openadk/target/Config.in

# This file is part of the OpenADK project. OpenADK is copyrighted
# material, please see the LICENCE file in the top-level directory.

# mark broken devices
config ADK_BROKEN
	bool

config ADK_TOOLCHAIN_ONLY
	bool

config ADK_DEVICE_NO_FPU
	bool

config ADK_EABI
	bool

config ADK_LINUX_64
	bool

config ADK_NATIVE
	tristate

config ADK_alix1c
	tristate

config ADK_qemu_x86
	tristate

config ADK_qemu_mips
	tristate

config ADK_qemu_mipsel
	tristate

config ADK_qemu_mips64
	tristate

config ADK_qemu_mips64el
	tristate

config ADK_qemu_cris
	tristate

config ADK_rb532
	tristate

config ADK_rb411
	tristate

config ADK_rb433
	tristate

config ADK_zaurus
	tristate

config ADK_tomtom
	tristate

config ADK_foxboard
	tristate

config ADK_lemote
	tristate

config ADK_rescue_x86
	tristate

config ADK_rescue_x86_64
	tristate

config ADK_rescue_mips
	tristate

config ADK_rescue_mipsel
	tristate

config ADK_wag54g
	tristate

config ADK_shuttle
	tristate

config ADK_DEVICE
	string
	default "alix1c"  if ADK_alix1c
	default "qemu-x86"  if ADK_qemu_x86
	default "qemu-mips"  if ADK_qemu_mips
	default "qemu-mipsel"  if ADK_qemu_mipsel
	default "qemu-mips64"  if ADK_qemu_mips64
	default "qemu-mips64el"  if ADK_qemu_mips64el
	default "qemu-cris"  if ADK_qemu_cris
	default "foxboard"  if ADK_foxboard
	default "native"  if ADK_NATIVE
	default "rb532"  if ADK_rb532
	default "rb411"  if ADK_rb411
	default "rb433"  if ADK_rb433
	default "zaurus"  if ADK_arm
	default "lemote"  if ADK_lemote
	default "wag54g"  if ADK_wag54g
	default "rescue-x86"  if ADK_rescue_x86
	default "rescue-x86_64"  if ADK_rescue_x86_64
	default "rescue-mips"  if ADK_rescue_mips
	default "rescue-mipsel"  if ADK_rescue_mipsel
	default "shuttle"  if ADK_shuttle
	default "tomtom"  if ADK_tomtom

menu "Target system"

choice
prompt "Embedded Device"
default ADK_LINUX_NATIVE

config ADK_LINUX_NATIVE
	bool "Native platform"
	select ADK_NATIVE
	help
	  Make a native build. Use host tools.
	  No toolchain will be created.

config ADK_LINUX_X86_ALIX1C
	bool "PC Engines Alix1C"
	select ADK_alix1c
	select ADK_KERNEL_SCSI
	select ADK_KERNEL_EXT2_FS
	select ADK_KERNEL_NET_PCI
	select ADK_KERNEL_NETDEVICES
	select ADK_KERNEL_NET_ETHERNET
	select ADK_KERNEL_MII
	select BUSYBOX_HWCLOCK
	help
	  http://www.pcengines.ch/

config ADK_LINUX_CRIS_FOXBOARD
	bool "Foxboard (ETRAX LX100)"
	select ADK_foxboard
	select ADK_PACKAGE_KMOD_USB_CONTROLLER
	help
	  Foxboard support

config ADK_LINUX_MIPS64_LEMOTE
	bool "Lemote Subnotebook Yeeloong"
	select ADK_lemote
	select ADK_LINUX_64
	select ADK_KERNEL_BLK_DEV_SD
	select ADK_KERNEL_INPUT_KEYBOARD
	select ADK_KERNEL_NETDEVICES
	select ADK_KERNEL_NET_PCI
	select ADK_KERNEL_NET_ETHERNET
	select ADK_KERNEL_MII
	select ADK_KERNEL_SWAP
	help
	  Lemote Subnotebook

config ADK_LINUX_MIKROTIK
	bool "Mikrotik Routerboards"
	help
	 Support for Mikrotik Routerboards

config ADK_LINUX_MIPS_WAG54G
	bool "Linksys WAG54G"
	select ADK_KERNEL_NETDEVICES
	select ADK_KERNEL_NET_PCI
	select ADK_KERNEL_NET_ETHERNET
	select ADK_KERNEL_MII
	select ADK_wag54g
	help
	  Linksys WAG54G DSL router with Wireless
	  TI AR7 platform

config ADK_LINUX_ARM_TOMTOM
	bool "TomTom Applications"
	select ADK_tomtom
	select ADK_DEVICE_NO_FPU
	select ADK_EABI
	select ADK_TOOLCHAIN_ONLY
	help
	 Support for TomTom Rider 2 (or others).
	 Just toolchain support to cross-compile your own
	 applications.


