAND_ECC_SOFT;
+	info->chip.options	|= NAND_NO_AUTOINCR;
+
+	platform_set_drvdata(pdev, info);
+
+	ret = nand_scan_ident(&info->mtd, 1);
+	if (ret) {
+		ret = -ENXIO;
+		goto err_free_info;
+	}
+
+	if (info->mtd.writesize == 512)
+		info->chip.ecc.layout = &rb750_nand_ecclayout;
+
+	ret = nand_scan_tail(&info->mtd);
+	if (ret) {
+		return -ENXIO;
+		goto err_set_drvdata;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ret = add_mtd_partitions(&info->mtd, rb750_nand_partitions,
+				 ARRAY_SIZE(rb750_nand_partitions));
+#else
+	ret = add_mtd_device(&info->mtd);
+#endif
+	if (ret)
+		goto err_release_nand;
+
+	return 0;
+
+ err_release_nand:
+	nand_release(&info->mtd);
+ err_set_drvdata:
+	platform_set_drvdata(pdev, NULL);
+ err_free_info:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit rb750_nand_remove(struct platform_device *pdev)
+{
+	struct rb750_nand_info *info = platform_get_drvdata(pdev);
+
+	nand_release(&info->mtd);
+	platform_set_drvdata(pdev, NULL);
+	kfree(info);
+
+	return 0;
+}
+
+static struct platform_driver rb750_nand_driver = {
+	.probe	= rb750_nand_probe,
+	.remove	= __devexit_p(rb750_nand_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init rb750_nand_init(void)
+{
+	return platform_driver_register(&rb750_nand_driver);
+}
+
+static void __exit rb750_nand_exit(void)
+{
+	platform_driver_unregister(&rb750_nand_driver);
+}
+
+module_init(rb750_nand_init);
+module_exit(rb750_nand_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff -Nur linux-2.6.35.7.orig/drivers/mtd/wrt160nl_part.c linux-2.6.35.7/drivers/mtd/wrt160nl_part.c
--- linux-2.6.35.7.orig/drivers/mtd/wrt160nl_part.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/mtd/wrt160nl_part.c	2010-10-14 20:28:00.438101171 +0200
@@ -0,0 +1,181 @@
+/*
+ * Copyright (C) 2009 Christian Daniel <cd@maintech.de>
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * TRX flash partition table.
+ * Based on ar7 map by Felix Fietkau <nbd@openwrt.org>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct cybertan_header {
+	char	magic[4];
+	u8	res1[4];
+	char	fw_date[3];
+	char	fw_ver[3];
+	char	id[4];
+	char	hw_ver;
+	char	unused;
+	u8	flags[2];
+	u8	res2[10];
+};
+
+#define TRX_PARTS	6
+#define TRX_MAGIC	0x30524448
+#define TRX_MAX_OFFSET	3
+
+struct trx_header {
+	uint32_t magic;           /* "HDR0" */
+	uint32_t len;             /* Length of file including header */
+	uint32_t crc32;           /* 32-bit CRC from flag_version to end of file */
+	uint32_t flag_version;    /* 0:15 flags, 16:31 version */
+	uint32_t offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
+};
+
+#define IH_MAGIC	0x27051956	/* Image Magic Number */
+#define IH_NMLEN	32		/* Image Name Length */
+
+struct uimage_header {
+	uint32_t	ih_magic;	/* Image Header Magic Number */
+	uint32_t	ih_hcrc;	/* Image Header CRC Checksum */
+	uint32_t	ih_time;	/* Image Creation Timestamp */
+	uint32_t	ih_size;	/* Image Data Size */
+	uint32_t	ih_load;	/* Data» Load  Address */
+	uint32_t	ih_ep;		/* Entry Point Address */
+	uint32_t	ih_dcrc;	/* Image Data CRC Checksum */
+	uint8_t		ih_os;		/* Operating System */
+	uint8_t		ih_arch;	/* CPU architecture */
+	uint8_t		ih_type;	/* Image Type */
+	uint8_t		ih_comp;	/* Compression Type */
+	uint8_t		ih_name[IH_NMLEN];	/* Image Name */
+};
+
+struct wrt160nl_header {
+	struct cybertan_header	cybertan;
+	struct trx_header	trx;
+	struct uimage_header	uimage;
+} __attribute__ ((packed));
+
+static struct mtd_partition trx_parts[TRX_PARTS];
+
+static int wrt160nl_parse_partitions(struct mtd_info *master,
+				     struct mtd_partition **pparts,
+				     unsigned long origin)
+{
+	struct wrt160nl_header *header;
+	struct trx_header *theader;
+	struct uimage_header *uheader;
+	size_t retlen;
+	unsigned int kernel_len;
+	int ret;
+
+	header = vmalloc(sizeof(*header));
+	if (!header) {
+		return -ENOMEM;
+		goto out;
+	}
+
+	ret = master->read(master, 4 * master->erasesize, sizeof(*header),
+			   &retlen, (void *) header);
+	if (ret)
+		goto free_hdr;
+
+	if (retlen != sizeof(*header)) {
+		ret = -EIO;
+		goto free_hdr;
+	}
+
+	if (strncmp(header->cybertan.magic, "NL16", 4) != 0) {
+		printk(KERN_NOTICE "%s: no WRT160NL signature found\n",
+			master->name);
+		goto free_hdr;
+	}
+
+	theader = &header->trx;
+	if (le32_to_cpu(theader->magic) != TRX_MAGIC) {
+		printk(KERN_NOTICE "%s: no TRX header found\n", master->name);
+		goto free_hdr;
+	}
+
+	uheader = &header->uimage;
+	if (uheader->ih_magic != IH_MAGIC) {
+		printk(KERN_NOTICE "%s: no uImage found\n", master->name);
+		goto free_hdr;
+	}
+
+	kernel_len = le32_to_cpu(theader->offsets[1]) + sizeof(struct cybertan_header);
+
+	trx_parts[0].name = "u-boot";
+	trx_parts[0].offset = 0;
+	trx_parts[0].size = 4 * master->erasesize;
+	trx_parts[0].mask_flags = MTD_WRITEABLE;
+
+	trx_parts[1].name = "kernel";
+	trx_parts[1].offset = trx_parts[0].offset + trx_parts[0].size;
+	trx_parts[1].size = kernel_len;
+	trx_parts[1].mask_flags = 0;
+
+	trx_parts[2].name = "rootfs";
+	trx_parts[2].offset = trx_parts[1].offset + trx_parts[1].size;
+	trx_parts[2].size = master->size - 6 * master->erasesize - trx_parts[1].size;
+	trx_parts[2].mask_flags = 0;
+
+	trx_parts[3].name = "nvram";
+	trx_parts[3].offset = master->size - 2 * master->erasesize;
+	trx_parts[3].size = master->erasesize;
+	trx_parts[3].mask_flags = MTD_WRITEABLE;
+
+	trx_parts[4].name = "art";
+	trx_parts[4].offset = master->size - master->erasesize;
+	trx_parts[4].size = master->erasesize;
+	trx_parts[4].mask_flags = MTD_WRITEABLE;
+
+	trx_parts[5].name = "firmware";
+	trx_parts[5].offset = 4 * master->erasesize;
+	trx_parts[5].size = master->size - 6 * master->erasesize;
+	trx_parts[5].mask_flags = 0;
+
+	*pparts = trx_parts;
+	ret = TRX_PARTS;
+
+ free_hdr:
+	vfree(header);
+ out:
+	return ret;
+}
+
+static struct mtd_part_parser wrt160nl_parser = {
+	.owner		= THIS_MODULE,
+	.parse_fn	= wrt160nl_parse_partitions,
+	.name		= "wrt160nl",
+};
+
+static int __init wrt160nl_parser_init(void)
+{
+	return register_mtd_parser(&wrt160nl_parser);
+}
+
+module_init(wrt160nl_parser_init);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Daniel <cd@maintech.de>");
diff -Nur linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_ar8216.c linux-2.6.35.7/drivers/net/ag71xx/ag71xx_ar8216.c
--- linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_ar8216.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/ag71xx/ag71xx_ar8216.c	2010-10-14 20:28:00.478101179 +0200
@@ -0,0 +1,44 @@
+/*
+ *  Atheros AR71xx built-in ethernet mac driver
+ *  Special support for the Atheros ar8216 switch chip
+ *
+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  Based on Atheros' AG7100 driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+#define AR8216_PACKET_TYPE_MASK		0xf
+#define AR8216_PACKET_TYPE_NORMAL	0
+
+#define AR8216_HEADER_LEN	2
+
+void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb)
+{
+	skb_push(skb, AR8216_HEADER_LEN);
+	skb->data[0] = 0x10;
+	skb->data[1] = 0x80;
+}
+
+int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
+				int pktlen)
+{
+	u8 type;
+
+	type = skb->data[1] & AR8216_PACKET_TYPE_MASK;
+	switch (type) {
+	case AR8216_PACKET_TYPE_NORMAL:
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	skb_pull(skb, AR8216_HEADER_LEN);
+	return 0;
+}
diff -Nur linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_debugfs.c linux-2.6.35.7/drivers/net/ag71xx/ag71xx_debugfs.c
--- linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_debugfs.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/ag71xx/ag71xx_debugfs.c	2010-10-14 20:28:00.514356373 +0200
@@ -0,0 +1,197 @@
+/*
+ *  Atheros AR71xx built-in ethernet mac driver
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Based on Atheros' AG7100 driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/debugfs.h>
+
+#include "ag71xx.h"
+
+static struct dentry *ag71xx_debugfs_root;
+
+static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status)
+{
+	if (status)
+		ag->debug.int_stats.total++;
+	if (status & AG71XX_INT_TX_PS)
+		ag->debug.int_stats.tx_ps++;
+	if (status & AG71XX_INT_TX_UR)
+		ag->debug.int_stats.tx_ur++;
+	if (status & AG71XX_INT_TX_BE)
+		ag->debug.int_stats.tx_be++;
+	if (status & AG71XX_INT_RX_PR)
+		ag->debug.int_stats.rx_pr++;
+	if (status & AG71XX_INT_RX_OF)
+		ag->debug.int_stats.rx_of++;
+	if (status & AG71XX_INT_RX_BE)
+		ag->debug.int_stats.rx_be++;
+}
+
+static ssize_t read_file_int_stats(struct file *file, char __user *user_buf,
+				   size_t count, loff_t *ppos)
+{
+#define PR_INT_STAT(_label, _field) 					\
+	len += snprintf(buf + len, sizeof(buf) - len, 			\
+		"%20s: %10lu\n", _label, ag->debug.int_stats._field);
+
+	struct ag71xx *ag = file->private_data;
+	char buf[256];
+	unsigned int len = 0;
+
+	PR_INT_STAT("TX Packet Sent", tx_ps);
+	PR_INT_STAT("TX Underrun", tx_ur);
+	PR_INT_STAT("TX Bus Error", tx_be);
+	PR_INT_STAT("RX Packet Received", rx_pr);
+	PR_INT_STAT("RX Overflow", rx_of);
+	PR_INT_STAT("RX Bus Error", rx_be);
+	len += snprintf(buf + len, sizeof(buf) - len, "\n");
+	PR_INT_STAT("Total", total);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+#undef PR_INT_STAT
+}
+
+static const struct file_operations ag71xx_fops_int_stats = {
+	.open	= ag71xx_debugfs_generic_open,
+	.read	= read_file_int_stats,
+	.owner	= THIS_MODULE
+};
+
+void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx)
+{
+	struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
+
+	if (rx) {
+		stats->rx_count++;
+		stats->rx_packets += rx;
+		if (rx <= AG71XX_NAPI_WEIGHT)
+			stats->rx[rx]++;
+		if (rx > stats->rx_packets_max)
+			stats->rx_packets_max = rx;
+	}
+
+	if (tx) {
+		stats->tx_count++;
+		stats->tx_packets += tx;
+		if (tx <= AG71XX_NAPI_WEIGHT)
+			stats->tx[tx]++;
+		if (tx > stats->tx_packets_max)
+			stats->tx_packets_max = tx;
+	}
+}
+
+static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct ag71xx *ag = file->private_data;
+	struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
+	char buf[2048];
+	unsigned int len = 0;
+	unsigned long rx_avg = 0;
+	unsigned long tx_avg = 0;
+	int i;
+
+	if (stats->rx_count)
+		rx_avg = stats->rx_packets / stats->rx_count;
+
+	if (stats->tx_count)
+		tx_avg = stats->tx_packets / stats->tx_count;
+
+	len += snprintf(buf + len, sizeof(buf) - len, "%3s  %10s %10s\n",
+			"len", "rx", "tx");
+
+	for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++)
+		len += snprintf(buf + len, sizeof(buf) - len,
+				"%3d: %10lu %10lu\n",
+				i, stats->rx[i], stats->tx[i]);
+
+	len += snprintf(buf + len, sizeof(buf) - len, "\n");
+
+	len += snprintf(buf + len, sizeof(buf) - len, "%3s: %10lu %10lu\n",
+			"sum", stats->rx_count, stats->tx_count);
+	len += snprintf(buf + len, sizeof(buf) - len, "%3s: %10lu %10lu\n",
+			"avg", rx_avg, tx_avg);
+	len += snprintf(buf + len, sizeof(buf) - len, "%3s: %10lu %10lu\n",
+			"max", stats->rx_packets_max, stats->tx_packets_max);
+	len += snprintf(buf + len, sizeof(buf) - len, "%3s: %10lu %10lu\n",
+			"pkt", stats->rx_packets, stats->tx_packets);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static const struct file_operations ag71xx_fops_napi_stats = {
+	.open	= ag71xx_debugfs_generic_open,
+	.read	= read_file_napi_stats,
+	.owner	= THIS_MODULE
+};
+
+void ag71xx_debugfs_exit(struct ag71xx *ag)
+{
+	debugfs_remove(ag->debug.debugfs_napi_stats);
+	debugfs_remove(ag->debug.debugfs_int_stats);
+	debugfs_remove(ag->debug.debugfs_dir);
+}
+
+int ag71xx_debugfs_init(struct ag71xx *ag)
+{
+	ag->debug.debugfs_dir = debugfs_create_dir(ag->dev->name,
+						   ag71xx_debugfs_root);
+	if (!ag->debug.debugfs_dir)
+		goto err;
+
+	ag->debug.debugfs_int_stats =
+			debugfs_create_file("int_stats",
+					    S_IRUGO,
+					    ag->debug.debugfs_dir,
+					    ag,
+					    &ag71xx_fops_int_stats);
+	if (!ag->debug.debugfs_int_stats)
+		goto err;
+
+	ag->debug.debugfs_napi_stats =
+			debugfs_create_file("napi_stats",
+					    S_IRUGO,
+					    ag->debug.debugfs_dir,
+					    ag,
+					    &ag71xx_fops_napi_stats);
+	if (!ag->debug.debugfs_napi_stats)
+		goto err;
+
+	return 0;
+
+ err:
+	ag71xx_debugfs_exit(ag);
+	return -ENOMEM;
+}
+
+int ag71xx_debugfs_root_init(void)
+{
+	if (ag71xx_debugfs_root)
+		return -EBUSY;
+
+	ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+	if (!ag71xx_debugfs_root)
+		return -ENOENT;
+
+	return 0;
+}
+
+void ag71xx_debugfs_root_exit(void)
+{
+	debugfs_remove(ag71xx_debugfs_root);
+	ag71xx_debugfs_root = NULL;
+}
diff -Nur linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_ethtool.c linux-2.6.35.7/drivers/net/ag71xx/ag71xx_ethtool.c
--- linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_ethtool.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/ag71xx/ag71xx_ethtool.c	2010-10-14 20:28:00.558101160 +0200
@@ -0,0 +1,71 @@
+/*
+ *  Atheros AR71xx built-in ethernet mac driver
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Based on Atheros' AG7100 driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+static int ag71xx_ethtool_get_settings(struct net_device *dev,
+				       struct ethtool_cmd *cmd)
+{
+	struct ag71xx *ag = netdev_priv(dev);
+	struct phy_device *phydev = ag->phy_dev;
+
+	if (!phydev)
+		return -ENODEV;
+
+	return phy_ethtool_gset(phydev, cmd);
+}
+
+static int ag71xx_ethtool_set_settings(struct net_device *dev,
+				       struct ethtool_cmd *cmd)
+{
+	struct ag71xx *ag = netdev_priv(dev);
+	struct phy_device *phydev = ag->phy_dev;
+
+	if (!phydev)
+		return -ENODEV;
+
+	return phy_ethtool_sset(phydev, cmd);
+}
+
+static void ag71xx_ethtool_get_drvinfo(struct net_device *dev,
+				       struct ethtool_drvinfo *info)
+{
+	struct ag71xx *ag = netdev_priv(dev);
+
+	strcpy(info->driver, ag->pdev->dev.driver->name);
+	strcpy(info->version, AG71XX_DRV_VERSION);
+	strcpy(info->bus_info, dev_name(&ag->pdev->dev));
+}
+
+static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev)
+{
+	struct ag71xx *ag = netdev_priv(dev);
+
+	return ag->msg_enable;
+}
+
+static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level)
+{
+	struct ag71xx *ag = netdev_priv(dev);
+
+	ag->msg_enable = msg_level;
+}
+
+struct ethtool_ops ag71xx_ethtool_ops = {
+	.set_settings	= ag71xx_ethtool_set_settings,
+	.get_settings	= ag71xx_ethtool_get_settings,
+	.get_drvinfo	= ag71xx_ethtool_get_drvinfo,
+	.get_msglevel	= ag71xx_ethtool_get_msglevel,
+	.set_msglevel	= ag71xx_ethtool_set_msglevel,
+	.get_link	= ethtool_op_get_link,
+};
diff -Nur linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx.h linux-2.6.35.7/drivers/net/ag71xx/ag71xx.h
--- linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/ag71xx/ag71xx.h	2010-10-14 20:28:00.594356402 +0200
@@ -0,0 +1,500 @@
+/*
+ *  Atheros AR71xx built-in ethernet mac driver
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Based on Atheros' AG7100 driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef __AG71XX_H
+#define __AG71XX_H
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/random.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/phy.h>
+#include <linux/skbuff.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+
+#include <linux/bitops.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/platform.h>
+
+#define ETH_FCS_LEN	4
+
+#define AG71XX_DRV_NAME		"ag71xx"
+#define AG71XX_DRV_VERSION	"0.5.35"
+
+#define AG71XX_NAPI_WEIGHT	64
+#define AG71XX_OOM_REFILL	(1 + HZ/10)
+
+#define AG71XX_INT_ERR	(AG71XX_INT_RX_BE | AG71XX_INT_TX_BE)
+#define AG71XX_INT_TX	(AG71XX_INT_TX_PS)
+#define AG71XX_INT_RX	(AG71XX_INT_RX_PR | AG71XX_INT_RX_OF)
+
+#define AG71XX_INT_POLL	(AG71XX_INT_RX | AG71XX_INT_TX)
+#define AG71XX_INT_INIT	(AG71XX_INT_ERR | AG71XX_INT_POLL)
+
+#define AG71XX_TX_FIFO_LEN	2048
+#define AG71XX_TX_MTU_LEN	1536
+#define AG71XX_RX_PKT_RESERVE	64
+#define AG71XX_RX_PKT_SIZE	\
+	(AG71XX_RX_PKT_RESERVE + ETH_HLEN + ETH_FRAME_LEN + ETH_FCS_LEN)
+
+#define AG71XX_TX_RING_SIZE	64
+#define AG71XX_TX_THRES_STOP	(AG71XX_TX_RING_SIZE - 4)
+#define AG71XX_TX_THRES_WAKEUP	\
+		(AG71XX_TX_RING_SIZE - (AG71XX_TX_RING_SIZE / 4))
+
+#define AG71XX_RX_RING_SIZE	128
+
+#ifdef CONFIG_AG71XX_DEBUG
+#define DBG(fmt, args...)	printk(KERN_DEBUG fmt, ## args)
+#else
+#define DBG(fmt, args...)	do {} while (0)
+#endif
+
+#define ag71xx_assert(_cond)						\
+do {									\
+	if (_cond)							\
+		break;							\
+	printk("%s,%d: assertion failed\n", __FILE__, __LINE__);	\
+	BUG();								\
+} while (0)
+
+struct ag71xx_desc {
+	u32	data;
+	u32	ctrl;
+#define DESC_EMPTY	BIT(31)
+#define DESC_MORE	BIT(24)
+#define DESC_PKTLEN_M	0xfff
+	u32	next;
+	u32	pad;
+} __attribute__((aligned(4)));
+
+struct ag71xx_buf {
+	struct sk_buff		*skb;
+	struct ag71xx_desc 	*desc;
+	dma_addr_t		dma_addr;
+	u32			pad;
+};
+
+struct ag71xx_ring {
+	struct ag71xx_buf	*buf;
+	u8			*descs_cpu;
+	dma_addr_t		descs_dma;
+	unsigned int		desc_size;
+	unsigned int		curr;
+	unsigned int		dirty;
+	unsigned int		size;
+};
+
+struct ag71xx_mdio {
+	struct mii_bus		*mii_bus;
+	int			mii_irq[PHY_MAX_ADDR];
+	void __iomem		*mdio_base;
+	struct ag71xx_mdio_platform_data *pdata;
+};
+
+struct ag71xx_int_stats {
+	unsigned long		rx_pr;
+	unsigned long		rx_be;
+	unsigned long		rx_of;
+	unsigned long		tx_ps;
+	unsigned long		tx_be;
+	unsigned long		tx_ur;
+	unsigned long		total;
+};
+
+struct ag71xx_napi_stats {
+	unsigned long		napi_calls;
+	unsigned long		rx_count;
+	unsigned long		rx_packets;
+	unsigned long		rx_packets_max;
+	unsigned long		tx_count;
+	unsigned long		tx_packets;
+	unsigned long		tx_packets_max;
+
+	unsigned long		rx[AG71XX_NAPI_WEIGHT + 1];
+	unsigned long		tx[AG71XX_NAPI_WEIGHT + 1];
+};
+
+struct ag71xx_debug {
+	struct dentry		*debugfs_dir;
+	struct dentry		*debugfs_int_stats;
+	struct dentry		*debugfs_napi_stats;
+
+	struct ag71xx_int_stats int_stats;
+	struct ag71xx_napi_stats napi_stats;
+};
+
+struct ag71xx {
+	void __iomem		*mac_base;
+	void __iomem		*mii_ctrl;
+
+	spinlock_t		lock;
+	struct platform_device	*pdev;
+	struct net_device	*dev;
+	struct napi_struct	napi;
+	u32			msg_enable;
+
+	struct ag71xx_ring	rx_ring;
+	struct ag71xx_ring	tx_ring;
+
+	struct mii_bus		*mii_bus;
+	struct phy_device	*phy_dev;
+
+	unsigned int		link;
+	unsigned int		speed;
+	int 			duplex;
+
+	struct work_struct	restart_work;
+	struct timer_list	oom_timer;
+
+#ifdef CONFIG_AG71XX_DEBUG_FS
+	struct ag71xx_debug	debug;
+#endif
+};
+
+extern struct ethtool_ops ag71xx_ethtool_ops;
+void ag71xx_link_adjust(struct ag71xx *ag);
+
+int ag71xx_mdio_driver_init(void) __init;
+void ag71xx_mdio_driver_exit(void);
+
+int ag71xx_phy_connect(struct ag71xx *ag);
+void ag71xx_phy_disconnect(struct ag71xx *ag);
+void ag71xx_phy_start(struct ag71xx *ag);
+void ag71xx_phy_stop(struct ag71xx *ag);
+
+static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag)
+{
+	return ag->pdev->dev.platform_data;
+}
+
+static inline int ag71xx_desc_empty(struct ag71xx_desc *desc)
+{
+	return ((desc->ctrl & DESC_EMPTY) != 0);
+}
+
+static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc)
+{
+	return (desc->ctrl & DESC_PKTLEN_M);
+}
+
+/* Register offsets */
+#define AG71XX_REG_MAC_CFG1	0x0000
+#define AG71XX_REG_MAC_CFG2	0x0004
+#define AG71XX_REG_MAC_IPG	0x0008
+#define AG71XX_REG_MAC_HDX	0x000c
+#define AG71XX_REG_MAC_MFL	0x0010
+#define AG71XX_REG_MII_CFG	0x0020
+#define AG71XX_REG_MII_CMD	0x0024
+#define AG71XX_REG_MII_ADDR	0x0028
+#define AG71XX_REG_MII_CTRL	0x002c
+#define AG71XX_REG_MII_STATUS	0x0030
+#define AG71XX_REG_MII_IND	0x0034
+#define AG71XX_REG_MAC_IFCTL	0x0038
+#define AG71XX_REG_MAC_ADDR1	0x0040
+#define AG71XX_REG_MAC_ADDR2	0x0044
+#define AG71XX_REG_FIFO_CFG0	0x0048
+#define AG71XX_REG_FIFO_CFG1	0x004c
+#define AG71XX_REG_FIFO_CFG2	0x0050
+#define AG71XX_REG_FIFO_CFG3	0x0054
+#define AG71XX_REG_FIFO_CFG4	0x0058
+#define AG71XX_REG_FIFO_CFG5	0x005c
+#define AG71XX_REG_FIFO_RAM0	0x0060
+#define AG71XX_REG_FIFO_RAM1	0x0064
+#define AG71XX_REG_FIFO_RAM2	0x0068
+#define AG71XX_REG_FIFO_RAM3	0x006c
+#define AG71XX_REG_FIFO_RAM4	0x0070
+#define AG71XX_REG_FIFO_RAM5	0x0074
+#define AG71XX_REG_FIFO_RAM6	0x0078
+#define AG71XX_REG_FIFO_RAM7	0x007c
+
+#define AG71XX_REG_TX_CTRL	0x0180
+#define AG71XX_REG_TX_DESC	0x0184
+#define AG71XX_REG_TX_STATUS	0x0188
+#define AG71XX_REG_RX_CTRL	0x018c
+#define AG71XX_REG_RX_DESC	0x0190
+#define AG71XX_REG_RX_STATUS	0x0194
+#define AG71XX_REG_INT_ENABLE	0x0198
+#define AG71XX_REG_INT_STATUS	0x019c
+
+#define MAC_CFG1_TXE		BIT(0)	/* Tx Enable */
+#define MAC_CFG1_STX		BIT(1)	/* Synchronize Tx Enable */
+#define MAC_CFG1_RXE		BIT(2)	/* Rx Enable */
+#define MAC_CFG1_SRX		BIT(3)	/* Synchronize Rx Enable */
+#define MAC_CFG1_TFC		BIT(4)	/* Tx Flow Control Enable */
+#define MAC_CFG1_RFC		BIT(5)	/* Rx Flow Control Enable */
+#define MAC_CFG1_LB		BIT(8)	/* Loopback mode */
+#define MAC_CFG1_SR		BIT(31)	/* Soft Reset */
+
+#define MAC_CFG2_FDX		BIT(0)
+#define MAC_CFG2_CRC_EN		BIT(1)
+#define MAC_CFG2_PAD_CRC_EN	BIT(2)
+#define MAC_CFG2_LEN_CHECK	BIT(4)
+#define MAC_CFG2_HUGE_FRAME_EN	BIT(5)
+#define MAC_CFG2_IF_1000	BIT(9)
+#define MAC_CFG2_IF_10_100	BIT(8)
+
+#define FIFO_CFG0_WTM		BIT(0)	/* Watermark Module */
+#define FIFO_CFG0_RXS		BIT(1)	/* Rx System Module */
+#define FIFO_CFG0_RXF		BIT(2)	/* Rx Fabric Module */
+#define FIFO_CFG0_TXS		BIT(3)	/* Tx System Module */
+#define FIFO_CFG0_TXF		BIT(4)	/* Tx Fabric Module */
+#define FIFO_CFG0_ALL	(FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
+			| FIFO_CFG0_TXS | FIFO_CFG0_TXF)
+
+#define FIFO_CFG0_ENABLE_SHIFT	8
+
+#define FIFO_CFG4_DE		BIT(0)	/* Drop Event */
+#define FIFO_CFG4_DV		BIT(1)	/* RX_DV Event */
+#define FIFO_CFG4_FC		BIT(2)	/* False Carrier */
+#define FIFO_CFG4_CE		BIT(3)	/* Code Error */
+#define FIFO_CFG4_CR		BIT(4)	/* CRC error */
+#define FIFO_CFG4_LM		BIT(5)	/* Length Mismatch */
+#define FIFO_CFG4_LO		BIT(6)	/* Length out of range */
+#define FIFO_CFG4_OK		BIT(7)	/* Packet is OK */
+#define FIFO_CFG4_MC		BIT(8)	/* Multicast Packet */
+#define FIFO_CFG4_BC		BIT(9)	/* Broadcast Packet */
+#define FIFO_CFG4_DR		BIT(10)	/* Dribble */
+#define FIFO_CFG4_LE		BIT(11)	/* Long Event */
+#define FIFO_CFG4_CF		BIT(12)	/* Control Frame */
+#define FIFO_CFG4_PF		BIT(13)	/* Pause Frame */
+#define FIFO_CFG4_UO		BIT(14)	/* Unsupported Opcode */
+#define FIFO_CFG4_VT		BIT(15)	/* VLAN tag detected */
+#define FIFO_CFG4_FT		BIT(16)	/* Frame Truncated */
+#define FIFO_CFG4_UC		BIT(17)	/* Unicast Packet */
+
+#define FIFO_CFG5_DE		BIT(0)	/* Drop Event */
+#define FIFO_CFG5_DV		BIT(1)	/* RX_DV Event */
+#define FIFO_CFG5_FC		BIT(2)	/* False Carrier */
+#define FIFO_CFG5_CE		BIT(3)	/* Code Error */
+#define FIFO_CFG5_LM		BIT(4)	/* Length Mismatch */
+#define FIFO_CFG5_LO		BIT(5)	/* Length Out of Range */
+#define FIFO_CFG5_OK		BIT(6)	/* Packet is OK */
+#define FIFO_CFG5_MC		BIT(7)	/* Multicast Packet */
+#define FIFO_CFG5_BC		BIT(8)	/* Broadcast Packet */
+#define FIFO_CFG5_DR		BIT(9)	/* Dribble */
+#define FIFO_CFG5_CF		BIT(10)	/* Control Frame */
+#define FIFO_CFG5_PF		BIT(11)	/* Pause Frame */
+#define FIFO_CFG5_UO		BIT(12)	/* Unsupported Opcode */
+#define FIFO_CFG5_VT		BIT(13)	/* VLAN tag detected */
+#define FIFO_CFG5_LE		BIT(14)	/* Long Event */
+#define FIFO_CFG5_FT		BIT(15)	/* Frame Truncated */
+#define FIFO_CFG5_16		BIT(16)	/* unknown */
+#define FIFO_CFG5_17		BIT(17)	/* unknown */
+#define FIFO_CFG5_SF		BIT(18)	/* Short Frame */
+#define FIFO_CFG5_BM		BIT(19)	/* Byte Mode */
+
+#define AG71XX_INT_TX_PS	BIT(0)
+#define AG71XX_INT_TX_UR	BIT(1)
+#define AG71XX_INT_TX_BE	BIT(3)
+#define AG71XX_INT_RX_PR	BIT(4)
+#define AG71XX_INT_RX_OF	BIT(6)
+#define AG71XX_INT_RX_BE	BIT(7)
+
+#define MAC_IFCTL_SPEED		BIT(16)
+
+#define MII_CFG_CLK_DIV_4	0
+#define MII_CFG_CLK_DIV_6	2
+#define MII_CFG_CLK_DIV_8	3
+#define MII_CFG_CLK_DIV_10	4
+#define MII_CFG_CLK_DIV_14	5
+#define MII_CFG_CLK_DIV_20	6
+#define MII_CFG_CLK_DIV_28	7
+#define MII_CFG_RESET		BIT(31)
+
+#define MII_CMD_WRITE		0x0
+#define MII_CMD_READ		0x1
+#define MII_ADDR_SHIFT		8
+#define MII_IND_BUSY		BIT(0)
+#define MII_IND_INVALID		BIT(2)
+
+#define TX_CTRL_TXE		BIT(0)	/* Tx Enable */
+
+#define TX_STATUS_PS		BIT(0)	/* Packet Sent */
+#define TX_STATUS_UR		BIT(1)	/* Tx Underrun */
+#define TX_STATUS_BE		BIT(3)	/* Bus Error */
+
+#define RX_CTRL_RXE		BIT(0)	/* Rx Enable */
+
+#define RX_STATUS_PR		BIT(0)	/* Packet Received */
+#define RX_STATUS_OF		BIT(2)	/* Rx Overflow */
+#define RX_STATUS_BE		BIT(3)	/* Bus Error */
+
+#define MII_CTRL_IF_MASK	3
+#define MII_CTRL_SPEED_SHIFT	4
+#define MII_CTRL_SPEED_MASK	3
+#define MII_CTRL_SPEED_10	0
+#define MII_CTRL_SPEED_100	1
+#define MII_CTRL_SPEED_1000	2
+
+static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg)
+{
+	switch (reg) {
+	case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
+	case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_INT_STATUS:
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value)
+{
+	ag71xx_check_reg_offset(ag, reg);
+
+	__raw_writel(value, ag->mac_base + reg);
+	/* flush write */
+	(void) __raw_readl(ag->mac_base + reg);
+}
+
+static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg)
+{
+	ag71xx_check_reg_offset(ag, reg);
+
+	return __raw_readl(ag->mac_base + reg);
+}
+
+static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask)
+{
+	void __iomem *r;
+
+	ag71xx_check_reg_offset(ag, reg);
+
+	r = ag->mac_base + reg;
+	__raw_writel(__raw_readl(r) | mask, r);
+	/* flush write */
+	(void)__raw_readl(r);
+}
+
+static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask)
+{
+	void __iomem *r;
+
+	ag71xx_check_reg_offset(ag, reg);
+
+	r = ag->mac_base + reg;
+	__raw_writel(__raw_readl(r) & ~mask, r);
+	/* flush write */
+	(void) __raw_readl(r);
+}
+
+static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints)
+{
+	ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints);
+}
+
+static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints)
+{
+	ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints);
+}
+
+static inline void ag71xx_mii_ctrl_wr(struct ag71xx *ag, u32 value)
+{
+	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+	if (pdata->is_ar724x)
+		return;
+
+	__raw_writel(value, ag->mii_ctrl);
+
+	/* flush write */
+	__raw_readl(ag->mii_ctrl);
+}
+
+static inline u32 ag71xx_mii_ctrl_rr(struct ag71xx *ag)
+{
+	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+	if (pdata->is_ar724x)
+		return 0xffffffff;
+
+	return __raw_readl(ag->mii_ctrl);
+}
+
+static void inline ag71xx_mii_ctrl_set_if(struct ag71xx *ag,
+					  unsigned int mii_if)
+{
+	u32 t;
+
+	t = ag71xx_mii_ctrl_rr(ag);
+	t &= ~(MII_CTRL_IF_MASK);
+	t |= (mii_if & MII_CTRL_IF_MASK);
+	ag71xx_mii_ctrl_wr(ag, t);
+}
+
+static void inline ag71xx_mii_ctrl_set_speed(struct ag71xx *ag,
+					     unsigned int speed)
+{
+	u32 t;
+
+	t = ag71xx_mii_ctrl_rr(ag);
+	t &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT);
+	t |= (speed & MII_CTRL_SPEED_MASK) << MII_CTRL_SPEED_SHIFT;
+	ag71xx_mii_ctrl_wr(ag, t);
+}
+
+#ifdef CONFIG_AG71XX_AR8216_SUPPORT
+void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb);
+int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
+				int pktlen);
+static inline int ag71xx_has_ar8216(struct ag71xx *ag)
+{
+	return ag71xx_get_pdata(ag)->has_ar8216;
+}
+#else
+static inline void ag71xx_add_ar8216_header(struct ag71xx *ag,
+					   struct sk_buff *skb)
+{
+}
+
+static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag,
+					      struct sk_buff *skb,
+					      int pktlen)
+{
+	return 0;
+}
+static inline int ag71xx_has_ar8216(struct ag71xx *ag)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_AG71XX_DEBUG_FS
+int ag71xx_debugfs_root_init(void);
+void ag71xx_debugfs_root_exit(void);
+int ag71xx_debugfs_init(struct ag71xx *ag);
+void ag71xx_debugfs_exit(struct ag71xx *ag);
+void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status);
+void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx);
+#else
+static inline int ag71xx_debugfs_root_init(void) { return 0; }
+static inline void ag71xx_debugfs_root_exit(void) {}
+static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; }
+static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {}
+static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag,
+						   u32 status) {}
+static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag,
+						    int rx, int tx) {}
+#endif /* CONFIG_AG71XX_DEBUG_FS */
+
+#endif /* _AG71XX_H */
diff -Nur linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_main.c linux-2.6.35.7/drivers/net/ag71xx/ag71xx_main.c
--- linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_main.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/ag71xx/ag71xx_main.c	2010-10-14 20:28:00.638101269 +0200
@@ -0,0 +1,1184 @@
+/*
+ *  Atheros AR71xx built-in ethernet mac driver
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Based on Atheros' AG7100 driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+#define AG71XX_DEFAULT_MSG_ENABLE	\
+	( NETIF_MSG_DRV 		\
+	| NETIF_MSG_PROBE		\
+	| NETIF_MSG_LINK		\
+	| NETIF_MSG_TIMER		\
+	| NETIF_MSG_IFDOWN		\
+	| NETIF_MSG_IFUP		\
+	| NETIF_MSG_RX_ERR		\
+	| NETIF_MSG_TX_ERR )
+
+static int ag71xx_msg_level = -1;
+
+module_param_named(msg_level, ag71xx_msg_level, int, 0);
+MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
+
+static void ag71xx_dump_dma_regs(struct ag71xx *ag)
+{
+	DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n",
+		ag->dev->name,
+		ag71xx_rr(ag, AG71XX_REG_TX_CTRL),
+		ag71xx_rr(ag, AG71XX_REG_TX_DESC),
+		ag71xx_rr(ag, AG71XX_REG_TX_STATUS));
+
+	DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n",
+		ag->dev->name,
+		ag71xx_rr(ag, AG71XX_REG_RX_CTRL),
+		ag71xx_rr(ag, AG71XX_REG_RX_DESC),
+		ag71xx_rr(ag, AG71XX_REG_RX_STATUS));
+}
+
+static void ag71xx_dump_regs(struct ag71xx *ag)
+{
+	DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n",
+		ag->dev->name,
+		ag71xx_rr(ag, AG71XX_REG_MAC_CFG1),
+		ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
+		ag71xx_rr(ag, AG71XX_REG_MAC_IPG),
+		ag71xx_rr(ag, AG71XX_REG_MAC_HDX),
+		ag71xx_rr(ag, AG71XX_REG_MAC_MFL));
+	DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n",
+		ag->dev->name,
+		ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
+		ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1),
+		ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2));
+	DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n",
+		ag->dev->name,
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
+	DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n",
+		ag->dev->name,
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
+}
+
+static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr)
+{
+	DBG("%s: %s intr=%08x %s%s%s%s%s%s\n",
+		ag->dev->name, label, intr,
+		(intr & AG71XX_INT_TX_PS) ? "TXPS " : "",
+		(intr & AG71XX_INT_TX_UR) ? "TXUR " : "",
+		(intr & AG71XX_INT_TX_BE) ? "TXBE " : "",
+		(intr & AG71XX_INT_RX_PR) ? "RXPR " : "",
+		(intr & AG71XX_INT_RX_OF) ? "RXOF " : "",
+		(intr & AG71XX_INT_RX_BE) ? "RXBE " : "");
+}
+
+static void ag71xx_ring_free(struct ag71xx_ring *ring)
+{
+	kfree(ring->buf);
+
+	if (ring->descs_cpu)
+		dma_free_coherent(NULL, ring->size * ring->desc_size,
+				  ring->descs_cpu, ring->descs_dma);
+}
+
+static int ag71xx_ring_alloc(struct ag71xx_ring *ring, unsigned int size)
+{
+	int err;
+	int i;
+
+	ring->desc_size = sizeof(struct ag71xx_desc);
+	if (ring->desc_size % cache_line_size()) {
+		DBG("ag71xx: ring %p, desc size %u rounded to %u\n",
+			ring, ring->desc_size,
+			roundup(ring->desc_size, cache_line_size()));
+		ring->desc_size = roundup(ring->desc_size, cache_line_size());
+	}
+
+	ring->descs_cpu = dma_alloc_coherent(NULL, size * ring->desc_size,
+					     &ring->descs_dma, GFP_ATOMIC);
+	if (!ring->descs_cpu) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	ring->size = size;
+
+	ring->buf = kzalloc(size * sizeof(*ring->buf), GFP_KERNEL);
+	if (!ring->buf) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	for (i = 0; i < size; i++) {
+		ring->buf[i].desc = (struct ag71xx_desc *)&ring->descs_cpu[i * ring->desc_size];
+		DBG("ag71xx: ring %p, desc %d at %p\n",
+			ring, i, ring->buf[i].desc);
+	}
+
+	return 0;
+
+ err:
+	return err;
+}
+
+static void ag71xx_ring_tx_clean(struct ag71xx *ag)
+{
+	struct ag71xx_ring *ring = &ag->tx_ring;
+	struct net_device *dev = ag->dev;
+
+	while (ring->curr != ring->dirty) {
+		u32 i = ring->dirty % AG71XX_TX_RING_SIZE;
+
+		if (!ag71xx_desc_empty(ring->buf[i].desc)) {
+			ring->buf[i].desc->ctrl = 0;
+			dev->stats.tx_errors++;
+		}
+
+		if (ring->buf[i].skb)
+			dev_kfree_skb_any(ring->buf[i].skb);
+
+		ring->buf[i].skb = NULL;
+
+		ring->dirty++;
+	}
+
+	/* flush descriptors */
+	wmb();
+
+}
+
+static void ag71xx_ring_tx_init(struct ag71xx *ag)
+{
+	struct ag71xx_ring *ring = &ag->tx_ring;
+	int i;
+
+	for (i = 0; i < AG71XX_TX_RING_SIZE; i++) {
+		ring->buf[i].desc->next = (u32) (ring->descs_dma +
+			ring->desc_size * ((i + 1) % AG71XX_TX_RING_SIZE));
+
+		ring->buf[i].desc->ctrl = DESC_EMPTY;
+		ring->buf[i].skb = NULL;
+	}
+
+	/* flush descriptors */
+	wmb();
+
+	ring->curr = 0;
+	ring->dirty = 0;
+}
+
+static void ag71xx_ring_rx_clean(struct ag71xx *ag)
+{
+	struct ag71xx_ring *ring = &ag->rx_ring;
+	int i;
+
+	if (!ring->buf)
+		return;
+
+	for (i = 0; i < AG71XX_RX_RING_SIZE; i++)
+		if (ring->buf[i].skb) {
+			dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr,
+					 AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE);
+			kfree_skb(ring->buf[i].skb);
+		}
+}
+
+static int ag71xx_rx_reserve(struct ag71xx *ag)
+{
+	int reserve = 0;
+
+	if (ag71xx_get_pdata(ag)->is_ar724x) {
+		if (!ag71xx_has_ar8216(ag))
+			reserve = 2;
+
+		if (ag->phy_dev)
+			reserve += 4 - (ag->phy_dev->pkt_align % 4);
+
+		reserve %= 4;
+	}
+
+	return reserve + AG71XX_RX_PKT_RESERVE;
+}
+
+
+static int ag71xx_ring_rx_init(struct ag71xx *ag)
+{
+	struct ag71xx_ring *ring = &ag->rx_ring;
+	unsigned int reserve = ag71xx_rx_reserve(ag);
+	unsigned int i;
+	int ret;
+
+	ret = 0;
+	for (i = 0; i < AG71XX_RX_RING_SIZE; i++) {
+		ring->buf[i].desc->next = (u32) (ring->descs_dma +
+			ring->desc_size * ((i + 1) % AG71XX_RX_RING_SIZE));
+
+		DBG("ag71xx: RX desc at %p, next is %08x\n",
+			ring->buf[i].desc,
+			ring->buf[i].desc->next);
+	}
+
+	for (i = 0; i < AG71XX_RX_RING_SIZE; i++) {
+		struct sk_buff *skb;
+		dma_addr_t dma_addr;
+
+		skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve);
+		if (!skb) {
+			ret = -ENOMEM;
+			break;
+		}
+
+		skb->dev = ag->dev;
+		skb_reserve(skb, reserve);
+
+		dma_addr = dma_map_single(&ag->dev->dev, skb->data,
+					  AG71XX_RX_PKT_SIZE,
+					  DMA_FROM_DEVICE);
+		ring->buf[i].skb = skb;
+		ring->buf[i].dma_addr = dma_addr;
+		ring->buf[i].desc->data = (u32) dma_addr;
+		ring->buf[i].desc->ctrl = DESC_EMPTY;
+	}
+
+	/* flush descriptors */
+	wmb();
+
+	ring->curr = 0;
+	ring->dirty = 0;
+
+	return ret;
+}
+
+static int ag71xx_ring_rx_refill(struct ag71xx *ag)
+{
+	struct ag71xx_ring *ring = &ag->rx_ring;
+	unsigned int reserve = ag71xx_rx_reserve(ag);
+	unsigned int count;
+
+	count = 0;
+	for (; ring->curr - ring->dirty > 0; ring->dirty++) {
+		unsigned int i;
+
+		i = ring->dirty % AG71XX_RX_RING_SIZE;
+
+		if (ring->buf[i].skb == NULL) {
+			dma_addr_t dma_addr;
+			struct sk_buff *skb;
+
+			skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve);
+			if (skb == NULL)
+				break;
+
+			skb_reserve(skb, reserve);
+			skb->dev = ag->dev;
+
+			dma_addr = dma_map_single(&ag->dev->dev, skb->data,
+						  AG71XX_RX_PKT_SIZE,
+						  DMA_FROM_DEVICE);
+
+			ring->buf[i].skb = skb;
+			ring->buf[i].dma_addr = dma_addr;
+			ring->buf[i].desc->data = (u32) dma_addr;
+		}
+
+		ring->buf[i].desc->ctrl = DESC_EMPTY;
+		count++;
+	}
+
+	/* flush descriptors */
+	wmb();
+
+	DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count);
+
+	return count;
+}
+
+static int ag71xx_rings_init(struct ag71xx *ag)
+{
+	int ret;
+
+	ret = ag71xx_ring_alloc(&ag->tx_ring, AG71XX_TX_RING_SIZE);
+	if (ret)
+		return ret;
+
+	ag71xx_ring_tx_init(ag);
+
+	ret = ag71xx_ring_alloc(&ag->rx_ring, AG71XX_RX_RING_SIZE);
+	if (ret)
+		return ret;
+
+	ret = ag71xx_ring_rx_init(ag);
+	return ret;
+}
+
+static void ag71xx_rings_cleanup(struct ag71xx *ag)
+{
+	ag71xx_ring_rx_clean(ag);
+	ag71xx_ring_free(&ag->rx_ring);
+
+	ag71xx_ring_tx_clean(ag);
+	ag71xx_ring_free(&ag->tx_ring);
+}
+
+static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
+{
+	switch (ag->speed) {
+	case SPEED_1000:
+		return "1000";
+	case SPEED_100:
+		return "100";
+	case SPEED_10:
+		return "10";
+	}
+
+	return "?";
+}
+
+void ag71xx_link_adjust(struct ag71xx *ag)
+{
+	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+	u32 cfg2;
+	u32 ifctl;
+	u32 fifo5;
+	u32 mii_speed;
+
+	if (!ag->link) {
+		netif_carrier_off(ag->dev);
+		if (netif_msg_link(ag))
+			printk(KERN_INFO "%s: link down\n", ag->dev->name);
+		return;
+	}
+
+	cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
+	cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
+	cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
+
+	ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
+	ifctl &= ~(MAC_IFCTL_SPEED);
+
+	fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
+	fifo5 &= ~FIFO_CFG5_BM;
+
+	switch (ag->speed) {
+	case SPEED_1000:
+		mii_speed =  MII_CTRL_SPEED_1000;
+		cfg2 |= MAC_CFG2_IF_1000;
+		fifo5 |= FIFO_CFG5_BM;
+		break;
+	case SPEED_100:
+		mii_speed = MII_CTRL_SPEED_100;
+		cfg2 |= MAC_CFG2_IF_10_100;
+		ifctl |= MAC_IFCTL_SPEED;
+		break;
+	case SPEED_10:
+		mii_speed = MII_CTRL_SPEED_10;
+		cfg2 |= MAC_CFG2_IF_10_100;
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	if (pdata->is_ar91xx)
+		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff);
+	else if (pdata->is_ar724x)
+		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, pdata->fifo_cfg3);
+	else
+		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff);
+
+	if (pdata->set_pll)
+		pdata->set_pll(ag->speed);
+
+	ag71xx_mii_ctrl_set_speed(ag, mii_speed);
+
+	ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
+	ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
+	ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
+
+	netif_carrier_on(ag->dev);
+	if (netif_msg_link(ag))
+		printk(KERN_INFO "%s: link up (%sMbps/%s duplex)\n",
+			ag->dev->name,
+			ag71xx_speed_str(ag),
+			(DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
+
+	DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n",
+		ag->dev->name,
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
+
+	DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n",
+		ag->dev->name,
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
+		ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
+
+	DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x, mii_ctrl=%#x\n",
+		ag->dev->name,
+		ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
+		ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
+		ag71xx_mii_ctrl_rr(ag));
+}
+
+static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
+{
+	u32 t;
+
+	t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16)
+	  | (((u32) mac[3]) << 8) | ((u32) mac[2]);
+
+	ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t);
+
+	t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16);
+	ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t);
+}
+
+static void ag71xx_dma_reset(struct ag71xx *ag)
+{
+	u32 val;
+	int i;
+
+	ag71xx_dump_dma_regs(ag);
+
+	/* stop RX and TX */
+	ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
+	ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
+
+	/* clear descriptor addresses */
+	ag71xx_wr(ag, AG71XX_REG_TX_DESC, 0);
+	ag71xx_wr(ag, AG71XX_REG_RX_DESC, 0);
+
+	/* clear pending RX/TX interrupts */
+	for (i = 0; i < 256; i++) {
+		ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
+		ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
+	}
+
+	/* clear pending errors */
+	ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF);
+	ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR);
+
+	val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
+	if (val)
+		printk(KERN_ALERT "%s: unable to clear DMA Rx status: %08x\n",
+			ag->dev->name, val);
+
+	val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
+
+	/* mask out reserved bits */
+	val &= ~0xff000000;
+
+	if (val)
+		printk(KERN_ALERT "%s: unable to clear DMA Tx status: %08x\n",
+			ag->dev->name, val);
+
+	ag71xx_dump_dma_regs(ag);
+}
+
+#define MAC_CFG1_INIT	(MAC_CFG1_RXE | MAC_CFG1_TXE | \
+			 MAC_CFG1_SRX | MAC_CFG1_STX)
+
+#define FIFO_CFG0_INIT	(FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT)
+
+#define FIFO_CFG4_INIT	(FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \
+			 FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \
+			 FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \
+			 FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \
+			 FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \
+			 FIFO_CFG4_VT)
+
+#define FIFO_CFG5_INIT	(FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \
+			 FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \
+			 FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \
+			 FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \
+			 FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \
+			 FIFO_CFG5_17 | FIFO_CFG5_SF)
+
+static void ag71xx_hw_init(struct ag71xx *ag)
+{
+	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+	ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR);
+	udelay(20);
+
+	ar71xx_device_stop(pdata->reset_bit);
+	mdelay(100);
+	ar71xx_device_start(pdata->reset_bit);
+	mdelay(100);
+
+	/* setup MAC configuration registers */
+	if (pdata->is_ar724x)
+		ag71xx_wr(ag, AG71XX_REG_MAC_CFG1,
+			  MAC_CFG1_INIT | MAC_CFG1_TFC | MAC_CFG1_RFC);
+	else
+		ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT);
+
+	ag71xx_sb(ag, AG71XX_REG_MAC_CFG2,
+		  MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);
+
+	/* setup max frame length */
+	ag71xx_wr(ag, AG71XX_REG_MAC_MFL, AG71XX_TX_MTU_LEN);
+
+	/* setup MII interface type */
+	ag71xx_mii_ctrl_set_if(ag, pdata->mii_if);
+
+	/* setup FIFO configuration registers */
+	ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT);
+	if (pdata->is_ar724x) {
+		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, pdata->fifo_cfg1);
+		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, pdata->fifo_cfg2);
+	} else {
+		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000);
+		ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff);
+	}
+	ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT);
+	ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT);
+
+	ag71xx_dma_reset(ag);
+}
+
+static void ag71xx_hw_start(struct ag71xx *ag)
+{
+	/* start RX engine */
+	ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
+
+	/* enable interrupts */
+	ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT);
+}
+
+static void ag71xx_hw_stop(struct ag71xx *ag)
+{
+	/* disable all interrupts */
+	ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0);
+
+	ag71xx_dma_reset(ag);
+}
+
+static int ag71xx_open(struct net_device *dev)
+{
+	struct ag71xx *ag = netdev_priv(dev);
+	int ret;
+
+	ret = ag71xx_rings_init(ag);
+	if (ret)
+		goto err;
+
+	napi_enable(&ag->napi);
+
+	netif_carrier_off(dev);
+	ag71xx_phy_start(ag);
+
+	ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
+	ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma);
+
+	ag71xx_hw_set_macaddr(ag, dev->dev_addr);
+
+	ag71xx_hw_start(ag);
+
+	netif_start_queue(dev);
+
+	return 0;
+
+ err:
+	ag71xx_rings_cleanup(ag);
+	return ret;
+}
+
+static int ag71xx_stop(struct net_device *dev)
+{
+	struct ag71xx *ag = netdev_priv(dev);
+	unsigned long flags;
+
+	netif_carrier_off(dev);
+	ag71xx_phy_stop(ag);
+
+	spin_lock_irqsave(&ag->lock, flags);
+
+	netif_stop_queue(dev);
+
+	ag71xx_hw_stop(ag);
+
+	napi_disable(&ag->napi);
+	del_timer_sync(&ag->oom_timer);
+
+	spin_unlock_irqrestore(&ag->lock, flags);
+
+	ag71xx_rings_cleanup(ag);
+
+	return 0;
+}
+
+static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb,
+					  struct net_device *dev)
+{
+	struct ag71xx *ag = netdev_priv(dev);
+	struct ag71xx_ring *ring = &ag->tx_ring;
+	struct ag71xx_desc *desc;
+	dma_addr_t dma_addr;
+	int i;
+
+	i = ring->curr % AG71XX_TX_RING_SIZE;
+	desc = ring->buf[i].desc;
+
+	if (!ag71xx_desc_empty(desc))
+		goto err_drop;
+
+	if (ag71xx_has_ar8216(ag))
+		ag71xx_add_ar8216_header(ag, skb);
+
+	if (skb->len <= 0) {
+		DBG("%s: packet len is too small\n", ag->dev->name);
+		goto err_drop;
+	}
+
+	dma_addr = dma_map_single(&dev->dev, skb->data, skb->len,
+				  DMA_TO_DEVICE);
+
+	ring->buf[i].skb = skb;
+
+	/* setup descriptor fields */
+	desc->data = (u32) dma_addr;
+	desc->ctrl = (skb->len & DESC_PKTLEN_M);
+
+	/* flush descriptor */
+	wmb();
+
+	ring->curr++;
+	if (ring->curr == (ring->dirty + AG71XX_TX_THRES_STOP)) {
+		DBG("%s: tx queue full\n", ag->dev->name);
+		netif_stop_queue(dev);
+	}
+
+	DBG("%s: packet injected into TX queue\n", ag->dev->name);
+
+	/* enable TX engine */
+	ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
+
+	return NETDEV_TX_OK;
+
+ err_drop:
+	dev->stats.tx_dropped++;
+
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
+	struct ag71xx *ag = netdev_priv(dev);
+	int ret;
+
+	switch (cmd) {
+	case SIOCETHTOOL:
+		if (ag->phy_dev == NULL)
+			break;
+
+		spin_lock_irq(&ag->lock);
+		ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data);
+		spin_unlock_irq(&ag->lock);
+		return ret;
+
+	case SIOCSIFHWADDR:
+		if (copy_from_user
+			(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
+			return -EFAULT;
+		return 0;
+
+	case SIOCGIFHWADDR:
+		if (copy_to_user
+			(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
+			return -EFAULT;
+		return 0;
+
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		if (ag->phy_dev == NULL)
+			break;
+
+		return phy_mii_ioctl(ag->phy_dev, data, cmd);
+
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static void ag71xx_oom_timer_handler(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *) data;
+	struct ag71xx *ag = netdev_priv(dev);
+
+	napi_schedule(&ag->napi);
+}
+
+static void ag71xx_tx_timeout(struct net_device *dev)
+{
+	struct ag71xx *ag = netdev_priv(dev);
+
+	if (netif_msg_tx_err(ag))
+		printk(KERN_DEBUG "%s: tx timeout\n", ag->dev->name);
+
+	schedule_work(&ag->restart_work);
+}
+
+static void ag71xx_restart_work_func(struct work_struct *work)
+{
+	struct ag71xx *ag = container_of(work, struct ag71xx, restart_work);
+
+	ag71xx_stop(ag->dev);
+	ag71xx_open(ag->dev);
+}
+
+static int ag71xx_tx_packets(struct ag71xx *ag)
+{
+	struct ag71xx_ring *ring = &ag->tx_ring;
+	int sent;
+
+	DBG("%s: processing TX ring\n", ag->dev->name);
+
+	sent = 0;
+	while (ring->dirty != ring->curr) {
+		unsigned int i = ring->dirty % AG71XX_TX_RING_SIZE;
+		struct ag71xx_desc *desc = ring->buf[i].desc;
+		struct sk_buff *skb = ring->buf[i].skb;
+
+		if (!ag71xx_desc_empty(desc))
+			break;
+
+		ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
+
+		ag->dev->stats.tx_bytes += skb->len;
+		ag->dev->stats.tx_packets++;
+
+		dev_kfree_skb_any(skb);
+		ring->buf[i].skb = NULL;
+
+		ring->dirty++;
+		sent++;
+	}
+
+	DBG("%s: %d packets sent out\n", ag->dev->name, sent);
+
+	if ((ring->curr - ring->dirty) < AG71XX_TX_THRES_WAKEUP)
+		netif_wake_queue(ag->dev);
+
+	return sent;
+}
+
+static int ag71xx_rx_packets(struct ag71xx *ag, int limit)
+{
+	struct net_device *dev = ag->dev;
+	struct ag71xx_ring *ring = &ag->rx_ring;
+	int done = 0;
+
+	DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n",
+			dev->name, limit, ring->curr, ring->dirty);
+
+	while (done < limit) {
+		unsigned int i = ring->curr % AG71XX_RX_RING_SIZE;
+		struct ag71xx_desc *desc = ring->buf[i].desc;
+		struct sk_buff *skb;
+		int pktlen;
+		int err = 0;
+
+		if (ag71xx_desc_empty(desc))
+			break;
+
+		if ((ring->dirty + AG71XX_RX_RING_SIZE) == ring->curr) {
+			ag71xx_assert(0);
+			break;
+		}
+
+		ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
+
+		skb = ring->buf[i].skb;
+		pktlen = ag71xx_desc_pktlen(desc);
+		pktlen -= ETH_FCS_LEN;
+
+		dma_unmap_single(&dev->dev, ring->buf[i].dma_addr,
+				 AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE);
+
+		dev->last_rx = jiffies;
+		dev->stats.rx_packets++;
+		dev->stats.rx_bytes += pktlen;
+
+		skb_put(skb, pktlen);
+		if (ag71xx_has_ar8216(ag))
+			err = ag71xx_remove_ar8216_header(ag, skb, pktlen);
+
+		if (err) {
+			dev->stats.rx_dropped++;
+			kfree_skb(skb);
+		} else {
+			skb->dev = dev;
+			skb->ip_summed = CHECKSUM_NONE;
+			if (ag->phy_dev) {
+				ag->phy_dev->netif_receive_skb(skb);
+			} else {
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_receive_skb(skb);
+			}
+		}
+
+		ring->buf[i].skb = NULL;
+		done++;
+
+		ring->curr++;
+	}
+
+	ag71xx_ring_rx_refill(ag);
+
+	DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n",
+		dev->name, ring->curr, ring->dirty, done);
+
+	return done;
+}
+
+static int ag71xx_poll(struct napi_struct *napi, int limit)
+{
+	struct ag71xx *ag = container_of(napi, struct ag71xx, napi);
+	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+	struct net_device *dev = ag->dev;
+	struct ag71xx_ring *rx_ring;
+	unsigned long flags;
+	u32 status;
+	int tx_done;
+	int rx_done;
+
+	pdata->ddr_flush();
+	tx_done = ag71xx_tx_packets(ag);
+
+	DBG("%s: processing RX ring\n", dev->name);
+	rx_done = ag71xx_rx_packets(ag, limit);
+
+	ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done);
+
+	rx_ring = &ag->rx_ring;
+	if (rx_ring->buf[rx_ring->dirty % AG71XX_RX_RING_SIZE].skb == NULL)
+		goto oom;
+
+	status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
+	if (unlikely(status & RX_STATUS_OF)) {
+		ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF);
+		dev->stats.rx_fifo_errors++;
+
+		/* restart RX */
+		ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
+	}
+
+	if (rx_done < limit) {
+		if (status & RX_STATUS_PR)
+			goto more;
+
+		status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
+		if (status & TX_STATUS_PS)
+			goto more;
+
+		DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n",
+			dev->name, rx_done, tx_done, limit);
+
+		napi_complete(napi);
+
+		/* enable interrupts */
+		spin_lock_irqsave(&ag->lock, flags);
+		ag71xx_int_enable(ag, AG71XX_INT_POLL);
+		spin_unlock_irqrestore(&ag->lock, flags);
+		return rx_done;
+	}
+
+ more:
+	DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n",
+			dev->name, rx_done, tx_done, limit);
+	return rx_done;
+
+ oom:
+	if (netif_msg_rx_err(ag))
+		printk(KERN_DEBUG "%s: out of memory\n", dev->name);
+
+	mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL);
+	napi_complete(napi);
+	return 0;
+}
+
+static irqreturn_t ag71xx_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct ag71xx *ag = netdev_priv(dev);
+	u32 status;
+
+	status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS);
+	ag71xx_dump_intr(ag, "raw", status);
+
+	if (unlikely(!status))
+		return IRQ_NONE;
+
+	if (unlikely(status & AG71XX_INT_ERR)) {
+		if (status & AG71XX_INT_TX_BE) {
+			ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE);
+			dev_err(&dev->dev, "TX BUS error\n");
+		}
+		if (status & AG71XX_INT_RX_BE) {
+			ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE);
+			dev_err(&dev->dev, "RX BUS error\n");
+		}
+	}
+
+	if (likely(status & AG71XX_INT_POLL)) {
+		ag71xx_int_disable(ag, AG71XX_INT_POLL);
+		DBG("%s: enable polling mode\n", dev->name);
+		napi_schedule(&ag->napi);
+	}
+
+	ag71xx_debugfs_update_int_stats(ag, status);
+
+	return IRQ_HANDLED;
+}
+
+static void ag71xx_set_multicast_list(struct net_device *dev)
+{
+	/* TODO */
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void ag71xx_netpoll(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	ag71xx_interrupt(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+static const struct net_device_ops ag71xx_netdev_ops = {
+	.ndo_open		= ag71xx_open,
+	.ndo_stop		= ag71xx_stop,
+	.ndo_start_xmit		= ag71xx_hard_start_xmit,
+	.ndo_set_multicast_list	= ag71xx_set_multicast_list,
+	.ndo_do_ioctl		= ag71xx_do_ioctl,
+	.ndo_tx_timeout		= ag71xx_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ag71xx_netpoll,
+#endif
+};
+
+static int __init ag71xx_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct resource *res;
+	struct ag71xx *ag;
+	struct ag71xx_platform_data *pdata;
+	int err;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data specified\n");
+		err = -ENXIO;
+		goto err_out;
+	}
+
+	if (pdata->mii_bus_dev == NULL) {
+		dev_err(&pdev->dev, "no MII bus device specified\n");
+		err = -EINVAL;
+		goto err_out;
+	}
+
+	dev = alloc_etherdev(sizeof(*ag));
+	if (!dev) {
+		dev_err(&pdev->dev, "alloc_etherdev failed\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	ag = netdev_priv(dev);
+	ag->pdev = pdev;
+	ag->dev = dev;
+	ag->msg_enable = netif_msg_init(ag71xx_msg_level,
+					AG71XX_DEFAULT_MSG_ENABLE);
+	spin_lock_init(&ag->lock);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base");
+	if (!res) {
+		dev_err(&pdev->dev, "no mac_base resource found\n");
+		err = -ENXIO;
+		goto err_out;
+	}
+
+	ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1);
+	if (!ag->mac_base) {
+		dev_err(&pdev->dev, "unable to ioremap mac_base\n");
+		err = -ENOMEM;
+		goto err_free_dev;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mii_ctrl");
+	if (!res) {
+		dev_err(&pdev->dev, "no mii_ctrl resource found\n");
+		err = -ENXIO;
+		goto err_unmap_base;
+	}
+
+	ag->mii_ctrl = ioremap_nocache(res->start, res->end - res->start + 1);
+	if (!ag->mii_ctrl) {
+		dev_err(&pdev->dev, "unable to ioremap mii_ctrl\n");
+		err = -ENOMEM;
+		goto err_unmap_base;
+	}
+
+	dev->irq = platform_get_irq(pdev, 0);
+	err = request_irq(dev->irq, ag71xx_interrupt,
+			  IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+			  dev->name, dev);
+	if (err) {
+		dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq);
+		goto err_unmap_mii_ctrl;
+	}
+
+	dev->base_addr = (unsigned long)ag->mac_base;
+	dev->netdev_ops = &ag71xx_netdev_ops;
+	dev->ethtool_ops = &ag71xx_ethtool_ops;
+
+	INIT_WORK(&ag->restart_work, ag71xx_restart_work_func);
+
+	init_timer(&ag->oom_timer);
+	ag->oom_timer.data = (unsigned long) dev;
+	ag->oom_timer.function = ag71xx_oom_timer_handler;
+
+	memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN);
+
+	netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT);
+
+	err = register_netdev(dev);
+	if (err) {
+		dev_err(&pdev->dev, "unable to register net device\n");
+		goto err_free_irq;
+	}
+
+	printk(KERN_INFO "%s: Atheros AG71xx at 0x%08lx, irq %d\n",
+	       dev->name, dev->base_addr, dev->irq);
+
+	ag71xx_dump_regs(ag);
+
+	ag71xx_hw_init(ag);
+
+	ag71xx_dump_regs(ag);
+
+	err = ag71xx_phy_connect(ag);
+	if (err)
+		goto err_unregister_netdev;
+
+	err = ag71xx_debugfs_init(ag);
+	if (err)
+		goto err_phy_disconnect;
+
+	platform_set_drvdata(pdev, dev);
+
+	return 0;
+
+ err_phy_disconnect:
+	ag71xx_phy_disconnect(ag);
+ err_unregister_netdev:
+	unregister_netdev(dev);
+ err_free_irq:
+	free_irq(dev->irq, dev);
+ err_unmap_mii_ctrl:
+	iounmap(ag->mii_ctrl);
+ err_unmap_base:
+	iounmap(ag->mac_base);
+ err_free_dev:
+	kfree(dev);
+ err_out:
+	platform_set_drvdata(pdev, NULL);
+	return err;
+}
+
+static int __exit ag71xx_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+
+	if (dev) {
+		struct ag71xx *ag = netdev_priv(dev);
+
+		ag71xx_debugfs_exit(ag);
+		ag71xx_phy_disconnect(ag);
+		unregister_netdev(dev);
+		free_irq(dev->irq, dev);
+		iounmap(ag->mii_ctrl);
+		iounmap(ag->mac_base);
+		kfree(dev);
+		platform_set_drvdata(pdev, NULL);
+	}
+
+	return 0;
+}
+
+static struct platform_driver ag71xx_driver = {
+	.probe		= ag71xx_probe,
+	.remove		= __exit_p(ag71xx_remove),
+	.driver = {
+		.name	= AG71XX_DRV_NAME,
+	}
+};
+
+static int __init ag71xx_module_init(void)
+{
+	int ret;
+
+	ret = ag71xx_debugfs_root_init();
+	if (ret)
+		goto err_out;
+
+	ret = ag71xx_mdio_driver_init();
+	if (ret)
+		goto err_debugfs_exit;
+
+	ret = platform_driver_register(&ag71xx_driver);
+	if (ret)
+		goto err_mdio_exit;
+
+	return 0;
+
+ err_mdio_exit:
+	ag71xx_mdio_driver_exit();
+ err_debugfs_exit:
+	ag71xx_debugfs_root_exit();
+ err_out:
+	return ret;
+}
+
+static void __exit ag71xx_module_exit(void)
+{
+	platform_driver_unregister(&ag71xx_driver);
+	ag71xx_mdio_driver_exit();
+	ag71xx_debugfs_root_exit();
+}
+
+module_init(ag71xx_module_init);
+module_exit(ag71xx_module_exit);
+
+MODULE_VERSION(AG71XX_DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" AG71XX_DRV_NAME);
diff -Nur linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_mdio.c linux-2.6.35.7/drivers/net/ag71xx/ag71xx_mdio.c
--- linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_mdio.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/ag71xx/ag71xx_mdio.c	2010-10-14 20:28:00.678101104 +0200
@@ -0,0 +1,243 @@
+/*
+ *  Atheros AR71xx built-in ethernet mac driver
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Based on Atheros' AG7100 driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+#define AG71XX_MDIO_RETRY	1000
+#define AG71XX_MDIO_DELAY	5
+
+static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg,
+				  u32 value)
+{
+	void __iomem *r;
+
+	r = am->mdio_base + reg;
+	__raw_writel(value, r);
+
+	/* flush write */
+	(void) __raw_readl(r);
+}
+
+static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg)
+{
+	return __raw_readl(am->mdio_base + reg);
+}
+
+static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am)
+{
+	DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n",
+		am->mii_bus->name,
+		ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG),
+		ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD),
+		ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR));
+	DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n",
+		am->mii_bus->name,
+		ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL),
+		ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS),
+		ag71xx_mdio_rr(am, AG71XX_REG_MII_IND));
+}
+
+static int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg)
+{
+	int ret;
+	int i;
+
+	ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
+	ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
+			((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
+	ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ);
+
+	i = AG71XX_MDIO_RETRY;
+	while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
+		if (i-- == 0) {
+			printk(KERN_ERR "%s: mii_read timed out\n",
+				am->mii_bus->name);
+			ret = 0xffff;
+			goto out;
+		}
+		udelay(AG71XX_MDIO_DELAY);
+	}
+
+	ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff;
+	ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
+
+	DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret);
+
+ out:
+	return ret;
+}
+
+static void ag71xx_mdio_mii_write(struct ag71xx_mdio *am,
+				  int addr, int reg, u16 val)
+{
+	int i;
+
+	DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val);
+
+	ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
+			((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
+	ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val);
+
+	i = AG71XX_MDIO_RETRY;
+	while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
+		if (i-- == 0) {
+			printk(KERN_ERR "%s: mii_write timed out\n",
+				am->mii_bus->name);
+			break;
+		}
+		udelay(AG71XX_MDIO_DELAY);
+	}
+}
+
+static int ag71xx_mdio_reset(struct mii_bus *bus)
+{
+	struct ag71xx_mdio *am = bus->priv;
+	u32 t;
+
+	if (am->pdata->is_ar7240)
+		t = MII_CFG_CLK_DIV_6;
+	else
+		t = MII_CFG_CLK_DIV_28;
+
+	ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET);
+	udelay(100);
+
+	ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t);
+	udelay(100);
+
+	return 0;
+}
+
+static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg)
+{
+	struct ag71xx_mdio *am = bus->priv;
+
+	return ag71xx_mdio_mii_read(am, addr, reg);
+}
+
+static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+	struct ag71xx_mdio *am = bus->priv;
+
+	ag71xx_mdio_mii_write(am, addr, reg, val);
+	return 0;
+}
+
+static int __init ag71xx_mdio_probe(struct platform_device *pdev)
+{
+	struct ag71xx_mdio_platform_data *pdata;
+	struct ag71xx_mdio *am;
+	struct resource *res;
+	int i;
+	int err;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data specified\n");
+		return -EINVAL;
+	}
+
+	am = kzalloc(sizeof(*am), GFP_KERNEL);
+	if (!am) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	am->pdata = pdata;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no iomem resource found\n");
+		err = -ENXIO;
+		goto err_out;
+	}
+
+	am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1);
+	if (!am->mdio_base) {
+		dev_err(&pdev->dev, "unable to ioremap registers\n");
+		err = -ENOMEM;
+		goto err_free_mdio;
+	}
+
+	am->mii_bus = mdiobus_alloc();
+	if (am->mii_bus == NULL) {
+		err = -ENOMEM;
+		goto err_iounmap;
+	}
+
+	am->mii_bus->name = "ag71xx_mdio";
+	am->mii_bus->read = ag71xx_mdio_read;
+	am->mii_bus->write = ag71xx_mdio_write;
+	am->mii_bus->reset = ag71xx_mdio_reset;
+	am->mii_bus->irq = am->mii_irq;
+	am->mii_bus->priv = am;
+	am->mii_bus->parent = &pdev->dev;
+	snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
+	am->mii_bus->phy_mask = pdata->phy_mask;
+
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		am->mii_irq[i] = PHY_POLL;
+
+	ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0);
+
+	err = mdiobus_register(am->mii_bus);
+	if (err)
+		goto err_free_bus;
+
+	ag71xx_mdio_dump_regs(am);
+
+	platform_set_drvdata(pdev, am);
+	return 0;
+
+ err_free_bus:
+	mdiobus_free(am->mii_bus);
+ err_iounmap:
+	iounmap(am->mdio_base);
+ err_free_mdio:
+	kfree(am);
+ err_out:
+	return err;
+}
+
+static int __exit ag71xx_mdio_remove(struct platform_device *pdev)
+{
+	struct ag71xx_mdio *am = platform_get_drvdata(pdev);
+
+	if (am) {
+		mdiobus_unregister(am->mii_bus);
+		mdiobus_free(am->mii_bus);
+		iounmap(am->mdio_base);
+		kfree(am);
+		platform_set_drvdata(pdev, NULL);
+	}
+
+	return 0;
+}
+
+static struct platform_driver ag71xx_mdio_driver = {
+	.probe		= ag71xx_mdio_probe,
+	.remove		= __exit_p(ag71xx_mdio_remove),
+	.driver = {
+		.name	= "ag71xx-mdio",
+	}
+};
+
+int ag71xx_mdio_driver_init(void)
+{
+	return platform_driver_register(&ag71xx_mdio_driver);
+}
+
+void ag71xx_mdio_driver_exit(void)
+{
+	platform_driver_unregister(&ag71xx_mdio_driver);
+}
diff -Nur linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_phy.c linux-2.6.35.7/drivers/net/ag71xx/ag71xx_phy.c
--- linux-2.6.35.7.orig/drivers/net/ag71xx/ag71xx_phy.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/ag71xx/ag71xx_phy.c	2010-10-14 20:28:00.708092093 +0200
@@ -0,0 +1,213 @@
+/*
+ *  Atheros AR71xx built-in ethernet mac driver
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Based on Atheros' AG7100 driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+static void ag71xx_phy_link_adjust(struct net_device *dev)
+{
+	struct ag71xx *ag = netdev_priv(dev);
+	struct phy_device *phydev = ag->phy_dev;
+	unsigned long flags;
+	int status_change = 0;
+
+	spin_lock_irqsave(&ag->lock, flags);
+
+	if (phydev->link) {
+		if (ag->duplex != phydev->duplex
+		    || ag->speed != phydev->speed) {
+			status_change = 1;
+		}
+	}
+
+	if (phydev->link != ag->link)
+		status_change = 1;
+
+	ag->link = phydev->link;
+	ag->duplex = phydev->duplex;
+	ag->speed = phydev->speed;
+
+	if (status_change)
+		ag71xx_link_adjust(ag);
+
+	spin_unlock_irqrestore(&ag->lock, flags);
+}
+
+void ag71xx_phy_start(struct ag71xx *ag)
+{
+	if (ag->phy_dev) {
+		phy_start(ag->phy_dev);
+	} else {
+		ag->link = 1;
+		ag71xx_link_adjust(ag);
+	}
+}
+
+void ag71xx_phy_stop(struct ag71xx *ag)
+{
+	if (ag->phy_dev) {
+		phy_stop(ag->phy_dev);
+	} else {
+		ag->link = 0;
+		ag71xx_link_adjust(ag);
+	}
+}
+
+static int ag71xx_phy_connect_fixed(struct ag71xx *ag)
+{
+	struct net_device *dev = ag->dev;
+	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+	int ret = 0;
+
+	/* use fixed settings */
+	switch (pdata->speed) {
+	case SPEED_10:
+	case SPEED_100:
+	case SPEED_1000:
+		break;
+	default:
+		printk(KERN_ERR "%s: invalid speed specified\n", dev->name);
+		ret = -EINVAL;
+		break;
+	}
+
+	printk(KERN_DEBUG "%s: using fixed link parameters\n", dev->name);
+
+	ag->duplex = pdata->duplex;
+	ag->speed = pdata->speed;
+
+	return ret;
+}
+
+static int ag71xx_phy_connect_multi(struct ag71xx *ag)
+{
+	struct net_device *dev = ag->dev;
+	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+	struct phy_device *phydev = NULL;
+	int phy_addr;
+	int ret = 0;
+
+	for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+		if (!(pdata->phy_mask & (1 << phy_addr)))
+			continue;
+
+		if (ag->mii_bus->phy_map[phy_addr] == NULL)
+			continue;
+
+		DBG("%s: PHY found at %s, uid=%08x\n",
+			dev->name,
+			dev_name(&ag->mii_bus->phy_map[phy_addr]->dev),
+			ag->mii_bus->phy_map[phy_addr]->phy_id);
+
+		if (phydev == NULL)
+			phydev = ag->mii_bus->phy_map[phy_addr];
+	}
+
+	if (!phydev) {
+		printk(KERN_ERR "%s: no PHY found with phy_mask=%08x\n",
+			dev->name, pdata->phy_mask);
+		return -ENODEV;
+	}
+
+	ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev),
+				  &ag71xx_phy_link_adjust, 0,
+				  pdata->phy_if_mode);
+
+	if (IS_ERR(ag->phy_dev)) {
+		printk(KERN_ERR "%s: could not connect to PHY at %s\n",
+			dev->name, dev_name(&phydev->dev));
+		return PTR_ERR(ag->phy_dev);
+	}
+
+	/* mask with MAC supported features */
+	if (pdata->has_gbit)
+		phydev->supported &= PHY_GBIT_FEATURES;
+	else
+		phydev->supported &= PHY_BASIC_FEATURES;
+
+	phydev->advertising = phydev->supported;
+
+	printk(KERN_DEBUG "%s: connected to PHY at %s [uid=%08x, driver=%s]\n",
+		dev->name, dev_name(&phydev->dev),
+		phydev->phy_id, phydev->drv->name);
+
+	ag->link = 0;
+	ag->speed = 0;
+	ag->duplex = -1;
+
+	return ret;
+}
+
+static int dev_is_class(struct device *dev, void *class)
+{
+	if (dev->class != NULL && !strcmp(dev->class->name, class))
+		return 1;
+
+	return 0;
+}
+
+static struct device *dev_find_class(struct device *parent, char *class)
+{
+	if (dev_is_class(parent, class)) {
+		get_device(parent);
+		return parent;
+	}
+
+	return device_find_child(parent, class, dev_is_class);
+}
+
+static struct mii_bus *dev_to_mii_bus(struct device *dev)
+{
+	struct device *d;
+
+	d = dev_find_class(dev, "mdio_bus");
+	if (d != NULL) {
+		struct mii_bus *bus;
+
+		bus = to_mii_bus(d);
+		put_device(d);
+
+		return bus;
+	}
+
+	return NULL;
+}
+
+int ag71xx_phy_connect(struct ag71xx *ag)
+{
+	struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+	ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev);
+	if (ag->mii_bus == NULL) {
+		printk(KERN_ERR "%s: unable to find MII bus on device '%s'\n",
+			ag->dev->name, dev_name(pdata->mii_bus_dev));
+		return -ENODEV;
+	}
+
+	/* Reset the mdio bus explicitly */
+	if (ag->mii_bus->reset) {
+		mutex_lock(&ag->mii_bus->mdio_lock);
+		ag->mii_bus->reset(ag->mii_bus);
+		mutex_unlock(&ag->mii_bus->mdio_lock);
+	}
+
+	if (pdata->phy_mask)
+		return ag71xx_phy_connect_multi(ag);
+
+	return ag71xx_phy_connect_fixed(ag);
+}
+
+void ag71xx_phy_disconnect(struct ag71xx *ag)
+{
+	if (ag->phy_dev)
+		phy_disconnect(ag->phy_dev);
+}
diff -Nur linux-2.6.35.7.orig/drivers/net/ag71xx/Kconfig linux-2.6.35.7/drivers/net/ag71xx/Kconfig
--- linux-2.6.35.7.orig/drivers/net/ag71xx/Kconfig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/ag71xx/Kconfig	2010-10-14 20:28:00.748098810 +0200
@@ -0,0 +1,33 @@
+config AG71XX
+	tristate "Atheros AR71xx built-in ethernet mac support"
+	depends on ATHEROS_AR71XX
+	select PHYLIB
+	help
+	  If you wish to compile a kernel for AR71xx/91xx and enable
+	  ethernet support, then you should always answer Y to this.
+
+if AG71XX
+
+config AG71XX_DEBUG
+	bool "Atheros AR71xx built-in ethernet driver debugging"
+	default n
+	help
+	  Atheros AR71xx built-in ethernet driver debugging messages.
+
+config AG71XX_DEBUG_FS
+	bool "Atheros AR71xx built-in ethernet driver debugfs support"
+	depends on DEBUG_FS
+	default n
+	help
+	  Say Y, if you need access to various statistics provided by
+	  the ag71xx driver.
+
+config AG71XX_AR8216_SUPPORT
+	bool "special support for the Atheros AR8216 switch"
+	default n
+	default y if AR71XX_MACH_WNR2000 || AR71XX_MACH_MZK_W04NU
+	help
+	  Say 'y' here if you want to enable special support for the
+	  Atheros AR8216 switch found on some boards.
+
+endif
diff -Nur linux-2.6.35.7.orig/drivers/net/ag71xx/Makefile linux-2.6.35.7/drivers/net/ag71xx/Makefile
--- linux-2.6.35.7.orig/drivers/net/ag71xx/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/ag71xx/Makefile	2010-10-14 20:28:00.784356250 +0200
@@ -0,0 +1,14 @@
+#
+# Makefile for the Atheros AR71xx built-in ethernet macs
+#
+
+ag71xx-y	+= ag71xx_main.o
+ag71xx-y	+= ag71xx_ethtool.o
+ag71xx-y	+= ag71xx_phy.o
+ag71xx-y	+= ag71xx_mdio.o
+
+ag71xx-$(CONFIG_AG71XX_DEBUG_FS)	+= ag71xx_debugfs.o
+ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT)	+= ag71xx_ar8216.o
+
+obj-$(CONFIG_AG71XX)	+= ag71xx.o
+
diff -Nur linux-2.6.35.7.orig/drivers/net/Kconfig linux-2.6.35.7/drivers/net/Kconfig
--- linux-2.6.35.7.orig/drivers/net/Kconfig	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/net/Kconfig	2010-10-14 20:28:00.828101196 +0200
@@ -2032,6 +2032,8 @@
 
