buildsys: s/CROSS/CROSS_COMPILE/g

Use CROSS_COMPILE instead of CROSS as other projects are doing
(i.e. kernel, busybox, buildroot).
CROSS is still supported for backward compatibility only

Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>

INSTALL

@@ -54,7 +54,7 @@ COMPILING uClibc:
     to compile uClibc.  or if you are cross compiling, you would
     instead run something like:
 
-            make CROSS=arm-linux-
+            make CROSS_COMPILE=arm-linux-
 
 
 INSTALLING the uClibc development environment:

Makefile.help

@@ -54,7 +54,7 @@ help:
 	@echo '  V="" 			- Quiet build (default)'
 	@echo '  V=1			- Brief build (show defines, ld flags)'
 	@echo '  V=2			- Very verbose build'
-	@echo '  CROSS=		- Override CROSS_COMPILER_PREFIX from .config'
+	@echo '  CROSS_COMPILE=		- Override CROSS_COMPILER_PREFIX from .config'
 	@echo '  ARCH= 		- Use given arch for config targets'
 	@echo '  SHELL=		- Shell to use for make'
 	@echo '  CONFIG_SHELL=		- Shell to use for menuconfig'

Makefile.in

@@ -405,19 +405,19 @@ ifeq ($(HAVE_SHARED),y)
 endif
 
 utils: | pregen
-	$(Q)$(MAKE) CROSS="$(CROSS)" CC="$(CC)" -C utils $@
+	$(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" -C utils $@
 
 # Installs helper applications, such as 'ldd' and 'ldconfig'
 install_utils: utils
-	$(Q)$(MAKE) CROSS="$(CROSS)" CC="$(CC)" -C utils utils_install
+	$(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" -C utils utils_install
 
 endif # ifeq ($(HAVE_DOT_CONFIG),y)
 
 hostutils: | pregen
-	$(Q)$(MAKE) CROSS="$(CROSS)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils $@
+	$(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils $@
 
 install_hostutils: hostutils
-	$(Q)$(MAKE) CROSS="$(CROSS)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils utils_install
+	$(Q)$(MAKE) CROSS_COMPILE="$(CROSS_COMPILE)" CC="$(CC)" HOSTCC="$(HOSTCC)" DOTHOST=.host -C utils utils_install
 
 $(addprefix $(top_builddir),include include/bits include/sys include/config lib extra/config/lxdialog extra/locale extra/scripts $(subdirs)):
 	$(do_mkdir)

Rules.mak

@@ -30,24 +30,24 @@ endif
 
 #-----------------------------------------------------------
 # If you are running a cross compiler, you will want to set
-# 'CROSS' to something more interesting ...  Target
+# 'CROSS_COMPILE' to something more interesting ...  Target
 # architecture is determined by asking the CC compiler what
 # arch it compiles things for, so unless your compiler is
 # broken, you should not need to specify TARGET_ARCH.
 #
 # Most people will set this stuff on the command line, i.e.
-#        make CROSS=arm-linux-
+#        make CROSS_COMPILE=arm-linux-
 # will build uClibc for 'arm'.
+# CROSS is still supported for backward compatibily only
 
-ifndef CROSS
-CROSS=
-endif
-CC         = $(CROSS)gcc
-AR         = $(CROSS)ar
-LD         = $(CROSS)ld
-NM         = $(CROSS)nm
-OBJDUMP    = $(CROSS)objdump
-STRIPTOOL  = $(CROSS)strip
+CROSS_COMPILE ?= $(CROSS)
+
+CC         = $(CROSS_COMPILE)gcc
+AR         = $(CROSS_COMPILE)ar
+LD         = $(CROSS_COMPILE)ld
+NM         = $(CROSS_COMPILE)nm
+OBJDUMP    = $(CROSS_COMPILE)objdump
+STRIPTOOL  = $(CROSS_COMPILE)strip
 
 INSTALL    = install
 LN         = ln
@@ -159,8 +159,8 @@ endif
 comma:=,
 space:= #
 
-ifndef CROSS
-CROSS=$(call qstrip,$(CROSS_COMPILER_PREFIX))
+ifndef CROSS_COMPILE
+CROSS_COMPILE=$(call qstrip,$(CROSS_COMPILER_PREFIX))
 endif
 
 # A nifty macro to make testing gcc features easier

extra/scripts/MAKEALL

@@ -77,13 +77,11 @@ pass=""
 fail=""
 skip=""
 for a in "$@" ; do
-	if [ -n "${CROSS_COMPILE}" ] ; then
-		CROSS=${CROSS_COMPILE}
-	else
-		CROSS=$(find_compiler ${a})
+	if [ -z "${CROSS_COMPILE}" ] ; then
+		CROSS_COMPILE=$(find_compiler ${a})
 	fi
 
-	if [ -z "${CROSS}" ] ; then
+	if [ -z "${CROSS_COMPILE}" ] ; then
 		mark_arch skip $a
 		echo " ### SKIP: ${a}: could not find compiler"
 		continue
@@ -93,17 +91,17 @@ for a in "$@" ; do
 	(
 	set -e
 
-	echo " ### Building target ${a} (${CROSS})"
+	echo " ### Building target ${a} (${CROSS_COMPILE})"
 
 	do_make distclean
 	do_make ARCH=$a defconfig
 	do_make oldconfig
 
-	setconfig CROSS_COMPILER_PREFIX ${CROSS}
+	setconfig CROSS_COMPILER_PREFIX ${CROSS_COMPILE}
 
-	header_path=${KERNEL_HEADERS:-$(echo '#include <linux/version.h>' | ${CROSS}cpp 2>/dev/null | grep -o '[^"]*linux/version.h')} || :
+	header_path=${KERNEL_HEADERS:-$(echo '#include <linux/version.h>' | ${CROSS_COMPILE}cpp 2>/dev/null | grep -o '[^"]*linux/version.h')} || :
 	if [ -z "${header_path}" ] ; then
-		for p in /usr/${CROSS%-}/usr/include ; do
+		for p in /usr/${CROSS_COMPILE%-}/usr/include ; do
 			if [ -e ${p}/linux/version.h ] ; then
 				header_path=${p}
 				break

libc/sysdeps/linux/m68k/README.m68k

@@ -16,9 +16,9 @@ Configuration:
 	Read and edit the Config file, carefully.
 
 	TARGET_ARCH=m68k
-	CROSS = m68k-pic-coff-
-	CC = $(CROSS)gcc
-	STRIPTOOL = $(CROSS)strip
+	CROSS_COMPILE = m68k-pic-coff-
+	CC = $(CROSS_COMPILE)gcc
+	STRIPTOOL = $(CROSS_COMPILE)strip
 	KERNEL_SOURCE=/opt/uClinux/linux
 	HAS_MMU = false
 	HAS_FLOATS = false