123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274 |
- menu "Network support"
- depends on ADK_TARGET_WITH_NET \
- || ADK_TARGET_GENERIC
- config ADK_LINUX_KERNEL_NETDEVICES
- bool
- config ADK_LINUX_KERNEL_ETHERNET
- bool
- config ADK_LINUX_KERNEL_NET
- bool
- config ADK_LINUX_KERNEL_PACKET
- bool
- config ADK_LINUX_KERNEL_UNIX
- bool
- config ADK_LINUX_KERNEL_NET_CORE
- bool
- config ADK_LINUX_KERNEL_INET
- bool "Enable TCP/IP support"
- select ADK_LINUX_KERNEL_NET
- select ADK_LINUX_KERNEL_UNIX
- select ADK_LINUX_KERNEL_PACKET
- select ADK_LINUX_KERNEL_NET_CORE
- select ADK_LINUX_KERNEL_NETDEVICES
- select ADK_LINUX_KERNEL_ETHERNET
- select ADK_LINUX_KERNEL_CRYPTO
- select ADK_LINUX_KERNEL_CRYPTO_AES
- default y
- config ADK_LINUX_KERNEL_IP_FIB_HASH
- bool
- default y
- config ADK_LINUX_KERNEL_IPV6
- tristate "Enable IPv6 support"
- select BUSYBOX_FEATURE_IPV6
- help
- This is complemental support for the IP version 6.
- You will still be able to do traditional IPv4 networking as well.
- For general information about IPv6, see
- <http://playground.sun.com/pub/ipng/html/ipng-main.html>.
- For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
- For specific information about IPv6 under Linux, read the HOWTO at
- <http://www.bieringer.de/linux/IPv6/>.
- config ADK_LINUX_KERNEL_IPV6_SIT
- tristate "IPv6-in-IPv4 tunnel (SIT driver)"
- select ADK_LINUX_KERNEL_INET_TUNNEL
- select ADK_LINUX_KERNEL_NET_IP_TUNNEL
- help
- Tunneling means encapsulating data of one protocol type within
- another protocol and sending it over a channel that understands the
- encapsulating protocol. This driver implements encapsulation of IPv6
- into IPv4 packets. This is useful if you want to connect two IPv6
- networks over an IPv4-only path.
- config ADK_LINUX_KERNEL_SYN_COOKIES
- bool "TCP syncookie support"
- config ADK_LINUX_KERNEL_IP_PNP_BOOTP
- bool
- config ADK_LINUX_KERNEL_IP_PNP_RARP
- bool
- config ADK_LINUX_KERNEL_NET_IPGRE_BROADCAST
- bool
- config ADK_LINUX_KERNEL_NET_IPGRE_DEMUX
- bool
- config ADK_LINUX_KERNEL_PPP_ASYNC
- bool
- config ADK_LINUX_KERNEL_SLHC
- bool
- config ADK_LINUX_KERNEL_IMQ
- tristate
- config ADK_LINUX_KERNEL_LLC
- tristate
- config ADK_LINUX_KERNEL_IP_MULTICAST
- bool "Enable IP Multicasting"
- config ADK_LINUX_KERNEL_IP_MROUTE
- bool "Enable IP Multicasting Routing"
- config ADK_LINUX_KERNEL_ATM
- tristate "Asynchronous Transfer Mode (ATM)"
- help
- ATM is a high-speed networking technology for Local Area Networks
- and Wide Area Networks. It uses a fixed packet size and is
- connection oriented, allowing for the negotiation of minimum
- bandwidth requirements.
- In order to participate in an ATM network, your Linux box needs an
- ATM networking card. If you have that, say Y here and to the driver
- of your ATM card below.
- Note that you need a set of user-space programs to actually make use
- of ATM. See the file <file:Documentation/networking/atm.txt> for
- further details.
- config ADK_LINUX_KERNEL_ATM_BR2684
- tristate "BR2684 ATM module"
- select ADK_LINUX_KERNEL_ATM
- config ADK_LINUX_KERNEL_BRIDGE
- tristate "802.1d Ethernet Bridging"
- select ADK_LINUX_KERNEL_LLC
- help
- If you say Y here, then your Linux box will be able to act as an
- Ethernet bridge, which means that the different Ethernet segments it
- is connected to will appear as one Ethernet to the participants.
- Several such bridges can work together to create even larger
- networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
- As this is a standard, Linux bridges will cooperate properly with
- other third party bridge products.
- In order to use the Ethernet bridge, you'll need the bridge
- configuration tools; see <file:Documentation/networking/bridge.txt>
- for location. Please read the Bridge mini-HOWTO for more
- information.
- If you enable iptables support along with the bridge support then you
- turn your bridge into a bridging IP firewall.
- iptables will then see the IP packets being bridged, so you need to
- take this into account when setting up your firewall rules.
- Enabling arptables support when bridging will let arptables see
- bridged ARP traffic in the arptables FORWARD chain.
