openadk/package/ipcad/patches/patch-Makefile

--- ipcad-3.7.3.orig/Makefile	2007-04-22 10:08:45.000000000 +0200
+++ ipcad-3.7.3/Makefile	2014-03-23 17:59:56.000000000 +0100
@@ -1,4 +1,163 @@
-all: bootstrap
 
-bootstrap:
-	./configure && make
+prefix= /usr
+exec_prefix= ${prefix}
+bindir= /usr/bin
+sysconfdir= /etc
+datadir= /usr/share
+
+CC= /home/wbx/hudson/toolchain_x86_64-linux-gnu/usr/bin/arm-openadk-linux-muslgnueabihf-gcc
+LDFLAGS= -L/home/wbx/hudson/target_arm_musl_eabihf/lib -L/home/wbx/hudson/target_arm_musl_eabihf/usr/lib -Wl,-O1 -Wl,-rpath -Wl,/usr/lib -Wl,-rpath-link -Wl,/home/wbx/hudson/target_arm_musl_eabihf/usr/lib -Wl,-z,relro,-z,now
+LIBS= -lpcap 
+CFLAGS= -march=armv6 -mtune=arm1176jzf-s -mfpu=vfp -mfloat-abi=hard -fwrapv -fno-ident -fhonour-copts -fomit-frame-pointer -Os -pipe -fno-unwind-tables -fno-asynchronous-unwind-tables -g3 -DHAVE_CONFIG_H -W -Wall
+CPPFLAGS=-DIPCAD_VERSION=\"3.7.3\"
+CPPFLAGS+=-DCONFIG_FILE=\"${sysconfdir}/ipcad.conf\"
+CPPFLAGS+=-DHAVE_CONFIG_H -D_REENTRANT -D_THREAD_SAFE
+CPPFLAGS+=-DPSRC_pcap -DIFST_linux
+
+YACC=bison -y
+LEX=flex
+INSTALL=/usr/bin/install -c
+
+MANROOT=/usr/share/man/man
+MAN8=${MANROOT}8
+MAN5=${MANROOT}5
+
+NROFF= groff -Tascii -mandoc
+
+PACKAGE=ipcad
+TARGETS=ipcad
+VERSION=3.7.3
+
+IPCAD_OBJS= main.o process.o pps.o disp.o storage.o usage.o cfgy.o cfglex.o cfgread.o cfgvar.o dump.o import.o nflow.o cshelly.o cslex.o csparse.o service.o rw.o servers.o opt.o pidfile.o sf_lite.o
+IPCAD_OBJS+= ifst_linux.o		# Interface statistics
+IPCAD_OBJS+= ifs_list.o			# Interface statistics
+IPCAD_OBJS+= loop-pcap.o		# Method of capturing
+IPCAD_OBJS+= loop-file.o		# Method of capturing
+IPCAD_OBJS+= loop-divert.o		# Method of capturing
+IPCAD_OBJS+= loop-dynamic.o		# Method of capturing
+IPCAD_OBJS+= loop-ulog.o loop-ipq.o	# Methods of capturing
+IPCAD_OBJS+= psrc.o psrc-pcap.o	# Initialize capturers
+IPCAD_OBJS+= psrc-ipq.o psrc-ulog.o	# Initialize capturers
+IPCAD_OBJS+= psrc-file.o		# Initialize capturers
+IPCAD_OBJS+= psrc-dynamic.o		# Initialize capturers
+IPCAD_OBJS+= psrc-divert.o		# Initialize capturers
+IPCAD_OBJS+= wrap_oclose.o		# Special file descriptors cache
+IPCAD_OBJS+= genhash.o			# General hashing
+
+all: ${TARGETS} man
+
+ipcad: ${IPCAD_OBJS}
+	${CC} ${CFLAGS} -o $@ ${IPCAD_OBJS} ${LDFLAGS} ${LIBS}
+
+.SUFFIXES:
+.SUFFIXES: .o .c .0 .8 .5
+
+.c.o:
+	${CC} ${CPPFLAGS} ${CFLAGS} -o $@ -c $<
+
+.8.0:
+	${NROFF} $< > $@
+
+.5.0:
+	${NROFF} $< > $@
+
+cfgy.h cfgy.c: cfg.y
+	${YACC} -p ipcacfg -d cfg.y
+	@mv y.tab.c cfgy.c
+	@mv y.tab.h cfgy.h
+
+cshelly.h cshelly.c: cshell.y
+	${YACC} -p CS -d cshell.y
+	@mv y.tab.c cshelly.c
+	@mv y.tab.h cshelly.h
+
+cslex.c: cslex.l
+	${LEX} -s -p -Cem -ocslex.c -PCS cslex.l
+
+cfglex.c: cfglex.l
+	${LEX} -s -p -Cem -ocfglex.c -Pipcacfg cfglex.l