#config ADK_LINUX_XSCALE_ZAURUS
#	bool "Zaurus SL-C3200"
#	depends on ADK_BROKEN
#	select ADK_zaurus
#	select ADK_DEVICE_NO_FPU
#	help
#	 Support for Sharp Zaurus SL-C3200 (aka Terrier)

config ADK_LINUX_RESCUE
	bool "Minimal Linux Rescuesystem"
	select ADK_KERNEL_INPUT_KEYBOARD
	help
	 Rescuesystem with can be used to Boot from Disk or USB stick.

config ADK_LINUX_QEMU
	bool "Qemu Emulator"
	select ADK_KERNEL_NET_PCI
	select ADK_KERNEL_NETDEVICES
	select ADK_KERNEL_NET_ETHERNET
	help
	 Support for Qemu Emulator

config ADK_LINUX_X86_64_SHUTTLE
	bool "Shuttle PC"
	select ADK_shuttle
	select ADK_KERNEL_INPUT_KEYBOARD
	select ADK_KERNEL_NETDEVICES
	select ADK_KERNEL_NET_PCI
	select ADK_KERNEL_NET_ETHERNET
	select ADK_KERNEL_SATA_AHCI if ADK_TARGET_ROOTFS_ARCHIVE
	select ADK_KERNEL_BLK_DEV_MD if ADK_TARGET_ROOTFS_ARCHIVE
	select ADK_KERNEL_MD_RAID0 if ADK_TARGET_ROOTFS_ARCHIVE
	select ADK_KERNEL_MD_RAID1 if ADK_TARGET_ROOTFS_ARCHIVE
	select ADK_KPACKAGE_KMOD_SATA_AHCI if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
	select ADK_KPACKAGE_KMOD_BLK_DEV_MD if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
	select ADK_KPACKAGE_KMOD_MD_RAID0 if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
	select ADK_KPACKAGE_KMOD_MD_RAID1 if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
	help
	  Support for a nice and fast shuttle xpc with AMD quad-core CPU.
	  Known as OpenADK multi operating system buildserver.

endchoice

choice
prompt "Architecture"
depends on ADK_LINUX_RESCUE

config ADK_LINUX_X86_64_RESCUE
	bool "x86_64"
	select ADK_rescue_x86_64
	help
	 X86 architecture.

config ADK_LINUX_X86_RESCUE
	bool "x86"
	select ADK_rescue_x86
	help
	 X86 architecture.

config ADK_LINUX_MIPSEL_RESCUE
	bool "mips (little endian)"
	select ADK_rescue_mipsel
	help
	 MIPS LE architecture.

config ADK_LINUX_MIPS_RESCUE
	bool "mips (big endian)"
	select ADK_rescue_mips
	help
	 MIPS BE architecture.

endchoice

choice
prompt "Architecture"
depends on ADK_LINUX_QEMU

config ADK_LINUX_X86_QEMU
	bool "x86"
	select ADK_qemu_x86
	select ADK_KPACKAGE_KMOD_NE2K_PCI
	select ADK_KERNEL_INPUT_KEYBOARD
	help
	 Qemu support for x86 architecture.

config ADK_LINUX_MIPS_QEMU
	bool "mips (big endian)"
	select ADK_qemu_mips
	help
	 Qemu support for MIPS BE architecture.

config ADK_LINUX_MIPSEL_QEMU
	bool "mipsel (little endian)"
	select ADK_qemu_mipsel
	help
	 Qemu support for MIPS LE architecture.

config ADK_LINUX_MIPS64_QEMU
	bool "mips64 (big endian)"
	select ADK_qemu_mips64
	select ADK_LINUX_64
	help
	 Qemu support for MIPS64 BE architecture.

config ADK_LINUX_MIPS64EL_QEMU
	bool "mips64 (little endian)"
	select ADK_qemu_mips64el
	select ADK_LINUX_64
	help
	 Qemu support for MIPS64 LE architecture.

config ADK_LINUX_CRIS_QEMU
	bool "cris"
	select ADK_qemu_cris
#	select ADK_BROKEN
	help
	 Qemu support for CRISv32 architecture.