 	  The safe and default value for this is N.
 
+source drivers/net/ag71xx/Kconfig
+
 config DL2K
 	tristate "DL2000/TC902x-based Gigabit Ethernet support"
 	depends on PCI
diff -Nur linux-2.6.35.7.orig/drivers/net/Kconfig.orig linux-2.6.35.7/drivers/net/Kconfig.orig
--- linux-2.6.35.7.orig/drivers/net/Kconfig.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/Kconfig.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,3314 @@
+#
+# Network device configuration
+#
+
+menuconfig NETDEVICES
+	default y if UML
+	depends on NET
+	bool "Network device support"
+	---help---
+	  You can say N here if you don't intend to connect your Linux box to
+	  any other computer at all.
+
+	  You'll have to say Y if your computer contains a network card that
+	  you want to use under Linux. If you are going to run SLIP or PPP over
+	  telephone line or null modem cable you need say Y here. Connecting
+	  two machines with parallel ports using PLIP needs this, as well as
+	  AX.25/KISS for sending Internet traffic over amateur radio links.
+
+	  See also "The Linux Network Administrator's Guide" by Olaf Kirch and
+	  Terry Dawson. Available at <http://www.tldp.org/guides.html>.
+
+	  If unsure, say Y.
+
+# All the following symbols are dependent on NETDEVICES - do not repeat
+# that for each of the symbols.
+if NETDEVICES
+
+config IFB
+	tristate "Intermediate Functional Block support"
+	depends on NET_CLS_ACT
+	---help---
+	  This is an intermediate driver that allows sharing of
+	  resources.
+	  To compile this driver as a module, choose M here: the module
+	  will be called ifb.  If you want to use more than one ifb
+	  device at a time, you need to compile this driver as a module.
+	  Instead of 'ifb', the devices will then be called 'ifb0',
+	  'ifb1' etc.
+	  Look at the iproute2 documentation directory for usage etc
+
+config DUMMY
+	tristate "Dummy net driver support"
+	---help---
+	  This is essentially a bit-bucket device (i.e. traffic you send to
+	  this device is consigned into oblivion) with a configurable IP
+	  address. It is most commonly used in order to make your currently
+	  inactive SLIP address seem like a real address for local programs.
+	  If you use SLIP or PPP, you might want to say Y here. Since this
+	  thing often comes in handy, the default is Y. It won't enlarge your
+	  kernel either. What a deal. Read about it in the Network
+	  Administrator's Guide, available from
+	  <http://www.tldp.org/docs.html#guide>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dummy.  If you want to use more than one dummy
+	  device at a time, you need to compile this driver as a module.
+	  Instead of 'dummy', the devices will then be called 'dummy0',
+	  'dummy1' etc.
+
+config BONDING
+	tristate "Bonding driver support"
+	depends on INET
+	depends on IPV6 || IPV6=n
+	---help---
+	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
+	  Channels together. This is called 'Etherchannel' by Cisco,
+	  'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
+
+	  The driver supports multiple bonding modes to allow for both high
+	  performance and high availability operation.
+
+	  Refer to <file:Documentation/networking/bonding.txt> for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bonding.
+
+config MACVLAN
+	tristate "MAC-VLAN support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  This allows one to create virtual interfaces that map packets to
+	  or from specific MAC addresses to a particular interface.
+
+	  Macvlan devices can be added using the "ip" command from the
+	  iproute2 package starting with the iproute2-2.6.23 release:
+
+	  "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called macvlan.
+
+config MACVTAP
+	tristate "MAC-VLAN based tap driver (EXPERIMENTAL)"
+	depends on MACVLAN
+	help
+	  This adds a specialized tap character device driver that is based
+	  on the MAC-VLAN network interface, called macvtap. A macvtap device
+	  can be added in the same way as a macvlan device, using 'type
+	  macvlan', and then be accessed through the tap user space interface.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called macvtap.
+
+config EQUALIZER
+	tristate "EQL (serial line load balancing) support"
+	---help---
+	  If you have two serial connections to some other computer (this
+	  usually requires two modems and two telephone lines) and you use
+	  SLIP (the protocol for sending Internet traffic over telephone
+	  lines) or PPP (a better SLIP) on them, you can make them behave like
+	  one double speed connection using this driver.  Naturally, this has
+	  to be supported at the other end as well, either with a similar EQL
+	  Linux driver or with a Livingston Portmaster 2e.
+
+	  Say Y if you want this and read
+	  <file:Documentation/networking/eql.txt>.  You may also want to read
+	  section 6.2 of the NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called eql.  If unsure, say N.
+
+config TUN
+	tristate "Universal TUN/TAP device driver support"
+	select CRC32
+	---help---
+	  TUN/TAP provides packet reception and transmission for user space
+	  programs.  It can be viewed as a simple Point-to-Point or Ethernet
+	  device, which instead of receiving packets from a physical media,
+	  receives them from user space program and instead of sending packets
+	  via physical media writes them to the user space program.
+
+	  When a program opens /dev/net/tun, driver creates and registers
+	  corresponding net device tunX or tapX.  After a program closed above
+	  devices, driver will automatically delete tunXX or tapXX device and
+	  all routes corresponding to it.
+
+	  Please read <file:Documentation/networking/tuntap.txt> for more
+	  information.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tun.
+
+	  If you don't know what to use this for, you don't need it.
+
+config VETH
+	tristate "Virtual ethernet pair device"
+	---help---
+	  This device is a local ethernet tunnel. Devices are created in pairs.
+	  When one end receives the packet it appears on its pair and vice
+	  versa.
+
+config NET_SB1000
+	tristate "General Instruments Surfboard 1000"
+	depends on PNP
+	---help---
+	  This is a driver for the General Instrument (also known as
+	  NextLevel) SURFboard 1000 internal
+	  cable modem. This is an ISA card which is used by a number of cable
+	  TV companies to provide cable modem access. It's a one-way
+	  downstream-only cable modem, meaning that your upstream net link is
+	  provided by your regular phone modem.
+
+	  At present this driver only compiles as a module, so say M here if
+	  you have this card. The module will be called sb1000. Then read
+	  <file:Documentation/networking/README.sb1000> for information on how
+	  to use this module, as it needs special ppp scripts for establishing
+	  a connection. Further documentation and the necessary scripts can be
+	  found at:
+
+	  <http://www.jacksonville.net/~fventuri/>
+	  <http://home.adelphia.net/~siglercm/sb1000.html>
+	  <http://linuxpower.cx/~cable/>
+
+	  If you don't have this card, of course say N.
+
+source "drivers/net/arcnet/Kconfig"
+
+source "drivers/net/phy/Kconfig"
+
+#
+#	Ethernet
+#
+
+menuconfig NET_ETHERNET
+	bool "Ethernet (10 or 100Mbit)"
+	depends on !UML
+	---help---
+	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
+	  type of Local Area Network (LAN) in universities and companies.
+
+	  Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
+	  coaxial cable, linking computers in a chain), 10BASE-T or twisted
+	  pair (10 Mbps over twisted pair cable, linking computers to central
+	  hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
+	  100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
+	  100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
+	  cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
+	  [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
+	  Ethernet (1 Gbps over optical fiber or short copper links).
+
+	  If your Linux machine will be connected to an Ethernet and you have
+	  an Ethernet network interface card (NIC) installed in your computer,
+	  say Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. You will then also have
+	  to say Y to the driver for your particular NIC.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Ethernet network cards. If unsure, say N.
+
+if NET_ETHERNET
+
+config MII
+	tristate "Generic Media Independent Interface device support"
+	help
+	  Most ethernet controllers have MII transceiver either as an external
+	  or internal device.  It is safe to say Y or M here even if your
+	  ethernet card lack MII.
+
+config MACB
+	tristate "Atmel MACB support"
+	depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9
+	select PHYLIB
+	help
+	  The Atmel MACB ethernet interface is found on many AT32 and AT91
+	  parts. Say Y to include support for the MACB chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called macb.
+
+source "drivers/net/arm/Kconfig"
+
+config AX88796
+	tristate "ASIX AX88796 NE2000 clone support"
+	depends on ARM || MIPS || SUPERH
+	select CRC32
+	select MII
+	help
+	  AX88796 driver, using platform bus to provide
+	  chip detection and resources
+
+config AX88796_93CX6
+	bool "ASIX AX88796 external 93CX6 eeprom support"
+	depends on AX88796
+	select EEPROM_93CX6
+	help
+	  Select this if your platform comes with an external 93CX6 eeprom.
+
+config MACE
+	tristate "MACE (Power Mac ethernet) support"
+	depends on PPC_PMAC && PPC32
+	select CRC32
+	help
+	  Power Macintoshes and clones with Ethernet built-in on the
+	  motherboard will usually use a MACE (Medium Access Control for
+	  Ethernet) interface. Say Y to include support for the MACE chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mace.
+
+config MACE_AAUI_PORT
+	bool "Use AAUI port instead of TP by default"
+	depends on MACE
+	help
+	  Some Apple machines (notably the Apple Network Server) which use the
+	  MACE ethernet chip have an Apple AUI port (small 15-pin connector),
+	  instead of an 8-pin RJ45 connector for twisted-pair ethernet.  Say
+	  Y here if you have such a machine.  If unsure, say N.
+	  The driver will default to AAUI on ANS anyway, and if you use it as
+	  a module, you can provide the port_aaui=0|1 to force the driver.
+
+config BMAC
+	tristate "BMAC (G3 ethernet) support"
+	depends on PPC_PMAC && PPC32
+	select CRC32
+	help
+	  Say Y for support of BMAC Ethernet interfaces. These are used on G3
+	  computers.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bmac.
+
+config ARIADNE
+	tristate "Ariadne support"
+	depends on ZORRO
+	help
+	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
+	  Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ariadne.
+
+config A2065
+	tristate "A2065 support"
+	depends on ZORRO
+	select CRC32
+	help
+	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
+	  say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called a2065.
+
+config HYDRA
+	tristate "Hydra support"
+	depends on ZORRO
+	select CRC32
+	help
+	  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called hydra.
+
+config ZORRO8390
+	tristate "Zorro NS8390-based Ethernet support"
+	depends on ZORRO
+	select CRC32
+	help
+	  This driver is for Zorro Ethernet cards using an NS8390-compatible
+	  chipset, like the Village Tronic Ariadne II and the Individual
+	  Computers X-Surf Ethernet cards. If you have such a card, say Y.
+	  Otherwise, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called zorro8390.
+
+config APNE
+	tristate "PCMCIA NE2000 support"
+	depends on AMIGA_PCMCIA
+	select CRC32
+	help
+	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
+	  say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called apne.
+
+config MAC8390
+	bool "Macintosh NS 8390 based ethernet cards"
+	depends on MAC
+	select CRC32
+	help
+	  If you want to include a driver to support Nubus or LC-PDS
+	  Ethernet cards using an NS8390 chipset or its equivalent, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config MAC89x0
+	tristate "Macintosh CS89x0 based ethernet cards"
+	depends on MAC
+	---help---
+	  Support for CS89x0 chipset based Ethernet cards.  If you have a
+	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. This module will
+	  be called mac89x0.
+
+config MACSONIC
+	tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
+	depends on MAC
+	---help---
+	  Support for NatSemi SONIC based Ethernet devices.  This includes
+	  the onboard Ethernet in many Quadras as well as some LC-PDS,
+	  a few Nubus and all known Comm Slot Ethernet cards.  If you have
+	  one of these say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. This module will
+	  be called macsonic.
+
+config MACMACE
+	bool "Macintosh (AV) onboard MACE ethernet"
+	depends on MAC
+	select CRC32
+	help
+	  Support for the onboard AMD 79C940 MACE Ethernet controller used in
+	  the 660AV and 840AV Macintosh.  If you have one of these Macintoshes
+	  say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config MVME147_NET
+	tristate "MVME147 (Lance) Ethernet support"
+	depends on MVME147
+	select CRC32
+	help
+	  Support for the on-board Ethernet interface on the Motorola MVME147
+	  single-board computer.  Say Y here to include the
+	  driver for this chip in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config MVME16x_NET
+	tristate "MVME16x Ethernet support"
+	depends on MVME16x
+	help
+	  This is the driver for the Ethernet interface on the Motorola
+	  MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
+	  driver for this chip in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config BVME6000_NET
+	tristate "BVME6000 Ethernet support"
+	depends on BVME6000
+	help
+	  This is the driver for the Ethernet interface on BVME4000 and
+	  BVME6000 VME boards.  Say Y here to include the driver for this chip
+	  in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config ATARILANCE
+	tristate "Atari Lance support"
+	depends on ATARI
+	help
+	  Say Y to include support for several Atari Ethernet adapters based
+	  on the AMD Lance chipset: RieblCard (with or without battery), or
+	  PAMCard VME (also the version by Rhotron, with different addresses).
+
+config SUN3LANCE
+	tristate "Sun3/Sun3x on-board LANCE support"
+	depends on SUN3 || SUN3X
+	help
+	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
+	  featured an AMD Lance 10Mbit Ethernet controller on board; say Y
+	  here to compile in the Linux driver for this and enable Ethernet.
+	  General Linux information on the Sun 3 and 3x series (now
+	  discontinued) is at
+	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+	  If you're not building a kernel for a Sun 3, say N.
+
+config SUN3_82586
+	bool "Sun3 on-board Intel 82586 support"
+	depends on SUN3
+	help
+	  This driver enables support for the on-board Intel 82586 based
+	  Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
+	  that this driver does not support 82586-based adapters on additional
+	  VME boards.
+
+config HPLANCE
+	bool "HP on-board LANCE support"
+	depends on DIO
+	select CRC32
+	help
+	  If you want to use the builtin "LANCE" Ethernet controller on an
+	  HP300 machine, say Y here.
+
+config LASI_82596
+	tristate "Lasi ethernet"
+	depends on GSC
+	help
+	  Say Y here to support the builtin Intel 82596 ethernet controller
+	  found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
+
+config SNI_82596
+	tristate "SNI RM ethernet"
+	depends on NET_ETHERNET && SNI_RM
+	help
+	  Say Y here to support the on-board Intel 82596 ethernet controller
+	  built into SNI RM machines.
+
+config KORINA
+	tristate "Korina (IDT RC32434) Ethernet support"
+	depends on NET_ETHERNET && MIKROTIK_RB532
+	help
+	  If you have a Mikrotik RouterBoard 500 or IDT RC32434
+	  based system say Y. Otherwise say N.
+
+config MIPS_JAZZ_SONIC
+	tristate "MIPS JAZZ onboard SONIC Ethernet support"
+	depends on MACH_JAZZ
+	help
+	  This is the driver for the onboard card of MIPS Magnum 4000,
+	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
+
+config XTENSA_XT2000_SONIC
+	tristate "Xtensa XT2000 onboard SONIC Ethernet support"
+	depends on XTENSA_PLATFORM_XT2000
+	help
+	  This is the driver for the onboard card of the Xtensa XT2000 board.
+
+config MIPS_AU1X00_ENET
+	tristate "MIPS AU1000 Ethernet support"
+	depends on SOC_AU1X00
+	select PHYLIB
+	select CRC32
+	help
+	  If you have an Alchemy Semi AU1X00 based system
+	  say Y.  Otherwise, say N.
+
+config SGI_IOC3_ETH
+	bool "SGI IOC3 Ethernet"
+	depends on PCI && SGI_IP27
+	select CRC32
+	select MII
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config MIPS_SIM_NET
+	tristate "MIPS simulator Network device"
+	depends on MIPS_SIM
+	help
+	  The MIPSNET device is a simple Ethernet network device which is
+	  emulated by the MIPS Simulator.
+	  If you are not using a MIPSsim or are unsure, say N.
+
+config SGI_O2MACE_ETH
+	tristate "SGI O2 MACE Fast Ethernet support"
+	depends on SGI_IP32=y
+
+config STNIC
+	tristate "National DP83902AV  support"
+	depends on SUPERH
+	select CRC32
+	help
+	  Support for cards based on the National Semiconductor DP83902AV
+	  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
+	  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
+	  <http://www.national.com/pf/DP/DP83902A.html>.
+
+	  If unsure, say N.
+
+config SH_ETH
+	tristate "Renesas SuperH Ethernet support"
+	depends on SUPERH && \
+		(CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \
+		 CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
+		 CPU_SUBTYPE_SH7724)
+	select CRC32
+	select MII
+	select MDIO_BITBANG
+	select PHYLIB
+	help
+	  Renesas SuperH Ethernet device driver.
+	  This driver support SH7710, SH7712, SH7763, SH7619, and SH7724.
+
+config SUNLANCE
+	tristate "Sun LANCE support"
+	depends on SBUS
+	select CRC32
+	help
+	  This driver supports the "le" interface present on all 32-bit Sparc
+	  systems, on some older Ultra systems and as an Sbus option.  These
+	  cards are based on the AMD Lance chipset, which is better known
+	  via the NE2100 cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunlance.
+
+config HAPPYMEAL
+	tristate "Sun Happy Meal 10/100baseT support"
+	depends on SBUS || PCI
+	select CRC32
+	help
+	  This driver supports the "hme" interface present on most Ultra
+	  systems and as an option on older Sbus systems. This driver supports
+	  both PCI and Sbus devices. This driver also supports the "qfe" quad
+	  100baseT device available in both PCI and Sbus configurations.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunhme.
+
+config SUNBMAC
+	tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
+	depends on SBUS && EXPERIMENTAL
+	select CRC32
+	help
+	  This driver supports the "be" interface available as an Sbus option.
+	  This is Sun's older 100baseT Ethernet device.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunbmac.
+
+config SUNQE
+	tristate "Sun QuadEthernet support"
+	depends on SBUS
+	select CRC32
+	help
+	  This driver supports the "qe" 10baseT Ethernet device, available as
+	  an Sbus option. Note that this is not the same as Quad FastEthernet
+	  "qfe" which is supported by the Happy Meal driver instead.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sunqe.
+
+config SUNGEM
+	tristate "Sun GEM support"
+	depends on PCI
+	select CRC32
+	help
+	  Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
+	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
+
+config CASSINI
+	tristate "Sun Cassini support"
+	depends on PCI
+	select CRC32
+	help
+	  Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
+	  <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
+
+config SUNVNET
+	tristate "Sun Virtual Network support"
+	depends on SUN_LDOMS
+	help
+	  Support for virtual network devices under Sun Logical Domains.
+
+config NET_VENDOR_3COM
+	bool "3COM cards"
+	depends on ISA || EISA || MCA || PCI
+	help
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about 3COM cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+config EL1
+	tristate "3c501 \"EtherLink\" support"
+	depends on NET_VENDOR_3COM && ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Also, consider buying a
+	  new card, since the 3c501 is slow, broken, and obsolete: you will
+	  have problems.  Some people suggest to ping ("man ping") a nearby
+	  machine every minute ("man cron") when using this card.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c501.
+
+config EL2
+	tristate "3c503 \"EtherLink II\" support"
+	depends on NET_VENDOR_3COM && ISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c503.
+
+config ELPLUS
+	tristate "3c505 \"EtherLink Plus\" support"
+	depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
+	---help---
+	  Information about this network (Ethernet) card can be found in
+	  <file:Documentation/networking/3c505.txt>.  If you have a card of
+	  this type, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c505.
+
+config EL16
+	tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
+	depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c507.
+
+config EL3
+	tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
+	depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
+	---help---
+	  If you have a network (Ethernet) card belonging to the 3Com
+	  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
+	  from <http://www.tldp.org/docs.html#howto>.
+
+	  If your card is not working you may need to use the DOS
+	  setup disk to disable Plug & Play mode, and to select the default
+	  media type.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c509.
+
+config 3C515
+	tristate "3c515 ISA \"Fast EtherLink\""
+	depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
+	help
+	  If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
+	  network card, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c515.
+
+config ELMC
+	tristate "3c523 \"EtherLink/MC\" support"
+	depends on NET_VENDOR_3COM && MCA_LEGACY
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c523.
+
+config ELMC_II
+	tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
+	depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c527.
+
+config VORTEX
+	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
+	depends on NET_VENDOR_3COM && (PCI || EISA)
+	select MII
+	---help---
+	  This option enables driver support for a large number of 10Mbps and
+	  10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
+
+	  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+	  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
+	  "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
+	  "Tornado"   (3c905)                                  PCI
+	  "Hurricane" (3c555/3cSOHO)                           PCI
+
+	  If you have such a card, say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>. More
+	  specific information is in
+	  <file:Documentation/networking/vortex.txt> and in the comments at
+	  the beginning of <file:drivers/net/3c59x.c>.
+
+	  To compile this support as a module, choose M here.
+
+config TYPHOON
+	tristate "3cr990 series \"Typhoon\" support"
+	depends on NET_VENDOR_3COM && PCI
+	select CRC32
+	---help---
+	  This option enables driver support for the 3cr990 series of cards:
+
+	  3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
+	  3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
+	  3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
+
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called typhoon.
+
+config LANCE
+	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
+	depends on ISA && ISA_DMA_API
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
+	  of this type.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called lance.  This is recommended.
+
+config NET_VENDOR_SMC
+	bool "Western Digital/SMC cards"
+	depends on ISA || MCA || EISA || MAC
+	help
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Western Digital cards. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+config WD80x3
+	tristate "WD80*3 support"
+	depends on NET_VENDOR_SMC && ISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called wd.
+
+config ULTRAMCA
+	tristate "SMC Ultra MCA support"
+	depends on NET_VENDOR_SMC && MCA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type and are running
+	  an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called smc-mca.
+
+config ULTRA
+	tristate "SMC Ultra support"
+	depends on NET_VENDOR_SMC && ISA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Important: There have been many reports that, with some motherboards
+	  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
+	  such as some BusLogic models) causes corruption problems with many
+	  operating systems. The Linux smc-ultra driver has a work-around for
+	  this but keep it in mind if you have such a SCSI card and have
+	  problems.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called smc-ultra.
+
+config ULTRA32
+	tristate "SMC Ultra32 EISA support"
+	depends on NET_VENDOR_SMC && EISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called smc-ultra32.
+
+config BFIN_MAC
+	tristate "Blackfin on-chip MAC support"
+	depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
+	select CRC32
+	select MII
+	select PHYLIB
+	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
+	help
+	  This is the driver for Blackfin on-chip mac device. Say Y if you want it
+	  compiled into the kernel. This driver is also available as a module
+	  ( = code which can be inserted in and removed from the running kernel
+	  whenever you want). The module will be called bfin_mac.
+
+config BFIN_MAC_USE_L1
+	bool "Use L1 memory for rx/tx packets"
+	depends on BFIN_MAC && (BF527 || BF537)
+	default y
+	help
+	  To get maximum network performance, you should use L1 memory as rx/tx buffers.
+	  Say N here if you want to reserve L1 memory for other uses.
+
+config BFIN_TX_DESC_NUM
+	int "Number of transmit buffer packets"
+	depends on BFIN_MAC
+	range 6 10 if BFIN_MAC_USE_L1
+	range 10 100
+	default "10"
+	help
+	  Set the number of buffer packets used in driver.
+
+config BFIN_RX_DESC_NUM
+	int "Number of receive buffer packets"
+	depends on BFIN_MAC
+	range 20 100 if BFIN_MAC_USE_L1
+	range 20 800
+	default "20"
+	help
+	  Set the number of buffer packets used in driver.
+
+config BFIN_MAC_RMII
+	bool "RMII PHY Interface"
+	depends on BFIN_MAC
+	default y if BFIN527_EZKIT
+	default n if BFIN537_STAMP
+	help
+	  Use Reduced PHY MII Interface
+
+config BFIN_MAC_USE_HWSTAMP
+	bool "Use IEEE 1588 hwstamp"
+	depends on BFIN_MAC && BF518
+	default y
+	help
+	  To support the IEEE 1588 Precision Time Protocol (PTP), select y here
+
+config SMC9194
+	tristate "SMC 9194 support"
+	depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
+	select CRC32
+	---help---
+	  This is support for the SMC9xxx based Ethernet cards. Choose this
+	  option if you have a DELL laptop with the docking station, or
+	  another SMC9192/9194 based chipset.  Say Y if you want it compiled
+	  into the kernel, and read the file
+	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called smc9194.
+
+config SMC91X
+	tristate "SMC 91C9x/91C1xxx support"
+	select CRC32
+	select MII
+	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
+		MIPS || BLACKFIN || MN10300 || COLDFIRE
+	help
+	  This is a driver for SMC's 91x series of Ethernet chipsets,
+	  including the SMC91C94 and the SMC91C111. Say Y if you want it
+	  compiled into the kernel, and read the file
+	  <file:Documentation/networking/smc9.txt>  and the Ethernet-HOWTO,
+	  available from  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called smc91x.  If you want to compile it as a
+	  module, say M here and read <file:Documentation/kbuild/modules.txt>.
+
+config NET_NETX
+	tristate "NetX Ethernet support"
+	select MII
+	depends on ARCH_NETX
+	help
+	  This is support for the Hilscher netX builtin Ethernet ports
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called netx-eth.
+
+config TI_DAVINCI_EMAC
+	tristate "TI DaVinci EMAC Support"
+	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+	select PHYLIB
+	help
+	  This driver supports TI's DaVinci Ethernet .
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called davinci_emac_driver.  This is recommended.
+
+config DM9000
+	tristate "DM9000 support"
+	depends on ARM || BLACKFIN || MIPS
+	select CRC32
+	select MII
+	---help---
+	  Support for DM9000 chipset.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called dm9000.
+
+config DM9000_DEBUGLEVEL
+	int "DM9000 maximum debug level"
+	depends on DM9000
+	default 4
+	help
+	  The maximum level of debugging code compiled into the DM9000
+	  driver.
+
+config DM9000_FORCE_SIMPLE_PHY_POLL
+	bool "Force simple NSR based PHY polling"
+	depends on DM9000
+	---help---
+	  This configuration forces the DM9000 to use the NSR's LinkStatus
+	  bit to determine if the link is up or down instead of the more
+	  costly MII PHY reads. Note, this will not work if the chip is
+	  operating with an external PHY.
+
+config ENC28J60
+	tristate "ENC28J60 support"
+	depends on EXPERIMENTAL && SPI && NET_ETHERNET
+	select CRC32
+	---help---
+	  Support for the Microchip EN28J60 ethernet chip.
+
+	  To compile this driver as a module, choose M here. The module will be
+	  called enc28j60.
+
+config ENC28J60_WRITEVERIFY
+	bool "Enable write verify"
+	depends on ENC28J60
+	---help---
+	  Enable the verify after the buffer write useful for debugging purpose.
+	  If unsure, say N.
+
+config ETHOC
+	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
+	depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA
+	select MII
+	select PHYLIB
+	select CRC32
+	select BITREVERSE
+	help
+	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
+
+config GRETH
+	tristate "Aeroflex Gaisler GRETH Ethernet MAC support"
+	depends on SPARC
+	select PHYLIB
+	select CRC32
+	help
+	  Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
+
+config SMC911X
+	tristate "SMSC LAN911[5678] support"
+	select CRC32
+	select MII
+	depends on ARM || SUPERH
+	help
+	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
+	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
+	  Say Y if you want it compiled into the kernel, 
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  This driver is also available as a module. The module will be 
+	  called smc911x.  If you want to compile it as a module, say M 
+	  here and read <file:Documentation/kbuild/modules.txt>
+
+config SMSC911X
+	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
+	depends on ARM || SUPERH || BLACKFIN || MIPS
+	select CRC32
+	select MII
+	select PHYLIB
+	---help---
+	  Say Y here if you want support for SMSC LAN911x and LAN921x families
+	  of ethernet controllers.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called smsc911x.
+
+config NET_VENDOR_RACAL
+	bool "Racal-Interlan (Micom) NI cards"
+	depends on ISA
+	help
+	  If you have a network (Ethernet) card belonging to this class, such
+	  as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about NI cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+config NI5010
+	tristate "NI5010 support (EXPERIMENTAL)"
+	depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. Note that this is still
+	  experimental code.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ni5010.
+
+config NI52
+	tristate "NI5210 support"
+	depends on NET_VENDOR_RACAL && ISA
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ni52.
+
+config NI65
+	tristate "NI6510 support"
+	depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ni65.
+
+config DNET
+	tristate "Dave ethernet support (DNET)"
+	depends on NET_ETHERNET && HAS_IOMEM
+	select PHYLIB
+	help
+	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.
+	  Say Y to include support for the DNET chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dnet.
+
+source "drivers/net/tulip/Kconfig"
+
+config AT1700
+	tristate "AT1700/1720 support (EXPERIMENTAL)"
+	depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called at1700.
+
+config DEPCA
+	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
+	depends on ISA || EISA || MCA
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto> as well as
+	  <file:drivers/net/depca.c>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called depca.
+
+config HP100
+	tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
+	depends on ISA || EISA || PCI
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called hp100.
+
+config NET_ISA
+	bool "Other ISA cards"
+	depends on ISA
+	---help---
+	  If your network (Ethernet) card hasn't been mentioned yet and its
+	  bus system (that's the way the cards talks to the other components
+	  of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
+	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  If unsure, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the remaining ISA network card questions. If you say Y, you will be
+	  asked for your specific card in the following questions.
+
+config E2100
+	tristate "Cabletron E21xx support"
+	depends on NET_ISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called e2100.
+
+config EWRK3
+	tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
+	depends on NET_ISA
+	select CRC32
+	---help---
+	  This driver supports the DE203, DE204 and DE205 network (Ethernet)
+	  cards. If this is for you, say Y and read
+	  <file:Documentation/networking/ewrk3.txt> in the kernel source as
+	  well as the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ewrk3.
+
+config EEXPRESS
+	tristate "EtherExpress 16 support"
+	depends on NET_ISA
+	---help---
+	  If you have an EtherExpress16 network (Ethernet) card, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that the Intel
+	  EtherExpress16 card used to be regarded as a very poor choice
+	  because the driver was very unreliable. We now have a new driver
+	  that should do better.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called eexpress.
+
+config EEXPRESS_PRO
+	tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
+	depends on NET_ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y. This
+	  driver supports Intel i82595{FX,TX} based boards. Note however
+	  that the EtherExpress PRO/100 Ethernet card has its own separate
+	  driver.  Please read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called eepro.
+
+config HPLAN_PLUS
+	tristate "HP PCLAN+ (27247B and 27252A) support"
+	depends on NET_ISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called hp-plus.
+
+config HPLAN
+	tristate "HP PCLAN (27245 and other 27xxx series) support"
+	depends on NET_ISA
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called hp.
+
+config LP486E
+	tristate "LP486E on board Ethernet"
+	depends on NET_ISA
+	help
+	  Say Y here to support the 82596-based on-board Ethernet controller
+	  for the Panther motherboard, which is one of the two shipped in the
+	  Intel Professional Workstation.
+
+config ETH16I
+	tristate "ICL EtherTeam 16i/32 support"
+	depends on NET_ISA
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called eth16i.
+
+config NE2000
+	tristate "NE2000/NE1000 support"
+	depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Many Ethernet cards
+	  without a specific driver are compatible with NE2000.
+
+	  If you have a PCI NE2000 card however, say N here and Y to "PCI
+	  NE2000 and clone support" under "EISA, VLB, PCI and on board
+	  controllers" below. If you have a NE2000 card and are running on
+	  an MCA system (a bus system used on some IBM PS/2 computers and
+	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
+	  below.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ne.
+
+config ZNET
+	tristate "Zenith Z-Note support (EXPERIMENTAL)"
+	depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
+	help
+	  The Zenith Z-Note notebook computer has a built-in network
+	  (Ethernet) card, and this is the Linux driver for it. Note that the
+	  IBM Thinkpad 300 is compatible with the Z-Note and is also supported
+	  by this driver. Read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+config SEEQ8005
+	tristate "SEEQ8005 support (EXPERIMENTAL)"
+	depends on NET_ISA && EXPERIMENTAL
+	help
+	  This is a driver for the SEEQ 8005 network (Ethernet) card.  If this
+	  is for you, read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called seeq8005.
+
+config NE2_MCA
+	tristate "NE/2 (ne2000 MCA version) support"
+	depends on MCA_LEGACY
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ne2.
+
+config IBMLANA
+	tristate "IBM LAN Adapter/A support"
+	depends on MCA
+	---help---
+	  This is a Micro Channel Ethernet adapter.  You need to set
+	  CONFIG_MCA to use this driver.  It is both available as an in-kernel
+	  driver and as a module.
+
+	  To compile this driver as a module, choose M here. The only
+	  currently supported card is the IBM LAN Adapter/A for Ethernet.  It
+	  will both support 16K and 32K memory windows, however a 32K window
+	  gives a better security against packet losses.  Usage of multiple
+	  boards with this driver should be possible, but has not been tested
+	  up to now due to lack of hardware.
+
+config IBMVETH
+	tristate "IBM LAN Virtual Ethernet support"
+	depends on PPC_PSERIES
+	---help---
+	  This driver supports virtual ethernet adapters on newer IBM iSeries
+	  and pSeries systems.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called ibmveth.
+
+source "drivers/net/ibm_newemac/Kconfig"
+
+config NET_PCI
+	bool "EISA, VLB, PCI and on board controllers"
+	depends on ISA || EISA || PCI
+	help
+	  This is another class of network cards which attach directly to the
+	  bus. If you have one of those, say Y and read the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about this class of network cards. If you say Y, you
+	  will be asked for your specific card in the following questions. If
+	  you are unsure, say Y.
+
+config PCNET32
+	tristate "AMD PCnet32 PCI support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
+	  answer Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called pcnet32.
+
+config AMD8111_ETH
+	tristate "AMD 8111 (new PCI lance) support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  If you have an AMD 8111-based PCI lance ethernet card,
+	  answer Y here and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called amd8111e.
+
+config ADAPTEC_STARFIRE
+	tristate "Adaptec Starfire/DuraLAN support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
+	  adapter. The DuraLAN chip is used on the 64 bit PCI boards from
+	  Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
+	  driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called starfire.  This is recommended.
+
+config AC3200
+	tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
+	depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ac3200.
+
+config KSZ884X_PCI
+	tristate "Micrel KSZ8841/2 PCI"
+	depends on NET_PCI && PCI
+	select MII
+	select CRC32
+	help
+	  This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ksz884x.
+
+config APRICOT
+	tristate "Apricot Xen-II on board Ethernet"
+	depends on NET_PCI && ISA
+	help
+	  If you have a network (Ethernet) controller of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called apricot.
+
+config B44
+	tristate "Broadcom 440x/47xx ethernet support"
+	depends on SSB_POSSIBLE && HAS_DMA
+	select SSB
+	select MII
+	help
+	  If you have a network (Ethernet) controller of this type, say Y
+	  or M and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called b44.
+
+# Auto-select SSB PCI-HOST support, if possible
+config B44_PCI_AUTOSELECT
+	bool
+	depends on B44 && SSB_PCIHOST_POSSIBLE
+	select SSB_PCIHOST
+	default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B44_PCICORE_AUTOSELECT
+	bool
+	depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
+	select SSB_DRIVER_PCICORE
+	default y
+
+config B44_PCI
+	bool
+	depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
+	default y
+
+config FORCEDETH
+	tristate "nForce Ethernet support"
+	depends on NET_PCI && PCI
+	help
+	  If you have a network (Ethernet) controller of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called forcedeth.
+
+config CS89x0
+	tristate "CS89x0 support"
+	depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
+		|| ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)
+	---help---
+	  Support for CS89x0 chipset based Ethernet cards. If you have a
+	  network (Ethernet) card of this type, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto> as well as
+	  <file:Documentation/networking/cs89x0.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called cs89x0.
+
+config CS89x0_NONISA_IRQ
+	def_bool y
+	depends on CS89x0 != n
+	depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS
+
+config TC35815
+	tristate "TOSHIBA TC35815 Ethernet support"
+	depends on NET_PCI && PCI && MIPS
+	select PHYLIB
+
+config E100
+	tristate "Intel(R) PRO/100+ support"
+	depends on NET_PCI && PCI
+	select MII
+	---help---
+	  This driver supports Intel(R) PRO/100 family of adapters.
+	  To verify that your adapter is supported, find the board ID number 
+	  on the adapter. Look for a label that has a barcode and a number 
+	  in the format 123456-001 (six digits hyphen three digits). 
+
+	  Use the above information and the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+          to identify the adapter.
+
+	  For the latest Intel PRO/100 network driver for Linux, see:
+
+	  <http://appsr.intel.com/scripts-df/support_intel.asp>
+
+	  More specific information on configuring the driver is in 
+	  <file:Documentation/networking/e100.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called e100.
+
+config LNE390
+	tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
+	depends on NET_PCI && EISA && EXPERIMENTAL
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called lne390.
+
+config FEALNX
+	tristate "Myson MTD-8xx PCI Ethernet support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
+	  cards. Specifications and data at
+	  <http://www.myson.com.hk/mtd/datasheet/>.
+
+config NATSEMI
+	tristate "National Semiconductor DP8381x series PCI Ethernet support"
+	depends on NET_PCI && PCI
+	select CRC32
+	help
+	  This driver is for the National Semiconductor DP83810 series,
+	  which is used in cards from PureData, NetGear, Linksys
+	  and others, including the 83815 chip.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/natsemi.html>.
+
+config NE2K_PCI
+	tristate "PCI NE2000 and clones support (see help)"
+	depends on NET_PCI && PCI
+	select CRC32
+	---help---
+	  This driver is for NE2000 compatible PCI cards. It will not work
+	  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
+	  support" below). If you have a PCI NE2000 network (Ethernet) card,
+	  say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  This driver also works for the following NE2000 clone cards:
+	  RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
+	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
+	  Holtek HT80232    Holtek HT80229
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ne2k-pci.
+
+config NE3210
+	tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
+	depends on NET_PCI && EISA && EXPERIMENTAL
+	select CRC32
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that this driver
+	  will NOT WORK for NE3200 cards as they are completely different.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ne3210.
+
+config ES3210
+	tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
+	depends on NET_PCI && EISA && EXPERIMENTAL
+	select CRC32
+	help
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called es3210.
+
+config 8139CP
+	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
+	depends on NET_PCI && PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	help
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL8139C+ chips. If you have one of those, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8139cp.  This is recommended.
+
+config 8139TOO
+	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the RTL 8129/8130/8139 chips. If you have one of those, say Y and
+	  read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8139too.  This is recommended.
+
+config 8139TOO_PIO
+	bool "Use PIO instead of MMIO"
+	default y
+	depends on 8139TOO
+	help
+	  This instructs the driver to use programmed I/O ports (PIO) instead
+	  of PCI shared memory (MMIO).  This can possibly solve some problems
+	  in case your mainboard has memory consistency issues.  If unsure,
+	  say N.
+
+config 8139TOO_TUNE_TWISTER
+	bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
+	depends on 8139TOO
+	help
+	  This implements a function which might come in handy in case you
+	  are using low quality on long cabling. It is required for RealTek
+	  RTL-8139 revision K boards, and totally unused otherwise.  It tries
+	  to match the transceiver to the cable characteristics. This is
+	  experimental since hardly documented by the manufacturer.
+	  If unsure, say Y.
+
+config 8139TOO_8129
+	bool "Support for older RTL-8129/8130 boards"
+	depends on 8139TOO
+	help
+	  This enables support for the older and uncommon RTL-8129 and
+	  RTL-8130 chips, which support MII via an external transceiver,
+	  instead of an internal one.  Disabling this option will save some
+	  memory by making the code size smaller.  If unsure, say Y.
+
+config 8139_OLD_RX_RESET
+	bool "Use older RX-reset method"
+	depends on 8139TOO
+	help
+	  The 8139too driver was recently updated to contain a more rapid
+	  reset sequence, in the face of severe receive errors.  This "new"
+	  RX-reset method should be adequate for all boards.  But if you
+	  experience problems, you can enable this option to restore the
+	  old RX-reset behavior.  If unsure, say N.
+
+config R6040
+	tristate "RDC R6040 Fast Ethernet Adapter support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  This is a driver for the R6040 Fast Ethernet MACs found in the
+	  the RDC R-321x System-on-chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called r6040. This is recommended.
+
+config SIS900
+	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
+	  SiS 630 and SiS 540 chipsets.
+
+	  This driver also supports AMD 79C901 HomePNA so that you can use
+	  your phone line as a network cable.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis900.  This is recommended.
+
+config EPIC100
+	tristate "SMC EtherPower II"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
+	  which is based on the SMC83c17x (EPIC/100).
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/epic100.html>.
+
+config SMSC9420
+	tristate "SMSC LAN9420 PCI ethernet adapter support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select PHYLIB
+	select SMSC_PHY
+	help
+	  This is a driver for SMSC's LAN9420 PCI ethernet adapter.
+	  Say Y if you want it compiled into the kernel,
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  This driver is also available as a module. The module will be
+	  called smsc9420.  If you want to compile it as a module, say M
+	  here and read <file:Documentation/kbuild/modules.txt>
+
+config SUNDANCE
+	tristate "Sundance Alta support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  This driver is for the Sundance "Alta" chip.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/sundance.html>.
+
+config SUNDANCE_MMIO
+	bool "Use MMIO instead of PIO"
+	depends on SUNDANCE
+	help
+	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
+	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
+	  is known to solve bugs on certain chips.
+
+	  If unsure, say N.
+
+config TLAN
+	tristate "TI ThunderLAN support"
+	depends on NET_PCI && (PCI || EISA)
+	---help---
+	  If you have a PCI Ethernet network card based on the ThunderLAN chip
+	  which is supported by this driver, say Y and read the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Devices currently supported by this driver are Compaq Netelligent,
+	  Compaq NetFlex and Olicom cards.  Please read the file
+	  <file:Documentation/networking/tlan.txt> for more details.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called tlan.
+
+	  Please email feedback to <torben.mathiasen@compaq.com>.
+
+config KS8842
+	tristate "Micrel KSZ8842"
+	depends on HAS_IOMEM
+	help
+	  This platform driver is for Micrel KSZ8842 / KS8842
+	  2-port ethernet switch chip (managed, VLAN, QoS).
+
+config KS8851
+       tristate "Micrel KS8851 SPI"
+       depends on SPI
+       select MII
+	select CRC32
+       help
+         SPI driver for Micrel KS8851 SPI attached network chip.
+
+config KS8851_MLL
+	tristate "Micrel KS8851 MLL"
+	depends on HAS_IOMEM
+	select MII
+	help
+	  This platform driver is for Micrel KS8851 Address/data bus
+	  multiplexed network chip.
+
+config VIA_RHINE
+	tristate "VIA Rhine support"
+	depends on NET_PCI && PCI
+	select CRC32
+	select MII
+	help
+	  If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
+	  Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
+	  Ethernet functions can also be found integrated on South Bridges
+	  (e.g. VT8235).
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called via-rhine.
+
+config VIA_RHINE_MMIO
+	bool "Use MMIO instead of PIO"
+	depends on VIA_RHINE
+	help
+	  This instructs the driver to use PCI shared memory (MMIO) instead of
+	  programmed I/O ports (PIO). Enabling this gives an improvement in
+	  processing time in parts of the driver.
+
+	  If unsure, say Y.
+
+config SC92031
+	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+	depends on NET_PCI && PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+	  have one of these, say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sc92031.  This is recommended.
+
+config CPMAC
+	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
+	depends on NET_ETHERNET && EXPERIMENTAL && AR7
+	select PHYLIB
+	help
+	  TI AR7 CPMAC Ethernet support
+
+config NET_POCKET
+	bool "Pocket and portable adapters"
+	depends on PARPORT
+	---help---
+	  Cute little network (Ethernet) devices which attach to the parallel
+	  port ("pocket adapters"), commonly used with laptops. If you have
+	  one of those, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  If you want to plug a network (or some other) card into the PCMCIA
+	  (or PC-card) slot of your laptop instead (PCMCIA is the standard for
+	  credit card size extension cards used by all modern laptops), you
+	  need the pcmcia-cs package (location contained in the file
+	  <file:Documentation/Changes>) and you can say N here.
+
+	  Laptop users should read the Linux Laptop home page at
+	  <http://www.linux-on-laptops.com/> or
+	  Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about this class of network devices. If you say Y, you
+	  will be asked for your specific device in the following questions.
+
+config ATP
+	tristate "AT-LAN-TEC/RealTek pocket adapter support"
+	depends on NET_POCKET && PARPORT && X86
+	select CRC32
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>, if you
+	  want to use this.  If you intend to use this driver, you should have
+	  said N to the "Parallel printer support", because the two drivers
+	  don't like each other.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called atp.
+
+config DE600
+	tristate "D-Link DE600 pocket adapter support"
+	depends on NET_POCKET && PARPORT
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, if you want to use
+	  this. It is possible to have several devices share a single parallel
+	  port and it is safe to compile the corresponding drivers into the
+	  kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called de600.
+
+config DE620
+	tristate "D-Link DE620 pocket adapter support"
+	depends on NET_POCKET && PARPORT
+	---help---
+	  This is a network (Ethernet) device which attaches to your parallel
+	  port. Read <file:Documentation/networking/DLINK.txt> as well as the
+	  Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, if you want to use
+	  this. It is possible to have several devices share a single parallel
+	  port and it is safe to compile the corresponding drivers into the
+	  kernel.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called de620.
+
+config SGISEEQ
+	tristate "SGI Seeq ethernet controller support"
+	depends on SGI_HAS_SEEQ
+	help
+	  Say Y here if you have an Seeq based Ethernet network card. This is
+	  used in many Silicon Graphics machines.
+
+config DECLANCE
+	tristate "DEC LANCE ethernet controller support"
+	depends on MACH_DECSTATION
+	select CRC32
+	help
+	  This driver is for the series of Ethernet controllers produced by
+	  DEC (now Compaq) based on the AMD Lance chipset, including the
+	  DEPCA series.  (This chipset is better known via the NE2100 cards.)
+
+config 68360_ENET
+	bool "Motorola 68360 ethernet controller"
+	depends on M68360
+	help
+	  Say Y here if you want to use the built-in ethernet controller of
+	  the Motorola 68360 processor.
+
+config FEC
+	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
+	depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
+		MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5
+	select PHYLIB
+	help
+	  Say Y here if you want to use the built-in 10/100 Fast ethernet
+	  controller on some Motorola ColdFire and Freescale i.MX processors.
+
+config FEC2
+	bool "Second FEC ethernet controller (on some ColdFire CPUs)"
+	depends on FEC
+	help
+	  Say Y here if you want to use the second built-in 10/100 Fast
+	  ethernet controller on some Motorola ColdFire processors.
+
+config FEC_MPC52xx
+	tristate "MPC52xx FEC driver"
+	depends on PPC_MPC52xx && PPC_BESTCOMM
+	select CRC32
+	select PHYLIB
+	select PPC_BESTCOMM_FEC
+	---help---
+	  This option enables support for the MPC5200's on-chip
+	  Fast Ethernet Controller
+	  If compiled as module, it will be called fec_mpc52xx.
+
+config FEC_MPC52xx_MDIO
+	bool "MPC52xx FEC MDIO bus driver"
+	depends on FEC_MPC52xx
+	default y
+	---help---
+	  The MPC5200's FEC can connect to the Ethernet either with
+	  an external MII PHY chip or 10 Mbps 7-wire interface
+	  (Motorola? industry standard).
+	  If your board uses an external PHY connected to FEC, enable this.
+	  If not sure, enable.
+	  If compiled as module, it will be called fec_mpc52xx_phy.
+
+config NE_H8300
+	tristate "NE2000 compatible support for H8/300"
+	depends on H8300
+	help
+	  Say Y here if you want to use the NE2000 compatible
+	  controller on the Renesas H8/300 processor.
+
+config ATL2
+	tristate "Atheros L2 Fast Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	help
+	  This driver supports the Atheros L2 fast ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl2.
+
+config XILINX_EMACLITE
+	tristate "Xilinx 10/100 Ethernet Lite support"
+	depends on PPC32 || MICROBLAZE
+	select PHYLIB
+	help
+	  This driver supports the 10/100 Ethernet Lite from Xilinx.
+
+config BCM63XX_ENET
+	tristate "Broadcom 63xx internal mac support"
+	depends on BCM63XX
+	select MII
+	select PHYLIB
+	help
+	  This driver supports the ethernet MACs in the Broadcom 63xx
+	  MIPS chipset family (BCM63XX).
+
+source "drivers/net/fs_enet/Kconfig"
+
+source "drivers/net/octeon/Kconfig"
+
+endif # NET_ETHERNET
+
+#
+#	Gigabit Ethernet
+#
+
+menuconfig NETDEV_1000
+	bool "Ethernet (1000 Mbit)"
+	depends on !UML
+	default y
+	---help---
+	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
+	  type of Local Area Network (LAN) in universities and companies.
+
+	  Say Y here to get to see options for Gigabit Ethernet drivers.
+	  This option alone does not add any kernel code.
+	  Note that drivers supporting both 100 and 1000 MBit may be listed
+	  under "Ethernet (10 or 100MBit)" instead.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
+
+if NETDEV_1000
+
+config ACENIC
+	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
+	depends on PCI
+	---help---
+	  Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
+	  GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
+	  adapter. The driver allows for using the Jumbo Frame option (9000
+	  bytes/frame) however it requires that your switches can handle this
+	  as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
+	  line.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acenic.
+
+config ACENIC_OMIT_TIGON_I
+	bool "Omit support for old Tigon I based AceNICs"
+	depends on ACENIC
+	help
+	  Say Y here if you only have Tigon II based AceNICs and want to leave
+	  out support for the older Tigon I based cards which are no longer
+	  being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
+	  version)).  This will reduce the size of the driver object by
+	  app. 100KB.  If you are not sure whether your card is a Tigon I or a
+	  Tigon II, say N here.
+
+	  The safe and default value for this is N.
+
+config DL2K
+	tristate "DL2000/TC902x-based Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	help
+	  This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+	  which includes
+	  D-Link DGE-550T Gigabit Ethernet Adapter.
+	  D-Link DL2000-based Gigabit Ethernet Adapter.
+	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dl2k.
+
+config E1000
+	tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+	  adapters.  For more information on how to identify your adapter, go 
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in 
+	  <file:Documentation/networking/e1000.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called e1000.
+
+config E1000E
+	tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
+	depends on PCI && (!SPARC32 || BROKEN)
+	---help---
+	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
+	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
+	  use the regular e1000 driver For more information on how to
+	  identify your adapter, go to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called e1000e.
+
+config IP1000
+	tristate "IP1000 Gigabit Ethernet support"
+	depends on PCI && EXPERIMENTAL
+	select MII
+	---help---
+	  This driver supports IP1000 gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ipg.  This is recommended.
+
+config IGB
+       tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
+       depends on PCI
+       ---help---
+         This driver supports Intel(R) 82575/82576 gigabit ethernet family of
+         adapters.  For more information on how to identify your adapter, go
+         to the Adapter & Driver ID Guide at:
+
+         <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+         For general information and support, go to the Intel support
+         website at:
+
+         <http://support.intel.com>
+
+         More specific information on configuring the driver is in
+         <file:Documentation/networking/e1000.txt>.
+
+         To compile this driver as a module, choose M here. The module
+         will be called igb.
+
+config IGB_DCA
+	bool "Direct Cache Access (DCA) Support"
+	default y
+	depends on IGB && DCA && !(IGB=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
+
+config IGBVF
+       tristate "Intel(R) 82576 Virtual Function Ethernet support"
+       depends on PCI
+       ---help---
+         This driver supports Intel(R) 82576 virtual functions.  For more
+         information on how to identify your adapter, go to the Adapter &
+         Driver ID Guide at:
+
+         <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+         For general information and support, go to the Intel support
+         website at:
+
+         <http://support.intel.com>
+
+         More specific information on configuring the driver is in
+         <file:Documentation/networking/e1000.txt>.
+
+         To compile this driver as a module, choose M here. The module
+         will be called igbvf.
+
+source "drivers/net/ixp2000/Kconfig"
+
+config MYRI_SBUS
+	tristate "MyriCOM Gigabit Ethernet support"
+	depends on SBUS
+	help
+	  This driver supports MyriCOM Sbus gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called myri_sbus.  This is recommended.
+
+config NS83820
+	tristate "National Semiconductor DP83820 support"
+	depends on PCI
+	help
+	  This is a driver for the National Semiconductor DP83820 series
+	  of gigabit ethernet MACs.  Cards using this chipset include
+	  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
+	  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
+	  zero copy.
+
+config HAMACHI
+	tristate "Packet Engines Hamachi GNIC-II support"
+	depends on PCI
+	select MII
+	help
+	  If you have a Gigabit Ethernet card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module will be
+	  called hamachi.
+
+config YELLOWFIN
+	tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	---help---
+	  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
+	  adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
+	  used by the Beowulf Linux cluster project.  See
+	  <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
+	  information about this driver in particular and Beowulf in general.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called yellowfin.  This is recommended.
+
+config R8169
+	tristate "Realtek 8169 gigabit ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called r8169.  This is recommended.
+
+config R8169_VLAN
+	bool "VLAN support"
+	depends on R8169 && VLAN_8021Q
+	---help---
+	  Say Y here for the r8169 driver to support the functions required
+	  by the kernel 802.1Q code.
+
+	  If in doubt, say Y.
+
+config SB1250_MAC
+	tristate "SB1250 Gigabit Ethernet support"
+	depends on SIBYTE_SB1xxx_SOC
+	select PHYLIB
+	---help---
+	  This driver supports Gigabit Ethernet interfaces based on the
+	  Broadcom SiByte family of System-On-a-Chip parts.  They include
+	  the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
+	  and BCM1480 chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sb1250-mac.
+
+config SIS190
+	tristate "SiS190/SiS191 gigabit ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
+	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
+	  appear in lan on motherboard designs which are based on SiS 965
+	  and SiS 966 south bridge.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis190.  This is recommended.
+
+config SKGE
+	tristate "New SysKonnect GigaEthernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+	  and related Gigabit Ethernet adapters. It is a new smaller driver
+	  with better performance and more complete ethtool support.
+
+	  It does not support the link failover and network management 
+	  features that "portable" vendor supplied sk98lin driver does.
+
+	  This driver supports adapters based on the original Yukon chipset:
+	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
+	  Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
+
+	  It does not support the newer Yukon2 chipset: a separate driver,
+	  sky2, is provided for Yukon2-based adapters.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called skge.  This is recommended.
+
+config SKGE_DEBUG
+       bool "Debugging interface"
+       depends on SKGE && DEBUG_FS
+       help
+	 This option adds the ability to dump driver state for debugging.
+	 The file /sys/kernel/debug/skge/ethX displays the state of the internal
+	 transmit and receive rings.
+
+	 If unsure, say N.
+
+config SKY2
+	tristate "SysKonnect Yukon2 support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver supports Gigabit Ethernet adapters based on the
+	  Marvell Yukon 2 chipset:
+	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
+	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
+
+	  There is companion driver for the older Marvell Yukon and
+	  Genesis based adapters: skge.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sky2.  This is recommended.
+
+config SKY2_DEBUG
+       bool "Debugging interface"
+       depends on SKY2 && DEBUG_FS
+       help
+	 This option adds the ability to dump driver state for debugging.
+	 The file /sys/kernel/debug/sky2/ethX displays the state of the internal
+	 transmit and receive rings.
+
+	 If unsure, say N.
+
+config VIA_VELOCITY
+	tristate "VIA Velocity support"
+	depends on PCI
+	select CRC32
+	select CRC_CCITT
+	select MII
+	help
+	  If you have a VIA "Velocity" based network card say Y here.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called via-velocity.
+
+config TIGON3
+	tristate "Broadcom Tigon3 support"
+	depends on PCI
+	select PHYLIB
+	help
+	  This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tg3.  This is recommended.
+
+config BNX2
+	tristate "Broadcom NetXtremeII support"
+	depends on PCI
+	select CRC32
+	select FW_LOADER
+	help
+	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called bnx2.  This is recommended.
+
+config CNIC
+	tristate "Broadcom CNIC support"
+	depends on PCI
+	select BNX2
+	select UIO
+	help
+	  This driver supports offload features of Broadcom NetXtremeII
+	  gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cnic.  This is recommended.
+
+config SPIDER_NET
+	tristate "Spider Gigabit Ethernet driver"
+	depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
+	select FW_LOADER
+	help
+	  This driver supports the Gigabit Ethernet chips present on the
+	  Cell Processor-Based Blades from IBM.
+
+config TSI108_ETH
+	   tristate "Tundra TSI108 gigabit Ethernet support"
+	   depends on TSI108_BRIDGE
+	   help
+	     This driver supports Tundra TSI108 gigabit Ethernet ports.
+	     To compile this driver as a module, choose M here: the module
+	     will be called tsi108_eth.
+
+config GELIC_NET
+	tristate "PS3 Gigabit Ethernet driver"
+	depends on PPC_PS3
+	select PS3_SYS_MANAGER
+	help
+	  This driver supports the network device on the PS3 game
+	  console.  This driver has built-in support for Ethernet.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ps3_gelic.
+
+config GELIC_WIRELESS
+	bool "PS3 Wireless support"
+	depends on WLAN
+	depends on GELIC_NET
+	select WIRELESS_EXT
+	help
+	  This option adds the support for the wireless feature of PS3.
+	  If you have the wireless-less model of PS3 or have no plan to
+	  use wireless feature, disabling this option saves memory.  As
+	  the driver automatically distinguishes the models, you can
+	  safely enable this option even if you have a wireless-less model.
+
+config FSL_PQ_MDIO
+	tristate "Freescale PQ MDIO"
+	depends on FSL_SOC
+	select PHYLIB
+	help
+	  This driver supports the MDIO bus used by the gianfar and UCC drivers.
+
+config GIANFAR
+	tristate "Gianfar Ethernet"
+	depends on FSL_SOC
+	select FSL_PQ_MDIO
+	select PHYLIB
+	select CRC32
+	help
+	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
+	  and MPC86xx family of chips, and the FEC on the 8540.
+
+config UCC_GETH
+	tristate "Freescale QE Gigabit Ethernet"
+	depends on QUICC_ENGINE
+	select FSL_PQ_MDIO
+	select PHYLIB
+	help
+	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
+	  which is available on some Freescale SOCs.
+
+config UGETH_TX_ON_DEMAND
+	bool "Transmit on Demand support"
+	depends on UCC_GETH
+
+config MV643XX_ETH
+	tristate "Marvell Discovery (643XX) and Orion ethernet support"
+	depends on MV64X60 || PPC32 || PLAT_ORION
+	select INET_LRO
+	select PHYLIB
+	help
+	  This driver supports the gigabit ethernet MACs in the
+	  Marvell Discovery PPC/MIPS chipset family (MV643XX) and
+	  in the Marvell Orion ARM SoC family.
+
+	  Some boards that use the Discovery chipset are the Momenco
+	  Ocelot C and Jaguar ATX and Pegasos II.
+
+config XILINX_LL_TEMAC
+	tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
+	depends on PPC || MICROBLAZE
+	select PHYLIB
+	help
+	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
+	  core used in Xilinx Spartan and Virtex FPGAs
+
+config QLA3XXX
+	tristate "QLogic QLA3XXX Network Driver Support"
+	depends on PCI
+	help
+	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qla3xxx.
+
+config ATL1
+	tristate "Atheros/Attansic L1 Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	help
+	  This driver supports the Atheros/Attansic L1 gigabit ethernet
+	  adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1.
+
+config ATL1E
+	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	help
+	  This driver supports the Atheros L1E gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1e.
+
+config ATL1C
+	tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	select CRC32
+	select MII
+	help
+	  This driver supports the Atheros L1C gigabit ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl1c.
+
+config JME
+	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This driver supports the PCI-Express gigabit ethernet adapters
+	  based on JMicron JMC250 chipset.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called jme.
+
+config S6GMAC
+	tristate "S6105 GMAC ethernet support"
+	depends on XTENSA_VARIANT_S6000
+	select PHYLIB
+	help
+	  This driver supports the on chip ethernet device on the
+	  S6105 xtensa processor.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called s6gmac.
+
+source "drivers/net/stmmac/Kconfig"
+
+endif # NETDEV_1000
+
+#
+#	10 Gigabit Ethernet
+#
+
+menuconfig NETDEV_10000
+	bool "Ethernet (10000 Mbit)"
+	depends on !UML
+	default y
+	---help---
+	  Say Y here to get to see options for 10 Gigabit Ethernet drivers.
+	  This option alone does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
+
+if NETDEV_10000
+
+config MDIO
+	tristate
+
+config CHELSIO_T1
+        tristate "Chelsio 10Gb Ethernet support"
+        depends on PCI
+	select CRC32
+	select MDIO
+        help
+          This driver supports Chelsio gigabit and 10-gigabit
+          Ethernet cards. More information about adapter features and
+	  performance tuning is in <file:Documentation/networking/cxgb.txt>.
+
+          For general information about Chelsio and our products, visit
+          our website at <http://www.chelsio.com>.
+
+          For customer support, please visit our customer support page at
+          <http://www.chelsio.com/support.htm>.
+
+          Please send feedback to <linux-bugs@chelsio.com>.
+
+          To compile this driver as a module, choose M here: the module
+          will be called cxgb.
+
+config CHELSIO_T1_1G
+        bool "Chelsio gigabit Ethernet support"
+        depends on CHELSIO_T1
+        help
+          Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
+          are using only 10G cards say 'N' here.
+
+config CHELSIO_T3_DEPENDS
+	tristate
+	depends on PCI && INET
+	default y
+
+config CHELSIO_T3
+	tristate "Chelsio Communications T3 10Gb Ethernet support"
+	depends on CHELSIO_T3_DEPENDS
+	select FW_LOADER
+	select MDIO
+	help
+	  This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+	  adapters.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.htm>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called cxgb3.
+
+config CHELSIO_T4_DEPENDS
+	tristate
+	depends on PCI && INET
+	default y
+
+config CHELSIO_T4
+	tristate "Chelsio Communications T4 Ethernet support"
+	depends on CHELSIO_T4_DEPENDS
+	select FW_LOADER
+	select MDIO
+	help
+	  This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
+	  adapters.
+
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
+
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.htm>.
+
+	  Please send feedback to <linux-bugs@chelsio.com>.
+
+	  To compile this driver as a module choose M here; the module
+	  will be called cxgb4.
+
+config EHEA
+	tristate "eHEA Ethernet support"
+	depends on IBMEBUS && INET && SPARSEMEM
+	select INET_LRO
+	---help---
+	  This driver supports the IBM pSeries eHEA ethernet adapter.
+
+	  To compile the driver as a module, choose M here. The module
+	  will be called ehea.
+
+config ENIC
+	tristate "Cisco VIC Ethernet NIC Support"
+	depends on PCI && INET
+	select INET_LRO
+	help
+	  This enables the support for the Cisco VIC Ethernet card.
+
+config IXGBE
+	tristate "Intel(R) 10GbE PCI Express adapters support"
+	depends on PCI && INET
+	select MDIO
+	---help---
+	  This driver supports Intel(R) 10GbE PCI Express family of
+	  adapters.  For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ixgbe.
+
+config IXGBE_DCA
+	bool "Direct Cache Access (DCA) Support"
+	default y
+	depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
+
+config IXGBE_DCB
+	bool "Data Center Bridging (DCB) Support"
+	default n
+	depends on IXGBE && DCB
+	---help---
+	  Say Y here if you want to use Data Center Bridging (DCB) in the
+	  driver.
+
+	  If unsure, say N.
+
+config IXGBEVF
+       tristate "Intel(R) 82599 Virtual Function Ethernet support"
+       depends on PCI_MSI
+       ---help---
+         This driver supports Intel(R) 82599 virtual functions.  For more
+         information on how to identify your adapter, go to the Adapter &
+         Driver ID Guide at:
+
+         <http://support.intel.com/support/network/sb/CS-008441.htm>
+
+         For general information and support, go to the Intel support
+         website at:
+
+         <http://support.intel.com>
+
+         More specific information on configuring the driver is in
+         <file:Documentation/networking/ixgbevf.txt>.
+
+         To compile this driver as a module, choose M here. The module
+         will be called ixgbevf.  MSI-X interrupt support is required
+         for this driver to work correctly.
+
+config IXGB
+	tristate "Intel(R) PRO/10GbE support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) PRO/10GbE family of adapters for
+	  PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
+	  instead. For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
+
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+	  For general information and support, go to the Intel support
+	  website at:
+
+	  <http://support.intel.com>
+
+	  More specific information on configuring the driver is in 
+	  <file:Documentation/networking/ixgb.txt>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ixgb.
+
+config S2IO
+	tristate "S2IO 10Gbe XFrame NIC"
+	depends on PCI
+	---help---
+	  This driver supports the 10Gbe XFrame NIC of S2IO. 
+	  More specific information on configuring the driver is in 
+	  <file:Documentation/networking/s2io.txt>.
+
+config VXGE
+	tristate "Neterion X3100 Series 10GbE PCIe Server Adapter"
+	depends on PCI && INET
+	---help---
+	  This driver supports Neterion Inc's X3100 Series 10 GbE PCIe
+	  I/O Virtualized Server Adapter.
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/vxge.txt>.
+
+config VXGE_DEBUG_TRACE_ALL
+	bool "Enabling All Debug trace statments in driver"
+	default n
+	depends on VXGE
+	---help---
+	  Say Y here if you want to enabling all the debug trace statements in
+	  driver. By  default only few debug trace statements are enabled.
+
+config MYRI10GE
+	tristate "Myricom Myri-10G Ethernet support"
+	depends on PCI && INET
+	select FW_LOADER
+	select CRC32
+	select INET_LRO
+	---help---
+	  This driver supports Myricom Myri-10G Dual Protocol interface in
+	  Ethernet mode. If the eeprom on your board is not recent enough,
+	  you will need a newer firmware image.
+	  You may get this image or more information, at:
+
+	  <http://www.myri.com/scs/download-Myri10GE.html>
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called myri10ge.
+
+config MYRI10GE_DCA
+	bool "Direct Cache Access (DCA) Support"
+	default y
+	depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
+	---help---
+	  Say Y here if you want to use Direct Cache Access (DCA) in the
+	  driver.  DCA is a method for warming the CPU cache before data
+	  is used, with the intent of lessening the impact of cache misses.
+
+config NETXEN_NIC
+	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
+	depends on PCI
+	select FW_LOADER
+	help
+	  This enables the support for NetXen's Gigabit Ethernet card.
+
+config NIU
+	tristate "Sun Neptune 10Gbit Ethernet support"
+	depends on PCI
+	select CRC32
+	help
+	  This enables support for cards based upon Sun's
+	  Neptune chipset.
+
+config PASEMI_MAC
+	tristate "PA Semi 1/10Gbit MAC"
+	depends on PPC_PASEMI && PCI
+	select PHYLIB
+	select INET_LRO
+	help
+	  This driver supports the on-chip 1/10Gbit Ethernet controller on
+	  PA Semi's PWRficient line of chips.
+
+config MLX4_EN
+	tristate "Mellanox Technologies 10Gbit Ethernet support"
+	depends on PCI && INET
+	select MLX4_CORE
+	select INET_LRO
+	help
+	  This driver supports Mellanox Technologies ConnectX Ethernet
+	  devices.
+
+config MLX4_CORE
+	tristate
+	depends on PCI
+	default n
+
+config MLX4_DEBUG
+	bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
+	depends on MLX4_CORE
+	default y
+	---help---
+	  This option causes debugging code to be compiled into the
+	  mlx4_core driver.  The output can be turned on via the
+	  debug_level module parameter (which can also be set after
+	  the driver is loaded through sysfs).
+
+config TEHUTI
+	tristate "Tehuti Networks 10G Ethernet"
+	depends on PCI
+	help
+	  Tehuti Networks 10G Ethernet NIC
+
+config BNX2X
+	tristate "Broadcom NetXtremeII 10Gb support"
+	depends on PCI
+	select FW_LOADER
+	select ZLIB_INFLATE
+	select LIBCRC32C
+	select MDIO
+	help
+	  This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
+	  To compile this driver as a module, choose M here: the module
+	  will be called bnx2x.  This is recommended.
+
+config QLCNIC
+	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
+	depends on PCI
+	select FW_LOADER
+	help
+	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
+	  devices.
+
+config QLGE
+	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+	depends on PCI
+	help
+	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qlge.
+
+source "drivers/net/sfc/Kconfig"
+
+source "drivers/net/benet/Kconfig"
+
+endif # NETDEV_10000
+
+source "drivers/net/tokenring/Kconfig"
+
+source "drivers/net/wireless/Kconfig"
+
+source "drivers/net/wimax/Kconfig"
+
+source "drivers/net/usb/Kconfig"
+
+source "drivers/net/pcmcia/Kconfig"
+
+source "drivers/net/wan/Kconfig"
+
+source "drivers/atm/Kconfig"
+
+source "drivers/ieee802154/Kconfig"
+
+source "drivers/s390/net/Kconfig"
+
+source "drivers/net/caif/Kconfig"
+
+config XEN_NETDEV_FRONTEND
+	tristate "Xen network device frontend driver"
+	depends on XEN
+	default y
+	help
+	  The network device frontend driver allows the kernel to
+	  access network devices exported exported by a virtual
+	  machine containing a physical network device driver. The
+	  frontend driver is intended for unprivileged guest domains;
+	  if you are compiling a kernel for a Xen guest, you almost
+	  certainly want to enable this.
+
+config ISERIES_VETH
+	tristate "iSeries Virtual Ethernet driver support"
+	depends on PPC_ISERIES
+
+config RIONET
+	tristate "RapidIO Ethernet over messaging driver support"
+	depends on RAPIDIO
+
+config RIONET_TX_SIZE
+	int "Number of outbound queue entries"
+	depends on RIONET
+	default "128"
+
+config RIONET_RX_SIZE
+	int "Number of inbound queue entries"
+	depends on RIONET
+	default "128"
+
+config FDDI
+	tristate "FDDI driver support"
+	depends on (PCI || EISA || TC)
+	help
+	  Fiber Distributed Data Interface is a high speed local area network
+	  design; essentially a replacement for high speed Ethernet. FDDI can
+	  run over copper or fiber. If you are connected to such a network and
+	  want a driver for the FDDI card in your computer, say Y here (and
+	  then also Y to the driver for your FDDI card, below). Most people
+	  will say N.
+
+config DEFXX
+	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+	depends on FDDI && (PCI || EISA || TC)
+	---help---
+	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
+	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+	  to a local FDDI network.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called defxx.  If unsure, say N.
+
+config DEFXX_MMIO
+	bool
+	prompt "Use MMIO instead of PIO" if PCI || EISA
+	depends on DEFXX
+	default n if PCI || EISA
+	default y
+	---help---
+	  This instructs the driver to use EISA or PCI memory-mapped I/O
+	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
+	  Enabling this gives an improvement in processing time in parts
+	  of the driver, but it may cause problems with EISA (DEFEA)
+	  adapters.  TURBOchannel does not have the concept of I/O ports,
+	  so MMIO is always used for these (DEFTA) adapters.
+
+	  If unsure, say N.
+
+config SKFP
+	tristate "SysKonnect FDDI PCI support"
+	depends on FDDI && PCI
+	select BITREVERSE
+	---help---
+	  Say Y here if you have a SysKonnect FDDI PCI adapter.
+	  The following adapters are supported by this driver:
+	  - SK-5521 (SK-NET FDDI-UP)
+	  - SK-5522 (SK-NET FDDI-UP DAS)
+	  - SK-5541 (SK-NET FDDI-FP)
+	  - SK-5543 (SK-NET FDDI-LP)
+	  - SK-5544 (SK-NET FDDI-LP DAS)
+	  - SK-5821 (SK-NET FDDI-UP64)
+	  - SK-5822 (SK-NET FDDI-UP64 DAS)
+	  - SK-5841 (SK-NET FDDI-FP64)
+	  - SK-5843 (SK-NET FDDI-LP64)
+	  - SK-5844 (SK-NET FDDI-LP64 DAS)
+	  - Netelligent 100 FDDI DAS Fibre SC
+	  - Netelligent 100 FDDI SAS Fibre SC
+	  - Netelligent 100 FDDI DAS UTP
+	  - Netelligent 100 FDDI SAS UTP
+	  - Netelligent 100 FDDI SAS Fibre MIC
+
+	  Read <file:Documentation/networking/skfp.txt> for information about
+	  the driver.
+
+	  Questions concerning this driver can be addressed to:
+	  <linux@syskonnect.de>
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called skfp.  This is recommended.
+
+config HIPPI
+	bool "HIPPI driver support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && INET && PCI
+	help
+	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
+	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
+	  can run over copper (25m) or fiber (300m on multi-mode or 10km on
+	  single-mode). HIPPI networks are commonly used for clusters and to
+	  connect to super computers. If you are connected to a HIPPI network
+	  and have a HIPPI network card in your computer that you want to use
+	  under Linux, say Y here (you must also remember to enable the driver
+	  for your HIPPI card below). Most people will say N here.
+
+config ROADRUNNER
+	tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
+	depends on HIPPI && PCI
+	help
+	  Say Y here if this is your PCI HIPPI network card.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called rrunner.  If unsure, say N.
+
+config ROADRUNNER_LARGE_RINGS
+	bool "Use large TX/RX rings (EXPERIMENTAL)"
+	depends on ROADRUNNER
+	help
+	  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
+	  of additional memory to allow for fastest operation, both for
+	  transmitting and receiving. This memory cannot be used by any other
+	  kernel code or by user space programs. Say Y here only if you have
+	  the memory.
+
+config PLIP
+	tristate "PLIP (parallel port) support"
+	depends on PARPORT
+	---help---
+	  PLIP (Parallel Line Internet Protocol) is used to create a
+	  reasonably fast mini network consisting of two (or, rarely, more)
+	  local machines.  A PLIP link from a Linux box is a popular means to
+	  install a Linux distribution on a machine which doesn't have a
+	  CD-ROM drive (a minimal system has to be transferred with floppies
+	  first). The kernels on both machines need to have this PLIP option
+	  enabled for this to work.
+
+	  The PLIP driver has two modes, mode 0 and mode 1.  The parallel
+	  ports (the connectors at the computers with 25 holes) are connected
+	  with "null printer" or "Turbo Laplink" cables which can transmit 4
+	  bits at a time (mode 0) or with special PLIP cables, to be used on
+	  bidirectional parallel ports only, which can transmit 8 bits at a
+	  time (mode 1); you can find the wiring of these cables in
+	  <file:Documentation/networking/PLIP.txt>.  The cables can be up to
+	  15m long.  Mode 0 works also if one of the machines runs DOS/Windows
+	  and has some PLIP software installed, e.g. the Crynwr PLIP packet
+	  driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
+	  and winsock or NCSA's telnet.
+
+	  If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
+	  as the NET-3-HOWTO, both available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that the PLIP
+	  protocol has been changed and this PLIP driver won't work together
+	  with the PLIP support in Linux versions 1.0.x.  This option enlarges
+	  your kernel by about 8 KB.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called plip. If unsure, say Y or M, in case you buy
+	  a laptop later.
+
+config PPP
+	tristate "PPP (point-to-point protocol) support"
+	select SLHC
+	---help---
+	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
+	  the same purpose: sending Internet traffic over telephone (and other
+	  serial) lines.  Ask your access provider if they support it, because
+	  otherwise you can't use it; most Internet access providers these
+	  days support PPP rather than SLIP.
+
+	  To use PPP, you need an additional program called pppd as described
+	  in the PPP-HOWTO, available at
+	  <http://www.tldp.org/docs.html#howto>.  Make sure that you have
+	  the version of pppd recommended in <file:Documentation/Changes>.
+	  The PPP option enlarges your kernel by about 16 KB.
+
+	  There are actually two versions of PPP: the traditional PPP for
+	  asynchronous lines, such as regular analog phone lines, and
+	  synchronous PPP which can be used over digital ISDN lines for
+	  example.  If you want to use PPP over phone lines or other
+	  asynchronous serial lines, you need to say Y (or M) here and also to
+	  the next option, "PPP support for async serial ports".  For PPP over
+	  synchronous lines, you should say Y (or M) here and to "Support
+	  synchronous PPP", below.
+
+	  If you said Y to "Version information on all symbols" above, then
+	  you cannot compile the PPP driver into the kernel; you can then only
+	  compile it as a module. To compile this driver as a module, choose M
+	  here. The module will be called ppp_generic.
+
+config PPP_MULTILINK
+	bool "PPP multilink support (EXPERIMENTAL)"
+	depends on PPP && EXPERIMENTAL
+	help
+	  PPP multilink is a protocol (defined in RFC 1990) which allows you
+	  to combine several (logical or physical) lines into one logical PPP
+	  connection, so that you can utilize your full bandwidth.
+
+	  This has to be supported at the other end as well and you need a
+	  version of the pppd daemon which understands the multilink protocol.
+
+	  If unsure, say N.
+
+config PPP_FILTER
+	bool "PPP filtering"
+	depends on PPP
+	help
+	  Say Y here if you want to be able to filter the packets passing over
+	  PPP interfaces.  This allows you to control which packets count as
+	  activity (i.e. which packets will reset the idle timer or bring up
+	  a demand-dialed link) and which packets are to be dropped entirely.
+	  You need to say Y here if you wish to use the pass-filter and
+	  active-filter options to pppd.
+
+	  If unsure, say N.
+
+config PPP_ASYNC
+	tristate "PPP support for async serial ports"
+	depends on PPP
+	select CRC_CCITT
+	---help---
+	  Say Y (or M) here if you want to be able to use PPP over standard
+	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use
+	  a modem (not a synchronous or ISDN modem) to contact your ISP, you
+	  need this option.
+
+	  To compile this driver as a module, choose M here.
+
+	  If unsure, say Y.
+
+config PPP_SYNC_TTY
+	tristate "PPP support for sync tty ports"
+	depends on PPP
+	help
+	  Say Y (or M) here if you want to be able to use PPP over synchronous
+	  (HDLC) tty devices, such as the SyncLink adapter. These devices
+	  are often used for high-speed leased lines like T1/E1.
+
+	  To compile this driver as a module, choose M here.
+
+config PPP_DEFLATE
+	tristate "PPP Deflate compression"
+	depends on PPP
+	select ZLIB_INFLATE
+	select ZLIB_DEFLATE
+	---help---
+	  Support for the Deflate compression method for PPP, which uses the
+	  Deflate algorithm (the same algorithm that gzip uses) to compress
+	  each PPP packet before it is sent over the wire.  The machine at the
+	  other end of the PPP link (usually your ISP) has to support the
+	  Deflate compression method as well for this to be useful.  Even if
+	  they don't support it, it is safe to say Y here.
+
+	  To compile this driver as a module, choose M here.
+
+config PPP_BSDCOMP
+	tristate "PPP BSD-Compress compression"
+	depends on PPP
+	---help---
+	  Support for the BSD-Compress compression method for PPP, which uses
+	  the LZW compression method to compress each PPP packet before it is
+	  sent over the wire. The machine at the other end of the PPP link
+	  (usually your ISP) has to support the BSD-Compress compression
+	  method as well for this to be useful. Even if they don't support it,
+	  it is safe to say Y here.
+
+	  The PPP Deflate compression method ("PPP Deflate compression",
+	  above) is preferable to BSD-Compress, because it compresses better
+	  and is patent-free.
+
+	  Note that the BSD compression code will always be compiled as a
+	  module; it is called bsd_comp and will show up in the directory
+	  modules once you have said "make modules". If unsure, say N.
+
+config PPP_MPPE
+       tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
+       depends on PPP && EXPERIMENTAL
+       select CRYPTO
+       select CRYPTO_SHA1
+       select CRYPTO_ARC4
+       select CRYPTO_ECB
+       ---help---
+         Support for the MPPE Encryption protocol, as employed by the
+	 Microsoft Point-to-Point Tunneling Protocol.
+
+	 See http://pptpclient.sourceforge.net/ for information on
+	 configuring PPTP clients and servers to utilize this method.
+
+config PPPOE
+	tristate "PPP over Ethernet (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && PPP
+	help
+	  Support for PPP over Ethernet.
+
+	  This driver requires the latest version of pppd from the CVS
+	  repository at cvs.samba.org.  Alternatively, see the 
+	  RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
+	  which contains instruction on how to use this driver (under 
+	  the heading "Kernel mode PPPoE").
+
+config PPPOATM
+	tristate "PPP over ATM"
+	depends on ATM && PPP
+	help
+	  Support PPP (Point to Point Protocol) encapsulated in ATM frames.
+	  This implementation does not yet comply with section 8 of RFC2364,
+	  which can lead to bad results if the ATM peer loses state and
+	  changes its encapsulation unilaterally.
+
+config PPPOL2TP
+	tristate "PPP over L2TP (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && L2TP && PPP
+	help
+	  Support for PPP-over-L2TP socket family. L2TP is a protocol
+	  used by ISPs and enterprises to tunnel PPP traffic over UDP
+	  tunnels. L2TP is replacing PPTP for VPN uses.
+
+config SLIP
+	tristate "SLIP (serial line) support"
+	---help---
+	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
+	  connect to your Internet service provider or to connect to some
+	  other local Unix box or if you want to configure your Linux box as a
+	  Slip/CSlip server for other people to dial in. SLIP (Serial Line
+	  Internet Protocol) is a protocol used to send Internet traffic over
+	  serial connections such as telephone lines or null modem cables;
+	  nowadays, the protocol PPP is more commonly used for this same
+	  purpose.
+
+	  Normally, your access provider has to support SLIP in order for you
+	  to be able to use it, but there is now a SLIP emulator called SLiRP
+	  around (available from
+	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+	  allows you to use SLIP over a regular dial up shell connection. If
+	  you plan to use SLiRP, make sure to say Y to CSLIP, below. The
+	  NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, explains how to
+	  configure SLIP. Note that you don't need this option if you just
+	  want to run term (term is a program which gives you almost full
+	  Internet connectivity if you have a regular dial up shell account on
+	  some Internet connected Unix computer. Read
+	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
+	  support will enlarge your kernel by about 4 KB. If unsure, say N.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called slip.
+
+config SLIP_COMPRESSED
+	bool "CSLIP compressed headers"
+	depends on SLIP
+	select SLHC
+	---help---
+	  This protocol is faster than SLIP because it uses compression on the
+	  TCP/IP headers (not on the data itself), but it has to be supported
+	  on both ends. Ask your access provider if you are not sure and
+	  answer Y, just in case. You will still be able to use plain SLIP. If
+	  you plan to use SLiRP, the SLIP emulator (available from
+	  <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
+	  allows you to use SLIP over a regular dial up shell connection, you
+	  definitely want to say Y here. The NET-3-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, explains how to configure
+	  CSLIP. This won't enlarge your kernel.
+
+config SLHC
+	tristate
+	help
+	  This option enables Van Jacobsen serial line header compression
+	  routines.
+
+config SLIP_SMART
+	bool "Keepalive and linefill"
+	depends on SLIP
+	help
+	  Adds additional capabilities to the SLIP driver to support the
+	  RELCOM line fill and keepalive monitoring. Ideal on poor quality
+	  analogue lines.
+
+config SLIP_MODE_SLIP6
+	bool "Six bit SLIP encapsulation"
+	depends on SLIP
+	help
+	  Just occasionally you may need to run IP over hostile serial
+	  networks that don't pass all control characters or are only seven
+	  bit. Saying Y here adds an extra mode you can use with SLIP:
+	  "slip6". In this mode, SLIP will only send normal ASCII symbols over
+	  the serial device. Naturally, this has to be supported at the other
+	  end of the link as well. It's good enough, for example, to run IP
+	  over the async ports of a Camtec JNT Pad. If unsure, say N.
+
+config NET_FC
+	bool "Fibre Channel driver support"
+	depends on SCSI && PCI
+	help
+	  Fibre Channel is a high speed serial protocol mainly used to connect
+	  large storage devices to the computer; it is compatible with and
+	  intended to replace SCSI.
+
+	  If you intend to use Fibre Channel, you need to have a Fibre channel
+	  adaptor card in your computer; say Y here and to the driver for your
+	  adaptor below. You also should have said Y to "SCSI support" and
+	  "SCSI generic support".
+
+config NETCONSOLE
+	tristate "Network console logging support"
+	---help---
+	If you want to log kernel messages over the network, enable this.
+	See <file:Documentation/networking/netconsole.txt> for details.
+
+config NETCONSOLE_DYNAMIC
+	bool "Dynamic reconfiguration of logging targets"
+	depends on NETCONSOLE && SYSFS
+	select CONFIGFS_FS
+	help
+	  This option enables the ability to dynamically reconfigure target
+	  parameters (interface, IP addresses, port numbers, MAC addresses)
+	  at runtime through a userspace interface exported using configfs.
+	  See <file:Documentation/networking/netconsole.txt> for details.
+
+config NETPOLL
+	def_bool NETCONSOLE
+
+config NETPOLL_TRAP
+	bool "Netpoll traffic trapping"
+	default n
+	depends on NETPOLL
+
+config NET_POLL_CONTROLLER
+	def_bool NETPOLL
+
+config VIRTIO_NET
+	tristate "Virtio network driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && VIRTIO
+	---help---
+	  This is the virtual network driver for virtio.  It can be used with
+          lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
+
+config VMXNET3
+       tristate "VMware VMXNET3 ethernet driver"
+       depends on PCI && INET
+       help
+         This driver supports VMware's vmxnet3 virtual ethernet NIC.
+         To compile this driver as a module, choose M here: the
+         module will be called vmxnet3.
+
+endif # NETDEVICES
diff -Nur linux-2.6.35.7.orig/drivers/net/Makefile linux-2.6.35.7/drivers/net/Makefile
--- linux-2.6.35.7.orig/drivers/net/Makefile	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/net/Makefile	2010-10-14 20:28:00.878101155 +0200
@@ -109,6 +109,7 @@
 # end link order section
 #
 
