123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204 |
- # This file is part of the OpenADK project. OpenADK is copyrighted
- # material, please see the LICENCE file in the top-level directory.
- include $(ADK_TOPDIR)/rules.mk
- include $(ADK_TOPDIR)/mk/kernel-build.mk
- include $(ADK_TOPDIR)/mk/image.mk
- KERNEL:=$(LINUX_DIR)/$(ADK_TARGET_KERNEL)
- ifeq ($(ADK_TARGET_KERNEL_ZIMAGE),y)
- KERNEL:=$(LINUX_DIR)/arch/arm/boot/zImage
- endif
- ifeq ($(ADK_TARGET_KERNEL_UIMAGE),y)
- KERNEL:=$(LINUX_DIR)/arch/arm/boot/uImage
- endif
- QEMU_ARGS:=${ADK_QEMU_ARGS}
- ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM_SPITZ),y)
- QEMU_ARGS+=-M spitz
- endif
- ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM_TERRIER),y)
- QEMU_ARGS+=-M terrier
- endif
- ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM_VERSATILEPB),y)
- QEMU_ARGS+=-M versatilepb -net user -net nic,model=smc91c111
- endif
- ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM_VEXPRESS_A9),y)
- QEMU_ARGS+=-M vexpress-a9 -cpu cortex-a9 -m 256 -net user -net nic,model=lan9118 -dtb $(FW_DIR)/vexpress-v2p-ca9.dtb
- ifeq ($(ADK_TARGET_ROOTFS_ARCHIVE),y)
- QEMU_ARGS+=-drive file=qemu-arm.img,if=sd,format=raw
- endif
- endif
- ifeq ($(ADK_TARGET_QEMU_WITH_VIRTIO),y)
- QEMU_ARGS+=-drive file=qemu-${ADK_TARGET_CPU_ARCH}.img,if=virtio,index=0 -net nic,model=virtio -net user
- endif
- # target helper text
- ifeq ($(ADK_TARGET_FS),archive)
- targethelp:
- @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
- ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM_VEXPRESS_A9)$(ADK_TARGET_SYSTEM_QEMU_ARM_VERSATILEPB)$(ADK_TARGET_SYSTEM_QEMU_ARM_TERRIER)$(ADK_TARGET_SYSTEM_QEMU_ARM_SPITZ),y)
- @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
- @echo "Use following command to create a QEMU Image:"
- @echo "./scripts/create.sh qemu-${ADK_TARGET_CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
- @echo "Start qemu with following options:"
- @echo 'qemu-system-${ADK_TARGET_CPU_ARCH} ${QEMU_ARGS} -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${ADK_TARGET_CPU_ARCH}.img'
- endif
- ifeq ($(ADK_TARGET_SYSTEM_RASPBERRY_PI),y)
- ifeq ($(ADK_APPLIANCE_KODI),y)
- @echo "Use following command to install with a writable data partition"
- @echo "sudo ./scripts/install.sh -d 256 raspberry-pi /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- @echo "If you want to update a card without loosing existing data on the writable partition use:"
- @echo "sudo ./scripts/install.sh -k -d 256 raspbrry-pi /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- @echo "In both cases the cfgfs partition is _not_ removed!"
- else
- @echo "Use following command to install it on SD card:"
- @echo "sudo ./scripts/install.sh raspberry-pi /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- endif
- endif
- ifeq ($(ADK_TARGET_SYSTEM_RASPBERRY_PI2),y)
- ifeq ($(ADK_APPLIANCE_KODI),y)
- @echo "Use following command to install with a writable data partition"
- @echo "sudo ./scripts/install.sh -d 256 raspberry-pi2 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- @echo "If you want to update a card without loosing existing data on the writable partition use:"
- @echo "sudo ./scripts/install.sh -k -d 256 raspberry-pi2 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- @echo "In both cases the cfgfs partition is _not_ removed!"