endchoice

choice
prompt "Routerboard model"
default ADK_LINUX_MIPS_RB433
depends on ADK_LINUX_MIKROTIK

config ADK_LINUX_MIPS_RB411
	bool "Mikrotik Routerboard 411"
	select ADK_rb411
	select ADK_KERNEL_NETDEVICES
	select ADK_KERNEL_NET_PCI
	select ADK_KERNEL_NETDEV_1000
	select ADK_KERNEL_NET_ETHERNET
	help
	 Support for Mikrotik RB411.

config ADK_LINUX_MIPS_RB433
	bool "Mikrotik Routerboard 433"
	select ADK_rb433
	select ADK_KERNEL_NETDEVICES
	select ADK_KERNEL_NET_PCI
	select ADK_KERNEL_NETDEV_1000
	select ADK_KERNEL_NET_ETHERNET
	help
	 Support for Mikrotik RB433.

config ADK_LINUX_MIPS_RB532
	bool "Mikrotik Routerboard 532"
	select ADK_rb532
	select ADK_KERNEL_NETDEVICES
	select ADK_KERNEL_NET_PCI
	select ADK_KERNEL_NET_ETHERNET
	select ADK_KERNEL_MII
	help
	 Support for Mikrotik RB532.
endchoice

choice
prompt "Device model"
default ADK_LINUX_CRIS_FOXBOARD_CLASSIC
depends on ADK_LINUX_CRIS_FOXBOARD

config ADK_LINUX_CRIS_FOXBOARD_CLASSIC
	bool "Foxboard classic (4x16)"
	help
	  Foxboard classic with red board.
	  (4 MB flash size and 16 MB RAM)

config ADK_LINUX_CRIS_FOXBOARD_LX
	bool "Foxboard LX (8x32)"
	help
	  Latest Foxboard with green board.
	  (8 MB flash size and 32 MB RAM)

endchoice

source "target/linux/config/Config.in.kernel"

choice 
prompt "Target C library"
depends on ! ADK_NATIVE
config ADK_TARGET_LIB_UCLIBC
	bool "uClibc embedded C library"
	# broken, because of 16kB pagesize
	#depends on !ADK_LINUX_MIPS64_LEMOTE
	help
 	 http://uclibc.org

config ADK_TARGET_LIB_EGLIBC
	bool "Embedded GNU C library"
	depends on ADK_LINUX_X86_QEMU || \
		ADK_LINUX_MIPS_QEMU || \
		ADK_LINUX_MIPS64_QEMU || \
		ADK_LINUX_MIPSEL_QEMU || \
		ADK_LINUX_MIPS64EL_QEMU || \
		ADK_LINUX_X86_ALIX1C || \
		ADK_LINUX_MIPS_RB411 || \
		ADK_LINUX_MIPS_RB532 || \
		ADK_LINUX_RESCUE || \
		ADK_LINUX_X86_64_SHUTTLE || \
		ADK_LINUX_ARM_TOMTOM || \
		ADK_LINUX_MIPS64_LEMOTE
	help
	 http://www.eglibc.org

config ADK_TARGET_LIB_GLIBC
	bool "GNU C library"
	depends on ADK_LINUX_X86_QEMU || \
		ADK_LINUX_MIPS_QEMU || \
		ADK_LINUX_MIPS64_QEMU || \
		ADK_LINUX_MIPSEL_QEMU || \
		ADK_LINUX_MIPS64EL_QEMU || \
		ADK_LINUX_X86_ALIX1C || \
		ADK_LINUX_MIPS_RB411 || \
		ADK_LINUX_RESCUE || \
		ADK_LINUX_X86_64_SHUTTLE || \
		ADK_LINUX_ARM_TOMTOM || \
		ADK_LINUX_MIPS64_LEMOTE
	help
	 http://www.gnu.org/libc

endchoice

config ADK_TARGET_SUFFIX
	string
	default "gnueabi" if (ADK_TARGET_LIB_GLIBC || ADK_TARGET_LIB_EGLIBC) && ADK_EABI
	default "gnu" if (ADK_TARGET_LIB_GLIBC || ADK_TARGET_LIB_EGLIBC) && !ADK_EABI
	default "uclibcgnueabi" if ADK_TARGET_LIB_UCLIBC && ADK_EABI
	default "uclibc" if ADK_TARGET_LIB_UCLIBC && !ADK_EABI


choice
prompt "Target Firmware type"
	depends on !ADK_TOOLCHAIN_ONLY
	default ADK_TARGET_ROOTFS_EXT2_CF

config ADK_TARGET_ROOTFS_INITRAMFS
	bool "initramfs filesystem"
	depends on ADK_LINUX_X86_QEMU || \
		ADK_LINUX_CRIS_QEMU || \
		ADK_LINUX_MIPS_QEMU || \
		ADK_LINUX_MIPSEL_QEMU || \
		ADK_LINUX_MIPS64_QEMU || \
		ADK_LINUX_MIPS64EL_QEMU || \
		ADK_LINUX_NATIVE || \
		ADK_LINUX_RESCUE
	select ADK_KERNEL_BLK_DEV_INITRD
	help
	  create an read-only initramfs system.

config ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
	bool "initramfs filesystem included into kernel image"
	select ADK_LINUX_INITRAMFS_BUILTIN
	depends on ADK_LINUX_X86_QEMU || \
		ADK_LINUX_CRIS_QEMU || \
		ADK_LINUX_MIPS_QEMU || \
		ADK_LINUX_MIPSEL_QEMU || \
		ADK_LINUX_MIPS64_QEMU || \
		ADK_LINUX_MIPS64EL_QEMU || \
		ADK_LINUX_X86_64_SHUTTLE || \
		ADK_LINUX_NATIVE || \
		ADK_LINUX_RESCUE
	help
	  create an read-only initramfs system.

config ADK_TARGET_ROOTFS_SQUASHFS
	bool "squashfs read-only root filesystem"
	depends on ADK_LINUX_CRIS_FOXBOARD || \
		ADK_LINUX_MIPS_WAG54G
	help
	  highly compressed read-only filesystem for flash.

config ADK_TARGET_ROOTFS_YAFFS
	bool "YAFFS2 rootfilesystem (NAND)"
	depends on ADK_LINUX_MIPS_RB532 || \
		ADK_LINUX_MIPS_RB433 || \
		ADK_LINUX_MIPS_RB411
	help
	  Root filesystem on NAND.

config ADK_TARGET_ROOTFS_NFSROOT
	bool "NFS root"
	depends on ADK_LINUX_CRIS_FOXBOARD || \
		ADK_LINUX_X86_ALIX1C || \
		ADK_LINUX_MIPS_RB532 || \
		ADK_LINUX_MIPS_RB433 || \
		ADK_LINUX_MIPS_RB411 || \
		ADK_LINUX_MIPS_WAG54G || \
		ADK_LINUX_MIPS64_LEMOTE
	select ADK_KERNEL_NFS_FS
	select ADK_KERNEL_NFS_V3
	select ADK_KERNEL_ROOT_NFS
	select ADK_KERNEL_NFS_COMMON
	select ADK_KERNEL_IP_PNP
	select ADK_KERNEL_IP_PNP_DHCP
	help
	  Root filesystem mounted via NFS. (DHCP)

config ADK_TARGET_ROOTFS_EXT2_CF
	bool "read-write filesystem for compact flash (ext2)"
	depends on ADK_LINUX_X86_ALIX1C || ADK_LINUX_MIPS_RB532
	select ADK_KERNEL_EXT2_FS
	select ADK_KERNEL_SCSI
	select ADK_KERNEL_BLK_DEV_SD
	help
	  Use this option if you have a compact flash
	  inside your hardware and want to boot from it.

config ADK_TARGET_ROOTFS_ARCHIVE
	bool "Archive usable for different filesystems"
	depends on ADK_LINUX_QEMU || \
		ADK_LINUX_XSCALE_ZAURUS || \
		ADK_LINUX_MIPS64_LEMOTE || \
		ADK_LINUX_X86_64_SHUTTLE
	help
	  Use this option if your root filesystem is ext2/ext3/ext4/xfs.

config ADK_TARGET_ROOTFS_ENCRYPTED
	bool "Encrypted read-write root filesystem"
	depends on ADK_LINUX_MIPS64_LEMOTE
	select ADK_LINUX_INITRAMFS_BUILTIN
	select ADK_PACKAGE_CRYPTINIT
	select ADK_KERNEL_BLK_DEV_DM
	select ADK_KERNEL_DM_CRYPT
	select ADK_KERNEL_CRYPTO_AES
	select ADK_KERNEL_CRYPTO_CBC
	select ADK_KERNEL_CRYPTO_SHA256
	select ADK_KERNEL_XFS_FS
	help
	  Use this option if you want an encrypted rootfs.
	  Default is XFS filesystem. Use following commands to setup 
	  your hard disk, after booting via NFS or USB.
	  Create at least three partitions with fdisk
	  /dev/sda1 (ext2)
          /dev/sda2 (encrypted root)
          /dev/sda3 (swap)