+obj-$(CONFIG_AG71XX) += ag71xx/
 obj-$(CONFIG_SUNDANCE) += sundance.o
 obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
diff -Nur linux-2.6.35.7.orig/drivers/net/phy/Kconfig linux-2.6.35.7/drivers/net/phy/Kconfig
--- linux-2.6.35.7.orig/drivers/net/phy/Kconfig	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/net/phy/Kconfig	2010-10-14 20:28:00.918101155 +0200
@@ -93,6 +93,10 @@
 	---help---
 	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
 
+config IP175C_PHY
+	tristate "Driver for IC+ IP175C/IP178C switches"
+	select SWCONFIG
+
 config FIXED_PHY
 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 	depends on PHYLIB=y
diff -Nur linux-2.6.35.7.orig/drivers/net/phy/phy.c linux-2.6.35.7/drivers/net/phy/phy.c
--- linux-2.6.35.7.orig/drivers/net/phy/phy.c	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/net/phy/phy.c	2010-10-14 20:28:00.948101153 +0200
@@ -298,6 +298,50 @@
 }
 EXPORT_SYMBOL(phy_ethtool_gset);
 
+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
+{
+	u32 cmd;
+	int tmp;
+	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+	struct ethtool_value edata = { ETHTOOL_GLINK };
+
+	if (get_user(cmd, (u32 *) useraddr))
+		return -EFAULT;
+
+	switch (cmd) {
+	case ETHTOOL_GSET:
+		phy_ethtool_gset(phydev, &ecmd);
+		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
+			return -EFAULT;
+		return 0;
+
+	case ETHTOOL_SSET:
+		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
+			return -EFAULT;
+		return phy_ethtool_sset(phydev, &ecmd);
+
+	case ETHTOOL_NWAY_RST:
+		/* if autoneg is off, it's an error */
+		tmp = phy_read(phydev, MII_BMCR);
+		if (tmp & BMCR_ANENABLE) {
+			tmp |= (BMCR_ANRESTART);
+			phy_write(phydev, MII_BMCR, tmp);
+			return 0;
+		}
+		return -EINVAL;
+
+	case ETHTOOL_GLINK:
+		edata.data = (phy_read(phydev,
+				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
+		if (copy_to_user(useraddr, &edata, sizeof(edata)))
+			return -EFAULT;
+		return 0;
+	}
+
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(phy_ethtool_ioctl);
+
 /**
  * phy_mii_ioctl - generic PHY MII ioctl interface
  * @phydev: the phy_device struct
@@ -351,7 +395,7 @@
 		}
 
 		phy_write(phydev, mii_data->reg_num, val);
-		
+
 		if (mii_data->reg_num == MII_BMCR &&
 		    val & BMCR_RESET &&
 		    phydev->drv->config_init) {
@@ -465,7 +509,7 @@
 	int idx;
 
 	idx = phy_find_setting(phydev->speed, phydev->duplex);
-	
+
 	idx++;
 
 	idx = phy_find_valid(idx, phydev->supported);
diff -Nur linux-2.6.35.7.orig/drivers/net/phy/phy_device.c linux-2.6.35.7/drivers/net/phy/phy_device.c
--- linux-2.6.35.7.orig/drivers/net/phy/phy_device.c	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/net/phy/phy_device.c	2010-10-14 20:28:01.005039092 +0200
@@ -146,6 +146,18 @@
 }
 EXPORT_SYMBOL(phy_scan_fixups);
 
+static int generic_receive_skb(struct sk_buff *skb)
+{
+	skb->protocol = eth_type_trans(skb, skb->dev);
+	return netif_receive_skb(skb);
+}
+
+static int generic_rx(struct sk_buff *skb)
+{
+	skb->protocol = eth_type_trans(skb, skb->dev);
+	return netif_rx(skb);
+}
+
 struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
 {
 	struct phy_device *dev;
@@ -176,6 +188,8 @@
 	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
 
 	dev->state = PHY_DOWN;
+	dev->netif_receive_skb = &generic_receive_skb;
+	dev->netif_rx = &generic_rx;
 
 	mutex_init(&dev->lock);
 	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
diff -Nur linux-2.6.35.7.orig/drivers/net/phy/phy_device.c.orig linux-2.6.35.7/drivers/net/phy/phy_device.c.orig
--- linux-2.6.35.7.orig/drivers/net/phy/phy_device.c.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/net/phy/phy_device.c.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,1041 @@
+/*
+ * drivers/net/phy/phy_device.c
+ *
+ * Framework for finding and configuring PHYs.
+ * Also contains generic PHY driver
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+MODULE_DESCRIPTION("PHY library");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+void phy_device_free(struct phy_device *phydev)
+{
+	kfree(phydev);
+}
+EXPORT_SYMBOL(phy_device_free);
+
+static void phy_device_release(struct device *dev)
+{
+	phy_device_free(to_phy_device(dev));
+}
+
+static struct phy_driver genphy_driver;
+extern int mdio_bus_init(void);
+extern void mdio_bus_exit(void);
+
+static LIST_HEAD(phy_fixup_list);
+static DEFINE_MUTEX(phy_fixup_lock);
+
+/*
+ * Creates a new phy_fixup and adds it to the list
+ * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
+ * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
+ * 	It can also be PHY_ANY_UID
+ * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
+ * 	comparison
+ * @run: The actual code to be run when a matching PHY is found
+ */
+int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
+		int (*run)(struct phy_device *))
+{
+	struct phy_fixup *fixup;
+
+	fixup = kzalloc(sizeof(struct phy_fixup), GFP_KERNEL);
+	if (!fixup)
+		return -ENOMEM;
+
+	strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id));
+	fixup->phy_uid = phy_uid;
+	fixup->phy_uid_mask = phy_uid_mask;
+	fixup->run = run;
+
+	mutex_lock(&phy_fixup_lock);
+	list_add_tail(&fixup->list, &phy_fixup_list);
+	mutex_unlock(&phy_fixup_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_register_fixup);
+
+/* Registers a fixup to be run on any PHY with the UID in phy_uid */
+int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
+		int (*run)(struct phy_device *))
+{
+	return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
+}
+EXPORT_SYMBOL(phy_register_fixup_for_uid);
+
+/* Registers a fixup to be run on the PHY with id string bus_id */
+int phy_register_fixup_for_id(const char *bus_id,
+		int (*run)(struct phy_device *))
+{
+	return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
+}
+EXPORT_SYMBOL(phy_register_fixup_for_id);
+
+/*
+ * Returns 1 if fixup matches phydev in bus_id and phy_uid.
+ * Fixups can be set to match any in one or more fields.
+ */
+static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
+{
+	if (strcmp(fixup->bus_id, dev_name(&phydev->dev)) != 0)
+		if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
+			return 0;
+
+	if ((fixup->phy_uid & fixup->phy_uid_mask) !=
+			(phydev->phy_id & fixup->phy_uid_mask))
+		if (fixup->phy_uid != PHY_ANY_UID)
+			return 0;
+
+	return 1;
+}
+
+/* Runs any matching fixups for this phydev */
+int phy_scan_fixups(struct phy_device *phydev)
+{
+	struct phy_fixup *fixup;
+
+	mutex_lock(&phy_fixup_lock);
+	list_for_each_entry(fixup, &phy_fixup_list, list) {
+		if (phy_needs_fixup(phydev, fixup)) {
+			int err;
+
+			err = fixup->run(phydev);
+
+			if (err < 0) {
+				mutex_unlock(&phy_fixup_lock);
+				return err;
+			}
+		}
+	}
+	mutex_unlock(&phy_fixup_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_scan_fixups);
+
+struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+{
+	struct phy_device *dev;
+
+	/* We allocate the device, and initialize the
+	 * default values */
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+
+	if (NULL == dev)
+		return (struct phy_device*) PTR_ERR((void*)-ENOMEM);
+
+	dev->dev.release = phy_device_release;
+
+	dev->speed = 0;
+	dev->duplex = -1;
+	dev->pause = dev->asym_pause = 0;
+	dev->link = 1;
+	dev->interface = PHY_INTERFACE_MODE_GMII;
+
+	dev->autoneg = AUTONEG_ENABLE;
+
+	dev->addr = addr;
+	dev->phy_id = phy_id;
+	dev->bus = bus;
+	dev->dev.parent = bus->parent;
+	dev->dev.bus = &mdio_bus_type;
+	dev->irq = bus->irq != NULL ? bus->irq[addr] : PHY_POLL;
+	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
+
+	dev->state = PHY_DOWN;
+
+	mutex_init(&dev->lock);
+	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
+
+	/* Request the appropriate module unconditionally; don't
+	   bother trying to do so only if it isn't already loaded,
+	   because that gets complicated. A hotplug event would have
+	   done an unconditional modprobe anyway.
+	   We don't do normal hotplug because it won't work for MDIO
+	   -- because it relies on the device staying around for long
+	   enough for the driver to get loaded. With MDIO, the NIC
+	   driver will get bored and give up as soon as it finds that
+	   there's no driver _already_ loaded. */
+	request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id));
+
+	return dev;
+}
+EXPORT_SYMBOL(phy_device_create);
+
+/**
+ * get_phy_id - reads the specified addr for its ID.
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ * @phy_id: where to store the ID retrieved.
+ *
+ * Description: Reads the ID registers of the PHY at @addr on the
+ *   @bus, stores it in @phy_id and returns zero on success.
+ */
+int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id)
+{
+	int phy_reg;
+
+	/* Grab the bits from PHYIR1, and put them
+	 * in the upper half */
+	phy_reg = bus->read(bus, addr, MII_PHYSID1);
+
+	if (phy_reg < 0)
+		return -EIO;
+
+	*phy_id = (phy_reg & 0xffff) << 16;
+
+	/* Grab the bits from PHYIR2, and put them in the lower half */
+	phy_reg = bus->read(bus, addr, MII_PHYSID2);
+
+	if (phy_reg < 0)
+		return -EIO;
+
+	*phy_id |= (phy_reg & 0xffff);
+
+	return 0;
+}
+EXPORT_SYMBOL(get_phy_id);
+
+/**
+ * get_phy_device - reads the specified PHY device and returns its @phy_device struct
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ *
+ * Description: Reads the ID registers of the PHY at @addr on the
+ *   @bus, then allocates and returns the phy_device to represent it.
+ */
+struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
+{
+	struct phy_device *dev = NULL;
+	u32 phy_id;
+	int r;
+
+	r = get_phy_id(bus, addr, &phy_id);
+	if (r)
+		return ERR_PTR(r);
+
+	/* If the phy_id is mostly Fs, there is no device there */
+	if ((phy_id & 0x1fffffff) == 0x1fffffff)
+		return NULL;
+
+	dev = phy_device_create(bus, addr, phy_id);
+
+	return dev;
+}
+EXPORT_SYMBOL(get_phy_device);
+
+/**
+ * phy_device_register - Register the phy device on the MDIO bus
+ * @phydev: phy_device structure to be added to the MDIO bus
+ */
+int phy_device_register(struct phy_device *phydev)
+{
+	int err;
+
+	/* Don't register a phy if one is already registered at this
+	 * address */
+	if (phydev->bus->phy_map[phydev->addr])
+		return -EINVAL;
+	phydev->bus->phy_map[phydev->addr] = phydev;
+
+	/* Run all of the fixups for this PHY */
+	phy_scan_fixups(phydev);
+
+	err = device_register(&phydev->dev);
+	if (err) {
+		pr_err("phy %d failed to register\n", phydev->addr);
+		goto out;
+	}
+
+	return 0;
+
+ out:
+	phydev->bus->phy_map[phydev->addr] = NULL;
+	return err;
+}
+EXPORT_SYMBOL(phy_device_register);
+
+/**
+ * phy_find_first - finds the first PHY device on the bus
+ * @bus: the target MII bus
+ */
+struct phy_device *phy_find_first(struct mii_bus *bus)
+{
+	int addr;
+
+	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
+		if (bus->phy_map[addr])
+			return bus->phy_map[addr];
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(phy_find_first);
+
+/**
+ * phy_prepare_link - prepares the PHY layer to monitor link status
+ * @phydev: target phy_device struct
+ * @handler: callback function for link status change notifications
+ *
+ * Description: Tells the PHY infrastructure to handle the
+ *   gory details on monitoring link status (whether through
+ *   polling or an interrupt), and to call back to the
+ *   connected device driver when the link status changes.
+ *   If you want to monitor your own link state, don't call
+ *   this function.
+ */
+void phy_prepare_link(struct phy_device *phydev,
+		void (*handler)(struct net_device *))
+{
+	phydev->adjust_link = handler;
+}
+
+/**
+ * phy_connect_direct - connect an ethernet device to a specific phy_device
+ * @dev: the network device to connect
+ * @phydev: the pointer to the phy device
+ * @handler: callback function for state change notifications
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ */
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+		       void (*handler)(struct net_device *), u32 flags,
+		       phy_interface_t interface)
+{
+	int rc;
+
+	rc = phy_attach_direct(dev, phydev, flags, interface);
+	if (rc)
+		return rc;
+
+	phy_prepare_link(phydev, handler);
+	phy_start_machine(phydev, NULL);
+	if (phydev->irq > 0)
+		phy_start_interrupts(phydev);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_connect_direct);
+
+/**
+ * phy_connect - connect an ethernet device to a PHY device
+ * @dev: the network device to connect
+ * @bus_id: the id string of the PHY device to connect
+ * @handler: callback function for state change notifications
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ *
+ * Description: Convenience function for connecting ethernet
+ *   devices to PHY devices.  The default behavior is for
+ *   the PHY infrastructure to handle everything, and only notify
+ *   the connected driver when the link status changes.  If you
+ *   don't want, or can't use the provided functionality, you may
+ *   choose to call only the subset of functions which provide
+ *   the desired functionality.
+ */
+struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
+		void (*handler)(struct net_device *), u32 flags,
+		phy_interface_t interface)
+{
+	struct phy_device *phydev;
+	struct device *d;
+	int rc;
+
+	/* Search the list of PHY devices on the mdio bus for the
+	 * PHY with the requested name */
+	d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
+	if (!d) {
+		pr_err("PHY %s not found\n", bus_id);
+		return ERR_PTR(-ENODEV);
+	}
+	phydev = to_phy_device(d);
+
+	rc = phy_connect_direct(dev, phydev, handler, flags, interface);
+	if (rc)
+		return ERR_PTR(rc);
+
+	return phydev;
+}
+EXPORT_SYMBOL(phy_connect);
+
+/**
+ * phy_disconnect - disable interrupts, stop state machine, and detach a PHY device
+ * @phydev: target phy_device struct
+ */
+void phy_disconnect(struct phy_device *phydev)
+{
+	if (phydev->irq > 0)
+		phy_stop_interrupts(phydev);
+
+	phy_stop_machine(phydev);
+	
+	phydev->adjust_link = NULL;
+
+	phy_detach(phydev);
+}
+EXPORT_SYMBOL(phy_disconnect);
+
+int phy_init_hw(struct phy_device *phydev)
+{
+	int ret;
+
+	if (!phydev->drv || !phydev->drv->config_init)
+		return 0;
+
+	ret = phy_scan_fixups(phydev);
+	if (ret < 0)
+		return ret;
+
+	return phydev->drv->config_init(phydev);
+}
+
+/**
+ * phy_attach_direct - attach a network device to a given PHY device pointer
+ * @dev: network device to attach
+ * @phydev: Pointer to phy_device to attach
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ *
+ * Description: Called by drivers to attach to a particular PHY
+ *     device. The phy_device is found, and properly hooked up
+ *     to the phy_driver.  If no driver is attached, then the
+ *     genphy_driver is used.  The phy_device is given a ptr to
+ *     the attaching device, and given a callback for link status
+ *     change.  The phy_device is returned to the attaching driver.
+ */
+int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+		      u32 flags, phy_interface_t interface)
+{
+	struct device *d = &phydev->dev;
+
+	/* Assume that if there is no driver, that it doesn't
+	 * exist, and we should use the genphy driver. */
+	if (NULL == d->driver) {
+		int err;
+		d->driver = &genphy_driver.driver;
+
+		err = d->driver->probe(d);
+		if (err >= 0)
+			err = device_bind_driver(d);
+
+		if (err)
+			return err;
+	}
+
+	if (phydev->attached_dev) {
+		dev_err(&dev->dev, "PHY already attached\n");
+		return -EBUSY;
+	}
+
+	phydev->attached_dev = dev;
+
+	phydev->dev_flags = flags;
+
+	phydev->interface = interface;
+
+	/* Do initial configuration here, now that
+	 * we have certain key parameters
+	 * (dev_flags and interface) */
+	return phy_init_hw(phydev);
+}
+EXPORT_SYMBOL(phy_attach_direct);
+
+/**
+ * phy_attach - attach a network device to a particular PHY device
+ * @dev: network device to attach
+ * @bus_id: Bus ID of PHY device to attach
+ * @flags: PHY device's dev_flags
+ * @interface: PHY device's interface
+ *
+ * Description: Same as phy_attach_direct() except that a PHY bus_id
+ *     string is passed instead of a pointer to a struct phy_device.
+ */
+struct phy_device *phy_attach(struct net_device *dev,
+		const char *bus_id, u32 flags, phy_interface_t interface)
+{
+	struct bus_type *bus = &mdio_bus_type;
+	struct phy_device *phydev;
+	struct device *d;
+	int rc;
+
+	/* Search the list of PHY devices on the mdio bus for the
+	 * PHY with the requested name */
+	d = bus_find_device_by_name(bus, NULL, bus_id);
+	if (!d) {
+		pr_err("PHY %s not found\n", bus_id);
+		return ERR_PTR(-ENODEV);
+	}
+	phydev = to_phy_device(d);
+
+	rc = phy_attach_direct(dev, phydev, flags, interface);
+	if (rc)
+		return ERR_PTR(rc);
+
+	return phydev;
+}
+EXPORT_SYMBOL(phy_attach);
+
+/**
+ * phy_detach - detach a PHY device from its network device
+ * @phydev: target phy_device struct
+ */
+void phy_detach(struct phy_device *phydev)
+{
+	phydev->attached_dev = NULL;
+
+	/* If the device had no specific driver before (i.e. - it
+	 * was using the generic driver), we unbind the device
+	 * from the generic driver so that there's a chance a
+	 * real driver could be loaded */
+	if (phydev->dev.driver == &genphy_driver.driver)
+		device_release_driver(&phydev->dev);
+}
+EXPORT_SYMBOL(phy_detach);
+
+
+/* Generic PHY support and helper functions */
+
+/**
+ * genphy_config_advert - sanitize and advertise auto-negotation parameters
+ * @phydev: target phy_device struct
+ *
+ * Description: Writes MII_ADVERTISE with the appropriate values,
+ *   after sanitizing the values to make sure we only advertise
+ *   what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
+ *   hasn't changed, and > 0 if it has changed.
+ */
+int genphy_config_advert(struct phy_device *phydev)
+{
+	u32 advertise;
+	int oldadv, adv;
+	int err, changed = 0;
+
+	/* Only allow advertising what
+	 * this PHY supports */
+	phydev->advertising &= phydev->supported;
+	advertise = phydev->advertising;
+
+	/* Setup standard advertisement */
+	oldadv = adv = phy_read(phydev, MII_ADVERTISE);
+
+	if (adv < 0)
+		return adv;
+
+	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | 
+		 ADVERTISE_PAUSE_ASYM);
+	if (advertise & ADVERTISED_10baseT_Half)
+		adv |= ADVERTISE_10HALF;
+	if (advertise & ADVERTISED_10baseT_Full)
+		adv |= ADVERTISE_10FULL;
+	if (advertise & ADVERTISED_100baseT_Half)
+		adv |= ADVERTISE_100HALF;
+	if (advertise & ADVERTISED_100baseT_Full)
+		adv |= ADVERTISE_100FULL;
+	if (advertise & ADVERTISED_Pause)
+		adv |= ADVERTISE_PAUSE_CAP;
+	if (advertise & ADVERTISED_Asym_Pause)
+		adv |= ADVERTISE_PAUSE_ASYM;
+
+	if (adv != oldadv) {
+		err = phy_write(phydev, MII_ADVERTISE, adv);
+
+		if (err < 0)
+			return err;
+		changed = 1;
+	}
+
+	/* Configure gigabit if it's supported */
+	if (phydev->supported & (SUPPORTED_1000baseT_Half |
+				SUPPORTED_1000baseT_Full)) {
+		oldadv = adv = phy_read(phydev, MII_CTRL1000);
+
+		if (adv < 0)
+			return adv;
+
+		adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+		if (advertise & SUPPORTED_1000baseT_Half)
+			adv |= ADVERTISE_1000HALF;
+		if (advertise & SUPPORTED_1000baseT_Full)
+			adv |= ADVERTISE_1000FULL;
+
+		if (adv != oldadv) {
+			err = phy_write(phydev, MII_CTRL1000, adv);
+
+			if (err < 0)
+				return err;
+			changed = 1;
+		}
+	}
+
+	return changed;
+}
+EXPORT_SYMBOL(genphy_config_advert);
+
+/**
+ * genphy_setup_forced - configures/forces speed/duplex from @phydev
+ * @phydev: target phy_device struct
+ *
+ * Description: Configures MII_BMCR to force speed/duplex
+ *   to the values in phydev. Assumes that the values are valid.
+ *   Please see phy_sanitize_settings().
+ */
+int genphy_setup_forced(struct phy_device *phydev)
+{
+	int err;
+	int ctl = 0;
+
+	phydev->pause = phydev->asym_pause = 0;
+
+	if (SPEED_1000 == phydev->speed)
+		ctl |= BMCR_SPEED1000;
+	else if (SPEED_100 == phydev->speed)
+		ctl |= BMCR_SPEED100;
+
+	if (DUPLEX_FULL == phydev->duplex)
+		ctl |= BMCR_FULLDPLX;
+	
+	err = phy_write(phydev, MII_BMCR, ctl);
+
+	return err;
+}
+
+
+/**
+ * genphy_restart_aneg - Enable and Restart Autonegotiation
+ * @phydev: target phy_device struct
+ */
+int genphy_restart_aneg(struct phy_device *phydev)
+{
+	int ctl;
+
+	ctl = phy_read(phydev, MII_BMCR);
+
+	if (ctl < 0)
+		return ctl;
+
+	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+
+	/* Don't isolate the PHY if we're negotiating */
+	ctl &= ~(BMCR_ISOLATE);
+
+	ctl = phy_write(phydev, MII_BMCR, ctl);
+
+	return ctl;
+}
+EXPORT_SYMBOL(genphy_restart_aneg);
+
+
+/**
+ * genphy_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ *   advertising, and then restart auto-negotiation.  If it is not
+ *   enabled, then we write the BMCR.
+ */
+int genphy_config_aneg(struct phy_device *phydev)
+{
+	int result;
+
+	if (AUTONEG_ENABLE != phydev->autoneg)
+		return genphy_setup_forced(phydev);
+
+	result = genphy_config_advert(phydev);
+
+	if (result < 0) /* error */
+		return result;
+
+	if (result == 0) {
+		/* Advertisment hasn't changed, but maybe aneg was never on to
+		 * begin with?  Or maybe phy was isolated? */
+		int ctl = phy_read(phydev, MII_BMCR);
+
+		if (ctl < 0)
+			return ctl;
+
+		if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
+			result = 1; /* do restart aneg */
+	}
+
+	/* Only restart aneg if we are advertising something different
+	 * than we were before.	 */
+	if (result > 0)
+		result = genphy_restart_aneg(phydev);
+
+	return result;
+}
+EXPORT_SYMBOL(genphy_config_aneg);
+
+/**
+ * genphy_update_link - update link status in @phydev
+ * @phydev: target phy_device struct
+ *
+ * Description: Update the value in phydev->link to reflect the
+ *   current link value.  In order to do this, we need to read
+ *   the status register twice, keeping the second value.
+ */
+int genphy_update_link(struct phy_device *phydev)
+{
+	int status;
+
+	/* Do a fake read */
+	status = phy_read(phydev, MII_BMSR);
+
+	if (status < 0)
+		return status;
+
+	/* Read link and autonegotiation status */
+	status = phy_read(phydev, MII_BMSR);
+
+	if (status < 0)
+		return status;
+
+	if ((status & BMSR_LSTATUS) == 0)
+		phydev->link = 0;
+	else
+		phydev->link = 1;
+
+	return 0;
+}
+EXPORT_SYMBOL(genphy_update_link);
+
+/**
+ * genphy_read_status - check the link status and update current link state
+ * @phydev: target phy_device struct
+ *
+ * Description: Check the link, then figure out the current state
+ *   by comparing what we advertise with what the link partner
+ *   advertises.  Start by checking the gigabit possibilities,
+ *   then move on to 10/100.
+ */
+int genphy_read_status(struct phy_device *phydev)
+{
+	int adv;
+	int err;
+	int lpa;
+	int lpagb = 0;
+
+	/* Update the link, but return if there
+	 * was an error */
+	err = genphy_update_link(phydev);
+	if (err)
+		return err;
+
+	if (AUTONEG_ENABLE == phydev->autoneg) {
+		if (phydev->supported & (SUPPORTED_1000baseT_Half
+					| SUPPORTED_1000baseT_Full)) {
+			lpagb = phy_read(phydev, MII_STAT1000);
+
+			if (lpagb < 0)
+				return lpagb;
+
+			adv = phy_read(phydev, MII_CTRL1000);
+
+			if (adv < 0)
+				return adv;
+
+			lpagb &= adv << 2;
+		}
+
+		lpa = phy_read(phydev, MII_LPA);
+
+		if (lpa < 0)
+			return lpa;
+
+		adv = phy_read(phydev, MII_ADVERTISE);
+
+		if (adv < 0)
+			return adv;
+
+		lpa &= adv;
+
+		phydev->speed = SPEED_10;
+		phydev->duplex = DUPLEX_HALF;
+		phydev->pause = phydev->asym_pause = 0;
+
+		if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
+			phydev->speed = SPEED_1000;
+
+			if (lpagb & LPA_1000FULL)
+				phydev->duplex = DUPLEX_FULL;
+		} else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+			phydev->speed = SPEED_100;
+			
+			if (lpa & LPA_100FULL)
+				phydev->duplex = DUPLEX_FULL;
+		} else
+			if (lpa & LPA_10FULL)
+				phydev->duplex = DUPLEX_FULL;
+
+		if (phydev->duplex == DUPLEX_FULL){
+			phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+			phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+		}
+	} else {
+		int bmcr = phy_read(phydev, MII_BMCR);
+		if (bmcr < 0)
+			return bmcr;
+
+		if (bmcr & BMCR_FULLDPLX)
+			phydev->duplex = DUPLEX_FULL;
+		else
+			phydev->duplex = DUPLEX_HALF;
+
+		if (bmcr & BMCR_SPEED1000)
+			phydev->speed = SPEED_1000;
+		else if (bmcr & BMCR_SPEED100)
+			phydev->speed = SPEED_100;
+		else
+			phydev->speed = SPEED_10;
+
+		phydev->pause = phydev->asym_pause = 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(genphy_read_status);
+
+static int genphy_config_init(struct phy_device *phydev)
+{
+	int val;
+	u32 features;
+
+	/* For now, I'll claim that the generic driver supports
+	 * all possible port types */
+	features = (SUPPORTED_TP | SUPPORTED_MII
+			| SUPPORTED_AUI | SUPPORTED_FIBRE |
+			SUPPORTED_BNC);
+
+	/* Do we support autonegotiation? */
+	val = phy_read(phydev, MII_BMSR);
+
+	if (val < 0)
+		return val;
+
+	if (val & BMSR_ANEGCAPABLE)
+		features |= SUPPORTED_Autoneg;
+
+	if (val & BMSR_100FULL)
+		features |= SUPPORTED_100baseT_Full;
+	if (val & BMSR_100HALF)
+		features |= SUPPORTED_100baseT_Half;
+	if (val & BMSR_10FULL)
+		features |= SUPPORTED_10baseT_Full;
+	if (val & BMSR_10HALF)
+		features |= SUPPORTED_10baseT_Half;
+
+	if (val & BMSR_ESTATEN) {
+		val = phy_read(phydev, MII_ESTATUS);
+
+		if (val < 0)
+			return val;
+
+		if (val & ESTATUS_1000_TFULL)
+			features |= SUPPORTED_1000baseT_Full;
+		if (val & ESTATUS_1000_THALF)
+			features |= SUPPORTED_1000baseT_Half;
+	}
+
+	phydev->supported = features;
+	phydev->advertising = features;
+
+	return 0;
+}
+int genphy_suspend(struct phy_device *phydev)
+{
+	int value;
+
+	mutex_lock(&phydev->lock);
+
+	value = phy_read(phydev, MII_BMCR);
+	phy_write(phydev, MII_BMCR, (value | BMCR_PDOWN));
+
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(genphy_suspend);
+
+int genphy_resume(struct phy_device *phydev)
+{
+	int value;
+
+	mutex_lock(&phydev->lock);
+
+	value = phy_read(phydev, MII_BMCR);
+	phy_write(phydev, MII_BMCR, (value & ~BMCR_PDOWN));
+
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(genphy_resume);
+
+/**
+ * phy_probe - probe and init a PHY device
+ * @dev: device to probe and init
+ *
+ * Description: Take care of setting up the phy_device structure,
+ *   set the state to READY (the driver's init function should
+ *   set it to STARTING if needed).
+ */
+static int phy_probe(struct device *dev)
+{
+	struct phy_device *phydev;
+	struct phy_driver *phydrv;
+	struct device_driver *drv;
+	int err = 0;
+
+	phydev = to_phy_device(dev);
+
+	/* Make sure the driver is held.
+	 * XXX -- Is this correct? */
+	drv = get_driver(phydev->dev.driver);
+	phydrv = to_phy_driver(drv);
+	phydev->drv = phydrv;
+
+	/* Disable the interrupt if the PHY doesn't support it */
+	if (!(phydrv->flags & PHY_HAS_INTERRUPT))
+		phydev->irq = PHY_POLL;
+
+	mutex_lock(&phydev->lock);
+
+	/* Start out supporting everything. Eventually,
+	 * a controller will attach, and may modify one
+	 * or both of these values */
+	phydev->supported = phydrv->features;
+	phydev->advertising = phydrv->features;
+
+	/* Set the state to READY by default */
+	phydev->state = PHY_READY;
+
+	if (phydev->drv->probe)
+		err = phydev->drv->probe(phydev);
+
+	mutex_unlock(&phydev->lock);
+
+	return err;
+
+}
+
+static int phy_remove(struct device *dev)
+{
+	struct phy_device *phydev;
+
+	phydev = to_phy_device(dev);
+
+	mutex_lock(&phydev->lock);
+	phydev->state = PHY_DOWN;
+	mutex_unlock(&phydev->lock);
+
+	if (phydev->drv->remove)
+		phydev->drv->remove(phydev);
+
+	put_driver(dev->driver);
+	phydev->drv = NULL;
+
+	return 0;
+}
+
+/**
+ * phy_driver_register - register a phy_driver with the PHY layer
+ * @new_driver: new phy_driver to register
+ */
+int phy_driver_register(struct phy_driver *new_driver)
+{
+	int retval;
+
+	new_driver->driver.name = new_driver->name;
+	new_driver->driver.bus = &mdio_bus_type;
+	new_driver->driver.probe = phy_probe;
+	new_driver->driver.remove = phy_remove;
+
+	retval = driver_register(&new_driver->driver);
+
+	if (retval) {
+		printk(KERN_ERR "%s: Error %d in registering driver\n",
+				new_driver->name, retval);
+
+		return retval;
+	}
+
+	pr_debug("%s: Registered new driver\n", new_driver->name);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_driver_register);
+
+void phy_driver_unregister(struct phy_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(phy_driver_unregister);
+
+static struct phy_driver genphy_driver = {
+	.phy_id		= 0xffffffff,
+	.phy_id_mask	= 0xffffffff,
+	.name		= "Generic PHY",
+	.config_init	= genphy_config_init,
+	.features	= 0,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.driver		= {.owner= THIS_MODULE, },
+};
+
+static int __init phy_init(void)
+{
+	int rc;
+
+	rc = mdio_bus_init();
+	if (rc)
+		return rc;
+
+	rc = phy_driver_register(&genphy_driver);
+	if (rc)
+		mdio_bus_exit();
+
+	return rc;
+}
+
+static void __exit phy_exit(void)
+{
+	phy_driver_unregister(&genphy_driver);
+	mdio_bus_exit();
+}
+
+subsys_initcall(phy_init);
+module_exit(phy_exit);
diff -Nur linux-2.6.35.7.orig/drivers/spi/ap83_spi.c linux-2.6.35.7/drivers/spi/ap83_spi.c
--- linux-2.6.35.7.orig/drivers/spi/ap83_spi.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/spi/ap83_spi.c	2010-10-14 20:28:01.048101088 +0200
@@ -0,0 +1,282 @@
+/*
+ * Atheros AP83 board specific SPI Controller driver
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/platform.h>
+
+#define DRV_DESC	"Atheros AP83 board SPI Controller driver"
+#define DRV_VERSION	"0.1.0"
+#define DRV_NAME	"ap83-spi"
+
+#define AP83_SPI_CLK_HIGH	(1 << 23)
+#define AP83_SPI_CLK_LOW	0
+#define AP83_SPI_MOSI_HIGH	(1 << 22)
+#define AP83_SPI_MOSI_LOW	0
+
+#define AP83_SPI_GPIO_CS	1
+#define AP83_SPI_GPIO_MISO	3
+
+struct ap83_spi {
+	struct	spi_bitbang 	bitbang;
+	void __iomem 		*base;
+	u32			addr;
+
+	struct platform_device	*pdev;
+};
+
+static inline u32 ap83_spi_rr(struct ap83_spi *sp, u32 reg)
+{
+	return __raw_readl(sp->base + reg);
+}
+
+static inline struct ap83_spi *spidev_to_sp(struct spi_device *spi)
+{
+	return spi_master_get_devdata(spi->master);
+}
+
+static inline void setsck(struct spi_device *spi, int val)
+{
+	struct ap83_spi *sp = spidev_to_sp(spi);
+
+	if (val)
+		sp->addr |= AP83_SPI_CLK_HIGH;
+	else
+		sp->addr &= ~AP83_SPI_CLK_HIGH;
+
+	dev_dbg(&spi->dev, "addr=%08x,  SCK set to %s\n",
+		sp->addr, (val) ? "HIGH" : "LOW");
+
+	ap83_spi_rr(sp, sp->addr);
+}
+
+static inline void setmosi(struct spi_device *spi, int val)
+{
+	struct ap83_spi *sp = spidev_to_sp(spi);
+
+	if (val)
+		sp->addr |= AP83_SPI_MOSI_HIGH;
+	else
+		sp->addr &= ~AP83_SPI_MOSI_HIGH;
+
+	dev_dbg(&spi->dev, "addr=%08x, MOSI set to %s\n",
+		sp->addr, (val) ? "HIGH" : "LOW");
+
+	ap83_spi_rr(sp, sp->addr);
+}
+
+static inline u32 getmiso(struct spi_device *spi)
+{
+	u32 ret;
+
+	ret = gpio_get_value(AP83_SPI_GPIO_MISO) ? 1 : 0;
+	dev_dbg(&spi->dev, "get MISO: %d\n", ret);
+
+	return ret;
+}
+
+static inline void do_spidelay(struct spi_device *spi, unsigned nsecs)
+{
+	ndelay(nsecs);
+}
+
+static void ap83_spi_chipselect(struct spi_device *spi, int on)
+{
+	struct ap83_spi *sp = spidev_to_sp(spi);
+
+	dev_dbg(&spi->dev, "set CS to %d\n", (on) ? 0 : 1);
+
+	if (on) {
+		ar71xx_flash_acquire();
+
+		sp->addr = 0;
+		ap83_spi_rr(sp, sp->addr);
+
+		gpio_set_value(AP83_SPI_GPIO_CS, 0);
+	} else {
+		gpio_set_value(AP83_SPI_GPIO_CS, 1);
+		ar71xx_flash_release();
+	}
+}
+
+#define spidelay(nsecs)							\
+	do {								\
+		/* Steal the spi_device pointer from our caller.	\
+		 * The bitbang-API should probably get fixed here... */	\
+		do_spidelay(spi, nsecs);				\
+	} while (0)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+static u32 ap83_spi_txrx_mode0(struct spi_device *spi,
+			       unsigned nsecs, u32 word, u8 bits)
+{
+	dev_dbg(&spi->dev, "TXRX0 word=%08x, bits=%u\n", word, bits);
+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 ap83_spi_txrx_mode1(struct spi_device *spi,
+			       unsigned nsecs, u32 word, u8 bits)
+{
+	dev_dbg(&spi->dev, "TXRX1 word=%08x, bits=%u\n", word, bits);
+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static u32 ap83_spi_txrx_mode2(struct spi_device *spi,
+			       unsigned nsecs, u32 word, u8 bits)
+{
+	dev_dbg(&spi->dev, "TXRX2 word=%08x, bits=%u\n", word, bits);
+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+}
+
+static u32 ap83_spi_txrx_mode3(struct spi_device *spi,
+			       unsigned nsecs, u32 word, u8 bits)
+{
+	dev_dbg(&spi->dev, "TXRX3 word=%08x, bits=%u\n", word, bits);
+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+}
+
+static int ap83_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct ap83_spi *sp;
+	struct ap83_spi_platform_data *pdata;
+	struct resource	*r;
+	int ret;
+
+	ret = gpio_request(AP83_SPI_GPIO_MISO, "spi-miso");
+	if (ret) {
+		dev_err(&pdev->dev, "gpio request failed for MISO\n");
+		return ret;
+	}
+
+	ret = gpio_request(AP83_SPI_GPIO_CS, "spi-cs");
+	if (ret) {
+		dev_err(&pdev->dev, "gpio request failed for CS\n");
+		goto err_free_miso;
+	}
+
+	ret = gpio_direction_input(AP83_SPI_GPIO_MISO);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to set direction of MISO\n");
+		goto err_free_cs;
+	}
+
+	ret = gpio_direction_output(AP83_SPI_GPIO_CS, 0);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to set direction of CS\n");
+		goto err_free_cs;
+	}
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "failed to allocate spi master\n");
+		return -ENOMEM;
+	}
+
+	sp = spi_master_get_devdata(master);
+	platform_set_drvdata(pdev, sp);
+
+	pdata = pdev->dev.platform_data;
+
+	sp->bitbang.master = spi_master_get(master);
+	sp->bitbang.chipselect = ap83_spi_chipselect;
+	sp->bitbang.txrx_word[SPI_MODE_0] = ap83_spi_txrx_mode0;
+	sp->bitbang.txrx_word[SPI_MODE_1] = ap83_spi_txrx_mode1;
+	sp->bitbang.txrx_word[SPI_MODE_2] = ap83_spi_txrx_mode2;
+	sp->bitbang.txrx_word[SPI_MODE_3] = ap83_spi_txrx_mode3;
+
+	sp->bitbang.master->bus_num = pdev->id;
+	sp->bitbang.master->num_chipselect = 1;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		ret = -ENOENT;
+		goto err_spi_put;
+	}
+
+	sp->base = ioremap_nocache(r->start, r->end - r->start + 1);
+	if (!sp->base) {
+		ret = -ENXIO;
+		goto err_spi_put;
+	}
+
+	ret = spi_bitbang_start(&sp->bitbang);
+	if (!ret)
+		goto err_unmap;
+
+	dev_info(&pdev->dev, "AP83 SPI adapter at %08x\n", r->start);
+
+	return 0;
+
+ err_unmap:
+	iounmap(sp->base);
+ err_spi_put:
+	platform_set_drvdata(pdev, NULL);
+	spi_master_put(sp->bitbang.master);
+
+ err_free_cs:
+	gpio_free(AP83_SPI_GPIO_CS);
+ err_free_miso:
+	gpio_free(AP83_SPI_GPIO_MISO);
+	return ret;
+}
+
+static int ap83_spi_remove(struct platform_device *pdev)
+{
+	struct ap83_spi *sp = platform_get_drvdata(pdev);
+
+	spi_bitbang_stop(&sp->bitbang);
+	iounmap(sp->base);
+	platform_set_drvdata(pdev, NULL);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+static struct platform_driver ap83_spi_drv = {
+	.probe		= ap83_spi_probe,
+	.remove		= ap83_spi_remove,
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ap83_spi_init(void)
+{
+	return platform_driver_register(&ap83_spi_drv);
+}
+module_init(ap83_spi_init);
+
+static void __exit ap83_spi_exit(void)
+{
+	platform_driver_unregister(&ap83_spi_drv);
+}
+module_exit(ap83_spi_exit);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff -Nur linux-2.6.35.7.orig/drivers/spi/ar71xx_spi.c linux-2.6.35.7/drivers/spi/ar71xx_spi.c
--- linux-2.6.35.7.orig/drivers/spi/ar71xx_spi.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/spi/ar71xx_spi.c	2010-10-14 20:28:01.088050552 +0200
@@ -0,0 +1,283 @@
+/*
+ * Atheros AR71xx SPI Controller driver
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/bitops.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/platform.h>
+
+#define DRV_DESC	"Atheros AR71xx SPI Controller driver"
+#define DRV_VERSION	"0.2.4"
+#define DRV_NAME	"ar71xx-spi"
+
+#undef PER_BIT_READ
+
+struct ar71xx_spi {
+	struct	spi_bitbang 	bitbang;
+	u32			ioc_base;
+	u32			reg_ctrl;
+
+	void __iomem 		*base;
+
+	struct platform_device	*pdev;
+	u32			(*get_ioc_base)(u8 chip_select, int cs_high,
+						int is_on);
+};
+
+static inline u32 ar71xx_spi_rr(struct ar71xx_spi *sp, unsigned reg)
+{
+	return __raw_readl(sp->base + reg);
+}
+
+static inline void ar71xx_spi_wr(struct ar71xx_spi *sp, unsigned reg, u32 val)
+{
+	__raw_writel(val, sp->base + reg);
+}
+
+static inline struct ar71xx_spi *spidev_to_sp(struct spi_device *spi)
+{
+	return spi_master_get_devdata(spi->master);
+}
+
+static u32 ar71xx_spi_get_ioc_base(u8 chip_select, int cs_high, int is_on)
+{
+	u32 ret;
+
+	if (is_on == AR71XX_SPI_CS_INACTIVE)
+		ret = SPI_IOC_CS_ALL;
+	else
+		ret = SPI_IOC_CS_ALL & ~SPI_IOC_CS(chip_select);
+
+	return ret;
+}
+
+static void ar71xx_spi_chipselect(struct spi_device *spi, int value)
+{
+	struct ar71xx_spi *sp = spidev_to_sp(spi);
+	void __iomem *base = sp->base;
+	u32 ioc_base;
+
+	switch (value) {
+	case BITBANG_CS_INACTIVE:
+		ioc_base = sp->get_ioc_base(spi->chip_select,
+					(spi->mode & SPI_CS_HIGH) != 0,
+					AR71XX_SPI_CS_INACTIVE);
+		__raw_writel(ioc_base, base + SPI_REG_IOC);
+		break;
+
+	case BITBANG_CS_ACTIVE:
+		ioc_base = sp->get_ioc_base(spi->chip_select,
+					(spi->mode & SPI_CS_HIGH) != 0,
+					AR71XX_SPI_CS_ACTIVE);
+
+		__raw_writel(ioc_base, base + SPI_REG_IOC);
+		sp->ioc_base = ioc_base;
+		break;
+	}
+}
+
+static void ar71xx_spi_setup_regs(struct spi_device *spi)
+{
+	struct ar71xx_spi *sp = spidev_to_sp(spi);
+
+	/* enable GPIO mode */
+	ar71xx_spi_wr(sp, SPI_REG_FS, SPI_FS_GPIO);
+
+	/* save CTRL register */
+	sp->reg_ctrl = ar71xx_spi_rr(sp, SPI_REG_CTRL);
+
+	/* TODO: setup speed? */
+	ar71xx_spi_wr(sp, SPI_REG_CTRL, 0x43);
+}
+
+static void ar71xx_spi_restore_regs(struct spi_device *spi)
+{
+	struct ar71xx_spi *sp = spidev_to_sp(spi);
+
+	/* restore CTRL register */
+	ar71xx_spi_wr(sp, SPI_REG_CTRL, sp->reg_ctrl);
+	/* disable GPIO mode */
+	ar71xx_spi_wr(sp, SPI_REG_FS, 0);
+}
+
+static int ar71xx_spi_setup(struct spi_device *spi)
+{
+	int status;
+
+	if (spi->bits_per_word > 32)
+		return -EINVAL;
+
+	if (!spi->controller_state)
+		ar71xx_spi_setup_regs(spi);
+
+	status = spi_bitbang_setup(spi);
+	if (status && !spi->controller_state)
+		ar71xx_spi_restore_regs(spi);
+
+	return status;
+}
+
+static void ar71xx_spi_cleanup(struct spi_device *spi)
+{
+	ar71xx_spi_restore_regs(spi);
+	spi_bitbang_cleanup(spi);
+}
+
+static u32 ar71xx_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs,
+					u32 word, u8 bits)
+{
+	struct ar71xx_spi *sp = spidev_to_sp(spi);
+	void __iomem *base = sp->base;
+	u32 ioc = sp->ioc_base;
+	u32 ret;
+
+	/* clock starts at inactive polarity */
+	for (word <<= (32 - bits); likely(bits); bits--) {
+		u32 out;
+
+		if (word & (1 << 31))
+			out = ioc | SPI_IOC_DO;
+		else
+			out = ioc & ~SPI_IOC_DO;
+
+		/* setup MSB (to slave) on trailing edge */
+		__raw_writel(out, base + SPI_REG_IOC);
+
+		__raw_writel(out | SPI_IOC_CLK, base + SPI_REG_IOC);
+
+		word <<= 1;
+
+#ifdef PER_BIT_READ
+		/* sample MSB (from slave) on leading edge */
+		ret = __raw_readl(base + SPI_REG_RDS);
+		__raw_writel(out, base + SPI_REG_IOC);
+#endif
+
+	}
+
+#ifndef PER_BIT_READ
+	ret = __raw_readl(base + SPI_REG_RDS);
+#endif
+	return ret;
+}
+
+static int ar71xx_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct ar71xx_spi *sp;
+	struct ar71xx_spi_platform_data *pdata;
+	struct resource	*r;
+	int ret;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "failed to allocate spi master\n");
+		return -ENOMEM;
+	}
+
+	sp = spi_master_get_devdata(master);
+	platform_set_drvdata(pdev, sp);
+
+	pdata = pdev->dev.platform_data;
+
+	master->setup = ar71xx_spi_setup;
+	master->cleanup = ar71xx_spi_cleanup;
+
+	sp->bitbang.master = spi_master_get(master);
+	sp->bitbang.chipselect = ar71xx_spi_chipselect;
+	sp->bitbang.txrx_word[SPI_MODE_0] = ar71xx_spi_txrx_mode0;
+	sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
+
+	sp->get_ioc_base = ar71xx_spi_get_ioc_base;
+	if (pdata) {
+		sp->bitbang.master->bus_num = pdata->bus_num;
+		sp->bitbang.master->num_chipselect = pdata->num_chipselect;
+		if (pdata->get_ioc_base)
+			sp->get_ioc_base = pdata->get_ioc_base;
+	} else {
+		sp->bitbang.master->bus_num = 0;
+		sp->bitbang.master->num_chipselect = 3;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		ret = -ENOENT;
+		goto err1;
+	}
+
+	sp->base = ioremap_nocache(r->start, r->end - r->start + 1);
+	if (!sp->base) {
+		ret = -ENXIO;
+		goto err1;
+	}
+
+	ret = spi_bitbang_start(&sp->bitbang);
+	if (!ret)
+		return 0;
+
+	iounmap(sp->base);
+ err1:
+	platform_set_drvdata(pdev, NULL);
+	spi_master_put(sp->bitbang.master);
+
+	return ret;
+}
+
+static int ar71xx_spi_remove(struct platform_device *pdev)
+{
+	struct ar71xx_spi *sp = platform_get_drvdata(pdev);
+
+	spi_bitbang_stop(&sp->bitbang);
+	iounmap(sp->base);
+	platform_set_drvdata(pdev, NULL);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+static struct platform_driver ar71xx_spi_drv = {
+	.probe		= ar71xx_spi_probe,
+	.remove		= ar71xx_spi_remove,
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ar71xx_spi_init(void)
+{
+	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
+	return platform_driver_register(&ar71xx_spi_drv);
+}
+module_init(ar71xx_spi_init);
+
+static void __exit ar71xx_spi_exit(void)
+{
+	platform_driver_unregister(&ar71xx_spi_drv);
+}
+module_exit(ar71xx_spi_exit);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff -Nur linux-2.6.35.7.orig/drivers/spi/Kconfig linux-2.6.35.7/drivers/spi/Kconfig
--- linux-2.6.35.7.orig/drivers/spi/Kconfig	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/spi/Kconfig	2010-10-14 20:28:01.128101086 +0200
@@ -53,6 +53,13 @@
 
