menu "USB support"
config ADK_KERNEL_USB_DEVICEFS
boolean
default n
config ADK_KERNEL_USB_LIBUSUAL
tristate
default n
config ADK_KERNEL_USB_SERIAL
boolean
default n
config ADK_KPACKAGE_KMOD_USB
prompt "kmod-usb-core..................... USB support"
tristate
default y if ADK_LINUX_X86_ALIX1C || ADK_LINUX_CRIS_FOXBOARD
default n
select ADK_KERNEL_NLS
select ADK_KERNEL_USB_DEVICEFS
help
Universal Serial Bus (USB) is a specification for a serial bus
subsystem which offers higher speeds and more features than the
traditional PC serial port. The bus supplies power to peripherals
and allows for hot swapping. Up to 127 USB peripherals can be
connected to a single USB host in a tree structure.
The USB host is the root of the tree, the peripherals are the
leaves and the inner nodes are special USB devices called hubs.
Most PCs now have USB host ports, used to connect peripherals
such as scanners, keyboards, mice, modems, cameras, disks,
flash memory, network links, and printers to the PC.
Say Y here if your computer has a host-side USB port and you want
to use USB devices. You then need to say Y to at least one of the
Host Controller Driver (HCD) options below. Choose a USB 1.1
controller, such as "UHCI HCD support" or "OHCI HCD support",
and "EHCI HCD (USB 2.0) support" except for older systems that
do not have USB 2.0 support. It doesn't normally hurt to select
them all if you are not certain.
If your system has a device-side USB port, used in the peripheral
side of the USB protocol, see the "USB Gadget" framework instead.
After choosing your HCD, then select drivers for the USB peripherals
you'll be using. You may want to check out the information provided
in and especially the links given in
.
config ADK_KPACKAGE_KMOD_USB_UHCI_HCD
prompt "kmod-usb-uhci................... Support for UHCI controllers"
tristate
depends on ADK_KPACKAGE_KMOD_USB
depends on !ADK_LINUX_CRIS_FOXBOARD
select ADK_PACKAGE_KMOD_USB_CONTROLLER
help
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
host controller). If your USB host controller conforms to this
standard, you may want to say Y, but see below. All recent boards
with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
i810, i820) conform to this standard. Also all VIA PCI chipsets
(like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
133). If unsure, say Y.
config ADK_KPACKAGE_KMOD_USB_OHCI_HCD
prompt "kmod-usb-ohci................... Support for OHCI controllers"
tristate
default y if ADK_LINUX_X86_ALIX1C
default n
depends on !ADK_LINUX_CRIS_FOXBOARD
depends on ADK_KPACKAGE_KMOD_USB
select ADK_PACKAGE_KMOD_USB_CONTROLLER
help
The Open Host Controller Interface (OHCI) is a standard for accessing
USB 1.1 host controller hardware. It does more in hardware than Intel's
UHCI specification. If your USB host controller follows the OHCI spec,
say Y. On most non-x86 systems, and on x86 hardware that's not using a
USB controller from Intel or VIA, this is appropriate. If your host
controller doesn't use PCI, this is probably appropriate. For a PCI
based system where you're not sure, the "lspci -v" entry will list the
right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
config ADK_KPACKAGE_KMOD_USB_ISP116X_HCD
prompt "kmod-usb-isp116x................ ISP116X HCD support"
tristate
default n
depends on !ADK_LINUX_CRIS_FOXBOARD
depends on ADK_KPACKAGE_KMOD_USB
select ADK_PACKAGE_KMOD_USB_CONTROLLER
help
The ISP1160 and ISP1161 chips are USB host controllers. Enable this
option if your board has this chip. If unsure, say N.
This driver does not support isochronous transfers.
config ADK_KPACKAGE_KMOD_USB_SL811_HCD
prompt "kmod-usb-sl811.................. SL811HS HCD support"
tristate
default n
depends on !ADK_LINUX_CRIS_FOXBOARD
depends on ADK_KPACKAGE_KMOD_USB
select ADK_PACKAGE_KMOD_USB_CONTROLLER
help
The SL811HS is a single-port USB controller that supports either
host side or peripheral side roles. Enable this option if your
board has this chip, and you want to use it as a host controller.
If unsure, say N.
config ADK_KPACKAGE_KMOD_USB_EHCI_HCD
prompt "kmod-usb-ehci................... Support for USB 2.0 controllers"
tristate
depends on !ADK_LINUX_CRIS_FOXBOARD
default y if ADK_LINUX_X86_ALIX1C
default n
depends on ADK_KPACKAGE_KMOD_USB
select ADK_PACKAGE_KMOD_USB_CONTROLLER
help
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
If your USB host controller supports USB 2.0, you will likely want to
configure this Host Controller Driver. At the time of this writing,
the primary implementation of EHCI is a chip from NEC, widely available
in add-on PCI cards, but implementations are in the works from other
vendors including Intel and Philips. Motherboard support is appearing.
