uclibc-ng/extra/Configs/Config.m68k

# Library Configuration rules for uClibc
#
# This file contains rules which are shared between multiple Makefiles.  All
# normal configuration options live in the file named "Config".  You probably
# should not mess with this file unless you know what you are doing...  
# 
# Copyright (C) 2000 by Lineo, inc.
# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org>
#
# This program is free software; you can redistribute it and/or modify it under
# the terms of the GNU Library General Public License as published by the Free
# Software Foundation; either version 2 of the License, or (at your option) any
# later version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more
# details.
#
# You should have received a copy of the GNU Library General Public License
# along with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# Derived in part from the Linux-8086 C library, the GNU C Library, and several
# other sundry sources.  Files within this library are copyright by their
# respective copyright holders.

# What arch do you want to compile for...
#TARGET_ARCH=arm
#TARGET_ARCH=i386
TARGET_ARCH=m68k
#TARGET_ARCH=powerpc
#TARGET_ARCH=sh
#TARGET_ARCH=sparc

# If you are running a cross compiler, you may want to set this
# to something more interesting...
NATIVE_CC = gcc
#CROSS = m68k-elf-
CC = $(CROSS)gcc
AR = $(CROSS)ar
LD = $(CROSS)ld
NM = $(CROSS)nm
STRIPTOOL = $(CROSS)strip
#STRIPTOOL = /bin/true

# Set the following to `true' to make a debuggable build, and `false' for
# production builds.
DODEBUG = false

# Compiler warnings you want to see 
WARNINGS=-Wall

# Note that the kernel source you use to compile with should be the same as the
# Linux kernel you run your apps on.  uClibc doesn't even try to achieve binary
# compatibility across kernel versions.  So don't expect, for example, uClibc
# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x
# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers,
# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't
# work at all.  You have been warned.
KERNEL_SOURCE=/usr/src/linux

# Set this to `false' if your CPU doesn't have a memory management unit (MMU).
# Set it to `true' otherwise.
HAS_MMU = false

# Set this to `false' if you don't have/need basic floating point support
# support in libc (strtod, printf, scanf).  Set it to `true' otherwise.
# If this is not true, then libm will not be built.
HAS_FLOATING_POINT = true

# Set to `true' if you want the math library to contain the full set
# of C99 math library features.  Costs an extra 35k or so on x86. 
DO_C99_MATH = false

# Set this to `false' if you don't have/need "(unsigned) long long int" support.
# Set it to `true' otherwise.
# Affects *printf and *scanf functions.
# Also omits strto(u)ll, and (u)lltostr from the library if `false'.
HAS_LONG_LONG = true

# Set this to `false' if you don't have/need locale support; `true' otherwise.
# Note: Currently only affects the ctype functions.  You must also generate
# a locale file for anything but the C locale.  See directory extra/locale for
# a utility to do so.  Also see the following option.
HAS_LOCALE = false

# Set this to the path of your uClibc locale file directory.
# Warning!  This must be different than the glibc locale directory to avoid
# name conflicts, as the locale files are entirely different in format!
LOCALE_DIR = "/usr/share/uClibc-locale/"

# This specifies which malloc implementation is used.
# "malloc-simple" is very, very small, but is also very, very dumb 
# and does not try to make good use of memory or clean up after itself.
#
# "malloc" on the other hand is a bit bigger, but is pretty smart thereby
# minimizing memory wastage and reusing already allocated memory.  This 
# can be lots faster and safer IMHO.
#
# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc.
# It is actually smaller than "malloc", at least on i386.  Right now, it
# only works on i386 (and maybe m68k) because it needs sbrk.
MALLOC = malloc-simple
#MALLOC = malloc 
#MALLOC = malloc-930716

# If you want to collect common syscall code into one function, set to this to
# `true'.  Set it to false otherwise.
# On i386 this saves about than 2.8k over all syscalls.
# The idea came from the implementation in dietlibc.
# At present, only affects i386.
UNIFIED_SYSCALL = false

# If you want large file summit support (greater then 2 Gib), 
# turn this on.  This has no effect unless your kernel supports 
# lfs.  This currently does nothing, but may someday...
DOLFS = false

# If you want to include RPC support, enable this.  RPC is almost never used 
# for anything except NFS support, so unless you plan to use NFS, leave this
# disabled.  This is off by default.
INCLUDE_RPC = true

# If you want to include support for the next version of the Internet
# Protocol: IP version 6, enable this.  This is off by default.
INCLUDE_IPV6 = false

# If you want to compile the library as PIC code, turn this on.
DOPIC = false

#
# ARCH_CFLAGS if your have something special to add to the CFLAGS
#
ARCH_CFLAGS  = -Wa,--bitwise-or
#
# this is needed for 2.4 m68knommu builds
#
ARCH_CFLAGS2 = -I$(KERNEL_SOURCE)/include
#
# get this from elsewhere, maybe
#
OPTIMIZATION = $(DEBUG_CFLAGS)



# Enable support for shared libraries?  If this is false, you can
# ignore all the rest of the options in this file...
HAVE_SHARED = false

# uClibc has a native shared library loader for some architectures.
BUILD_UCLIBC_LDSO=false

# If you are using shared libraries, but do not want/have a native
# uClibc shared library loader, please specify the name of your
# system's shared library loader here...
#SYSTEM_LDSO=/lib/ld-linux.so.2

# When using shared libraries, this path is the location where the
# shared library will be invoked.  This value will be compiled into
# every binary compiled with uClibc.  
#
# BIG FAT WARNING:  
# If you do not have a shared library loader with the correct name
# sitting in the directory this points to, your binaries will not run.
SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib

# DEVEL_PREFIX is the directory into which the uClibc development
# environment will be installed.   The result will look something 
# like the following:
#   DEVEL_PREFIX/
#	bin/            <contains gcc, ld, etc>
#	lib/            <contains all runtime and static libs>
#	include/        <Where all the header files go>
# This value is used by the 'make install' Makefile target.  Since this
# directory is compiled into the uclibc cross compiler spoofer, you
# have to recompile if you change this value...
DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc

# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing
# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc.   This is only used by
# the 'make install' target, and is not compiled into anything.  This
# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will
# want to set this to "/usr" instead.
SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)/usr

# If you want 'make install' to install everything under a temporary
# directory, the define PREFIX during the install step,
# i.e., 'make PREFIX=/var/tmp/uClibc install'.
#PREFIX = $(TOPDIR)/_install
PREFIX =