Config.in.usb 11 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303
  1. menu "USB support"
  2. depends on ADK_TARGET_WITH_USB
  3. config ADK_KERNEL_USB_LIBUSUAL
  4. tristate
  5. default n
  6. config ADK_KERNEL_USB_SERIAL
  7. boolean
  8. default n
  9. config ADK_KERNEL_USB
  10. boolean
  11. default n
  12. config ADK_KERNEL_USB_STORAGE
  13. boolean
  14. default n
  15. config ADK_KERNEL_USB_EHCI_HCD
  16. boolean
  17. default n
  18. config ADK_KERNEL_USB_UHCI_HCD
  19. boolean
  20. default n
  21. config ADK_KPACKAGE_KMOD_USB
  22. prompt "kmod-usb......................... USB support"
  23. tristate
  24. default y if ADK_HARDWARE_ALIX1C
  25. default y if ADK_HARDWARE_ALIX2D2
  26. default y if ADK_HARDWARE_ALIX2D13
  27. default y if ADK_HARDWARE_IBM_X40
  28. default n
  29. depends on !(ADK_LINUX_CRIS_FOXBOARD || ADK_LINUX_ARM_FOXG20 || ADK_KERNEL_USB)
  30. select ADK_KERNEL_NLS
  31. help
  32. Universal Serial Bus (USB) is a specification for a serial bus
  33. subsystem which offers higher speeds and more features than the
  34. traditional PC serial port. The bus supplies power to peripherals
  35. and allows for hot swapping. Up to 127 USB peripherals can be
  36. connected to a single USB host in a tree structure.
  37. The USB host is the root of the tree, the peripherals are the
  38. leaves and the inner nodes are special USB devices called hubs.
  39. Most PCs now have USB host ports, used to connect peripherals
  40. such as scanners, keyboards, mice, modems, cameras, disks,
  41. flash memory, network links, and printers to the PC.
  42. Say Y here if your computer has a host-side USB port and you want
  43. to use USB devices. You then need to say Y to at least one of the
  44. Host Controller Driver (HCD) options below. Choose a USB 1.1
  45. controller, such as "UHCI HCD support" or "OHCI HCD support",
  46. and "EHCI HCD (USB 2.0) support" except for older systems that
  47. do not have USB 2.0 support. It doesn't normally hurt to select
  48. them all if you are not certain.
  49. If your system has a device-side USB port, used in the peripheral
  50. side of the USB protocol, see the "USB Gadget" framework instead.
  51. After choosing your HCD, then select drivers for the USB peripherals
  52. you'll be using. You may want to check out the information provided
  53. in <file:Documentation/usb/> and especially the links given in
  54. <file:Documentation/usb/usb-help.txt>.
  55. config ADK_KPACKAGE_KMOD_USB_UHCI_HCD
  56. prompt "kmod-usb-uhci................... Support for UHCI controllers"
  57. tristate
  58. depends on ADK_KPACKAGE_KMOD_USB
  59. depends on !(ADK_LINUX_CRIS_FOXBOARD || ADK_KERNEL_USB_UHCI_HCD)
  60. select ADK_PACKAGE_KMOD_USB_CONTROLLER
  61. help
  62. The Universal Host Controller Interface is a standard by Intel for
  63. accessing the USB hardware in the PC (which is also called the USB
  64. host controller). If your USB host controller conforms to this
  65. standard, you may want to say Y, but see below. All recent boards
  66. with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
  67. i810, i820) conform to this standard. Also all VIA PCI chipsets
  68. (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
  69. 133). If unsure, say Y.
  70. config ADK_KPACKAGE_KMOD_USB_OHCI_HCD
  71. prompt "kmod-usb-ohci................... Support for OHCI controllers"
  72. tristate
  73. default y if ADK_HARDWARE_ALIX1C
  74. default y if ADK_HARDWARE_ALIX2D2
  75. default y if ADK_HARDWARE_ALIX2D13
  76. default y if ADK_HARDWARE_IBM_X40
  77. default n
  78. depends on !ADK_LINUX_CRIS_FOXBOARD
  79. depends on ADK_KPACKAGE_KMOD_USB
  80. select ADK_PACKAGE_KMOD_USB_CONTROLLER
  81. help
  82. The Open Host Controller Interface (OHCI) is a standard for accessing
  83. USB 1.1 host controller hardware. It does more in hardware than Intel's
  84. UHCI specification. If your USB host controller follows the OHCI spec,
  85. say Y. On most non-x86 systems, and on x86 hardware that's not using a
  86. USB controller from Intel or VIA, this is appropriate. If your host
  87. controller doesn't use PCI, this is probably appropriate. For a PCI
  88. based system where you're not sure, the "lspci -v" entry will list the
  89. right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
  90. config ADK_KPACKAGE_KMOD_USB_ISP116X_HCD
  91. prompt "kmod-usb-isp116x................ ISP116X HCD support"
  92. tristate
  93. default n
  94. depends on !(ADK_LINUX_CRIS_FOXBOARD || ADK_LINUX_ARM_FOXG20)
  95. depends on ADK_KPACKAGE_KMOD_USB
  96. select ADK_PACKAGE_KMOD_USB_CONTROLLER
  97. help
  98. The ISP1160 and ISP1161 chips are USB host controllers. Enable this
  99. option if your board has this chip. If unsure, say N.
