new import of embedded-test.sh, successor of uclibc-ng-test.sh

README

@@ -0,0 +1,24 @@
+Embedded Test Framework
+=======================
+
+This is the third incarnation of my embedded test framework.
+
+It started with the concrete idea of musl libc author Rich Felker
+on the musl-libc mailing-list.
+http://www.openwall.com/lists/musl/2013/12/03/26
+
+After that I implemented musl-test-framework which is no longer
+online available. It was just to test musl. The next incarnation
+was adk-test-framework, which tries to be more flexible regarding
+what project should be tested. 
+
+Both solutions required binary kernel and initramfs for the Qemu
+runtime tests and toolchains for the compiling.
+
+The third incarnation now uses either OpenADK or buildroot to
+build a toolchain, the base system and the C library.
+Then it runs either a libc test suite, the ltp project or
+a native compile of a toolchain. More tests can be impemented
+later.
+
+Have fun

embedded-test.sh

@@ -0,0 +1,718 @@
+#!/bin/sh
+# Copyright © 2014
+#	Waldemar Brodkorb <wbx@openadk.org>
+#
+# Provided that these terms and disclaimer and all copyright notices
+# are retained or reproduced in an accompanying document, permission
+# is granted to deal in this work without restriction, including un‐
+# limited rights to use, publicly perform, distribute, sell, modify,
+# merge, give away, or sublicence.
+#
+# This work is provided “AS IS” and WITHOUT WARRANTY of any kind, to
+# the utmost extent permitted by applicable law, neither express nor
+# implied; without malicious intent or gross negligence. In no event
+# may a licensor, author or contributor be held liable for indirect,
+# direct, other damage, loss, or other issues arising in any way out
+# of dealing in the work, even if advised of the possibility of such
+# damage or existence of a defect, except proven that it results out
+# of said person’s immediate fault when using the work as intended.
+#
+# Alternatively, this work may be distributed under the Terms of the
+# General Public License, any version as published by the Free Soft‐
+# ware Foundation.
+
+# architecture specific notes:
+#  mips64n32/mips64eln32 produces segfaults on boot
+#  xtensa needs uImage format for initrd
+#  sheb network card get no ip
+
+ADK_ARCH_LIST="arm armhf m68k-nommu mips mipsel mips64 mips64eln32 mips64n32 mips64n64 mips64el mips64el mips64eln64 ppc-nofpu sh sheb sparc x86 x86_64 xtensa"
+BR_ARCH_LIST="bfin arm mips mipsel mips64 mips64el ppc sh sparc x86 x86_64 xtensa"
+
+topdir=$(pwd)
+
+tools='make git wget xz cpio tar awk sed'
+f=0
+for tool in $tools; do
+	if ! which $tool >/dev/null; then
+		echo "Checking if $tool is installed... failed"
+		f=1
+	fi
+done
+if [ $f -eq 1 ];then exit 1; fi
+
+help() {
+	cat >&2 <<EOF
+Syntax: $0 -a <arch> -v <vendor> -s <source>
+
+Explanation:
+	-a: architecture to check
+	-v: vendor for buildsystem (openadk|buildroot)
+	-u: update vendor source via git pull
+	-s: use directory with source for C library
+	-d: enable debug
+	-c: clean build directory before build
+	-n: set NTP server for test run