 comment "SPI Master Controller Drivers"
 
+config SPI_AR71XX
+	tristate "Atheros AR71xx SPI Controller"
+	depends on SPI_MASTER && ATHEROS_AR71XX
+	select SPI_BITBANG
+	help
+	  This is the SPI contoller driver for Atheros AR71xx.
+
 config SPI_ATMEL
 	tristate "Atmel SPI Controller"
 	depends on (ARCH_AT91 || AVR32)
diff -Nur linux-2.6.35.7.orig/drivers/spi/Makefile linux-2.6.35.7/drivers/spi/Makefile
--- linux-2.6.35.7.orig/drivers/spi/Makefile	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/spi/Makefile	2010-10-14 20:28:01.168101108 +0200
@@ -11,6 +11,7 @@
 obj-$(CONFIG_SPI_MASTER)		+= spi.o
 
 # SPI master controller drivers (bus)
+obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
 obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
 obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
diff -Nur linux-2.6.35.7.orig/drivers/spi/pb44_spi.c linux-2.6.35.7/drivers/spi/pb44_spi.c
--- linux-2.6.35.7.orig/drivers/spi/pb44_spi.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/spi/pb44_spi.c	2010-10-14 20:28:01.205601089 +0200
@@ -0,0 +1,299 @@
+/*
+ * Atheros PB44 board SPI controller driver
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/platform.h>
+
+#define DRV_DESC	"Atheros PB44 SPI Controller driver"
+#define DRV_VERSION	"0.1.0"
+#define DRV_NAME	"pb44-spi"
+
+#undef PER_BIT_READ
+
+struct ar71xx_spi {
+	struct	spi_bitbang 	bitbang;
+	u32			ioc_base;
+	u32			reg_ctrl;
+
+	void __iomem 		*base;
+
+	struct platform_device	*pdev;
+};
+
+static inline u32 pb44_spi_rr(struct ar71xx_spi *sp, unsigned reg)
+{
+	return __raw_readl(sp->base + reg);
+}
+
+static inline void pb44_spi_wr(struct ar71xx_spi *sp, unsigned reg, u32 val)
+{
+	__raw_writel(val, sp->base + reg);
+}
+
+static inline struct ar71xx_spi *spidev_to_sp(struct spi_device *spi)
+{
+	return spi_master_get_devdata(spi->master);
+}
+
+static void pb44_spi_chipselect(struct spi_device *spi, int is_active)
+{
+	struct ar71xx_spi *sp = spidev_to_sp(spi);
+	int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
+
+	if (is_active) {
+		/* set initial clock polarity */
+		if (spi->mode & SPI_CPOL)
+			sp->ioc_base |= SPI_IOC_CLK;
+		else
+			sp->ioc_base &= ~SPI_IOC_CLK;
+
+		pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base);
+	}
+
+	if (spi->chip_select) {
+		unsigned long gpio = (unsigned long) spi->controller_data;
+
+		/* SPI is normally active-low */
+		gpio_set_value(gpio, cs_high);
+	} else {
+		if (cs_high)
+			sp->ioc_base |= SPI_IOC_CS0;
+		else
+			sp->ioc_base &= ~SPI_IOC_CS0;
+
+		pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base);
+	}
+
+}
+
+static int pb44_spi_setup_cs(struct spi_device *spi)
+{
+	struct ar71xx_spi *sp = spidev_to_sp(spi);
+
+	/* enable GPIO mode */
+	pb44_spi_wr(sp, SPI_REG_FS, SPI_FS_GPIO);
+
+	/* save CTRL register */
+	sp->reg_ctrl = pb44_spi_rr(sp, SPI_REG_CTRL);
+	sp->ioc_base = pb44_spi_rr(sp, SPI_REG_IOC);
+
+	/* TODO: setup speed? */
+	pb44_spi_wr(sp, SPI_REG_CTRL, 0x43);
+
+	if (spi->chip_select) {
+		unsigned long gpio = (unsigned long) spi->controller_data;
+		int status = 0;
+
+		status = gpio_request(gpio, dev_name(&spi->dev));
+		if (status)
+			return status;
+
+		status = gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH);
+		if (status) {
+			gpio_free(gpio);
+			return status;
+		}
+	} else {
+		if (spi->mode & SPI_CS_HIGH)
+			sp->ioc_base |= SPI_IOC_CS0;
+		else
+			sp->ioc_base &= ~SPI_IOC_CS0;
+		pb44_spi_wr(sp, SPI_REG_IOC, sp->ioc_base);
+	}
+
+	return 0;
+}
+
+static void pb44_spi_cleanup_cs(struct spi_device *spi)
+{
+	struct ar71xx_spi *sp = spidev_to_sp(spi);
+
+	if (spi->chip_select) {
+		unsigned long gpio = (unsigned long) spi->controller_data;
+		gpio_free(gpio);
+	}
+
+	/* restore CTRL register */
+	pb44_spi_wr(sp, SPI_REG_CTRL, sp->reg_ctrl);
+	/* disable GPIO mode */
+	pb44_spi_wr(sp, SPI_REG_FS, 0);
+}
+
+static int pb44_spi_setup(struct spi_device *spi)
+{
+	int status = 0;
+
+	if (spi->bits_per_word > 32)
+		return -EINVAL;
+
+	if (!spi->controller_state) {
+		status = pb44_spi_setup_cs(spi);
+		if (status)
+			return status;
+	}
+
+	status = spi_bitbang_setup(spi);
+	if (status && !spi->controller_state)
+		pb44_spi_cleanup_cs(spi);
+
+	return status;
+}
+
+static void pb44_spi_cleanup(struct spi_device *spi)
+{
+	pb44_spi_cleanup_cs(spi);
+	spi_bitbang_cleanup(spi);
+}
+
+static u32 pb44_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs,
+			       u32 word, u8 bits)
+{
+	struct ar71xx_spi *sp = spidev_to_sp(spi);
+	u32 ioc = sp->ioc_base;
+	u32 ret;
+
+	/* clock starts at inactive polarity */
+	for (word <<= (32 - bits); likely(bits); bits--) {
+		u32 out;
+
+		if (word & (1 << 31))
+			out = ioc | SPI_IOC_DO;
+		else
+			out = ioc & ~SPI_IOC_DO;
+
+		/* setup MSB (to slave) on trailing edge */
+		pb44_spi_wr(sp, SPI_REG_IOC, out);
+		pb44_spi_wr(sp, SPI_REG_IOC, out | SPI_IOC_CLK);
+
+		word <<= 1;
+
+#ifdef PER_BIT_READ
+		/* sample MSB (from slave) on leading edge */
+		ret = pb44_spi_rr(sp, SPI_REG_RDS);
+		pb44_spi_wr(sp, SPI_REG_IOC, out);
+#endif
+	}
+
+#ifndef PER_BIT_READ
+	ret = pb44_spi_rr(sp, SPI_REG_RDS);
+#endif
+	return ret;
+}
+
+static int pb44_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct ar71xx_spi *sp;
+	struct ar71xx_spi_platform_data *pdata;
+	struct resource	*r;
+	int ret;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "failed to allocate spi master\n");
+		return -ENOMEM;
+	}
+
+	sp = spi_master_get_devdata(master);
+	platform_set_drvdata(pdev, sp);
+
+	pdata = pdev->dev.platform_data;
+
+	master->setup = pb44_spi_setup;
+	master->cleanup = pb44_spi_cleanup;
+	if (pdata) {
+		master->bus_num = pdata->bus_num;
+		master->num_chipselect = pdata->num_chipselect;
+	} else {
+		master->bus_num = 0;
+		master->num_chipselect = 1;
+	}
+
+	sp->bitbang.master = spi_master_get(master);
+	sp->bitbang.chipselect = pb44_spi_chipselect;
+	sp->bitbang.txrx_word[SPI_MODE_0] = pb44_spi_txrx_mode0;
+	sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
+	sp->bitbang.flags = SPI_CS_HIGH;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		ret = -ENOENT;
+		goto err1;
+	}
+
+	sp->base = ioremap_nocache(r->start, r->end - r->start + 1);
+	if (!sp->base) {
+		ret = -ENXIO;
+		goto err1;
+	}
+
+	ret = spi_bitbang_start(&sp->bitbang);
+	if (!ret)
+		return 0;
+
+	iounmap(sp->base);
+ err1:
+	platform_set_drvdata(pdev, NULL);
+	spi_master_put(sp->bitbang.master);
+
+	return ret;
+}
+
+static int pb44_spi_remove(struct platform_device *pdev)
+{
+	struct ar71xx_spi *sp = platform_get_drvdata(pdev);
+
+	spi_bitbang_stop(&sp->bitbang);
+	iounmap(sp->base);
+	platform_set_drvdata(pdev, NULL);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+static struct platform_driver pb44_spi_drv = {
+	.probe		= pb44_spi_probe,
+	.remove		= pb44_spi_remove,
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init pb44_spi_init(void)
+{
+	return platform_driver_register(&pb44_spi_drv);
+}
+module_init(pb44_spi_init);
+
+static void __exit pb44_spi_exit(void)
+{
+	platform_driver_unregister(&pb44_spi_drv);
+}
+module_exit(pb44_spi_exit);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff -Nur linux-2.6.35.7.orig/drivers/spi/spi_vsc7385.c linux-2.6.35.7/drivers/spi/spi_vsc7385.c
--- linux-2.6.35.7.orig/drivers/spi/spi_vsc7385.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/spi/spi_vsc7385.c	2010-10-14 20:28:01.238101190 +0200
@@ -0,0 +1,620 @@
+/*
+ * SPI driver for the Vitesse VSC7385 ethernet switch
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Parts of this file are based on Atheros' 2.6.15 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/bitops.h>
+#include <linux/firmware.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/vsc7385.h>
+
+#define DRV_NAME	"spi-vsc7385"
+#define DRV_DESC	"Vitesse VSC7385 Gbit ethernet switch driver"
+#define DRV_VERSION	"0.1.0"
+
+#define VSC73XX_BLOCK_MAC	0x1
+#define VSC73XX_BLOCK_2		0x2
+#define VSC73XX_BLOCK_MII	0x3
+#define VSC73XX_BLOCK_4		0x4
+#define VSC73XX_BLOCK_5		0x5
+#define VSC73XX_BLOCK_SYSTEM	0x7
+
+#define VSC73XX_SUBBLOCK_PORT_0		0
+#define VSC73XX_SUBBLOCK_PORT_1		1
+#define VSC73XX_SUBBLOCK_PORT_2		2
+#define VSC73XX_SUBBLOCK_PORT_3		3
+#define VSC73XX_SUBBLOCK_PORT_4		4
+#define VSC73XX_SUBBLOCK_PORT_MAC	6
+
+/* MAC Block registers */
+#define VSC73XX_MAC_CFG		0x0
+#define VSC73XX_ADVPORTM	0x19
+#define VSC73XX_RXOCT		0x50
+#define VSC73XX_TXOCT		0x51
+#define VSC73XX_C_RX0		0x52
+#define VSC73XX_C_RX1		0x53
+#define VSC73XX_C_RX2		0x54
+#define VSC73XX_C_TX0		0x55
+#define VSC73XX_C_TX1		0x56
+#define VSC73XX_C_TX2		0x57
+#define VSC73XX_C_CFG		0x58
+
+/* MAC_CFG register bits */
+#define VSC73XX_MAC_CFG_WEXC_DIS	(1 << 31)
+#define VSC73XX_MAC_CFG_PORT_RST	(1 << 29)
+#define VSC73XX_MAC_CFG_TX_EN		(1 << 28)
+#define VSC73XX_MAC_CFG_SEED_LOAD      	(1 << 27)
+#define VSC73XX_MAC_CFG_FDX	        (1 << 18)
+#define VSC73XX_MAC_CFG_GIGE		(1 << 17)
+#define VSC73XX_MAC_CFG_RX_EN		(1 << 16)
+#define VSC73XX_MAC_CFG_VLAN_DBLAWR	(1 << 15)
+#define VSC73XX_MAC_CFG_VLAN_AWR	(1 << 14)
+#define VSC73XX_MAC_CFG_100_BASE_T	(1 << 13)
+#define VSC73XX_MAC_CFG_TX_IPG(x)	(((x) & 0x1f) << 6)
+#define VSC73XX_MAC_CFG_MAC_RX_RST	(1 << 5)
+#define VSC73XX_MAC_CFG_MAC_TX_RST	(1 << 4)
+#define VSC73XX_MAC_CFG_BIT2		(1 << 2)
+#define VSC73XX_MAC_CFG_CLK_SEL(x)	((x) & 0x3)
+
+/* ADVPORTM register bits */
+#define VSC73XX_ADVPORTM_IFG_PPM	(1 << 7)
+#define VSC73XX_ADVPORTM_EXC_COL_CONT	(1 << 6)
+#define VSC73XX_ADVPORTM_EXT_PORT	(1 << 5)
+#define VSC73XX_ADVPORTM_INV_GTX	(1 << 4)
+#define VSC73XX_ADVPORTM_ENA_GTX	(1 << 3)
+#define VSC73XX_ADVPORTM_DDR_MODE	(1 << 2)
+#define VSC73XX_ADVPORTM_IO_LOOPBACK	(1 << 1)
+#define VSC73XX_ADVPORTM_HOST_LOOPBACK	(1 << 0)
+
+/* MII Block registers */
+#define VSC73XX_MII_STAT	0x0
+#define VSC73XX_MII_CMD		0x1
+#define VSC73XX_MII_DATA	0x2
+
+/* System Block registers */
+#define VSC73XX_ICPU_SIPAD		0x01
+#define VSC73XX_ICPU_CLOCK_DELAY	0x05
+#define VSC73XX_ICPU_CTRL		0x10
+#define VSC73XX_ICPU_ADDR		0x11
+#define VSC73XX_ICPU_SRAM		0x12
+#define VSC73XX_ICPU_MBOX_VAL		0x15
+#define VSC73XX_ICPU_MBOX_SET		0x16
+#define VSC73XX_ICPU_MBOX_CLR		0x17
+#define VSC73XX_ICPU_CHIPID		0x18
+#define VSC73XX_ICPU_GPIO		0x34
+
+#define VSC73XX_ICPU_CTRL_CLK_DIV	(1 << 8)
+#define VSC73XX_ICPU_CTRL_SRST_HOLD	(1 << 7)
+#define VSC73XX_ICPU_CTRL_BOOT_EN	(1 << 3)
+#define VSC73XX_ICPU_CTRL_EXT_ACC_EN	(1 << 2)
+#define VSC73XX_ICPU_CTRL_CLK_EN	(1 << 1)
+#define VSC73XX_ICPU_CTRL_SRST		(1 << 0)
+
+#define VSC73XX_ICPU_CHIPID_ID_SHIFT	12
+#define VSC73XX_ICPU_CHIPID_ID_MASK	0xffff
+#define VSC73XX_ICPU_CHIPID_REV_SHIFT	28
+#define VSC73XX_ICPU_CHIPID_REV_MASK	0xf
+#define VSC73XX_ICPU_CHIPID_ID_7385	0x7385
+#define VSC73XX_ICPU_CHIPID_ID_7395	0x7395
+
+#define VSC73XX_CMD_MODE_READ		0
+#define VSC73XX_CMD_MODE_WRITE		1
+#define VSC73XX_CMD_MODE_SHIFT		4
+#define VSC73XX_CMD_BLOCK_SHIFT		5
+#define VSC73XX_CMD_BLOCK_MASK		0x7
+#define VSC73XX_CMD_SUBBLOCK_MASK	0xf
+
+#define VSC7385_CLOCK_DELAY		((3 << 4) | 3)
+#define VSC7385_CLOCK_DELAY_MASK	((3 << 4) | 3)
+
+#define VSC73XX_ICPU_CTRL_STOP	(VSC73XX_ICPU_CTRL_SRST_HOLD | \
+				 VSC73XX_ICPU_CTRL_BOOT_EN | \
+				 VSC73XX_ICPU_CTRL_EXT_ACC_EN)
+
+#define VSC73XX_ICPU_CTRL_START	(VSC73XX_ICPU_CTRL_CLK_DIV | \
+				 VSC73XX_ICPU_CTRL_BOOT_EN | \
+				 VSC73XX_ICPU_CTRL_CLK_EN | \
+				 VSC73XX_ICPU_CTRL_SRST)
+
+#define VSC7385_ADVPORTM_MASK	(VSC73XX_ADVPORTM_IFG_PPM | \
+				 VSC73XX_ADVPORTM_EXC_COL_CONT | \
+				 VSC73XX_ADVPORTM_EXT_PORT | \
+				 VSC73XX_ADVPORTM_INV_GTX | \
+				 VSC73XX_ADVPORTM_ENA_GTX | \
+				 VSC73XX_ADVPORTM_DDR_MODE | \
+				 VSC73XX_ADVPORTM_IO_LOOPBACK | \
+				 VSC73XX_ADVPORTM_HOST_LOOPBACK)
+
+#define VSC7385_ADVPORTM_INIT	(VSC73XX_ADVPORTM_EXT_PORT | \
+				 VSC73XX_ADVPORTM_ENA_GTX | \
+				 VSC73XX_ADVPORTM_DDR_MODE)
+
+#define VSC7385_MAC_CFG_RESET	(VSC73XX_MAC_CFG_PORT_RST | \
+				 VSC73XX_MAC_CFG_MAC_RX_RST | \
+				 VSC73XX_MAC_CFG_MAC_TX_RST)
+
+#define VSC73XX_MAC_CFG_INIT	(VSC73XX_MAC_CFG_TX_EN | \
+				 VSC73XX_MAC_CFG_FDX | \
+				 VSC73XX_MAC_CFG_GIGE | \
+				 VSC73XX_MAC_CFG_RX_EN)
+
+#define VSC73XX_RESET_DELAY	100
+
+struct vsc7385 {
+	struct spi_device		*spi;
+	struct mutex			lock;
+	struct vsc7385_platform_data	*pdata;
+};
+
+static int vsc7385_is_addr_valid(u8 block, u8 subblock)
+{
+	switch (block) {
+	case VSC73XX_BLOCK_MAC:
+		switch (subblock) {
+		case 0 ... 4:
+		case 6:
+			return 1;
+		}
+		break;
+
+	case VSC73XX_BLOCK_2:
+	case VSC73XX_BLOCK_SYSTEM:
+		switch (subblock) {
+		case 0:
+			return 1;
+		}
+		break;
+
+	case VSC73XX_BLOCK_MII:
+	case VSC73XX_BLOCK_4:
+	case VSC73XX_BLOCK_5:
+		switch (subblock) {
+		case 0 ... 1:
+			return 1;
+		}
+		break;
+	}
+
+	return 0;
+}
+
+static inline u8 vsc7385_make_addr(u8 mode, u8 block, u8 subblock)
+{
+	u8 ret;
+
+	ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT;
+	ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT;
+	ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK;
+
+	return ret;
+}
+
+static int vsc7385_read(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg,
+			u32 *value)
+{
+	u8 cmd[4];
+	u8 buf[4];
+	struct spi_transfer t[2];
+	struct spi_message m;
+	int err;
+
+	if (!vsc7385_is_addr_valid(block, subblock))
+		return -EINVAL;
+
+	spi_message_init(&m);
+
+	memset(&t, 0, sizeof(t));
+
+	t[0].tx_buf = cmd;
+	t[0].len = sizeof(cmd);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = buf;
+	t[1].len = sizeof(buf);
+	spi_message_add_tail(&t[1], &m);
+
+	cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_READ, block, subblock);
+	cmd[1] = reg;
+	cmd[2] = 0;
+	cmd[3] = 0;
+
+	mutex_lock(&vsc->lock);
+	err = spi_sync(vsc->spi, &m);
+	mutex_unlock(&vsc->lock);
+
+	if (err)
+		return err;
+
+	*value = (((u32) buf[0]) << 24) | (((u32) buf[1]) << 16) |
+		 (((u32) buf[2]) << 8) | ((u32) buf[3]);
+
+	return 0;
+}
+
+
+static int vsc7385_write(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg,
+			 u32 value)
+{
+	u8 cmd[2];
+	u8 buf[4];
+	struct spi_transfer t[2];
+	struct spi_message m;
+	int err;
+
+	if (!vsc7385_is_addr_valid(block, subblock))
+		return -EINVAL;
+
+	spi_message_init(&m);
+
+	memset(&t, 0, sizeof(t));
+
+	t[0].tx_buf = cmd;
+	t[0].len = sizeof(cmd);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	t[1].len = sizeof(buf);
+	spi_message_add_tail(&t[1], &m);
+
+	cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock);
+	cmd[1] = reg;
+
+	buf[0] = (value >> 24) & 0xff;
+	buf[1] = (value >> 16) & 0xff;
+	buf[2] = (value >> 8) & 0xff;
+	buf[3] = value & 0xff;
+
+	mutex_lock(&vsc->lock);
+	err = spi_sync(vsc->spi, &m);
+	mutex_unlock(&vsc->lock);
+
+	return err;
+}
+
+static inline int vsc7385_write_verify(struct vsc7385 *vsc, u8 block,
+				       u8 subblock, u8 reg, u32 value,
+				       u32 read_mask, u32 read_val)
+{
+	struct spi_device *spi = vsc->spi;
+	u32 t;
+	int err;
+
+	err = vsc7385_write(vsc, block, subblock, reg, value);
+	if (err)
+		return err;
+
+	err = vsc7385_read(vsc, block, subblock, reg, &t);
+	if (err)
+		return err;
+
+	if ((t & read_mask) != read_val) {
+		dev_err(&spi->dev, "register write error\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static inline int vsc7385_set_clock_delay(struct vsc7385 *vsc, u32 val)
+{
+	return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+			     VSC73XX_ICPU_CLOCK_DELAY, val);
+}
+
+static inline int vsc7385_get_clock_delay(struct vsc7385 *vsc, u32 *val)
+{
+	return vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+			    VSC73XX_ICPU_CLOCK_DELAY, val);
+}
+
+static inline int vsc7385_icpu_stop(struct vsc7385 *vsc)
+{
+	return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL,
+			     VSC73XX_ICPU_CTRL_STOP);
+}
+
+static inline int vsc7385_icpu_start(struct vsc7385 *vsc)
+{
+	return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL,
+			     VSC73XX_ICPU_CTRL_START);
+}
+
+static inline int vsc7385_icpu_reset(struct vsc7385 *vsc)
+{
+	int rc;
+
+	rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_ADDR,
+			   0x0000);
+	if (rc)
+		dev_err(&vsc->spi->dev,
+			"could not reset microcode, err=%d\n", rc);
+
+	return rc;
+}
+
+static int vsc7385_upload_ucode(struct vsc7385 *vsc)
+{
+	struct spi_device *spi = vsc->spi;
+	const struct firmware *firmware;
+	char *ucode_name;
+	unsigned char *dp;
+	unsigned int curVal;
+	int i;
+	int diffs;
+	int rc;
+
+	ucode_name = (vsc->pdata->ucode_name) ? vsc->pdata->ucode_name
+					      : "vsc7385_ucode.bin";
+	rc = request_firmware(&firmware, ucode_name, &spi->dev);
+	if (rc) {
+		dev_err(&spi->dev, "request_firmware failed, err=%d\n",
+			rc);
+		return rc;
+	}
+
+	rc = vsc7385_icpu_stop(vsc);
+	if (rc)
+		goto out;
+
+	rc = vsc7385_icpu_reset(vsc);
+	if (rc)
+		goto out;
+
+	dev_info(&spi->dev, "uploading microcode...\n");
+
+	dp = (unsigned char *) firmware->data;
+	for (i = 0; i < firmware->size; i++) {
+		rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+				   VSC73XX_ICPU_SRAM, *dp++);
+		if (rc) {
+			dev_err(&spi->dev, "could not load microcode, err=%d\n",
+				rc);
+			goto out;
+		}
+	}
+
+	rc = vsc7385_icpu_reset(vsc);
+	if (rc)
+		goto out;
+
+	dev_info(&spi->dev, "verifying microcode...\n");
+
+	dp = (unsigned char *) firmware->data;
+	diffs = 0;
+	for (i = 0; i < firmware->size; i++) {
+		rc = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+				  VSC73XX_ICPU_SRAM, &curVal);
+		if (rc) {
+			dev_err(&spi->dev, "could not read microcode %d\n",rc);
+			goto out;
+		}
+
+		if (curVal > 0xff) {
+			dev_err(&spi->dev, "bad val read: %04x : %02x  %02x\n",
+				i, *dp, curVal);
+			rc = -EIO;
+			goto out;
+		}
+
+		if ((curVal & 0xff) != *dp) {
+			diffs++;
+			dev_err(&spi->dev, "verify error: %04x : %02x  %02x\n",
+				i, *dp, curVal);
+
+			if (diffs > 4)
+				break;
+			}
+		dp++;
+	}
+
+	if (diffs) {
+		dev_err(&spi->dev, "microcode verification failed\n");
+		rc = -EIO;
+		goto out;
+	}
+
+	dev_info(&spi->dev, "microcode uploaded\n");
+
+	rc = vsc7385_icpu_start(vsc);
+
+ out:
+	release_firmware(firmware);
+	return rc;
+}
+
+static int vsc7385_setup(struct vsc7385 *vsc)
+{
+	struct vsc7385_platform_data *pdata = vsc->pdata;
+	u32 t;
+	int err;
+
+	err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+				   VSC73XX_ICPU_CLOCK_DELAY,
+				   VSC7385_CLOCK_DELAY,
+				   VSC7385_CLOCK_DELAY_MASK,
+				   VSC7385_CLOCK_DELAY);
+	if (err)
+		goto err;
+
+	err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_MAC,
+				   VSC73XX_SUBBLOCK_PORT_MAC, VSC73XX_ADVPORTM,
+				   VSC7385_ADVPORTM_INIT,
+				   VSC7385_ADVPORTM_MASK,
+				   VSC7385_ADVPORTM_INIT);
+	if (err)
+		goto err;
+
+	err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC,
+			    VSC73XX_MAC_CFG, VSC7385_MAC_CFG_RESET);
+	if (err)
+		goto err;
+
+	t = VSC73XX_MAC_CFG_INIT;
+	t |= VSC73XX_MAC_CFG_TX_IPG(pdata->mac_cfg.tx_ipg);
+	t |= VSC73XX_MAC_CFG_CLK_SEL(pdata->mac_cfg.clk_sel);
+	if (pdata->mac_cfg.bit2)
+		t |= VSC73XX_MAC_CFG_BIT2;
+
+	err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC,
+			    VSC73XX_MAC_CFG, t);
+	if (err)
+		goto err;
+
+	return 0;
+
+ err:
+	return err;
+}
+
+static int vsc7385_detect(struct vsc7385 *vsc)
+{
+	struct spi_device *spi = vsc->spi;
+	u32 t;
+	u32 id;
+	u32 rev;
+	int err;
+
+	err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+				VSC73XX_ICPU_MBOX_VAL, &t);
+	if (err) {
+		dev_err(&spi->dev, "unable to read mailbox, err=%d\n", err);
+		return err;
+	}
+
+	if (t == 0xffffffff) {
+		dev_dbg(&spi->dev, "assert chip reset\n");
+		if (vsc->pdata->reset)
+			vsc->pdata->reset();
+
+	}
+
+	err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
+				VSC73XX_ICPU_CHIPID, &t);
+	if (err) {
+		dev_err(&spi->dev, "unable to read chip id, err=%d\n", err);
+		return err;
+	}
+
+	id = (t >> VSC73XX_ICPU_CHIPID_ID_SHIFT) & VSC73XX_ICPU_CHIPID_ID_MASK;
+	switch (id) {
+	case VSC73XX_ICPU_CHIPID_ID_7385:
+	case VSC73XX_ICPU_CHIPID_ID_7395:
+		break;
+	default:
+		dev_err(&spi->dev, "unsupported chip, id=%04x\n", id);
+		return -ENODEV;
+	}
+
+	rev = (t >> VSC73XX_ICPU_CHIPID_REV_SHIFT) &
+	      VSC73XX_ICPU_CHIPID_REV_MASK;
+	dev_info(&spi->dev, "VSC%04X (rev. %d) switch found \n", id, rev);
+
+	return 0;
+}
+
+static int __devinit vsc7385_probe(struct spi_device *spi)
+{
+	struct vsc7385 *vsc;
+	struct vsc7385_platform_data *pdata;
+	int	err;
+
+	printk(KERN_INFO DRV_DESC " version " DRV_VERSION"\n");
+
+	pdata = spi->dev.platform_data;
+	if (!pdata) {
+		dev_err(&spi->dev, "no platform data specified\n");
+		return-ENODEV;
+	}
+
+	vsc = kzalloc(sizeof(*vsc), GFP_KERNEL);
+	if (!vsc) {
+		dev_err(&spi->dev, "no memory for private data\n");
+		return-ENOMEM;
+	}
+
+	mutex_init(&vsc->lock);
+	vsc->pdata = pdata;
+	vsc->spi = spi_dev_get(spi);
+	dev_set_drvdata(&spi->dev, vsc);
+
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 8;
+	err = spi_setup(spi);
+	if (err) {
+		dev_err(&spi->dev, "spi_setup failed, err=%d \n", err);
+		goto err_drvdata;
+	}
+
+	err = vsc7385_detect(vsc);
+	if (err) {
+		dev_err(&spi->dev, "no chip found, err=%d \n", err);
+		goto err_drvdata;
+	}
+
+	err = vsc7385_upload_ucode(vsc);
+	if (err)
+		goto err_drvdata;
+
+	err = vsc7385_setup(vsc);
+	if (err)
+		goto err_drvdata;
+
+	return 0;
+
+ err_drvdata:
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(vsc);
+	return err;
+}
+
+static int __devexit vsc7385_remove(struct spi_device *spi)
+{
+	struct vsc7385_data	*vsc;
+
+	vsc = dev_get_drvdata(&spi->dev);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(vsc);
+
+	return 0;
+}
+
+static struct spi_driver vsc7385_driver = {
+	.driver = {
+		.name		= DRV_NAME,
+		.bus		= &spi_bus_type,
+		.owner		= THIS_MODULE,
+	},
+	.probe		= vsc7385_probe,
+	.remove		= __devexit_p(vsc7385_remove),
+};
+
+static int __init vsc7385_init(void)
+{
+	return spi_register_driver(&vsc7385_driver);
+}
+module_init(vsc7385_init);
+
+static void __exit vsc7385_exit(void)
+{
+	spi_unregister_driver(&vsc7385_driver);
+}
+module_exit(vsc7385_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+
diff -Nur linux-2.6.35.7.orig/drivers/usb/host/ehci-ar71xx.c linux-2.6.35.7/drivers/usb/host/ehci-ar71xx.c
--- linux-2.6.35.7.orig/drivers/usb/host/ehci-ar71xx.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/usb/host/ehci-ar71xx.c	2010-10-14 20:28:01.285601150 +0200
@@ -0,0 +1,242 @@
+/*
+ *  Bus Glue for Atheros AR71xx built-in EHCI controller.
+ *
+ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *	Copyright (C) 2007 Atheros Communications, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ar71xx/platform.h>
+
+extern int usb_disabled(void);
+
+static int ehci_ar71xx_init(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int ret;
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs +
+			HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	ehci->sbrn = 0x20;
+	ehci->has_synopsys_hc_bug = 1;
+
+	ehci_reset(ehci);
+
+	ret = ehci_init(hcd);
+	if (ret)
+		return ret;
+
+	ehci_port_power(ehci, 0);
+
+	return 0;
+}
+
+static int ehci_ar91xx_init(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int ret;
+
+	ehci->caps = hcd->regs + 0x100;
+	ehci->regs = hcd->regs + 0x100 +
+			HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	hcd->has_tt = 1;
+	ehci->sbrn = 0x20;
+
+	ehci_reset(ehci);
+
+	ret = ehci_init(hcd);
+	if (ret)
+		return ret;
+
+	ehci_port_power(ehci, 0);
+
+	return 0;
+}
+
+static int ehci_ar71xx_probe(const struct hc_driver *driver,
+			     struct usb_hcd **hcd_out,
+			     struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int irq;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_dbg(&pdev->dev, "no IRQ specified for %s\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_dbg(&pdev->dev, "no base address specified for %s\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start	= res->start;
+	hcd->rsrc_len	= res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		ret = -EBUSY;
+		goto err_put_hcd;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		ret = -EFAULT;
+		goto err_release_region;
+	}
+
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (ret)
+		goto err_iounmap;
+
+	return 0;
+
+ err_iounmap:
+	iounmap(hcd->regs);
+
+ err_release_region:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ err_put_hcd:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static void ehci_ar71xx_remove(struct usb_hcd *hcd,
+			       struct platform_device *pdev)
+{
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+static const struct hc_driver ehci_ar71xx_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "Atheros AR71xx built-in EHCI controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	.reset			= ehci_ar71xx_init,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	.get_frame_number	= ehci_get_frame,
+
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#ifdef CONFIG_PM
+	.hub_suspend		= ehci_hub_suspend,
+	.hub_resume		= ehci_hub_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static const struct hc_driver ehci_ar91xx_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "Atheros AR91xx built-in EHCI controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	.reset			= ehci_ar91xx_init,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	.get_frame_number	= ehci_get_frame,
+
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#ifdef CONFIG_PM
+	.hub_suspend		= ehci_hub_suspend,
+	.hub_resume		= ehci_hub_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_ar71xx_driver_probe(struct platform_device *pdev)
+{
+	struct ar71xx_ehci_platform_data *pdata;
+	struct usb_hcd *hcd = NULL;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data specified for %s\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+
+	if (pdata->is_ar91xx)
+		ret = ehci_ar71xx_probe(&ehci_ar91xx_hc_driver, &hcd, pdev);
+	else
+		ret = ehci_ar71xx_probe(&ehci_ar71xx_hc_driver, &hcd, pdev);
+
+	return ret;
+}
+
+static int ehci_ar71xx_driver_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	ehci_ar71xx_remove(hcd, pdev);
+	return 0;
+}
+
+MODULE_ALIAS("platform:ar71xx-ehci");
+
+static struct platform_driver ehci_ar71xx_driver = {
+	.probe		= ehci_ar71xx_driver_probe,
+	.remove		= ehci_ar71xx_driver_remove,
+	.driver = {
+		.name	= "ar71xx-ehci",
+	}
+};
diff -Nur linux-2.6.35.7.orig/drivers/usb/host/ehci-hcd.c linux-2.6.35.7/drivers/usb/host/ehci-hcd.c
--- linux-2.6.35.7.orig/drivers/usb/host/ehci-hcd.c	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/usb/host/ehci-hcd.c	2010-10-14 20:28:01.328100455 +0200
@@ -1158,6 +1158,11 @@
 #define	PLATFORM_DRIVER		ehci_atmel_driver
 #endif
 