  100. This driver does not support isochronous transfers.
  101. config ADK_KPACKAGE_KMOD_USB_SL811_HCD
  102. prompt "kmod-usb-sl811.................. SL811HS HCD support"
  103. tristate
  104. default n
  105. depends on !(ADK_LINUX_CRIS_FOXBOARD || ADK_LINUX_ARM_FOXG20)
  106. depends on ADK_KPACKAGE_KMOD_USB
  107. select ADK_PACKAGE_KMOD_USB_CONTROLLER
  108. help
  109. The SL811HS is a single-port USB controller that supports either
  110. host side or peripheral side roles. Enable this option if your
  111. board has this chip, and you want to use it as a host controller.
  112. If unsure, say N.
  113. config ADK_KPACKAGE_KMOD_USB_EHCI_HCD
  114. prompt "kmod-usb-ehci................... Support for USB 2.0 controllers"
  115. tristate
  116. depends on !(ADK_LINUX_CRIS_FOXBOARD || ADK_KERNEL_USB_EHCI_HCD)
  117. default y if ADK_HARDWARE_ALIX1C
  118. default y if ADK_HARDWARE_ALIX2D2
  119. default y if ADK_HARDWARE_ALIX2D13
  120. default y if ADK_HARDWARE_IBM_X40
  121. default n
  122. depends on ADK_KPACKAGE_KMOD_USB
  123. select ADK_PACKAGE_KMOD_USB_CONTROLLER
  124. help
  125. The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
  126. "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
  127. If your USB host controller supports USB 2.0, you will likely want to
  128. configure this Host Controller Driver. At the time of this writing,
  129. the primary implementation of EHCI is a chip from NEC, widely available
  130. in add-on PCI cards, but implementations are in the works from other
  131. vendors including Intel and Philips. Motherboard support is appearing.
  132. EHCI controllers are packaged with "companion" host controllers (OHCI
  133. or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
  134. will connect to EHCI if the device is high speed, otherwise they
  135. connect to a companion controller. If you configure EHCI, you should
  136. probably configure the OHCI (for NEC and some other vendors) USB Host
  137. Controller Driver or UHCI (for Via motherboards) Host Controller
  138. Driver too.
  139. You may want to read <file:Documentation/usb/ehci.txt>.
  140. config ADK_PACKAGE_KMOD_USB_CONTROLLER
  141. tristate
  142. depends on ADK_KPACKAGE_KMOD_USB_UHCI_HCD || ADK_KPACKAGE_KMOD_USB_OHCI_HCD || ADK_KPACKAGE_KMOD_EHCI_HCD || ADK_LINUX_CRIS_FOXBOARD || ADK_LINUX_ARM_FOXG20
  143. default n
  144. config ADK_KPACKAGE_KMOD_USB_ACM
  145. prompt "kmod-usb-acm...................... Support for USB modems/isdn controllers"
  146. tristate
  147. default n
  148. depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
  149. config ADK_KPACKAGE_KMOD_USB_PEGASUS
  150. prompt "kmod-usb-pegasus.................. Support for USB Pegasus"
  151. tristate
  152. default n
  153. depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
  154. config ADK_KPACKAGE_KMOD_USB_HSO
  155. prompt "kmod-usb-hso...................... Support for USB HSO devices"
  156. tristate
  157. select ADK_KERNEL_RFKILL
  158. select ADK_KPACKAGE_KMOD_USB_STORAGE
  159. default n
  160. depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
  161. config ADK_KPACKAGE_KMOD_USB_PRINTER
  162. prompt "kmod-usb-printer.................. Support for USB printers"
  163. tristate
  164. default n
  165. depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
  166. config ADK_KPACKAGE_KMOD_USB_SERIAL
  167. prompt "kmod-usb-serial................... Support for USB-to-serial converters"
  168. tristate
  169. default n
  170. depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
  171. help
  172. Say Y here if you have a USB device that provides normal serial
  173. ports, or acts like a serial device, and you want to connect it to
  174. your USB bus.