+	-b: only run basic bootup test
+	-t: run libc testsuite
+	-p: run Linux test project (LTP)
+	-h: help text
+EOF
+
+}
+
+clean=0
+shell=0
+update=0
+debug=0
+boot=0
+ltp=0
+test=0
+gcc=0
+
+ntp=time.fu-berlin.de
+libc=uclibc-ng
+vendor=openadk
+
+while getopts "hgptumdcbn:a:v:s:l:" ch; do
+        case $ch in
+                b)
+                        boot=1
+                        ;;
+                p)
+                        ltp=1
+                        ;;
+                t)
+                        test=1
+                        ;;
+                m)
+                        shell=1
+                        ;;
+                g)
+                        gcc=1
+                        ;;
+                c)
+                        clean=1
+                        ;;
+                u)
+                        update=1
+                        ;;
+                s)
+                        source=$OPTARG
+                        ;;
+                d)
+                        debug=1
+                        ;;
+                l)
+                        libc=$OPTARG
+                        ;;
+                n)
+                        ntp=$OPTARG
+                        ;;
+                a)
+                        archlist=$OPTARG
+                        ;;
+                v)
+                        vendor=$OPTARG
+                        ;;
+		h)
+			help
+			exit 1
+			;;
+        esac
+done
+shift $((OPTIND - 1))
+
+case $libc in
+	uclibc-ng)
+		version=1.0.0beta5
+		libver=uClibc-ng-${version}
+		;;
+	uclibc)
+		version=0.9.33.2
+		libver=uClibc-${version}
+		;;
+	glibc)
+		version=2.19
+		libver=glibc-${version}
+		;;
+	musl)
+		version=1.1.4
+		libver=musl-${version}
+		;;
+	*)
+		echo "c library not supported"
+		exit 1
+esac
+
+if [ -z $archlist ];then
+	if [ $vendor = "openadk" ];then
+		archlist=$ADK_ARCH_LIST
+	fi
+	if [ $vendor = "buildroot" ];then
+		archlist=$BR_ARCH_LIST
+	fi
+fi
+
+case $vendor in
+	openadk)
+		echo "Using OpenADK to check $libc on $archlist"
+		vendor_git=http://git.openadk.org/openadk.git
+		;;
+	buildroot)
+		echo "Using buildroot to check $libc on $archlist"
+		vendor_git=http://git.buildroot.net/git/buildroot.git
+		;;
+	*)
+		echo "Vendor $vendor not supported"
+		exit 1
+		;;
+esac
+
+if [ ! -d $vendor ];then
+	git clone $vendor_git
+	if [ $? -ne 0 ];then
+		echo "Cloning from $vendor_git failed."
+		exit 1
+	fi
+	if [ "$vendor" = "buildroot" ];then
+		wget http://downloads.uclibc-ng.org/buildroot-uClibc-ng.patch
+		(cd buildroot && patch -p1 <../buildroot-uClibc-ng.patch)
+	fi
+else
+	if [ $update -eq 1 ];then
+		(cd $vendor && git pull)
+		if [ $? -ne 0 ];then
+			echo "Updating from $vendor_git failed."
+			exit 1
+		fi
+	fi
+fi
+
+if [ ! -z $source ];then
+	usrc=$(mktemp -d /tmp/XXXX)
+	cp -a $source $usrc/$libver
+	echo "Creating source tarball $vendor/dl/${libver}.tar.xz"
+	mkdir -p $topdir/$vendor/dl 2>/dev/null
+	(cd $usrc && tar cJf $topdir/$vendor/dl/${libver}.tar.xz ${libver} )
+fi
+
+runtest() {
+
+	arch=$1
+	qemu=qemu-system-${arch}
+	qemu_args=
+	qemu_append="ntp_server=$ntp"
+	if [ $debug -eq 0 ];then