+#ifdef CONFIG_USB_EHCI_AR71XX
+#include "ehci-ar71xx.c"
+#define PLATFORM_DRIVER		ehci_ar71xx_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff -Nur linux-2.6.35.7.orig/drivers/usb/host/ehci-hcd.c.orig linux-2.6.35.7/drivers/usb/host/ehci-hcd.c.orig
--- linux-2.6.35.7.orig/drivers/usb/host/ehci-hcd.c.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/usb/host/ehci-hcd.c.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,1278 @@
+/*
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/ktime.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * EHCI hc_driver implementation ... experimental, incomplete.
+ * Based on the final 1.0 register interface specification.
+ *
+ * USB 2.0 shows up in upcoming www.pcmcia.org technology.
+ * First was PCMCIA, like ISA; then CardBus, which is PCI.
+ * Next comes "CardBay", using USB 2.0 signals.
+ *
+ * Contains additional contributions by Brad Hards, Rory Bolt, and others.
+ * Special thanks to Intel and VIA for providing host controllers to
+ * test this driver on, and Cypress (including In-System Design) for
+ * providing early devices for those host controllers to talk to!
+ */
+
+#define DRIVER_AUTHOR "David Brownell"
+#define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver"
+
+static const char	hcd_name [] = "ehci_hcd";
+
+
+#undef VERBOSE_DEBUG
+#undef EHCI_URB_TRACE
+
+#ifdef DEBUG
+#define EHCI_STATS
+#endif
+
+/* magic numbers that can affect system performance */
+#define	EHCI_TUNE_CERR		3	/* 0-3 qtd retries; 0 == don't stop */
+#define	EHCI_TUNE_RL_HS		4	/* nak throttle; see 4.9 */
+#define	EHCI_TUNE_RL_TT		0
+#define	EHCI_TUNE_MULT_HS	1	/* 1-3 transactions/uframe; 4.10.3 */
+#define	EHCI_TUNE_MULT_TT	1
+#define	EHCI_TUNE_FLS		2	/* (small) 256 frame schedule */
+
+#define EHCI_IAA_MSECS		10		/* arbitrary */
+#define EHCI_IO_JIFFIES		(HZ/10)		/* io watchdog > irq_thresh */
+#define EHCI_ASYNC_JIFFIES	(HZ/20)		/* async idle timeout */
+#define EHCI_SHRINK_FRAMES	5		/* async qh unlink delay */
+
+/* Initial IRQ latency:  faster than hw default */
+static int log2_irq_thresh = 0;		// 0 to 6
+module_param (log2_irq_thresh, int, S_IRUGO);
+MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
+
+/* initial park setting:  slower than hw default */
+static unsigned park = 0;
+module_param (park, uint, S_IRUGO);
+MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
+
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc = 0;
+module_param (ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+
+#define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
+
+/*-------------------------------------------------------------------------*/
+
+#include "ehci.h"
+#include "ehci-dbg.c"
+
+/*-------------------------------------------------------------------------*/
+
+static void
+timer_action(struct ehci_hcd *ehci, enum ehci_timer_action action)
+{
+	/* Don't override timeouts which shrink or (later) disable
+	 * the async ring; just the I/O watchdog.  Note that if a
+	 * SHRINK were pending, OFF would never be requested.
+	 */
+	if (timer_pending(&ehci->watchdog)
+			&& ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+				& ehci->actions))
+		return;
+
+	if (!test_and_set_bit(action, &ehci->actions)) {
+		unsigned long t;
+
+		switch (action) {
+		case TIMER_IO_WATCHDOG:
+			if (!ehci->need_io_watchdog)
+				return;
+			t = EHCI_IO_JIFFIES;
+			break;
+		case TIMER_ASYNC_OFF:
+			t = EHCI_ASYNC_JIFFIES;
+			break;
+		/* case TIMER_ASYNC_SHRINK: */
+		default:
+			/* add a jiffie since we synch against the
+			 * 8 KHz uframe counter.
+			 */
+			t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
+			break;
+		}
+		mod_timer(&ehci->watchdog, t + jiffies);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done).  There are two failure modes:  "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ *
+ * That last failure should_only happen in cases like physical cardbus eject
+ * before driver shutdown. But it also seems to be caused by bugs in cardbus
+ * bridge shutdown:  shutting down the bridge before the devices using it.
+ */
+static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
+		      u32 mask, u32 done, int usec)
+{
+	u32	result;
+
+	do {
+		result = ehci_readl(ehci, ptr);
+		if (result == ~(u32)0)		/* card removed */
+			return -ENODEV;
+		result &= mask;
+		if (result == done)
+			return 0;
+		udelay (1);
+		usec--;
+	} while (usec > 0);
+	return -ETIMEDOUT;
+}
+
+/* force HC to halt state from unknown (EHCI spec section 2.3) */
+static int ehci_halt (struct ehci_hcd *ehci)
+{
+	u32	temp = ehci_readl(ehci, &ehci->regs->status);
+
+	/* disable any irqs left enabled by previous code */
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+
+	if ((temp & STS_HALT) != 0)
+		return 0;
+
+	temp = ehci_readl(ehci, &ehci->regs->command);
+	temp &= ~CMD_RUN;
+	ehci_writel(ehci, temp, &ehci->regs->command);
+	return handshake (ehci, &ehci->regs->status,
+			  STS_HALT, STS_HALT, 16 * 125);
+}
+
+static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
+				       u32 mask, u32 done, int usec)
+{
+	int error;
+
+	error = handshake(ehci, ptr, mask, done, usec);
+	if (error) {
+		ehci_halt(ehci);
+		ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+		ehci_err(ehci, "force halt; handshake %p %08x %08x -> %d\n",
+			ptr, mask, done, error);
+	}
+
+	return error;
+}
+
+/* put TDI/ARC silicon into EHCI mode */
+static void tdi_reset (struct ehci_hcd *ehci)
+{
+	u32 __iomem	*reg_ptr;
+	u32		tmp;
+
+	reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE);
+	tmp = ehci_readl(ehci, reg_ptr);
+	tmp |= USBMODE_CM_HC;
+	/* The default byte access to MMR space is LE after
+	 * controller reset. Set the required endian mode
+	 * for transfer buffers to match the host microprocessor
+	 */
+	if (ehci_big_endian_mmio(ehci))
+		tmp |= USBMODE_BE;
+	ehci_writel(ehci, tmp, reg_ptr);
+}
+
+/* reset a non-running (STS_HALT == 1) controller */
+static int ehci_reset (struct ehci_hcd *ehci)
+{
+	int	retval;
+	u32	command = ehci_readl(ehci, &ehci->regs->command);
+
+	/* If the EHCI debug controller is active, special care must be
+	 * taken before and after a host controller reset */
+	if (ehci->debug && !dbgp_reset_prep())
+		ehci->debug = NULL;
+
+	command |= CMD_RESET;
+	dbg_cmd (ehci, "reset", command);
+	ehci_writel(ehci, command, &ehci->regs->command);
+	ehci_to_hcd(ehci)->state = HC_STATE_HALT;
+	ehci->next_statechange = jiffies;
+	retval = handshake (ehci, &ehci->regs->command,
+			    CMD_RESET, 0, 250 * 1000);
+
+	if (ehci->has_hostpc) {
+		ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS,
+			(u32 __iomem *)(((u8 *)ehci->regs) + USBMODE_EX));
+		ehci_writel(ehci, TXFIFO_DEFAULT,
+			(u32 __iomem *)(((u8 *)ehci->regs) + TXFILLTUNING));
+	}
+	if (retval)
+		return retval;
+
+	if (ehci_is_TDI(ehci))
+		tdi_reset (ehci);
+
+	if (ehci->debug)
+		dbgp_external_startup();
+
+	return retval;
+}
+
+/* idle the controller (from running) */
+static void ehci_quiesce (struct ehci_hcd *ehci)
+{
+	u32	temp;
+
+#ifdef DEBUG
+	if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+		BUG ();
+#endif
+
+	/* wait for any schedule enables/disables to take effect */
+	temp = ehci_readl(ehci, &ehci->regs->command) << 10;
+	temp &= STS_ASS | STS_PSS;
+	if (handshake_on_error_set_halt(ehci, &ehci->regs->status,
+					STS_ASS | STS_PSS, temp, 16 * 125))
+		return;
+
+	/* then disable anything that's still active */
+	temp = ehci_readl(ehci, &ehci->regs->command);
+	temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE);
+	ehci_writel(ehci, temp, &ehci->regs->command);
+
+	/* hardware can take 16 microframes to turn off ... */
+	handshake_on_error_set_halt(ehci, &ehci->regs->status,
+				    STS_ASS | STS_PSS, 0, 16 * 125);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void end_unlink_async(struct ehci_hcd *ehci);
+static void ehci_work(struct ehci_hcd *ehci);
+
+#include "ehci-hub.c"
+#include "ehci-mem.c"
+#include "ehci-q.c"
+#include "ehci-sched.c"
+
+/*-------------------------------------------------------------------------*/
+
+static void ehci_iaa_watchdog(unsigned long param)
+{
+	struct ehci_hcd		*ehci = (struct ehci_hcd *) param;
+	unsigned long		flags;
+
+	spin_lock_irqsave (&ehci->lock, flags);
+
+	/* Lost IAA irqs wedge things badly; seen first with a vt8235.
+	 * So we need this watchdog, but must protect it against both
+	 * (a) SMP races against real IAA firing and retriggering, and
+	 * (b) clean HC shutdown, when IAA watchdog was pending.
+	 */
+	if (ehci->reclaim
+			&& !timer_pending(&ehci->iaa_watchdog)
+			&& HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+		u32 cmd, status;
+
+		/* If we get here, IAA is *REALLY* late.  It's barely
+		 * conceivable that the system is so busy that CMD_IAAD
+		 * is still legitimately set, so let's be sure it's
+		 * clear before we read STS_IAA.  (The HC should clear
+		 * CMD_IAAD when it sets STS_IAA.)
+		 */
+		cmd = ehci_readl(ehci, &ehci->regs->command);
+		if (cmd & CMD_IAAD)
+			ehci_writel(ehci, cmd & ~CMD_IAAD,
+					&ehci->regs->command);
+
+		/* If IAA is set here it either legitimately triggered
+		 * before we cleared IAAD above (but _way_ late, so we'll
+		 * still count it as lost) ... or a silicon erratum:
+		 * - VIA seems to set IAA without triggering the IRQ;
+		 * - IAAD potentially cleared without setting IAA.
+		 */
+		status = ehci_readl(ehci, &ehci->regs->status);
+		if ((status & STS_IAA) || !(cmd & CMD_IAAD)) {
+			COUNT (ehci->stats.lost_iaa);
+			ehci_writel(ehci, STS_IAA, &ehci->regs->status);
+		}
+
+		ehci_vdbg(ehci, "IAA watchdog: status %x cmd %x\n",
+				status, cmd);
+		end_unlink_async(ehci);
+	}
+
+	spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static void ehci_watchdog(unsigned long param)
+{
+	struct ehci_hcd		*ehci = (struct ehci_hcd *) param;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&ehci->lock, flags);
+
+	/* stop async processing after it's idled a bit */
+	if (test_bit (TIMER_ASYNC_OFF, &ehci->actions))
+		start_unlink_async (ehci, ehci->async);
+
+	/* ehci could run by timer, without IRQs ... */
+	ehci_work (ehci);
+
+	spin_unlock_irqrestore (&ehci->lock, flags);
+}
+
+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
+ * The firmware seems to think that powering off is a wakeup event!
+ * This routine turns off remote wakeup and everything else, on all ports.
+ */
+static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
+{
+	int	port = HCS_N_PORTS(ehci->hcs_params);
+
+	while (port--)
+		ehci_writel(ehci, PORT_RWC_BITS,
+				&ehci->regs->port_status[port]);
+}
+
+/*
+ * Halt HC, turn off all ports, and let the BIOS use the companion controllers.
+ * Should be called with ehci->lock held.
+ */
+static void ehci_silence_controller(struct ehci_hcd *ehci)
+{
+	ehci_halt(ehci);
+	ehci_turn_off_all_ports(ehci);
+
+	/* make BIOS/etc use companion controller during reboot */
+	ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+
+	/* unblock posted writes */
+	ehci_readl(ehci, &ehci->regs->configured_flag);
+}
+
+/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
+ */
+static void ehci_shutdown(struct usb_hcd *hcd)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+
+	del_timer_sync(&ehci->watchdog);
+	del_timer_sync(&ehci->iaa_watchdog);
+
+	spin_lock_irq(&ehci->lock);
+	ehci_silence_controller(ehci);
+	spin_unlock_irq(&ehci->lock);
+}
+
+static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
+{
+	unsigned port;
+
+	if (!HCS_PPC (ehci->hcs_params))
+		return;
+
+	ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down");
+	for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; )
+		(void) ehci_hub_control(ehci_to_hcd(ehci),
+				is_on ? SetPortFeature : ClearPortFeature,
+				USB_PORT_FEAT_POWER,
+				port--, NULL, 0);
+	/* Flush those writes */
+	ehci_readl(ehci, &ehci->regs->command);
+	msleep(20);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ehci_work is called from some interrupts, timers, and so on.
+ * it calls driver completion functions, after dropping ehci->lock.
+ */
+static void ehci_work (struct ehci_hcd *ehci)
+{
+	timer_action_done (ehci, TIMER_IO_WATCHDOG);
+
+	/* another CPU may drop ehci->lock during a schedule scan while
+	 * it reports urb completions.  this flag guards against bogus
+	 * attempts at re-entrant schedule scanning.
+	 */
+	if (ehci->scanning)
+		return;
+	ehci->scanning = 1;
+	scan_async (ehci);
+	if (ehci->next_uframe != -1)
+		scan_periodic (ehci);
+	ehci->scanning = 0;
+
+	/* the IO watchdog guards against hardware or driver bugs that
+	 * misplace IRQs, and should let us run completely without IRQs.
+	 * such lossage has been observed on both VT6202 and VT8235.
+	 */
+	if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
+			(ehci->async->qh_next.ptr != NULL ||
+			 ehci->periodic_sched != 0))
+		timer_action (ehci, TIMER_IO_WATCHDOG);
+}
+
+/*
+ * Called when the ehci_hcd module is removed.
+ */
+static void ehci_stop (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+
+	ehci_dbg (ehci, "stop\n");
+
+	/* no more interrupts ... */
+	del_timer_sync (&ehci->watchdog);
+	del_timer_sync(&ehci->iaa_watchdog);
+
+	spin_lock_irq(&ehci->lock);
+	if (HC_IS_RUNNING (hcd->state))
+		ehci_quiesce (ehci);
+
+	ehci_silence_controller(ehci);
+	ehci_reset (ehci);
+	spin_unlock_irq(&ehci->lock);
+
+	remove_companion_file(ehci);
+	remove_debug_files (ehci);
+
+	/* root hub is shut down separately (first, when possible) */
+	spin_lock_irq (&ehci->lock);
+	if (ehci->async)
+		ehci_work (ehci);
+	spin_unlock_irq (&ehci->lock);
+	ehci_mem_cleanup (ehci);
+
+#ifdef	EHCI_STATS
+	ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
+		ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
+		ehci->stats.lost_iaa);
+	ehci_dbg (ehci, "complete %ld unlink %ld\n",
+		ehci->stats.complete, ehci->stats.unlink);
+#endif
+
+	dbg_status (ehci, "ehci_stop completed",
+		    ehci_readl(ehci, &ehci->regs->status));
+}
+
+/* one-time init, only for memory state */
+static int ehci_init(struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	u32			temp;
+	int			retval;
+	u32			hcc_params;
+	struct ehci_qh_hw	*hw;
+
+	spin_lock_init(&ehci->lock);
+
+	/*
+	 * keep io watchdog by default, those good HCDs could turn off it later
+	 */
+	ehci->need_io_watchdog = 1;
+	init_timer(&ehci->watchdog);
+	ehci->watchdog.function = ehci_watchdog;
+	ehci->watchdog.data = (unsigned long) ehci;
+
+	init_timer(&ehci->iaa_watchdog);
+	ehci->iaa_watchdog.function = ehci_iaa_watchdog;
+	ehci->iaa_watchdog.data = (unsigned long) ehci;
+
+	/*
+	 * hw default: 1K periodic list heads, one per frame.
+	 * periodic_size can shrink by USBCMD update if hcc_params allows.
+	 */
+	ehci->periodic_size = DEFAULT_I_TDPS;
+	INIT_LIST_HEAD(&ehci->cached_itd_list);
+	INIT_LIST_HEAD(&ehci->cached_sitd_list);
+	if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
+		return retval;
+
+	/* controllers may cache some of the periodic schedule ... */
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+	if (HCC_ISOC_CACHE(hcc_params))		// full frame cache
+		ehci->i_thresh = 2 + 8;
+	else					// N microframes cached
+		ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
+
+	ehci->reclaim = NULL;
+	ehci->next_uframe = -1;
+	ehci->clock_frame = -1;
+
+	/*
+	 * dedicate a qh for the async ring head, since we couldn't unlink
+	 * a 'real' qh without stopping the async schedule [4.8].  use it
+	 * as the 'reclamation list head' too.
+	 * its dummy is used in hw_alt_next of many tds, to prevent the qh
+	 * from automatically advancing to the next td after short reads.
+	 */
+	ehci->async->qh_next.qh = NULL;
+	hw = ehci->async->hw;
+	hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
+	hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+	hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
+	hw->hw_qtd_next = EHCI_LIST_END(ehci);
+	ehci->async->qh_state = QH_STATE_LINKED;
+	hw->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma);
+
+	/* clear interrupt enables, set irq latency */
+	if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
+		log2_irq_thresh = 0;
+	temp = 1 << (16 + log2_irq_thresh);
+	if (HCC_CANPARK(hcc_params)) {
+		/* HW default park == 3, on hardware that supports it (like
+		 * NVidia and ALI silicon), maximizes throughput on the async
+		 * schedule by avoiding QH fetches between transfers.
+		 *
+		 * With fast usb storage devices and NForce2, "park" seems to
+		 * make problems:  throughput reduction (!), data errors...
+		 */
+		if (park) {
+			park = min(park, (unsigned) 3);
+			temp |= CMD_PARK;
+			temp |= park << 8;
+		}
+		ehci_dbg(ehci, "park %d\n", park);
+	}
+	if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
+		/* periodic schedule size can be smaller than default */
+		temp &= ~(3 << 2);
+		temp |= (EHCI_TUNE_FLS << 2);
+		switch (EHCI_TUNE_FLS) {
+		case 0: ehci->periodic_size = 1024; break;
+		case 1: ehci->periodic_size = 512; break;
+		case 2: ehci->periodic_size = 256; break;
+		default:	BUG();
+		}
+	}
+	ehci->command = temp;
+
+	/* Accept arbitrarily long scatter-gather lists */
+	hcd->self.sg_tablesize = ~0;
+	return 0;
+}
+
+/* start HC running; it's halted, ehci_init() has been run (once) */
+static int ehci_run (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	int			retval;
+	u32			temp;
+	u32			hcc_params;
+
+	hcd->uses_new_polling = 1;
+	hcd->poll_rh = 0;
+
+	/* EHCI spec section 4.1 */
+	if ((retval = ehci_reset(ehci)) != 0) {
+		ehci_mem_cleanup(ehci);
+		return retval;
+	}
+	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+	ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
+
+	/*
+	 * hcc_params controls whether ehci->regs->segment must (!!!)
+	 * be used; it constrains QH/ITD/SITD and QTD locations.
+	 * pci_pool consistent memory always uses segment zero.
+	 * streaming mappings for I/O buffers, like pci_map_single(),
+	 * can return segments above 4GB, if the device allows.
+	 *
+	 * NOTE:  the dma mask is visible through dma_supported(), so
+	 * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+	 * Scsi_Host.highmem_io, and so forth.  It's readonly to all
+	 * host side drivers though.
+	 */
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+	if (HCC_64BIT_ADDR(hcc_params)) {
+		ehci_writel(ehci, 0, &ehci->regs->segment);
+#if 0
+// this is deeply broken on almost all architectures
+		if (!dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)))
+			ehci_info(ehci, "enabled 64bit DMA\n");
+#endif
+	}
+
+
+	// Philips, Intel, and maybe others need CMD_RUN before the
+	// root hub will detect new devices (why?); NEC doesn't
+	ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+	ehci->command |= CMD_RUN;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	dbg_cmd (ehci, "init", ehci->command);
+
+	/*
+	 * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
+	 * are explicitly handed to companion controller(s), so no TT is
+	 * involved with the root hub.  (Except where one is integrated,
+	 * and there's no companion controller unless maybe for USB OTG.)
+	 *
+	 * Turning on the CF flag will transfer ownership of all ports
+	 * from the companions to the EHCI controller.  If any of the
+	 * companions are in the middle of a port reset at the time, it
+	 * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
+	 * guarantees that no resets are in progress.  After we set CF,
+	 * a short delay lets the hardware catch up; new resets shouldn't
+	 * be started before the port switching actions could complete.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+	hcd->state = HC_STATE_RUNNING;
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+	msleep(5);
+	up_write(&ehci_cf_port_reset_rwsem);
+	ehci->last_periodic_enable = ktime_get_real();
+
+	temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci_info (ehci,
+		"USB %x.%x started, EHCI %x.%02x%s\n",
+		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+		temp >> 8, temp & 0xff,
+		ignore_oc ? ", overcurrent ignored" : "");
+
+	ehci_writel(ehci, INTR_MASK,
+		    &ehci->regs->intr_enable); /* Turn On Interrupts */
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	create_debug_files(ehci);
+	create_companion_file(ehci);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t ehci_irq (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	u32			status, masked_status, pcd_status = 0, cmd;
+	int			bh;
+
+	spin_lock (&ehci->lock);
+
+	status = ehci_readl(ehci, &ehci->regs->status);
+
+	/* e.g. cardbus physical eject */
+	if (status == ~(u32) 0) {
+		ehci_dbg (ehci, "device removed\n");
+		goto dead;
+	}
+
+	masked_status = status & INTR_MASK;
+	if (!masked_status) {		/* irq sharing? */
+		spin_unlock(&ehci->lock);
+		return IRQ_NONE;
+	}
+
+	/* clear (just) interrupts */
+	ehci_writel(ehci, masked_status, &ehci->regs->status);
+	cmd = ehci_readl(ehci, &ehci->regs->command);
+	bh = 0;
+
+#ifdef	VERBOSE_DEBUG
+	/* unrequested/ignored: Frame List Rollover */
+	dbg_status (ehci, "irq", status);
+#endif
+
+	/* INT, ERR, and IAA interrupt rates can be throttled */
+
+	/* normal [4.15.1.2] or error [4.15.1.1] completion */
+	if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
+		if (likely ((status & STS_ERR) == 0))
+			COUNT (ehci->stats.normal);
+		else
+			COUNT (ehci->stats.error);
+		bh = 1;
+	}
+
+	/* complete the unlinking of some qh [4.15.2.3] */
+	if (status & STS_IAA) {
+		/* guard against (alleged) silicon errata */
+		if (cmd & CMD_IAAD) {
+			ehci_writel(ehci, cmd & ~CMD_IAAD,
+					&ehci->regs->command);
+			ehci_dbg(ehci, "IAA with IAAD still set?\n");
+		}
+		if (ehci->reclaim) {
+			COUNT(ehci->stats.reclaim);
+			end_unlink_async(ehci);
+		} else
+			ehci_dbg(ehci, "IAA with nothing to reclaim?\n");
+	}
+
+	/* remote wakeup [4.3.1] */
+	if (status & STS_PCD) {
+		unsigned	i = HCS_N_PORTS (ehci->hcs_params);
+
+		/* kick root hub later */
+		pcd_status = status;
+
+		/* resume root hub? */
+		if (!(cmd & CMD_RUN))
+			usb_hcd_resume_root_hub(hcd);
+
+		while (i--) {
+			int pstatus = ehci_readl(ehci,
+						 &ehci->regs->port_status [i]);
+
+			if (pstatus & PORT_OWNER)
+				continue;
+			if (!(test_bit(i, &ehci->suspended_ports) &&
+					((pstatus & PORT_RESUME) ||
+						!(pstatus & PORT_SUSPEND)) &&
+					(pstatus & PORT_PE) &&
+					ehci->reset_done[i] == 0))
+				continue;
+
+			/* start 20 msec resume signaling from this port,
+			 * and make khubd collect PORT_STAT_C_SUSPEND to
+			 * stop that signaling.  Use 5 ms extra for safety,
+			 * like usb_port_resume() does.
+			 */
+			ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
+			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
+			mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
+		}
+	}
+
+	/* PCI errors [4.15.2.4] */
+	if (unlikely ((status & STS_FATAL) != 0)) {
+		ehci_err(ehci, "fatal error\n");
+		dbg_cmd(ehci, "fatal", cmd);
+		dbg_status(ehci, "fatal", status);
+		ehci_halt(ehci);
+dead:
+		ehci_reset(ehci);
+		ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+		/* generic layer kills/unlinks all urbs, then
+		 * uses ehci_stop to clean up the rest
+		 */
+		bh = 1;
+	}
+
+	if (bh)
+		ehci_work (ehci);
+	spin_unlock (&ehci->lock);
+	if (pcd_status)
+		usb_hcd_poll_rh_status(hcd);
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ *
+ * urb + dev is in hcd.self.controller.urb_list
+ * we're queueing TDs onto software and hardware lists
+ *
+ * hcd-specific init for hcpriv hasn't been done yet
+ *
+ * NOTE:  control, bulk, and interrupt share the same code to append TDs
+ * to a (possibly active) QH, and the same QH scanning code.
+ */
+static int ehci_urb_enqueue (
+	struct usb_hcd	*hcd,
+	struct urb	*urb,
+	gfp_t		mem_flags
+) {
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	struct list_head	qtd_list;
+
+	INIT_LIST_HEAD (&qtd_list);
+
+	switch (usb_pipetype (urb->pipe)) {
+	case PIPE_CONTROL:
+		/* qh_completions() code doesn't handle all the fault cases
+		 * in multi-TD control transfers.  Even 1KB is rare anyway.
+		 */
+		if (urb->transfer_buffer_length > (16 * 1024))
+			return -EMSGSIZE;
+		/* FALLTHROUGH */
+	/* case PIPE_BULK: */
+	default:
+		if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
+			return -ENOMEM;
+		return submit_async(ehci, urb, &qtd_list, mem_flags);
+
+	case PIPE_INTERRUPT:
+		if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
+			return -ENOMEM;
+		return intr_submit(ehci, urb, &qtd_list, mem_flags);
+
+	case PIPE_ISOCHRONOUS:
+		if (urb->dev->speed == USB_SPEED_HIGH)
+			return itd_submit (ehci, urb, mem_flags);
+		else
+			return sitd_submit (ehci, urb, mem_flags);
+	}
+}
+
+static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
+{
+	/* failfast */
+	if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state) && ehci->reclaim)
+		end_unlink_async(ehci);
+
+	/* If the QH isn't linked then there's nothing we can do
+	 * unless we were called during a giveback, in which case
+	 * qh_completions() has to deal with it.
+	 */
+	if (qh->qh_state != QH_STATE_LINKED) {
+		if (qh->qh_state == QH_STATE_COMPLETING)
+			qh->needs_rescan = 1;
+		return;
+	}
+
+	/* defer till later if busy */
+	if (ehci->reclaim) {
+		struct ehci_qh		*last;
+
+		for (last = ehci->reclaim;
+				last->reclaim;
+				last = last->reclaim)
+			continue;
+		qh->qh_state = QH_STATE_UNLINK_WAIT;
+		last->reclaim = qh;
+
+	/* start IAA cycle */
+	} else
+		start_unlink_async (ehci, qh);
+}
+
+/* remove from hardware lists
+ * completions normally happen asynchronously
+ */
+
+static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	struct ehci_qh		*qh;
+	unsigned long		flags;
+	int			rc;
+
+	spin_lock_irqsave (&ehci->lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc)
+		goto done;
+
+	switch (usb_pipetype (urb->pipe)) {
+	// case PIPE_CONTROL:
+	// case PIPE_BULK:
+	default:
+		qh = (struct ehci_qh *) urb->hcpriv;
+		if (!qh)
+			break;
+		switch (qh->qh_state) {
+		case QH_STATE_LINKED:
+		case QH_STATE_COMPLETING:
+			unlink_async(ehci, qh);
+			break;
+		case QH_STATE_UNLINK:
+		case QH_STATE_UNLINK_WAIT:
+			/* already started */
+			break;
+		case QH_STATE_IDLE:
+			/* QH might be waiting for a Clear-TT-Buffer */
+			qh_completions(ehci, qh);
+			break;
+		}
+		break;
+
+	case PIPE_INTERRUPT:
+		qh = (struct ehci_qh *) urb->hcpriv;
+		if (!qh)
+			break;
+		switch (qh->qh_state) {
+		case QH_STATE_LINKED:
+		case QH_STATE_COMPLETING:
+			intr_deschedule (ehci, qh);
+			break;
+		case QH_STATE_IDLE:
+			qh_completions (ehci, qh);
+			break;
+		default:
+			ehci_dbg (ehci, "bogus qh %p state %d\n",
+					qh, qh->qh_state);
+			goto done;
+		}
+		break;
+
+	case PIPE_ISOCHRONOUS:
+		// itd or sitd ...
+
+		// wait till next completion, do it then.
+		// completion irqs can wait up to 1024 msec,
+		break;
+	}
+done:
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+
+// bulk qh holds the data toggle
+
+static void
+ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	unsigned long		flags;
+	struct ehci_qh		*qh, *tmp;
+
+	/* ASSERT:  any requests/urbs are being unlinked */
+	/* ASSERT:  nobody can be submitting urbs for this any more */
+
+rescan:
+	spin_lock_irqsave (&ehci->lock, flags);
+	qh = ep->hcpriv;
+	if (!qh)
+		goto done;
+
+	/* endpoints can be iso streams.  for now, we don't
+	 * accelerate iso completions ... so spin a while.
+	 */
+	if (qh->hw == NULL) {
+		ehci_vdbg (ehci, "iso delay\n");
+		goto idle_timeout;
+	}
+
+	if (!HC_IS_RUNNING (hcd->state))
+		qh->qh_state = QH_STATE_IDLE;
+	switch (qh->qh_state) {
+	case QH_STATE_LINKED:
+	case QH_STATE_COMPLETING:
+		for (tmp = ehci->async->qh_next.qh;
+				tmp && tmp != qh;
+				tmp = tmp->qh_next.qh)
+			continue;
+		/* periodic qh self-unlinks on empty */
+		if (!tmp)
+			goto nogood;
+		unlink_async (ehci, qh);
+		/* FALL THROUGH */
+	case QH_STATE_UNLINK:		/* wait for hw to finish? */
+	case QH_STATE_UNLINK_WAIT:
+idle_timeout:
+		spin_unlock_irqrestore (&ehci->lock, flags);
+		schedule_timeout_uninterruptible(1);
+		goto rescan;
+	case QH_STATE_IDLE:		/* fully unlinked */
+		if (qh->clearing_tt)
+			goto idle_timeout;
+		if (list_empty (&qh->qtd_list)) {
+			qh_put (qh);
+			break;
+		}
+		/* else FALL THROUGH */
+	default:
+nogood:
+		/* caller was supposed to have unlinked any requests;
+		 * that's not our job.  just leak this memory.
+		 */
+		ehci_err (ehci, "qh %p (#%02x) state %d%s\n",
+			qh, ep->desc.bEndpointAddress, qh->qh_state,
+			list_empty (&qh->qtd_list) ? "" : "(has tds)");
+		break;
+	}
+	ep->hcpriv = NULL;
+done:
+	spin_unlock_irqrestore (&ehci->lock, flags);
+	return;
+}
+
+static void
+ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	struct ehci_qh		*qh;
+	int			eptype = usb_endpoint_type(&ep->desc);
+	int			epnum = usb_endpoint_num(&ep->desc);
+	int			is_out = usb_endpoint_dir_out(&ep->desc);
+	unsigned long		flags;
+
+	if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
+		return;
+
+	spin_lock_irqsave(&ehci->lock, flags);
+	qh = ep->hcpriv;
+
+	/* For Bulk and Interrupt endpoints we maintain the toggle state
+	 * in the hardware; the toggle bits in udev aren't used at all.
+	 * When an endpoint is reset by usb_clear_halt() we must reset
+	 * the toggle bit in the QH.
+	 */
+	if (qh) {
+		usb_settoggle(qh->dev, epnum, is_out, 0);
+		if (!list_empty(&qh->qtd_list)) {
+			WARN_ONCE(1, "clear_halt for a busy endpoint\n");
+		} else if (qh->qh_state == QH_STATE_LINKED ||
+				qh->qh_state == QH_STATE_COMPLETING) {
+
+			/* The toggle value in the QH can't be updated
+			 * while the QH is active.  Unlink it now;
+			 * re-linking will call qh_refresh().
+			 */
+			if (eptype == USB_ENDPOINT_XFER_BULK)
+				unlink_async(ehci, qh);
+			else
+				intr_deschedule(ehci, qh);
+		}
+	}
+	spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static int ehci_get_frame (struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
+	return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) %
+		ehci->periodic_size;
+}
+
+/*-------------------------------------------------------------------------*/
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR (DRIVER_AUTHOR);
+MODULE_LICENSE ("GPL");
+
+#ifdef CONFIG_PCI
+#include "ehci-pci.c"
+#define	PCI_DRIVER		ehci_pci_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_FSL
+#include "ehci-fsl.c"
+#define	PLATFORM_DRIVER		ehci_fsl_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_MXC
+#include "ehci-mxc.c"
+#define PLATFORM_DRIVER		ehci_mxc_driver
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+#include "ehci-au1xxx.c"
+#define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+#include "ehci-omap.c"
+#define        PLATFORM_DRIVER         ehci_hcd_omap_driver
+#endif
+
+#ifdef CONFIG_PPC_PS3
+#include "ehci-ps3.c"
+#define	PS3_SYSTEM_BUS_DRIVER	ps3_ehci_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
+#include "ehci-ppc-of.c"
+#define OF_PLATFORM_DRIVER	ehci_hcd_ppc_of_driver
+#endif
+
+#ifdef CONFIG_XPS_USB_HCD_XILINX
+#include "ehci-xilinx-of.c"
+#define XILINX_OF_PLATFORM_DRIVER	ehci_hcd_xilinx_of_driver
+#endif
+
+#ifdef CONFIG_PLAT_ORION
+#include "ehci-orion.c"
+#define	PLATFORM_DRIVER		ehci_orion_driver
+#endif
+
+#ifdef CONFIG_ARCH_IXP4XX
+#include "ehci-ixp4xx.c"
+#define	PLATFORM_DRIVER		ixp4xx_ehci_driver
+#endif
+
+#ifdef CONFIG_USB_W90X900_EHCI
+#include "ehci-w90x900.c"
+#define	PLATFORM_DRIVER		ehci_hcd_w90x900_driver
+#endif
+
+#ifdef CONFIG_ARCH_AT91
+#include "ehci-atmel.c"
+#define	PLATFORM_DRIVER		ehci_atmel_driver
+#endif
+
+#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+    !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
+    !defined(XILINX_OF_PLATFORM_DRIVER)
+#error "missing bus glue for ehci-hcd"
+#endif
+
+static int __init ehci_hcd_init(void)
+{
+	int retval = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
+	set_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+	if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) ||
+			test_bit(USB_OHCI_LOADED, &usb_hcds_loaded))
+		printk(KERN_WARNING "Warning! ehci_hcd should always be loaded"
+				" before uhci_hcd and ohci_hcd, not after\n");
+
+	pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
+		 hcd_name,
+		 sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
+		 sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
+
+#ifdef DEBUG
+	ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root);
+	if (!ehci_debug_root) {
+		retval = -ENOENT;
+		goto err_debug;
+	}
+#endif
+
+#ifdef PLATFORM_DRIVER
+	retval = platform_driver_register(&PLATFORM_DRIVER);
+	if (retval < 0)
+		goto clean0;
+#endif
+
+#ifdef PCI_DRIVER
+	retval = pci_register_driver(&PCI_DRIVER);
+	if (retval < 0)
+		goto clean1;
+#endif
+
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
+	if (retval < 0)
+		goto clean2;
+#endif
+
+#ifdef OF_PLATFORM_DRIVER
+	retval = of_register_platform_driver(&OF_PLATFORM_DRIVER);
+	if (retval < 0)
+		goto clean3;
+#endif
+
+#ifdef XILINX_OF_PLATFORM_DRIVER
+	retval = of_register_platform_driver(&XILINX_OF_PLATFORM_DRIVER);
+	if (retval < 0)
+		goto clean4;
+#endif
+	return retval;
+
+#ifdef XILINX_OF_PLATFORM_DRIVER
+	/* of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER); */
+clean4:
+#endif
+#ifdef OF_PLATFORM_DRIVER
+	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
+clean3:
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+clean2:
+#endif
+#ifdef PCI_DRIVER
+	pci_unregister_driver(&PCI_DRIVER);
+clean1:
+#endif
+#ifdef PLATFORM_DRIVER
+	platform_driver_unregister(&PLATFORM_DRIVER);
+clean0:
+#endif
+#ifdef DEBUG
+	debugfs_remove(ehci_debug_root);
+	ehci_debug_root = NULL;
+err_debug:
+#endif
+	clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+	return retval;
+}
+module_init(ehci_hcd_init);
+
+static void __exit ehci_hcd_cleanup(void)
+{
+#ifdef XILINX_OF_PLATFORM_DRIVER
+	of_unregister_platform_driver(&XILINX_OF_PLATFORM_DRIVER);
+#endif
+#ifdef OF_PLATFORM_DRIVER
+	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
+#endif
+#ifdef PLATFORM_DRIVER
+	platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+#ifdef PCI_DRIVER
+	pci_unregister_driver(&PCI_DRIVER);
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+#endif
+#ifdef DEBUG
+	debugfs_remove(ehci_debug_root);
+#endif
+	clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
+}
+module_exit(ehci_hcd_cleanup);
+
diff -Nur linux-2.6.35.7.orig/drivers/usb/host/Kconfig linux-2.6.35.7/drivers/usb/host/Kconfig
--- linux-2.6.35.7.orig/drivers/usb/host/Kconfig	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/usb/host/Kconfig	2010-10-14 20:28:01.385601136 +0200
@@ -109,6 +109,13 @@
 		support both high speed and full speed devices, or high speed
 		devices only.
 
+config USB_EHCI_AR71XX
+	bool "USB EHCI support for AR71xx"
+	depends on USB_EHCI_HCD && ATHEROS_AR71XX
+	default y
+	help
+	  Support for Atheros AR71xx built-in EHCI controller
+
 config USB_EHCI_FSL
 	bool "Support for Freescale on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && FSL_SOC
@@ -222,6 +229,13 @@
 	  Enables support for the on-chip OHCI controller on
 	  OMAP3 and later chips.
 
+config USB_OHCI_AR71XX
+	bool "USB OHCI support for Atheros AR71xx"
+	depends on USB_OHCI_HCD && ATHEROS_AR71XX
+	default y
+	help
+	  Support for Atheros AR71xx built-in OHCI controller
+
 config USB_OHCI_HCD_PPC_SOC
 	bool "OHCI support for on-chip PPC USB controller"
 	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
diff -Nur linux-2.6.35.7.orig/drivers/usb/host/Kconfig.orig linux-2.6.35.7/drivers/usb/host/Kconfig.orig
--- linux-2.6.35.7.orig/drivers/usb/host/Kconfig.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/usb/host/Kconfig.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,427 @@
+#
+# USB Host Controller Drivers
+#
+comment "USB Host Controller Drivers"
+	depends on USB
+
+config USB_C67X00_HCD
+	tristate "Cypress C67x00 HCD support"
+	depends on USB
+	help
+	  The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
+	  host/peripheral/OTG USB controllers.
+
+	  Enable this option to support this chip in host controller mode.
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called c67x00.
+
+config USB_XHCI_HCD
+	tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)"
+	depends on USB && PCI && EXPERIMENTAL
+	---help---
+	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
+	  "SuperSpeed" host controller hardware.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xhci-hcd.
+
+config USB_XHCI_HCD_DEBUGGING
+	bool "Debugging for the xHCI host controller"
+	depends on USB_XHCI_HCD
+	---help---
+	  Say 'Y' to turn on debugging for the xHCI host controller driver.
+	  This will spew debugging output, even in interrupt context.
+	  This should only be used for debugging xHCI driver bugs.
+
+	  If unsure, say N.
+
+config USB_EHCI_HCD
+	tristate "EHCI HCD (USB 2.0) support"
+	depends on USB && USB_ARCH_HAS_EHCI
+	---help---
+	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
+	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
+	  If your USB host controller supports USB 2.0, you will likely want to
+	  configure this Host Controller Driver.
+
+	  EHCI controllers are packaged with "companion" host controllers (OHCI
+	  or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
+	  will connect to EHCI if the device is high speed, otherwise they
+	  connect to a companion controller.  If you configure EHCI, you should
+	  probably configure the OHCI (for NEC and some other vendors) USB Host
+	  Controller Driver or UHCI (for Via motherboards) Host Controller
+	  Driver too.
+
+	  You may want to read <file:Documentation/usb/ehci.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ehci-hcd.
+
+config USB_EHCI_ROOT_HUB_TT
+	bool "Root Hub Transaction Translators"
+	depends on USB_EHCI_HCD
+	---help---
+	  Some EHCI chips have vendor-specific extensions to integrate
+	  transaction translators, so that no OHCI or UHCI companion
+	  controller is needed.  It's safe to say "y" even if your
+	  controller doesn't support this feature.
+
+	  This supports the EHCI implementation that's originally
+	  from ARC, and has since changed hands a few times.
+
+config USB_EHCI_TT_NEWSCHED
+	bool "Improved Transaction Translator scheduling (EXPERIMENTAL)"
+	depends on USB_EHCI_HCD && EXPERIMENTAL
+	---help---
+	  This changes the periodic scheduling code to fill more of the low
+	  and full speed bandwidth available from the Transaction Translator
+	  (TT) in USB 2.0 hubs.  Without this, only one transfer will be
+	  issued in each microframe, significantly reducing the number of
+	  periodic low/fullspeed transfers possible.
+
+	  If you have multiple periodic low/fullspeed devices connected to a
+	  highspeed USB hub which is connected to a highspeed USB Host
+	  Controller, and some of those devices will not work correctly
+	  (possibly due to "ENOSPC" or "-28" errors), say Y.
+
+	  If unsure, say N.
+
+config USB_EHCI_BIG_ENDIAN_MMIO
+	bool
+	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX)
+	default y
+
+config USB_EHCI_BIG_ENDIAN_DESC
+	bool
+	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX)
+	default y
+
+config XPS_USB_HCD_XILINX
+	bool "Use Xilinx usb host EHCI controller core"
+	depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE)
+	select USB_EHCI_BIG_ENDIAN_DESC
+	select USB_EHCI_BIG_ENDIAN_MMIO
+	---help---
+		Xilinx xps USB host controller core is EHCI compilant and has
+		transaction translator built-in. It can be configured to either
+		support both high speed and full speed devices, or high speed
+		devices only.
+
+config USB_EHCI_FSL
+	bool "Support for Freescale on-chip EHCI USB controller"
+	depends on USB_EHCI_HCD && FSL_SOC
+	select USB_EHCI_ROOT_HUB_TT
+	---help---
+	  Variation of ARC USB block used in some Freescale chips.
+
+config USB_EHCI_MXC
+	bool "Support for Freescale on-chip EHCI USB controller"
+	depends on USB_EHCI_HCD && ARCH_MXC
+	select USB_EHCI_ROOT_HUB_TT
+	---help---
+	  Variation of ARC USB block used in some Freescale chips.
+
+config USB_EHCI_HCD_PPC_OF
+	bool "EHCI support for PPC USB controller on OF platform bus"
+	depends on USB_EHCI_HCD && PPC_OF
+	default y
+	---help---
+	  Enables support for the USB controller present on the PowerPC
+	  OpenFirmware platform bus.
+
+config USB_W90X900_EHCI
+	bool "W90X900(W90P910) EHCI support"
+	depends on USB_EHCI_HCD && ARCH_W90X900
+	---help---
+		Enables support for the W90X900 USB controller
+
+config USB_OXU210HP_HCD
+	tristate "OXU210HP HCD support"
+	depends on USB
+	---help---
+	  The OXU210HP is an USB host/OTG/device controller. Enable this
+	  option if your board has this chip. If unsure, say N.
+
+	  This driver does not support isochronous transfers and doesn't
+	  implement OTG nor USB device controllers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called oxu210hp-hcd.
+
+config USB_ISP116X_HCD
+	tristate "ISP116X HCD support"
+	depends on USB
+	---help---
+	  The ISP1160 and ISP1161 chips are USB host controllers. Enable this
+	  option if your board has this chip. If unsure, say N.
+
+	  This driver does not support isochronous transfers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp116x-hcd.
+
+config USB_ISP1760_HCD
+	tristate "ISP 1760 HCD support"
+	depends on USB && EXPERIMENTAL
+	---help---
+	  The ISP1760 chip is a USB 2.0 host controller.
+
+	  This driver does not support isochronous transfers or OTG.
+	  This USB controller is usually attached to a non-DMA-Master
+	  capable bus. NXP's eval kit brings this chip on PCI card
+	  where the chip itself is behind a PLB to simulate such
+	  a bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1760.
+
+config USB_ISP1362_HCD
+	tristate "ISP1362 HCD support"
+	depends on USB
+	default N
+	---help---
+	  Supports the Philips ISP1362 chip as a host controller
+
+	  This driver does not support isochronous transfers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1362-hcd.
+
+config USB_OHCI_HCD
+	tristate "OHCI HCD support"
+	depends on USB && USB_ARCH_HAS_OHCI
+	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+	select USB_OTG_UTILS if ARCH_OMAP
+	---help---
+	  The Open Host Controller Interface (OHCI) is a standard for accessing
+	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
+	  UHCI specification.  If your USB host controller follows the OHCI spec,
+	  say Y.  On most non-x86 systems, and on x86 hardware that's not using a
+	  USB controller from Intel or VIA, this is appropriate.  If your host
+	  controller doesn't use PCI, this is probably appropriate.  For a PCI
+	  based system where you're not sure, the "lspci -v" entry will list the
+	  right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ohci-hcd.
+
+config USB_OHCI_HCD_OMAP1
+	bool "OHCI support for OMAP1/2 chips"
+	depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2)
+	default y
+	---help---
+	  Enables support for the OHCI controller on OMAP1/2 chips.
+
+config USB_OHCI_HCD_OMAP3
+	bool "OHCI support for OMAP3 and later chips"
+	depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4)
+	default y
+	---help---
+	  Enables support for the on-chip OHCI controller on
+	  OMAP3 and later chips.
+
+config USB_OHCI_HCD_PPC_SOC
+	bool "OHCI support for on-chip PPC USB controller"
+	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+	default y
+	select USB_OHCI_BIG_ENDIAN_DESC
+	select USB_OHCI_BIG_ENDIAN_MMIO
+	---help---
+	  Enables support for the USB controller on the MPC52xx or
+	  STB03xxx processor chip.  If unsure, say Y.
+
+config USB_OHCI_HCD_PPC_OF_BE
+	bool "OHCI support for OF platform bus (big endian)"
+	depends on USB_OHCI_HCD && PPC_OF
+	select USB_OHCI_BIG_ENDIAN_DESC
+	select USB_OHCI_BIG_ENDIAN_MMIO
+	---help---
+	  Enables support for big-endian USB controllers present on the
+	  OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF_LE
+	bool "OHCI support for OF platform bus (little endian)"
+	depends on USB_OHCI_HCD && PPC_OF
+	select USB_OHCI_LITTLE_ENDIAN
+	---help---
+	  Enables support for little-endian USB controllers present on the
+	  OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+	bool
+	depends on USB_OHCI_HCD && PPC_OF
+	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
+
+config USB_OHCI_HCD_PCI
+	bool "OHCI support for PCI-bus USB controllers"
+	depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
+	default y
+	select USB_OHCI_LITTLE_ENDIAN
+	---help---
+	  Enables support for PCI-bus plug-in USB controller cards.
+	  If unsure, say Y.
+
+config USB_OHCI_HCD_SSB
+	bool "OHCI support for Broadcom SSB OHCI core"
+	depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
+	default n
+	---help---
+	  Support for the Sonics Silicon Backplane (SSB) attached
+	  Broadcom USB OHCI core.
+
+	  This device is present in some embedded devices with
+	  Broadcom based SSB bus.
+
+	  If unsure, say N.
+
+config USB_OHCI_BIG_ENDIAN_DESC
+	bool
+	depends on USB_OHCI_HCD
+	default n
+
+config USB_OHCI_BIG_ENDIAN_MMIO
+	bool
+	depends on USB_OHCI_HCD
+	default n
+
+config USB_OHCI_LITTLE_ENDIAN
+	bool
+	depends on USB_OHCI_HCD
+	default n if STB03xxx || PPC_MPC52xx
+	default y
+
+config USB_UHCI_HCD
+	tristate "UHCI HCD (most Intel and VIA) support"
+	depends on USB && PCI
+	---help---
+	  The Universal Host Controller Interface is a standard by Intel for
+	  accessing the USB hardware in the PC (which is also called the USB
+	  host controller). If your USB host controller conforms to this
+	  standard, you may want to say Y, but see below. All recent boards
+	  with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
+	  i810, i820) conform to this standard. Also all VIA PCI chipsets
+	  (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
+	  133). If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called uhci-hcd.
+
+config USB_FHCI_HCD
+	tristate "Freescale QE USB Host Controller support"
+	depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
+	select FSL_GTM
+	select QE_USB
+	help
+	  This driver enables support for Freescale QE USB Host Controller
+	  (as found on MPC8360 and MPC8323 processors), the driver supports
+	  Full and Low Speed USB.
+
+config FHCI_DEBUG
+	bool "Freescale QE USB Host Controller debug support"
+	depends on USB_FHCI_HCD && DEBUG_FS
+	help
+	  Say "y" to see some FHCI debug information and statistics
+	  throught debugfs.
+
+config USB_U132_HCD
+	tristate "Elan U132 Adapter Host Controller"
+	depends on USB && USB_FTDI_ELAN
+	default M
+	help
+	  The U132 adapter is a USB to CardBus adapter specifically designed
+	  for PC cards that contain an OHCI host controller. Typical PC cards
+	  are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
+	  adapter will *NOT* work with PC cards that do not contain an OHCI
+	  controller.
+
+	  For those PC cards that contain multiple OHCI controllers only the
+	  first one is used.
+
+	  The driver consists of two modules, the "ftdi-elan" module is a
+	  USB client driver that interfaces to the FTDI chip within ELAN's
+	  USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
+	  controller driver that talks to the OHCI controller within the
+	  CardBus cards that are inserted in the U132 adapter.
+
+	  This driver has been tested with a CardBus OHCI USB adapter, and
+	  worked with a USB PEN Drive inserted into the first USB port of
+	  the PCCARD. A rather pointless thing to do, but useful for testing.
+
+	  It is safe to say M here.
+
+	  See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
+
+config USB_SL811_HCD
+	tristate "SL811HS HCD support"
+	depends on USB
+	help
+	  The SL811HS is a single-port USB controller that supports either
+	  host side or peripheral side roles.  Enable this option if your
+	  board has this chip, and you want to use it as a host controller. 
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sl811-hcd.
+
+config USB_SL811_CS
+	tristate "CF/PCMCIA support for SL811HS HCD"
+	depends on USB_SL811_HCD && PCMCIA
+	help
+	  Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
+	  REX-CFU1U CF card (often used with PDAs).  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called "sl811_cs".
+
+config USB_R8A66597_HCD
+	tristate "R8A66597 HCD support"
+	depends on USB
+	help
+	  The R8A66597 is a USB 2.0 host and peripheral controller.
+
+	  Enable this option if your board has this chip, and you want
+	  to use it as a host controller.  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called r8a66597-hcd.
+
+config USB_WHCI_HCD
+	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on PCI && USB
+	select USB_WUSB
+	select UWB_WHCI
+	help
+	  A driver for PCI-based Wireless USB Host Controllers that are
+	  compliant with the WHCI specification.
+
+	  To compile this driver a module, choose M here: the module
+	  will be called "whci-hcd".
+
+config USB_HWA_HCD
+	tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on USB
+	select USB_WUSB
+	select UWB_HWA
+	help
+	  This driver enables you to connect Wireless USB devices to
+	  your system using a Host Wire Adaptor USB dongle. This is an
+	  UWB Radio Controller and WUSB Host Controller connected to
+	  your machine via USB (specified in WUSB1.0).
+
+	  To compile this driver a module, choose M here: the module
+	  will be called "hwa-hc".
+
+config USB_IMX21_HCD
+       tristate "iMX21 HCD support"
+       depends on USB && ARM && MACH_MX21
+       help
+         This driver enables support for the on-chip USB host in the
+         iMX21 processor.
+
+         To compile this driver as a module, choose M here: the
+         module will be called "imx21-hcd".
+
diff -Nur linux-2.6.35.7.orig/drivers/usb/host/ohci-ar71xx.c linux-2.6.35.7/drivers/usb/host/ohci-ar71xx.c
--- linux-2.6.35.7.orig/drivers/usb/host/ohci-ar71xx.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/usb/host/ohci-ar71xx.c	2010-10-14 20:28:01.428101246 +0200
@@ -0,0 +1,165 @@
+/*
+ *  OHCI HCD (Host Controller Driver) for USB.
+ *
+ *  Bus Glue for Atheros AR71xx built-in OHCI controller.
+ *
+ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  Parts of this file are based on Atheros' 2.6.15 BSP
+ *	Copyright (C) 2007 Atheros Communications, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+extern int usb_disabled(void);
+
+static int usb_hcd_ar71xx_probe(const struct hc_driver *driver,
+				struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int irq;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_dbg(&pdev->dev, "no IRQ specified for %s\n",
+			dev_name(&pdev->dev));
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_dbg(&pdev->dev, "no base address specified for %s\n",
+			dev_name(&pdev->dev));
+		ret = -ENODEV;
+		goto err_put_hcd;
+	}
+	hcd->rsrc_start	= res->start;
+	hcd->rsrc_len	= res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		ret = -EBUSY;
+		goto err_put_hcd;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		ret = -EFAULT;
+		goto err_release_region;
+	}
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	if (ret)
+		goto err_stop_hcd;
+
+	return 0;
+
+ err_stop_hcd:
+	iounmap(hcd->regs);
+ err_release_region:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ err_put_hcd:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+void usb_hcd_ar71xx_remove(struct usb_hcd *hcd, struct platform_device *pdev)
+{
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+static int __devinit ohci_ar71xx_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	ret = ohci_init(ohci);
+	if (ret < 0)
+		return ret;
+
+	ret = ohci_run(ohci);
+	if (ret < 0)
+		goto err;
+
+	return 0;
+
+ err:
+	ohci_stop(hcd);
+	return ret;
+}
+
+static const struct hc_driver ohci_ar71xx_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "Atheros AR71xx built-in OHCI controller",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+
+	.start			= ohci_ar71xx_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+static int ohci_hcd_ar71xx_drv_probe(struct platform_device *pdev)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	return usb_hcd_ar71xx_probe(&ohci_ar71xx_hc_driver, pdev);
+}
+
+static int ohci_hcd_ar71xx_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_hcd_ar71xx_remove(hcd, pdev);
+	return 0;
+}
+
+MODULE_ALIAS("platform:ar71xx-ohci");
+
+static struct platform_driver ohci_hcd_ar71xx_driver = {
+	.probe		= ohci_hcd_ar71xx_drv_probe,
+	.remove		= ohci_hcd_ar71xx_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "ar71xx-ohci",
+		.owner	= THIS_MODULE,
+	},
+};
diff -Nur linux-2.6.35.7.orig/drivers/usb/host/ohci-hcd.c linux-2.6.35.7/drivers/usb/host/ohci-hcd.c
--- linux-2.6.35.7.orig/drivers/usb/host/ohci-hcd.c	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/usb/host/ohci-hcd.c	2010-10-14 20:28:01.468101083 +0200
@@ -1095,6 +1095,11 @@
 #define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
 #endif
 
+#ifdef CONFIG_USB_OHCI_AR71XX
+#include "ohci-ar71xx.c"
+#define PLATFORM_DRIVER		ohci_hcd_ar71xx_driver
+#endif
+
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OMAP1_PLATFORM_DRIVER) &&	\
diff -Nur linux-2.6.35.7.orig/drivers/usb/host/ohci-hcd.c.orig linux-2.6.35.7/drivers/usb/host/ohci-hcd.c.orig
--- linux-2.6.35.7.orig/drivers/usb/host/ohci-hcd.c.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/usb/host/ohci-hcd.c.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,1277 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * [ Initialisation is based on Linus'  ]
+ * [ uhci code and gregs ohci fragments ]
+ * [ (C) Copyright 1999 Linus Torvalds  ]
+ * [ (C) Copyright 1999 Gregory P. Smith]
+ *
+ *
+ * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
+ * interfaces (though some non-x86 Intel chips use it).  It supports
+ * smarter hardware than UHCI.  A download link for the spec available
+ * through the http://www.usb.org website.
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/hcd.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+
+#define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
+#define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
+
+/*-------------------------------------------------------------------------*/
+
+#undef OHCI_VERBOSE_DEBUG	/* not always helpful */
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define	OHCI_CONTROL_INIT	OHCI_CTRL_CBSR
+#define	OHCI_INTR_INIT \
+		(OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \
+		| OHCI_INTR_RD | OHCI_INTR_WDH)
+
+#ifdef __hppa__
+/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
+#define	IR_DISABLE
+#endif
+
+#ifdef CONFIG_ARCH_OMAP
+/* OMAP doesn't support IR (no SMM; not needed) */
+#define	IR_DISABLE
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static const char	hcd_name [] = "ohci_hcd";
+
+#define	STATECHANGE_DELAY	msecs_to_jiffies(300)
+
+#include "ohci.h"
+
+static void ohci_dump (struct ohci_hcd *ohci, int verbose);
+static int ohci_init (struct ohci_hcd *ohci);
+static void ohci_stop (struct usb_hcd *hcd);
+
+#if defined(CONFIG_PM) || defined(CONFIG_PCI)
+static int ohci_restart (struct ohci_hcd *ohci);
+#endif
+
+#ifdef CONFIG_PCI
+static void quirk_amd_pll(int state);
+static void amd_iso_dev_put(void);
+static void sb800_prefetch(struct ohci_hcd *ohci, int on);
+#else
+static inline void quirk_amd_pll(int state)
+{
+	return;
+}
+static inline void amd_iso_dev_put(void)
+{
+	return;
+}
+static inline void sb800_prefetch(struct ohci_hcd *ohci, int on)
+{
+	return;
+}
+#endif
+
+
+#include "ohci-hub.c"
+#include "ohci-dbg.c"
+#include "ohci-mem.c"
+#include "ohci-q.c"
+
+
+/*
+ * On architectures with edge-triggered interrupts we must never return
+ * IRQ_NONE.
+ */
+#if defined(CONFIG_SA1111)  /* ... or other edge-triggered systems */
+#define IRQ_NOTMINE	IRQ_HANDLED
+#else
+#define IRQ_NOTMINE	IRQ_NONE
+#endif
+
+
+/* Some boards misreport power switching/overcurrent */
+static int distrust_firmware = 1;
+module_param (distrust_firmware, bool, 0);
+MODULE_PARM_DESC (distrust_firmware,
+	"true to distrust firmware power/overcurrent setup");
+
+/* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
+static int no_handshake = 0;
+module_param (no_handshake, bool, 0);
+MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * queue up an urb for anything except the root hub
+ */
+static int ohci_urb_enqueue (
+	struct usb_hcd	*hcd,
+	struct urb	*urb,
+	gfp_t		mem_flags
+) {
+	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
+	struct ed	*ed;
+	urb_priv_t	*urb_priv;
+	unsigned int	pipe = urb->pipe;
+	int		i, size = 0;
+	unsigned long	flags;
+	int		retval = 0;
+
+#ifdef OHCI_VERBOSE_DEBUG
+	urb_print(urb, "SUB", usb_pipein(pipe), -EINPROGRESS);
+#endif
+
+	/* every endpoint has a ed, locate and maybe (re)initialize it */
+	if (! (ed = ed_get (ohci, urb->ep, urb->dev, pipe, urb->interval)))
+		return -ENOMEM;
+
+	/* for the private part of the URB we need the number of TDs (size) */
+	switch (ed->type) {
+		case PIPE_CONTROL:
+			/* td_submit_urb() doesn't yet handle these */
+			if (urb->transfer_buffer_length > 4096)
+				return -EMSGSIZE;
+
+			/* 1 TD for setup, 1 for ACK, plus ... */
+			size = 2;
+			/* FALLTHROUGH */
+		// case PIPE_INTERRUPT:
+		// case PIPE_BULK:
+		default:
+			/* one TD for every 4096 Bytes (can be upto 8K) */
+			size += urb->transfer_buffer_length / 4096;
+			/* ... and for any remaining bytes ... */
+			if ((urb->transfer_buffer_length % 4096) != 0)
+				size++;
+			/* ... and maybe a zero length packet to wrap it up */
+			if (size == 0)
+				size++;
+			else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+				&& (urb->transfer_buffer_length
+					% usb_maxpacket (urb->dev, pipe,
+						usb_pipeout (pipe))) == 0)
+				size++;
+			break;
+		case PIPE_ISOCHRONOUS: /* number of packets from URB */
+			size = urb->number_of_packets;
+			break;
+	}
+
+	/* allocate the private part of the URB */
+	urb_priv = kzalloc (sizeof (urb_priv_t) + size * sizeof (struct td *),
+			mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+	INIT_LIST_HEAD (&urb_priv->pending);
+	urb_priv->length = size;
+	urb_priv->ed = ed;
+
+	/* allocate the TDs (deferring hash chain updates) */
+	for (i = 0; i < size; i++) {
+		urb_priv->td [i] = td_alloc (ohci, mem_flags);
+		if (!urb_priv->td [i]) {
+			urb_priv->length = i;
+			urb_free_priv (ohci, urb_priv);
+			return -ENOMEM;
+		}
+	}
+
+	spin_lock_irqsave (&ohci->lock, flags);
+
+	/* don't submit to a dead HC */
+	if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+		retval = -ENODEV;
+		goto fail;
+	}
+	if (!HC_IS_RUNNING(hcd->state)) {
+		retval = -ENODEV;
+		goto fail;
+	}
+	retval = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (retval)
+		goto fail;
+
+	/* schedule the ed if needed */
+	if (ed->state == ED_IDLE) {
+		retval = ed_schedule (ohci, ed);
+		if (retval < 0) {
+			usb_hcd_unlink_urb_from_ep(hcd, urb);
+			goto fail;
+		}
+		if (ed->type == PIPE_ISOCHRONOUS) {
+			u16	frame = ohci_frame_no(ohci);
+
+			/* delay a few frames before the first TD */
+			frame += max_t (u16, 8, ed->interval);
+			frame &= ~(ed->interval - 1);
+			frame |= ed->branch;
+			urb->start_frame = frame;
+
+			/* yes, only URB_ISO_ASAP is supported, and
+			 * urb->start_frame is never used as input.
+			 */
+		}
+	} else if (ed->type == PIPE_ISOCHRONOUS)
+		urb->start_frame = ed->last_iso + ed->interval;
+
+	/* fill the TDs and link them to the ed; and
+	 * enable that part of the schedule, if needed
+	 * and update count of queued periodic urbs
+	 */
+	urb->hcpriv = urb_priv;
+	td_submit_urb (ohci, urb);
+
+fail:
+	if (retval)
+		urb_free_priv (ohci, urb_priv);
+	spin_unlock_irqrestore (&ohci->lock, flags);
+	return retval;
+}
+
+/*
+ * decouple the URB from the HC queues (TDs, urb_priv).
+ * reporting is always done
+ * asynchronously, and we might be dealing with an urb that's
+ * partially transferred, or an ED with other urbs being unlinked.
+ */
+static int ohci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	unsigned long		flags;
+	int			rc;
+
+#ifdef OHCI_VERBOSE_DEBUG
+	urb_print(urb, "UNLINK", 1, status);
+#endif
+
+	spin_lock_irqsave (&ohci->lock, flags);
+	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (rc) {
+		;	/* Do nothing */
+	} else if (HC_IS_RUNNING(hcd->state)) {
+		urb_priv_t  *urb_priv;
+
+		/* Unless an IRQ completed the unlink while it was being
+		 * handed to us, flag it for unlink and giveback, and force
+		 * some upcoming INTR_SF to call finish_unlinks()
+		 */
+		urb_priv = urb->hcpriv;
+		if (urb_priv) {
+			if (urb_priv->ed->state == ED_OPER)
+				start_ed_unlink (ohci, urb_priv->ed);
+		}
+	} else {
+		/*
+		 * with HC dead, we won't respect hc queue pointers
+		 * any more ... just clean up every urb's memory.
+		 */
+		if (urb->hcpriv)
+			finish_urb(ohci, urb, status);
+	}
+	spin_unlock_irqrestore (&ohci->lock, flags);
+	return rc;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* frees config/altsetting state for endpoints,
+ * including ED memory, dummy TD, and bulk/intr data toggle
+ */
+
+static void
+ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	unsigned long		flags;
+	struct ed		*ed = ep->hcpriv;
+	unsigned		limit = 1000;
+
+	/* ASSERT:  any requests/urbs are being unlinked */
+	/* ASSERT:  nobody can be submitting urbs for this any more */
+
+	if (!ed)
+		return;
+
+rescan:
+	spin_lock_irqsave (&ohci->lock, flags);
+
+	if (!HC_IS_RUNNING (hcd->state)) {
+sanitize:
+		ed->state = ED_IDLE;
+		if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
+			ohci->eds_scheduled--;
+		finish_unlinks (ohci, 0);
+	}
+
+	switch (ed->state) {
+	case ED_UNLINK:		/* wait for hw to finish? */
+		/* major IRQ delivery trouble loses INTR_SF too... */
+		if (limit-- == 0) {
+			ohci_warn(ohci, "ED unlink timeout\n");
+			if (quirk_zfmicro(ohci)) {
+				ohci_warn(ohci, "Attempting ZF TD recovery\n");
+				ohci->ed_to_check = ed;
+				ohci->zf_delay = 2;
+			}
+			goto sanitize;
+		}
+		spin_unlock_irqrestore (&ohci->lock, flags);
+		schedule_timeout_uninterruptible(1);
+		goto rescan;
+	case ED_IDLE:		/* fully unlinked */
+		if (list_empty (&ed->td_list)) {
+			td_free (ohci, ed->dummy);
+			ed_free (ohci, ed);
+			break;
+		}
+		/* else FALL THROUGH */
+	default:
+		/* caller was supposed to have unlinked any requests;
+		 * that's not our job.  can't recover; must leak ed.
+		 */
+		ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n",
+			ed, ep->desc.bEndpointAddress, ed->state,
+			list_empty (&ed->td_list) ? "" : " (has tds)");
+		td_free (ohci, ed->dummy);
+		break;
+	}
+	ep->hcpriv = NULL;
+	spin_unlock_irqrestore (&ohci->lock, flags);
+	return;
+}
+
+static int ohci_get_frame (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+
+	return ohci_frame_no(ohci);
+}
+
+static void ohci_usb_reset (struct ohci_hcd *ohci)
+{
+	ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
+	ohci->hc_control &= OHCI_CTRL_RWC;
+	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+}
+
+/* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
+ * other cases where the next software may expect clean state from the
+ * "firmware".  this is bus-neutral, unlike shutdown() methods.
+ */
+static void
+ohci_shutdown (struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci;
+
+	ohci = hcd_to_ohci (hcd);
+	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+	ohci_usb_reset (ohci);
+	/* flush the writes */
+	(void) ohci_readl (ohci, &ohci->regs->control);
+}
+
+static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
+{
+	return (hc32_to_cpu(ohci, ed->hwINFO) & ED_IN) != 0
+		&& (hc32_to_cpu(ohci, ed->hwHeadP) & TD_MASK)
+			== (hc32_to_cpu(ohci, ed->hwTailP) & TD_MASK)
+		&& !list_empty(&ed->td_list);
+}
+
+/* ZF Micro watchdog timer callback. The ZF Micro chipset sometimes completes
+ * an interrupt TD but neglects to add it to the donelist.  On systems with
+ * this chipset, we need to periodically check the state of the queues to look
+ * for such "lost" TDs.
+ */
+static void unlink_watchdog_func(unsigned long _ohci)
+{
+	unsigned long	flags;
+	unsigned	max;
+	unsigned	seen_count = 0;
+	unsigned	i;
+	struct ed	**seen = NULL;
+	struct ohci_hcd	*ohci = (struct ohci_hcd *) _ohci;
+
+	spin_lock_irqsave(&ohci->lock, flags);
+	max = ohci->eds_scheduled;
+	if (!max)
+		goto done;
+
+	if (ohci->ed_to_check)
+		goto out;
+
+	seen = kcalloc(max, sizeof *seen, GFP_ATOMIC);
+	if (!seen)
+		goto out;
+
+	for (i = 0; i < NUM_INTS; i++) {
+		struct ed	*ed = ohci->periodic[i];
+
+		while (ed) {
+			unsigned	temp;
+
+			/* scan this branch of the periodic schedule tree */
+			for (temp = 0; temp < seen_count; temp++) {
+				if (seen[temp] == ed) {
+					/* we've checked it and what's after */
+					ed = NULL;
+					break;
+				}
+			}
+			if (!ed)
+				break;
+			seen[seen_count++] = ed;
+			if (!check_ed(ohci, ed)) {
+				ed = ed->ed_next;
+				continue;
+			}
+
+			/* HC's TD list is empty, but HCD sees at least one
+			 * TD that's not been sent through the donelist.
+			 */
+			ohci->ed_to_check = ed;
+			ohci->zf_delay = 2;
+
+			/* The HC may wait until the next frame to report the
+			 * TD as done through the donelist and INTR_WDH.  (We
+			 * just *assume* it's not a multi-TD interrupt URB;
+			 * those could defer the IRQ more than one frame, using
+			 * DI...)  Check again after the next INTR_SF.
+			 */
+			ohci_writel(ohci, OHCI_INTR_SF,
+					&ohci->regs->intrstatus);
+			ohci_writel(ohci, OHCI_INTR_SF,
+					&ohci->regs->intrenable);
+
+			/* flush those writes */
+			(void) ohci_readl(ohci, &ohci->regs->control);
+
+			goto out;
+		}
+	}
+out:
+	kfree(seen);
+	if (ohci->eds_scheduled)
+		mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
+done:
+	spin_unlock_irqrestore(&ohci->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+/* init memory, and kick BIOS/SMM off */
+
+static int ohci_init (struct ohci_hcd *ohci)
+{
+	int ret;
+	struct usb_hcd *hcd = ohci_to_hcd(ohci);
+
+	if (distrust_firmware)
+		ohci->flags |= OHCI_QUIRK_HUB_POWER;
+
+	disable (ohci);
+	ohci->regs = hcd->regs;
+
+	/* REVISIT this BIOS handshake is now moved into PCI "quirks", and
+	 * was never needed for most non-PCI systems ... remove the code?
+	 */
+
+#ifndef IR_DISABLE
+	/* SMM owns the HC?  not for long! */
+	if (!no_handshake && ohci_readl (ohci,
+					&ohci->regs->control) & OHCI_CTRL_IR) {
+		u32 temp;
+
+		ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n");
+
+		/* this timeout is arbitrary.  we make it long, so systems
+		 * depending on usb keyboards may be usable even if the
+		 * BIOS/SMM code seems pretty broken.
+		 */
+		temp = 500;	/* arbitrary: five seconds */
+
+		ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable);
+		ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus);
+		while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) {
+			msleep (10);
+			if (--temp == 0) {
+				ohci_err (ohci, "USB HC takeover failed!"
+					"  (BIOS/SMM bug)\n");
+				return -EBUSY;
+			}
+		}
+		ohci_usb_reset (ohci);
+	}
+#endif
+
+	/* Disable HC interrupts */
+	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+
+	/* flush the writes, and save key bits like RWC */
+	if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC)
+		ohci->hc_control |= OHCI_CTRL_RWC;
+
+	/* Read the number of ports unless overridden */
+	if (ohci->num_ports == 0)
+		ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
+
+	if (ohci->hcca)
+		return 0;
+
+	ohci->hcca = dma_alloc_coherent (hcd->self.controller,
+			sizeof *ohci->hcca, &ohci->hcca_dma, 0);
+	if (!ohci->hcca)
+		return -ENOMEM;
+
+	if ((ret = ohci_mem_init (ohci)) < 0)
+		ohci_stop (hcd);
+	else {
+		create_debug_files (ohci);
+	}
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * resets USB and controller
+ * enable interrupts
+ */
+static int ohci_run (struct ohci_hcd *ohci)
+{
+	u32			mask, val;
+	int			first = ohci->fminterval == 0;
+	struct usb_hcd		*hcd = ohci_to_hcd(ohci);
+
+	disable (ohci);
+
+	/* boot firmware should have set this up (5.1.1.3.1) */
+	if (first) {
+
+		val = ohci_readl (ohci, &ohci->regs->fminterval);
+		ohci->fminterval = val & 0x3fff;
+		if (ohci->fminterval != FI)
+			ohci_dbg (ohci, "fminterval delta %d\n",
+				ohci->fminterval - FI);
+		ohci->fminterval |= FSMP (ohci->fminterval) << 16;
+		/* also: power/overcurrent flags in roothub.a */
+	}
+
+	/* Reset USB nearly "by the book".  RemoteWakeupConnected has
+	 * to be checked in case boot firmware (BIOS/SMM/...) has set up
+	 * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
+	 * If the bus glue detected wakeup capability then it should
+	 * already be enabled; if so we'll just enable it again.
+	 */
+	if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
+		device_set_wakeup_capable(hcd->self.controller, 1);
+
+	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+	case OHCI_USB_OPER:
+		val = 0;
+		break;
+	case OHCI_USB_SUSPEND:
+	case OHCI_USB_RESUME:
+		ohci->hc_control &= OHCI_CTRL_RWC;
+		ohci->hc_control |= OHCI_USB_RESUME;
+		val = 10 /* msec wait */;
+		break;
+	// case OHCI_USB_RESET:
+	default:
+		ohci->hc_control &= OHCI_CTRL_RWC;
+		ohci->hc_control |= OHCI_USB_RESET;
+		val = 50 /* msec wait */;
+		break;
+	}
+	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+	// flush the writes
+	(void) ohci_readl (ohci, &ohci->regs->control);
+	msleep(val);
+
+	memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
+
+	/* 2msec timelimit here means no irqs/preempt */
+	spin_lock_irq (&ohci->lock);
+
+retry:
+	/* HC Reset requires max 10 us delay */
+	ohci_writel (ohci, OHCI_HCR,  &ohci->regs->cmdstatus);
+	val = 30;	/* ... allow extra time */
+	while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+		if (--val == 0) {
+			spin_unlock_irq (&ohci->lock);
+			ohci_err (ohci, "USB HC reset timed out!\n");
+			return -1;
+		}
+		udelay (1);
+	}
+
+	/* now we're in the SUSPEND state ... must go OPERATIONAL
+	 * within 2msec else HC enters RESUME
+	 *
+	 * ... but some hardware won't init fmInterval "by the book"
+	 * (SiS, OPTi ...), so reset again instead.  SiS doesn't need
+	 * this if we write fmInterval after we're OPERATIONAL.
+	 * Unclear about ALi, ServerWorks, and others ... this could
+	 * easily be a longstanding bug in chip init on Linux.
+	 */
+	if (ohci->flags & OHCI_QUIRK_INITRESET) {
+		ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+		// flush those writes
+		(void) ohci_readl (ohci, &ohci->regs->control);
+	}
+
+	/* Tell the controller where the control and bulk lists are
+	 * The lists are empty now. */
+	ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
+	ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
+
+	/* a reset clears this */
+	ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
+
+	periodic_reinit (ohci);
+
+	/* some OHCI implementations are finicky about how they init.
+	 * bogus values here mean not even enumeration could work.
+	 */
+	if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0
+			|| !ohci_readl (ohci, &ohci->regs->periodicstart)) {
+		if (!(ohci->flags & OHCI_QUIRK_INITRESET)) {
+			ohci->flags |= OHCI_QUIRK_INITRESET;
+			ohci_dbg (ohci, "enabling initreset quirk\n");
+			goto retry;
+		}
+		spin_unlock_irq (&ohci->lock);
+		ohci_err (ohci, "init err (%08x %04x)\n",
+			ohci_readl (ohci, &ohci->regs->fminterval),
+			ohci_readl (ohci, &ohci->regs->periodicstart));
+		return -EOVERFLOW;
+	}
+
+	/* use rhsc irqs after khubd is fully initialized */
+	hcd->poll_rh = 1;
+	hcd->uses_new_polling = 1;
+
+	/* start controller operations */
+	ohci->hc_control &= OHCI_CTRL_RWC;
+	ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
+	ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
+	hcd->state = HC_STATE_RUNNING;
+
+	/* wake on ConnectStatusChange, matching external hubs */
+	ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
+
+	/* Choose the interrupts we care about now, others later on demand */
+	mask = OHCI_INTR_INIT;
+	ohci_writel (ohci, ~0, &ohci->regs->intrstatus);
+	ohci_writel (ohci, mask, &ohci->regs->intrenable);
+
+	/* handle root hub init quirks ... */
+	val = roothub_a (ohci);
+	val &= ~(RH_A_PSM | RH_A_OCPM);
+	if (ohci->flags & OHCI_QUIRK_SUPERIO) {
+		/* NSC 87560 and maybe others */
+		val |= RH_A_NOCP;
+		val &= ~(RH_A_POTPGT | RH_A_NPS);
+		ohci_writel (ohci, val, &ohci->regs->roothub.a);
+	} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
+			(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
+		/* hub power always on; required for AMD-756 and some
+		 * Mac platforms.  ganged overcurrent reporting, if any.
+		 */
+		val |= RH_A_NPS;
+		ohci_writel (ohci, val, &ohci->regs->roothub.a);
+	}
+	ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
+	ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
+						&ohci->regs->roothub.b);
+	// flush those writes
+	(void) ohci_readl (ohci, &ohci->regs->control);
+
+	ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+	spin_unlock_irq (&ohci->lock);
+
+	// POTPGT delay is bits 24-31, in 2 ms units.
+	mdelay ((val >> 23) & 0x1fe);
+	hcd->state = HC_STATE_RUNNING;
+
+	if (quirk_zfmicro(ohci)) {
+		/* Create timer to watch for bad queue state on ZF Micro */
+		setup_timer(&ohci->unlink_watchdog, unlink_watchdog_func,
+				(unsigned long) ohci);
+
+		ohci->eds_scheduled = 0;
+		ohci->ed_to_check = NULL;
+	}
+
+	ohci_dump (ohci, 1);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static irqreturn_t ohci_irq (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+	struct ohci_regs __iomem *regs = ohci->regs;
+	int			ints;
+
+	/* Read interrupt status (and flush pending writes).  We ignore the
+	 * optimization of checking the LSB of hcca->done_head; it doesn't
+	 * work on all systems (edge triggering for OHCI can be a factor).
+	 */
+	ints = ohci_readl(ohci, &regs->intrstatus);
+
+	/* Check for an all 1's result which is a typical consequence
+	 * of dead, unclocked, or unplugged (CardBus...) devices
+	 */
+	if (ints == ~(u32)0) {
+		disable (ohci);
+		ohci_dbg (ohci, "device removed!\n");
+		return IRQ_HANDLED;
+	}
+
+	/* We only care about interrupts that are enabled */
+	ints &= ohci_readl(ohci, &regs->intrenable);
+
+	/* interrupt for some other device? */
+	if (ints == 0)
+		return IRQ_NOTMINE;
+
+	if (ints & OHCI_INTR_UE) {
+		// e.g. due to PCI Master/Target Abort
+		if (quirk_nec(ohci)) {
+			/* Workaround for a silicon bug in some NEC chips used
+			 * in Apple's PowerBooks. Adapted from Darwin code.
+			 */
+			ohci_err (ohci, "OHCI Unrecoverable Error, scheduling NEC chip restart\n");
+
+			ohci_writel (ohci, OHCI_INTR_UE, &regs->intrdisable);
+
+			schedule_work (&ohci->nec_work);
+		} else {
+			disable (ohci);
+			ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
+		}
+
+		ohci_dump (ohci, 1);
+		ohci_usb_reset (ohci);
+	}
+
+	if (ints & OHCI_INTR_RHSC) {
+		ohci_vdbg(ohci, "rhsc\n");
+		ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+		ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC,
+				&regs->intrstatus);
+
+		/* NOTE: Vendors didn't always make the same implementation
+		 * choices for RHSC.  Many followed the spec; RHSC triggers
+		 * on an edge, like setting and maybe clearing a port status
+		 * change bit.  With others it's level-triggered, active
+		 * until khubd clears all the port status change bits.  We'll
+		 * always disable it here and rely on polling until khubd
+		 * re-enables it.
+		 */
+		ohci_writel(ohci, OHCI_INTR_RHSC, &regs->intrdisable);
+		usb_hcd_poll_rh_status(hcd);
+	}
+
+	/* For connect and disconnect events, we expect the controller
+	 * to turn on RHSC along with RD.  But for remote wakeup events
+	 * this might not happen.
+	 */
+	else if (ints & OHCI_INTR_RD) {
+		ohci_vdbg(ohci, "resume detect\n");
+		ohci_writel(ohci, OHCI_INTR_RD, &regs->intrstatus);
+		hcd->poll_rh = 1;
+		if (ohci->autostop) {
+			spin_lock (&ohci->lock);
+			ohci_rh_resume (ohci);
+			spin_unlock (&ohci->lock);
+		} else
+			usb_hcd_resume_root_hub(hcd);
+	}
+
+	if (ints & OHCI_INTR_WDH) {
+		spin_lock (&ohci->lock);
+		dl_done_list (ohci);
+		spin_unlock (&ohci->lock);
+	}
+
+	if (quirk_zfmicro(ohci) && (ints & OHCI_INTR_SF)) {
+		spin_lock(&ohci->lock);
+		if (ohci->ed_to_check) {
+			struct ed *ed = ohci->ed_to_check;
+
+			if (check_ed(ohci, ed)) {
+				/* HC thinks the TD list is empty; HCD knows
+				 * at least one TD is outstanding
+				 */
+				if (--ohci->zf_delay == 0) {
+					struct td *td = list_entry(
+						ed->td_list.next,
+						struct td, td_list);
+					ohci_warn(ohci,
+						  "Reclaiming orphan TD %p\n",
+						  td);
+					takeback_td(ohci, td);
+					ohci->ed_to_check = NULL;
+				}
+			} else
+				ohci->ed_to_check = NULL;
+		}
+		spin_unlock(&ohci->lock);
+	}
+
+	/* could track INTR_SO to reduce available PCI/... bandwidth */
+
+	/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
+	 * when there's still unlinking to be done (next frame).
+	 */
+	spin_lock (&ohci->lock);
+	if (ohci->ed_rm_list)
+		finish_unlinks (ohci, ohci_frame_no(ohci));
+	if ((ints & OHCI_INTR_SF) != 0
+			&& !ohci->ed_rm_list
+			&& !ohci->ed_to_check
+			&& HC_IS_RUNNING(hcd->state))
+		ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
+	spin_unlock (&ohci->lock);
+
+	if (HC_IS_RUNNING(hcd->state)) {
+		ohci_writel (ohci, ints, &regs->intrstatus);
+		ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);
+		// flush those writes
+		(void) ohci_readl (ohci, &ohci->regs->control);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void ohci_stop (struct usb_hcd *hcd)
+{
+	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
+
+	ohci_dump (ohci, 1);
+
+	flush_scheduled_work();
+
+	ohci_usb_reset (ohci);
+	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+	free_irq(hcd->irq, hcd);
+	hcd->irq = -1;
+
+	if (quirk_zfmicro(ohci))
+		del_timer(&ohci->unlink_watchdog);
+	if (quirk_amdiso(ohci))
+		amd_iso_dev_put();
+
+	remove_debug_files (ohci);
+	ohci_mem_cleanup (ohci);
+	if (ohci->hcca) {
+		dma_free_coherent (hcd->self.controller,
+				sizeof *ohci->hcca,
+				ohci->hcca, ohci->hcca_dma);
+		ohci->hcca = NULL;
+		ohci->hcca_dma = 0;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_PM) || defined(CONFIG_PCI)
+
+/* must not be called from interrupt context */
+static int ohci_restart (struct ohci_hcd *ohci)
+{
+	int temp;
+	int i;
+	struct urb_priv *priv;
+
+	spin_lock_irq(&ohci->lock);
+	disable (ohci);
+
+	/* Recycle any "live" eds/tds (and urbs). */
+	if (!list_empty (&ohci->pending))
+		ohci_dbg(ohci, "abort schedule...\n");
+	list_for_each_entry (priv, &ohci->pending, pending) {
+		struct urb	*urb = priv->td[0]->urb;
+		struct ed	*ed = priv->ed;
+
+		switch (ed->state) {
+		case ED_OPER:
+			ed->state = ED_UNLINK;
+			ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE);
+			ed_deschedule (ohci, ed);
+
+			ed->ed_next = ohci->ed_rm_list;
+			ed->ed_prev = NULL;
+			ohci->ed_rm_list = ed;
+			/* FALLTHROUGH */
+		case ED_UNLINK:
+			break;
+		default:
+			ohci_dbg(ohci, "bogus ed %p state %d\n",
+					ed, ed->state);
+		}
+
+		if (!urb->unlinked)
+			urb->unlinked = -ESHUTDOWN;
+	}
+	finish_unlinks (ohci, 0);
+	spin_unlock_irq(&ohci->lock);
+
+	/* paranoia, in case that didn't work: */
+
+	/* empty the interrupt branches */
+	for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
+	for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
+
+	/* no EDs to remove */
+	ohci->ed_rm_list = NULL;
+
+	/* empty control and bulk lists */
+	ohci->ed_controltail = NULL;
+	ohci->ed_bulktail    = NULL;
+
+	if ((temp = ohci_run (ohci)) < 0) {
+		ohci_err (ohci, "can't restart, %d\n", temp);
+		return temp;
+	}
+	ohci_dbg(ohci, "restart complete\n");
+	return 0;
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+MODULE_AUTHOR (DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE ("GPL");
+
+#ifdef CONFIG_PCI
+#include "ohci-pci.c"
+#define PCI_DRIVER		ohci_pci_driver
+#endif
+
+#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111)
+#include "ohci-sa1111.c"
+#define SA1111_DRIVER		ohci_hcd_sa1111_driver
+#endif
+
+#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
+#include "ohci-s3c2410.c"
+#define PLATFORM_DRIVER		ohci_hcd_s3c2410_driver
+#endif
+
+#ifdef CONFIG_USB_OHCI_HCD_OMAP1
+#include "ohci-omap.c"
+#define OMAP1_PLATFORM_DRIVER	ohci_hcd_omap_driver
+#endif
+
+#ifdef CONFIG_USB_OHCI_HCD_OMAP3
+#include "ohci-omap3.c"
+#define OMAP3_PLATFORM_DRIVER	ohci_hcd_omap3_driver
+#endif
+
+#ifdef CONFIG_ARCH_LH7A404
+#include "ohci-lh7a404.c"
+#define PLATFORM_DRIVER		ohci_hcd_lh7a404_driver
+#endif
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#include "ohci-pxa27x.c"
+#define PLATFORM_DRIVER		ohci_hcd_pxa27x_driver
+#endif
+
+#ifdef CONFIG_ARCH_EP93XX
+#include "ohci-ep93xx.c"
+#define PLATFORM_DRIVER		ohci_hcd_ep93xx_driver
+#endif
+
+#ifdef CONFIG_SOC_AU1X00
+#include "ohci-au1xxx.c"
+#define PLATFORM_DRIVER		ohci_hcd_au1xxx_driver
+#endif
+
+#ifdef CONFIG_PNX8550
+#include "ohci-pnx8550.c"
+#define PLATFORM_DRIVER		ohci_hcd_pnx8550_driver
+#endif
+
+#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
+#include "ohci-ppc-soc.c"
+#define PLATFORM_DRIVER		ohci_hcd_ppc_soc_driver
+#endif
+
+#ifdef CONFIG_ARCH_AT91
+#include "ohci-at91.c"
+#define PLATFORM_DRIVER		ohci_hcd_at91_driver
+#endif
+
+#ifdef CONFIG_ARCH_PNX4008
+#include "ohci-pnx4008.c"
+#define PLATFORM_DRIVER		usb_hcd_pnx4008_driver
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DA8XX
+#include "ohci-da8xx.c"
+#define PLATFORM_DRIVER		ohci_hcd_da8xx_driver
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7786)
+#include "ohci-sh.c"
+#define PLATFORM_DRIVER		ohci_hcd_sh_driver
+#endif
+
+
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF
+#include "ohci-ppc-of.c"
+#define OF_PLATFORM_DRIVER	ohci_hcd_ppc_of_driver
+#endif
+
+#ifdef CONFIG_PPC_PS3
+#include "ohci-ps3.c"
+#define PS3_SYSTEM_BUS_DRIVER	ps3_ohci_driver
+#endif
+
+#ifdef CONFIG_USB_OHCI_HCD_SSB
+#include "ohci-ssb.c"
+#define SSB_OHCI_DRIVER		ssb_ohci_driver
+#endif
+
+#ifdef CONFIG_MFD_SM501
+#include "ohci-sm501.c"
+#define SM501_OHCI_DRIVER	ohci_hcd_sm501_driver
+#endif
+
+#ifdef CONFIG_MFD_TC6393XB
+#include "ohci-tmio.c"
+#define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
+#endif
+
+#if	!defined(PCI_DRIVER) &&		\
+	!defined(PLATFORM_DRIVER) &&	\
+	!defined(OMAP1_PLATFORM_DRIVER) &&	\
+	!defined(OMAP3_PLATFORM_DRIVER) &&	\
+	!defined(OF_PLATFORM_DRIVER) &&	\
+	!defined(SA1111_DRIVER) &&	\
+	!defined(PS3_SYSTEM_BUS_DRIVER) && \
+	!defined(SM501_OHCI_DRIVER) && \
+	!defined(TMIO_OHCI_DRIVER) && \
+	!defined(SSB_OHCI_DRIVER)
+#error "missing bus glue for ohci-hcd"
+#endif
+
+static int __init ohci_hcd_mod_init(void)
+{
+	int retval = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
+	pr_debug ("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
+		sizeof (struct ed), sizeof (struct td));
+	set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
+
+#ifdef DEBUG
+	ohci_debug_root = debugfs_create_dir("ohci", usb_debug_root);
+	if (!ohci_debug_root) {
+		retval = -ENOENT;
+		goto error_debug;
+	}
+#endif
+
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	retval = ps3_ohci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
+	if (retval < 0)
+		goto error_ps3;
+#endif
+
+#ifdef PLATFORM_DRIVER
+	retval = platform_driver_register(&PLATFORM_DRIVER);
+	if (retval < 0)
+		goto error_platform;
+#endif
+
+#ifdef OMAP1_PLATFORM_DRIVER
+	retval = platform_driver_register(&OMAP1_PLATFORM_DRIVER);
+	if (retval < 0)
+		goto error_omap1_platform;
+#endif
+
+#ifdef OMAP3_PLATFORM_DRIVER
+	retval = platform_driver_register(&OMAP3_PLATFORM_DRIVER);
+	if (retval < 0)
+		goto error_omap3_platform;
+#endif
+
+#ifdef OF_PLATFORM_DRIVER
+	retval = of_register_platform_driver(&OF_PLATFORM_DRIVER);
+	if (retval < 0)
+		goto error_of_platform;
+#endif
+
+#ifdef SA1111_DRIVER
+	retval = sa1111_driver_register(&SA1111_DRIVER);
+	if (retval < 0)
+		goto error_sa1111;
+#endif
+
+#ifdef PCI_DRIVER
+	retval = pci_register_driver(&PCI_DRIVER);
+	if (retval < 0)
+		goto error_pci;
+#endif
+
+#ifdef SSB_OHCI_DRIVER
+	retval = ssb_driver_register(&SSB_OHCI_DRIVER);
+	if (retval)
+		goto error_ssb;
+#endif
+
+#ifdef SM501_OHCI_DRIVER
+	retval = platform_driver_register(&SM501_OHCI_DRIVER);
+	if (retval < 0)
+		goto error_sm501;
+#endif
+
+#ifdef TMIO_OHCI_DRIVER
+	retval = platform_driver_register(&TMIO_OHCI_DRIVER);
+	if (retval < 0)
+		goto error_tmio;
+#endif
+
+	return retval;
+
+	/* Error path */
+#ifdef TMIO_OHCI_DRIVER
+	platform_driver_unregister(&TMIO_OHCI_DRIVER);
+ error_tmio:
+#endif
+#ifdef SM501_OHCI_DRIVER
+	platform_driver_unregister(&SM501_OHCI_DRIVER);
+ error_sm501:
+#endif
+#ifdef SSB_OHCI_DRIVER
+	ssb_driver_unregister(&SSB_OHCI_DRIVER);
+ error_ssb:
+#endif
+#ifdef PCI_DRIVER
+	pci_unregister_driver(&PCI_DRIVER);
+ error_pci:
+#endif
+#ifdef SA1111_DRIVER
+	sa1111_driver_unregister(&SA1111_DRIVER);
+ error_sa1111:
+#endif
+#ifdef OF_PLATFORM_DRIVER
+	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
+ error_of_platform:
+#endif
+#ifdef PLATFORM_DRIVER
+	platform_driver_unregister(&PLATFORM_DRIVER);
+ error_platform:
+#endif
+#ifdef OMAP1_PLATFORM_DRIVER
+	platform_driver_unregister(&OMAP1_PLATFORM_DRIVER);
+ error_omap1_platform:
+#endif
+#ifdef OMAP3_PLATFORM_DRIVER
+	platform_driver_unregister(&OMAP3_PLATFORM_DRIVER);
+ error_omap3_platform:
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+ error_ps3:
+#endif
+#ifdef DEBUG
+	debugfs_remove(ohci_debug_root);
+	ohci_debug_root = NULL;
+ error_debug:
+#endif
+
+	clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
+	return retval;
+}
+module_init(ohci_hcd_mod_init);
+
+static void __exit ohci_hcd_mod_exit(void)
+{
+#ifdef TMIO_OHCI_DRIVER
+	platform_driver_unregister(&TMIO_OHCI_DRIVER);
+#endif
+#ifdef SM501_OHCI_DRIVER
+	platform_driver_unregister(&SM501_OHCI_DRIVER);
+#endif
+#ifdef SSB_OHCI_DRIVER
+	ssb_driver_unregister(&SSB_OHCI_DRIVER);
+#endif
+#ifdef PCI_DRIVER
+	pci_unregister_driver(&PCI_DRIVER);
+#endif
+#ifdef SA1111_DRIVER
+	sa1111_driver_unregister(&SA1111_DRIVER);
+#endif
+#ifdef OF_PLATFORM_DRIVER
+	of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
+#endif
+#ifdef PLATFORM_DRIVER
+	platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+	ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+#endif
+#ifdef DEBUG
+	debugfs_remove(ohci_debug_root);
+#endif
+	clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
+}
+module_exit(ohci_hcd_mod_exit);
+
diff -Nur linux-2.6.35.7.orig/drivers/watchdog/ar71xx_wdt.c linux-2.6.35.7/drivers/watchdog/ar71xx_wdt.c
--- linux-2.6.35.7.orig/drivers/watchdog/ar71xx_wdt.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/watchdog/ar71xx_wdt.c	2010-10-14 20:28:01.508101380 +0200
@@ -0,0 +1,270 @@
+/*
+ * Driver for the Atheros AR71xx SoC's built-in hardware watchdog timer.
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This driver was based on: drivers/watchdog/ixp4xx_wdt.c
+ *	Author: Deepak Saxena <dsaxena@plexity.net>
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * which again was based on sa1100 driver,
+ *	Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#define DRV_NAME	"ar71xx-wdt"
+#define DRV_DESC	"Atheros AR71xx hardware watchdog driver"
+#define DRV_VERSION	"0.1.0"
+
+#define WDT_TIMEOUT	15	/* seconds */
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+			   "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+#endif
+
+static unsigned long wdt_flags;
+
+#define WDT_FLAGS_BUSY		0
+#define WDT_FLAGS_EXPECT_CLOSE	1
+
+static int wdt_timeout = WDT_TIMEOUT;
+static int boot_status;
+static int max_timeout;
+
+static void inline ar71xx_wdt_keepalive(void)
+{
+	ar71xx_reset_wr(AR71XX_RESET_REG_WDOG, ar71xx_ahb_freq * wdt_timeout);
+}
+
+static void inline ar71xx_wdt_enable(void)
+{
+	printk(KERN_DEBUG DRV_NAME ": enabling watchdog timer\n");
+	ar71xx_wdt_keepalive();
+	ar71xx_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_FCR);
+}
+
+static void inline ar71xx_wdt_disable(void)
+{
+	printk(KERN_DEBUG DRV_NAME ": disabling watchdog timer\n");
+	ar71xx_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_NONE);
+}
+
+static int ar71xx_wdt_set_timeout(int val)
+{
+	if (val < 1 || val > max_timeout)
+		return -EINVAL;
+
+	wdt_timeout = val;
+	ar71xx_wdt_keepalive();
+
+	printk(KERN_DEBUG DRV_NAME ": timeout=%d secs\n", wdt_timeout);
+
+	return 0;
+}
+
+static int ar71xx_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_FLAGS_BUSY, &wdt_flags))
+		return -EBUSY;
+
+	clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags);
+
+	ar71xx_wdt_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int ar71xx_wdt_release(struct inode *inode, struct file *file)
+{
+	if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags)) {
+		ar71xx_wdt_disable();
+	} else {
+		printk(KERN_CRIT DRV_NAME ": device closed unexpectedly, "
+					"watchdog timer will not stop!\n");
+	}
+
+	clear_bit(WDT_FLAGS_BUSY, &wdt_flags);
+	clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags);
+
+	return 0;
+}
+
+static ssize_t ar71xx_wdt_write(struct file *file, const char *data,
+				size_t len, loff_t *ppos)
+{
+        if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags);
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+
+				if (c == 'V')
+					set_bit(WDT_FLAGS_EXPECT_CLOSE,
+						&wdt_flags);
+			}
+		}
+
+		ar71xx_wdt_keepalive();
+	}
+
+	return len;
+}
+
+static struct watchdog_info ar71xx_wdt_info = {
+	.options		= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+				  WDIOF_MAGICCLOSE | WDIOF_CARDRESET,
+	.firmware_version 	= 0,
+	.identity		= "AR71XX watchdog",
+};
+
+static int ar71xx_wdt_ioctl(struct inode *inode, struct file *file,
+			    unsigned int cmd, unsigned long arg)
+{
+	int t;
+	int ret;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info *)arg,
+				   &ar71xx_wdt_info,
+				   sizeof(&ar71xx_wdt_info)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, (int *)arg) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(boot_status, (int *)arg) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_KEEPALIVE:
+		ar71xx_wdt_keepalive();
+		ret = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(t, (int *)arg) ? -EFAULT : 0;
+		if (ret)
+			break;
+
+		ret = ar71xx_wdt_set_timeout(t);
+		if (ret)
+			break;
+
+		/* fallthrough */
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(wdt_timeout, (int *)arg) ? -EFAULT : 0;
+		break;
+
+	default:
+		ret = -ENOTTY;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct file_operations ar71xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.write		= ar71xx_wdt_write,
+	.ioctl		= ar71xx_wdt_ioctl,
+	.open		= ar71xx_wdt_open,
+	.release	= ar71xx_wdt_release,
+};
+
+static struct miscdevice ar71xx_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &ar71xx_wdt_fops,
+};
+
+static int __devinit ar71xx_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	max_timeout = (0xfffffffful / ar71xx_ahb_freq);
+	wdt_timeout = (max_timeout < WDT_TIMEOUT) ? max_timeout : WDT_TIMEOUT;
+
+	boot_status =
+		(ar71xx_reset_rr(AR71XX_RESET_REG_WDOG_CTRL) & WDOG_CTRL_LAST_RESET) ?
+		WDIOF_CARDRESET : 0;
+
+	ret = misc_register(&ar71xx_wdt_miscdev);
+	if (ret)
+		goto err_out;
+
+	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
+
+	printk(KERN_DEBUG DRV_NAME ": timeout=%d secs (max=%d)\n",
+				 	wdt_timeout, max_timeout);
+
+	return 0;
+
+err_out:
+	return ret;
+}
+
+static int __devexit ar71xx_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&ar71xx_wdt_miscdev);
+	return 0;
+}
+
+static struct platform_driver ar71xx_wdt_driver = {
+	.probe		= ar71xx_wdt_probe,
+	.remove		= __devexit_p(ar71xx_wdt_remove),
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ar71xx_wdt_init(void)
+{
+	return platform_driver_register(&ar71xx_wdt_driver);
+}
+module_init(ar71xx_wdt_init);
+
+static void __exit ar71xx_wdt_exit(void)
+{
+	platform_driver_unregister(&ar71xx_wdt_driver);
+}
+module_exit(ar71xx_wdt_exit);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
+MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff -Nur linux-2.6.35.7.orig/drivers/watchdog/Kconfig linux-2.6.35.7/drivers/watchdog/Kconfig
--- linux-2.6.35.7.orig/drivers/watchdog/Kconfig	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/watchdog/Kconfig	2010-10-14 20:28:01.548101099 +0200
@@ -875,6 +875,13 @@
 	help
 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
 
