openadk/target/waldux/config/Config.in.sched

# This file is part of the OpenADK project. OpenADK is copyrighted
# material, please see the LICENCE file in the top-level directory.

menu "QoS and/or fair queueing"

config ADK_WALDUX_KERNEL_NET_SCH_CSZ
	bool

config ADK_WALDUX_KERNEL_NET_SCH_NETEM
	bool

config ADK_WALDUX_KERNEL_NET_QOS
	bool

config ADK_WALDUX_KERNEL_NET_ESTIMATOR
	bool

config ADK_WALDUX_KERNEL_NET_SCHED
	bool
	help
	  When the kernel has several packets to send out over a network
	  device, it has to decide which ones to send first, which ones to
	  delay, and which ones to drop. This is the job of the queueing
	  disciplines, several different algorithms for how to do this
	  "fairly" have been proposed.

	  If you say N here, you will get the standard packet scheduler, which
	  is a FIFO (first come, first served). If you say Y here, you will be
	  able to choose from among several alternative algorithms which can
	  then be attached to different network devices. This is useful for
	  example if some of your network devices are real time devices that
	  need a certain minimum data flow rate, or if you need to limit the
	  maximum data flow rate for traffic which matches specified criteria.
	  This code is considered to be experimental.

	  To administer these schedulers, you'll need the user-level utilities
	  from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
	  That package also contains some documentation; for more, check out
	  <http://linux-net.osdl.org/index.php/Iproute2>.

	  This Quality of Service (QoS) support will enable you to use
	  Differentiated Services (diffserv) and Resource Reservation Protocol
	  (RSVP) on your Linux router if you also say Y to the corresponding
	  classifiers below.  Documentation and software is at
	  <http://diffserv.sourceforge.net/>.

comment "Queueing/Scheduling"

config ADK_WALDUX_KERNEL_NET_SCH_CBQ
	tristate "Class Based Queueing (CBQ)"
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n
	help
	  Say Y here if you want to use the Class-Based Queueing (CBQ) packet
	  scheduling algorithm. This algorithm classifies the waiting packets
	  into a tree-like hierarchy of classes; the leaves of this tree are
	  in turn scheduled by separate algorithms.

	  See the top of <file:net/sched/sch_cbq.c> for more details.

	  CBQ is a commonly used scheduler, so if you're unsure, you should
	  say Y here. Then say Y to all the queueing algorithms below that you
	  want to use as leaf disciplines.

config ADK_WALDUX_KERNEL_NET_SCH_HTB
	tristate "Hierarchical Token Bucket (HTB)"
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n
	help
	  Say Y here if you want to use the Hierarchical Token Buckets (HTB)
	  packet scheduling algorithm. See
	  <http://luxik.cdi.cz/~devik/qos/htb/> for complete manual and
	  in-depth articles.

	  HTB is very similar to CBQ regarding its goals however is has
	  different properties and different algorithm.

config ADK_WALDUX_KERNEL_NET_SCH_HFSC
	tristate "Hierarchical Fair Service Curve (HFSC)"
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n
	help
	  Say Y here if you want to use the Hierarchical Fair Service Curve
	  (HFSC) packet scheduling algorithm.

config ADK_WALDUX_KERNEL_NET_SCH_ATM
	tristate "ATM Virtual Circuits (ATM)"
	depends on ADK_WALDUX_KERNEL_ATM
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n
	help
	  Say Y here if you want to use the ATM pseudo-scheduler.  This
	  provides a framework for invoking classifiers, which in turn
	  select classes of this queuing discipline.  Each class maps
	  the flow(s) it is handling to a given virtual circuit.

	  See the top of <file:net/sched/sch_atm.c>) for more details.

config ADK_WALDUX_KERNEL_NET_SCH_PRIO
	tristate "Multi Band Priority Queueing (PRIO)"
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n
	help
	  Say Y here if you want to use an n-band priority queue packet
	  scheduler.

config ADK_WALDUX_KERNEL_NET_SCH_RED
	tristate "Random Early Detection (RED)"
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n
	help
	  Say Y here if you want to use the Random Early Detection (RED)
	  packet scheduling algorithm.

	  See the top of <file:net/sched/sch_red.c> for more details.

config ADK_WALDUX_KERNEL_NET_SCH_SFQ
	tristate "Stochastic Fairness Queueing (SFQ)"
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n
	help
	  Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
	  packet scheduling algorithm .

	  See the top of <file:net/sched/sch_sfq.c> for more details.

config ADK_WALDUX_KERNEL_NET_SCH_TBF
	tristate "Token Bucket Filter (TBF)"
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n
	help
	  Say Y here if you want to use the Token Bucket Filter (TBF) packet
	  scheduling algorithm.