  175. Please read <file:Documentation/usb/usb-serial.txt> for more
  176. information on the specifics of the different devices that are
  177. supported, and on how to use them.
  178. config ADK_KPACKAGE_KMOD_USB_SERIAL_BELKIN
  179. prompt "kmod-usb-serial-belkin.......... Support for Belkin USB-to-serial converters"
  180. tristate
  181. default n
  182. depends on ADK_KPACKAGE_KMOD_USB_SERIAL
  183. help
  184. Say Y here if you want to use a Belkin USB Serial single port
  185. adaptor (F5U103 is one of the model numbers) or the Peracom single
  186. port USB to serial adapter.
  187. config ADK_KPACKAGE_KMOD_USB_SERIAL_FTDI_SIO
  188. prompt "kmod-usb-serial-ftdi............ Support for FTDI USB-to-serial converter"
  189. tristate
  190. default n
  191. depends on ADK_KPACKAGE_KMOD_USB_SERIAL
  192. help
  193. Say Y here if you want to use a FTDI SIO single port USB to serial
  194. converter device. The implementation I have is called the USC-1000.
  195. This driver has also be tested with the 245 and 232 devices.
  196. See <http://ftdi-usb-sio.sourceforge.net/> for more
  197. information on this driver and the device.
  198. config ADK_KPACKAGE_KMOD_USB_SERIAL_MCT_U232
  199. prompt "kmod-usb-serial-mct-u232........ Support for Magic Control Technology USB-to-Serial converters"
  200. tristate
  201. default n
  202. depends on ADK_KPACKAGE_KMOD_USB_SERIAL
  203. help
  204. Say Y here if you want to use a USB Serial single port adapter from
  205. Magic Control Technology Corp. (U232 is one of the model numbers).
  206. This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
  207. BAY, Belkin F5U109, and Belkin F5U409 devices.
  208. config ADK_KPACKAGE_KMOD_USB_SERIAL_PL2303
  209. prompt "kmod-usb-serial-pl2303.......... Support for Prolific PL2303 USB-to-Serial converters"
  210. tristate
  211. default n
  212. depends on ADK_KPACKAGE_KMOD_USB_SERIAL
  213. help
  214. Say Y here if you want to use the PL2303 USB Serial single port
  215. adapter from Prolific.
  216. config ADK_KPACKAGE_KMOD_USB_SERIAL_VISOR
  217. prompt "kmod-usb-serial-visor........... Support for Handspring Visor / Palm m50x / Sony Clie Driver"
  218. tristate
  219. default n
  220. depends on ADK_KPACKAGE_KMOD_USB_SERIAL
  221. help
  222. Say Y here if you want to connect to your HandSpring Visor, Palm
  223. m500 or m505 through its USB docking station. See
  224. <http://usbvisor.sourceforge.net/> for more information on using this
  225. driver.
  226. config ADK_KPACKAGE_KMOD_USB_STORAGE
  227. prompt "kmod-usb-storage.................. Support for USB storage devices"
  228. tristate
  229. default n
  230. depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
  231. depends on !ADK_KERNEL_USB_STORAGE
  232. select ADK_KPACKAGE_KMOD_SCSI if !ADK_KERNEL_SCSI
  233. select ADK_KPACKAGE_KMOD_BLK_DEV_SD if !ADK_KERNEL_SCSI
  234. config ADK_KPACKAGE_KMOD_USB_ATM
  235. prompt "kmod-usb-atm...................... Support for USB ATM devices"
  236. tristate
  237. default n
  238. depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
  239. config ADK_KPACKAGE_KMOD_USB_ATM_SPEEDTOUCH
  240. prompt "kmod-usb-atm-speedtouch......... Support for USB Speedtouch ADSL modem"
  241. tristate
  242. default n
  243. depends on ADK_KPACKAGE_KMOD_USB_ATM
  244. config ADK_KPACKAGE_KMOD_USB_USBNET
  245. prompt "kmod-usb-usbnet................... Multi-purpose USB Networking Framework"
  246. tristate
  247. default n
  248. depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
  249. config ADK_KPACKAGE_KMOD_SND_USB_AUDIO
  250. prompt "kmod-snd-usb-audio................ USB sound adapter"
  251. tristate
  252. default n
  253. select ADK_KPACKAGE_KMOD_SND
  254. select ADK_KPACKAGE_KMOD_SND_RAWMIDI
  255. depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
  256. config ADK_KPACKAGE_KMOD_USB_SISUSBVGA
  257. prompt "kmod-usb-svga..................... USB 2.0 SVGA dongle support (Net2280/SiS315)"
  258. tristate
  259. default n
  260. depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
  261. endmenu