+config AR71XX_WDT
+	tristate "Atheros AR71xx Watchdog Timer"
+	depends on ATHEROS_AR71XX
+	help
+	  Hardware driver for the built-in watchdog timer on the Atheros
+	  AR71xx SoCs.
+
 # PARISC Architecture
 
 # POWERPC Architecture
diff -Nur linux-2.6.35.7.orig/drivers/watchdog/Kconfig.orig linux-2.6.35.7/drivers/watchdog/Kconfig.orig
--- linux-2.6.35.7.orig/drivers/watchdog/Kconfig.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/watchdog/Kconfig.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,1114 @@
+#
+# Watchdog device configuration
+#
+
+menuconfig WATCHDOG
+	bool "Watchdog Timer Support"
+	---help---
+	  If you say Y here (and to one of the following options) and create a
+	  character special file /dev/watchdog with major number 10 and minor
+	  number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
+	  subsequently opening the file and then failing to write to it for
+	  longer than 1 minute will result in rebooting the machine. This
+	  could be useful for a networked machine that needs to come back
+	  on-line as fast as possible after a lock-up. There's both a watchdog
+	  implementation entirely in software (which can sometimes fail to
+	  reboot the machine) and a driver for hardware watchdog boards, which
+	  are more robust and can also keep track of the temperature inside
+	  your computer. For details, read
+	  <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
+
+	  The watchdog is usually used together with the watchdog daemon
+	  which is available from
+	  <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
+	  also monitor NFS connections and can reboot the machine when the process
+	  table is full.
+
+	  If unsure, say N.
+
+if WATCHDOG
+
+config WATCHDOG_NOWAYOUT
+	bool "Disable watchdog shutdown on close"
+	help
+	  The default watchdog behaviour (which you get if you say N here) is
+	  to stop the timer if the process managing it closes the file
+	  /dev/watchdog. It's always remotely possible that this process might
+	  get killed. If you say Y here, the watchdog cannot be stopped once
+	  it has been started.
+
+#
+# General Watchdog drivers
+#
+
+comment "Watchdog Device Drivers"
+
+# Architecture Independent
+
+config SOFT_WATCHDOG
+	tristate "Software watchdog"
+	help
+	  A software monitoring watchdog. This will fail to reboot your system
+	  from some situations that the hardware watchdog will recover
+	  from. Equally it's a lot cheaper to install.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called softdog.
+
+config WM831X_WATCHDOG
+	tristate "WM831x watchdog"
+	depends on MFD_WM831X
+	help
+	  Support for the watchdog in the WM831x AudioPlus PMICs.  When
+	  the watchdog triggers the system will be reset.
+
+config WM8350_WATCHDOG
+	tristate "WM8350 watchdog"
+	depends on MFD_WM8350
+	help
+	  Support for the watchdog in the WM8350 AudioPlus PMIC.  When
+	  the watchdog triggers the system will be reset.
+
+# ALPHA Architecture
+
+# ARM Architecture
+
+config AT91RM9200_WATCHDOG
+	tristate "AT91RM9200 watchdog"
+	depends on ARCH_AT91RM9200
+	help
+	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
+	  system when the timeout is reached.
+
+config AT91SAM9X_WATCHDOG
+	tristate "AT91SAM9X / AT91CAP9 watchdog"
+	depends on ARCH_AT91 && !ARCH_AT91RM9200
+	help
+	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
+	  reboot your system when the timeout is reached.
+
+config 21285_WATCHDOG
+	tristate "DC21285 watchdog"
+	depends on FOOTBRIDGE
+	help
+	  The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
+	  here if you wish to use this. Alternatively say M to compile the
+	  driver as a module, which will be called wdt285.
+
+	  This driver does not work on all machines. In particular, early CATS
+	  boards have hardware problems that will cause the machine to simply
+	  lock up if the watchdog fires.
+
+	  "If in doubt, leave it out" - say N.
+
+config 977_WATCHDOG
+	tristate "NetWinder WB83C977 watchdog"
+	depends on FOOTBRIDGE && ARCH_NETWINDER
+	help
+	  Say Y here to include support for the WB977 watchdog included in
+	  NetWinder machines. Alternatively say M to compile the driver as
+	  a module, which will be called wdt977.
+
+	  Not sure? It's safe to say N.
+
+config IXP2000_WATCHDOG
+	tristate "IXP2000 Watchdog"
+	depends on ARCH_IXP2000
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the Intel IXP2000(2400, 2800, 2850) network processors.
+	  This driver can be built as a module by choosing M. The module
+	  will be called ixp2000_wdt.
+
+	  Say N if you are unsure.
+
+config IXP4XX_WATCHDOG
+	tristate "IXP4xx Watchdog"
+	depends on ARCH_IXP4XX
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the Intel IXP4xx network processors. This driver can
+	  be built as a module by choosing M. The module will
+	  be called ixp4xx_wdt.
+
+	  Note: The internal IXP4xx watchdog does a soft CPU reset
+	  which doesn't reset any peripherals. There are circumstances
+	  where the watchdog will fail to reset the board correctly
+	  (e.g., if the boot ROM is in an unreadable state).
+
+	  Say N if you are unsure.
+
+config KS8695_WATCHDOG
+	tristate "KS8695 watchdog"
+	depends on ARCH_KS8695
+	help
+	  Watchdog timer embedded into KS8695 processor. This will reboot your
+	  system when the timeout is reached.
+
+config HAVE_S3C2410_WATCHDOG
+	bool
+	help
+	  This will include watchdog timer support for Samsung SoCs. If
+	  you want to include watchdog support for any machine, kindly
+	  select this in the respective mach-XXXX/Kconfig file.
+
+config S3C2410_WATCHDOG
+	tristate "S3C2410 Watchdog"
+	depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG
+	help
+	  Watchdog timer block in the Samsung SoCs. This will reboot
+	  the system when the timer expires with the watchdog enabled.
+
+	  The driver is limited by the speed of the system's PCLK
+	  signal, so with reasonably fast systems (PCLK around 50-66MHz)
+	  then watchdog intervals of over approximately 20seconds are
+	  unavailable.
+
+	  The driver can be built as a module by choosing M, and will
+	  be called s3c2410_wdt
+
+config SA1100_WATCHDOG
+	tristate "SA1100/PXA2xx watchdog"
+	depends on ARCH_SA1100 || ARCH_PXA
+	help
+	  Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
+	  reboot your system when timeout is reached.
+
+	  NOTE: once enabled, this timer cannot be disabled.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sa1100_wdt.
+
+config MPCORE_WATCHDOG
+	tristate "MPcore watchdog"
+	depends on HAVE_ARM_TWD
+	help
+	  Watchdog timer embedded into the MPcore system.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mpcore_wdt.
+
+config EP93XX_WATCHDOG
+	tristate "EP93xx Watchdog"
+	depends on ARCH_EP93XX
+	help
+	  Say Y here if to include support for the watchdog timer
+	  embedded in the Cirrus Logic EP93xx family of devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ep93xx_wdt.
+
+config OMAP_WATCHDOG
+	tristate "OMAP Watchdog"
+	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+	help
+	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
+	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
+
+config PNX4008_WATCHDOG
+	tristate "PNX4008 Watchdog"
+	depends on ARCH_PNX4008
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the PNX4008 processor.
+	  This driver can be built as a module by choosing M. The module
+	  will be called pnx4008_wdt.
+
+	  Say N if you are unsure.
+
+config IOP_WATCHDOG
+	tristate "IOP Watchdog"
+	depends on PLAT_IOP
+	select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
+	  be built as a module by choosing M. The module will
+	  be called iop_wdt.
+
+	  Note: The IOP13XX watchdog does an Internal Bus Reset which will
+	  affect both cores and the peripherals of the IOP.  The ATU-X
+	  and/or ATUe configuration registers will remain intact, but if
+	  operating as an Root Complex and/or Central Resource, the PCI-X
+	  and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.
+
+config DAVINCI_WATCHDOG
+	tristate "DaVinci watchdog"
+	depends on ARCH_DAVINCI
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the DaVinci DM644x/DM646x processors.
+	  To compile this driver as a module, choose M here: the
+	  module will be called davinci_wdt.
+
+	  NOTE: once enabled, this timer cannot be disabled.
+	  Say N if you are unsure.
+
+config ORION_WATCHDOG
+	tristate "Orion watchdog"
+	depends on ARCH_ORION5X || ARCH_KIRKWOOD
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the Marvell Orion5x and Kirkwood ARM SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called orion_wdt.
+
+config COH901327_WATCHDOG
+	bool "ST-Ericsson COH 901 327 watchdog"
+	depends on ARCH_U300
+	default y if MACH_U300
+	help
+	  Say Y here to include Watchdog timer support for the
+	  watchdog embedded into the ST-Ericsson U300 series platforms.
+	  This watchdog is used to reset the system and thus cannot be
+	  compiled as a module.
+
+config TWL4030_WATCHDOG
+	tristate "TWL4030 Watchdog"
+	depends on TWL4030_CORE
+	help
+	  Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
+	  watchdog timer support for TWL4030 chips.
+
+config STMP3XXX_WATCHDOG
+	tristate "Freescale STMP3XXX watchdog"
+	depends on ARCH_STMP3XXX
+	help
+	  Say Y here if to include support for the watchdog timer
+	  for the Sigmatel STMP37XX/378X SoC.
+	  To compile this driver as a module, choose M here: the
+	  module will be called stmp3xxx_wdt.
+
+config NUC900_WATCHDOG
+	tristate "Nuvoton NUC900 watchdog"
+	depends on ARCH_W90X900
+	help
+	  Say Y here if to include support for the watchdog timer
+	  for the Nuvoton NUC900 series SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called nuc900_wdt.
+
+config ADX_WATCHDOG
+	tristate "Avionic Design Xanthos watchdog"
+	depends on ARCH_PXA_ADX
+	help
+	  Say Y here if you want support for the watchdog timer on Avionic
+	  Design Xanthos boards.
+
+config TS72XX_WATCHDOG
+	tristate "TS-72XX SBC Watchdog"
+	depends on MACH_TS72XX
+	help
+	  Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
+	  watchdog timer implemented in a external CPLD chip. Say Y here
+	  if you want to support for the watchdog timer on TS-72XX boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ts72xx_wdt.
+
+config MAX63XX_WATCHDOG
+	tristate "Max63xx watchdog"
+	depends on ARM && HAS_IOMEM
+	help
+	  Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
+
+config IMX2_WDT
+	tristate "IMX2+ Watchdog"
+	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX5
+	help
+	  This is the driver for the hardware watchdog
+	  on the Freescale IMX2 and later processors.
+	  If you have one of these processors and wish to have
+	  watchdog support enabled, say Y, otherwise say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx2_wdt.
+
+# AVR32 Architecture
+
+config AT32AP700X_WDT
+	tristate "AT32AP700x watchdog"
+	depends on CPU_AT32AP700X
+	help
+	  Watchdog timer embedded into AT32AP700x devices. This will reboot
+	  your system when the timeout is reached.
+
+# BLACKFIN Architecture
+
+config BFIN_WDT
+	tristate "Blackfin On-Chip Watchdog Timer"
+	depends on BLACKFIN
+	---help---
+	  If you say yes here you will get support for the Blackfin On-Chip
+	  Watchdog Timer. If you have one of these processors and wish to
+	  have watchdog support enabled, say Y, otherwise say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_wdt.
+
+# CRIS Architecture
+
+# FRV Architecture
+
+# H8300 Architecture
+
+# X86 (i386 + ia64 + x86_64) Architecture
+
+config ACQUIRE_WDT
+	tristate "Acquire SBC Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on Single Board
+	  Computers produced by Acquire Inc (and others). This watchdog
+	  simply watches your kernel to make sure it doesn't freeze, and if
+	  it does, it reboots your computer after a certain amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acquirewdt.
+
+	  Most people will say N.
+
+config ADVANTECH_WDT
+	tristate "Advantech SBC Watchdog Timer"
+	depends on X86
+	help
+	  If you are configuring a Linux kernel for the Advantech single-board
+	  computer, say `Y' here to support its built-in watchdog timer
+	  feature. More information can be found at
+	  <http://www.advantech.com.tw/products/>
+
+config ALIM1535_WDT
+	tristate "ALi M1535 PMU Watchdog Timer"
+	depends on X86 && PCI
+	---help---
+	  This is the driver for the hardware watchdog on the ALi M1535 PMU.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called alim1535_wdt.
+
+	  Most people will say N.
+
+config ALIM7101_WDT
+	tristate "ALi M7101 PMU Computer Watchdog"
+	depends on PCI
+	help
+	  This is the driver for the hardware watchdog on the ALi M7101 PMU
+	  as used in the x86 Cobalt servers and also found in some
+	  SPARC Netra servers too.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called alim7101_wdt.
+
+	  Most people will say N.
+
+config GEODE_WDT
+	tristate "AMD Geode CS5535/CS5536 Watchdog"
+	depends on CS5535_MFGPT
+	help
+	  This driver enables a watchdog capability built into the
+	  CS5535/CS5536 companion chips for the AMD Geode GX and LX
+	  processors.  This watchdog watches your kernel to make sure
+	  it doesn't freeze, and if it does, it reboots your computer after
+	  a certain amount of time.
+
+	  You can compile this driver directly into the kernel, or use
+	  it as a module.  The module will be called geodewdt.
+
+config SC520_WDT
+	tristate "AMD Elan SC520 processor Watchdog"
+	depends on X86
+	help
+	  This is the driver for the hardware watchdog built in to the
+	  AMD "Elan" SC520 microcomputer commonly used in embedded systems.
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  You can compile this driver directly into the kernel, or use
+	  it as a module.  The module will be called sc520_wdt.
+
+config SBC_FITPC2_WATCHDOG
+	tristate "Compulab SBC-FITPC2 watchdog"
+	depends on X86
+	---help---
+	  This is the driver for the built-in watchdog timer on the fit-PC2,
+	  fit-PC2i, CM-iAM single-board computers made by Compulab.
+
+	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
+	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
+
+	  Entering BIOS setup temporary disables watchdog operation regardless to current state,
+	  so system will not be restarted while user in BIOS setup.
+
+	  Once watchdog was enabled the system will be restarted every
+	  "Watchdog Timer Value" period, so to prevent it user can restart or
+	  disable the watchdog.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc_fitpc2_wdt.
+
+	  Most people will say N.
+
+config EUROTECH_WDT
+	tristate "Eurotech CPU-1220/1410 Watchdog Timer"
+	depends on X86
+	help
+	  Enable support for the watchdog timer on the Eurotech CPU-1220 and
+	  CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
+	  information are at <http://www.eurotech.it/>.
+
+config IB700_WDT
+	tristate "IB700 SBC Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the IB700 Single
+	  Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
+	  simply watches your kernel to make sure it doesn't freeze, and if
+	  it does, it reboots your computer after a certain amount of time.
+
+	  This driver is like the WDT501 driver but for slightly different hardware.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ib700wdt.
+
+	  Most people will say N.
+
+config IBMASR
+	tristate "IBM Automatic Server Restart"
+	depends on X86
+	help
+	  This is the driver for the IBM Automatic Server Restart watchdog
+	  timer built-in into some eServer xSeries machines.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ibmasr.
+
+config WAFER_WDT
+	tristate "ICP Single Board Computer Watchdog Timer"
+	depends on X86
+	help
+	  This is a driver for the hardware watchdog on the ICP Single
+	  Board Computer. This driver is working on (at least) the following
+	  IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wafer5823wdt.
+
+config I6300ESB_WDT
+	tristate "Intel 6300ESB Timer/Watchdog"
+	depends on X86 && PCI
+	---help---
+	  Hardware driver for the watchdog timer built into the Intel
+	  6300ESB controller hub.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called i6300esb.
+
+config ITCO_WDT
+	tristate "Intel TCO Timer/Watchdog"
+	depends on (X86 || IA64) && PCI
+	---help---
+	  Hardware driver for the intel TCO timer based watchdog devices.
+	  These drivers are included in the Intel 82801 I/O Controller
+	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
+	  controller hub.
+
+	  The TCO (Total Cost of Ownership) timer is a watchdog timer
+	  that will reboot the machine after its second expiration. The
+	  expiration time can be configured with the "heartbeat" parameter.
+
+	  On some motherboards the driver may fail to reset the chipset's
+	  NO_REBOOT flag which prevents the watchdog from rebooting the
+	  machine. If this is the case you will get a kernel message like
+	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iTCO_wdt.
+
+config ITCO_VENDOR_SUPPORT
+	bool "Intel TCO Timer/Watchdog Specific Vendor Support"
+	depends on ITCO_WDT
+	---help---
+	  Add vendor specific support to the intel TCO timer based watchdog
+	  devices. At this moment we only have additional support for some
+	  SuperMicro Inc. motherboards.
+
+config IT8712F_WDT
+	tristate "IT8712F (Smart Guardian) Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the built-in watchdog timer on the IT8712F
+	  Super I/0 chipset used on many motherboards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called it8712f_wdt.
+
+config IT87_WDT
+	tristate "IT87 Watchdog Timer"
+	depends on X86 && EXPERIMENTAL
+	---help---
+	  This is the driver for the hardware watchdog on the ITE IT8716,
+	  IT8718, IT8726, IT8712(Version J,K) Super I/O chips. This watchdog
+	  simply watches your kernel to make sure it doesn't freeze, and if
+	  it does, it reboots your computer after a certain amount of time.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called it87_wdt.
+
+config HP_WATCHDOG
+	tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
+	depends on X86
+	help
+	  A software monitoring watchdog and NMI sourcing driver. This driver
+	  will detect lockups and provide stack trace. Also, when an NMI
+	  occurs this driver will make the necessary BIOS calls to log
+	  the cause of the NMI. This is a driver that will only load on a
+	  HP ProLiant system with a minimum of iLO2 support.
+	  To compile this driver as a module, choose M here: the
+	  module will be called hpwdt.
+
+config SC1200_WDT
+	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
+	depends on X86
+	help
+	  This is a driver for National Semiconductor PC87307/PC97307 hardware
+	  watchdog cards as found on the SC1200. This watchdog is mainly used
+	  for power management purposes and can be used to power down the device
+	  during inactivity periods (includes interrupt activity monitoring).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sc1200wdt.
+
+	  Most people will say N.
+
+config SCx200_WDT
+	tristate "National Semiconductor SCx200 Watchdog"
+	depends on SCx200 && PCI
+	help
+	  Enable the built-in watchdog timer support on the National
+	  Semiconductor SCx200 processors.
+
+	  If compiled as a module, it will be called scx200_wdt.
+
+config PC87413_WDT
+	tristate "NS PC87413 watchdog"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the PC87413 chipset
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pc87413_wdt.
+
+	  Most people will say N.
+
+config RDC321X_WDT
+	tristate "RDC R-321x SoC watchdog"
+	depends on X86_RDC321X
+	help
+	  This is the driver for the built in hardware watchdog
+	  in the RDC R-321x SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rdc321x_wdt.
+
+config 60XX_WDT
+	tristate "SBC-60XX Watchdog Timer"
+	depends on X86
+	help
+	  This driver can be used with the watchdog timer found on some
+	  single board computers, namely the 6010 PII based computer.
+	  It may well work with other cards.  It reads port 0x443 to enable
+	  and re-set the watchdog timer, and reads port 0x45 to disable
+	  the watchdog.  If you have a card that behave in similar ways,
+	  you can probably make this driver work with your card as well.
+
+	  You can compile this driver directly into the kernel, or use
+	  it as a module.  The module will be called sbc60xxwdt.
+
+config SBC8360_WDT
+	tristate "SBC8360 Watchdog Timer"
+	depends on X86
+	---help---
+
+	  This is the driver for the hardware watchdog on the SBC8360 Single
+	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc8360.
+
+	  Most people will say N.
+
+config SBC7240_WDT
+	tristate "SBC Nano 7240 Watchdog Timer"
+	depends on X86_32
+	---help---
+	  This is the driver for the hardware watchdog found on the IEI
+	  single board computers EPIC Nano 7240 (and likely others). This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc7240_wdt.
+
+config CPU5_WDT
+	tristate "SMA CPU5 Watchdog"
+	depends on X86
+	---help---
+	  TBD.
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpu5wdt.
+
+config SMSC_SCH311X_WDT
+	tristate "SMSC SCH311X Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog timer on the
+	  SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
+	  (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
+	  serial ports).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sch311x_wdt.
+
+config SMSC37B787_WDT
+	tristate "Winbond SMsC37B787 Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog component on the
+	  Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
+	  from Vision Systems and maybe others.
+
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  Usually a userspace daemon will notify the kernel WDT driver that
+	  userspace is still alive, at regular intervals.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called smsc37b787_wdt.
+
+	  Most people will say N.
+
+config W83627HF_WDT
+	tristate "W83627HF Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the W83627HF chipset
+	  as used in Advantech PC-9578 and Tyan S2721-533 motherboards
+	  (and likely others).  This watchdog simply watches your kernel to
+	  make sure it doesn't freeze, and if it does, it reboots your computer
+	  after a certain amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83627hf_wdt.
+
+	  Most people will say N.
+
+config W83697HF_WDT
+	tristate "W83697HF/W83697HG Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the W83697HF/HG
+	  chipset as used in Dedibox/VIA motherboards (and likely others).
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83697hf_wdt.
+
+	  Most people will say N.
+
+config W83697UG_WDT
+	tristate "W83697UG/W83697UF Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the W83697UG/UF
+	  chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others).
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83697ug_wdt.
+
+	  Most people will say N.
+
+config W83877F_WDT
+	tristate "W83877F (EMACS) Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the W83877F chipset
+	  as used in EMACS PC-104 motherboards (and likely others).  This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83877f_wdt.
+
+	  Most people will say N.
+
+config W83977F_WDT
+	tristate "W83977F (PCM-5335) Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the W83977F I/O chip
+	  as used in AAEON's PCM-5335 SBC (and likely others).  This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83977f_wdt.
+
+config MACHZ_WDT
+	tristate "ZF MachZ Watchdog"
+	depends on X86
+	---help---
+	  If you are using a ZF Micro MachZ processor, say Y here, otherwise
+	  N.  This is the driver for the watchdog timer built-in on that
+	  processor using ZF-Logic interface.  This watchdog simply watches
+	  your kernel to make sure it doesn't freeze, and if it does, it
+	  reboots your computer after a certain amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called machzwd.
+
+config SBC_EPX_C3_WATCHDOG
+	tristate "Winsystems SBC EPX-C3 watchdog"
+	depends on X86
+	---help---
+	  This is the driver for the built-in watchdog timer on the EPX-C3
+	  Single-board computer made by Winsystems, Inc.
+
+	  *Note*: This hardware watchdog is not probeable and thus there
+	  is no way to know if writing to its IO address will corrupt
+	  your system or have any real effect.  The only way to be sure
+	  that this driver does what you want is to make sure you
+	  are running it on an EPX-C3 from Winsystems with the watchdog
+	  timer at IO address 0x1ee and 0x1ef.  It will write to both those
+	  IO ports.  Basically, the assumption is made that if you compile
+	  this driver into your kernel and/or load it as a module, that you
+	  know what you are doing and that you are in fact running on an
+	  EPX-C3 board!
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc_epx_c3.
+
+# M32R Architecture
+
+# M68K Architecture
+
+# M68KNOMMU Architecture
+
+# MIPS Architecture
+
+config BCM47XX_WDT
+	tristate "Broadcom BCM47xx Watchdog Timer"
+	depends on BCM47XX
+	help
+	  Hardware driver for the Broadcom BCM47xx Watchog Timer.
+
+config RC32434_WDT
+	tristate "IDT RC32434 SoC Watchdog Timer"
+	depends on MIKROTIK_RB532
+	help
+	  Hardware driver for the IDT RC32434 SoC built-in
+	  watchdog timer.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rc32434_wdt.
+
+config INDYDOG
+	tristate "Indy/I2 Hardware Watchdog"
+	depends on SGI_HAS_INDYDOG
+	help
+	  Hardware driver for the Indy's/I2's watchdog. This is a
+	  watchdog timer that will reboot the machine after a 60 second
+	  timer expired and no process has written to /dev/watchdog during
+	  that time.
+
+config WDT_MTX1
+	tristate "MTX-1 Hardware Watchdog"
+	depends on MIPS_MTX1
+	help
+	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
+	  will reboot the machine after a 100 seconds timer expired.
+
+config PNX833X_WDT
+	tristate "PNX833x Hardware Watchdog"
+	depends on SOC_PNX8335
+	help
+	  Hardware driver for the PNX833x's watchdog. This is a
+	  watchdog timer that will reboot the machine after a programable
+	  timer has expired and no process has written to /dev/watchdog during
+	  that time.
+
+config SIBYTE_WDOG
+	tristate "Sibyte SoC hardware watchdog"
+	depends on CPU_SB1
+	help
+	  Watchdog driver for the built in watchdog hardware in Sibyte
+	  SoC processors.  There are apparently two watchdog timers
+	  on such processors; this driver supports only the first one,
+	  because currently Linux only supports exporting one watchdog
+	  to userspace.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called sb_wdog.
+
+config AR7_WDT
+	tristate "TI AR7 Watchdog Timer"
+	depends on AR7
+	help
+	  Hardware driver for the TI AR7 Watchdog Timer.
+
+config TXX9_WDT
+	tristate "Toshiba TXx9 Watchdog Timer"
+	depends on CPU_TX39XX || CPU_TX49XX
+	help
+	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
+# PARISC Architecture
+
+# POWERPC Architecture
+
+config GEF_WDT
+	tristate "GE Watchdog Timer"
+	depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
+	---help---
+	  Watchdog timer found in a number of GE single board computers.
+
+config MPC5200_WDT
+	bool "MPC52xx Watchdog Timer"
+	depends on PPC_MPC52xx
+	help
+	  Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
+
+config 8xxx_WDT
+	tristate "MPC8xxx Platform Watchdog Timer"
+	depends on PPC_8xx || PPC_83xx || PPC_86xx
+	help
+	  This driver is for a SoC level watchdog that exists on some
+	  Freescale PowerPC processors. So far this driver supports:
+	  - MPC8xx watchdogs
+	  - MPC83xx watchdogs
+	  - MPC86xx watchdogs
+
+	  For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
+
+config MV64X60_WDT
+	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
+	depends on MV64X60
+
+config PIKA_WDT
+	tristate "PIKA FPGA Watchdog"
+	depends on WARP
+	default y
+	help
+	  This enables the watchdog in the PIKA FPGA. Currently used on
+	  the Warp platform.
+
+config BOOKE_WDT
+	bool "PowerPC Book-E Watchdog Timer"
+	depends on BOOKE || 4xx
+	---help---
+	  Please see Documentation/watchdog/watchdog-api.txt for
+	  more information.
+
+# PPC64 Architecture
+
+config WATCHDOG_RTAS
+	tristate "RTAS watchdog"
+	depends on PPC_RTAS
+	help
+	  This driver adds watchdog support for the RTAS watchdog.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called wdrtas.
+
+# S390 Architecture
+
+config ZVM_WATCHDOG
+	tristate "z/VM Watchdog Timer"
+	depends on S390
+	help
+	  IBM s/390 and zSeries machines running under z/VM 5.1 or later
+	  provide a virtual watchdog timer to their guest that cause a
+	  user define Control Program command to be executed after a
+	  timeout.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called vmwatchdog.
+
+# SUPERH (sh + sh64) Architecture
+
+config SH_WDT
+	tristate "SuperH Watchdog"
+	depends on SUPERH && (CPU_SH3 || CPU_SH4)
+	help
+	  This driver adds watchdog support for the integrated watchdog in the
+	  SuperH processors. If you have one of these processors and wish
+	  to have watchdog support enabled, say Y, otherwise say N.
+
+	  As a side note, saying Y here will automatically boost HZ to 1000
+	  so that the timer has a chance to clear the overflow counter. On
+	  slower systems (such as the SH-2 and SH-3) this will likely yield
+	  some performance issues. As such, the WDT should be avoided here
+	  unless it is absolutely necessary.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called shwdt.
+
+config SH_WDT_MMAP
+	bool "Allow mmap of SH WDT"
+	default n
+	depends on SH_WDT
+	help
+	  If you say Y here, user applications will be able to mmap the
+	  WDT/CPG registers.
+
+# SPARC Architecture
+
+# SPARC64 Architecture
+
+config WATCHDOG_CP1XXX
+	tristate "CP1XXX Hardware Watchdog support"
+	depends on SPARC64 && PCI
+	---help---
+	  This is the driver for the hardware watchdog timers present on
+	  Sun Microsystems CompactPCI models CP1400 and CP1500.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpwatchdog.
+
+	  If you do not have a CompactPCI model CP1400 or CP1500, or
+	  another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
+	  you should say N to this option.
+
+config WATCHDOG_RIO
+	tristate "RIO Hardware Watchdog support"
+	depends on SPARC64 && PCI
+	help
+	  Say Y here to support the hardware watchdog capability on Sun RIO
+	  machines.  The watchdog timeout period is normally one minute but
+	  can be changed with a boot-time parameter.
+
+# XTENSA Architecture
+
+#
+# ISA-based Watchdog Cards
+#
+
+comment "ISA-based Watchdog Cards"
+	depends on ISA
+
+config PCWATCHDOG
+	tristate "Berkshire Products ISA-PC Watchdog"
+	depends on ISA
+	---help---
+	  This is the driver for the Berkshire Products ISA-PC Watchdog card.
+	  This card simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time. This driver is like the WDT501 driver but for different
+	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
+	  watchdog cards can be ordered from <http://www.berkprod.com/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcwd.
+
+	  Most people will say N.
+
+config MIXCOMWD
+	tristate "Mixcom Watchdog"
+	depends on ISA
+	---help---
+	  This is a driver for the Mixcom hardware watchdog cards.  This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mixcomwd.
+
+	  Most people will say N.
+
+config WDT
+	tristate "WDT Watchdog timer"
+	depends on ISA
+	---help---
+	  If you have a WDT500P or WDT501P watchdog board, say Y here,
+	  otherwise N. It is not possible to probe for this board, which means
+	  that you have to inform the kernel about the IO port and IRQ that
+	  is needed (you can do this via the io and irq parameters)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wdt.
+
+#
+# PCI-based Watchdog Cards
+#
+
+comment "PCI-based Watchdog Cards"
+	depends on PCI
+
+config PCIPCWATCHDOG
+	tristate "Berkshire Products PCI-PC Watchdog"
+	depends on PCI
+	---help---
+	  This is the driver for the Berkshire Products PCI-PC Watchdog card.
+	  This card simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time. The card can also monitor the internal temperature of the PC.
+	  More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcwd_pci.
+
+	  Most people will say N.
+
+config WDTPCI
+	tristate "PCI-WDT500/501 Watchdog timer"
+	depends on PCI
+	---help---
+	  If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
+
+	  If you have a PCI-WDT501 watchdog board then you can enable the
+	  temperature sensor by setting the type parameter to 501.
+
+	  If you want to enable the Fan Tachometer on the PCI-WDT501, then you
+	  can do this via the tachometer parameter. Only do this if you have a
+	  fan tachometer actually set up.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wdt_pci.
+
+#
+# USB-based Watchdog Cards
+#
+
+comment "USB-based Watchdog Cards"
+	depends on USB
+
+config USBPCWATCHDOG
+	tristate "Berkshire Products USB-PC Watchdog"
+	depends on USB
+	---help---
+	  This is the driver for the Berkshire Products USB-PC Watchdog card.
+	  This card simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time. The card can also monitor the internal temperature of the PC.
+	  More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcwd_usb.
+
+	  Most people will say N.
+
+endif # WATCHDOG
diff -Nur linux-2.6.35.7.orig/drivers/watchdog/Makefile linux-2.6.35.7/drivers/watchdog/Makefile
--- linux-2.6.35.7.orig/drivers/watchdog/Makefile	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/drivers/watchdog/Makefile	2010-10-14 20:28:01.588091787 +0200
@@ -114,6 +114,7 @@
 obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
 obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
 obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
 
 # PARISC Architecture
 
diff -Nur linux-2.6.35.7.orig/drivers/watchdog/Makefile.orig linux-2.6.35.7/drivers/watchdog/Makefile.orig
--- linux-2.6.35.7.orig/drivers/watchdog/Makefile.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/drivers/watchdog/Makefile.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,148 @@
+#
+# Makefile for the WatchDog device drivers.
+#
+
+# Only one watchdog can succeed. We probe the ISA/PCI/USB based
+# watchdog-cards first, then the architecture specific watchdog
+# drivers and then the architecture independant "softdog" driver.
+# This means that if your ISA/PCI/USB card isn't detected that
+# you can fall back to an architecture specific driver and if
+# that also fails then you can fall back to the software watchdog
+# to give you some cover.
+
+# ISA-based Watchdog Cards
+obj-$(CONFIG_PCWATCHDOG) += pcwd.o
+obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
+obj-$(CONFIG_WDT) += wdt.o
+
+# PCI-based Watchdog Cards
+obj-$(CONFIG_PCIPCWATCHDOG) += pcwd_pci.o
+obj-$(CONFIG_WDTPCI) += wdt_pci.o
+
+# USB-based Watchdog Cards
+obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
+
+# ALPHA Architecture
+
+# ARM Architecture
+obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
+obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
+obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
+obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o
+obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
+obj-$(CONFIG_977_WATCHDOG) += wdt977.o
+obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o
+obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
+obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
+obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
+obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
+obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
+obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
+obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
+obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
+obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
+obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
+obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
+obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
+obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
+obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
+obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
+obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
+
+# AVR32 Architecture
+obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
+
+# BLACKFIN Architecture
+obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
+
+# CRIS Architecture
+
+# FRV Architecture
+
+# H8300 Architecture
+
+# X86 (i386 + ia64 + x86_64) Architecture
+obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
+obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_GEODE_WDT) += geodewdt.o
+obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
+obj-$(CONFIG_SBC_FITPC2_WATCHDOG) += sbc_fitpc2_wdt.o
+obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
+obj-$(CONFIG_IB700_WDT) += ib700wdt.o
+obj-$(CONFIG_IBMASR) += ibmasr.o
+obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
+obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
+obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
+ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
+obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
+endif
+obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
+obj-$(CONFIG_IT87_WDT) += it87_wdt.o
+obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
+obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
+obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
+obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
+obj-$(CONFIG_RDC321X_WDT) += rdc321x_wdt.o
+obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
+obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
+obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o
+obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
+obj-$(CONFIG_SMSC_SCH311X_WDT) += sch311x_wdt.o
+obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
+obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
+obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o
+obj-$(CONFIG_W83697UG_WDT) += w83697ug_wdt.o
+obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
+obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
+obj-$(CONFIG_MACHZ_WDT) += machzwd.o
+obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
+
+# M32R Architecture
+
+# M68K Architecture
+
+# M68KNOMMU Architecture
+
+# MIPS Architecture
+obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
+obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
+obj-$(CONFIG_INDYDOG) += indydog.o
+obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
+obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+
+# PARISC Architecture
+
+# POWERPC Architecture
+obj-$(CONFIG_GEF_WDT) += gef_wdt.o
+obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
+obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
+obj-$(CONFIG_PIKA_WDT) += pika_wdt.o
+obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
+
+# PPC64 Architecture
+obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
+
+# S390 Architecture
+
+# SUPERH (sh + sh64) Architecture
+obj-$(CONFIG_SH_WDT) += shwdt.o
+
+# SPARC Architecture
+
+# SPARC64 Architecture
+
+obj-$(CONFIG_WATCHDOG_RIO)		+= riowd.o
+obj-$(CONFIG_WATCHDOG_CP1XXX)		+= cpwd.o
+
+# XTENSA Architecture
+
+# Architecture Independant
+obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
+obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
+obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
+obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff -Nur linux-2.6.35.7.orig/include/linux/ath9k_platform.h linux-2.6.35.7/include/linux/ath9k_platform.h
--- linux-2.6.35.7.orig/include/linux/ath9k_platform.h	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/include/linux/ath9k_platform.h	2010-10-14 20:28:01.618101105 +0200
@@ -1,19 +1,11 @@
 /*
- * Copyright (c) 2008 Atheros Communications Inc.
- * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ * ath9k platform data defines
  *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
  *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
  */
 
 #ifndef _LINUX_ATH9K_PLATFORM_H
@@ -23,6 +15,9 @@
 
 struct ath9k_platform_data {
 	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
+	u8 *macaddr;
+
+	unsigned long quirk_wndr3700:1;
 };
 
 #endif /* _LINUX_ATH9K_PLATFORM_H */
diff -Nur linux-2.6.35.7.orig/include/linux/gpio_buttons.h linux-2.6.35.7/include/linux/gpio_buttons.h
--- linux-2.6.35.7.orig/include/linux/gpio_buttons.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/include/linux/gpio_buttons.h	2010-10-14 20:28:01.679342332 +0200
@@ -0,0 +1,33 @@
+/*
+ *  Definitions for the GPIO buttons interface driver
+ *
+ *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This file was based on: /include/linux/gpio_keys.h
+ *	The original gpio_keys.h seems not to have a license.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _GPIO_BUTTONS_H_
+#define _GPIO_BUTTONS_H_
+
+struct gpio_button {
+	int	gpio;		/* GPIO line number */
+	int	active_low;
+	char	*desc;		/* button description */
+	int	type;		/* input event type (EV_KEY, EV_SW) */
+	int	code;		/* input event code (KEY_*, SW_*) */
+	int	threshold;	/* count threshold */
+};
+
+struct gpio_buttons_platform_data {
+	struct gpio_button *buttons;
+	int	nbuttons;		/* number of buttons */
+	int	poll_interval;		/* polling interval */
+};
+
+#endif /* _GPIO_BUTTONS_H_ */
diff -Nur linux-2.6.35.7.orig/include/linux/gpio_dev.h linux-2.6.35.7/include/linux/gpio_dev.h
--- linux-2.6.35.7.orig/include/linux/gpio_dev.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/include/linux/gpio_dev.h	2010-10-14 20:28:01.715601023 +0200
@@ -0,0 +1,11 @@
+#ifndef _GPIODEV_H__
+#define _GPIODEV_H__
+
+#define IOC_GPIODEV_MAGIC  'B'
+#define GPIO_GET        _IO(IOC_GPIODEV_MAGIC, 10)
+#define GPIO_SET        _IO(IOC_GPIODEV_MAGIC, 11)
+#define GPIO_CLEAR      _IO(IOC_GPIODEV_MAGIC, 12)
+#define GPIO_DIR_IN     _IO(IOC_GPIODEV_MAGIC, 13)
+#define GPIO_DIR_OUT    _IO(IOC_GPIODEV_MAGIC, 14)
+
+#endif
diff -Nur linux-2.6.35.7.orig/include/linux/netdevice.h linux-2.6.35.7/include/linux/netdevice.h
--- linux-2.6.35.7.orig/include/linux/netdevice.h	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/include/linux/netdevice.h	2010-10-14 20:28:01.758101230 +0200
@@ -932,6 +932,7 @@
 	void			*ax25_ptr;	/* AX.25 specific data */
 	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
 						   assign before registering */
+	void			*phy_ptr; /* PHY device specific data */
 
