fcntl.h 8.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228
  1. /* O_*, F_*, FD_* bit values for Linux.
  2. Copyright (C) 1995, 1996, 1997, 1998, 2000 Free Software Foundation, Inc.
  3. This file is part of the GNU C Library.
  4. The GNU C Library is free software; you can redistribute it and/or
  5. modify it under the terms of the GNU Lesser General Public
  6. License as published by the Free Software Foundation; either
  7. version 2.1 of the License, or (at your option) any later version.
  8. The GNU C Library is distributed in the hope that it will be useful,
  9. but WITHOUT ANY WARRANTY; without even the implied warranty of
  10. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  11. Lesser General Public License for more details.
  12. You should have received a copy of the GNU Lesser General Public
  13. License along with the GNU C Library; if not, see
  14. <http://www.gnu.org/licenses/>. */
  15. #ifndef _FCNTL_H
  16. # error "Never use <bits/fcntl.h> directly; include <fcntl.h> instead."
  17. #endif
  18. #include <sys/types.h>
  19. #ifdef __USE_GNU
  20. # include <bits/uio.h>
  21. #endif
  22. /* open/fcntl - O_SYNC is only implemented on blocks devices and on files
  23. located on an ext2 file system */
  24. #define O_ACCMODE 0003
  25. #define O_RDONLY 00
  26. #define O_WRONLY 01
  27. #define O_RDWR 02
  28. #define O_CREAT 0100 /* not fcntl */
  29. #define O_EXCL 0200 /* not fcntl */
  30. #define O_NOCTTY 0400 /* not fcntl */
  31. #define O_TRUNC 01000 /* not fcntl */
  32. #define O_APPEND 02000
  33. #define O_NONBLOCK 04000
  34. #define O_NDELAY O_NONBLOCK
  35. #define O_SYNC 010000
  36. #define O_FSYNC O_SYNC
  37. #define O_ASYNC 020000
  38. #ifdef __USE_XOPEN2K8
  39. # define O_DIRECTORY 0200000 /* Must be a directory. */
  40. # define O_NOFOLLOW 0400000 /* Do not follow links. */
  41. # define O_CLOEXEC 02000000 /* set close_on_exec */
  42. #endif
  43. #ifdef __USE_GNU
  44. # define O_DIRECT 040000 /* Direct disk access. */
  45. # define O_NOATIME 01000000 /* don't set atime */
  46. # define O_PATH 010000000 /* Resolve pathname but do not open file. */
  47. # define O_TMPFILE 020200000 /* Atomically create nameless file. */
  48. #endif
  49. /* For now Linux has synchronisity options for data and read operations.
  50. We define the symbols here but let them do the same as O_SYNC since
  51. this is a superset. */
  52. #if defined __USE_POSIX199309 || defined __USE_UNIX98
  53. # define O_DSYNC O_SYNC /* Synchronize data. */
  54. # define O_RSYNC O_SYNC /* Synchronize read operations. */
  55. #endif
  56. #ifdef __USE_LARGEFILE64
  57. # define O_LARGEFILE 0100000
  58. #endif
  59. /* Values for the second argument to `fcntl'. */
  60. #define F_DUPFD 0 /* Duplicate file descriptor. */
  61. #define F_GETFD 1 /* Get file descriptor flags. */
  62. #define F_SETFD 2 /* Set file descriptor flags. */
  63. #define F_GETFL 3 /* Get file status flags. */
  64. #define F_SETFL 4 /* Set file status flags. */
  65. #ifndef __USE_FILE_OFFSET64
  66. # define F_GETLK 5 /* Get record locking info. */
  67. # define F_SETLK 6 /* Set record locking info (non-blocking). */
  68. # define F_SETLKW 7 /* Set record locking info (blocking). */
  69. #else
  70. # define F_GETLK F_GETLK64 /* Get record locking info. */
  71. # define F_SETLK F_SETLK64 /* Set record locking info (non-blocking).*/
  72. # define F_SETLKW F_SETLKW64 /* Set record locking info (blocking). */
  73. #endif
  74. #define F_GETLK64 12 /* Get record locking info. */
  75. #define F_SETLK64 13 /* Set record locking info (non-blocking). */
  76. #define F_SETLKW64 14 /* Set record locking info (blocking). */
  77. #if defined __USE_BSD || defined __USE_XOPEN2K
  78. # define F_SETOWN 8 /* Get owner of socket (receiver of SIGIO). */
  79. # define F_GETOWN 9 /* Set owner of socket (receiver of SIGIO). */
  80. #endif
  81. #ifdef __USE_GNU
  82. # define F_SETSIG 10 /* Set number of signal to be sent. */
  83. # define F_GETSIG 11 /* Get number of signal to be sent. */
  84. #endif
  85. #ifdef __USE_GNU
  86. # define F_SETLEASE 1024 /* Set a lease. */
  87. # define F_GETLEASE 1025 /* Enquire what lease is active. */
  88. # define F_NOTIFY 1026 /* Request notfications on a directory. */
  89. # define F_SETPIPE_SZ 1031 /* Set pipe page size array. */
  90. # define F_GETPIPE_SZ 1032 /* Get pipe page size array. */
  91. #endif
  92. #if defined __USE_XOPEN2K8 || defined __USE_GNU
  93. # define F_DUPFD_CLOEXEC 1030 /* Duplicate file descriptor with