+		qemu_append="$qemu_append quiet"
+	fi
+	if [ $shell -eq 1 ];then
+		qemu_append="$qemu_append shell"
+	fi
+	suffix=
+	psuffix=
+	libdir=lib
+	march=${arch}
+
+	case ${arch} in
+		arm) 
+			cpu_arch=arm
+			qemu_machine=vexpress-a9
+			qemu_args="${qemu_args} -cpu cortex-a9 -net user -net nic,model=lan9118"
+			suffix=eabi
+			psuffix=$suffix
+			;;
+		armhf) 
+			cpu_arch=arm
+			march=arm
+			qemu=qemu-system-${cpu_arch}
+			qemu_machine=vexpress-a9
+			qemu_args="${qemu_args} -cpu cortex-a9 -net user -net nic,model=lan9118"
+			suffix=eabihf
+			psuffix=$suffix
+			;;
+		mips) 
+			cpu_arch=mips
+			qemu_machine=malta
+			qemu_args="${qemu_args} -device e1000,netdev=adk0 -netdev user,id=adk0"
+			;;
+		mipsel) 
+			cpu_arch=mipsel
+			march=mips
+			qemu_machine=malta
+			qemu_args="${qemu_args} -device e1000,netdev=adk0 -netdev user,id=adk0"
+			;;
+		mips64) 
+			cpu_arch=mips64
+			qemu_machine=malta
+			qemu_args="${qemu_args} -device e1000,netdev=adk0 -netdev user,id=adk0"
+			suffix=abi32
+			psuffix=o32
+			;;
+		mips64n32) 
+			cpu_arch=mips64
+			march=mips64
+			qemu=qemu-system-${cpu_arch}
+			qemu_machine=malta
+			qemu_args="${qemu_args} -device e1000,netdev=adk0 -netdev user,id=adk0"
+			suffix=abin32
+			psuffix=n32
+			;;
+		mips64n64) 
+			cpu_arch=mips64
+			march=mips64
+			qemu=qemu-system-${cpu_arch}
+			qemu_machine=malta
+			qemu_args="${qemu_args} -device e1000,netdev=adk0 -netdev user,id=adk0"
+			suffix=abi64
+			psuffix=n64
+			;;
+		mips64el) 
+			cpu_arch=mips64el
+			march=mips64
+			qemu_machine=malta
+			qemu_args="${qemu_args} -device e1000,netdev=adk0 -netdev user,id=adk0"
+			suffix=abi32
+			psuffix=o32
+			;;
+		mips64eln32) 
+			cpu_arch=mips64el
+			march=mips64
+			qemu=qemu-system-${cpu_arch}
+			qemu_machine=malta
+			qemu_args="${qemu_args} -device e1000,netdev=adk0 -netdev user,id=adk0"
+			suffix=abin32
+			psuffix=n32
+			;;
+		mips64eln64) 
+			cpu_arch=mips64el
+			march=mips64
+			qemu=qemu-system-${cpu_arch}
+			qemu_machine=malta
+			qemu_args="${qemu_args} -device e1000,netdev=adk0 -netdev user,id=adk0"
+			suffix=abi64
+			psuffix=n64
+			;;
+		ppc-nofpu)
+			cpu_arch=ppc
+			march=ppc
+			qemu=qemu-system-${cpu_arch}
+			qemu_args="${qemu_args} -device e1000,netdev=adk0 -netdev user,id=adk0"
+			qemu_machine=bamboo
+			;;
+		ppc)
+			cpu_arch=ppc
+			march=ppc
+			qemu=qemu-system-${cpu_arch}
+			qemu_args="${qemu_args} -device e1000,netdev=adk0 -netdev user,id=adk0"
+			qemu_machine=mac99
+			;;
+		powerpc64|ppc64) 
+			cpu_arch=ppc64
+			qemu=qemu-system-${cpu_arch}
+			qemu_machine=pseries
+			;;
+		sh) 
+			cpu_arch=sh4
+			qemu=qemu-system-${cpu_arch}
+			qemu_machine=r2d
+			qemu_args="${qemu_args} -monitor null -serial null -serial stdio"
+			;;
+		sheb) 
+			cpu_arch=sh4eb
+			march=sh
+			qemu=qemu-system-${cpu_arch}
+			qemu_machine=r2d
+			qemu_args="${qemu_args} -monitor null -serial null -serial stdio"
+			;;
+		sparc) 
+			cpu_arch=sparc
+			qemu_machine=SS-5
+			;;
+		sparc64) 
+			cpu_arch=sparc64
+			qemu_machine=sun4u
+			qemu_args="${qemu_args} -net nic,model=virtio -net user"