EHCI controllers are packaged with "companion" host controllers (OHCI
or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
will connect to EHCI if the device is high speed, otherwise they
connect to a companion controller. If you configure EHCI, you should
probably configure the OHCI (for NEC and some other vendors) USB Host
Controller Driver or UHCI (for Via motherboards) Host Controller
Driver too.
You may want to read .
config ADK_PACKAGE_KMOD_USB_CONTROLLER
tristate
depends on ADK_KPACKAGE_KMOD_USB_UHCI_HCD || ADK_KPACKAGE_KMOD_USB_OHCI_HCD || ADK_KPACKAGE_KMOD_EHCI_HCD || ADK_LINUX_CRIS_FOXBOARD
select ADK_KERNEL_USB_DEVICEFS
default n
config ADK_KPACKAGE_KMOD_USB_ACM
prompt "kmod-usb-acm...................... Support for USB modems/isdn controllers"
tristate
default n
depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
config ADK_KPACKAGE_KMOD_USB_PEGASUS
prompt "kmod-usb-pegasus.................. Support for USB Pegasus"
tristate
default n
depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
config ADK_KPACKAGE_KMOD_USB_PRINTER
prompt "kmod-usb-printer.................. Support for USB printers"
tristate
default n
depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
config ADK_KPACKAGE_KMOD_USB_SERIAL
prompt "kmod-usb-serial................... Support for USB-to-serial converters"
tristate
default n
depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
help
Say Y here if you have a USB device that provides normal serial
ports, or acts like a serial device, and you want to connect it to
your USB bus.
Please read for more
information on the specifics of the different devices that are
supported, and on how to use them.
config ADK_KPACKAGE_KMOD_USB_SERIAL_BELKIN
prompt "kmod-usb-serial-belkin.......... Support for Belkin USB-to-serial converters"
tristate
default n
depends on ADK_KPACKAGE_KMOD_USB_SERIAL
help
Say Y here if you want to use a Belkin USB Serial single port
adaptor (F5U103 is one of the model numbers) or the Peracom single
port USB to serial adapter.
config ADK_KPACKAGE_KMOD_USB_SERIAL_FTDI_SIO
prompt "kmod-usb-serial-ftdi............ Support for FTDI USB-to-serial converter"
tristate
default n
depends on ADK_KPACKAGE_KMOD_USB_SERIAL
help
Say Y here if you want to use a FTDI SIO single port USB to serial
converter device. The implementation I have is called the USC-1000.
This driver has also be tested with the 245 and 232 devices.
See for more
information on this driver and the device.
config ADK_KPACKAGE_KMOD_USB_SERIAL_MCT_U232
prompt "kmod-usb-serial-mct-u232........ Support for Magic Control Technology USB-to-Serial converters"
tristate
default n
depends on ADK_KPACKAGE_KMOD_USB_SERIAL
help
Say Y here if you want to use a USB Serial single port adapter from
Magic Control Technology Corp. (U232 is one of the model numbers).
This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
BAY, Belkin F5U109, and Belkin F5U409 devices.
config ADK_KPACKAGE_KMOD_USB_SERIAL_PL2303
prompt "kmod-usb-serial-pl2303.......... Support for Prolific PL2303 USB-to-Serial converters"
tristate
default n
depends on ADK_KPACKAGE_KMOD_USB_SERIAL
help
Say Y here if you want to use the PL2303 USB Serial single port
adapter from Prolific.
config ADK_KPACKAGE_KMOD_USB_SERIAL_VISOR
prompt "kmod-usb-serial-visor........... Support for Handspring Visor / Palm m50x / Sony Clie Driver"
tristate
default n
depends on ADK_KPACKAGE_KMOD_USB_SERIAL
help
Say Y here if you want to connect to your HandSpring Visor, Palm
m500 or m505 through its USB docking station. See
for more information on using this
driver.
config ADK_KPACKAGE_KMOD_USB_STORAGE
prompt "kmod-usb-storage.................. Support for USB storage devices"
tristate
default n
depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
select ADK_KPACKAGE_KMOD_SCSI if !ADK_KERNEL_SCSI
select ADK_KPACKAGE_KMOD_BLK_DEV_SD if !ADK_KERNEL_SCSI
config ADK_KPACKAGE_KMOD_USB_ATM
prompt "kmod-usb-atm...................... Support for USB ATM devices"
tristate
default n
depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
config ADK_KPACKAGE_KMOD_USB_ATM_SPEEDTOUCH
prompt "kmod-usb-atm-speedtouch......... Support for USB Speedtouch ADSL modem"
tristate
default n
depends on ADK_KPACKAGE_KMOD_USB_ATM
config ADK_KPACKAGE_KMOD_USB_USBNET
prompt "kmod-usb-usbnet................... Multi-purpose USB Networking Framework"
tristate
default n
depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
config ADK_KPACKAGE_KMOD_USB_SISUSBVGA
prompt "kmod-usb-svga..................... USB 2.0 SVGA dongle support (Net2280/SiS315)"
tristate
default n
depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
endmenu