+
+
+man: ipcad.8 ipcad.conf.5
+
+distdir = $(PACKAGE)-$(VERSION)
+distdir:
+	rm -rf $(distdir)
+	mkdir $(distdir)
+	cp *.c *.h $(distdir)
+	cp ipcad.8 ipcad.conf.5 $(distdir)
+	cp *.y *.l $(distdir)
+	cp *.in configure install-sh $(distdir)
+	cp ipcad.conf.default $(distdir)
+	cp ipcad.conf.simple $(distdir)
+	cp ipcad.spec.in $(distdir)
+	cp Makefile.in Makefile $(distdir)
+	cp ChangeLog INSTALL README TODO BUGS AUTHORS COPYING FAQ $(distdir)
+	cd $(distdir) && make distclean
+
+dist: distdir
+	tar chof - $(distdir) | GZIP="--best" gzip -c > $(distdir).tar.gz
+	rm -rf $(distdir)
+
+clean:
+	rm -f *.o ${TARGETS} *.core 1
+	rm -f *.0
+
+distclean: clean
+	rm -f config.h
+	rm -f config.cache config.log config.status
+	rm -f Makefile
+	rm -f $(distdir).tar.gz
+	rm -f ipcad.spec
+	(echo "all: bootstrap"; echo; echo "bootstrap:"; \
+		echo "	./configure && make") > Makefile
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use; it"
+	@echo "deletes files that may need special tools to rebuild."
+	rm -f Makefile
+	rm -f *.tab.* cfgy.? *lex.c
+	rm -f config.h.in configure
+
+install: all install-bin install-conf
+
+install-bin:
+	@${INSTALL} -d $(DESTDIR)${bindir}
+	${INSTALL} ipcad $(DESTDIR)${bindir}
+
+install-man: man
+	${INSTALL} -m 444 ipcad.8 $(DESTDIR)${MAN8}/ipcad.8
+	${INSTALL} -m 444 ipcad.conf.5 $(DESTDIR)${MAN5}/ipcad.conf.5
+
+install-conf:
+	@${INSTALL} -d $(DESTDIR)${sysconfdir}
+	${INSTALL} -m 644 ipcad.conf.simple $(DESTDIR)${sysconfdir}/ipcad.conf.simple
+	-@diff ${sysconfdir}/ipcad.conf					\
+	      ${sysconfdir}/ipcad.conf.default >/dev/null 2>&1;		\
+	if [ "$$?" -eq 0 ] || [ ! -f ${sysconfdir}/ipcad.conf ]; then	\
+	echo ${INSTALL} -m 644 ipcad.conf.default $(DESTDIR)${sysconfdir}/ipcad.conf.default; \
+	${INSTALL} -m 644 ipcad.conf.default $(DESTDIR)${sysconfdir}/ipcad.conf.default; \
+	echo ${INSTALL} -m 644 ipcad.conf.default $(DESTDIR)${sysconfdir}/ipcad.conf;	\
+	${INSTALL} -m 644 ipcad.conf.default $(DESTDIR)${sysconfdir}/ipcad.conf;	\
+	echo "**********************************************";		\
+	echo "* Please customize ${sysconfdir}/ipcad.conf *";		\
+	echo "**********************************************";		\
+	else								\
+	echo ${INSTALL} -m 644 ipcad.conf.default $(DESTDIR)${sysconfdir}/ipcad.conf.default; \
+	${INSTALL} -m 644 ipcad.conf.default $(DESTDIR)${sysconfdir}/ipcad.conf.default; \
+	echo "*********************************************";		\
+	echo "* Updated ${sysconfdir}/ipcad.conf.default *";		\
+	echo "*********************************************";		\
+	fi
+	@echo ""
+	@echo "Now you might want to 'make install-man'"
+	@echo ""
+
+
+uninstall:
+	rm -f ${bindir}/ipcad
+	rm -f ${sysconfdir}/ipcad.conf.default
+	rm -f ${sysconfdir}/ipcad.conf.simple
+	rm -f ${MAN8}/ipcad.8
+	rm -f ${MAN5}/ipcad.conf.5
+