+			;;
+		x86) 
+			cpu_arch=i686
+			qemu=qemu-system-i386
+			qemu_machine=pc
+			qemu_args="${qemu_args} -cpu pentium2"
+			;;
+		x86_64) 
+			cpu_arch=x86_64
+			qemu_machine=pc
+			libdir=lib64
+			;;
+		x86_64_x32) 
+			cpu_arch=x86_64
+			qemu=qemu-system-${cpu_arch}
+			qemu_machine=pc
+			libdir=libx32
+			suffix=x32
+			;;
+		xtensa) 
+			cpu_arch=xtensa
+			qemu=qemu-system-${cpu_arch}
+			qemu_machine=lx60
+			;;
+		*) 
+			echo "architecture ${arch} not supported"; exit 1;;
+	esac
+
+	if ! which $qemu >/dev/null; then
+		echo "Checking if $qemu is installed... failed"
+		exit 1
+	fi
+	qemuver=$(${qemu} -version|awk '{ print $4 }')
+	if [ $(echo $qemuver |sed -e "s#\.##g" -e "s#,##") -lt 200 ];then
+		echo "Your qemu version is too old. Please update to 2.0 or greater"
+		exit 1
+	fi
+
+	cross=${cpu_arch}-${vendor}-linux-uclibc${suffix}
+	if [ -z $psuffix ];then
+		TCPATH=${topdir}/${vendor}/toolchain_qemu-${march}_${libc}_${cpu_arch}
+	else
+		TCPATH=${topdir}/${vendor}/toolchain_qemu-${march}_${libc}_${cpu_arch}_${psuffix}
+	fi
+	export PATH="${TCPATH}/usr/bin:$PATH"
+
+	if ! which ${cross}-gcc >/dev/null; then
+		echo "Checking if ${cross}-gcc is installed... failed"
+		exit 1
+	fi
+
+	echo "Starting test for ${arch}"
+	echo "Generating root filesystem for test run"
+	root=$(mktemp -d /tmp/XXXX)
+	if [ ! -f openadk/firmware/qemu-${march}_${libc}/qemu-${march}-${libc}-initramfsarchive.tar.gz ];then
+		echo "No root filesystem available for architecture ${arch}"
+		exit 1
+	fi
+	tar -xf openadk/firmware/qemu-${march}_${libc}/qemu-${march}-${libc}-initramfsarchive.tar.gz -C $root
+
+	if [ $2 -eq 0 ];then
+cat > ${root}/run.sh << EOF
+#!/bin/sh
+uname -a
+rdate -n \$ntp_server
+file /bin/busybox
+for i in \$(ls /lib/*.so|grep -v libgcc);do
+	size \$i
+done
+exit
+EOF
+	fi
+	if [ $2 -eq 1 ];then
+cat > ${root}/run.sh << EOF
+#!/bin/sh
+uname -a
+rdate -n \$ntp_server
+/opt/ltp/runltp
+exit
+EOF
+	fi
+	if [ $2 -eq 2 ];then
+cat > ${root}/run.sh << EOF
+#!/bin/sh
+uname -a
+rdate -n \$ntp_server
+cd /opt/$libc/test
+CROSS_COMPILE=": ||" make UCLIBC_ONLY=y -k run
+exit
+EOF
+	fi
+	chmod u+x ${root}/run.sh
+
+	kernel=openadk/firmware/qemu-${march}_${libc}/qemu-${march}-initramfsarchive-kernel
+
+	echo "Creating initramfs filesystem"
+	(cd $root; find . | cpio -o -C512 -Hnewc --quiet |xz --check=crc32 --stdout > ${topdir}/initramfs.${arch})
+	rm -rf $root
+
+	echo "Now running the tests in qemu for architecture ${arch}"
+	echo "${qemu} -M ${qemu_machine} ${qemu_args} -append ${qemu_append} -kernel ${kernel} -qmp tcp:127.0.0.1:4444,server,nowait -no-reboot -nographic -initrd initramfs.${arch}"
+	${qemu} -M ${qemu_machine} ${qemu_args} -append "${qemu_append}" -kernel ${kernel} -qmp tcp:127.0.0.1:4444,server,nowait -no-reboot -nographic -initrd initramfs.${arch} | tee REPORT.${arch}
+	if [ $? -eq 0 ];then
+		echo "Test for ${arch} finished. See REPORT.${arch}."
+		echo 
+	else
+		echo "Test failed for ${arch}."
+		echo 
+	fi
+}
+
+create_buildroot_defconfig_arcle() {
+	cat > configs/arcle_defconfig << EOD
+BR2_arcle=y
+
+BR2_TOOLCHAIN_BUILDROOT_UCLIBC_NG=y