	  mkdir /mnt/{boot,root}
	  cryptsetup luksFormat /dev/sda2 
	  cryptsetup luksOpen /dev/sda2 root
	  cryptsetup luksFormat /dev/sda3
	  cryptsetup luksOpen /dev/sda3 swap
	  mkswap /dev/mapper/swap
          mkfs.xfs /dev/mapper/root
          mount /dev/mapper/root /mnt/root
          tar xzvf lemote-mips-encryptedroot.tar.gz -C /mnt/root
          mount /dev/sda1 /mnt/boot
	  mkdir /mnt/boot/boot
	  cp lemote-mips-kernel /mnt/boot/boot
	  mv /mnt/root/boot/boot.cfg /mnt/boot/boot
	  cd /mnt/root ; mknod -m 644 console c 5 1

endchoice

choice
prompt "Root filesystem type"
	depends on ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
	default ADK_TARGET_ROOT_XFS

config ADK_TARGET_ROOT_XFS_MOD
	boolean
	prompt "XFS filesystem"
	select ADK_KPACKAGE_KMOD_XFS_FS
	select ADK_PACKAGE_XFSPROGS
	help
	  Select XFS filesystem kernel module and filesystem utilities.

config ADK_TARGET_ROOT_EXT2_MOD
	boolean
	prompt "EXT2 filesystem"
	select ADK_KPACKAGE_KMOD_EXT2_FS
	select ADK_PACKAGE_E2FSPROGS
	help
	  Select EXT2 filesystem kernel module and filesystem utilities.

config ADK_TARGET_ROOT_EXT3_MOD
	boolean
	prompt "EXT3 filesystem"
	select ADK_KPACKAGE_KMOD_EXT3_FS
	select ADK_PACKAGE_E2FSPROGS
	help
	  Select EXT3 filesystem kernel module and filesystem utilities.

config ADK_TARGET_ROOT_EXT4_MOD
	boolean
	prompt "EXT4 filesystem"
	select ADK_KPACKAGE_KMOD_EXT4_FS
	select ADK_PACKAGE_E2FSPROGS
	help
	  Select EXT4 filesystem kernel module and filesystem utilities.

endchoice

choice
prompt "Root filesystem type"
	depends on ADK_TARGET_ROOTFS_ARCHIVE
	default ADK_TARGET_ROOT_XFS

config ADK_TARGET_ROOT_XFS
	boolean
	prompt "XFS filesystem"
	select ADK_KERNEL_XFS_FS
	help
	  Compile XFS filesystem into kernel and use it as root filesystem.

config ADK_TARGET_ROOT_EXT2
	boolean
	prompt "EXT2 filesystem"
	select ADK_KERNEL_EXT2_FS
	help
	  Compile EXT2 filesystem into kernel and use it as root filesystem.

config ADK_TARGET_ROOT_EXT3
	boolean
	prompt "EXT3 filesystem"
	select ADK_KERNEL_EXT3_FS
	help
	  Compile EXT3 filesystem into kernel and use it as root filesystem.

config ADK_TARGET_ROOT_EXT4
	boolean
	prompt "EXT4 filesystem"
	select ADK_KERNEL_EXT4_FS
	help
	  Compile EXT4 filesystem into kernel and use it as root filesystem.

endchoice

#config ADK_SSP
#	bool "Enable Stack Smashing Protection"
#	default n
#	depends on ADK_LINUX_X86_ALIX1C || \
#		ADK_LINUX_CRIS_FOXBOARD
#	help
#	  Enable Stack Smashing Protection

config ADK_CXX
	bool "Enable C++ support"
	default n
	help
	  Enable C++ Compiler and Libraries

config ADK_DEBUG
	bool "Enable debug support"
	default n
	help
	  All packages and libc will be compiled and packaged with debug information.
	  Mostly useful for NFS root or big USB/CF disk setups.

config ADK_IPV6
	bool "Enable IPv6 support"
	default n
	select ADK_KPACKAGE_KMOD_IPV6
	select BUSYBOX_FEATURE_IPV6
	select BUSYBOX_FEATURE_IFUPDOWN_IPV6
	select BUSYBOX_PING6
	help
	  Enable basic IPv6 support (kmod-ipv6) and
	  make the IPv6 support options in packages visible.

config ADK_X11
	bool "Enable X.org/X11 support"
	default n
	help
	  Enable Xorg/X11 server and applications in menu.
	  Try to compile other packages with X11 support. 
	  (f.e. mplayer)


endmenu