	  See the top of <file:net/sched/sch_tbf.c> for more details.

config ADK_WALDUX_KERNEL_NET_SCH_GRED
	tristate "Generic Random Early Detection (GRED)"
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n
	help
	  Say Y here if you want to use the Generic Random Early Detection
	  (GRED) packet scheduling algorithm for some of your network devices
	  (see the top of <file:net/sched/sch_red.c> for details and
	  references about the algorithm).

config ADK_WALDUX_KERNEL_NET_SCH_DSMARK
	tristate "Differentiated Services marker (DSMARK)"
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n
	help
	  Say Y if you want to schedule packets according to the
	  Differentiated Services architecture proposed in RFC 2475.
	  Technical information on this method, with pointers to associated
	  RFCs, is available at <http://www.gta.ufrj.br/diffserv/>.

config ADK_WALDUX_KERNEL_NET_SCH_INGRESS
	tristate "Ingress Qdisc"
	select ADK_WALDUX_KERNEL_NET_SCHED
	select ADK_WALDUX_KERNEL_NETFILTER
	select ADK_WALDUX_KERNEL_NET_CLS_ACT
	default n
	help
	  Say Y here if you want to use classifiers for incoming packets.
	  If unsure, say Y.

comment "Classification"

config ADK_WALDUX_KERNEL_NET_CLS
	bool
	select ADK_WALDUX_KERNEL_NET_SCHED
	default n

config ADK_WALDUX_KERNEL_NET_CLS_BASIC
	tristate "Elementary classification (BASIC)"
	select ADK_WALDUX_KERNEL_NET_CLS
	default n
	help
	  Say Y here if you want to be able to classify packets using
	  only extended matches and actions.

config ADK_WALDUX_KERNEL_NET_CLS_TCINDEX
	tristate "Traffic-Control Index (TCINDEX)"
	select ADK_WALDUX_KERNEL_NET_CLS
	default n
	help
	  Say Y here if you want to be able to classify packets based on
	  traffic control indices. You will want this feature if you want
	  to implement Differentiated Services together with DSMARK.

config ADK_WALDUX_KERNEL_NET_CLS_ROUTE4
	tristate "Routing decision (ROUTE)"
	select ADK_WALDUX_KERNEL_NET_CLS
	default n
	help
	  If you say Y here, you will be able to classify packets
	  according to the route table entry they matched.

config ADK_WALDUX_KERNEL_NET_CLS_FW
	tristate "Netfilter mark (FW)"
	select ADK_WALDUX_KERNEL_NET_CLS
	default n
	help
	  If you say Y here, you will be able to classify packets
	  according to netfilter/firewall marks.

config ADK_WALDUX_KERNEL_NET_CLS_U32
	tristate "Universal 32bit comparisons w/ hashing (U32)"
	select ADK_WALDUX_KERNEL_NET_CLS
	default n
	help
	  Say Y here to be able to classify packets using a universal
	  32bit pieces based comparison scheme.

config ADK_WALDUX_KERNEL_NET_CLS_U32_PERF
	bool "Performance counters support"
	select ADK_WALDUX_KERNEL_NET_CLS
	depends on ADK_WALDUX_KERNEL_NET_CLS_U32
	default n
	help
	  Say Y here to make u32 gather additional statistics useful for
	  fine tuning u32 classifiers.

config ADK_WALDUX_KERNEL_NET_CLS_U32_MARK
	bool "Netfilter marks support"
	select ADK_WALDUX_KERNEL_NET_CLS
	depends on ADK_WALDUX_KERNEL_NET_CLS_U32
	depends on ADK_WALDUX_KERNEL_NET_CLS_FW
	default n
	help
	  Say Y here to be able to use netfilter marks as u32 key.

comment "Actions"

config ADK_WALDUX_KERNEL_NET_CLS_ACT
	bool
	select ADK_WALDUX_KERNEL_NET_SCHED
	select ADK_WALDUX_KERNEL_NET_ESTIMATOR
	default n

config ADK_WALDUX_KERNEL_NET_ACT_POLICE
	tristate "Traffic Policing"
	select ADK_WALDUX_KERNEL_NET_CLS_ACT
	default n
	help
	  Say Y here if you want to do traffic policing, i.e. strict
	  bandwidth limiting. This action replaces the existing policing
	  module.

config ADK_WALDUX_KERNEL_NET_ACT_GACT
	tristate "Generic actions"
	select ADK_WALDUX_KERNEL_NET_CLS_ACT
	default n
	help
	  Say Y here to take generic actions such as dropping and
	  accepting packets.

config ADK_WALDUX_KERNEL_NET_ACT_MIRRED
	tristate "Redirecting and Mirroring"
	select ADK_WALDUX_KERNEL_NET_CLS_ACT
	default n
	help
	  Say Y here to allow packets to be mirrored or redirected to
	  other devices.

config ADK_WALDUX_KERNEL_NET_ACT_IPT
	tristate "IPtables targets"
	select ADK_WALDUX_KERNEL_NET_CLS_ACT
	select ADK_WALDUX_KERNEL_IP_NF_IPTABLES
	default n
	help
	  Say Y here to be able to invoke iptables targets after successful
	  classification.

config ADK_WALDUX_KERNEL_NET_ACT_PEDIT
	tristate "Packet Editing"
	select ADK_WALDUX_KERNEL_NET_CLS_ACT
	default n
	help
	  Say Y here if you want to mangle the content of packets.

endmenu