+BR2_KERNEL_HEADERS_3_15=y
+BR2_DEFAULT_KERNEL_HEADERS="3.15.6"
+BR2_BINUTILS_VERSION_2_24=y
+BR2_GCC_VERSION_4_8_X=y
+BR2_TOOLCHAIN_HAS_THREADS=y
+EOD
+}
+
+create_buildroot_defconfig_arcbe() {
+	cat > configs/arcbe_defconfig << EOD
+BR2_arcle=y
+
+BR2_TOOLCHAIN_BUILDROOT_UCLIBC_NG=y
+BR2_KERNEL_HEADERS_3_15=y
+BR2_DEFAULT_KERNEL_HEADERS="3.15.6"
+BR2_BINUTILS_VERSION_2_24=y
+BR2_GCC_VERSION_4_8_X=y
+BR2_TOOLCHAIN_HAS_THREADS=y
+EOD
+}
+
+create_buildroot_defconfig_bfin() {
+	cat > configs/bfin_defconfig << EOD
+BR2_bfin=y
+BR2_BINFMT_FDPIC=y
+BR2_bf609=y
+
+BR2_TOOLCHAIN_BUILDROOT_UCLIBC_NG=y
+BR2_KERNEL_HEADERS_3_15=y
+BR2_DEFAULT_KERNEL_HEADERS="3.15.6"
+BR2_BINUTILS_VERSION_2_22=y
+BR2_GCC_VERSION_4_5_X=y
+BR2_TOOLCHAIN_HAS_THREADS=y
+EOD
+}
+
+build_buildroot() {
+	cd buildroot
+	case $1 in
+		arcle)
+			create_buildroot_defconfig_arcle
+			make arcle_defconfig
+			make clean all
+			;;
+		arcbe)
+			create_buildroot_defconfig_arcbe
+			make arcbe_defconfig
+			make clean all
+			;;
+		arm)
+			make qemu_arm_vexpress_defconfig
+			make clean all
+			;;
+		bfin)
+			create_buildroot_defconfig_bfin
+			make bfin_defconfig
+			make clean all
+			;;
+		mips)
+			make qemu_mips_malta_defconfig
+			make clean all
+			;;
+		mipsel)
+			make qemu_mipsel_malta_defconfig
+			make clean all
+			;;
+		mips64)
+			make qemu_mips64_malta_defconfig
+			make clean all
+			;;
+		mips64el)
+			make qemu_mips64el_malta_defconfig
+			make clean all
+			;;
+		ppc)
+			make qemu_ppc_mpc8544ds_defconfig
+			make clean all
+			;;
+		sh)
+			make qemu_sh4_r2d_defconfig
+			make clean all
+			;;
+		sparc)
+			make qemu_sparc_ss10_defconfig
+			make clean all
+			;;
+		x86)
+			make qemu_x86_defconfig
+			make clean all
+			;;
+		x86_64)
+			make qemu_x86_64_defconfig
+			make clean all
+			;;
+		xtensa)
+			make qemu_xtensa_lx60_defconfig
+			make clean all
+			;;
+		*)
+			echo "architecture not supported in buildroot"
+			exit 1
+			;;
+	esac
+}
+
+build_openadk() {
+	cd openadk
+	# start with a clean dir
+	if [ $clean -eq 1 ];then
+		make cleandir
+	fi
+	DEFAULT="ADK_TARGET_LIBC=$libc ADK_TARGET_FS=initramfsarchive ADK_TARGET_COLLECTION=test"
+	if [ $debug -eq 1 ];then
+		DEFAULT="$DEFAULT VERBOSE=1"
+	fi
+	if [ ! -z $source ];then
+		DEFAULT="$DEFAULT ADK_NO_CHECKSUM=1"
+	fi
+	if [ $2 -eq 0 ];then
+		DEFAULT="$DEFAULT ADK_TEST_BASE=y"
+	fi
+	if [ $2 -eq 1 ];then
+		DEFAULT="$DEFAULT ADK_TEST_LTP=y"
+	fi
+	if [ $2 -eq 2 ];then
+		case $libc in
+			uclibc-ng)
+				DEFAULT="$DEFAULT ADK_TEST_UCLIBC_NG_TESTSUITE=y"
+				;;
+			uclibc)
+				DEFAULT="$DEFAULT ADK_TEST_UCLIBC_TESTSUITE=y"
+				;;
+			*)
+				echo "test suite not available"
+				exit 1
+				;;
+		esac
+		make package=$libc clean
+	fi
+	if [ $2 -eq 3 ];then
+		case $libc in
+			uclibc-ng)
+				DEFAULT="$DEFAULT ADK_TEST_UCLIBC_NG_NATIVE=y"
+				;;
+			uclibc)
+				DEFAULT="$DEFAULT ADK_TEST_UCLIBC_NATIVE=y"
+				;;
+			*)
+				echo "native build not available"
+				exit 1
+				;;
+		esac
+	fi
+	case $1 in
+		arm)
+			make $DEFAULT ADK_TARGET_ARCH=arm ADK_TARGET_SYSTEM=qemu-arm ADK_TARGET_ABI=eabi ADK_TARGET_ENDIAN=little defconfig all