- else
- @echo "Use following command to install it on SD card:"
- @echo "sudo ./scripts/install.sh raspberry-pi2 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- @echo "Use following command to install with a writable data partition"
- @echo "sudo ./scripts/install.sh -d 256 raspberry-pi2 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- endif
- endif
- ifeq ($(ADK_TARGET_SYSTEM_BANANA_PRO),y)
- @echo "Use following command to install it on SD card:"
- @echo "sudo ./scripts/install.sh banana-pro /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- @echo "Use following command to install with a writable data partition"
- @echo "sudo ./scripts/install.sh -d 256 banana-pro /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- endif
- ifeq ($(ADK_TARGET_SYSTEM_SOLIDRUN_IMX6),y)
- ifeq ($(ADK_APPLIANCE_KODI),y)
- @echo "Use following command to install with a writable data partition"
- @echo "sudo ./scripts/install.sh -d 256 solidrun-imx6 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- @echo "If you want to update a card without loosing existing data on the writable partition use:"
- @echo "sudo ./scripts/install.sh -k -d 256 solidrun-imx6 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- @echo "In both cases the cfgfs partition is _not_ removed!"
- else
- @echo "Use following command to install it on SD card:"
- @echo "sudo ./scripts/install.sh solidrun-imx6 /dev/sdX $(FW_DIR)/$(ROOTFSTARBALL)"
- endif
- endif
- endif
- ifeq ($(ADK_TARGET_FS),initramfs)
- targethelp:
- @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
- @echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
- ifeq ($(ADK_TARGET_QEMU),y)
- @echo "Start qemu with following command line:"
- @echo 'qemu-system-${ADK_TARGET_CPU_ARCH} ${QEMU_ARGS} -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
- endif
- endif
- ifeq ($(ADK_TARGET_FS),initramfsarchive)
- targethelp:
- @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
- @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSUSERTARBALL)"
- endif
- ifeq ($(ADK_TARGET_FS),initramfspiggyback)
- targethelp:
- @echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
- ifeq ($(ADK_TARGET_QEMU),y)
- @echo "Start qemu with following command line:"
- @echo 'qemu-system-${ADK_TARGET_CPU_ARCH} ${QEMU_ARGS} -kernel $(FW_DIR)/$(TARGET_KERNEL)'
- endif
- endif
- ifeq ($(ADK_TARGET_FS),nfsroot)
- targethelp:
- @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
- @echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSUSERTARBALL)"
- endif
- ifeq ($(ADK_TARGET_FS),squashfs)
- targethelp:
- @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
- @echo "The RootFS image is: $(FW_DIR)/$(ROOTFSSQUASHFS)"
- ifeq ($(ADK_TARGET_QEMU),y)
- @echo "Start qemu with following options:"
- @echo 'qemu-system-${ADK_TARGET_CPU_ARCH} $(QEMU_ARGS) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) $(FW_DIR)/$(ROOTFSSQUASHFS)'
- endif
- endif
- ifeq ($(ADK_TARGET_FS),jffs2)
- targethelp:
- @echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
- @echo "The RootFS image is: $(FW_DIR)/$(ROOTFSJFFS2)"
- ifeq ($(ADK_TARGET_QEMU),y)
- @echo "Start qemu with following options:"
- @echo 'qemu-system-${ADK_TARGET_CPU_ARCH} $(QEMU_ARGS) -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) $(FW_DIR)/$(ROOTFSJFFS2)'
- endif
- endif
- kernel-strip:
- @cp $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL)
- ifeq ($(ADK_TARGET_BOARD_BCM28XX),y)
- @echo adding DT trailer to kernel $(MAKE_TRACE)
- -rm $(BUILD_DIR)/$(TARGET_KERNEL)
- PATH='$(HOST_PATH)' $(ADK_TOPDIR)/scripts/mkknlimg --dtok $(KERNEL) $(BUILD_DIR)/$(TARGET_KERNEL) $(MAKE_TRACE)
- endif
- kernel-install: kernel-strip
- @cp $(BUILD_DIR)/$(TARGET_KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
- ifeq ($(ADK_TARGET_FS),squashfs)
- env PATH=$(HOST_PATH) qemu-img create -f raw $(FW_DIR)/$(ROOTFSSQUASHFS) $(ADK_TARGET_MTD_SIZE)
- dd conv=notrunc if=$(BUILD_DIR)/root.squashfs of=$(FW_DIR)/$(ROOTFSSQUASHFS)
- endif
- dtb-install:
- ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM_VEXPRESS_A9),y)
- env $(KERNEL_MAKE_ENV) $(MAKE) -C "${LINUX_DIR}" $(KERNEL_MAKE_OPTS) \
- dtbs $(MAKE_TRACE)
- endif
- ifeq ($(ADK_TARGET_BOARD_BCM28XX),y)
- env $(KERNEL_MAKE_ENV) $(MAKE) -C "${LINUX_DIR}" $(KERNEL_MAKE_OPTS) \
- dtbs $(MAKE_TRACE)
- mkdir -p $(FW_DIR)/overlays
- for x in $(LINUX_DIR)/arch/arm/boot/dts/overlays/*.dtb; do \
- [[ -e "$$x" ]] && cp $(LINUX_DIR)/arch/arm/boot/dts/overlays/*.dtb $(FW_DIR)/overlays; \
- break; \
- done
- endif
- ifeq ($(ADK_TARGET_SYSTEM_BANANA_PRO),y)
- env $(KERNEL_MAKE_ENV) $(MAKE) -C "${LINUX_DIR}" $(KERNEL_MAKE_OPTS) \
- sun7i-a20-bananapro.dtb $(MAKE_TRACE)
- endif
- ifeq ($(ADK_TARGET_SYSTEM_SOLIDRUN_IMX6),y)
- env $(KERNEL_MAKE_ENV) $(MAKE) -C "${LINUX_DIR}" $(KERNEL_MAKE_OPTS) \
- imx6q-cubox-i.dtb imx6dl-cubox-i.dtb imx6dl-hummingboard.dtb imx6q-hummingboard.dtb $(MAKE_TRACE)
- endif
- for x in $(LINUX_DIR)/arch/arm/boot/dts/*.dtb; do \
- [[ -e "$$x" ]] && cp $(LINUX_DIR)/arch/arm/boot/dts/*.dtb $(FW_DIR); \
- break; \
- done
- # filesystem specific targets
- ifeq ($(ADK_TARGET_FS),archive)
- imageinstall: dtb-install $(FW_DIR)/$(ROOTFSTARBALL) targethelp
- endif
- ifeq ($(ADK_TARGET_FS),initramfs)
- imageinstall: kernel-install dtb-install $(FW_DIR)/$(INITRAMFS) targethelp
- endif
- ifeq ($(ADK_TARGET_FS),initramfsarchive)
- imageinstall: kernel-install dtb-install $(FW_DIR)/$(ROOTFSUSERTARBALL) targethelp
- endif
- ifeq ($(ADK_TARGET_FS),initramfspiggyback)
- imageinstall: dtb-install createinitramfs targethelp
- endif
- ifeq ($(ADK_TARGET_FS),nfsroot)
- imageinstall: kernel-install $(FW_DIR)/$(ROOTFSUSERTARBALL) targethelp
- endif
- ifeq ($(ADK_TARGET_FS),squashfs)
- imageinstall: $(BUILD_DIR)/root.squashfs kernel-install dtb-install targethelp
- endif
- ifeq ($(ADK_TARGET_FS),jffs2)
- imageinstall: kernel-install dtb-install $(FW_DIR)/$(ROOTFSJFFS2) targethelp
- endif
- ifeq ($(ADK_TARGET_FS),usb)
- imageinstall: $(FW_DIR)/$(ROOTFSTARBALL) targethelp
- endif
|