- config ADK_LINUX_KERNEL_VLAN_8021Q
- tristate "802.1q VLAN support"
- help
- Select this and you will be able to create 802.1Q VLAN interfaces
- on your ethernet interfaces. 802.1Q VLAN supports almost
- everything a regular ethernet interface does, including
- firewalling, bridging, and of course IP traffic. You will need
- the 'vconfig' tool from the VLAN project in order to effectively
- use VLANs. See the VLAN web page for more information:
- <http://www.candelatech.com/~greear/vlan.html>
- config ADK_LINUX_KERNEL_INET_TUNNEL
- tristate
- config ADK_LINUX_KERNEL_NET_IP_TUNNEL
- tristate
- default n
- config ADK_LINUX_KERNEL_NET_IPIP
- tristate "IP in IP encapsulation support"
- select ADK_LINUX_KERNEL_INET_TUNNEL
- select ADK_LINUX_KERNEL_NET_IP_TUNNEL
- help
- Tunneling means encapsulating data of one protocol type within
- another protocol and sending it over a channel that understands the
- encapsulating protocol. This particular tunneling driver implements
- encapsulation of IP within IP, which sounds kind of pointless, but
- can be useful if you want to make your (or some other) machine
- appear on a different network than it physically is, or to use
- mobile-IP facilities (allowing laptops to seamlessly move between
- networks without changing their IP addresses).
- config ADK_LINUX_KERNEL_NET_IPGRE
- tristate "GRE tunnels over IP"
- select ADK_LINUX_KERNEL_NET_IPGRE_BROADCAST
- select ADK_LINUX_KERNEL_NET_IPGRE_DEMUX
- select ADK_LINUX_KERNEL_NET_IP_TUNNEL
- help
- Tunneling means encapsulating data of one protocol type within
- another protocol and sending it over a channel that understands the
- encapsulating protocol. This particular tunneling driver implements
- GRE (Generic Routing Encapsulation) and at this time allows
- encapsulating of IPv4 or IPv6 over existing IPv4 infrastructure.
- This driver is useful if the other endpoint is a Cisco router: Cisco
- likes GRE much better than the other Linux tunneling driver ("IP
- tunneling" above). In addition, GRE allows multicast redistribution
- through the tunnel.
- config ADK_LINUX_KERNEL_PPP
- tristate "PPP support"
- select ADK_LINUX_KERNEL_PPP_ASYNC
- select ADK_LINUX_KERNEL_SLHC
- select ADK_LINUX_KERNEL_CRC_CCITT
- help
- PPP (Point to Point Protocol) is a newer and better SLIP. It serves
- the same purpose: sending Internet traffic over telephone (and other
- serial) lines. Ask your access provider if they support it, because
- otherwise you can't use it; most Internet access providers these
- days support PPP rather than SLIP.
- To use PPP, you need an additional program called pppd as described
- in the PPP-HOWTO, available at
- <http://www.tldp.org/docs.html
- the version of pppd recommended in <file:Documentation/Changes>.
- The PPP option enlarges your kernel by about 16 KB.
- There are actually two versions of PPP: the traditional PPP for
- asynchronous lines, such as regular analog phone lines, and
- synchronous PPP which can be used over digital ISDN lines for
- example. If you want to use PPP over phone lines or other
- asynchronous serial lines, you need to say Y (or M) here and also to
- the next option, "PPP support for async serial ports". For PPP over
- synchronous lines, you should say Y (or M) here and to "Support
- synchronous PPP", below.
- config ADK_LINUX_KERNEL_PPP_MPPE
- tristate "PPP MPPE/MPPC module"
- depends on ADK_LINUX_KERNEL_PPP
- select ADK_LINUX_KERNEL_CRYPTO
- select ADK_LINUX_KERNEL_CRYPTO_ARC4
- select ADK_LINUX_KERNEL_CRYPTO_SHA1
- select ADK_LINUX_KERNEL_CRYPTO_ECB
- help
- Support for the MPPE Encryption protocol, as employed by the
- Microsoft Point-to-Point Tunneling Protocol.
- See http://pptpclient.sourceforge.net/ for information on
- configuring PPTP clients and servers to utilize this method.
- config ADK_LINUX_KERNEL_PPPOATM
- tristate "PPPoA (PPP over ATM) kernel support"
- depends on ADK_LINUX_KERNEL_PPP
- select ADK_LINUX_KERNEL_ATM
- help
- Support for PPP over ATM
- config ADK_LINUX_KERNEL_PPPOE
- tristate "PPPoE (PPP over Ethernet) kernel support"
- depends on ADK_LINUX_KERNEL_PPP
- help
- Support for PPP over Ethernet
- config ADK_LINUX_KERNEL_TUN
- tristate "Universal TUN/TAP driver"
- help
- Kernel support for the TUN/TAP tunneling device
- config ADK_LINUX_KERNEL_BONDING
- tristate "Bonding driver support"
- help
- Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
- Channels together. This is called 'Etherchannel' by Cisco,
- 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
- The driver supports multiple bonding modes to allow for both high
- performance and high availability operation.
- Refer to <file:Documentation/networking/bonding.txt> for more
- information.
- source target/linux/config/Config.in.sched
- source target/linux/config/Config.in.ipsec
- source target/linux/config/Config.in.ipvs
- endmenu
|