+			;;
+		armhf)
+			make $DEFAULT ADK_TARGET_ARCH=arm ADK_TARGET_SYSTEM=qemu-arm ADK_TARGET_ABI=eabihf ADK_TARGET_ENDIAN=little defconfig all
+			;;
+		m68k-nommu)
+			make $DEFAULT ADK_TARGET_ARCH=m68k ADK_TARGET_SYSTEM=qemu-m68k defconfig all
+			;;
+		mips)
+			make $DEFAULT ADK_TARGET_ARCH=mips ADK_TARGET_SYSTEM=qemu-mips ADK_TARGET_ENDIAN=big defconfig all
+			;;
+		mipsel)
+			make $DEFAULT ADK_TARGET_ARCH=mips ADK_TARGET_SYSTEM=qemu-mips ADK_TARGET_ENDIAN=little defconfig all
+			;;
+		mips64)
+			make $DEFAULT ADK_TARGET_ARCH=mips64 ADK_TARGET_SYSTEM=qemu-mips64 ADK_TARGET_ENDIAN=big ADK_TARGET_ABI=o32 defconfig all
+			;;
+		mips64n32)
+			make $DEFAULT ADK_TARGET_ARCH=mips64 ADK_TARGET_SYSTEM=qemu-mips64 ADK_TARGET_ENDIAN=big ADK_TARGET_ABI=n32 defconfig all
+			;;
+		mips64n64)
+			make $DEFAULT ADK_TARGET_ARCH=mips64 ADK_TARGET_SYSTEM=qemu-mips64 ADK_TARGET_ENDIAN=big ADK_TARGET_ABI=n64 defconfig all
+			;;
+		mips64el)
+			make $DEFAULT ADK_TARGET_ARCH=mips64 ADK_TARGET_SYSTEM=qemu-mips64 ADK_TARGET_ENDIAN=little ADK_TARGET_ABI=o32 defconfig all
+			;;
+		mips64eln32)
+			make $DEFAULT ADK_TARGET_ARCH=mips64 ADK_TARGET_SYSTEM=qemu-mips64 ADK_TARGET_ENDIAN=little ADK_TARGET_ABI=n32 defconfig all
+			;;
+		mips64eln64)
+			make $DEFAULT ADK_TARGET_ARCH=mips64 ADK_TARGET_SYSTEM=qemu-mips64 ADK_TARGET_ENDIAN=little ADK_TARGET_ABI=n64 defconfig all
+			;;
+		ppc-nofpu)
+			make $DEFAULT ADK_TARGET_ARCH=ppc ADK_TARGET_SYSTEM=qemu-ppc defconfig all
+			;;
+		sh)
+			make $DEFAULT ADK_TARGET_ARCH=sh ADK_TARGET_SYSTEM=qemu-sh ADK_TARGET_ENDIAN=little defconfig all
+			;;
+		sheb)
+			make $DEFAULT ADK_TARGET_ARCH=sh ADK_TARGET_SYSTEM=qemu-sh ADK_TARGET_ENDIAN=big defconfig all
+			;;
+		*)
+			make $DEFAULT ADK_TARGET_ARCH=$1 ADK_TARGET_SYSTEM=qemu-$1 defconfig all
+			;;
+	esac
+	if [ $? -ne 0 ];then
+		echo "build failed"
+		exit 1
+	fi
+	cd ..
+}	
+
+echo "compiling base system and toolchain"
+
+if [ "$vendor" = "buildroot" ];then
+	for arch in ${archlist}; do
+		build_buildroot $arch 0
+	done
+fi
+
+if [ "$vendor" = "openadk" ];then
+	for arch in ${archlist}; do
+		build_openadk $arch 99
+		if [ $boot -eq 1 ];then
+			case $arch in
+			m68k-nommu|ppc|sheb|xtensa|mips64eln32|mips64n32)
+				echo "runtime tests disabled for $arch."
+				;;
+			*)
+				build_openadk $arch 0
+				runtest $arch 0
+				;;
+			esac
+		fi
+		if [ $ltp -eq 1 ];then
+			case $arch in
+			m68k-nommu|ppc|sheb|xtensa|mips64eln32|mips64n32)
+				echo "runtime tests disabled for $arch."
+				;;
+			*)
+				build_openadk $arch 1
+				runtest $arch 1
+				;;
+			esac
+		fi
+		if [ $test -eq 1 ];then
+			case $arch in
+			m68k-nommu|ppc|sheb|xtensa|mips64eln32|mips64n32)
+				echo "runtime tests disabled for $arch."
+				;;
+			*)
+				build_openadk $arch 2
+				runtest $arch 2
+				;;
+			esac
+		fi
+		if [ $gcc -eq 1 ];then
+			case $arch in
+			m68k-nommu|ppc|sheb|xtensa|mips64eln32|mips64n32)
+				echo "runtime tests disabled for $arch."
+				;;
+			*)
+				build_openadk $arch 3
+				runtest $arch 3
+				;;
+			esac
+		fi
+	done
+fi
+
+echo "All tests finished."
+exit 0