 /*
  * Cache line mostly used on receive path (including eth_type_trans())
diff -Nur linux-2.6.35.7.orig/include/linux/netdevice.h.orig linux-2.6.35.7/include/linux/netdevice.h.orig
--- linux-2.6.35.7.orig/include/linux/netdevice.h.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/include/linux/netdevice.h.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,2349 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Interfaces handler.
+ *
+ * Version:	@(#)dev.h	1.0.10	08/12/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Corey Minyard <wf-rch!minyard@relay.EU.net>
+ *		Donald J. Becker, <becker@cesdis.gsfc.nasa.gov>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Bjorn Ekwall. <bj0rn@blox.se>
+ *              Pekka Riikonen <priikone@poseidon.pspt.fi>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *		Moved to /usr/include/linux for NET3
+ */
+#ifndef _LINUX_NETDEVICE_H
+#define _LINUX_NETDEVICE_H
+
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/if_link.h>
+
+#ifdef __KERNEL__
+#include <linux/pm_qos_params.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <asm/atomic.h>
+#include <asm/cache.h>
+#include <asm/byteorder.h>
+
+#include <linux/device.h>
+#include <linux/percpu.h>
+#include <linux/rculist.h>
+#include <linux/dmaengine.h>
+#include <linux/workqueue.h>
+
+#include <linux/ethtool.h>
+#include <net/net_namespace.h>
+#include <net/dsa.h>
+#ifdef CONFIG_DCB
+#include <net/dcbnl.h>
+#endif
+
+struct vlan_group;
+struct netpoll_info;
+/* 802.11 specific */
+struct wireless_dev;
+					/* source back-compat hooks */
+#define SET_ETHTOOL_OPS(netdev,ops) \
+	( (netdev)->ethtool_ops = (ops) )
+
+#define HAVE_ALLOC_NETDEV		/* feature macro: alloc_xxxdev
+					   functions are available. */
+#define HAVE_FREE_NETDEV		/* free_netdev() */
+#define HAVE_NETDEV_PRIV		/* netdev_priv() */
+
+/* Backlog congestion levels */
+#define NET_RX_SUCCESS		0	/* keep 'em coming, baby */
+#define NET_RX_DROP		1	/* packet dropped */
+
+/*
+ * Transmit return codes: transmit return codes originate from three different
+ * namespaces:
+ *
+ * - qdisc return codes
+ * - driver transmit return codes
+ * - errno values
+ *
+ * Drivers are allowed to return any one of those in their hard_start_xmit()
+ * function. Real network devices commonly used with qdiscs should only return
+ * the driver transmit return codes though - when qdiscs are used, the actual
+ * transmission happens asynchronously, so the value is not propagated to
+ * higher layers. Virtual network devices transmit synchronously, in this case
+ * the driver transmit return codes are consumed by dev_queue_xmit(), all
+ * others are propagated to higher layers.
+ */
+
+/* qdisc ->enqueue() return codes. */
+#define NET_XMIT_SUCCESS	0x00
+#define NET_XMIT_DROP		0x01	/* skb dropped			*/
+#define NET_XMIT_CN		0x02	/* congestion notification	*/
+#define NET_XMIT_POLICED	0x03	/* skb is shot by police	*/
+#define NET_XMIT_MASK		0x0f	/* qdisc flags in net/sch_generic.h */
+
+/* NET_XMIT_CN is special. It does not guarantee that this packet is lost. It
+ * indicates that the device will soon be dropping packets, or already drops
+ * some packets of the same priority; prompting us to send less aggressively. */
+#define net_xmit_eval(e)	((e) == NET_XMIT_CN ? 0 : (e))
+#define net_xmit_errno(e)	((e) != NET_XMIT_CN ? -ENOBUFS : 0)
+
+/* Driver transmit return codes */
+#define NETDEV_TX_MASK		0xf0
+
+enum netdev_tx {
+	__NETDEV_TX_MIN	 = INT_MIN,	/* make sure enum is signed */
+	NETDEV_TX_OK	 = 0x00,	/* driver took care of packet */
+	NETDEV_TX_BUSY	 = 0x10,	/* driver tx path was busy*/
+	NETDEV_TX_LOCKED = 0x20,	/* driver tx lock was already taken */
+};
+typedef enum netdev_tx netdev_tx_t;
+
+/*
+ * Current order: NETDEV_TX_MASK > NET_XMIT_MASK >= 0 is significant;
+ * hard_start_xmit() return < NET_XMIT_MASK means skb was consumed.
+ */
+static inline bool dev_xmit_complete(int rc)
+{
+	/*
+	 * Positive cases with an skb consumed by a driver:
+	 * - successful transmission (rc == NETDEV_TX_OK)
+	 * - error while transmitting (rc < 0)
+	 * - error while queueing to a different device (rc & NET_XMIT_MASK)
+	 */
+	if (likely(rc < NET_XMIT_MASK))
+		return true;
+
+	return false;
+}
+
+#endif
+
+#define MAX_ADDR_LEN	32		/* Largest hardware address length */
+
+#ifdef  __KERNEL__
+/*
+ *	Compute the worst case header length according to the protocols
+ *	used.
+ */
+
+#if defined(CONFIG_WLAN) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+# if defined(CONFIG_MAC80211_MESH)
+#  define LL_MAX_HEADER 128
+# else
+#  define LL_MAX_HEADER 96
+# endif
+#elif defined(CONFIG_TR) || defined(CONFIG_TR_MODULE)
+# define LL_MAX_HEADER 48
+#else
+# define LL_MAX_HEADER 32
+#endif
+
+#if !defined(CONFIG_NET_IPIP) && !defined(CONFIG_NET_IPIP_MODULE) && \
+    !defined(CONFIG_NET_IPGRE) &&  !defined(CONFIG_NET_IPGRE_MODULE) && \
+    !defined(CONFIG_IPV6_SIT) && !defined(CONFIG_IPV6_SIT_MODULE) && \
+    !defined(CONFIG_IPV6_TUNNEL) && !defined(CONFIG_IPV6_TUNNEL_MODULE)
+#define MAX_HEADER LL_MAX_HEADER
+#else
+#define MAX_HEADER (LL_MAX_HEADER + 48)
+#endif
+
+#endif  /*  __KERNEL__  */
+
+/*
+ *	Network device statistics. Akin to the 2.0 ether stats but
+ *	with byte counters.
+ */
+
+struct net_device_stats {
+	unsigned long	rx_packets;		/* total packets received	*/
+	unsigned long	tx_packets;		/* total packets transmitted	*/
+	unsigned long	rx_bytes;		/* total bytes received 	*/
+	unsigned long	tx_bytes;		/* total bytes transmitted	*/
+	unsigned long	rx_errors;		/* bad packets received		*/
+	unsigned long	tx_errors;		/* packet transmit problems	*/
+	unsigned long	rx_dropped;		/* no space in linux buffers	*/
+	unsigned long	tx_dropped;		/* no space available in linux	*/
+	unsigned long	multicast;		/* multicast packets received	*/
+	unsigned long	collisions;
+
+	/* detailed rx_errors: */
+	unsigned long	rx_length_errors;
+	unsigned long	rx_over_errors;		/* receiver ring buff overflow	*/
+	unsigned long	rx_crc_errors;		/* recved pkt with crc error	*/
+	unsigned long	rx_frame_errors;	/* recv'd frame alignment error */
+	unsigned long	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	unsigned long	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	unsigned long	tx_aborted_errors;
+	unsigned long	tx_carrier_errors;
+	unsigned long	tx_fifo_errors;
+	unsigned long	tx_heartbeat_errors;
+	unsigned long	tx_window_errors;
+	
+	/* for cslip etc */
+	unsigned long	rx_compressed;
+	unsigned long	tx_compressed;
+};
+
+
+/* Media selection options. */
+enum {
+        IF_PORT_UNKNOWN = 0,
+        IF_PORT_10BASE2,
+        IF_PORT_10BASET,
+        IF_PORT_AUI,
+        IF_PORT_100BASET,
+        IF_PORT_100BASETX,
+        IF_PORT_100BASEFX
+};
+
+#ifdef __KERNEL__
+
+#include <linux/cache.h>
+#include <linux/skbuff.h>
+
+struct neighbour;
+struct neigh_parms;
+struct sk_buff;
+
+struct netdev_hw_addr {
+	struct list_head	list;
+	unsigned char		addr[MAX_ADDR_LEN];
+	unsigned char		type;
+#define NETDEV_HW_ADDR_T_LAN		1
+#define NETDEV_HW_ADDR_T_SAN		2
+#define NETDEV_HW_ADDR_T_SLAVE		3
+#define NETDEV_HW_ADDR_T_UNICAST	4
+#define NETDEV_HW_ADDR_T_MULTICAST	5
+	int			refcount;
+	bool			synced;
+	bool			global_use;
+	struct rcu_head		rcu_head;
+};
+
+struct netdev_hw_addr_list {
+	struct list_head	list;
+	int			count;
+};
+
+#define netdev_hw_addr_list_count(l) ((l)->count)
+#define netdev_hw_addr_list_empty(l) (netdev_hw_addr_list_count(l) == 0)
+#define netdev_hw_addr_list_for_each(ha, l) \
+	list_for_each_entry(ha, &(l)->list, list)
+
+#define netdev_uc_count(dev) netdev_hw_addr_list_count(&(dev)->uc)
+#define netdev_uc_empty(dev) netdev_hw_addr_list_empty(&(dev)->uc)
+#define netdev_for_each_uc_addr(ha, dev) \
+	netdev_hw_addr_list_for_each(ha, &(dev)->uc)
+
+#define netdev_mc_count(dev) netdev_hw_addr_list_count(&(dev)->mc)
+#define netdev_mc_empty(dev) netdev_hw_addr_list_empty(&(dev)->mc)
+#define netdev_for_each_mc_addr(ha, dev) \
+	netdev_hw_addr_list_for_each(ha, &(dev)->mc)
+
+struct hh_cache {
+	struct hh_cache *hh_next;	/* Next entry			     */
+	atomic_t	hh_refcnt;	/* number of users                   */
+/*
+ * We want hh_output, hh_len, hh_lock and hh_data be a in a separate
+ * cache line on SMP.
+ * They are mostly read, but hh_refcnt may be changed quite frequently,
+ * incurring cache line ping pongs.
+ */
+	__be16		hh_type ____cacheline_aligned_in_smp;
+					/* protocol identifier, f.e ETH_P_IP
+                                         *  NOTE:  For VLANs, this will be the
+                                         *  encapuslated type. --BLG
+                                         */
+	u16		hh_len;		/* length of header */
+	int		(*hh_output)(struct sk_buff *skb);
+	seqlock_t	hh_lock;
+
+	/* cached hardware header; allow for machine alignment needs.        */
+#define HH_DATA_MOD	16
+#define HH_DATA_OFF(__len) \
+	(HH_DATA_MOD - (((__len - 1) & (HH_DATA_MOD - 1)) + 1))
+#define HH_DATA_ALIGN(__len) \
+	(((__len)+(HH_DATA_MOD-1))&~(HH_DATA_MOD - 1))
+	unsigned long	hh_data[HH_DATA_ALIGN(LL_MAX_HEADER) / sizeof(long)];
+};
+
+/* Reserve HH_DATA_MOD byte aligned hard_header_len, but at least that much.
+ * Alternative is:
+ *   dev->hard_header_len ? (dev->hard_header_len +
+ *                           (HH_DATA_MOD - 1)) & ~(HH_DATA_MOD - 1) : 0
+ *
+ * We could use other alignment values, but we must maintain the
+ * relationship HH alignment <= LL alignment.
+ *
+ * LL_ALLOCATED_SPACE also takes into account the tailroom the device
+ * may need.
+ */
+#define LL_RESERVED_SPACE(dev) \
+	((((dev)->hard_header_len+(dev)->needed_headroom)&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+#define LL_RESERVED_SPACE_EXTRA(dev,extra) \
+	((((dev)->hard_header_len+(dev)->needed_headroom+(extra))&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+#define LL_ALLOCATED_SPACE(dev) \
+	((((dev)->hard_header_len+(dev)->needed_headroom+(dev)->needed_tailroom)&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+
+struct header_ops {
+	int	(*create) (struct sk_buff *skb, struct net_device *dev,
+			   unsigned short type, const void *daddr,
+			   const void *saddr, unsigned len);
+	int	(*parse)(const struct sk_buff *skb, unsigned char *haddr);
+	int	(*rebuild)(struct sk_buff *skb);
+#define HAVE_HEADER_CACHE
+	int	(*cache)(const struct neighbour *neigh, struct hh_cache *hh);
+	void	(*cache_update)(struct hh_cache *hh,
+				const struct net_device *dev,
+				const unsigned char *haddr);
+};
+
+/* These flag bits are private to the generic network queueing
+ * layer, they may not be explicitly referenced by any other
+ * code.
+ */
+
+enum netdev_state_t {
+	__LINK_STATE_START,
+	__LINK_STATE_PRESENT,
+	__LINK_STATE_NOCARRIER,
+	__LINK_STATE_LINKWATCH_PENDING,
+	__LINK_STATE_DORMANT,
+};
+
+
+/*
+ * This structure holds at boot time configured netdevice settings. They
+ * are then used in the device probing.
+ */
+struct netdev_boot_setup {
+	char name[IFNAMSIZ];
+	struct ifmap map;
+};
+#define NETDEV_BOOT_SETUP_MAX 8
+
+extern int __init netdev_boot_setup(char *str);
+
+/*
+ * Structure for NAPI scheduling similar to tasklet but with weighting
+ */
+struct napi_struct {
+	/* The poll_list must only be managed by the entity which
+	 * changes the state of the NAPI_STATE_SCHED bit.  This means
+	 * whoever atomically sets that bit can add this napi_struct
+	 * to the per-cpu poll_list, and whoever clears that bit
+	 * can remove from the list right before clearing the bit.
+	 */
+	struct list_head	poll_list;
+
+	unsigned long		state;
+	int			weight;
+	int			(*poll)(struct napi_struct *, int);
+#ifdef CONFIG_NETPOLL
+	spinlock_t		poll_lock;
+	int			poll_owner;
+#endif
+
+	unsigned int		gro_count;
+
+	struct net_device	*dev;
+	struct list_head	dev_list;
+	struct sk_buff		*gro_list;
+	struct sk_buff		*skb;
+};
+
+enum {
+	NAPI_STATE_SCHED,	/* Poll is scheduled */
+	NAPI_STATE_DISABLE,	/* Disable pending */
+	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
+};
+
+enum gro_result {
+	GRO_MERGED,
+	GRO_MERGED_FREE,
+	GRO_HELD,
+	GRO_NORMAL,
+	GRO_DROP,
+};
+typedef enum gro_result gro_result_t;
+
+extern void __napi_schedule(struct napi_struct *n);
+
+static inline int napi_disable_pending(struct napi_struct *n)
+{
+	return test_bit(NAPI_STATE_DISABLE, &n->state);
+}
+
+/**
+ *	napi_schedule_prep - check if napi can be scheduled
+ *	@n: napi context
+ *
+ * Test if NAPI routine is already running, and if not mark
+ * it as running.  This is used as a condition variable
+ * insure only one NAPI poll instance runs.  We also make
+ * sure there is no pending NAPI disable.
+ */
+static inline int napi_schedule_prep(struct napi_struct *n)
+{
+	return !napi_disable_pending(n) &&
+		!test_and_set_bit(NAPI_STATE_SCHED, &n->state);
+}
+
+/**
+ *	napi_schedule - schedule NAPI poll
+ *	@n: napi context
+ *
+ * Schedule NAPI poll routine to be called if it is not already
+ * running.
+ */
+static inline void napi_schedule(struct napi_struct *n)
+{
+	if (napi_schedule_prep(n))
+		__napi_schedule(n);
+}
+
+/* Try to reschedule poll. Called by dev->poll() after napi_complete().  */
+static inline int napi_reschedule(struct napi_struct *napi)
+{
+	if (napi_schedule_prep(napi)) {
+		__napi_schedule(napi);
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ *	napi_complete - NAPI processing complete
+ *	@n: napi context
+ *
+ * Mark NAPI processing as complete.
+ */
+extern void __napi_complete(struct napi_struct *n);
+extern void napi_complete(struct napi_struct *n);
+
+/**
+ *	napi_disable - prevent NAPI from scheduling
+ *	@n: napi context
+ *
+ * Stop NAPI from being scheduled on this context.
+ * Waits till any outstanding processing completes.
+ */
+static inline void napi_disable(struct napi_struct *n)
+{
+	set_bit(NAPI_STATE_DISABLE, &n->state);
+	while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
+		msleep(1);
+	clear_bit(NAPI_STATE_DISABLE, &n->state);
+}
+
+/**
+ *	napi_enable - enable NAPI scheduling
+ *	@n: napi context
+ *
+ * Resume NAPI from being scheduled on this context.
+ * Must be paired with napi_disable.
+ */
+static inline void napi_enable(struct napi_struct *n)
+{
+	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
+	smp_mb__before_clear_bit();
+	clear_bit(NAPI_STATE_SCHED, &n->state);
+}
+
+#ifdef CONFIG_SMP
+/**
+ *	napi_synchronize - wait until NAPI is not running
+ *	@n: napi context
+ *
+ * Wait until NAPI is done being scheduled on this context.
+ * Waits till any outstanding processing completes but
+ * does not disable future activations.
+ */
+static inline void napi_synchronize(const struct napi_struct *n)
+{
+	while (test_bit(NAPI_STATE_SCHED, &n->state))
+		msleep(1);
+}
+#else
+# define napi_synchronize(n)	barrier()
+#endif
+
+enum netdev_queue_state_t {
+	__QUEUE_STATE_XOFF,
+	__QUEUE_STATE_FROZEN,
+};
+
+struct netdev_queue {
+/*
+ * read mostly part
+ */
+	struct net_device	*dev;
+	struct Qdisc		*qdisc;
+	unsigned long		state;
+	struct Qdisc		*qdisc_sleeping;
+/*
+ * write mostly part
+ */
+	spinlock_t		_xmit_lock ____cacheline_aligned_in_smp;
+	int			xmit_lock_owner;
+	/*
+	 * please use this field instead of dev->trans_start
+	 */
+	unsigned long		trans_start;
+	unsigned long		tx_bytes;
+	unsigned long		tx_packets;
+	unsigned long		tx_dropped;
+} ____cacheline_aligned_in_smp;
+
+#ifdef CONFIG_RPS
+/*
+ * This structure holds an RPS map which can be of variable length.  The
+ * map is an array of CPUs.
+ */
+struct rps_map {
+	unsigned int len;
+	struct rcu_head rcu;
+	u16 cpus[0];
+};
+#define RPS_MAP_SIZE(_num) (sizeof(struct rps_map) + (_num * sizeof(u16)))
+
+/*
+ * The rps_dev_flow structure contains the mapping of a flow to a CPU and the
+ * tail pointer for that CPU's input queue at the time of last enqueue.
+ */
+struct rps_dev_flow {
+	u16 cpu;
+	u16 fill;
+	unsigned int last_qtail;
+};
+
+/*
+ * The rps_dev_flow_table structure contains a table of flow mappings.
+ */
+struct rps_dev_flow_table {
+	unsigned int mask;
+	struct rcu_head rcu;
+	struct work_struct free_work;
+	struct rps_dev_flow flows[0];
+};
+#define RPS_DEV_FLOW_TABLE_SIZE(_num) (sizeof(struct rps_dev_flow_table) + \
+    (_num * sizeof(struct rps_dev_flow)))
+
+/*
+ * The rps_sock_flow_table contains mappings of flows to the last CPU
+ * on which they were processed by the application (set in recvmsg).
+ */
+struct rps_sock_flow_table {
+	unsigned int mask;
+	u16 ents[0];
+};
+#define	RPS_SOCK_FLOW_TABLE_SIZE(_num) (sizeof(struct rps_sock_flow_table) + \
+    (_num * sizeof(u16)))
+
+#define RPS_NO_CPU 0xffff
+
+static inline void rps_record_sock_flow(struct rps_sock_flow_table *table,
+					u32 hash)
+{
+	if (table && hash) {
+		unsigned int cpu, index = hash & table->mask;
+
+		/* We only give a hint, preemption can change cpu under us */
+		cpu = raw_smp_processor_id();
+
+		if (table->ents[index] != cpu)
+			table->ents[index] = cpu;
+	}
+}
+
+static inline void rps_reset_sock_flow(struct rps_sock_flow_table *table,
+				       u32 hash)
+{
+	if (table && hash)
+		table->ents[hash & table->mask] = RPS_NO_CPU;
+}
+
+extern struct rps_sock_flow_table *rps_sock_flow_table;
+
+/* This structure contains an instance of an RX queue. */
+struct netdev_rx_queue {
+	struct rps_map *rps_map;
+	struct rps_dev_flow_table *rps_flow_table;
+	struct kobject kobj;
+	struct netdev_rx_queue *first;
+	atomic_t count;
+} ____cacheline_aligned_in_smp;
+#endif /* CONFIG_RPS */
+
+/*
+ * This structure defines the management hooks for network devices.
+ * The following hooks can be defined; unless noted otherwise, they are
+ * optional and can be filled with a null pointer.
+ *
+ * int (*ndo_init)(struct net_device *dev);
+ *     This function is called once when network device is registered.
+ *     The network device can use this to any late stage initializaton
+ *     or semantic validattion. It can fail with an error code which will
+ *     be propogated back to register_netdev
+ *
+ * void (*ndo_uninit)(struct net_device *dev);
+ *     This function is called when device is unregistered or when registration
+ *     fails. It is not called if init fails.
+ *
+ * int (*ndo_open)(struct net_device *dev);
+ *     This function is called when network device transistions to the up
+ *     state.
+ *
+ * int (*ndo_stop)(struct net_device *dev);
+ *     This function is called when network device transistions to the down
+ *     state.
+ *
+ * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb,
+ *                               struct net_device *dev);
+ *	Called when a packet needs to be transmitted.
+ *	Must return NETDEV_TX_OK , NETDEV_TX_BUSY.
+ *        (can also return NETDEV_TX_LOCKED iff NETIF_F_LLTX)
+ *	Required can not be NULL.
+ *
+ * u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb);
+ *	Called to decide which queue to when device supports multiple
+ *	transmit queues.
+ *
+ * void (*ndo_change_rx_flags)(struct net_device *dev, int flags);
+ *	This function is called to allow device receiver to make
+ *	changes to configuration when multicast or promiscious is enabled.
+ *
+ * void (*ndo_set_rx_mode)(struct net_device *dev);
+ *	This function is called device changes address list filtering.
+ *
+ * void (*ndo_set_multicast_list)(struct net_device *dev);
+ *	This function is called when the multicast address list changes.
+ *
+ * int (*ndo_set_mac_address)(struct net_device *dev, void *addr);
+ *	This function  is called when the Media Access Control address
+ *	needs to be changed. If this interface is not defined, the
+ *	mac address can not be changed.
+ *
+ * int (*ndo_validate_addr)(struct net_device *dev);
+ *	Test if Media Access Control address is valid for the device.
+ *
+ * int (*ndo_do_ioctl)(struct net_device *dev, struct ifreq *ifr, int cmd);
+ *	Called when a user request an ioctl which can't be handled by
+ *	the generic interface code. If not defined ioctl's return
+ *	not supported error code.
+ *
+ * int (*ndo_set_config)(struct net_device *dev, struct ifmap *map);
+ *	Used to set network devices bus interface parameters. This interface
+ *	is retained for legacy reason, new devices should use the bus
+ *	interface (PCI) for low level management.
+ *
+ * int (*ndo_change_mtu)(struct net_device *dev, int new_mtu);
+ *	Called when a user wants to change the Maximum Transfer Unit
+ *	of a device. If not defined, any request to change MTU will
+ *	will return an error.
+ *
+ * void (*ndo_tx_timeout)(struct net_device *dev);
+ *	Callback uses when the transmitter has not made any progress
+ *	for dev->watchdog ticks.
+ *
+ * struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
+ *	Called when a user wants to get the network device usage
+ *	statistics. If not defined, the counters in dev->stats will
+ *	be used.
+ *
+ * void (*ndo_vlan_rx_register)(struct net_device *dev, struct vlan_group *grp);
+ *	If device support VLAN receive accleration
+ *	(ie. dev->features & NETIF_F_HW_VLAN_RX), then this function is called
+ *	when vlan groups for the device changes.  Note: grp is NULL
+ *	if no vlan's groups are being used.
+ *
+ * void (*ndo_vlan_rx_add_vid)(struct net_device *dev, unsigned short vid);
+ *	If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER)
+ *	this function is called when a VLAN id is registered.
+ *
+ * void (*ndo_vlan_rx_kill_vid)(struct net_device *dev, unsigned short vid);
+ *	If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER)
+ *	this function is called when a VLAN id is unregistered.
+ *
+ * void (*ndo_poll_controller)(struct net_device *dev);
+ *
+ *	SR-IOV management functions.
+ * int (*ndo_set_vf_mac)(struct net_device *dev, int vf, u8* mac);
+ * int (*ndo_set_vf_vlan)(struct net_device *dev, int vf, u16 vlan, u8 qos);
+ * int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate);
+ * int (*ndo_get_vf_config)(struct net_device *dev,
+ *			    int vf, struct ifla_vf_info *ivf);
+ * int (*ndo_set_vf_port)(struct net_device *dev, int vf,
+ *			  struct nlattr *port[]);
+ * int (*ndo_get_vf_port)(struct net_device *dev, int vf, struct sk_buff *skb);
+ */
+#define HAVE_NET_DEVICE_OPS
+struct net_device_ops {
+	int			(*ndo_init)(struct net_device *dev);
+	void			(*ndo_uninit)(struct net_device *dev);
+	int			(*ndo_open)(struct net_device *dev);
+	int			(*ndo_stop)(struct net_device *dev);
+	netdev_tx_t		(*ndo_start_xmit) (struct sk_buff *skb,
+						   struct net_device *dev);
+	u16			(*ndo_select_queue)(struct net_device *dev,
+						    struct sk_buff *skb);
+	void			(*ndo_change_rx_flags)(struct net_device *dev,
+						       int flags);
+	void			(*ndo_set_rx_mode)(struct net_device *dev);
+	void			(*ndo_set_multicast_list)(struct net_device *dev);
+	int			(*ndo_set_mac_address)(struct net_device *dev,
+						       void *addr);
+	int			(*ndo_validate_addr)(struct net_device *dev);
+	int			(*ndo_do_ioctl)(struct net_device *dev,
+					        struct ifreq *ifr, int cmd);
+	int			(*ndo_set_config)(struct net_device *dev,
+					          struct ifmap *map);
+	int			(*ndo_change_mtu)(struct net_device *dev,
+						  int new_mtu);
+	int			(*ndo_neigh_setup)(struct net_device *dev,
+						   struct neigh_parms *);
+	void			(*ndo_tx_timeout) (struct net_device *dev);
+
+	struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
+
+	void			(*ndo_vlan_rx_register)(struct net_device *dev,
+						        struct vlan_group *grp);
+	void			(*ndo_vlan_rx_add_vid)(struct net_device *dev,
+						       unsigned short vid);
+	void			(*ndo_vlan_rx_kill_vid)(struct net_device *dev,
+						        unsigned short vid);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	void                    (*ndo_poll_controller)(struct net_device *dev);
+	void			(*ndo_netpoll_cleanup)(struct net_device *dev);
+#endif
+	int			(*ndo_set_vf_mac)(struct net_device *dev,
+						  int queue, u8 *mac);
+	int			(*ndo_set_vf_vlan)(struct net_device *dev,
+						   int queue, u16 vlan, u8 qos);
+	int			(*ndo_set_vf_tx_rate)(struct net_device *dev,
+						      int vf, int rate);
+	int			(*ndo_get_vf_config)(struct net_device *dev,
+						     int vf,
+						     struct ifla_vf_info *ivf);
+	int			(*ndo_set_vf_port)(struct net_device *dev,
+						   int vf,
+						   struct nlattr *port[]);
+	int			(*ndo_get_vf_port)(struct net_device *dev,
+						   int vf, struct sk_buff *skb);
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+	int			(*ndo_fcoe_enable)(struct net_device *dev);
+	int			(*ndo_fcoe_disable)(struct net_device *dev);
+	int			(*ndo_fcoe_ddp_setup)(struct net_device *dev,
+						      u16 xid,
+						      struct scatterlist *sgl,
+						      unsigned int sgc);
+	int			(*ndo_fcoe_ddp_done)(struct net_device *dev,
+						     u16 xid);
+#define NETDEV_FCOE_WWNN 0
+#define NETDEV_FCOE_WWPN 1
+	int			(*ndo_fcoe_get_wwn)(struct net_device *dev,
+						    u64 *wwn, int type);
+#endif
+};
+
+/*
+ *	The DEVICE structure.
+ *	Actually, this whole structure is a big mistake.  It mixes I/O
+ *	data with strictly "high-level" data, and it has to know about
+ *	almost every data structure used in the INET module.
+ *
+ *	FIXME: cleanup struct net_device such that network protocol info
+ *	moves out.
+ */
+
+struct net_device {
+
+	/*
+	 * This is the first field of the "visible" part of this structure
+	 * (i.e. as seen by users in the "Space.c" file).  It is the name
+	 * the interface.
+	 */
+	char			name[IFNAMSIZ];
+
+	struct pm_qos_request_list *pm_qos_req;
+
+	/* device name hash chain */
+	struct hlist_node	name_hlist;
+	/* snmp alias */
+	char 			*ifalias;
+
+	/*
+	 *	I/O specific fields
+	 *	FIXME: Merge these and struct ifmap into one
+	 */
+	unsigned long		mem_end;	/* shared mem end	*/
+	unsigned long		mem_start;	/* shared mem start	*/
+	unsigned long		base_addr;	/* device I/O address	*/
+	unsigned int		irq;		/* device IRQ number	*/
+
+	/*
+	 *	Some hardware also needs these fields, but they are not
+	 *	part of the usual set specified in Space.c.
+	 */
+
+	unsigned char		if_port;	/* Selectable AUI, TP,..*/
+	unsigned char		dma;		/* DMA channel		*/
+
+	unsigned long		state;
+
+	struct list_head	dev_list;
+	struct list_head	napi_list;
+	struct list_head	unreg_list;
+
+	/* Net device features */
+	unsigned long		features;
+#define NETIF_F_SG		1	/* Scatter/gather IO. */
+#define NETIF_F_IP_CSUM		2	/* Can checksum TCP/UDP over IPv4. */
+#define NETIF_F_NO_CSUM		4	/* Does not require checksum. F.e. loopack. */
+#define NETIF_F_HW_CSUM		8	/* Can checksum all the packets. */
+#define NETIF_F_IPV6_CSUM	16	/* Can checksum TCP/UDP over IPV6 */
+#define NETIF_F_HIGHDMA		32	/* Can DMA to high memory. */
+#define NETIF_F_FRAGLIST	64	/* Scatter/gather IO. */
+#define NETIF_F_HW_VLAN_TX	128	/* Transmit VLAN hw acceleration */
+#define NETIF_F_HW_VLAN_RX	256	/* Receive VLAN hw acceleration */
+#define NETIF_F_HW_VLAN_FILTER	512	/* Receive filtering on VLAN */
+#define NETIF_F_VLAN_CHALLENGED	1024	/* Device cannot handle VLAN packets */
+#define NETIF_F_GSO		2048	/* Enable software GSO. */
+#define NETIF_F_LLTX		4096	/* LockLess TX - deprecated. Please */
+					/* do not use LLTX in new drivers */
+#define NETIF_F_NETNS_LOCAL	8192	/* Does not change network namespaces */
+#define NETIF_F_GRO		16384	/* Generic receive offload */
+#define NETIF_F_LRO		32768	/* large receive offload */
+
+/* the GSO_MASK reserves bits 16 through 23 */
+#define NETIF_F_FCOE_CRC	(1 << 24) /* FCoE CRC32 */
+#define NETIF_F_SCTP_CSUM	(1 << 25) /* SCTP checksum offload */
+#define NETIF_F_FCOE_MTU	(1 << 26) /* Supports max FCoE MTU, 2158 bytes*/
+#define NETIF_F_NTUPLE		(1 << 27) /* N-tuple filters supported */
+#define NETIF_F_RXHASH		(1 << 28) /* Receive hashing offload */
+
+	/* Segmentation offload features */
+#define NETIF_F_GSO_SHIFT	16
+#define NETIF_F_GSO_MASK	0x00ff0000
+#define NETIF_F_TSO		(SKB_GSO_TCPV4 << NETIF_F_GSO_SHIFT)
+#define NETIF_F_UFO		(SKB_GSO_UDP << NETIF_F_GSO_SHIFT)
+#define NETIF_F_GSO_ROBUST	(SKB_GSO_DODGY << NETIF_F_GSO_SHIFT)
+#define NETIF_F_TSO_ECN		(SKB_GSO_TCP_ECN << NETIF_F_GSO_SHIFT)
+#define NETIF_F_TSO6		(SKB_GSO_TCPV6 << NETIF_F_GSO_SHIFT)
+#define NETIF_F_FSO		(SKB_GSO_FCOE << NETIF_F_GSO_SHIFT)
+
+	/* List of features with software fallbacks. */
+#define NETIF_F_GSO_SOFTWARE	(NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6)
+
+
+#define NETIF_F_GEN_CSUM	(NETIF_F_NO_CSUM | NETIF_F_HW_CSUM)
+#define NETIF_F_V4_CSUM		(NETIF_F_GEN_CSUM | NETIF_F_IP_CSUM)
+#define NETIF_F_V6_CSUM		(NETIF_F_GEN_CSUM | NETIF_F_IPV6_CSUM)
+#define NETIF_F_ALL_CSUM	(NETIF_F_V4_CSUM | NETIF_F_V6_CSUM)
+
+	/*
+	 * If one device supports one of these features, then enable them
+	 * for all in netdev_increment_features.
+	 */
+#define NETIF_F_ONE_FOR_ALL	(NETIF_F_GSO_SOFTWARE | NETIF_F_GSO_ROBUST | \
+				 NETIF_F_SG | NETIF_F_HIGHDMA |		\
+				 NETIF_F_FRAGLIST)
+
+	/* Interface index. Unique device identifier	*/
+	int			ifindex;
+	int			iflink;
+
+	struct net_device_stats	stats;
+
+#ifdef CONFIG_WIRELESS_EXT
+	/* List of functions to handle Wireless Extensions (instead of ioctl).
+	 * See <net/iw_handler.h> for details. Jean II */
+	const struct iw_handler_def *	wireless_handlers;
+	/* Instance data managed by the core of Wireless Extensions. */
+	struct iw_public_data *	wireless_data;
+#endif
+	/* Management operations */
+	const struct net_device_ops *netdev_ops;
+	const struct ethtool_ops *ethtool_ops;
+
+	/* Hardware header description */
+	const struct header_ops *header_ops;
+
+	unsigned int		flags;	/* interface flags (a la BSD)	*/
+	unsigned short		gflags;
+        unsigned short          priv_flags; /* Like 'flags' but invisible to userspace. */
+	unsigned short		padded;	/* How much padding added by alloc_netdev() */
+
+	unsigned char		operstate; /* RFC2863 operstate */
+	unsigned char		link_mode; /* mapping policy to operstate */
+
+	unsigned int		mtu;	/* interface MTU value		*/
+	unsigned short		type;	/* interface hardware type	*/
+	unsigned short		hard_header_len;	/* hardware hdr length	*/
+
+	/* extra head- and tailroom the hardware may need, but not in all cases
+	 * can this be guaranteed, especially tailroom. Some cases also use
+	 * LL_MAX_HEADER instead to allocate the skb.
+	 */
+	unsigned short		needed_headroom;
+	unsigned short		needed_tailroom;
+
+	struct net_device	*master; /* Pointer to master device of a group,
+					  * which this device is member of.
+					  */
+
+	/* Interface address info. */
+	unsigned char		perm_addr[MAX_ADDR_LEN]; /* permanent hw address */
+	unsigned char		addr_len;	/* hardware address length	*/
+	unsigned short          dev_id;		/* for shared network cards */
+
+	spinlock_t		addr_list_lock;
+	struct netdev_hw_addr_list	uc;	/* Unicast mac addresses */
+	struct netdev_hw_addr_list	mc;	/* Multicast mac addresses */
+	int			uc_promisc;
+	unsigned int		promiscuity;
+	unsigned int		allmulti;
+
+
+	/* Protocol specific pointers */
+	
+#ifdef CONFIG_NET_DSA
+	void			*dsa_ptr;	/* dsa specific data */
+#endif
+	void 			*atalk_ptr;	/* AppleTalk link 	*/
+	void			*ip_ptr;	/* IPv4 specific data	*/
+	void                    *dn_ptr;        /* DECnet specific data */
+	void                    *ip6_ptr;       /* IPv6 specific data */
+	void			*ec_ptr;	/* Econet specific data	*/
+	void			*ax25_ptr;	/* AX.25 specific data */
+	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
+						   assign before registering */
+
+/*
+ * Cache line mostly used on receive path (including eth_type_trans())
+ */
+	unsigned long		last_rx;	/* Time of last Rx	*/
+	/* Interface address info used in eth_type_trans() */
+	unsigned char		*dev_addr;	/* hw address, (before bcast
+						   because most packets are
+						   unicast) */
+
+	struct netdev_hw_addr_list	dev_addrs; /* list of device
+						      hw addresses */
+
+	unsigned char		broadcast[MAX_ADDR_LEN];	/* hw bcast add	*/
+
+#ifdef CONFIG_RPS
+	struct kset		*queues_kset;
+
+	struct netdev_rx_queue	*_rx;
+
+	/* Number of RX queues allocated at alloc_netdev_mq() time  */
+	unsigned int		num_rx_queues;
+#endif
+
+	struct netdev_queue	rx_queue;
+
+	struct netdev_queue	*_tx ____cacheline_aligned_in_smp;
+
+	/* Number of TX queues allocated at alloc_netdev_mq() time  */
+	unsigned int		num_tx_queues;
+
+	/* Number of TX queues currently active in device  */
+	unsigned int		real_num_tx_queues;
+
+	/* root qdisc from userspace point of view */
+	struct Qdisc		*qdisc;
+
+	unsigned long		tx_queue_len;	/* Max frames per queue allowed */
+	spinlock_t		tx_global_lock;
+/*
+ * One part is mostly used on xmit path (device)
+ */
+	/* These may be needed for future network-power-down code. */
+
+	/*
+	 * trans_start here is expensive for high speed devices on SMP,
+	 * please use netdev_queue->trans_start instead.
+	 */
+	unsigned long		trans_start;	/* Time (in jiffies) of last Tx	*/
+
+	int			watchdog_timeo; /* used by dev_watchdog() */
+	struct timer_list	watchdog_timer;
+
+	/* Number of references to this device */
+	atomic_t		refcnt ____cacheline_aligned_in_smp;
+
+	/* delayed register/unregister */
+	struct list_head	todo_list;
+	/* device index hash chain */
+	struct hlist_node	index_hlist;
+
+	struct list_head	link_watch_list;
+
+	/* register/unregister state machine */
+	enum { NETREG_UNINITIALIZED=0,
+	       NETREG_REGISTERED,	/* completed register_netdevice */
+	       NETREG_UNREGISTERING,	/* called unregister_netdevice */
+	       NETREG_UNREGISTERED,	/* completed unregister todo */
+	       NETREG_RELEASED,		/* called free_netdev */
+	       NETREG_DUMMY,		/* dummy device for NAPI poll */
+	} reg_state:16;
+
+	enum {
+		RTNL_LINK_INITIALIZED,
+		RTNL_LINK_INITIALIZING,
+	} rtnl_link_state:16;
+
+	/* Called from unregister, can be used to call free_netdev */
+	void (*destructor)(struct net_device *dev);
+
+#ifdef CONFIG_NETPOLL
+	struct netpoll_info	*npinfo;
+#endif
+
+#ifdef CONFIG_NET_NS
+	/* Network namespace this network device is inside */
+	struct net		*nd_net;
+#endif
+
+	/* mid-layer private */
+	void			*ml_priv;
+
+	/* bridge stuff */
+	struct net_bridge_port	*br_port;
+	/* macvlan */
+	struct macvlan_port	*macvlan_port;
+	/* GARP */
+	struct garp_port	*garp_port;
+
+	/* class/net/name entry */
+	struct device		dev;
+	/* space for optional device, statistics, and wireless sysfs groups */
+	const struct attribute_group *sysfs_groups[4];
+
+	/* rtnetlink link ops */
+	const struct rtnl_link_ops *rtnl_link_ops;
+
+	/* VLAN feature mask */
+	unsigned long vlan_features;
+
+	/* for setting kernel sock attribute on TCP connection setup */
+#define GSO_MAX_SIZE		65536
+	unsigned int		gso_max_size;
+
+#ifdef CONFIG_DCB
+	/* Data Center Bridging netlink ops */
+	const struct dcbnl_rtnl_ops *dcbnl_ops;
+#endif
+
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+	/* max exchange id for FCoE LRO by ddp */
+	unsigned int		fcoe_ddp_xid;
+#endif
+	/* n-tuple filter list attached to this device */
+	struct ethtool_rx_ntuple_list ethtool_ntuple_list;
+};
+#define to_net_dev(d) container_of(d, struct net_device, dev)
+
+#define	NETDEV_ALIGN		32
+
+static inline
+struct netdev_queue *netdev_get_tx_queue(const struct net_device *dev,
+					 unsigned int index)
+{
+	return &dev->_tx[index];
+}
+
+static inline void netdev_for_each_tx_queue(struct net_device *dev,
+					    void (*f)(struct net_device *,
+						      struct netdev_queue *,
+						      void *),
+					    void *arg)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++)
+		f(dev, &dev->_tx[i], arg);
+}
+
+/*
+ * Net namespace inlines
+ */
+static inline
+struct net *dev_net(const struct net_device *dev)
+{
+#ifdef CONFIG_NET_NS
+	return dev->nd_net;
+#else
+	return &init_net;
+#endif
+}
+
+static inline
+void dev_net_set(struct net_device *dev, struct net *net)
+{
+#ifdef CONFIG_NET_NS
+	release_net(dev->nd_net);
+	dev->nd_net = hold_net(net);
+#endif
+}
+
+static inline bool netdev_uses_dsa_tags(struct net_device *dev)
+{
+#ifdef CONFIG_NET_DSA_TAG_DSA
+	if (dev->dsa_ptr != NULL)
+		return dsa_uses_dsa_tags(dev->dsa_ptr);
+#endif
+
+	return 0;
+}
+
+#ifndef CONFIG_NET_NS
+static inline void skb_set_dev(struct sk_buff *skb, struct net_device *dev)
+{
+	skb->dev = dev;
+}
+#else /* CONFIG_NET_NS */
+void skb_set_dev(struct sk_buff *skb, struct net_device *dev);
+#endif
+
+static inline bool netdev_uses_trailer_tags(struct net_device *dev)
+{
+#ifdef CONFIG_NET_DSA_TAG_TRAILER
+	if (dev->dsa_ptr != NULL)
+		return dsa_uses_trailer_tags(dev->dsa_ptr);
+#endif
+
+	return 0;
+}
+
+/**
+ *	netdev_priv - access network device private data
+ *	@dev: network device
+ *
+ * Get network device private data
+ */
+static inline void *netdev_priv(const struct net_device *dev)
+{
+	return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
+}
+
+/* Set the sysfs physical device reference for the network logical device
+ * if set prior to registration will cause a symlink during initialization.
+ */
+#define SET_NETDEV_DEV(net, pdev)	((net)->dev.parent = (pdev))
+
+/* Set the sysfs device type for the network logical device to allow
+ * fin grained indentification of different network device types. For
+ * example Ethernet, Wirelss LAN, Bluetooth, WiMAX etc.
+ */
+#define SET_NETDEV_DEVTYPE(net, devtype)	((net)->dev.type = (devtype))
+
+/**
+ *	netif_napi_add - initialize a napi context
+ *	@dev:  network device
+ *	@napi: napi context
+ *	@poll: polling function
+ *	@weight: default weight
+ *
+ * netif_napi_add() must be used to initialize a napi context prior to calling
+ * *any* of the other napi related functions.
+ */
+void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
+		    int (*poll)(struct napi_struct *, int), int weight);
+
+/**
+ *  netif_napi_del - remove a napi context
+ *  @napi: napi context
+ *
+ *  netif_napi_del() removes a napi context from the network device napi list
+ */
+void netif_napi_del(struct napi_struct *napi);
+
+struct napi_gro_cb {
+	/* Virtual address of skb_shinfo(skb)->frags[0].page + offset. */
+	void *frag0;
+
+	/* Length of frag0. */
+	unsigned int frag0_len;
+
+	/* This indicates where we are processing relative to skb->data. */
+	int data_offset;
+
+	/* This is non-zero if the packet may be of the same flow. */
+	int same_flow;
+
+	/* This is non-zero if the packet cannot be merged with the new skb. */
+	int flush;
+
+	/* Number of segments aggregated. */
+	int count;
+
+	/* Free the skb? */
+	int free;
+};
+
+#define NAPI_GRO_CB(skb) ((struct napi_gro_cb *)(skb)->cb)
+
+struct packet_type {
+	__be16			type;	/* This is really htons(ether_type). */
+	struct net_device	*dev;	/* NULL is wildcarded here	     */
+	int			(*func) (struct sk_buff *,
+					 struct net_device *,
+					 struct packet_type *,
+					 struct net_device *);
+	struct sk_buff		*(*gso_segment)(struct sk_buff *skb,
+						int features);
+	int			(*gso_send_check)(struct sk_buff *skb);
+	struct sk_buff		**(*gro_receive)(struct sk_buff **head,
+					       struct sk_buff *skb);
+	int			(*gro_complete)(struct sk_buff *skb);
+	void			*af_packet_priv;
+	struct list_head	list;
+};
+
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+
+extern rwlock_t				dev_base_lock;		/* Device list lock */
+
+
+#define for_each_netdev(net, d)		\
+		list_for_each_entry(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_reverse(net, d)	\
+		list_for_each_entry_reverse(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_rcu(net, d)		\
+		list_for_each_entry_rcu(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_safe(net, d, n)	\
+		list_for_each_entry_safe(d, n, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_continue(net, d)		\
+		list_for_each_entry_continue(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_continue_rcu(net, d)		\
+	list_for_each_entry_continue_rcu(d, &(net)->dev_base_head, dev_list)
+#define net_device_entry(lh)	list_entry(lh, struct net_device, dev_list)
+
+static inline struct net_device *next_net_device(struct net_device *dev)
+{
+	struct list_head *lh;
+	struct net *net;
+
+	net = dev_net(dev);
+	lh = dev->dev_list.next;
+	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
+}
+
+static inline struct net_device *next_net_device_rcu(struct net_device *dev)
+{
+	struct list_head *lh;
+	struct net *net;
+
+	net = dev_net(dev);
+	lh = rcu_dereference(dev->dev_list.next);
+	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
+}
+
+static inline struct net_device *first_net_device(struct net *net)
+{
+	return list_empty(&net->dev_base_head) ? NULL :
+		net_device_entry(net->dev_base_head.next);
+}
+
+extern int 			netdev_boot_setup_check(struct net_device *dev);
+extern unsigned long		netdev_boot_base(const char *prefix, int unit);
+extern struct net_device    *dev_getbyhwaddr(struct net *net, unsigned short type, char *hwaddr);
+extern struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type);
+extern struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short type);
+extern void		dev_add_pack(struct packet_type *pt);
+extern void		dev_remove_pack(struct packet_type *pt);
+extern void		__dev_remove_pack(struct packet_type *pt);
+
+extern struct net_device	*dev_get_by_flags(struct net *net, unsigned short flags,
+						  unsigned short mask);
+extern struct net_device	*dev_get_by_name(struct net *net, const char *name);
+extern struct net_device	*dev_get_by_name_rcu(struct net *net, const char *name);
+extern struct net_device	*__dev_get_by_name(struct net *net, const char *name);
+extern int		dev_alloc_name(struct net_device *dev, const char *name);
+extern int		dev_open(struct net_device *dev);
+extern int		dev_close(struct net_device *dev);
+extern void		dev_disable_lro(struct net_device *dev);
+extern int		dev_queue_xmit(struct sk_buff *skb);
+extern int		register_netdevice(struct net_device *dev);
+extern void		unregister_netdevice_queue(struct net_device *dev,
+						   struct list_head *head);
+extern void		unregister_netdevice_many(struct list_head *head);
+static inline void unregister_netdevice(struct net_device *dev)
+{
+	unregister_netdevice_queue(dev, NULL);
+}
+
+extern void		free_netdev(struct net_device *dev);
+extern void		synchronize_net(void);
+extern int 		register_netdevice_notifier(struct notifier_block *nb);
+extern int		unregister_netdevice_notifier(struct notifier_block *nb);
+extern int		init_dummy_netdev(struct net_device *dev);
+extern void		netdev_resync_ops(struct net_device *dev);
+
+extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
+extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
+extern struct net_device	*__dev_get_by_index(struct net *net, int ifindex);
+extern struct net_device	*dev_get_by_index_rcu(struct net *net, int ifindex);
+extern int		dev_restart(struct net_device *dev);
+#ifdef CONFIG_NETPOLL_TRAP
+extern int		netpoll_trap(void);
+#endif
+extern int	       skb_gro_receive(struct sk_buff **head,
+				       struct sk_buff *skb);
+extern void	       skb_gro_reset_offset(struct sk_buff *skb);
+
+static inline unsigned int skb_gro_offset(const struct sk_buff *skb)
+{
+	return NAPI_GRO_CB(skb)->data_offset;
+}
+
+static inline unsigned int skb_gro_len(const struct sk_buff *skb)
+{
+	return skb->len - NAPI_GRO_CB(skb)->data_offset;
+}
+
+static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len)
+{
+	NAPI_GRO_CB(skb)->data_offset += len;
+}
+
+static inline void *skb_gro_header_fast(struct sk_buff *skb,
+					unsigned int offset)
+{
+	return NAPI_GRO_CB(skb)->frag0 + offset;
+}
+
+static inline int skb_gro_header_hard(struct sk_buff *skb, unsigned int hlen)
+{
+	return NAPI_GRO_CB(skb)->frag0_len < hlen;
+}
+
+static inline void *skb_gro_header_slow(struct sk_buff *skb, unsigned int hlen,
+					unsigned int offset)
+{
+	NAPI_GRO_CB(skb)->frag0 = NULL;
+	NAPI_GRO_CB(skb)->frag0_len = 0;
+	return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL;
+}
+
+static inline void *skb_gro_mac_header(struct sk_buff *skb)
+{
+	return NAPI_GRO_CB(skb)->frag0 ?: skb_mac_header(skb);
+}
+
+static inline void *skb_gro_network_header(struct sk_buff *skb)
+{
+	return (NAPI_GRO_CB(skb)->frag0 ?: skb->data) +
+	       skb_network_offset(skb);
+}
+
+static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev,
+				  unsigned short type,
+				  const void *daddr, const void *saddr,
+				  unsigned len)
+{
+	if (!dev->header_ops || !dev->header_ops->create)
+		return 0;
+
+	return dev->header_ops->create(skb, dev, type, daddr, saddr, len);
+}
+
+static inline int dev_parse_header(const struct sk_buff *skb,
+				   unsigned char *haddr)
+{
+	const struct net_device *dev = skb->dev;
+
+	if (!dev->header_ops || !dev->header_ops->parse)
+		return 0;
+	return dev->header_ops->parse(skb, haddr);
+}
+
+typedef int gifconf_func_t(struct net_device * dev, char __user * bufptr, int len);
+extern int		register_gifconf(unsigned int family, gifconf_func_t * gifconf);
+static inline int unregister_gifconf(unsigned int family)
+{
+	return register_gifconf(family, NULL);
+}
+
+/*
+ * Incoming packets are placed on per-cpu queues
+ */
+struct softnet_data {
+	struct Qdisc		*output_queue;
+	struct Qdisc		**output_queue_tailp;
+	struct list_head	poll_list;
+	struct sk_buff		*completion_queue;
+	struct sk_buff_head	process_queue;
+
+	/* stats */
+	unsigned int		processed;
+	unsigned int		time_squeeze;
+	unsigned int		cpu_collision;
+	unsigned int		received_rps;
+
+#ifdef CONFIG_RPS
+	struct softnet_data	*rps_ipi_list;
+
+	/* Elements below can be accessed between CPUs for RPS */
+	struct call_single_data	csd ____cacheline_aligned_in_smp;
+	struct softnet_data	*rps_ipi_next;
+	unsigned int		cpu;
+	unsigned int		input_queue_head;
+	unsigned int		input_queue_tail;
+#endif
+	unsigned		dropped;
+	struct sk_buff_head	input_pkt_queue;
+	struct napi_struct	backlog;
+};
+
+static inline void input_queue_head_incr(struct softnet_data *sd)
+{
+#ifdef CONFIG_RPS
+	sd->input_queue_head++;
+#endif
+}
+
+static inline void input_queue_tail_incr_save(struct softnet_data *sd,
+					      unsigned int *qtail)
+{
+#ifdef CONFIG_RPS
+	*qtail = ++sd->input_queue_tail;
+#endif
+}
+
+DECLARE_PER_CPU_ALIGNED(struct softnet_data, softnet_data);
+
+#define HAVE_NETIF_QUEUE
+
+extern void __netif_schedule(struct Qdisc *q);
+
+static inline void netif_schedule_queue(struct netdev_queue *txq)
+{
+	if (!test_bit(__QUEUE_STATE_XOFF, &txq->state))
+		__netif_schedule(txq->qdisc);
+}
+
+static inline void netif_tx_schedule_all(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++)
+		netif_schedule_queue(netdev_get_tx_queue(dev, i));
+}
+
+static inline void netif_tx_start_queue(struct netdev_queue *dev_queue)
+{
+	clear_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
+}
+
+/**
+ *	netif_start_queue - allow transmit
+ *	@dev: network device
+ *
+ *	Allow upper layers to call the device hard_start_xmit routine.
+ */
+static inline void netif_start_queue(struct net_device *dev)
+{
+	netif_tx_start_queue(netdev_get_tx_queue(dev, 0));
+}
+
+static inline void netif_tx_start_all_queues(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		netif_tx_start_queue(txq);
+	}
+}
+
+static inline void netif_tx_wake_queue(struct netdev_queue *dev_queue)
+{
+#ifdef CONFIG_NETPOLL_TRAP
+	if (netpoll_trap()) {
+		netif_tx_start_queue(dev_queue);
+		return;
+	}
+#endif
+	if (test_and_clear_bit(__QUEUE_STATE_XOFF, &dev_queue->state))
+		__netif_schedule(dev_queue->qdisc);
+}
+
+/**
+ *	netif_wake_queue - restart transmit
+ *	@dev: network device
+ *
+ *	Allow upper layers to call the device hard_start_xmit routine.
+ *	Used for flow control when transmit resources are available.
+ */
+static inline void netif_wake_queue(struct net_device *dev)
+{
+	netif_tx_wake_queue(netdev_get_tx_queue(dev, 0));
+}
+
+static inline void netif_tx_wake_all_queues(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		netif_tx_wake_queue(txq);
+	}
+}
+
+static inline void netif_tx_stop_queue(struct netdev_queue *dev_queue)
+{
+	set_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
+}
+
+/**
+ *	netif_stop_queue - stop transmitted packets
+ *	@dev: network device
+ *
+ *	Stop upper layers calling the device hard_start_xmit routine.
+ *	Used for flow control when transmit resources are unavailable.
+ */
+static inline void netif_stop_queue(struct net_device *dev)
+{
+	netif_tx_stop_queue(netdev_get_tx_queue(dev, 0));
+}
+
+static inline void netif_tx_stop_all_queues(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+		netif_tx_stop_queue(txq);
+	}
+}
+
+static inline int netif_tx_queue_stopped(const struct netdev_queue *dev_queue)
+{
+	return test_bit(__QUEUE_STATE_XOFF, &dev_queue->state);
+}
+
+/**
+ *	netif_queue_stopped - test if transmit queue is flowblocked
+ *	@dev: network device
+ *
+ *	Test if transmit queue on device is currently unable to send.
+ */
+static inline int netif_queue_stopped(const struct net_device *dev)
+{
+	return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0));
+}
+
+static inline int netif_tx_queue_frozen(const struct netdev_queue *dev_queue)
+{
+	return test_bit(__QUEUE_STATE_FROZEN, &dev_queue->state);
+}
+
+/**
+ *	netif_running - test if up
+ *	@dev: network device
+ *
+ *	Test if the device has been brought up.
+ */
+static inline int netif_running(const struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_START, &dev->state);
+}
+
+/*
+ * Routines to manage the subqueues on a device.  We only need start
+ * stop, and a check if it's stopped.  All other device management is
+ * done at the overall netdevice level.
+ * Also test the device if we're multiqueue.
+ */
+
+/**
+ *	netif_start_subqueue - allow sending packets on subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Start individual transmit queue of a device with multiple transmit queues.
+ */
+static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
+{
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
+
+	netif_tx_start_queue(txq);
+}
+
+/**
+ *	netif_stop_subqueue - stop sending packets on subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Stop individual transmit queue of a device with multiple transmit queues.
+ */
+static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
+{
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
+#ifdef CONFIG_NETPOLL_TRAP
+	if (netpoll_trap())
+		return;
+#endif
+	netif_tx_stop_queue(txq);
+}
+
+/**
+ *	netif_subqueue_stopped - test status of subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Check individual transmit queue of a device with multiple transmit queues.
+ */
+static inline int __netif_subqueue_stopped(const struct net_device *dev,
+					 u16 queue_index)
+{
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
+
+	return netif_tx_queue_stopped(txq);
+}
+
+static inline int netif_subqueue_stopped(const struct net_device *dev,
+					 struct sk_buff *skb)
+{
+	return __netif_subqueue_stopped(dev, skb_get_queue_mapping(skb));
+}
+
+/**
+ *	netif_wake_subqueue - allow sending packets on subqueue
+ *	@dev: network device
+ *	@queue_index: sub queue index
+ *
+ * Resume individual transmit queue of a device with multiple transmit queues.
+ */
+static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
+{
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
+#ifdef CONFIG_NETPOLL_TRAP
+	if (netpoll_trap())
+		return;
+#endif
+	if (test_and_clear_bit(__QUEUE_STATE_XOFF, &txq->state))
+		__netif_schedule(txq->qdisc);
+}
+
+/**
+ *	netif_is_multiqueue - test if device has multiple transmit queues
+ *	@dev: network device
+ *
+ * Check if device has multiple transmit queues
+ */
+static inline int netif_is_multiqueue(const struct net_device *dev)
+{
+	return (dev->num_tx_queues > 1);
+}
+
+extern void netif_set_real_num_tx_queues(struct net_device *dev,
+					 unsigned int txq);
+
+/* Use this variant when it is known for sure that it
+ * is executing from hardware interrupt context or with hardware interrupts
+ * disabled.
+ */
+extern void dev_kfree_skb_irq(struct sk_buff *skb);
+
+/* Use this variant in places where it could be invoked
+ * from either hardware interrupt or other context, with hardware interrupts
+ * either disabled or enabled.
+ */
+extern void dev_kfree_skb_any(struct sk_buff *skb);
+
+#define HAVE_NETIF_RX 1
+extern int		netif_rx(struct sk_buff *skb);
+extern int		netif_rx_ni(struct sk_buff *skb);
+#define HAVE_NETIF_RECEIVE_SKB 1
+extern int		netif_receive_skb(struct sk_buff *skb);
+extern gro_result_t	dev_gro_receive(struct napi_struct *napi,
+					struct sk_buff *skb);
+extern gro_result_t	napi_skb_finish(gro_result_t ret, struct sk_buff *skb);
+extern gro_result_t	napi_gro_receive(struct napi_struct *napi,
+					 struct sk_buff *skb);
+extern void		napi_reuse_skb(struct napi_struct *napi,
+				       struct sk_buff *skb);
+extern struct sk_buff *	napi_get_frags(struct napi_struct *napi);
+extern gro_result_t	napi_frags_finish(struct napi_struct *napi,
+					  struct sk_buff *skb,
+					  gro_result_t ret);
+extern struct sk_buff *	napi_frags_skb(struct napi_struct *napi);
+extern gro_result_t	napi_gro_frags(struct napi_struct *napi);
+
+static inline void napi_free_frags(struct napi_struct *napi)
+{
+	kfree_skb(napi->skb);
+	napi->skb = NULL;
+}
+
+extern void		netif_nit_deliver(struct sk_buff *skb);
+extern int		dev_valid_name(const char *name);
+extern int		dev_ioctl(struct net *net, unsigned int cmd, void __user *);
+extern int		dev_ethtool(struct net *net, struct ifreq *);
+extern unsigned		dev_get_flags(const struct net_device *);
+extern int		__dev_change_flags(struct net_device *, unsigned int flags);
+extern int		dev_change_flags(struct net_device *, unsigned);
+extern void		__dev_notify_flags(struct net_device *, unsigned int old_flags);
+extern int		dev_change_name(struct net_device *, const char *);
+extern int		dev_set_alias(struct net_device *, const char *, size_t);
+extern int		dev_change_net_namespace(struct net_device *,
+						 struct net *, const char *);
+extern int		dev_set_mtu(struct net_device *, int);
+extern int		dev_set_mac_address(struct net_device *,
+					    struct sockaddr *);
+extern int		dev_hard_start_xmit(struct sk_buff *skb,
+					    struct net_device *dev,
+					    struct netdev_queue *txq);
+extern int		dev_forward_skb(struct net_device *dev,
+					struct sk_buff *skb);
+
+extern int		netdev_budget;
+
+/* Called by rtnetlink.c:rtnl_unlock() */
+extern void netdev_run_todo(void);
+
+/**
+ *	dev_put - release reference to device
+ *	@dev: network device
+ *
+ * Release reference to device to allow it to be freed.
+ */
+static inline void dev_put(struct net_device *dev)
+{
+	atomic_dec(&dev->refcnt);
+}
+
+/**
+ *	dev_hold - get reference to device
+ *	@dev: network device
+ *
+ * Hold reference to device to keep it from being freed.
+ */
+static inline void dev_hold(struct net_device *dev)
+{
+	atomic_inc(&dev->refcnt);
+}
+
+/* Carrier loss detection, dial on demand. The functions netif_carrier_on
+ * and _off may be called from IRQ context, but it is caller
+ * who is responsible for serialization of these calls.
+ *
+ * The name carrier is inappropriate, these functions should really be
+ * called netif_lowerlayer_*() because they represent the state of any
+ * kind of lower layer not just hardware media.
+ */
+
+extern void linkwatch_fire_event(struct net_device *dev);
+extern void linkwatch_forget_dev(struct net_device *dev);
+
+/**
+ *	netif_carrier_ok - test if carrier present
+ *	@dev: network device
+ *
+ * Check if carrier is present on device
+ */
+static inline int netif_carrier_ok(const struct net_device *dev)
+{
+	return !test_bit(__LINK_STATE_NOCARRIER, &dev->state);
+}
+
+extern unsigned long dev_trans_start(struct net_device *dev);
+
+extern void __netdev_watchdog_up(struct net_device *dev);
+
+extern void netif_carrier_on(struct net_device *dev);
+
+extern void netif_carrier_off(struct net_device *dev);
+
+extern void netif_notify_peers(struct net_device *dev);
+
+/**
+ *	netif_dormant_on - mark device as dormant.
+ *	@dev: network device
+ *
+ * Mark device as dormant (as per RFC2863).
+ *
+ * The dormant state indicates that the relevant interface is not
+ * actually in a condition to pass packets (i.e., it is not 'up') but is
+ * in a "pending" state, waiting for some external event.  For "on-
+ * demand" interfaces, this new state identifies the situation where the
+ * interface is waiting for events to place it in the up state.
+ *
+ */
+static inline void netif_dormant_on(struct net_device *dev)
+{
+	if (!test_and_set_bit(__LINK_STATE_DORMANT, &dev->state))
+		linkwatch_fire_event(dev);
+}
+
+/**
+ *	netif_dormant_off - set device as not dormant.
+ *	@dev: network device
+ *
+ * Device is not in dormant state.
+ */
+static inline void netif_dormant_off(struct net_device *dev)
+{
+	if (test_and_clear_bit(__LINK_STATE_DORMANT, &dev->state))
+		linkwatch_fire_event(dev);
+}
+
+/**
+ *	netif_dormant - test if carrier present
+ *	@dev: network device
+ *
+ * Check if carrier is present on device
+ */
+static inline int netif_dormant(const struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_DORMANT, &dev->state);
+}
+
+
+/**
+ *	netif_oper_up - test if device is operational
+ *	@dev: network device
+ *
+ * Check if carrier is operational
+ */
+static inline int netif_oper_up(const struct net_device *dev)
+{
+	return (dev->operstate == IF_OPER_UP ||
+		dev->operstate == IF_OPER_UNKNOWN /* backward compat */);
+}
+
+/**
+ *	netif_device_present - is device available or removed
+ *	@dev: network device
+ *
+ * Check if device has not been removed from system.
+ */
+static inline int netif_device_present(struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_PRESENT, &dev->state);
+}
+
+extern void netif_device_detach(struct net_device *dev);
+
+extern void netif_device_attach(struct net_device *dev);
+
+/*
+ * Network interface message level settings
+ */
+#define HAVE_NETIF_MSG 1
+
+enum {
+	NETIF_MSG_DRV		= 0x0001,
+	NETIF_MSG_PROBE		= 0x0002,
+	NETIF_MSG_LINK		= 0x0004,
+	NETIF_MSG_TIMER		= 0x0008,
+	NETIF_MSG_IFDOWN	= 0x0010,
+	NETIF_MSG_IFUP		= 0x0020,
+	NETIF_MSG_RX_ERR	= 0x0040,
+	NETIF_MSG_TX_ERR	= 0x0080,
+	NETIF_MSG_TX_QUEUED	= 0x0100,
+	NETIF_MSG_INTR		= 0x0200,
+	NETIF_MSG_TX_DONE	= 0x0400,
+	NETIF_MSG_RX_STATUS	= 0x0800,
+	NETIF_MSG_PKTDATA	= 0x1000,
+	NETIF_MSG_HW		= 0x2000,
+	NETIF_MSG_WOL		= 0x4000,
+};
+
+#define netif_msg_drv(p)	((p)->msg_enable & NETIF_MSG_DRV)
+#define netif_msg_probe(p)	((p)->msg_enable & NETIF_MSG_PROBE)
+#define netif_msg_link(p)	((p)->msg_enable & NETIF_MSG_LINK)
+#define netif_msg_timer(p)	((p)->msg_enable & NETIF_MSG_TIMER)
+#define netif_msg_ifdown(p)	((p)->msg_enable & NETIF_MSG_IFDOWN)
+#define netif_msg_ifup(p)	((p)->msg_enable & NETIF_MSG_IFUP)
+#define netif_msg_rx_err(p)	((p)->msg_enable & NETIF_MSG_RX_ERR)
+#define netif_msg_tx_err(p)	((p)->msg_enable & NETIF_MSG_TX_ERR)
+#define netif_msg_tx_queued(p)	((p)->msg_enable & NETIF_MSG_TX_QUEUED)
+#define netif_msg_intr(p)	((p)->msg_enable & NETIF_MSG_INTR)
+#define netif_msg_tx_done(p)	((p)->msg_enable & NETIF_MSG_TX_DONE)
+#define netif_msg_rx_status(p)	((p)->msg_enable & NETIF_MSG_RX_STATUS)
+#define netif_msg_pktdata(p)	((p)->msg_enable & NETIF_MSG_PKTDATA)
+#define netif_msg_hw(p)		((p)->msg_enable & NETIF_MSG_HW)
+#define netif_msg_wol(p)	((p)->msg_enable & NETIF_MSG_WOL)
+
+static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits)
+{
+	/* use default */
+	if (debug_value < 0 || debug_value >= (sizeof(u32) * 8))
+		return default_msg_enable_bits;
+	if (debug_value == 0)	/* no output */
+		return 0;
+	/* set low N bits */
+	return (1 << debug_value) - 1;
+}
+
+static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
+{
+	spin_lock(&txq->_xmit_lock);
+	txq->xmit_lock_owner = cpu;
+}
+
+static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
+{
+	spin_lock_bh(&txq->_xmit_lock);
+	txq->xmit_lock_owner = smp_processor_id();
+}
+
+static inline int __netif_tx_trylock(struct netdev_queue *txq)
+{
+	int ok = spin_trylock(&txq->_xmit_lock);
+	if (likely(ok))
+		txq->xmit_lock_owner = smp_processor_id();
+	return ok;
+}
+
+static inline void __netif_tx_unlock(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+	spin_unlock(&txq->_xmit_lock);
+}
+
+static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
+{
+	txq->xmit_lock_owner = -1;
+	spin_unlock_bh(&txq->_xmit_lock);
+}
+
+static inline void txq_trans_update(struct netdev_queue *txq)
+{
+	if (txq->xmit_lock_owner != -1)
+		txq->trans_start = jiffies;
+}
+
+/**
+ *	netif_tx_lock - grab network device transmit lock
+ *	@dev: network device
+ *
+ * Get network device transmit lock
+ */
+static inline void netif_tx_lock(struct net_device *dev)
+{
+	unsigned int i;
+	int cpu;
+
+	spin_lock(&dev->tx_global_lock);
+	cpu = smp_processor_id();
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		/* We are the only thread of execution doing a
+		 * freeze, but we have to grab the _xmit_lock in
+		 * order to synchronize with threads which are in
+		 * the ->hard_start_xmit() handler and already
+		 * checked the frozen bit.
+		 */
+		__netif_tx_lock(txq, cpu);
+		set_bit(__QUEUE_STATE_FROZEN, &txq->state);
+		__netif_tx_unlock(txq);
+	}
+}
+
+static inline void netif_tx_lock_bh(struct net_device *dev)
+{
+	local_bh_disable();
+	netif_tx_lock(dev);
+}
+
+static inline void netif_tx_unlock(struct net_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		/* No need to grab the _xmit_lock here.  If the
+		 * queue is not stopped for another reason, we
+		 * force a schedule.
+		 */
+		clear_bit(__QUEUE_STATE_FROZEN, &txq->state);
+		netif_schedule_queue(txq);
+	}
+	spin_unlock(&dev->tx_global_lock);
+}
+
+static inline void netif_tx_unlock_bh(struct net_device *dev)
+{
+	netif_tx_unlock(dev);
+	local_bh_enable();
+}
+
+#define HARD_TX_LOCK(dev, txq, cpu) {			\
+	if ((dev->features & NETIF_F_LLTX) == 0) {	\
+		__netif_tx_lock(txq, cpu);		\
+	}						\
+}
+
+#define HARD_TX_UNLOCK(dev, txq) {			\
+	if ((dev->features & NETIF_F_LLTX) == 0) {	\
+		__netif_tx_unlock(txq);			\
+	}						\
+}
+
+static inline void netif_tx_disable(struct net_device *dev)
+{
+	unsigned int i;
+	int cpu;
+
+	local_bh_disable();
+	cpu = smp_processor_id();
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
+
+		__netif_tx_lock(txq, cpu);
+		netif_tx_stop_queue(txq);
+		__netif_tx_unlock(txq);
+	}
+	local_bh_enable();
+}
+
+static inline void netif_addr_lock(struct net_device *dev)
+{
+	spin_lock(&dev->addr_list_lock);
+}
+
+static inline void netif_addr_lock_bh(struct net_device *dev)
+{
+	spin_lock_bh(&dev->addr_list_lock);
+}
+
+static inline void netif_addr_unlock(struct net_device *dev)
+{
+	spin_unlock(&dev->addr_list_lock);
+}
+
+static inline void netif_addr_unlock_bh(struct net_device *dev)
+{
+	spin_unlock_bh(&dev->addr_list_lock);
+}
+
+/*
+ * dev_addrs walker. Should be used only for read access. Call with
+ * rcu_read_lock held.
+ */
+#define for_each_dev_addr(dev, ha) \
+		list_for_each_entry_rcu(ha, &dev->dev_addrs.list, list)
+
+/* These functions live elsewhere (drivers/net/net_init.c, but related) */
+
+extern void		ether_setup(struct net_device *dev);
+
+/* Support for loadable net-drivers */
+extern struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
+				       void (*setup)(struct net_device *),
+				       unsigned int queue_count);
+#define alloc_netdev(sizeof_priv, name, setup) \
+	alloc_netdev_mq(sizeof_priv, name, setup, 1)
+extern int		register_netdev(struct net_device *dev);
+extern void		unregister_netdev(struct net_device *dev);
+
+/* General hardware address lists handling functions */
+extern int __hw_addr_add_multiple(struct netdev_hw_addr_list *to_list,
+				  struct netdev_hw_addr_list *from_list,
+				  int addr_len, unsigned char addr_type);
+extern void __hw_addr_del_multiple(struct netdev_hw_addr_list *to_list,
+				   struct netdev_hw_addr_list *from_list,
+				   int addr_len, unsigned char addr_type);
+extern int __hw_addr_sync(struct netdev_hw_addr_list *to_list,
+			  struct netdev_hw_addr_list *from_list,
+			  int addr_len);
+extern void __hw_addr_unsync(struct netdev_hw_addr_list *to_list,
+			     struct netdev_hw_addr_list *from_list,
+			     int addr_len);
+extern void __hw_addr_flush(struct netdev_hw_addr_list *list);
+extern void __hw_addr_init(struct netdev_hw_addr_list *list);
+
+/* Functions used for device addresses handling */
+extern int dev_addr_add(struct net_device *dev, unsigned char *addr,
+			unsigned char addr_type);
+extern int dev_addr_del(struct net_device *dev, unsigned char *addr,
+			unsigned char addr_type);
+extern int dev_addr_add_multiple(struct net_device *to_dev,
+				 struct net_device *from_dev,
+				 unsigned char addr_type);
+extern int dev_addr_del_multiple(struct net_device *to_dev,
+				 struct net_device *from_dev,
+				 unsigned char addr_type);
+extern void dev_addr_flush(struct net_device *dev);
+extern int dev_addr_init(struct net_device *dev);
+
+/* Functions used for unicast addresses handling */
+extern int dev_uc_add(struct net_device *dev, unsigned char *addr);
+extern int dev_uc_del(struct net_device *dev, unsigned char *addr);
+extern int dev_uc_sync(struct net_device *to, struct net_device *from);
+extern void dev_uc_unsync(struct net_device *to, struct net_device *from);
+extern void dev_uc_flush(struct net_device *dev);
+extern void dev_uc_init(struct net_device *dev);
+
+/* Functions used for multicast addresses handling */
+extern int dev_mc_add(struct net_device *dev, unsigned char *addr);
+extern int dev_mc_add_global(struct net_device *dev, unsigned char *addr);
+extern int dev_mc_del(struct net_device *dev, unsigned char *addr);
+extern int dev_mc_del_global(struct net_device *dev, unsigned char *addr);
+extern int dev_mc_sync(struct net_device *to, struct net_device *from);
+extern void dev_mc_unsync(struct net_device *to, struct net_device *from);
+extern void dev_mc_flush(struct net_device *dev);
+extern void dev_mc_init(struct net_device *dev);
+
+/* Functions used for secondary unicast and multicast support */
+extern void		dev_set_rx_mode(struct net_device *dev);
+extern void		__dev_set_rx_mode(struct net_device *dev);
+extern int		dev_set_promiscuity(struct net_device *dev, int inc);
+extern int		dev_set_allmulti(struct net_device *dev, int inc);
+extern void		netdev_state_change(struct net_device *dev);
+extern int		netdev_bonding_change(struct net_device *dev,
+					      unsigned long event);
+extern void		netdev_features_change(struct net_device *dev);
+/* Load a device via the kmod */
+extern void		dev_load(struct net *net, const char *name);
+extern void		dev_mcast_init(void);
+extern const struct net_device_stats *dev_get_stats(struct net_device *dev);
+extern void		dev_txq_stats_fold(const struct net_device *dev, struct net_device_stats *stats);
+
+extern int		netdev_max_backlog;
+extern int		netdev_tstamp_prequeue;
+extern int		weight_p;
+extern int		netdev_set_master(struct net_device *dev, struct net_device *master);
+extern int skb_checksum_help(struct sk_buff *skb);
+extern struct sk_buff *skb_gso_segment(struct sk_buff *skb, int features);
+#ifdef CONFIG_BUG
+extern void netdev_rx_csum_fault(struct net_device *dev);
+#else
+static inline void netdev_rx_csum_fault(struct net_device *dev)
+{
+}
+#endif
+/* rx skb timestamps */
+extern void		net_enable_timestamp(void);
+extern void		net_disable_timestamp(void);
+
+#ifdef CONFIG_PROC_FS
+extern void *dev_seq_start(struct seq_file *seq, loff_t *pos);
+extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos);
+extern void dev_seq_stop(struct seq_file *seq, void *v);
+#endif
+
+extern int netdev_class_create_file(struct class_attribute *class_attr);
+extern void netdev_class_remove_file(struct class_attribute *class_attr);
+
+extern char *netdev_drivername(const struct net_device *dev, char *buffer, int len);
+
+extern void linkwatch_run_queue(void);
+
+unsigned long netdev_increment_features(unsigned long all, unsigned long one,
+					unsigned long mask);
+unsigned long netdev_fix_features(unsigned long features, const char *name);
+
+void netif_stacked_transfer_operstate(const struct net_device *rootdev,
+					struct net_device *dev);
+
+static inline int net_gso_ok(int features, int gso_type)
+{
+	int feature = gso_type << NETIF_F_GSO_SHIFT;
+	return (features & feature) == feature;
+}
+
+static inline int skb_gso_ok(struct sk_buff *skb, int features)
+{
+	return net_gso_ok(features, skb_shinfo(skb)->gso_type) &&
+	       (!skb_has_frags(skb) || (features & NETIF_F_FRAGLIST));
+}
+
+static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb)
+{
+	return skb_is_gso(skb) &&
+	       (!skb_gso_ok(skb, dev->features) ||
+		unlikely(skb->ip_summed != CHECKSUM_PARTIAL));
+}
+
+static inline void netif_set_gso_max_size(struct net_device *dev,
+					  unsigned int size)
+{
+	dev->gso_max_size = size;
+}
+
+extern int __skb_bond_should_drop(struct sk_buff *skb,
+				  struct net_device *master);
+
+static inline int skb_bond_should_drop(struct sk_buff *skb,
+				       struct net_device *master)
+{
+	if (master)
+		return __skb_bond_should_drop(skb, master);
+	return 0;
+}
+
+extern struct pernet_operations __net_initdata loopback_net_ops;
+
+static inline int dev_ethtool_get_settings(struct net_device *dev,
+					   struct ethtool_cmd *cmd)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings)
+		return -EOPNOTSUPP;
+	return dev->ethtool_ops->get_settings(dev, cmd);
+}
+
+static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_rx_csum)
+		return 0;
+	return dev->ethtool_ops->get_rx_csum(dev);
+}
+
+static inline u32 dev_ethtool_get_flags(struct net_device *dev)
+{
+	if (!dev->ethtool_ops || !dev->ethtool_ops->get_flags)
+		return 0;
+	return dev->ethtool_ops->get_flags(dev);
+}
+
+/* Logging, debugging and troubleshooting/diagnostic helpers. */
+
+/* netdev_printk helpers, similar to dev_printk */
+
+static inline const char *netdev_name(const struct net_device *dev)
+{
+	if (dev->reg_state != NETREG_REGISTERED)
+		return "(unregistered net_device)";
+	return dev->name;
+}
+
+#define netdev_printk(level, netdev, format, args...)		\
+	dev_printk(level, (netdev)->dev.parent,			\
+		   "%s: " format,				\
+		   netdev_name(netdev), ##args)
+
+#define netdev_emerg(dev, format, args...)			\
+	netdev_printk(KERN_EMERG, dev, format, ##args)
+#define netdev_alert(dev, format, args...)			\
+	netdev_printk(KERN_ALERT, dev, format, ##args)
+#define netdev_crit(dev, format, args...)			\
+	netdev_printk(KERN_CRIT, dev, format, ##args)
+#define netdev_err(dev, format, args...)			\
+	netdev_printk(KERN_ERR, dev, format, ##args)
+#define netdev_warn(dev, format, args...)			\
+	netdev_printk(KERN_WARNING, dev, format, ##args)
+#define netdev_notice(dev, format, args...)			\
+	netdev_printk(KERN_NOTICE, dev, format, ##args)
+#define netdev_info(dev, format, args...)			\
+	netdev_printk(KERN_INFO, dev, format, ##args)
+
+#if defined(DEBUG)
+#define netdev_dbg(__dev, format, args...)			\
+	netdev_printk(KERN_DEBUG, __dev, format, ##args)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+#define netdev_dbg(__dev, format, args...)			\
+do {								\
+	dynamic_dev_dbg((__dev)->dev.parent, "%s: " format,	\
+			netdev_name(__dev), ##args);		\
+} while (0)
+#else
+#define netdev_dbg(__dev, format, args...)			\
+({								\
+	if (0)							\
+		netdev_printk(KERN_DEBUG, __dev, format, ##args); \
+	0;							\
+})
+#endif
+
+#if defined(VERBOSE_DEBUG)
+#define netdev_vdbg	netdev_dbg
+#else
+
+#define netdev_vdbg(dev, format, args...)			\
+({								\
+	if (0)							\
+		netdev_printk(KERN_DEBUG, dev, format, ##args);	\
+	0;							\
+})
+#endif
+
+/*
+ * netdev_WARN() acts like dev_printk(), but with the key difference
+ * of using a WARN/WARN_ON to get the message out, including the
+ * file/line information and a backtrace.
+ */
+#define netdev_WARN(dev, format, args...)			\
+	WARN(1, "netdevice: %s\n" format, netdev_name(dev), ##args);
+
+/* netif printk helpers, similar to netdev_printk */
+
+#define netif_printk(priv, type, level, dev, fmt, args...)	\
+do {					  			\
+	if (netif_msg_##type(priv))				\
+		netdev_printk(level, (dev), fmt, ##args);	\
+} while (0)
+
+#define netif_emerg(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_EMERG, dev, fmt, ##args)
+#define netif_alert(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_ALERT, dev, fmt, ##args)
+#define netif_crit(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_CRIT, dev, fmt, ##args)
+#define netif_err(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_ERR, dev, fmt, ##args)
+#define netif_warn(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_WARNING, dev, fmt, ##args)
+#define netif_notice(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_NOTICE, dev, fmt, ##args)
+#define netif_info(priv, type, dev, fmt, args...)		\
+	netif_printk(priv, type, KERN_INFO, (dev), fmt, ##args)
+
+#if defined(DEBUG)
+#define netif_dbg(priv, type, dev, format, args...)		\
+	netif_printk(priv, type, KERN_DEBUG, dev, format, ##args)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+#define netif_dbg(priv, type, netdev, format, args...)		\
+do {								\
+	if (netif_msg_##type(priv))				\
+		dynamic_dev_dbg((netdev)->dev.parent,		\
+				"%s: " format,			\
+				netdev_name(netdev), ##args);	\
+} while (0)
+#else
+#define netif_dbg(priv, type, dev, format, args...)			\
+({									\
+	if (0)								\
+		netif_printk(priv, type, KERN_DEBUG, dev, format, ##args); \
+	0;								\
+})
+#endif
+
+#if defined(VERBOSE_DEBUG)
+#define netif_vdbg	netif_dbg
+#else
+#define netif_vdbg(priv, type, dev, format, args...)		\
+({								\
+	if (0)							\
+		netif_printk(priv, type, KERN_DEBUG, dev, format, ##args); \
+	0;							\
+})
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif	/* _LINUX_NETDEVICE_H */
diff -Nur linux-2.6.35.7.orig/include/linux/nxp_74hc153.h linux-2.6.35.7/include/linux/nxp_74hc153.h
--- linux-2.6.35.7.orig/include/linux/nxp_74hc153.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/include/linux/nxp_74hc153.h	2010-10-14 20:28:01.798101112 +0200
@@ -0,0 +1,24 @@
+/*
+ *  NXP 74HC153 - Dual 4-input multiplexer defines
+ *
+ *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef _NXP_74HC153_H
+#define _NXP_74HC153_H
+
+#define NXP_74HC153_DRIVER_NAME "nxp-74hc153"
+
+struct nxp_74hc153_platform_data {
+	unsigned	gpio_base;
+	unsigned	gpio_pin_s0;
+	unsigned	gpio_pin_s1;
+	unsigned	gpio_pin_1y;
+	unsigned	gpio_pin_2y;
+};
+
+#endif /* _NXP_74HC153_H */
diff -Nur linux-2.6.35.7.orig/include/linux/phy.h linux-2.6.35.7/include/linux/phy.h
--- linux-2.6.35.7.orig/include/linux/phy.h	2010-09-29 03:09:08.000000000 +0200
+++ linux-2.6.35.7/include/linux/phy.h	2010-10-14 20:28:01.834368168 +0200
@@ -330,6 +330,20 @@
 	void (*adjust_link)(struct net_device *dev);
 
 	void (*adjust_state)(struct net_device *dev);
+
+	/*
+	 * By default these point to the original functions
+	 * with the same name. adding them to the phy_device
+	 * allows the phy driver to override them for packet
+	 * mangling if the ethernet driver supports it
+	 * This is required to support some really horrible
+	 * switches such as the Marvell 88E6060
+	 */
+	int (*netif_receive_skb)(struct sk_buff *skb);
+	int (*netif_rx)(struct sk_buff *skb);
+
+	/* alignment offset for packets */
+	int pkt_align;
 };
 #define to_phy_device(d) container_of(d, struct phy_device, dev)
 