  94. close-on-exit set on new fd. */
  95. #endif
  96. /* For F_[GET|SET]FL. */
  97. #define FD_CLOEXEC 1 /* actually anything with low bit set goes */
  98. /* For posix fcntl() and `l_type' field of a `struct flock' for lockf(). */
  99. #define F_RDLCK 0 /* Read lock. */
  100. #define F_WRLCK 1 /* Write lock. */
  101. #define F_UNLCK 2 /* Remove lock. */
  102. /* For old implementation of bsd flock(). */
  103. #define F_EXLCK 4 /* or 3 */
  104. #define F_SHLCK 8 /* or 4 */
  105. #ifdef __USE_BSD
  106. /* Operations for bsd flock(), also used by the kernel implementation. */
  107. # define LOCK_SH 1 /* shared lock */
  108. # define LOCK_EX 2 /* exclusive lock */
  109. # define LOCK_NB 4 /* or'd with one of the above to prevent
  110. blocking */
  111. # define LOCK_UN 8 /* remove lock */
  112. #endif
  113. struct flock
  114. {
  115. short int l_type; /* Type of lock: F_RDLCK, F_WRLCK, or F_UNLCK. */
  116. short int l_whence; /* Where `l_start' is relative to (like `lseek'). */
  117. #ifndef __USE_FILE_OFFSET64
  118. __off_t l_start; /* Offset where the lock begins. */
  119. __off_t l_len; /* Size of the locked area; zero means until EOF. */
  120. #else
  121. __off64_t l_start; /* Offset where the lock begins. */
  122. __off64_t l_len; /* Size of the locked area; zero means until EOF. */
  123. #endif
  124. __pid_t l_pid; /* Process holding the lock. */
  125. };
  126. #ifdef __USE_LARGEFILE64
  127. struct flock64
  128. {
  129. short int l_type; /* Type of lock: F_RDLCK, F_WRLCK, or F_UNLCK. */
  130. short int l_whence; /* Where `l_start' is relative to (like `lseek'). */
  131. __off64_t l_start; /* Offset where the lock begins. */
  132. __off64_t l_len; /* Size of the locked area; zero means until EOF. */
  133. __pid_t l_pid; /* Process holding the lock. */
  134. };
  135. #endif
  136. /* Define some more compatibility macros to be backward compatible with
  137. BSD systems which did not managed to hide these kernel macros. */
  138. #ifdef __USE_BSD
  139. # define FAPPEND O_APPEND
  140. # define FFSYNC O_FSYNC
  141. # define FASYNC O_ASYNC
  142. # define FNONBLOCK O_NONBLOCK
  143. # define FNDELAY O_NDELAY
  144. #endif /* Use BSD. */
  145. /* Advise to `posix_fadvise'. */
  146. #ifdef __USE_XOPEN2K
  147. # define POSIX_FADV_NORMAL 0 /* No further special treatment. */
  148. # define POSIX_FADV_RANDOM 1 /* Expect random page references. */
  149. # define POSIX_FADV_SEQUENTIAL 2 /* Expect sequential page references. */
  150. # define POSIX_FADV_WILLNEED 3 /* Will need these pages. */
  151. # define POSIX_FADV_DONTNEED 4 /* Don't need these pages. */
  152. # define POSIX_FADV_NOREUSE 5 /* Data will be accessed once. */
  153. #endif
  154. #if defined __USE_GNU && defined __UCLIBC_LINUX_SPECIFIC__
  155. /* Flags for SYNC_FILE_RANGE. */
  156. # define SYNC_FILE_RANGE_WAIT_BEFORE 1 /* Wait upon writeout of all pages
  157. in the range before performing the
  158. write. */
  159. # define SYNC_FILE_RANGE_WRITE 2 /* Initiate writeout of all those
  160. dirty pages in the range which are
  161. not presently under writeback. */
  162. # define SYNC_FILE_RANGE_WAIT_AFTER 4 /* Wait upon writeout of all pages in
  163. the range after performing the
  164. write. */
  165. /* Flags for SPLICE and VMSPLICE. */
  166. # define SPLICE_F_MOVE 1 /* Move pages instead of copying. */
  167. # define SPLICE_F_NONBLOCK 2 /* Don't block on the pipe splicing
  168. (but we may still block on the fd
  169. we splice from/to). */
  170. # define SPLICE_F_MORE 4 /* Expect more data. */
  171. # define SPLICE_F_GIFT 8 /* Pages passed in are a gift. */
  172. #endif
  173. __BEGIN_DECLS
  174. #if defined __USE_GNU && defined __UCLIBC_LINUX_SPECIFIC__
  175. /* Provide kernel hint to read ahead. */
  176. extern ssize_t readahead (int __fd, __off64_t __offset, size_t __count)
  177. __THROW;
  178. /* Selective file content synch'ing. */
  179. extern int sync_file_range (int __fd, __off64_t __from, __off64_t __to,
  180. unsigned int __flags);
  181. /* Splice address range into a pipe. */
  182. extern ssize_t vmsplice (int __fdout, const struct iovec *__iov,
  183. size_t __count, unsigned int __flags);
  184. /* Splice two files together. */
  185. extern ssize_t splice (int __fdin, __off64_t *__offin, int __fdout,
  186. __off64_t *__offout, size_t __len,
  187. unsigned int __flags);
  188. /* In-kernel implementation of tee for pipe buffers. */
  189. extern ssize_t tee (int __fdin, int __fdout, size_t __len,
  190. unsigned int __flags);
  191. #endif
  192. __END_DECLS