@@ -497,6 +511,7 @@
 void phy_stop_machine(struct phy_device *phydev);
 int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
 int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
 int phy_mii_ioctl(struct phy_device *phydev,
 		struct mii_ioctl_data *mii_data, int cmd);
 int phy_start_interrupts(struct phy_device *phydev);
diff -Nur linux-2.6.35.7.orig/include/linux/phy.h.orig linux-2.6.35.7/include/linux/phy.h.orig
--- linux-2.6.35.7.orig/include/linux/phy.h.orig	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/include/linux/phy.h.orig	2010-09-29 03:09:08.000000000 +0200
@@ -0,0 +1,519 @@
+/*
+ * include/linux/phy.h
+ *
+ * Framework and drivers for configuring and reading different PHYs
+ * Based on code in sungem_phy.c and gianfar_phy.c
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __PHY_H
+#define __PHY_H
+
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/mod_devicetable.h>
+
+#include <asm/atomic.h>
+
+#define PHY_BASIC_FEATURES	(SUPPORTED_10baseT_Half | \
+				 SUPPORTED_10baseT_Full | \
+				 SUPPORTED_100baseT_Half | \
+				 SUPPORTED_100baseT_Full | \
+				 SUPPORTED_Autoneg | \
+				 SUPPORTED_TP | \
+				 SUPPORTED_MII)
+
+#define PHY_GBIT_FEATURES	(PHY_BASIC_FEATURES | \
+				 SUPPORTED_1000baseT_Half | \
+				 SUPPORTED_1000baseT_Full)
+
+/*
+ * Set phydev->irq to PHY_POLL if interrupts are not supported,
+ * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
+ * the attached driver handles the interrupt
+ */
+#define PHY_POLL		-1
+#define PHY_IGNORE_INTERRUPT	-2
+
+#define PHY_HAS_INTERRUPT	0x00000001
+#define PHY_HAS_MAGICANEG	0x00000002
+
+/* Interface Mode definitions */
+typedef enum {
+	PHY_INTERFACE_MODE_MII,
+	PHY_INTERFACE_MODE_GMII,
+	PHY_INTERFACE_MODE_SGMII,
+	PHY_INTERFACE_MODE_TBI,
+	PHY_INTERFACE_MODE_RMII,
+	PHY_INTERFACE_MODE_RGMII,
+	PHY_INTERFACE_MODE_RGMII_ID,
+	PHY_INTERFACE_MODE_RGMII_RXID,
+	PHY_INTERFACE_MODE_RGMII_TXID,
+	PHY_INTERFACE_MODE_RTBI
+} phy_interface_t;
+
+
+#define PHY_INIT_TIMEOUT	100000
+#define PHY_STATE_TIME		1
+#define PHY_FORCE_TIMEOUT	10
+#define PHY_AN_TIMEOUT		10
+
+#define PHY_MAX_ADDR	32
+
+/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
+#define PHY_ID_FMT "%s:%02x"
+
+/*
+ * Need to be a little smaller than phydev->dev.bus_id to leave room
+ * for the ":%02x"
+ */
+#define MII_BUS_ID_SIZE	(20 - 3)
+
+/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
+   IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
+#define MII_ADDR_C45 (1<<30)
+
+/*
+ * The Bus class for PHYs.  Devices which provide access to
+ * PHYs should register using this structure
+ */
+struct mii_bus {
+	const char *name;
+	char id[MII_BUS_ID_SIZE];
+	void *priv;
+	int (*read)(struct mii_bus *bus, int phy_id, int regnum);
+	int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
+	int (*reset)(struct mii_bus *bus);
+
+	/*
+	 * A lock to ensure that only one thing can read/write
+	 * the MDIO bus at a time
+	 */
+	struct mutex mdio_lock;
+
+	struct device *parent;
+	enum {
+		MDIOBUS_ALLOCATED = 1,
+		MDIOBUS_REGISTERED,
+		MDIOBUS_UNREGISTERED,
+		MDIOBUS_RELEASED,
+	} state;
+	struct device dev;
+
+	/* list of all PHYs on bus */
+	struct phy_device *phy_map[PHY_MAX_ADDR];
+
+	/* Phy addresses to be ignored when probing */
+	u32 phy_mask;
+
+	/*
+	 * Pointer to an array of interrupts, each PHY's
+	 * interrupt at the index matching its address
+	 */
+	int *irq;
+};
+#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
+
+struct mii_bus *mdiobus_alloc(void);
+int mdiobus_register(struct mii_bus *bus);
+void mdiobus_unregister(struct mii_bus *bus);
+void mdiobus_free(struct mii_bus *bus);
+struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
+int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
+int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
+
+
+#define PHY_INTERRUPT_DISABLED	0x0
+#define PHY_INTERRUPT_ENABLED	0x80000000
+
+/* PHY state machine states:
+ *
+ * DOWN: PHY device and driver are not ready for anything.  probe
+ * should be called if and only if the PHY is in this state,
+ * given that the PHY device exists.
+ * - PHY driver probe function will, depending on the PHY, set
+ * the state to STARTING or READY
+ *
+ * STARTING:  PHY device is coming up, and the ethernet driver is
+ * not ready.  PHY drivers may set this in the probe function.
+ * If they do, they are responsible for making sure the state is
+ * eventually set to indicate whether the PHY is UP or READY,
+ * depending on the state when the PHY is done starting up.
+ * - PHY driver will set the state to READY
+ * - start will set the state to PENDING
+ *
+ * READY: PHY is ready to send and receive packets, but the
+ * controller is not.  By default, PHYs which do not implement
+ * probe will be set to this state by phy_probe().  If the PHY
+ * driver knows the PHY is ready, and the PHY state is STARTING,
+ * then it sets this STATE.
+ * - start will set the state to UP
+ *
+ * PENDING: PHY device is coming up, but the ethernet driver is
+ * ready.  phy_start will set this state if the PHY state is
+ * STARTING.
+ * - PHY driver will set the state to UP when the PHY is ready
+ *
+ * UP: The PHY and attached device are ready to do work.
+ * Interrupts should be started here.
+ * - timer moves to AN
+ *
+ * AN: The PHY is currently negotiating the link state.  Link is
+ * therefore down for now.  phy_timer will set this state when it
+ * detects the state is UP.  config_aneg will set this state
+ * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
+ * - If autonegotiation finishes, but there's no link, it sets
+ *   the state to NOLINK.
+ * - If aneg finishes with link, it sets the state to RUNNING,
+ *   and calls adjust_link
+ * - If autonegotiation did not finish after an arbitrary amount
+ *   of time, autonegotiation should be tried again if the PHY
+ *   supports "magic" autonegotiation (back to AN)
+ * - If it didn't finish, and no magic_aneg, move to FORCING.
+ *
+ * NOLINK: PHY is up, but not currently plugged in.
+ * - If the timer notes that the link comes back, we move to RUNNING
+ * - config_aneg moves to AN
+ * - phy_stop moves to HALTED
+ *
+ * FORCING: PHY is being configured with forced settings
+ * - if link is up, move to RUNNING
+ * - If link is down, we drop to the next highest setting, and
+ *   retry (FORCING) after a timeout
+ * - phy_stop moves to HALTED
+ *
+ * RUNNING: PHY is currently up, running, and possibly sending
+ * and/or receiving packets
+ * - timer will set CHANGELINK if we're polling (this ensures the
+ *   link state is polled every other cycle of this state machine,
+ *   which makes it every other second)
+ * - irq will set CHANGELINK
+ * - config_aneg will set AN
+ * - phy_stop moves to HALTED
+ *
+ * CHANGELINK: PHY experienced a change in link state
+ * - timer moves to RUNNING if link
+ * - timer moves to NOLINK if the link is down
+ * - phy_stop moves to HALTED
+ *
+ * HALTED: PHY is up, but no polling or interrupts are done. Or
+ * PHY is in an error state.
+ *
+ * - phy_start moves to RESUMING
+ *
+ * RESUMING: PHY was halted, but now wants to run again.
+ * - If we are forcing, or aneg is done, timer moves to RUNNING
+ * - If aneg is not done, timer moves to AN
+ * - phy_stop moves to HALTED
+ */
+enum phy_state {
+	PHY_DOWN=0,
+	PHY_STARTING,
+	PHY_READY,
+	PHY_PENDING,
+	PHY_UP,
+	PHY_AN,
+	PHY_RUNNING,
+	PHY_NOLINK,
+	PHY_FORCING,
+	PHY_CHANGELINK,
+	PHY_HALTED,
+	PHY_RESUMING
+};
+
+/* phy_device: An instance of a PHY
+ *
+ * drv: Pointer to the driver for this PHY instance
+ * bus: Pointer to the bus this PHY is on
+ * dev: driver model device structure for this PHY
+ * phy_id: UID for this device found during discovery
+ * state: state of the PHY for management purposes
+ * dev_flags: Device-specific flags used by the PHY driver.
+ * addr: Bus address of PHY
+ * link_timeout: The number of timer firings to wait before the
+ * giving up on the current attempt at acquiring a link
+ * irq: IRQ number of the PHY's interrupt (-1 if none)
+ * phy_timer: The timer for handling the state machine
+ * phy_queue: A work_queue for the interrupt
+ * attached_dev: The attached enet driver's device instance ptr
+ * adjust_link: Callback for the enet controller to respond to
+ * changes in the link state.
+ * adjust_state: Callback for the enet driver to respond to
+ * changes in the state machine.
+ *
+ * speed, duplex, pause, supported, advertising, and
+ * autoneg are used like in mii_if_info
+ *
+ * interrupts currently only supports enabled or disabled,
+ * but could be changed in the future to support enabling
+ * and disabling specific interrupts
+ *
+ * Contains some infrastructure for polling and interrupt
+ * handling, as well as handling shifts in PHY hardware state
+ */
+struct phy_device {
+	/* Information about the PHY type */
+	/* And management functions */
+	struct phy_driver *drv;
+
+	struct mii_bus *bus;
+
+	struct device dev;
+
+	u32 phy_id;
+
+	enum phy_state state;
+
+	u32 dev_flags;
+
+	phy_interface_t interface;
+
+	/* Bus address of the PHY (0-32) */
+	int addr;
+
+	/*
+	 * forced speed & duplex (no autoneg)
+	 * partner speed & duplex & pause (autoneg)
+	 */
+	int speed;
+	int duplex;
+	int pause;
+	int asym_pause;
+
+	/* The most recently read link state */
+	int link;
+
+	/* Enabled Interrupts */
+	u32 interrupts;
+
+	/* Union of PHY and Attached devices' supported modes */
+	/* See mii.h for more info */
+	u32 supported;
+	u32 advertising;
+
+	int autoneg;
+
+	int link_timeout;
+
+	/*
+	 * Interrupt number for this PHY
+	 * -1 means no interrupt
+	 */
+	int irq;
+
+	/* private data pointer */
+	/* For use by PHYs to maintain extra state */
+	void *priv;
+
+	/* Interrupt and Polling infrastructure */
+	struct work_struct phy_queue;
+	struct delayed_work state_queue;
+	atomic_t irq_disable;
+
+	struct mutex lock;
+
+	struct net_device *attached_dev;
+
+	void (*adjust_link)(struct net_device *dev);
+
+	void (*adjust_state)(struct net_device *dev);
+};
+#define to_phy_device(d) container_of(d, struct phy_device, dev)
+
+/* struct phy_driver: Driver structure for a particular PHY type
+ *
+ * phy_id: The result of reading the UID registers of this PHY
+ *   type, and ANDing them with the phy_id_mask.  This driver
+ *   only works for PHYs with IDs which match this field
+ * name: The friendly name of this PHY type
+ * phy_id_mask: Defines the important bits of the phy_id
+ * features: A list of features (speed, duplex, etc) supported
+ *   by this PHY
+ * flags: A bitfield defining certain other features this PHY
+ *   supports (like interrupts)
+ *
+ * The drivers must implement config_aneg and read_status.  All
+ * other functions are optional. Note that none of these
+ * functions should be called from interrupt time.  The goal is
+ * for the bus read/write functions to be able to block when the
+ * bus transaction is happening, and be freed up by an interrupt
+ * (The MPC85xx has this ability, though it is not currently
+ * supported in the driver).
+ */
+struct phy_driver {
+	u32 phy_id;
+	char *name;
+	unsigned int phy_id_mask;
+	u32 features;
+	u32 flags;
+
+	/*
+	 * Called to initialize the PHY,
+	 * including after a reset
+	 */
+	int (*config_init)(struct phy_device *phydev);
+
+	/*
+	 * Called during discovery.  Used to set
+	 * up device-specific structures, if any
+	 */
+	int (*probe)(struct phy_device *phydev);
+
+	/* PHY Power Management */
+	int (*suspend)(struct phy_device *phydev);
+	int (*resume)(struct phy_device *phydev);
+
+	/*
+	 * Configures the advertisement and resets
+	 * autonegotiation if phydev->autoneg is on,
+	 * forces the speed to the current settings in phydev
+	 * if phydev->autoneg is off
+	 */
+	int (*config_aneg)(struct phy_device *phydev);
+
+	/* Determines the negotiated speed and duplex */
+	int (*read_status)(struct phy_device *phydev);
+
+	/* Clears any pending interrupts */
+	int (*ack_interrupt)(struct phy_device *phydev);
+
+	/* Enables or disables interrupts */
+	int (*config_intr)(struct phy_device *phydev);
+
+	/*
+	 * Checks if the PHY generated an interrupt.
+	 * For multi-PHY devices with shared PHY interrupt pin
+	 */
+	int (*did_interrupt)(struct phy_device *phydev);
+
+	/* Clears up any memory if needed */
+	void (*remove)(struct phy_device *phydev);
+
+	struct device_driver driver;
+};
+#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
+
+#define PHY_ANY_ID "MATCH ANY PHY"
+#define PHY_ANY_UID 0xffffffff
+
+/* A Structure for boards to register fixups with the PHY Lib */
+struct phy_fixup {
+	struct list_head list;
+	char bus_id[20];
+	u32 phy_uid;
+	u32 phy_uid_mask;
+	int (*run)(struct phy_device *phydev);
+};
+
+/**
+ * phy_read - Convenience function for reading a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to read
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+static inline int phy_read(struct phy_device *phydev, u32 regnum)
+{
+	return mdiobus_read(phydev->bus, phydev->addr, regnum);
+}
+
+/**
+ * phy_write - Convenience function for writing a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val)
+{
+	return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
+}
+
+int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
+struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
+int phy_device_register(struct phy_device *phy);
+int phy_clear_interrupt(struct phy_device *phydev);
+int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
+int phy_init_hw(struct phy_device *phydev);
+int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+		u32 flags, phy_interface_t interface);
+struct phy_device * phy_attach(struct net_device *dev,
+		const char *bus_id, u32 flags, phy_interface_t interface);
+struct phy_device *phy_find_first(struct mii_bus *bus);
+int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
+		void (*handler)(struct net_device *), u32 flags,
+		phy_interface_t interface);
+struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
+		void (*handler)(struct net_device *), u32 flags,
+		phy_interface_t interface);
+void phy_disconnect(struct phy_device *phydev);
+void phy_detach(struct phy_device *phydev);
+void phy_start(struct phy_device *phydev);
+void phy_stop(struct phy_device *phydev);
+int phy_start_aneg(struct phy_device *phydev);
+
+void phy_sanitize_settings(struct phy_device *phydev);
+int phy_stop_interrupts(struct phy_device *phydev);
+int phy_enable_interrupts(struct phy_device *phydev);
+int phy_disable_interrupts(struct phy_device *phydev);
+
+static inline int phy_read_status(struct phy_device *phydev) {
+	return phydev->drv->read_status(phydev);
+}
+
+int genphy_config_advert(struct phy_device *phydev);
+int genphy_setup_forced(struct phy_device *phydev);
+int genphy_restart_aneg(struct phy_device *phydev);
+int genphy_config_aneg(struct phy_device *phydev);
+int genphy_update_link(struct phy_device *phydev);
+int genphy_read_status(struct phy_device *phydev);
+int genphy_suspend(struct phy_device *phydev);
+int genphy_resume(struct phy_device *phydev);
+void phy_driver_unregister(struct phy_driver *drv);
+int phy_driver_register(struct phy_driver *new_driver);
+void phy_prepare_link(struct phy_device *phydev,
+		void (*adjust_link)(struct net_device *));
+void phy_state_machine(struct work_struct *work);
+void phy_start_machine(struct phy_device *phydev,
+		void (*handler)(struct net_device *));
+void phy_stop_machine(struct phy_device *phydev);
+int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+int phy_mii_ioctl(struct phy_device *phydev,
+		struct mii_ioctl_data *mii_data, int cmd);
+int phy_start_interrupts(struct phy_device *phydev);
+void phy_print_status(struct phy_device *phydev);
+struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
+void phy_device_free(struct phy_device *phydev);
+
+int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
+		int (*run)(struct phy_device *));
+int phy_register_fixup_for_id(const char *bus_id,
+		int (*run)(struct phy_device *));
+int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
+		int (*run)(struct phy_device *));
+int phy_scan_fixups(struct phy_device *phydev);
+
+int __init mdio_bus_init(void);
+void mdio_bus_exit(void);
+
+extern struct bus_type mdio_bus_type;
+#endif /* __PHY_H */
diff -Nur linux-2.6.35.7.orig/include/linux/spi/vsc7385.h linux-2.6.35.7/include/linux/spi/vsc7385.h
--- linux-2.6.35.7.orig/include/linux/spi/vsc7385.h	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/include/linux/spi/vsc7385.h	2010-10-14 20:28:01.878101023 +0200
@@ -0,0 +1,19 @@
+/*
+ * Platform data definition for the Vitesse VSC7385 ethernet switch driver
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+struct vsc7385_platform_data {
+	void		(* reset)(void);
+	char		*ucode_name;
+	struct {
+		u32	tx_ipg:5;
+		u32	bit2:1;
+		u32	clk_sel:3;
+	} mac_cfg;
+};
diff -Nur linux-2.6.35.7.orig/net/dsa/ar7240.c linux-2.6.35.7/net/dsa/ar7240.c
--- linux-2.6.35.7.orig/net/dsa/ar7240.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/net/dsa/ar7240.c	2010-10-14 20:28:01.915601104 +0200
@@ -0,0 +1,736 @@
+/*
+ *  DSA driver for the built-in ethernet switch of the Atheros AR7240 SoC
+ *  Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This file was based on:
+ *    net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
+ *    Copyright (c) 2008 Marvell Semiconductor
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/mii.h>
+#include <linux/bitops.h>
+
+#include "dsa_priv.h"
+
+#define BITM(_count)	(BIT(_count) - 1)
+
+#define AR7240_REG_MASK_CTRL		0x00
+#define AR7240_MASK_CTRL_REVISION_M	BITM(8)
+#define AR7240_MASK_CTRL_VERSION_M	BITM(8)
+#define AR7240_MASK_CTRL_VERSION_S	8
+#define AR7240_MASK_CTRL_SOFT_RESET	BIT(31)
+
+#define AR7240_REG_MAC_ADDR0		0x20
+#define AR7240_REG_MAC_ADDR1		0x24
+
+#define AR7240_REG_FLOOD_MASK		0x2c
+#define AR7240_FLOOD_MASK_BROAD_TO_CPU	BIT(26)
+
+#define AR7240_REG_GLOBAL_CTRL		0x30
+#define AR7240_GLOBAL_CTRL_MTU_M	BITM(12)
+
+#define AR7240_REG_AT_CTRL		0x5c
+#define AR7240_AT_CTRL_ARP_EN		BIT(20)
+
+#define AR7240_REG_TAG_PRIORITY		0x70
+
+#define AR7240_REG_SERVICE_TAG		0x74
+#define AR7240_SERVICE_TAG_M		BITM(16)
+
+#define AR7240_REG_CPU_PORT		0x78
+#define AR7240_MIRROR_PORT_S		4
+#define AR7240_CPU_PORT_EN		BIT(8)
+
+#define AR7240_REG_MIB_FUNCTION0	0x80
+#define AR7240_MIB_TIMER_M		BITM(16)
+#define AR7240_MIB_AT_HALF_EN		BIT(16)
+#define AR7240_MIB_BUSY			BIT(17)
+#define AR7240_MIB_FUNC_S		24
+#define AR7240_MIB_FUNC_NO_OP		0x0
+#define AR7240_MIB_FUNC_FLUSH		0x1
+#define AR7240_MIB_FUNC_CAPTURE		0x3
+
+#define AR7240_REG_MDIO_CTRL		0x98
+#define AR7240_MDIO_CTRL_DATA_M		BITM(16)
+#define AR7240_MDIO_CTRL_REG_ADDR_S	16
+#define AR7240_MDIO_CTRL_PHY_ADDR_S	21
+#define AR7240_MDIO_CTRL_CMD_WRITE	0
+#define AR7240_MDIO_CTRL_CMD_READ	BIT(27)
+#define AR7240_MDIO_CTRL_MASTER_EN	BIT(30)
+#define AR7240_MDIO_CTRL_BUSY		BIT(31)
+
+#define AR7240_REG_PORT_BASE(_port)	(0x100 + (_port) * 0x100)
+
+#define AR7240_REG_PORT_STATUS(_port)	(AR7240_REG_PORT_BASE((_port)) + 0x00)
+#define AR7240_PORT_STATUS_SPEED_M	BITM(2)
+#define AR7240_PORT_STATUS_SPEED_10	0
+#define AR7240_PORT_STATUS_SPEED_100	1
+#define AR7240_PORT_STATUS_SPEED_1000	2
+#define AR7240_PORT_STATUS_TXMAC	BIT(2)
+#define AR7240_PORT_STATUS_RXMAC	BIT(3)
+#define AR7240_PORT_STATUS_TXFLOW	BIT(4)
+#define AR7240_PORT_STATUS_RXFLOW	BIT(5)
+#define AR7240_PORT_STATUS_DUPLEX	BIT(6)
+#define AR7240_PORT_STATUS_LINK_UP	BIT(8)
+#define AR7240_PORT_STATUS_LINK_AUTO	BIT(9)
+#define AR7240_PORT_STATUS_LINK_PAUSE	BIT(10)
+
+#define AR7240_REG_PORT_CTRL(_port)	(AR7240_REG_PORT_BASE((_port)) + 0x04)
+#define AR7240_PORT_CTRL_STATE_M	BITM(3)
+#define	AR7240_PORT_CTRL_STATE_DISABLED	0
+#define AR7240_PORT_CTRL_STATE_BLOCK	1
+#define AR7240_PORT_CTRL_STATE_LISTEN	2
+#define AR7240_PORT_CTRL_STATE_LEARN	3
+#define AR7240_PORT_CTRL_STATE_FORWARD	4
+#define AR7240_PORT_CTRL_LEARN_LOCK	BIT(7)
+#define AR7240_PORT_CTRL_VLAN_MODE_S	8
+#define AR7240_PORT_CTRL_VLAN_MODE_KEEP	0
+#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1
+#define AR7240_PORT_CTRL_VLAN_MODE_ADD	2
+#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3
+#define AR7240_PORT_CTRL_IGMP_SNOOP	BIT(10)
+#define AR7240_PORT_CTRL_HEADER		BIT(11)
+#define AR7240_PORT_CTRL_MAC_LOOP	BIT(12)
+#define AR7240_PORT_CTRL_SINGLE_VLAN	BIT(13)
+#define AR7240_PORT_CTRL_LEARN		BIT(14)
+#define AR7240_PORT_CTRL_DOUBLE_TAG	BIT(15)
+#define AR7240_PORT_CTRL_MIRROR_TX	BIT(16)
+#define AR7240_PORT_CTRL_MIRROR_RX	BIT(17)
+
+#define AR7240_REG_PORT_VLAN(_port)	(AR7240_REG_PORT_BASE((_port)) + 0x08)
+
+#define AR7240_PORT_VLAN_DEFAULT_ID_S	0
+#define AR7240_PORT_VLAN_DEST_PORTS_S	16
+
+#define AR7240_REG_STATS_BASE(_port)	(0x20000 + (_port) * 0x100)
+
+#define AR7240_STATS_RXBROAD		0x00
+#define AR7240_STATS_RXPAUSE		0x04
+#define AR7240_STATS_RXMULTI		0x08
+#define AR7240_STATS_RXFCSERR		0x0c
+#define AR7240_STATS_RXALIGNERR		0x10
+#define AR7240_STATS_RXRUNT		0x14
+#define AR7240_STATS_RXFRAGMENT		0x18
+#define AR7240_STATS_RX64BYTE		0x1c
+#define AR7240_STATS_RX128BYTE		0x20
+#define AR7240_STATS_RX256BYTE		0x24
+#define AR7240_STATS_RX512BYTE		0x28
+#define AR7240_STATS_RX1024BYTE		0x2c
+#define AR7240_STATS_RX1518BYTE		0x30
+#define AR7240_STATS_RXMAXBYTE		0x34
+#define AR7240_STATS_RXTOOLONG		0x38
+#define AR7240_STATS_RXGOODBYTE		0x3c
+#define AR7240_STATS_RXBADBYTE		0x44
+#define AR7240_STATS_RXOVERFLOW		0x4c
+#define AR7240_STATS_FILTERED		0x50
+#define AR7240_STATS_TXBROAD		0x54
+#define AR7240_STATS_TXPAUSE		0x58
+#define AR7240_STATS_TXMULTI		0x5c
+#define AR7240_STATS_TXUNDERRUN		0x60
+#define AR7240_STATS_TX64BYTE		0x64
+#define AR7240_STATS_TX128BYTE		0x68
+#define AR7240_STATS_TX256BYTE		0x6c
+#define AR7240_STATS_TX512BYTE		0x70
+#define AR7240_STATS_TX1024BYTE		0x74
+#define AR7240_STATS_TX1518BYTE		0x78
+#define AR7240_STATS_TXMAXBYTE		0x7c
+#define AR7240_STATS_TXOVERSIZE		0x80
+#define AR7240_STATS_TXBYTE		0x84
+#define AR7240_STATS_TXCOLLISION	0x8c
+#define AR7240_STATS_TXABORTCOL		0x90
+#define AR7240_STATS_TXMULTICOL		0x94
+#define AR7240_STATS_TXSINGLECOL	0x98
+#define AR7240_STATS_TXEXCDEFER		0x9c
+#define AR7240_STATS_TXDEFER		0xa0
+#define AR7240_STATS_TXLATECOL		0xa4
+
+#define AR7240_PORT_CPU		0
+#define AR7240_NUM_PORTS	6
+#define AR7240_NUM_PHYS		5
+
+#define AR7240_PHY_ID1		0x004d
+#define AR7240_PHY_ID2		0xd041
+
+#define AR7240_PORT_MASK(_port)		BIT((_port))
+#define AR7240_PORT_MASK_ALL		BITM(AR7240_NUM_PORTS)
+#define AR7240_PORT_MASK_BUT(_port)	(AR7240_PORT_MASK_ALL & ~BIT((_port)))
+
+struct ar7240sw {
+	struct mii_bus	*mii_bus;
+	struct mutex	reg_mutex;
+	struct mutex	stats_mutex;
+};
+
+struct ar7240sw_hw_stat {
+	char string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int reg;
+};
+
+static inline struct ar7240sw *dsa_to_ar7240sw(struct dsa_switch *ds)
+{
+	return (struct ar7240sw *)(ds + 1);
+}
+
+static inline void ar7240sw_init(struct ar7240sw *as, struct mii_bus *mii)
+{
+	as->mii_bus = mii;
+	mutex_init(&as->reg_mutex);
+	mutex_init(&as->stats_mutex);
+}
+
+static inline u16 mk_phy_addr(u32 reg)
+{
+	return (0x17 & ((reg >> 4) | 0x10));
+}
+
+static inline u16 mk_phy_reg(u32 reg)
+{
+	return ((reg << 1) & 0x1e);
+}
+
+static inline u16 mk_high_addr(u32 reg)
+{
+	return ((reg >> 7) & 0x1ff);
+}
+
+static u32 __ar7240sw_reg_read(struct ar7240sw *as, u32 reg)
+{
+	struct mii_bus *mii = as->mii_bus;
+	u16 phy_addr;
+	u16 phy_reg;
+	u32 hi, lo;
+
+	reg = (reg & 0xfffffffc) >> 2;
+
+	mdiobus_write(mii, 0x1f, 0x10, mk_high_addr(reg));
+
+	phy_addr = mk_phy_addr(reg);
+	phy_reg = mk_phy_reg(reg);
+
+	lo = (u32) mdiobus_read(mii, phy_addr, phy_reg);
+	hi = (u32) mdiobus_read(mii, phy_addr, phy_reg + 1);
+
+	return ((hi << 16) | lo);
+}
+
+static void __ar7240sw_reg_write(struct ar7240sw *as, u32 reg, u32 val)
+{
+	struct mii_bus *mii = as->mii_bus;
+	u16 phy_addr;
+	u16 phy_reg;
+
+	reg = (reg & 0xfffffffc) >> 2;
+
+	mdiobus_write(mii, 0x1f, 0x10, mk_high_addr(reg));
+
+	phy_addr = mk_phy_addr(reg);
+	phy_reg = mk_phy_reg(reg);
+
+	mdiobus_write(mii, phy_addr, phy_reg + 1, (val >> 16));
+	mdiobus_write(mii, phy_addr, phy_reg, (val & 0xffff));
+}
+
+static u32 ar7240sw_reg_read(struct ar7240sw *as, u32 reg_addr)
+{
+	u32 ret;
+
+	mutex_lock(&as->reg_mutex);
+	ret = __ar7240sw_reg_read(as, reg_addr);
+	mutex_unlock(&as->reg_mutex);
+
+	return ret;
+}
+
+static void ar7240sw_reg_write(struct ar7240sw *as, u32 reg_addr, u32 reg_val)
+{
+	mutex_lock(&as->reg_mutex);
+	__ar7240sw_reg_write(as, reg_addr, reg_val);
+	mutex_unlock(&as->reg_mutex);
+}
+
+static u32 ar7240sw_reg_rmw(struct ar7240sw *as, u32 reg, u32 mask, u32 val)
+{
+	u32 t;
+
+	mutex_lock(&as->reg_mutex);
+	t = __ar7240sw_reg_read(as, reg);
+	t &= ~mask;
+	t |= val;
+	__ar7240sw_reg_write(as, reg, t);
+	mutex_unlock(&as->reg_mutex);
+
+	return t;
+}
+
+static void ar7240sw_reg_set(struct ar7240sw *as, u32 reg, u32 val)
+{
+	u32 t;
+
+	mutex_lock(&as->reg_mutex);
+	t = __ar7240sw_reg_read(as, reg);
+	t |= val;
+	__ar7240sw_reg_write(as, reg, t);
+	mutex_unlock(&as->reg_mutex);
+}
+
+static int ar7240sw_reg_wait(struct ar7240sw *as, u32 reg, u32 mask, u32 val,
+			     unsigned timeout)
+{
+	int i;
+
+	for (i = 0; i < timeout; i++) {
+		u32 t;
+
+		t = ar7240sw_reg_read(as, reg);
+		if ((t & mask) == val)
+			return 0;
+
+		msleep(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static u16 ar7240sw_phy_read(struct ar7240sw *as, unsigned phy_addr,
+			     unsigned reg_addr)
+{
+	u32 t;
+	int err;
+
+	if (phy_addr >= AR7240_NUM_PHYS)
+		return 0xffff;
+
+	t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
+	    (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
+	    AR7240_MDIO_CTRL_MASTER_EN |
+	    AR7240_MDIO_CTRL_BUSY |
+	    AR7240_MDIO_CTRL_CMD_READ;
+
+	ar7240sw_reg_write(as, AR7240_REG_MDIO_CTRL, t);
+	err = ar7240sw_reg_wait(as, AR7240_REG_MDIO_CTRL,
+				AR7240_MDIO_CTRL_BUSY, 0, 5);
+	if (err)
+		return 0xffff;
+
+	t = ar7240sw_reg_read(as, AR7240_REG_MDIO_CTRL);
+	return (t & AR7240_MDIO_CTRL_DATA_M);
+}
+
+static int ar7240sw_phy_write(struct ar7240sw *as, unsigned phy_addr,
+			      unsigned reg_addr, u16 reg_val)
+{
+	u32 t;
+	int ret;
+
+	if (phy_addr >= AR7240_NUM_PHYS)
+		return -EINVAL;
+
+	t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
+	    (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
+	    AR7240_MDIO_CTRL_MASTER_EN |
+	    AR7240_MDIO_CTRL_BUSY |
+	    AR7240_MDIO_CTRL_CMD_WRITE |
+	    reg_val;
+
+	ar7240sw_reg_write(as, AR7240_REG_MDIO_CTRL, t);
+	ret = ar7240sw_reg_wait(as, AR7240_REG_MDIO_CTRL,
+				AR7240_MDIO_CTRL_BUSY, 0, 5);
+	return ret;
+}
+
+static int ar7240sw_capture_stats(struct ar7240sw *as)
+{
+	int ret;
+
+	/* Capture the hardware statistics for all ports */
+	ar7240sw_reg_write(as, AR7240_REG_MIB_FUNCTION0,
+			   (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S));
+
+	/* Wait for the capturing to complete. */
+	ret = ar7240sw_reg_wait(as, AR7240_REG_MIB_FUNCTION0,
+				AR7240_MIB_BUSY, 0, 10);
+	return ret;
+}
+
+static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port)
+{
+	ar7240sw_reg_write(as, AR7240_REG_PORT_CTRL(port),
+			   AR7240_PORT_CTRL_STATE_DISABLED);
+}
+
+static int ar7240sw_reset(struct ar7240sw *as)
+{
+	int ret;
+	int i;
+
+	/* Set all ports to disabled state. */
+	for (i = 0; i < AR7240_NUM_PORTS; i++)
+		ar7240sw_disable_port(as, i);
+
+	/* Wait for transmit queues to drain. */
+	msleep(2);
+
+	/* Reset the switch. */
+	ar7240sw_reg_write(as, AR7240_REG_MASK_CTRL,
+			   AR7240_MASK_CTRL_SOFT_RESET);
+
+	ret = ar7240sw_reg_wait(as, AR7240_REG_MASK_CTRL,
+			        AR7240_MASK_CTRL_SOFT_RESET, 0, 1000);
+	return ret;
+}
+
+static void ar7240sw_setup(struct ar7240sw *as)
+{
+	/* Enable CPU port, and disable mirror port */
+	ar7240sw_reg_write(as, AR7240_REG_CPU_PORT,
+			   AR7240_CPU_PORT_EN |
+			   (15 << AR7240_MIRROR_PORT_S));
+
+	/* Setup TAG priority mapping */
+	ar7240sw_reg_write(as, AR7240_REG_TAG_PRIORITY, 0xfa50);
+
+	/* Enable ARP frame acknowledge */
+	ar7240sw_reg_set(as, AR7240_REG_AT_CTRL, AR7240_AT_CTRL_ARP_EN);
+
+	/* Enable Broadcast frames transmitted to the CPU */
+	ar7240sw_reg_set(as, AR7240_REG_FLOOD_MASK,
+			 AR7240_FLOOD_MASK_BROAD_TO_CPU);
+
+	/* setup MTU */
+	ar7240sw_reg_rmw(as, AR7240_REG_GLOBAL_CTRL, AR7240_GLOBAL_CTRL_MTU_M,
+			 1536);
+
+	/* setup Service TAG */
+	ar7240sw_reg_rmw(as, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M,
+			 ETH_P_QINQ);
+}
+
+static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port)
+{
+	u32 ctrl;
+	u32 dest_ports;
+	u32 vlan;
+
+	ctrl = AR7240_PORT_CTRL_STATE_FORWARD;
+
+	if (port == AR7240_PORT_CPU) {
+		ar7240sw_reg_write(as, AR7240_REG_PORT_STATUS(port),
+				   AR7240_PORT_STATUS_SPEED_1000 |
+				   AR7240_PORT_STATUS_TXFLOW |
+				   AR7240_PORT_STATUS_RXFLOW |
+				   AR7240_PORT_STATUS_TXMAC |
+				   AR7240_PORT_STATUS_RXMAC |
+				   AR7240_PORT_STATUS_DUPLEX);
+
+		/* allow the CPU port to talk to each of the 'real' ports */
+		dest_ports = AR7240_PORT_MASK_BUT(port);
+
+		/* remove service tag from ingress frames */
+		ctrl |= AR7240_PORT_CTRL_DOUBLE_TAG;
+	} else {
+		ar7240sw_reg_write(as, AR7240_REG_PORT_STATUS(port),
+				   AR7240_PORT_STATUS_LINK_AUTO);
+
+		/*
+		 * allow each of the 'real' ports to only talk to the CPU
+		 * port.
+		 */
+		dest_ports = AR7240_PORT_MASK(port) |
+			     AR7240_PORT_MASK(AR7240_PORT_CPU);
+
+		/* add service tag to egress frames */
+		ctrl |= (AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG <<
+			 AR7240_PORT_CTRL_VLAN_MODE_S);
+	}
+
+	/* set default VID and and destination ports for this VLAN */
+	vlan = port;
+	vlan |= (dest_ports << AR7240_PORT_VLAN_DEST_PORTS_S);
+
+	ar7240sw_reg_write(as, AR7240_REG_PORT_CTRL(port), ctrl);
+	ar7240sw_reg_write(as, AR7240_REG_PORT_VLAN(port), vlan);
+}
+
+static char *ar7240_dsa_probe(struct mii_bus *mii, int sw_addr)
+{
+	struct ar7240sw as;
+	u32 ctrl;
+	u16 phy_id1;
+	u16 phy_id2;
+	u8 ver;
+
+	ar7240sw_init(&as, mii);
+
+	ctrl = ar7240sw_reg_read(&as, AR7240_REG_MASK_CTRL);
+
+	ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) & AR7240_MASK_CTRL_VERSION_M;
+	if (ver != 1) {
+		pr_err("ar7240_dsa: unsupported chip, ctrl=%08x\n", ctrl);
+		return NULL;
+	}
+
+	phy_id1 = ar7240sw_phy_read(&as, 0, MII_PHYSID1);
+	phy_id2 = ar7240sw_phy_read(&as, 0, MII_PHYSID2);
+	if (phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) {
+		pr_err("ar7240_dsa: unknown phy id '%04x:%04x'\n",
+		       phy_id1, phy_id2);
+		return NULL;
+	}
+
+	return "Atheros AR7240 built-in";
+}
+
+static int ar7240_dsa_setup(struct dsa_switch *ds)
+{
+	struct ar7240sw *as = dsa_to_ar7240sw(ds);
+	int i;
+	int ret;
+
+	ar7240sw_init(as, ds->master_mii_bus);
+
+	ret = ar7240sw_reset(as);
+	if (ret)
+		return ret;
+
+	ar7240sw_setup(as);
+
+	for (i = 0; i < AR7240_NUM_PORTS; i++) {
+		if (dsa_is_cpu_port(ds, i) || (ds->phys_port_mask & (1 << i)))
+			ar7240sw_setup_port(as, i);
+		else
+			ar7240sw_disable_port(as, i);
+	}
+
+	return 0;
+}
+
+static int ar7240_dsa_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+	struct ar7240sw *as = dsa_to_ar7240sw(ds);
+	u32 t;
+
+	t = (addr[4] << 8) | addr[5];
+	ar7240sw_reg_write(as, AR7240_REG_MAC_ADDR0, t);
+
+	t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
+	ar7240sw_reg_write(as, AR7240_REG_MAC_ADDR1, t);
+
+	return 0;
+}
+
+static int ar7240_iort_to_phy_addr(int port)
+{
+	if (port > 0 && port < AR7240_NUM_PORTS)
+		return port - 1;
+
+	return -EINVAL;
+}
+
+static int ar7240_dsa_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+	struct ar7240sw *as = dsa_to_ar7240sw(ds);
+	int phy_addr;
+
+	phy_addr = ar7240_iort_to_phy_addr(port);
+	if (phy_addr < 0)
+		return 0xffff;
+
+	return ar7240sw_phy_read(as, phy_addr, regnum);
+}
+
+static int ar7240_dsa_phy_write(struct dsa_switch *ds, int port, int regnum,
+				u16 val)
+{
+	struct ar7240sw *as = dsa_to_ar7240sw(ds);
+	int phy_addr;
+
+	phy_addr = ar7240_iort_to_phy_addr(port);
+	if (phy_addr < 0)
+		return 0xffff;
+
+	return ar7240sw_phy_write(as, phy_addr, regnum, val);
+}
+
+static const char *ar7240sw_speed_str(unsigned speed)
+{
+	switch (speed) {
+	case AR7240_PORT_STATUS_SPEED_10:
+		return "10";
+	case AR7240_PORT_STATUS_SPEED_100:
+		return "100";
+	case AR7240_PORT_STATUS_SPEED_1000:
+		return "1000";
+	}
+
+	return "????";
+}
+
+static void ar7240_dsa_poll_link(struct dsa_switch *ds)
+{
+	struct ar7240sw *as = dsa_to_ar7240sw(ds);
+	int i;
+
+	for (i = 0; i < DSA_MAX_PORTS; i++) {
+		struct net_device *dev;
+		u32 status;
+		int link;
+		unsigned speed;
+		int duplex;
+
+		dev = ds->ports[i];
+		if (dev == NULL)
+			continue;
+
+		link = 0;
+		if (dev->flags & IFF_UP) {
+			status = ar7240sw_reg_read(as,
+						   AR7240_REG_PORT_STATUS(i));
+			link = !!(status & AR7240_PORT_STATUS_LINK_UP);
+		}
+
+		if (!link) {
+			if (netif_carrier_ok(dev)) {
+				pr_info("%s: link down\n", dev->name);
+				netif_carrier_off(dev);
+			}
+			continue;
+		}
+
+		speed = (status & AR7240_PORT_STATUS_SPEED_M);
+		duplex = (status & AR7240_PORT_STATUS_DUPLEX) ? 1 : 0;
+		if (!netif_carrier_ok(dev)) {
+			pr_info("%s: link up, %sMb/s, %s duplex",
+				dev->name,
+				ar7240sw_speed_str(speed),
+				duplex ? "full" : "half");
+			netif_carrier_on(dev);
+		}
+	}
+}
+
+static const struct ar7240sw_hw_stat ar7240_hw_stats[] = {
+	{ "rx_broadcast"	, 4, AR7240_STATS_RXBROAD, },
+	{ "rx_pause"		, 4, AR7240_STATS_RXPAUSE, },
+	{ "rx_multicast"	, 4, AR7240_STATS_RXMULTI, },
+	{ "rx_fcs_error"	, 4, AR7240_STATS_RXFCSERR, },
+	{ "rx_align_error"	, 4, AR7240_STATS_RXALIGNERR, },
+	{ "rx_undersize"	, 4, AR7240_STATS_RXRUNT, },
+	{ "rx_fragments"	, 4, AR7240_STATS_RXFRAGMENT, },
+	{ "rx_64bytes"		, 4, AR7240_STATS_RX64BYTE, },
+	{ "rx_65_127bytes"	, 4, AR7240_STATS_RX128BYTE, },
+	{ "rx_128_255bytes"	, 4, AR7240_STATS_RX256BYTE, },
+	{ "rx_256_511bytes"	, 4, AR7240_STATS_RX512BYTE, },
+	{ "rx_512_1023bytes"	, 4, AR7240_STATS_RX1024BYTE, },
+	{ "rx_1024_1518bytes"	, 4, AR7240_STATS_RX1518BYTE, },
+	{ "rx_1519_max_bytes"	, 4, AR7240_STATS_RXMAXBYTE, },
+	{ "rx_oversize"		, 4, AR7240_STATS_RXTOOLONG, },
+	{ "rx_good_bytes"	, 8, AR7240_STATS_RXGOODBYTE, },
+	{ "rx_bad_bytes"	, 8, AR7240_STATS_RXBADBYTE, },
+	{ "rx_overflow"		, 4, AR7240_STATS_RXOVERFLOW, },
+	{ "filtered"		, 4, AR7240_STATS_FILTERED, },
+	{ "tx_broadcast"	, 4, AR7240_STATS_TXBROAD, },
+	{ "tx_pause"		, 4, AR7240_STATS_TXPAUSE, },
+	{ "tx_multicast"	, 4, AR7240_STATS_TXMULTI, },
+	{ "tx_underrun"		, 4, AR7240_STATS_TXUNDERRUN, },
+	{ "tx_64bytes"		, 4, AR7240_STATS_TX64BYTE, },
+	{ "tx_65_127bytes"	, 4, AR7240_STATS_TX128BYTE, },
+	{ "tx_128_255bytes"	, 4, AR7240_STATS_TX256BYTE, },
+	{ "tx_256_511bytes"	, 4, AR7240_STATS_TX512BYTE, },
+	{ "tx_512_1023bytes"	, 4, AR7240_STATS_TX1024BYTE, },
+	{ "tx_1024_1518bytes"	, 4, AR7240_STATS_TX1518BYTE, },
+	{ "tx_1519_max_bytes"	, 4, AR7240_STATS_TXMAXBYTE, },
+	{ "tx_oversize"		, 4, AR7240_STATS_TXOVERSIZE, },
+	{ "tx_bytes"		, 8, AR7240_STATS_TXBYTE, },
+	{ "tx_collisions"	, 4, AR7240_STATS_TXCOLLISION, },
+	{ "tx_abort_collisions"	, 4, AR7240_STATS_TXABORTCOL, },
+	{ "tx_multi_collisions"	, 4, AR7240_STATS_TXMULTICOL, },
+	{ "tx_single_collisions", 4, AR7240_STATS_TXSINGLECOL, },
+	{ "tx_excessive_deferred", 4, AR7240_STATS_TXEXCDEFER, },
+	{ "tx_deferred"		, 4, AR7240_STATS_TXDEFER, },
+	{ "tx_late_collisions"	, 4, AR7240_STATS_TXLATECOL, },
+};
+
+static void ar7240_dsa_get_strings(struct dsa_switch *ds, int port,
+				   uint8_t *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ar7240_hw_stats); i++) {
+		memcpy(data + i * ETH_GSTRING_LEN,
+		       ar7240_hw_stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+static void ar7240_dsa_get_ethtool_stats(struct dsa_switch *ds, int port,
+					 uint64_t *data)
+{
+	struct ar7240sw *as = dsa_to_ar7240sw(ds);
+	int err;
+	int i;
+
+	mutex_lock(&as->stats_mutex);
+
+	err = ar7240sw_capture_stats(as);
+	if (err)
+		goto unlock;
+
+	for (i = 0; i < ARRAY_SIZE(ar7240_hw_stats); i++) {
+		const struct ar7240sw_hw_stat *s = &ar7240_hw_stats[i];
+		u32 reg = AR7240_REG_STATS_BASE(port);
+		u32 low;
+		u32 high;
+
+		low = ar7240sw_reg_read(as, reg + s->reg);
+		if (s->sizeof_stat == 8)
+			high = ar7240sw_reg_read(as, reg + s->reg);
+		else
+			high = 0;
+
+		data[i] = (((u64) high) << 32) | low;
+	}
+
+ unlock:
+	mutex_unlock(&as->stats_mutex);
+}
+
+static int ar7240_dsa_get_sset_count(struct dsa_switch *ds)
+{
+	return ARRAY_SIZE(ar7240_hw_stats);
+}
+
+static struct dsa_switch_driver ar7240_dsa_driver = {
+	.tag_protocol		= htons(ETH_P_QINQ),
+	.priv_size		= sizeof(struct ar7240sw),
+	.probe			= ar7240_dsa_probe,
+	.setup			= ar7240_dsa_setup,
+	.set_addr		= ar7240_dsa_set_addr,
+	.phy_read		= ar7240_dsa_phy_read,
+	.phy_write		= ar7240_dsa_phy_write,
+	.poll_link		= ar7240_dsa_poll_link,
+	.get_strings		= ar7240_dsa_get_strings,
+	.get_ethtool_stats	= ar7240_dsa_get_ethtool_stats,
+	.get_sset_count		= ar7240_dsa_get_sset_count,
+};
+
+int __init dsa_ar7240_init(void)
+{
+	register_switch_driver(&ar7240_dsa_driver);
+	return 0;
+}
+module_init(dsa_ar7240_init);
+
+void __exit dsa_ar7240_cleanup(void)
+{
+	unregister_switch_driver(&ar7240_dsa_driver);
+}
+module_exit(dsa_ar7240_cleanup);
diff -Nur linux-2.6.35.7.orig/net/dsa/mv88e6063.c linux-2.6.35.7/net/dsa/mv88e6063.c
--- linux-2.6.35.7.orig/net/dsa/mv88e6063.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/net/dsa/mv88e6063.c	2010-10-14 20:28:01.954381749 +0200
@@ -0,0 +1,294 @@
+/*
+ * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This driver was base on: net/dsa/mv88e6060.c
+ *   net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips
+ *   Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include "dsa_priv.h"
+
+#define REG_BASE		0x10
+#define REG_PHY(p)		(REG_BASE + (p))
+#define REG_PORT(p)		(REG_BASE + 8 + (p))
+#define REG_GLOBAL		(REG_BASE + 0x0f)
+#define NUM_PORTS		7
+
+static int reg_read(struct dsa_switch *ds, int addr, int reg)
+{
+	return mdiobus_read(ds->master_mii_bus, addr, reg);
+}
+
+#define REG_READ(addr, reg)					\
+	({							\
+		int __ret;					\
+								\
+		__ret = reg_read(ds, addr, reg);		\
+		if (__ret < 0)					\
+			return __ret;				\
+		__ret;						\
+	})
+
+
+static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+	return mdiobus_write(ds->master_mii_bus, addr, reg, val);
+}
+
+#define REG_WRITE(addr, reg, val)				\
+	({							\
+		int __ret;					\
+								\
+		__ret = reg_write(ds, addr, reg, val);		\
+		if (__ret < 0)					\
+			return __ret;				\
+	})
+
+static char *mv88e6063_probe(struct mii_bus *bus, int sw_addr)
+{
+	int ret;
+
+	ret = mdiobus_read(bus, REG_PORT(0), 0x03);
+	if (ret >= 0) {
+		ret &= 0xfff0;
+		if (ret == 0x1530)
+			return "Marvell 88E6063";
+	}
+
+	return NULL;
+}
+
+static int mv88e6063_switch_reset(struct dsa_switch *ds)
+{
+	int i;
+	int ret;
+
+	/*
+	 * Set all ports to the disabled state.
+	 */
+	for (i = 0; i < NUM_PORTS; i++) {
+		ret = REG_READ(REG_PORT(i), 0x04);
+		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+	}
+
+	/*
+	 * Wait for transmit queues to drain.
+	 */
+	msleep(2);
+
+	/*
+	 * Reset the switch.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
+
+	/*
+	 * Wait up to one second for reset to complete.
+	 */
+	for (i = 0; i < 1000; i++) {
+		ret = REG_READ(REG_GLOBAL, 0x00);
+		if ((ret & 0x8000) == 0x0000)
+			break;
+
+		msleep(1);
+	}
+	if (i == 1000)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int mv88e6063_setup_global(struct dsa_switch *ds)
+{
+	/*
+	 * Disable discarding of frames with excessive collisions,
+	 * set the maximum frame size to 1536 bytes, and mask all
+	 * interrupt sources.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
+
+	/*
+	 * Enable automatic address learning, set the address
+	 * database size to 1024 entries, and set the default aging
+	 * time to 5 minutes.
+	 */
+	REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
+
+	return 0;
+}
+
+static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
+{
+	int addr = REG_PORT(p);
+
+	/*
+	 * Do not force flow control, disable Ingress and Egress
+	 * Header tagging, disable VLAN tunneling, and set the port
+	 * state to Forwarding.  Additionally, if this is the CPU
+	 * port, enable Ingress and Egress Trailer tagging mode.
+	 */
+	REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ?  0x4103 : 0x0003);
+
+	/*
+	 * Port based VLAN map: give each port its own address
+	 * database, allow the CPU port to talk to each of the 'real'
+	 * ports, and allow each of the 'real' ports to only talk to
+	 * the CPU port.
+	 */
+	REG_WRITE(addr, 0x06,
+			((p & 0xf) << 12) |
+			 (dsa_is_cpu_port(ds, p) ?
+				ds->phys_port_mask :
+				(1 << ds->dst->cpu_port)));
+
+	/*
+	 * Port Association Vector: when learning source addresses
+	 * of packets, add the address to the address database using
+	 * a port bitmap that has only the bit for this port set and
+	 * the other bits clear.
+	 */
+	REG_WRITE(addr, 0x0b, 1 << p);
+
+	return 0;
+}
+
+static int mv88e6063_setup(struct dsa_switch *ds)
+{
+	int i;
+	int ret;
+
+	ret = mv88e6063_switch_reset(ds);
+	if (ret < 0)
+		return ret;
+
+	/* @@@ initialise atu */
+
+	ret = mv88e6063_setup_global(ds);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < NUM_PORTS; i++) {
+		ret = mv88e6063_setup_port(ds, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+	REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
+	REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
+	REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
+
+	return 0;
+}
+
+static int mv88e6063_port_to_phy_addr(int port)
+{
+	if (port >= 0 && port <= NUM_PORTS)
+		return REG_PHY(port);
+	return -1;
+}
+
+static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+	int addr;
+
+	addr = mv88e6063_port_to_phy_addr(port);
+	if (addr == -1)
+		return 0xffff;
+
+	return reg_read(ds, addr, regnum);
+}
+
+static int
+mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
+{
+	int addr;
+
+	addr = mv88e6063_port_to_phy_addr(port);
+	if (addr == -1)
+		return 0xffff;
+
+	return reg_write(ds, addr, regnum, val);
+}
+
+static void mv88e6063_poll_link(struct dsa_switch *ds)
+{
+	int i;
+
+	for (i = 0; i < DSA_MAX_PORTS; i++) {
+		struct net_device *dev;
+		int uninitialized_var(port_status);
+		int link;
+		int speed;
+		int duplex;
+		int fc;
+
+		dev = ds->ports[i];
+		if (dev == NULL)
+			continue;
+
+		link = 0;
+		if (dev->flags & IFF_UP) {
+			port_status = reg_read(ds, REG_PORT(i), 0x00);
+			if (port_status < 0)
+				continue;
+
+			link = !!(port_status & 0x1000);
+		}
+
+		if (!link) {
+			if (netif_carrier_ok(dev)) {
+				printk(KERN_INFO "%s: link down\n", dev->name);
+				netif_carrier_off(dev);
+			}
+			continue;
+		}
+
+		speed = (port_status & 0x0100) ? 100 : 10;
+		duplex = (port_status & 0x0200) ? 1 : 0;
+		fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
+
+		if (!netif_carrier_ok(dev)) {
+			printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
+					 "flow control %sabled\n", dev->name,
+					 speed, duplex ? "full" : "half",
+					 fc ? "en" : "dis");
+			netif_carrier_on(dev);
+		}
+	}
+}
+
+static struct dsa_switch_driver mv88e6063_switch_driver = {
+	.tag_protocol	= htons(ETH_P_TRAILER),
+	.probe		= mv88e6063_probe,
+	.setup		= mv88e6063_setup,
+	.set_addr	= mv88e6063_set_addr,
+	.phy_read	= mv88e6063_phy_read,
+	.phy_write	= mv88e6063_phy_write,
+	.poll_link	= mv88e6063_poll_link,
+};
+
+static int __init mv88e6063_init(void)
+{
+	register_switch_driver(&mv88e6063_switch_driver);
+	return 0;
+}
+module_init(mv88e6063_init);
+
+static void __exit mv88e6063_cleanup(void)
+{
+	unregister_switch_driver(&mv88e6063_switch_driver);
+}
+module_exit(mv88e6063_cleanup);
diff -Nur linux-2.6.35.7.orig/net/dsa/tag_qinq.c linux-2.6.35.7/net/dsa/tag_qinq.c
--- linux-2.6.35.7.orig/net/dsa/tag_qinq.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.35.7/net/dsa/tag_qinq.c	2010-10-14 20:28:01.998101297 +0200
@@ -0,0 +1,127 @@
+/*
+ * net/dsa/tag_qinq.c - QinQ tag format handling
+ * Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This file was based on:
+ *    net/dsa/tag_edsa.c - Ethertype DSA tagging
+ *    Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/if_vlan.h>
+
+#include "dsa_priv.h"
+
+netdev_tx_t qinq_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct dsa_slave_priv *p = netdev_priv(dev);
+	struct vlan_ethhdr *veth;
+	unsigned int len;
+	int ret;
+
+	if (skb_cow_head(skb, VLAN_HLEN) < 0)
+		goto out_free_skb;
+
+	veth = (struct vlan_ethhdr *)skb_push(skb, VLAN_HLEN);
+
+	/* Move the mac addresses to the beginning of the new header. */
+	memmove(skb->data, skb->data + VLAN_HLEN, 2 * VLAN_ETH_ALEN);
+	skb->mac_header -= VLAN_HLEN;
+
+	/* setup VLAN header fields */
+	veth->h_vlan_proto = htons(ETH_P_QINQ);
+	veth->h_vlan_TCI = htons(p->port);
+
+	len = skb->len;
+	skb->protocol = htons(ETH_P_QINQ);
+	skb->dev = p->parent->dst->master_netdev;
+
+	ret = dev_queue_xmit(skb);
+	if (unlikely(ret != NET_XMIT_SUCCESS))
+		goto out_dropped;
+
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += len;
+
+	return NETDEV_TX_OK;
+
+ out_free_skb:
+	kfree_skb(skb);
+ out_dropped:
+	dev->stats.tx_dropped++;
+	return NETDEV_TX_OK;
+}
+
+static int qinq_rcv(struct sk_buff *skb, struct net_device *dev,
+		    struct packet_type *pt, struct net_device *orig_dev)
+{
+	struct dsa_switch_tree *dst;
+	struct dsa_switch *ds;
+	struct vlan_hdr *vhdr;
+	int source_port;
+
+	dst = dev->dsa_ptr;
+	if (unlikely(dst == NULL))
+		goto out_drop;
+	ds = dst->ds[0];
+
+	skb = skb_unshare(skb, GFP_ATOMIC);
+	if (skb == NULL)
+		goto out;
+
+	if (unlikely(!pskb_may_pull(skb, VLAN_HLEN)))
+		goto out_drop;
+
+	vhdr = (struct vlan_hdr *)skb->data;
+	source_port = ntohs(vhdr->h_vlan_TCI) & VLAN_VID_MASK;
+	if (source_port >= DSA_MAX_PORTS || ds->ports[source_port] == NULL)
+		goto out_drop;
+
+	/* Remove the outermost VLAN tag and update checksum. */
+	skb_pull_rcsum(skb, VLAN_HLEN);
+	memmove(skb->data - ETH_HLEN,
+		skb->data - ETH_HLEN - VLAN_HLEN,
+		2 * ETH_ALEN);
+
+	skb->dev = ds->ports[source_port];
+	skb_push(skb, ETH_HLEN);
+	skb->pkt_type = PACKET_HOST;
+	skb->protocol = eth_type_trans(skb, skb->dev);
+
+	skb->dev->stats.rx_packets++;
+	skb->dev->stats.rx_bytes += skb->len;
+
+	netif_receive_skb(skb);
+
+	return 0;
+
+ out_drop:
+	kfree_skb(skb);
+ out:
+	return 0;
+}
+
+static struct packet_type qinq_packet_type __read_mostly = {
+	.type	= cpu_to_be16(ETH_P_QINQ),
+	.func	= qinq_rcv,
+};
+
+static int __init qinq_init_module(void)
+{
+	dev_add_pack(&qinq_packet_type);
+	return 0;
+}
+module_init(qinq_init_module);
+
+static void __exit qinq_cleanup_module(void)
+{
+	dev_remove_pack(&qinq_packet_type);
+}
+module_exit(qinq_cleanup_module);